Subversion Repositories openrisc

-- C45532O.DEP

--                             Grant of Unlimited Rights

--

--     Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687,

--     F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained

--     unlimited rights in the software and documentation contained herein.

--     Unlimited rights are defined in DFAR 252.227-7013(a)(19).  By making

--     this public release, the Government intends to confer upon all

--     recipients unlimited rights  equal to those held by the Government.

--     These rights include rights to use, duplicate, release or disclose the

--     released technical data and computer software in whole or in part, in

--     any manner and for any purpose whatsoever, and to have or permit others

--     to do so.

--

--                                    DISCLAIMER

--

--     ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR

--     DISCLOSED ARE AS IS.  THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED

--     WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE

--     SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE

--     OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A

--     PARTICULAR PURPOSE OF SAID MATERIAL.

--*

-- OBJECTIVE:

--     CHECK THAT THE OPERATOR "*" PRODUCES CORRECT RESULTS

--     FOR FIXED POINT TYPES USING 3 SUBTESTS.

--       THIS TEST REQUIRES MIN_WORD_LENGTH = 48.

--       THIS TEST USES VALUES OF DELTA WHICH ARE GREATER THAN OR

--       EQUAL TO 0.5.

--

--     TEST CASES ARE:

--       A) THE OPERATOR *, A, B, AND A * B ALL MODEL NUMBERS.

--       B) THE OPERATOR *, A, B MODEL NUMBERS A * B NOT.

--       C) THE OPERATOR *, USING NO MODEL NUMBERS.

--

--     REPEAT FOR MINIMUM REQUIRED WORD LENGTHS OF 12, 16, 32 AND 48,

--     WITH RANGE <, =, AND > THAN 1.0 AND

--     WITH DELTA <, =, AND > THAN 1.0.

-- APPLICABILITY CRITERIA:

--     THIS TEST IS APPLICABLE FOR IMPLEMENTATIONS WHICH HAVE A

--     'MAX_MANTISSA OF 47 OR GREATER.

--     IF 'MAX_MANTISSA >= 47 IS NOT SUPPORTED THEN THE DECLARATION OF

--     'TYPE FX_OP5' MUST BE REJECTED.

-- HISTORY:

--     NTW 09/08/86 CREATED ORIGINAL TEST.

--     RJW 11/05/86 REVISED COMMENTS.

--     DHH 01/13/88 ADDED APPLICABILITY CRITERIA AND STANDARD HEADER.

--     RDH 04/27/90 REVISED APPLICABILITY CRITERIA.

WITH REPORT;

PROCEDURE C45532O IS

     USE REPORT;

     MIN_WORD_LENGTH : CONSTANT := 48;

     FULL_SCALE      : CONSTANT := 2 ** (MIN_WORD_LENGTH - 1);

     FORTH           : CONSTANT := FULL_SCALE / 4;

     RNG1            : CONSTANT := FULL_SCALE * 0.5;

     TYPE FX_0P5  IS DELTA 0.5 RANGE -RNG1 * 1 .. RNG1 * 1 - 0.5;

                                                        -- N/A => ERROR.

     TYPE FX_1    IS DELTA 1.0 RANGE -RNG1 * 2 .. RNG1 * 2 - 1.0;

     TYPE FX_RNG1 IS DELTA RNG1

                    RANGE -RNG1 * FULL_SCALE .. RNG1 * (FULL_SCALE - 1);

BEGIN TEST ("C45532O", "FIXED POINT OPERATOR ""*""" );

     --------------------------------------------------

     -- CASE A) THE OPERATOR *, A, B, AND A * B ALL MODEL NUMBERS.

A:   DECLARE

          A              : FX_0P5  := 0.0;

          B              : FX_1    := 0.0;

          RESULT_VALUE   : FX_RNG1 := 0.0;

          LOWEST_ACCEPTABLE_VALUE

                         : FX_RNG1 := FX_RNG1 (RNG1 * RNG1 / 4);

          HIGHEST_ACCEPTABLE_VALUE

                         : FX_RNG1 := FX_RNG1 (RNG1 * RNG1 / 4);

     BEGIN

          IF EQUAL (3, 3) THEN

               A := FX_0P5 (RNG1 / 2);            -- A MODEL NUMBER

               B := FX_1   (RNG1 / 2);            -- A MODEL NUMBER

          END IF;

          RESULT_VALUE := FX_RNG1 (A * B);

          IF    (RESULT_VALUE < LOWEST_ACCEPTABLE_VALUE)

             OR (RESULT_VALUE > HIGHEST_ACCEPTABLE_VALUE) THEN

               FAILED ("RESULT OF ""*"" OUTSIDE RESULT MODEL INTERVAL "

                    &  "WHEN A, B, AND A * B ARE ALL MODEL NUMBERS");

          END IF;

     END A;

     --------------------------------------------------

     -- CASE B) THE OPERATOR *, A, B MODEL NUMBERS A * B NOT.

B:   DECLARE

          A              : FX_0P5  := 0.0;

          B              : FX_0P5  := 0.0;

          RESULT_VALUE   : FX_RNG1 := 0.0;

          LOW_COUNT     : CONSTANT := FULL_SCALE / 16;

          HIGH_COUNT    : CONSTANT := LOW_COUNT + 1;

          LOWEST_ACCEPTABLE_VALUE  :  FX_RNG1

                                   := FX_RNG1 (RNG1 * LOW_COUNT);

          HIGHEST_ACCEPTABLE_VALUE :  FX_RNG1

                                   := FX_RNG1 (RNG1 * HIGH_COUNT);

     BEGIN

          IF EQUAL (3, 3) THEN

               A := FX_0P5 (0.5 * (FORTH + 1) );  -- A MODEL NUMBER

               B := FX_0P5 (0.5 * (FORTH * 2) );  -- A MODEL NUMBER

          END IF;

          RESULT_VALUE := FX_RNG1 (A * B);

          IF    (RESULT_VALUE < LOWEST_ACCEPTABLE_VALUE)

             OR (RESULT_VALUE > HIGHEST_ACCEPTABLE_VALUE) THEN

               FAILED ("RESULT OF ""*"" OUTSIDE RESULT MODEL INTERVAL "

                    &  "WHEN A, B MODEL NUMBERS A * B NOT");

          END IF;

     END B;

     --------------------------------------------------

     -- CASE C) THE OPERATOR *, USING NO MODEL NUMBERS

C:   DECLARE

          A              : FX_1    := 0.0;

          B              : FX_1    := 0.0;

          RESULT_VALUE   : FX_RNG1    := 0.0;

          LOW_COUNT     : CONSTANT := FULL_SCALE / 32 - 1;

          HIGH_COUNT    : CONSTANT := FULL_SCALE / 32 + 1;

          LOWEST_ACCEPTABLE_VALUE  :  FX_RNG1

                                   := FX_RNG1 (RNG1 * LOW_COUNT);

          HIGHEST_ACCEPTABLE_VALUE :  FX_RNG1

                                   := FX_RNG1 (RNG1 * HIGH_COUNT);

     BEGIN

          IF EQUAL (3, 3) THEN

               A := FX_1 (0.5 * (FORTH + 1) );    -- NOT MODEL NUMBER

               B := FX_1 (0.5 * (FORTH - 1) );    -- NOT MODEL NUMBER

          END IF;

          RESULT_VALUE := FX_RNG1 (A * B);

          IF    (RESULT_VALUE < LOWEST_ACCEPTABLE_VALUE)

             OR (RESULT_VALUE > HIGHEST_ACCEPTABLE_VALUE) THEN

               FAILED ("RESULT OF ""*"" OUTSIDE RESULT MODEL INTERVAL "

                    &  "WHEN USING NO MODEL NUMBERS");

          END IF;

     END C;

     --------------------------------------------------

     RESULT;

END C45532O;