Subversion Repositories openrisc

-- CXF3A07.A

--

--                             Grant of Unlimited Rights

--

--     Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687,

--     F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained

--     unlimited rights in the software and documentation contained herein.

--     Unlimited rights are defined in DFAR 252.227-7013(a)(19).  By making

--     this public release, the Government intends to confer upon all

--     recipients unlimited rights  equal to those held by the Government.

--     These rights include rights to use, duplicate, release or disclose the

--     released technical data and computer software in whole or in part, in

--     any manner and for any purpose whatsoever, and to have or permit others

--     to do so.

--

--                                    DISCLAIMER

--

--     ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR

--     DISCLOSED ARE AS IS.  THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED

--     WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE

--     SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE

--     OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A

--     PARTICULAR PURPOSE OF SAID MATERIAL.

--*

--

-- OBJECTIVE:

--      Check that Ada.Text_IO.Editing.Put and Ada.Strings.Fixed.Move

--      have the same effect in putting edited output results into string

--      variables.

--

-- TEST DESCRIPTION:

--      This test is structured using tables of data, consisting of

--      numerical values, picture strings, and expected image

--      result strings.  These data tables are found in package FXF3A00.

--

--      The operation of the two above subprograms are examined twice, first

--      with the output of an edited output string to a receiving string

--      object of equal size, the other to a receiving string object of

--      larger size, where justification and padding are considered.

--      The procedure Editing.Put will place an edited output string into

--      a larger receiving string with right justification and blank fill.

--      Procedure Move has parameter control of justification and fill, and

--      in this test will mirror Put by specifying right justification and

--      blank fill.

--

--      In the cases where the edited output string is of shorter length

--      than the receiving string object, a blank-filled constant string

--      will be catenated to the front of the expected edited output string

--      for comparison with the receiving string object, enabling direct

--      string comparison for result verification.

--

-- TEST FILES:

--      The following files comprise this test:

--

--         FXF3A00.A   (foundation code)

--      => CXF3A07.A

--

--

-- CHANGE HISTORY:

--      30 JAN 95   SAIC    Initial prerelease version.

--      11 MAR 97   PWB.CTA Fixed string lengths

--!

with FXF3A00;

with Ada.Text_IO.Editing;

with Ada.Strings.Fixed;

with Report;

procedure CXF3A07 is

begin

   Report.Test ("CXF3A07", "Check that Ada.Text_IO.Editing.Put and "  &

                           "Ada.Strings.Fixed.Move have the same "    &

                           "effect in putting edited output results " &

                           "into string variables");

   Test_Block:

   declare

      use Ada.Text_IO;

      -- Instantiate the Decimal_Output generic package for two

      -- different decimal data types.

      package Pack_2DP is          -- Uses decimal type with delta 0.01.

        new Editing.Decimal_Output(FXF3A00.Decimal_Type_2DP);

      package Pack_NDP is          -- Uses decimal type with delta 1.0.

        new Editing.Decimal_Output(Num => FXF3A00.Decimal_Type_NDP,

                                   Default_Currency   => "$",

                                   Default_Fill       => '*',

                                   Default_Separator  => ',',

                                   Default_Radix_Mark => '.');

      TC_Picture     : Editing.Picture;

      TC_Start_Loop  : Integer := 0;

      TC_End_Loop    : Integer := 0;

      TC_Offset      : Integer := 0;

      TC_Length      : Natural := 0;

      TC_Put_String_20,                   -- Longer than the longest edited

      TC_Move_String_20 : String(1..20);  -- output string.

      TC_Put_String_17,                   -- Exact length of longest edited

      TC_Move_String_17 : String(1..17);  -- output string in 2DP-US data set.

      TC_Put_String_8,                    -- Exact length of longest edited

      TC_Move_String_8  : String(1..8);   -- output string in NDP-US data set.

   begin

      -- Examine cases where the output string is longer than the length

      -- of the edited output result.  Use the instantiation of

      -- Decimal_Output specific to data with two decimal places.

      TC_Start_Loop := 1;

      TC_End_Loop   := FXF3A00.Number_of_2DP_Items -              -- 10

                       FXF3A00.Number_Of_Foreign_Strings;

      for i in TC_Start_Loop..TC_End_Loop loop                    -- 1..10

         -- Create the picture object from the picture string.

         TC_Picture := Editing.To_Picture(FXF3A00.Valid_Strings(i).all,

                                          Blank_When_Zero => False);

         -- Determine the actual length of the edited output string

         -- that is expected from Put and Image.

         TC_Length := Pack_2DP.Length(Pic      => TC_Picture,

                                      Currency => "$");

         -- Determine the difference in length between the receiving string

         -- object and the expected length of the edited output string.

         -- Define a blank filled string constant with length equal to this

         -- length difference.

         declare

            TC_Length_Diff   : Integer := TC_Put_String_20'Length -

                                          TC_Length;

            TC_Buffer_String : constant String(1..TC_Length_Diff) :=

                                          (others => ' ');

         begin

            -- Fill the two receiving string objects with edited output,

            -- using the two different methods (Put and Move).

            Pack_2DP.Put(To         => TC_Put_String_20,

                         Item       => FXF3A00.Data_With_2DP(i),

                         Pic        => TC_Picture,

                         Currency   => "$",

                         Fill       => '*',

                         Separator  => ',',

                         Radix_Mark => '.');

            Ada.Strings.Fixed.Move

              (Source  => Pack_2DP.Image(Item => FXF3A00.Data_With_2DP(i),

                                         Pic        => TC_Picture,

                                         Currency   => "$",

                                         Fill       => '*',

                                         Separator  => ',',

                                         Radix_Mark => '.'),

               Target  => TC_Move_String_20,

               Drop    => Ada.Strings.Error,

               Justify => Ada.Strings.Right,

               Pad     => Ada.Strings.Space);

            -- Each receiving string object is now filled with the edited

            -- output result, right justified.

            -- Compare these two string objects with the expected edited

            -- output value, which is appended to the blank filled string

            -- whose length is the difference between the expected edited

            -- output length and the length of the receiving strings.

            if TC_Buffer_String & FXF3A00.Edited_Output(i).all  /=

               TC_Put_String_20                                    or

               TC_Buffer_String & FXF3A00.Edited_Output(i).all  /=

               TC_Move_String_20

            then

               Report.Failed("Failed case where the output string is " &

                             "longer than the length of the edited "   &

                             "output result, loop #" & Integer'Image(i));

            end if;

         exception

            when Layout_Error =>

               Report.Failed("Layout_Error raised when the output string " &

                             "is longer than the length of the edited "    &

                             "output result, loop #" & Integer'Image(i));

            when others       =>

               Report.Failed("Exception raised when the output string is " &

                             "longer than the length of the edited "       &

                             "output result, loop #" & Integer'Image(i));

         end;

      end loop;

      -- Repeat the above loop, but only evaluate three cases - those where

      -- the length of the expected edited output string is the exact length

      -- of the receiving strings (no justification will be required within

      -- the string.  This series of evaluations again uses decimal data

      -- with two decimal places.

      for i in TC_Start_Loop..TC_End_Loop loop                    -- 1..10

         case i is

            when 1 | 5 | 7 =>

               -- Create the picture object from the picture string.

               TC_Picture :=

                 Editing.To_Picture(FXF3A00.Valid_Strings(i).all);

               -- Fill the two receiving string objects with edited output,

               -- using the two different methods (Put and Move).

               -- Use default parameters in the various calls where possible.

               Pack_2DP.Put(To         => TC_Put_String_17,

                            Item       => FXF3A00.Data_With_2DP(i),

                            Pic        => TC_Picture);

               Ada.Strings.Fixed.Move

                 (Source  => Pack_2DP.Image(Item => FXF3A00.Data_With_2DP(i),

                                            Pic  => TC_Picture),

                  Target  => TC_Move_String_17);

               -- Each receiving string object is now filled with the edited

               -- output result. Compare these two string objects with the

               -- expected edited output value.

               if FXF3A00.Edited_Output(i).all  /= TC_Put_String_17  or

                  FXF3A00.Edited_Output(i).all  /= TC_Move_String_17

               then

                  Report.Failed("Failed case where the output string is " &

                                "the exact length of the edited output "  &

                                "result, loop #" & Integer'Image(i));

               end if;

            when others => null;

         end case;

      end loop;

      -- Evaluate a mix of cases, where the expected edited output string

      -- length is either exactly as long or shorter than the receiving

      -- output string parameter.  This series of evaluations uses decimal

      -- data with no decimal places.

      TC_Start_Loop := TC_End_Loop + 1;                           -- 11

      TC_End_Loop   := TC_Start_Loop +                            -- 22

                       FXF3A00.Number_of_NDP_Items - 1;

      TC_Offset     := FXF3A00.Number_of_Foreign_Strings;         -- 10

      -- This offset is required due to the arrangement of data within the

      -- tables found in FXF3A00.

      for i in TC_Start_Loop..TC_End_Loop loop                    -- 11..22

         -- Create the picture object from the picture string.

         TC_Picture := Editing.To_Picture(FXF3A00.Valid_Strings(i).all);

         -- Determine the actual length of the edited output string

         -- that is expected from Put and Image.

         TC_Length := Pack_NDP.Length(TC_Picture);

         -- Fill the two receiving string objects with edited output,

         -- using the two different methods (Put and Move).

         Pack_NDP.Put(TC_Put_String_8,

                      FXF3A00.Data_With_NDP(i-TC_Offset),

                      TC_Picture);

         Ada.Strings.Fixed.Move

           (Pack_NDP.Image(FXF3A00.Data_With_NDP(i-TC_Offset), TC_Picture),

            TC_Move_String_8,

            Ada.Strings.Error,

            Ada.Strings.Right,

            Ada.Strings.Space);

         -- Determine if there is a difference in length between the

         -- receiving string object and the expected length of the edited

         -- output string.  If so, then define a blank filled string constant

         -- with length equal to this length difference.

         if TC_Length < TC_Put_String_8'Length then

            declare

               TC_Length_Diff   : Integer := TC_Put_String_8'Length -

                                             TC_Length;

               TC_Buffer_String : constant String(1..TC_Length_Diff) :=

                                          (others => ' ');

            begin

               -- Each receiving string object is now filled with the edited

               -- output result, right justified.

               -- Compare these two string objects with the expected edited

               -- output value, which is appended to the blank filled string

               -- whose length is the difference between the expected edited

               -- output length and the length of the receiving strings.

               if TC_Buffer_String & FXF3A00.Edited_Output(i+TC_Offset).all /=

                  TC_Put_String_8                                           or

                  TC_Buffer_String & FXF3A00.Edited_Output(i+TC_Offset).all /=

                  TC_Move_String_8

               then

                  Report.Failed("Failed case where the output string is "  &

                                "longer than the length of the edited "    &

                                "output result, loop #" & Integer'Image(i) &

                                ", using data with no decimal places");

               end if;

            end;

         else

            -- Compare these two string objects with the expected edited

            -- output value, which is appended to the blank filled string

            -- whose length is the difference between the expected edited

            -- output length and the length of the receiving strings.

            if FXF3A00.Edited_Output(i+TC_Offset).all /= TC_Put_String_8 or

               FXF3A00.Edited_Output(i+TC_Offset).all /= TC_Move_String_8

            then

               Report.Failed("Failed case where the output string is "  &

                             "the same length as the edited output "    &

                             "result, loop #" & Integer'Image(i)        &

                             ", using data with no decimal places");

            end if;

         end if;

      end loop;

   exception

      when others => Report.Failed("Exception raised in Test_Block");

   end Test_Block;

   Report.Result;

end CXF3A07;