Subversion Repositories openrisc

/* Object file "section" support for the BFD library.

   Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,

   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009

   Free Software Foundation, Inc.

   Written by Cygnus Support.

   This file is part of BFD, the Binary File Descriptor library.

   This program is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 3 of the License, or

   (at your option) any later version.

   This program is distributed in the hope that it will be useful,

   but WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License

   along with this program; if not, write to the Free Software

   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,

   MA 02110-1301, USA.  */

/*

SECTION

        Sections

        The raw data contained within a BFD is maintained through the

        section abstraction.  A single BFD may have any number of

        sections.  It keeps hold of them by pointing to the first;

        each one points to the next in the list.

        Sections are supported in BFD in <<section.c>>.

@menu

@* Section Input::

@* Section Output::

@* typedef asection::

@* section prototypes::

@end menu

INODE

Section Input, Section Output, Sections, Sections

SUBSECTION

        Section input

        When a BFD is opened for reading, the section structures are

        created and attached to the BFD.

        Each section has a name which describes the section in the

        outside world---for example, <<a.out>> would contain at least

        three sections, called <<.text>>, <<.data>> and <<.bss>>.

        Names need not be unique; for example a COFF file may have several

        sections named <<.data>>.

        Sometimes a BFD will contain more than the ``natural'' number of

        sections. A back end may attach other sections containing

        constructor data, or an application may add a section (using

        <<bfd_make_section>>) to the sections attached to an already open

        BFD. For example, the linker creates an extra section

        <<COMMON>> for each input file's BFD to hold information about

        common storage.

        The raw data is not necessarily read in when

        the section descriptor is created. Some targets may leave the

        data in place until a <<bfd_get_section_contents>> call is

        made. Other back ends may read in all the data at once.  For

        example, an S-record file has to be read once to determine the

        size of the data. An IEEE-695 file doesn't contain raw data in

        sections, but data and relocation expressions intermixed, so

        the data area has to be parsed to get out the data and

        relocations.

INODE

Section Output, typedef asection, Section Input, Sections

SUBSECTION

        Section output

        To write a new object style BFD, the various sections to be

        written have to be created. They are attached to the BFD in

        the same way as input sections; data is written to the

        sections using <<bfd_set_section_contents>>.

        Any program that creates or combines sections (e.g., the assembler

        and linker) must use the <<asection>> fields <<output_section>> and

        <<output_offset>> to indicate the file sections to which each

        section must be written.  (If the section is being created from

        scratch, <<output_section>> should probably point to the section

        itself and <<output_offset>> should probably be zero.)

        The data to be written comes from input sections attached

        (via <<output_section>> pointers) to

        the output sections.  The output section structure can be

        considered a filter for the input section: the output section

        determines the vma of the output data and the name, but the

        input section determines the offset into the output section of

        the data to be written.

        E.g., to create a section "O", starting at 0x100, 0x123 long,

        containing two subsections, "A" at offset 0x0 (i.e., at vma

        0x100) and "B" at offset 0x20 (i.e., at vma 0x120) the <<asection>>

        structures would look like:

|   section name          "A"

|     output_offset   0x00

|     size            0x20

|     output_section ----------->  section name    "O"

|                             |    vma             0x100

|   section name          "B" |    size            0x123

|     output_offset   0x20    |

|     size            0x103   |

|     output_section  --------|

SUBSECTION

        Link orders

        The data within a section is stored in a @dfn{link_order}.

        These are much like the fixups in <<gas>>.  The link_order

        abstraction allows a section to grow and shrink within itself.

        A link_order knows how big it is, and which is the next

        link_order and where the raw data for it is; it also points to

        a list of relocations which apply to it.

        The link_order is used by the linker to perform relaxing on

        final code.  The compiler creates code which is as big as

        necessary to make it work without relaxing, and the user can

        select whether to relax.  Sometimes relaxing takes a lot of

        time.  The linker runs around the relocations to see if any

        are attached to data which can be shrunk, if so it does it on

        a link_order by link_order basis.

*/

#include "sysdep.h"

#include "bfd.h"

#include "libbfd.h"

#include "bfdlink.h"

/*

DOCDD

INODE

typedef asection, section prototypes, Section Output, Sections

SUBSECTION

        typedef asection

        Here is the section structure:

CODE_FRAGMENT

.

.typedef struct bfd_section

.{

.  {* The name of the section; the name isn't a copy, the pointer is

.     the same as that passed to bfd_make_section.  *}

.  const char *name;

.

.  {* A unique sequence number.  *}

.  int id;

.

.  {* Which section in the bfd; 0..n-1 as sections are created in a bfd.  *}

.  int index;

.

.  {* The next section in the list belonging to the BFD, or NULL.  *}

.  struct bfd_section *next;

.

.  {* The previous section in the list belonging to the BFD, or NULL.  *}

.  struct bfd_section *prev;

.

.  {* The field flags contains attributes of the section. Some

.     flags are read in from the object file, and some are

.     synthesized from other information.  *}

.  flagword flags;

.

.#define SEC_NO_FLAGS   0x000

.

.  {* Tells the OS to allocate space for this section when loading.

.     This is clear for a section containing debug information only.  *}

.#define SEC_ALLOC      0x001

.

.  {* Tells the OS to load the section from the file when loading.

.     This is clear for a .bss section.  *}

.#define SEC_LOAD       0x002

.

.  {* The section contains data still to be relocated, so there is

.     some relocation information too.  *}

.#define SEC_RELOC      0x004

.

.  {* A signal to the OS that the section contains read only data.  *}

.#define SEC_READONLY   0x008

.

.  {* The section contains code only.  *}

.#define SEC_CODE       0x010

.

.  {* The section contains data only.  *}

.#define SEC_DATA       0x020

.

.  {* The section will reside in ROM.  *}

.#define SEC_ROM        0x040

.

.  {* The section contains constructor information. This section

.     type is used by the linker to create lists of constructors and

.     destructors used by <<g++>>. When a back end sees a symbol

.     which should be used in a constructor list, it creates a new

.     section for the type of name (e.g., <<__CTOR_LIST__>>), attaches

.     the symbol to it, and builds a relocation. To build the lists

.     of constructors, all the linker has to do is catenate all the

.     sections called <<__CTOR_LIST__>> and relocate the data

.     contained within - exactly the operations it would peform on

.     standard data.  *}

.#define SEC_CONSTRUCTOR 0x080

.

.  {* The section has contents - a data section could be

.     <<SEC_ALLOC>> | <<SEC_HAS_CONTENTS>>; a debug section could be

.     <<SEC_HAS_CONTENTS>>  *}

.#define SEC_HAS_CONTENTS 0x100

.

.  {* An instruction to the linker to not output the section

.     even if it has information which would normally be written.  *}

.#define SEC_NEVER_LOAD 0x200

.

.  {* The section contains thread local data.  *}

.#define SEC_THREAD_LOCAL 0x400

.

.  {* The section has GOT references.  This flag is only for the

.     linker, and is currently only used by the elf32-hppa back end.

.     It will be set if global offset table references were detected

.     in this section, which indicate to the linker that the section

.     contains PIC code, and must be handled specially when doing a

.     static link.  *}

.#define SEC_HAS_GOT_REF 0x800

.

.  {* The section contains common symbols (symbols may be defined

.     multiple times, the value of a symbol is the amount of

.     space it requires, and the largest symbol value is the one

.     used).  Most targets have exactly one of these (which we

.     translate to bfd_com_section_ptr), but ECOFF has two.  *}

.#define SEC_IS_COMMON 0x1000

.

.  {* The section contains only debugging information.  For

.     example, this is set for ELF .debug and .stab sections.

.     strip tests this flag to see if a section can be

.     discarded.  *}

.#define SEC_DEBUGGING 0x2000

.

.  {* The contents of this section are held in memory pointed to

.     by the contents field.  This is checked by bfd_get_section_contents,

.     and the data is retrieved from memory if appropriate.  *}

.#define SEC_IN_MEMORY 0x4000

.

.  {* The contents of this section are to be excluded by the

.     linker for executable and shared objects unless those

.     objects are to be further relocated.  *}

.#define SEC_EXCLUDE 0x8000

.

.  {* The contents of this section are to be sorted based on the sum of

.     the symbol and addend values specified by the associated relocation

.     entries.  Entries without associated relocation entries will be

.     appended to the end of the section in an unspecified order.  *}

.#define SEC_SORT_ENTRIES 0x10000

.

.  {* When linking, duplicate sections of the same name should be

.     discarded, rather than being combined into a single section as

.     is usually done.  This is similar to how common symbols are

.     handled.  See SEC_LINK_DUPLICATES below.  *}

.#define SEC_LINK_ONCE 0x20000

.

.  {* If SEC_LINK_ONCE is set, this bitfield describes how the linker

.     should handle duplicate sections.  *}

.#define SEC_LINK_DUPLICATES 0xc0000

.

.  {* This value for SEC_LINK_DUPLICATES means that duplicate

.     sections with the same name should simply be discarded.  *}

.#define SEC_LINK_DUPLICATES_DISCARD 0x0

.

.  {* This value for SEC_LINK_DUPLICATES means that the linker

.     should warn if there are any duplicate sections, although

.     it should still only link one copy.  *}

.#define SEC_LINK_DUPLICATES_ONE_ONLY 0x40000

.

.  {* This value for SEC_LINK_DUPLICATES means that the linker

.     should warn if any duplicate sections are a different size.  *}

.#define SEC_LINK_DUPLICATES_SAME_SIZE 0x80000

.

.  {* This value for SEC_LINK_DUPLICATES means that the linker

.     should warn if any duplicate sections contain different

.     contents.  *}

.#define SEC_LINK_DUPLICATES_SAME_CONTENTS \

.  (SEC_LINK_DUPLICATES_ONE_ONLY | SEC_LINK_DUPLICATES_SAME_SIZE)

.

.  {* This section was created by the linker as part of dynamic

.     relocation or other arcane processing.  It is skipped when

.     going through the first-pass output, trusting that someone

.     else up the line will take care of it later.  *}

.#define SEC_LINKER_CREATED 0x100000

.

.  {* This section should not be subject to garbage collection.

.     Also set to inform the linker that this section should not be

.     listed in the link map as discarded.  *}

.#define SEC_KEEP 0x200000

.

.  {* This section contains "short" data, and should be placed

.     "near" the GP.  *}

.#define SEC_SMALL_DATA 0x400000

.

.  {* Attempt to merge identical entities in the section.

.     Entity size is given in the entsize field.  *}

.#define SEC_MERGE 0x800000

.

.  {* If given with SEC_MERGE, entities to merge are zero terminated

.     strings where entsize specifies character size instead of fixed

.     size entries.  *}

.#define SEC_STRINGS 0x1000000

.

.  {* This section contains data about section groups.  *}

.#define SEC_GROUP 0x2000000

.

.  {* The section is a COFF shared library section.  This flag is

.     only for the linker.  If this type of section appears in

.     the input file, the linker must copy it to the output file

.     without changing the vma or size.  FIXME: Although this

.     was originally intended to be general, it really is COFF

.     specific (and the flag was renamed to indicate this).  It

.     might be cleaner to have some more general mechanism to

.     allow the back end to control what the linker does with

.     sections.  *}

.#define SEC_COFF_SHARED_LIBRARY 0x4000000

.

.  {* This section contains data which may be shared with other

.     executables or shared objects. This is for COFF only.  *}

.#define SEC_COFF_SHARED 0x8000000

.

.  {* When a section with this flag is being linked, then if the size of

.     the input section is less than a page, it should not cross a page

.     boundary.  If the size of the input section is one page or more,

.     it should be aligned on a page boundary.  This is for TI

.     TMS320C54X only.  *}

.#define SEC_TIC54X_BLOCK 0x10000000

.

.  {* Conditionally link this section; do not link if there are no

.     references found to any symbol in the section.  This is for TI

.     TMS320C54X only.  *}

.#define SEC_TIC54X_CLINK 0x20000000

.

.  {* Indicate that section has the no read flag set. This happens

.     when memory read flag isn't set. *}

.#define SEC_COFF_NOREAD 0x40000000

.

.  {*  End of section flags.  *}

.

.  {* Some internal packed boolean fields.  *}

.

.  {* See the vma field.  *}

.  unsigned int user_set_vma : 1;

.

.  {* A mark flag used by some of the linker backends.  *}

.  unsigned int linker_mark : 1;

.

.  {* Another mark flag used by some of the linker backends.  Set for

.     output sections that have an input section.  *}

.  unsigned int linker_has_input : 1;

.

.  {* Mark flag used by some linker backends for garbage collection.  *}

.  unsigned int gc_mark : 1;

.

.  {* The following flags are used by the ELF linker. *}

.

.  {* Mark sections which have been allocated to segments.  *}

.  unsigned int segment_mark : 1;

.

.  {* Type of sec_info information.  *}

.  unsigned int sec_info_type:3;

.#define ELF_INFO_TYPE_NONE      0

.#define ELF_INFO_TYPE_STABS     1

.#define ELF_INFO_TYPE_MERGE     2

.#define ELF_INFO_TYPE_EH_FRAME  3

.#define ELF_INFO_TYPE_JUST_SYMS 4

.

.  {* Nonzero if this section uses RELA relocations, rather than REL.  *}

.  unsigned int use_rela_p:1;

.

.  {* Bits used by various backends.  The generic code doesn't touch

.     these fields.  *}

.

.  {* Nonzero if this section has TLS related relocations.  *}

.  unsigned int has_tls_reloc:1;

.

.  {* Nonzero if this section has a call to __tls_get_addr.  *}

.  unsigned int has_tls_get_addr_call:1;

.

.  {* Nonzero if this section has a gp reloc.  *}

.  unsigned int has_gp_reloc:1;

.

.  {* Nonzero if this section needs the relax finalize pass.  *}

.  unsigned int need_finalize_relax:1;

.

.  {* Whether relocations have been processed.  *}

.  unsigned int reloc_done : 1;

.

.  {* End of internal packed boolean fields.  *}

.

.  {*  The virtual memory address of the section - where it will be

.      at run time.  The symbols are relocated against this.  The

.      user_set_vma flag is maintained by bfd; if it's not set, the

.      backend can assign addresses (for example, in <<a.out>>, where

.      the default address for <<.data>> is dependent on the specific

.      target and various flags).  *}

.  bfd_vma vma;

.

.  {*  The load address of the section - where it would be in a

.      rom image; really only used for writing section header

.      information.  *}

.  bfd_vma lma;

.

.  {* The size of the section in octets, as it will be output.

.     Contains a value even if the section has no contents (e.g., the

.     size of <<.bss>>).  *}

.  bfd_size_type size;

.

.  {* For input sections, the original size on disk of the section, in

.     octets.  This field should be set for any section whose size is

.     changed by linker relaxation.  It is required for sections where

.     the linker relaxation scheme doesn't cache altered section and

.     reloc contents (stabs, eh_frame, SEC_MERGE, some coff relaxing

.     targets), and thus the original size needs to be kept to read the

.     section multiple times.  For output sections, rawsize holds the

.     section size calculated on a previous linker relaxation pass.  *}

.  bfd_size_type rawsize;

.

.  {* Relaxation table. *}

.  struct relax_table *relax;

.

.  {* Count of used relaxation table entries. *}

.  int relax_count;

.

.

.  {* If this section is going to be output, then this value is the

.     offset in *bytes* into the output section of the first byte in the

.     input section (byte ==> smallest addressable unit on the

.     target).  In most cases, if this was going to start at the

.     100th octet (8-bit quantity) in the output section, this value

.     would be 100.  However, if the target byte size is 16 bits

.     (bfd_octets_per_byte is "2"), this value would be 50.  *}

.  bfd_vma output_offset;

.

.  {* The output section through which to map on output.  *}

.  struct bfd_section *output_section;

.

.  {* The alignment requirement of the section, as an exponent of 2 -

.     e.g., 3 aligns to 2^3 (or 8).  *}

.  unsigned int alignment_power;

.

.  {* If an input section, a pointer to a vector of relocation

.     records for the data in this section.  *}

.  struct reloc_cache_entry *relocation;

.

.  {* If an output section, a pointer to a vector of pointers to

.     relocation records for the data in this section.  *}

.  struct reloc_cache_entry **orelocation;

.

.  {* The number of relocation records in one of the above.  *}

.  unsigned reloc_count;

.

.  {* Information below is back end specific - and not always used

.     or updated.  *}

.

.  {* File position of section data.  *}

.  file_ptr filepos;

.

.  {* File position of relocation info.  *}

.  file_ptr rel_filepos;

.

.  {* File position of line data.  *}

.  file_ptr line_filepos;

.

.  {* Pointer to data for applications.  *}

.  void *userdata;

.

.  {* If the SEC_IN_MEMORY flag is set, this points to the actual

.     contents.  *}

.  unsigned char *contents;

.

.  {* Attached line number information.  *}

.  alent *lineno;

.

.  {* Number of line number records.  *}

.  unsigned int lineno_count;

.

.  {* Entity size for merging purposes.  *}

.  unsigned int entsize;

.

.  {* Points to the kept section if this section is a link-once section,

.     and is discarded.  *}

.  struct bfd_section *kept_section;

.

.  {* When a section is being output, this value changes as more

.     linenumbers are written out.  *}

.  file_ptr moving_line_filepos;

.

.  {* What the section number is in the target world.  *}

.  int target_index;

.

.  void *used_by_bfd;

.

.  {* If this is a constructor section then here is a list of the

.     relocations created to relocate items within it.  *}

.  struct relent_chain *constructor_chain;

.

.  {* The BFD which owns the section.  *}

.  bfd *owner;

.

.  {* A symbol which points at this section only.  *}

.  struct bfd_symbol *symbol;

.  struct bfd_symbol **symbol_ptr_ptr;

.

.  {* Early in the link process, map_head and map_tail are used to build

.     a list of input sections attached to an output section.  Later,

.     output sections use these fields for a list of bfd_link_order

.     structs.  *}

.  union {

.    struct bfd_link_order *link_order;

.    struct bfd_section *s;

.  } map_head, map_tail;

.} asection;

.

.{* Relax table contains information about instructions which can

.   be removed by relaxation -- replacing a long address with a

.   short address.  *}

.struct relax_table {

.  {* Address where bytes may be deleted. *}

.  bfd_vma addr;

.

.  {* Number of bytes to be deleted.  *}

.  int size;

.};

.

.{* These sections are global, and are managed by BFD.  The application

.   and target back end are not permitted to change the values in

.   these sections.  New code should use the section_ptr macros rather

.   than referring directly to the const sections.  The const sections

.   may eventually vanish.  *}

.#define BFD_ABS_SECTION_NAME "*ABS*"

.#define BFD_UND_SECTION_NAME "*UND*"

.#define BFD_COM_SECTION_NAME "*COM*"

.#define BFD_IND_SECTION_NAME "*IND*"

.

.{* The absolute section.  *}

.extern asection bfd_abs_section;

.#define bfd_abs_section_ptr ((asection *) &bfd_abs_section)

.#define bfd_is_abs_section(sec) ((sec) == bfd_abs_section_ptr)

.{* Pointer to the undefined section.  *}

.extern asection bfd_und_section;

.#define bfd_und_section_ptr ((asection *) &bfd_und_section)

.#define bfd_is_und_section(sec) ((sec) == bfd_und_section_ptr)

.{* Pointer to the common section.  *}

.extern asection bfd_com_section;

.#define bfd_com_section_ptr ((asection *) &bfd_com_section)

.{* Pointer to the indirect section.  *}

.extern asection bfd_ind_section;

.#define bfd_ind_section_ptr ((asection *) &bfd_ind_section)

.#define bfd_is_ind_section(sec) ((sec) == bfd_ind_section_ptr)

.

.#define bfd_is_const_section(SEC)              \

. (   ((SEC) == bfd_abs_section_ptr)            \

.  || ((SEC) == bfd_und_section_ptr)            \

.  || ((SEC) == bfd_com_section_ptr)            \

.  || ((SEC) == bfd_ind_section_ptr))

.

.{* Macros to handle insertion and deletion of a bfd's sections.  These

.   only handle the list pointers, ie. do not adjust section_count,

.   target_index etc.  *}

.#define bfd_section_list_remove(ABFD, S) \

.  do                                                   \

.    {                                                  \

.      asection *_s = S;                                \

.      asection *_next = _s->next;                      \

.      asection *_prev = _s->prev;                      \

.      if (_prev)                                       \

.        _prev->next = _next;                           \

.      else                                             \

.        (ABFD)->sections = _next;                      \

.      if (_next)                                       \

.        _next->prev = _prev;                           \

.      else                                             \

.        (ABFD)->section_last = _prev;                  \

.    }                                                  \

.  while (0)

.#define bfd_section_list_append(ABFD, S) \

.  do                                                   \

.    {                                                  \

.      asection *_s = S;                                \

.      bfd *_abfd = ABFD;                               \

.      _s->next = NULL;                                 \

.      if (_abfd->section_last)                         \

.        {                                              \

.          _s->prev = _abfd->section_last;              \

.          _abfd->section_last->next = _s;              \

.        }                                              \

.      else                                             \

.        {                                              \

.          _s->prev = NULL;                             \

.          _abfd->sections = _s;                        \

.        }                                              \

.      _abfd->section_last = _s;                        \

.    }                                                  \

.  while (0)

.#define bfd_section_list_prepend(ABFD, S) \

.  do                                                   \

.    {                                                  \

.      asection *_s = S;                                \

.      bfd *_abfd = ABFD;                               \

.      _s->prev = NULL;                                 \

.      if (_abfd->sections)                             \

.        {                                              \

.          _s->next = _abfd->sections;                  \

.          _abfd->sections->prev = _s;                  \

.        }                                              \

.      else                                             \

.        {                                              \

.          _s->next = NULL;                             \

.          _abfd->section_last = _s;                    \

.        }                                              \

.      _abfd->sections = _s;                            \

.    }                                                  \

.  while (0)

.#define bfd_section_list_insert_after(ABFD, A, S) \

.  do                                                   \

.    {                                                  \

.      asection *_a = A;                                \

.      asection *_s = S;                                \

.      asection *_next = _a->next;                      \

.      _s->next = _next;                                \

.      _s->prev = _a;                                   \

.      _a->next = _s;                                   \

.      if (_next)                                       \

.        _next->prev = _s;                              \

.      else                                             \

.        (ABFD)->section_last = _s;                     \

.    }                                                  \

.  while (0)

.#define bfd_section_list_insert_before(ABFD, B, S) \

.  do                                                   \

.    {                                                  \

.      asection *_b = B;                                \

.      asection *_s = S;                                \

.      asection *_prev = _b->prev;                      \

.      _s->prev = _prev;                                \

.      _s->next = _b;                                   \

.      _b->prev = _s;                                   \

.      if (_prev)                                       \

.        _prev->next = _s;                              \

.      else                                             \

.        (ABFD)->sections = _s;                         \

.    }                                                  \

.  while (0)

.#define bfd_section_removed_from_list(ABFD, S) \

.  ((S)->next == NULL ? (ABFD)->section_last != (S) : (S)->next->prev != (S))

.

.#define BFD_FAKE_SECTION(SEC, FLAGS, SYM, NAME, IDX)                   \

.  {* name, id,  index, next, prev, flags, user_set_vma,            *}  \

.  { NAME,  IDX, 0,     NULL, NULL, FLAGS, 0,                           \

.                                                                       \

.  {* linker_mark, linker_has_input, gc_mark,                       *}  \

.     0,           0,                1,                                 \

.                                                                       \

.  {* segment_mark, sec_info_type, use_rela_p, has_tls_reloc,       *}  \

.     0,            0,             0,          0,                       \

.                                                                       \

.  {* has_tls_get_addr_call, has_gp_reloc, need_finalize_relax,     *}  \

.     0,                     0,            0,                           \

.                                                                       \

.  {* reloc_done, vma, lma, size, rawsize, relax, relax_count,      *}  \

.     0,          0,   0,   0,    0,       0,     0,                    \

.                                                                       \

.  {* output_offset, output_section,              alignment_power,  *}  \

.     0,             (struct bfd_section *) &SEC, 0,                    \

.                                                                       \

.  {* relocation, orelocation, reloc_count, filepos, rel_filepos,   *}  \

.     NULL,       NULL,        0,           0,       0,                 \

.                                                                       \

.  {* line_filepos, userdata, contents, lineno, lineno_count,       *}  \

.     0,            NULL,     NULL,     NULL,   0,                      \

.                                                                       \

.  {* entsize, kept_section, moving_line_filepos,                    *} \

.     0,       NULL,          0,                                        \

.                                                                       \

.  {* target_index, used_by_bfd, constructor_chain, owner,          *}  \

.     0,            NULL,        NULL,              NULL,               \

.                                                                       \

.  {* symbol,                    symbol_ptr_ptr,                    *}  \

.     (struct bfd_symbol *) SYM, &SEC.symbol,                           \

.                                                                       \

.  {* map_head, map_tail                                            *}  \

.     { NULL }, { NULL }                                                \

.    }

.

*/

/* We use a macro to initialize the static asymbol structures because

   traditional C does not permit us to initialize a union member while

   gcc warns if we don't initialize it.  */

 /* the_bfd, name, value, attr, section [, udata] */

#ifdef __STDC__

#define GLOBAL_SYM_INIT(NAME, SECTION) \

  { 0, NAME, 0, BSF_SECTION_SYM, (asection *) SECTION, { 0 }}

#else

#define GLOBAL_SYM_INIT(NAME, SECTION) \

  { 0, NAME, 0, BSF_SECTION_SYM, (asection *) SECTION }

#endif

/* These symbols are global, not specific to any BFD.  Therefore, anything

   that tries to change them is broken, and should be repaired.  */

static const asymbol global_syms[] =

{

  GLOBAL_SYM_INIT (BFD_COM_SECTION_NAME, &bfd_com_section),

  GLOBAL_SYM_INIT (BFD_UND_SECTION_NAME, &bfd_und_section),

  GLOBAL_SYM_INIT (BFD_ABS_SECTION_NAME, &bfd_abs_section),

  GLOBAL_SYM_INIT (BFD_IND_SECTION_NAME, &bfd_ind_section)

};

#define STD_SECTION(SEC, FLAGS, NAME, IDX)                              \

  asection SEC = BFD_FAKE_SECTION(SEC, FLAGS, &global_syms[IDX],        \

                                  NAME, IDX)

STD_SECTION (bfd_com_section, SEC_IS_COMMON, BFD_COM_SECTION_NAME, 0);

STD_SECTION (bfd_und_section, 0, BFD_UND_SECTION_NAME, 1);

STD_SECTION (bfd_abs_section, 0, BFD_ABS_SECTION_NAME, 2);

STD_SECTION (bfd_ind_section, 0, BFD_IND_SECTION_NAME, 3);

#undef STD_SECTION

/* Initialize an entry in the section hash table.  */

struct bfd_hash_entry *

bfd_section_hash_newfunc (struct bfd_hash_entry *entry,

                          struct bfd_hash_table *table,

                          const char *string)

{

  /* Allocate the structure if it has not already been allocated by a

     subclass.  */

  if (entry == NULL)

    {

      entry = (struct bfd_hash_entry *)

        bfd_hash_allocate (table, sizeof (struct section_hash_entry));

      if (entry == NULL)

        return entry;

    }

  /* Call the allocation method of the superclass.  */

  entry = bfd_hash_newfunc (entry, table, string);

  if (entry != NULL)

    memset (&((struct section_hash_entry *) entry)->section, 0,

            sizeof (asection));

  return entry;

}

#define section_hash_lookup(table, string, create, copy) \

  ((struct section_hash_entry *) \

   bfd_hash_lookup ((table), (string), (create), (copy)))

/* Create a symbol whose only job is to point to this section.  This

   is useful for things like relocs which are relative to the base

   of a section.  */

bfd_boolean

_bfd_generic_new_section_hook (bfd *abfd, asection *newsect)

{

  newsect->symbol = bfd_make_empty_symbol (abfd);

  if (newsect->symbol == NULL)

    return FALSE;

  newsect->symbol->name = newsect->name;

  newsect->symbol->value = 0;

  newsect->symbol->section = newsect;

  newsect->symbol->flags = BSF_SECTION_SYM;

  newsect->symbol_ptr_ptr = &newsect->symbol;

  return TRUE;

}

/* Initializes a new section.  NEWSECT->NAME is already set.  */

static asection *

bfd_section_init (bfd *abfd, asection *newsect)

{

  static int section_id = 0x10;  /* id 0 to 3 used by STD_SECTION.  */

  newsect->id = section_id;

  newsect->index = abfd->section_count;

  newsect->owner = abfd;

  if (! BFD_SEND (abfd, _new_section_hook, (abfd, newsect)))

    return NULL;

  section_id++;

  abfd->section_count++;

  bfd_section_list_append (abfd, newsect);

  return newsect;

}

/*

DOCDD

INODE

section prototypes,  , typedef asection, Sections

SUBSECTION

        Section prototypes

These are the functions exported by the section handling part of BFD.

*/

/*

FUNCTION

        bfd_section_list_clear

SYNOPSIS

        void bfd_section_list_clear (bfd *);

DESCRIPTION

        Clears the section list, and also resets the section count and

        hash table entries.

*/

void

bfd_section_list_clear (bfd *abfd)

{

  abfd->sections = NULL;

  abfd->section_last = NULL;

  abfd->section_count = 0;

  memset (abfd->section_htab.table, 0,

          abfd->section_htab.size * sizeof (struct bfd_hash_entry *));

}

/*

FUNCTION

        bfd_get_section_by_name

SYNOPSIS

        asection *bfd_get_section_by_name (bfd *abfd, const char *name);

DESCRIPTION

        Run through @var{abfd} and return the one of the

        <<asection>>s whose name matches @var{name}, otherwise <<NULL>>.

        @xref{Sections}, for more information.

        This should only be used in special cases; the normal way to process

        all sections of a given name is to use <<bfd_map_over_sections>> and

        <<strcmp>> on the name (or better yet, base it on the section flags

        or something else) for each section.

*/

asection *

bfd_get_section_by_name (bfd *abfd, const char *name)

{

  struct section_hash_entry *sh;

  sh = section_hash_lookup (&abfd->section_htab, name, FALSE, FALSE);

  if (sh != NULL)

    return &sh->section;

  return NULL;

}

/*

FUNCTION

        bfd_get_section_by_name_if

SYNOPSIS

        asection *bfd_get_section_by_name_if

          (bfd *abfd,

           const char *name,

           bfd_boolean (*func) (bfd *abfd, asection *sect, void *obj),

           void *obj);

DESCRIPTION

        Call the provided function @var{func} for each section

        attached to the BFD @var{abfd} whose name matches @var{name},

        passing @var{obj} as an argument. The function will be called

        as if by

|       func (abfd, the_section, obj);