OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-6.8/] [gdb/] [testsuite/] [gdb.base/] [a2-run.exp] - Blame information for rev 816

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 24 jeremybenn 
#   Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1999, 2000,
2 
#   2007, 2008 Free Software Foundation, Inc.
3 
 
4 
# This program is free software; you can redistribute it and/or modify
5 
# it under the terms of the GNU General Public License as published by
6 
# the Free Software Foundation; either version 3 of the License, or
7 
# (at your option) any later version.
8 
#
9 
# This program is distributed in the hope that it will be useful,
10 
# but WITHOUT ANY WARRANTY; without even the implied warranty of
11 
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12 
# GNU General Public License for more details.
13 
#
14 
# You should have received a copy of the GNU General Public License
15 
# along with this program.  If not, see .
16 
 
17 
# Please email any bugs, comments, and/or additions to this file to:
18 
# bug-gdb@prep.ai.mit.edu
19 
 
20 
# This file was written by Rob Savoye. (rob@cygnus.com)
21 
 
22 
# Can't do this test without stdio support.
23 
if [gdb_skip_stdio_test "a2run.exp"] {
24 
    return
25 
}
26 
 
27 
if $tracelevel then {
28 
    strace $tracelevel
29 
}
30 
 
31 
#
32 
# test running programs
33 
#
34 
set prms_id 0
35 
set bug_id 0
36 
 
37 
set testfile "run"
38 
set srcfile ${testfile}.c
39 
set binfile ${objdir}/${subdir}/${testfile}
40 
if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
41 
    untested a2-run.exp
42 
    return -1
43 
}
44 
 
45 
gdb_exit
46 
gdb_start
47 
gdb_reinitialize_dir $srcdir/$subdir
48 
gdb_load ${binfile}
49 
 
50 
# Run with no arguments.
51 
# On VxWorks this justs make sure the program was run.
52 
gdb_run_cmd
53 
 
54 
if [istarget "*-*-vxworks*"] then {
55 
    set timeout 120
56 
    verbose "Timeout is now $timeout seconds" 2
57 
    gdb_expect {
58 
         "Program exited normally" {
59 
            unresolved "run \"$testfile\" with no args"
60 
        }
61 
         -re "usage:  factorial " {
62 
            pass "run \"$testfile\" with no args"
63 
        }
64 
        timeout {
65 
            fail "(timeout) run \"$testfile\" with no args"
66 
        }
67 
    }
68 
    set timeout 10
69 
    verbose "Timeout is now $timeout seconds" 2
70 
    gdb_expect -re "$gdb_prompt $" {}
71 
} else {
72 
    gdb_expect {
73 
        -re ".*usage:  factorial .*Program exited with code 01\.\r\n$gdb_prompt $" {
74 
            pass "run \"$testfile\" with no args"
75 
            pass "no spurious messages at program exit"
76 
        }
77 
        -re ".*usage:  factorial .*Program exited with code 01.*$gdb_prompt $" {
78 
            pass "run \"$testfile\" with no args"
79 
            fail "no spurious messages at program exit"
80 
        }
81 
        -re ".*usage:  factorial .* EXIT code 1.*Program exited normally\.\r\n$gdb_prompt $" {
82 
            pass "run \"$testfile\" with no args (exit wrapper)"
83 
            pass "no spurious messages at program exit"
84 
        }
85 
        -re ".*usage:  factorial .* EXIT code 1.*Program exited normally.*$gdb_prompt $" {
86 
            pass "run \"$testfile\" with no args (exit wrapper)"
87 
            fail "no spurious messages at program exit"
88 
        }
89 
        -re ".*$gdb_prompt $" {
90 
            fail "run \"$testfile\" with no args"
91 
            verbose "expect_out is $expect_out(buffer)" 2
92 
        }
93 
        timeout {
94 
            fail "(timeout) run \"$testfile\" no args"
95 
        }
96 
    }
97 
}
98 
 
99 
# The remaining tests don't work for targets can't take arguments...
100 
 
101 
if [target_info exists noargs] then {
102 
    verbose "Skipping rest of a2-run.exp because of noargs."
103 
    return
104 
}
105 
 
106 
# Now run with some arguments
107 
if [istarget "*-*-vxworks*"] then {
108 
    send_gdb "run vxmain \"5\"\n"
109 
    gdb_expect -re "run vxmain \"5\"\r\n" {}
110 
    set timeout 120
111 
    verbose "Timeout is now $timeout seconds" 2
112 
    gdb_expect {
113 
         "Program exited normally" {
114 
            unresolved "run \"$testfile\" with arg"
115 
        }
116 
         "120" {
117 
            pass "run \"$testfile\" with arg"
118 
        }
119 
        timeout {
120 
            fail "(timeout) run \"$testfile\" with arg"
121 
        }
122 
    }
123 
    set timeout 10
124 
    verbose "Timeout is now $timeout seconds" 2
125 
    gdb_expect -re "$gdb_prompt $" {}
126 
} else {
127 
        setup_xfail "mips-idt-*" "arm-*-coff strongarm-*-coff"
128 
        gdb_run_cmd 5
129 
        gdb_expect {
130 
            -re ".*120.*$gdb_prompt $"\
131 
                                { pass "run \"$testfile\" with arg" }
132 
            -re ".*$gdb_prompt $"       { fail "run \"$testfile\" with arg" }
133 
            timeout             { fail "(timeout) run \"$testfile\" with arg" }
134 
        }
135 
}
136 
 
137 
# Run again with same arguments.
138 
setup_xfail "mips-idt-*"
139 
gdb_run_cmd
140 
 
141 
if [istarget "*-*-vxworks*"] then {
142 
    set timeout 120
143 
    verbose "Timeout is now $timeout seconds" 2
144 
    gdb_expect {
145 
         "Program exited normally" {
146 
            unresolved "run \"$testfile\" again with same args"
147 
        }
148 
         "120" { pass "run \"$testfile\" again with same args" }
149 
        timeout { fail "(timeout) run \"$testfile\" again with same args" }
150 
    }
151 
    set timeout 10
152 
    verbose "Timeout is now $timeout seconds" 2
153 
    gdb_expect -re "$gdb_prompt $" {}
154 
} else {
155 
    setup_xfail "arm-*-coff strongarm-*-coff"
156 
    gdb_expect {
157 
            -re ".*120.*$gdb_prompt $"\
158 
                                { pass "run \"$testfile\" again with same args" }
159 
            -re ".*$gdb_prompt $"       { fail "run \"$testfile\" again with same args" }
160 
            timeout             { fail "(timeout) run \"$testfile\" again with same args" }
161 
        }
162 
}
163 
 
164 
# Use "set args" command to specify no arguments as default and run again.
165 
if [istarget "*-*-vxworks*"] then {
166 
    send_gdb "set args main\n"
167 
} else {
168 
    send_gdb "set args\n"
169 
}
170 
gdb_expect -re "$gdb_prompt $"
171 
 
172 
gdb_run_cmd
173 
 
174 
if [istarget "*-*-vxworks*"] then {
175 
    set timeout 120
176 
    verbose "Timeout is now $timeout seconds" 2
177 
    gdb_expect {
178 
         "Program exited normally" {
179 
            unresolved "run after setting args to nil"
180 
        }
181 
         "usage:  factorial " {
182 
            pass "run after setting args to nil"
183 
        }
184 
        timeout {
185 
            fail "(timeout) run after setting args to nil"
186 
        }
187 
    }
188 
    set timeout 10
189 
    verbose "Timeout is now $timeout seconds" 2
190 
    gdb_expect -re "$gdb_prompt $" {}
191 
} else {
192 
    gdb_expect {
193 
        -re ".*usage:  factorial .*$gdb_prompt $" {
194 
            pass "run after setting args to nil"
195 
        }
196 
        -re ".*$gdb_prompt $" {
197 
            fail "run after setting args to nil"
198 
        }
199 
        timeout {
200 
            fail "(timeout) run after setting args to nil"
201 
        }
202 
    }
203 
}
204 
 
205 
# Use "set args" command to specify an argument and run again.
206 
setup_xfail "mips-idt-*"
207 
if [istarget "*-*-vxworks*"] then {
208 
   send_gdb "set args vxmain \"6\"\n"
209 
} else {
210 
        send_gdb "set args 6\n"
211 
}
212 
gdb_expect -re "$gdb_prompt $"
213 
gdb_run_cmd
214 
 
215 
if [istarget "*-*-vxworks*"] then {
216 
    set timeout 120
217 
    verbose "Timeout is now $timeout seconds" 2
218 
    gdb_expect {
219 
         "Program exited normally" {
220 
            unresolved "run \"$testfile\" again after setting args"
221 
        }
222 
         "720" {
223 
            pass "run \"$testfile\" again after setting args"
224 
        }
225 
        timeout {
226 
            fail "(timeout) run \"$testfile\" again after setting args"
227 
        }
228 
    }
229 
    set timeout 10
230 
    verbose "Timeout is now $timeout seconds" 2
231 
    gdb_expect -re "$gdb_prompt $" {}
232 
} else {
233 
    setup_xfail "arm-*-coff strongarm-*-coff"
234 
    gdb_expect {
235 
            -re ".*720.*$gdb_prompt $" {
236 
                pass "run \"$testfile\" again after setting args"
237 
            }
238 
            -re ".*$gdb_prompt $" {
239 
                fail "run \"$testfile\" again after setting args"
240 
            }
241 
            timeout {
242 
                fail "(timeout) run \"$testfile\" again after setting args"
243 
            }
244 
        }
245 
}
246 
 
247 
# GOAL: Test that shell is being used with "run".  For remote debugging
248 
# targets, there is no guarantee that a "shell" (whatever that is) is used.
249 
if ![is_remote target] then {
250 
    send_gdb "run `echo 8`\n"
251 
    gdb_expect {
252 
        -re "Starting program.*40320.*$gdb_prompt $" {
253 
            pass "run \"$testfile\" with shell"
254 
        }
255 
        -re ".*$gdb_prompt $" {
256 
            fail "run \"$testfile\" with shell"
257 
        }
258 
        timeout {
259 
            fail "(timeout) run \"$testfile\" with shell"
260 
        }
261 
    }
262 
}
263 
 
264 
# Reset the default arguments for VxWorks
265 
if [istarget "*-*-vxworks*"] then {
266 
    send_gdb "set args main\n"
267 
    gdb_expect -re ".*$gdb_prompt $" {}
268 
}

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.