Subversion Repositories openrisc

#   Copyright 1997, 1999, 2007, 2008 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 3 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program.  If not, see .

if { [is_remote target] || ![isnative] } then {

    continue

}

set prms_id 0

set bug_id 0

# NOTE drow/2002-12-06: I don't know what the referenced kernel problem

# is, but it appears to be fixed in recent HP/UX versions.

##if [istarget "hppa2.0w-hp-hpux*"] {

##  warning "Don't run gdb.base/foll-vfork.exp until JAGaa43495 kernel problem is fixed."

##  return 0

##}

global srcfile

set testfile "foll-vfork"

set testfile2 "vforked-prog"

set srcfile ${testfile}.c

set srcfile2 ${testfile2}.c

set binfile ${objdir}/${subdir}/${testfile}

set binfile2 ${objdir}/${subdir}/${testfile2}

if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {

     untested foll-vfork.exp

     return -1

}

if  { [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" executable {debug}] != "" } {

     untested foll-vfork.exp

     return -1

}

# Until "set follow-fork-mode" and "catch vfork" are implemented on

# other targets...

#

if {![istarget "hppa*-hp-hpux*"] && ![istarget "*-linux*"]} then {

    continue

}

# Test to see if we are on an HP-UX 10.20 and if so,

# do not run these tests as catching vfork is disabled for

# 10.20.

if [istarget "hppa*-hp-hpux10.20"] then {

    return 0

}

# A few of these tests require a little more time than the standard

# timeout allows.

set oldtimeout $timeout

set timeout [expr "$timeout + 10"]

proc check_vfork_catchpoints {} {

  global gdb_prompt

  global has_vfork_catchpoints

  # Verify that the system supports "catch vfork".

  gdb_test "catch vfork" "Catchpoint \[0-9\]* \\(vfork\\)" "insert first vfork catchpoint"

  set has_vfork_catchpoints 0

  gdb_test_multiple "continue" "continue to first vfork catchpoint" {

    -re ".*Your system does not support vfork catchpoints.*$gdb_prompt $" {

      unsupported "continue to first vfork catchpoint"

    }

    -re ".*Catchpoint.*$gdb_prompt $" {

      set has_vfork_catchpoints 1

      pass "continue to first vfork catchpoint"

    }

  }

  if {$has_vfork_catchpoints == 0} {

    unsupported "vfork catchpoints"

    return -code return

  }

}

proc vfork_parent_follow_through_step {} {

   global gdb_prompt

   send_gdb "set follow parent\n"

   gdb_expect {

      -re "$gdb_prompt $" {pass "set follow parent, vfork through step"}

      timeout         {fail "set follow parent, vfork through step"}

   }

   send_gdb "next\n"

   gdb_expect {

      -re "Detaching after fork from.*13.*$gdb_prompt "\

                      {pass "vfork parent follow, through step"}

      -re "$gdb_prompt $" {fail "vfork parent follow, through step"}

      timeout         {fail "(timeout) vfork parent follow, through step" }

   }

   # The child has been detached; allow time for any output it might

   # generate to arrive, so that output doesn't get confused with

   # any gdb_expected debugger output from a subsequent testpoint.

   #

   exec sleep 1

}

proc vfork_parent_follow_to_bp {} {

   global gdb_prompt

   global srcfile

   send_gdb "set follow parent\n"

   gdb_expect {

      -re "$gdb_prompt $" {pass "set follow parent, vfork to bp"}

      timeout         {fail "set follow parent, vfork to bp"}

   }

   send_gdb "break ${srcfile}:18\n"

   gdb_expect {

      -re "$gdb_prompt $" {pass "break, vfork to bp"}

      timeout         {fail "break, vfork to bp"}

   }

   send_gdb "continue\n"

   gdb_expect {

      -re ".*Detaching after fork from child process.*Breakpoint.*18.*$gdb_prompt "\

                      {pass "vfork parent follow, to bp"}

      -re "$gdb_prompt $" {fail "vfork parent follow, to bp"}

      timeout         {fail "(timeout) vfork parent follow, to bp" }

   }

   # The child has been detached; allow time for any output it might

   # generate to arrive, so that output doesn't get confused with

   # any expected debugger output from a subsequent testpoint.

   #

   exec sleep 1

}

proc vfork_and_exec_child_follow_to_main_bp {} {

   global gdb_prompt

   global binfile

   send_gdb "set follow child\n"

   gdb_expect {

      -re "$gdb_prompt $" {pass "set follow child, vfork and exec to main bp"}

      timeout         {fail "set follow child, vfork and exec to main bp"}

   }

   send_gdb "continue\n"

   gdb_expect {

      -re "Attaching after fork to.*Executing new program.*Breakpoint.*vforked-prog.c:9.*$gdb_prompt "\

                      {pass "vfork and exec child follow, to main bp"}

      -re "$gdb_prompt $" {fail "vfork and exec child follow, to main bp"}

      timeout         {fail "(timeout) vfork and exec child follow, to main bp" }

   }

   # The parent has been detached; allow time for any output it might

   # generate to arrive, so that output doesn't get confused with

   # any gdb_expected debugger output from a subsequent testpoint.

   #

   exec sleep 1

   # Explicitly kill this child, or a subsequent rerun actually runs

   # the exec'd child, not the original program...

   send_gdb "kill\n"

   gdb_expect {

      -re ".*Kill the program being debugged.*y or n. $" {

         send_gdb "y\n"

         send_gdb "file $binfile\n"

         gdb_expect {

            -re ".*Load new symbol table from.*y or n. $" {

               send_gdb "y\n"

               gdb_expect {

                  -re "Reading symbols from.*$gdb_prompt $" {}

                  timeout { fail "loading symbols (timeout)"; return }

               }

            }

            -re ".*gdb_prompt $" {}

            timeout { fail "loading symbols (timeout)"; return }

          }

      }

      -re ".*$gdb_prompt $" {}

      timeout { fail "killing inferior (timeout)" ; return }

    }

}

proc vfork_and_exec_child_follow_through_step {} {

   global gdb_prompt

   global binfile

# This test cannot be performed prior to HP-UX 10.30, because ptrace-based

# debugging of a vforking program basically doesn't allow the child to do

# things like hit a breakpoint between a vfork and exec.  This means that

# saying "set follow child; next" at a vfork() call won't work, because

# the implementation of "next" sets a "step resume" breakpoint at the

# return from the vfork(), which the child will hit on its way to exec'ing.

#

   if { ![istarget "hppa*-*-hpux11.*"] } {

      verbose "vfork child-following next test ignored for non-hppa or pre-HP/UX-10.30 targets."

      return 0

   }

   send_gdb "set follow child\n"

   gdb_expect {

      -re "$gdb_prompt $" {pass "set follow child, vfork and exec through step"}

      timeout         {fail "set follow child, vfork and exec through step"}

   }

   send_gdb "next\n"

   gdb_expect {

      -re "Attaching after fork to.*Executing new program.*Breakpoint.*vforked-prog.c:9.*$gdb_prompt "\

                      {pass "vfork and exec child follow, through step"}

      -re "$gdb_prompt $" {fail "vfork and exec child follow, through step"}

      timeout         {fail "(timeout) vfork and exec child follow, through step" }

   }

   # The parent has been detached; allow time for any output it might

   # generate to arrive, so that output doesn't get confused with

   # any expected debugger output from a subsequent testpoint.

   #

   exec sleep 1

   # Explicitly kill this child, or a subsequent rerun actually runs

   # the exec'd child, not the original program...

   send_gdb "kill\n"

   gdb_expect {

      -re ".*Kill the program being debugged.*y or n. $" {

         send_gdb "y\n"

         send_gdb "file $binfile\n"

         gdb_expect {

            -re ".*Load new symbol table from.*y or n. $" {

               send_gdb "y\n"

               gdb_expect {

                  -re "Reading symbols from.*$gdb_prompt $" {}

                  timeout { fail "loading symbols (timeout)"; return }

               }

            }

            -re ".*gdb_prompt $" {}

            timeout { fail "loading symbols (timeout)"; return }

          }

      }

      -re ".*$gdb_prompt $" {}

      timeout { fail "killing inferior (timeout)" ; return }

    }

}

proc tcatch_vfork_then_parent_follow {} {

   global gdb_prompt

   global srcfile

   send_gdb "set follow parent\n"

   gdb_expect {

      -re "$gdb_prompt $" {pass "set follow parent, tcatch vfork"}

      timeout         {fail "set follow parent, tcatch vfork"}

   }

   send_gdb "tcatch vfork\n"

   gdb_expect {

      -re "Catchpoint .*(vfork).*$gdb_prompt $"\

                      {pass "vfork parent follow, set tcatch vfork"}

      -re "$gdb_prompt $" {fail "vfork parent follow, set tcatch vfork"}

      timeout         {fail "(timeout) vfork parent follow, set tcatch vfork"}

   }

   send_gdb "continue\n"

# HP-UX 10.20 seems to stop you in "vfork", while more recent HP-UXs

# stop you in "_vfork".

   gdb_expect {

      -re "0x\[0-9a-fA-F\]*.*vfork.*$gdb_prompt "\

                      {pass "vfork parent follow, tcatch vfork"}

      -re "vfork \\(\\) at.*$gdb_prompt "\

                      {pass "vfork parent follow, tcatch vfork"}

      -re "$gdb_prompt $" {fail "vfork parent follow, tcatch vfork"}

      timeout         {fail "(timeout) vfork parent follow, tcatch vfork"}

   }

   send_gdb "finish\n"

   gdb_expect {

      -re "Run till exit from.*vfork.*0x\[0-9a-fA-F\]* in main .* at .*${srcfile}:12.*$gdb_prompt "\

                      {pass "vfork parent follow, finish after tcatch vfork"}

      -re "$gdb_prompt $" {fail "vfork parent follow, finish after tcatch vfork"}

      timeout         {fail "(timeout) vfork parent follow, finish after tcatch vfork" }

   }

   # The child has been detached; allow time for any output it might

   # generate to arrive, so that output doesn't get confused with

   # any expected debugger output from a subsequent testpoint.

   #

   exec sleep 1

}

proc tcatch_vfork_then_child_follow {} {

   global gdb_prompt

   global srcfile

   global srcfile2

   send_gdb "set follow child\n"

   gdb_expect {

      -re "$gdb_prompt $" {pass "set follow child, tcatch vfork"}

      timeout         {fail "set follow child, tcatch vfork"}

   }

   send_gdb "tcatch vfork\n"

   gdb_expect {

      -re "Catchpoint .*(vfork).*$gdb_prompt $"\

                      {pass "vfork child follow, set tcatch vfork"}

      -re "$gdb_prompt $" {fail "vfork child follow, set tcatch vfork"}

      timeout         {fail "(timeout) vfork child follow, set tcatch vfork"}

   }

   send_gdb "continue\n"

# HP-UX 10.20 seems to stop you in "vfork", while more recent HP-UXs

# stop you in "_vfork".

   gdb_expect {

      -re "vfork \\(\\) at .*$gdb_prompt $"\

                      {pass "vfork child follow, tcatch vfork"}

      -re "0x\[0-9a-fA-F\]*.*vfork.*$gdb_prompt "\

                      {pass "vfork child follow, tcatch vfork"}

      -re "0x\[0-9a-fA-F\]*.*_vfork.*$gdb_prompt "\

                      {pass "vfork child follow, tcatch vfork"}

      -re "$gdb_prompt $" {fail "vfork child follow, tcatch vfork"}

      timeout         {fail "(timeout) vfork child follow, tcatch vfork"}

   }

   send_gdb "finish\n"

   gdb_expect {

      -re "Run till exit from.*vfork.*${srcfile}:12.*$gdb_prompt "\

                      {pass "vfork child follow, finish after tcatch vfork"}

      -re "Run till exit from.*vfork.*${srcfile2}:9.*$gdb_prompt "\

                      {pass "vfork child follow, finish after tcatch vfork (followed exec)"}

      -re "$gdb_prompt $" {fail "vfork child follow, finish after tcatch vfork"}

      timeout         {fail "(timeout) vfork child follow, finish after tcatch vfork" }

   }

   # The parent has been detached; allow time for any output it might

   # generate to arrive, so that output doesn't get confused with

   # any expected debugger output from a subsequent testpoint.

   #

   exec sleep 1

}

proc do_vfork_and_exec_tests {} {

   global gdb_prompt

   # Check that vfork catchpoints are supported, as an indicator for whether

   # vfork-following is supported.

   if [runto_main] then { check_vfork_catchpoints }

   # Try following the parent process by stepping through a call to

   # vfork.  Do this without catchpoints.

   if [runto_main] then { vfork_parent_follow_through_step }

   # Try following the parent process by setting a breakpoint on the

   # other side of a vfork, and running to that point.  Do this

   # without catchpoints.

   if [runto_main] then { vfork_parent_follow_to_bp }

   # Try following the child process by just continuing through the

   # vfork, and letting the parent's breakpoint on "main" be auto-

   # magically reset in the child.

   #

   if [runto_main] then { vfork_and_exec_child_follow_to_main_bp }

   # Try following the child process by stepping through a call to

   # vfork.  The child also executes an exec.  Since the child cannot

   # be debugged until after it has exec'd, and since there's a bp on

   # "main" in the parent, and since the bp's for the parent are

   # recomputed in the exec'd child, the step through a vfork should

   # land us in the "main" for the exec'd child, too.

   #

   if [runto_main] then { vfork_and_exec_child_follow_through_step }

   # Try catching a vfork, and stepping out to the parent.

   #

   if [runto_main] then { tcatch_vfork_then_parent_follow }

   # Try catching a vfork, and stepping out to the child.

   #

   if [runto_main] then { tcatch_vfork_then_child_follow }

   # Test the ability to follow both child and parent of a vfork.  Do

   # this without catchpoints.

   # ??rehrauer: NYI.  Will add testpoints here when implemented.

   #

   # Test the ability to have the debugger ask the user at vfork-time

   # whether to follow the parent, child or both.  Do this without

   # catchpoints.

   # ??rehrauer: NYI.  Will add testpoints here when implemented.

   #

}

# Start with a fresh gdb

gdb_exit

gdb_start

gdb_reinitialize_dir $srcdir/$subdir

gdb_load ${binfile}

# The "Detaching..." and "Attaching..." messages may be hidden by

# default.

gdb_test "set verbose" ""

# This is a test of gdb's ability to follow the parent or child

# of a Unix vfork() system call.  (The child will subsequently

# call a variant of a Unix exec() system call.)

#

do_vfork_and_exec_tests

set timeout $oldtimeout

return 0