Subversion Repositories openrisc

# Tests of overloaded operators resolution.

# Copyright 1998, 1999, 2002, 2004, 2005, 2006, 2007, 2008

# Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 3 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program.  If not, see .

# written by Elena Zannoni (ezannoni@cygnus.com)

#

# source file "userdef.cc"

#

if $tracelevel then {

        strace $tracelevel

}

if { [skip_cplus_tests] } { continue }

# On SPU this test fails because the executable exceeds local storage size.

if { [istarget "spu*-*-*"] } {

        return 0

}

set testfile "userdef"

set srcfile ${testfile}.cc

set binfile ${objdir}/${subdir}/${testfile}

if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {

     untested userdef.exp

     return -1

}

gdb_exit

gdb_start

gdb_reinitialize_dir $srcdir/$subdir

gdb_load ${binfile}

if ![runto_main] then {

    perror "couldn't run to breakpoint"

    continue

}

send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"

    send_gdb "cont\n"

    gdb_expect {

        -re "Break.* marker1(\\(\\)|) \\(\\) at .*:$decimal.*$gdb_prompt $" {

            send_gdb "up\n"

            gdb_expect {

                -re ".*$gdb_prompt $" { pass "up from marker1" }

                timeout { fail "up from marker1" }

            }

        }

        -re "$gdb_prompt $" { fail "continue to marker1"  }

        timeout { fail "(timeout) continue to marker1"  }

    }

gdb_test "print one + two" "\\\$\[0-9\]* = {x = 6, y = 8}"

# If GDB fails to restore the selected frame properly after the

# inferior function call above (see GDB PR 1155 for an explanation of

# why this might happen), all the subsequent tests will fail.  We

# should detect report that failure, but let the marker call finish so

# that the rest of the tests can run undisturbed.

gdb_test_multiple "frame" "re-selected 'main' frame after inferior call" {

    -re "#0  marker1.*$gdb_prompt $" {

        setup_kfail "gdb/1155" s390-*-linux-gnu

        fail "re-selected 'main' frame after inferior call"

        gdb_test "finish" ".*main.*at .*userdef.cc:.*// marker1-returns-here.*" \

                "finish call to marker1"

    }

    -re "#1  ($hex in )?main.*$gdb_prompt $" {

        pass "re-selected 'main' frame after inferior call"

    }

}

gdb_test "print one - two" "\\\$\[0-9\]* = {x = -2, y = -2}"

gdb_test "print one * two" "\\\$\[0-9\]* = {x = 8, y = 15}"

gdb_test "print one / two" "\\\$\[0-9\]* = {x = 0, y = 0}"

gdb_test "print one % two" "\\\$\[0-9\]* = {x = 2, y = 3}"

gdb_test "print one && two" "\\\$\[0-9\]* = 1\[\r\n\]"

gdb_test "print one || two" "\\\$\[0-9\]* = 1\[\r\n\]"

gdb_test "print one & two" "\\\$\[0-9\]* = {x = 0, y = 1}"

gdb_test "print one | two" "\\\$\[0-9\]* = {x = 6, y = 7}"

gdb_test "print one ^ two" "\\\$\[0-9\]* = {x = 6, y = 6}"

gdb_test "print one < two" "\\\$\[0-9\]* = 1\[\r\n\]"

gdb_test "print one <= two" "\\\$\[0-9\]* = 1\[\r\n\]"

gdb_test "print one > two" "\\\$\[0-9\]* = 0\[\r\n\]"

gdb_test "print one >= two" "\\\$\[0-9\]* = 0\[\r\n\]"

gdb_test "print one == two" "\\\$\[0-9\]* = 0\[\r\n\]"

gdb_test "print one != two" "\\\$\[0-9\]* = 1\[\r\n\]"

# Can't really check the output of this one without knowing

# target integer width.  Make sure we don't try to call

# the iostreams operator instead, though.

gdb_test "print one << 31" "\\\$\[0-9\]* = {x = -?\[0-9\]*, y = -?\[0-9\]*}"

# Should be fine even on < 32-bit targets.

gdb_test "print one >> 31" "\\\$\[0-9\]* = {x = 0, y = 0}"

gdb_test "print !one" "\\\$\[0-9\]* = 0\[\r\n\]"

# Assumes 2's complement.  So does everything...

gdb_test "print +one" "\\\$\[0-9\]* = {x = 2, y = 3}"

gdb_test "print ~one" "\\\$\[0-9\]* = {x = -3, y = -4}"

gdb_test "print -one" "\\\$\[0-9\]* = {x = -2, y = -3}"

gdb_test "print one++" "\\\$\[0-9\]* = {x = 2, y = 4}"

gdb_test "print ++one" "\\\$\[0-9\]* = {x = 3, y = 4}"

gdb_test "print one--" "\\\$\[0-9\]* = {x = 3, y = 3}"

gdb_test "print --one" "\\\$\[0-9\]* = {x = 2, y = 3}"

gdb_test "print one += 7" "\\\$\[0-9\]* = {x = 9, y = 10}"

gdb_test "print two = one" "\\\$\[0-9\]* = {x = 9, y = 10}"

# Check that GDB tolerates whitespace in operator names.

gdb_test "break A2::'operator+'" ".*Breakpoint $decimal at.*"

gdb_test "break A2::'operator +'" ".*Breakpoint $decimal at.*"

# Check that GDB handles operator* correctly.

gdb_test "print c" "\\\$\[0-9\]* = {m = {z = .*}}"

gdb_test "print *c" "\\\$\[0-9\]* = \\(Member &\\) @$hex: {z = .*}"

gdb_test "print &*c" "\\\$\[0-9\]* = \\(Member \\*\\) $hex"

gdb_test "ptype &*c" "type = struct Member {\[\r\n \]+int z;\[\r\n\]+} &\\*"

gdb_exit

return 0