URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-6.8/] [sim/] [arm/] [thumbemu.c] - Blame information for rev 855

Go to most recent revision | Details | Compare with Previous | View Log


/*  thumbemu.c -- Thumb instruction emulation.
    Copyright (C) 1996, Cygnus Software Technologies Ltd.
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
 
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
 
/* We can provide simple Thumb simulation by decoding the Thumb
instruction into its corresponding ARM instruction, and using the
existing ARM simulator.  */
 
#ifndef MODET                   /* required for the Thumb instruction support */
#if 1
#error "MODET needs to be defined for the Thumb world to work"
#else
#define MODET (1)
#endif
#endif
 
#include "armdefs.h"
#include "armemu.h"
#include "armos.h"
 
/* Attempt to emulate an ARMv6 instruction.
   Stores t_branch into PVALUE upon success or t_undefined otherwise.  */
 
static void
handle_v6_thumb_insn (ARMul_State * state,
                      ARMword       tinstr,
                      tdstate *     pvalid)
{
  ARMword Rd;
  ARMword Rm;
 
  if (! state->is_v6)
    {
      * pvalid = t_undefined;
      return;
    }
 
  switch (tinstr & 0xFFC0)
    {
    case 0xb660: /* cpsie */
    case 0xb670: /* cpsid */
    case 0x4600: /* cpy */
    case 0xba00: /* rev */
    case 0xba40: /* rev16 */
    case 0xbac0: /* revsh */
    case 0xb650: /* setend */
    default:
      printf ("Unhandled v6 thumb insn: %04x\n", tinstr);
      * pvalid = t_undefined;
      return;
 
    case 0xb200: /* sxth */
      Rm = state->Reg [(tinstr & 0x38) >> 3];
      if (Rm & 0x8000)
        state->Reg [(tinstr & 0x7)] = (Rm & 0xffff) | 0xffff0000;
      else
        state->Reg [(tinstr & 0x7)] = Rm & 0xffff;
      break;
    case 0xb240: /* sxtb */
      Rm = state->Reg [(tinstr & 0x38) >> 3];
      if (Rm & 0x80)
        state->Reg [(tinstr & 0x7)] = (Rm & 0xff) | 0xffffff00;
      else
        state->Reg [(tinstr & 0x7)] = Rm & 0xff;
      break;
    case 0xb280: /* uxth */
      Rm = state->Reg [(tinstr & 0x38) >> 3];
      state->Reg [(tinstr & 0x7)] = Rm & 0xffff;
      break;
    case 0xb2c0: /* uxtb */
      Rm = state->Reg [(tinstr & 0x38) >> 3];
      state->Reg [(tinstr & 0x7)] = Rm & 0xff;
      break;
    }
  /* Indicate that the instruction has been processed.  */
  * pvalid = t_branch;
}
 
/* Decode a 16bit Thumb instruction.  The instruction is in the low
   16-bits of the tinstr field, with the following Thumb instruction
   held in the high 16-bits.  Passing in two Thumb instructions allows
   easier simulation of the special dual BL instruction.  */
 
tdstate
ARMul_ThumbDecode (ARMul_State * state,
                   ARMword       pc,
                   ARMword       tinstr,
                   ARMword *     ainstr)
{
  tdstate valid = t_decoded;    /* default assumes a valid instruction */
  ARMword next_instr;
 
  if (state->bigendSig)
    {
      next_instr = tinstr & 0xFFFF;
      tinstr >>= 16;
    }
  else
    {
      next_instr = tinstr >> 16;
      tinstr &= 0xFFFF;
    }
 
#if 1                           /* debugging to catch non updates */
  *ainstr = 0xDEADC0DE;
#endif
 
  switch ((tinstr & 0xF800) >> 11)
    {
    case 0:                      /* LSL */
    case 1:                     /* LSR */
    case 2:                     /* ASR */
      /* Format 1 */
      *ainstr = 0xE1B00000      /* base opcode */
        | ((tinstr & 0x1800) >> (11 - 5))       /* shift type */
        | ((tinstr & 0x07C0) << (7 - 6))        /* imm5 */
        | ((tinstr & 0x0038) >> 3)      /* Rs */
        | ((tinstr & 0x0007) << 12);    /* Rd */
      break;
    case 3:                     /* ADD/SUB */
      /* Format 2 */
      {
        ARMword subset[4] = {
          0xE0900000,           /* ADDS Rd,Rs,Rn    */
          0xE0500000,           /* SUBS Rd,Rs,Rn    */
          0xE2900000,           /* ADDS Rd,Rs,#imm3 */
          0xE2500000            /* SUBS Rd,Rs,#imm3 */
        };
        /* It is quicker indexing into a table, than performing switch
           or conditionals: */
        *ainstr = subset[(tinstr & 0x0600) >> 9]        /* base opcode */
          | ((tinstr & 0x01C0) >> 6)    /* Rn or imm3 */
          | ((tinstr & 0x0038) << (16 - 3))     /* Rs */
          | ((tinstr & 0x0007) << (12 - 0));     /* Rd */
      }
      break;
    case 4:                     /* MOV */
    case 5:                     /* CMP */
    case 6:                     /* ADD */
    case 7:                     /* SUB */
      /* Format 3 */
      {
        ARMword subset[4] = {
          0xE3B00000,           /* MOVS Rd,#imm8    */
          0xE3500000,           /* CMP  Rd,#imm8    */
          0xE2900000,           /* ADDS Rd,Rd,#imm8 */
          0xE2500000,           /* SUBS Rd,Rd,#imm8 */
        };
        *ainstr = subset[(tinstr & 0x1800) >> 11]       /* base opcode */
          | ((tinstr & 0x00FF) >> 0)     /* imm8 */
          | ((tinstr & 0x0700) << (16 - 8))     /* Rn */
          | ((tinstr & 0x0700) << (12 - 8));    /* Rd */
      }
      break;
    case 8:                     /* Arithmetic and high register transfers */
      /* TODO: Since the subsets for both Format 4 and Format 5
         instructions are made up of different ARM encodings, we could
         save the following conditional, and just have one large
         subset. */
      if ((tinstr & (1 << 10)) == 0)
        {
          /* Format 4 */
          struct
          {
            ARMword opcode;
            enum
            { t_norm, t_shift, t_neg, t_mul }
            otype;
          }
          subset[16] =
          {
            { 0xE0100000, t_norm},                      /* ANDS Rd,Rd,Rs     */
            { 0xE0300000, t_norm},                      /* EORS Rd,Rd,Rs     */
            { 0xE1B00010, t_shift},                     /* MOVS Rd,Rd,LSL Rs */
            { 0xE1B00030, t_shift},                     /* MOVS Rd,Rd,LSR Rs */
            { 0xE1B00050, t_shift},                     /* MOVS Rd,Rd,ASR Rs */
            { 0xE0B00000, t_norm},                      /* ADCS Rd,Rd,Rs     */
            { 0xE0D00000, t_norm},                      /* SBCS Rd,Rd,Rs     */
            { 0xE1B00070, t_shift},                     /* MOVS Rd,Rd,ROR Rs */
            { 0xE1100000, t_norm},                      /* TST  Rd,Rs        */
            { 0xE2700000, t_neg},                       /* RSBS Rd,Rs,#0     */
            { 0xE1500000, t_norm},                      /* CMP  Rd,Rs        */
            { 0xE1700000, t_norm},                      /* CMN  Rd,Rs        */
            { 0xE1900000, t_norm},                      /* ORRS Rd,Rd,Rs     */
            { 0xE0100090, t_mul} ,                      /* MULS Rd,Rd,Rs     */
            { 0xE1D00000, t_norm},                      /* BICS Rd,Rd,Rs     */
            { 0xE1F00000, t_norm}       /* MVNS Rd,Rs        */
          };
          *ainstr = subset[(tinstr & 0x03C0) >> 6].opcode;      /* base */
          switch (subset[(tinstr & 0x03C0) >> 6].otype)
            {
            case t_norm:
              *ainstr |= ((tinstr & 0x0007) << 16)      /* Rn */
                | ((tinstr & 0x0007) << 12)     /* Rd */
                | ((tinstr & 0x0038) >> 3);     /* Rs */
              break;
            case t_shift:
              *ainstr |= ((tinstr & 0x0007) << 12)      /* Rd */
                | ((tinstr & 0x0007) >> 0)       /* Rm */
                | ((tinstr & 0x0038) << (8 - 3));       /* Rs */
              break;
            case t_neg:
              *ainstr |= ((tinstr & 0x0007) << 12)      /* Rd */
                | ((tinstr & 0x0038) << (16 - 3));      /* Rn */
              break;
            case t_mul:
              *ainstr |= ((tinstr & 0x0007) << 16)      /* Rd */
                | ((tinstr & 0x0007) << 8)      /* Rs */
                | ((tinstr & 0x0038) >> 3);     /* Rm */
              break;
            }
        }
      else
        {
          /* Format 5 */
          ARMword Rd = ((tinstr & 0x0007) >> 0);
          ARMword Rs = ((tinstr & 0x0038) >> 3);
          if (tinstr & (1 << 7))
            Rd += 8;
          if (tinstr & (1 << 6))
            Rs += 8;
          switch ((tinstr & 0x03C0) >> 6)
            {
            case 0x1:           /* ADD Rd,Rd,Hs */
            case 0x2:           /* ADD Hd,Hd,Rs */
            case 0x3:           /* ADD Hd,Hd,Hs */
              *ainstr = 0xE0800000      /* base */
                | (Rd << 16)    /* Rn */
                | (Rd << 12)    /* Rd */
                | (Rs << 0);     /* Rm */
              break;
            case 0x5:           /* CMP Rd,Hs */
            case 0x6:           /* CMP Hd,Rs */
            case 0x7:           /* CMP Hd,Hs */
              *ainstr = 0xE1500000      /* base */
                | (Rd << 16)    /* Rn */
                | (Rd << 12)    /* Rd */
                | (Rs << 0);     /* Rm */
              break;
            case 0x9:           /* MOV Rd,Hs */
            case 0xA:           /* MOV Hd,Rs */
            case 0xB:           /* MOV Hd,Hs */
              *ainstr = 0xE1A00000      /* base */
                | (Rd << 16)    /* Rn */
                | (Rd << 12)    /* Rd */
                | (Rs << 0);     /* Rm */
              break;
            case 0xC:           /* BX Rs */
            case 0xD:           /* BX Hs */
              *ainstr = 0xE12FFF10      /* base */
                | ((tinstr & 0x0078) >> 3);     /* Rd */
              break;
            case 0xE:           /* UNDEFINED */
            case 0xF:           /* UNDEFINED */
              if (state->is_v5)
                {
                  /* BLX Rs; BLX Hs */
                  *ainstr = 0xE12FFF30  /* base */
                    | ((tinstr & 0x0078) >> 3); /* Rd */
                  break;
                }
              /* Drop through.  */
            case 0x0:           /* UNDEFINED */
            case 0x4:           /* UNDEFINED */
            case 0x8:           /* UNDEFINED */
              handle_v6_thumb_insn (state, tinstr, & valid);
              break;
            }
        }
      break;
    case 9:                     /* LDR Rd,[PC,#imm8] */
      /* Format 6 */
      *ainstr = 0xE59F0000      /* base */
        | ((tinstr & 0x0700) << (12 - 8))       /* Rd */
        | ((tinstr & 0x00FF) << (2 - 0));        /* off8 */
      break;
    case 10:
    case 11:
      /* TODO: Format 7 and Format 8 perform the same ARM encoding, so
         the following could be merged into a single subset, saving on
         the following boolean: */
      if ((tinstr & (1 << 9)) == 0)
        {
          /* Format 7 */
          ARMword subset[4] = {
            0xE7800000,         /* STR  Rd,[Rb,Ro] */
            0xE7C00000,         /* STRB Rd,[Rb,Ro] */
            0xE7900000,         /* LDR  Rd,[Rb,Ro] */
            0xE7D00000          /* LDRB Rd,[Rb,Ro] */
          };
          *ainstr = subset[(tinstr & 0x0C00) >> 10]     /* base */
            | ((tinstr & 0x0007) << (12 - 0))    /* Rd */
            | ((tinstr & 0x0038) << (16 - 3))   /* Rb */
            | ((tinstr & 0x01C0) >> 6); /* Ro */
        }
      else
        {
          /* Format 8 */
          ARMword subset[4] = {
            0xE18000B0,         /* STRH  Rd,[Rb,Ro] */
            0xE19000D0,         /* LDRSB Rd,[Rb,Ro] */
            0xE19000B0,         /* LDRH  Rd,[Rb,Ro] */
            0xE19000F0          /* LDRSH Rd,[Rb,Ro] */
          };
          *ainstr = subset[(tinstr & 0x0C00) >> 10]     /* base */
            | ((tinstr & 0x0007) << (12 - 0))    /* Rd */
            | ((tinstr & 0x0038) << (16 - 3))   /* Rb */
            | ((tinstr & 0x01C0) >> 6); /* Ro */
        }
      break;
    case 12:                    /* STR Rd,[Rb,#imm5] */
    case 13:                    /* LDR Rd,[Rb,#imm5] */
    case 14:                    /* STRB Rd,[Rb,#imm5] */
    case 15:                    /* LDRB Rd,[Rb,#imm5] */
      /* Format 9 */
      {
        ARMword subset[4] = {
          0xE5800000,           /* STR  Rd,[Rb,#imm5] */
          0xE5900000,           /* LDR  Rd,[Rb,#imm5] */
          0xE5C00000,           /* STRB Rd,[Rb,#imm5] */
          0xE5D00000            /* LDRB Rd,[Rb,#imm5] */
        };
        /* The offset range defends on whether we are transferring a
           byte or word value: */
        *ainstr = subset[(tinstr & 0x1800) >> 11]       /* base */
          | ((tinstr & 0x0007) << (12 - 0))      /* Rd */
          | ((tinstr & 0x0038) << (16 - 3))     /* Rb */
          | ((tinstr & 0x07C0) >> (6 - ((tinstr & (1 << 12)) ? 0 : 2))); /* off5 */
      }
      break;
    case 16:                    /* STRH Rd,[Rb,#imm5] */
    case 17:                    /* LDRH Rd,[Rb,#imm5] */
      /* Format 10 */
      *ainstr = ((tinstr & (1 << 11))   /* base */
                 ? 0xE1D000B0   /* LDRH */
                 : 0xE1C000B0)  /* STRH */
        | ((tinstr & 0x0007) << (12 - 0))        /* Rd */
        | ((tinstr & 0x0038) << (16 - 3))       /* Rb */
        | ((tinstr & 0x01C0) >> (6 - 1))        /* off5, low nibble */
        | ((tinstr & 0x0600) >> (9 - 8));       /* off5, high nibble */
      break;
    case 18:                    /* STR Rd,[SP,#imm8] */
    case 19:                    /* LDR Rd,[SP,#imm8] */
      /* Format 11 */
      *ainstr = ((tinstr & (1 << 11))   /* base */
                 ? 0xE59D0000   /* LDR */
                 : 0xE58D0000)  /* STR */
        | ((tinstr & 0x0700) << (12 - 8))       /* Rd */
        | ((tinstr & 0x00FF) << 2);     /* off8 */
      break;
    case 20:                    /* ADD Rd,PC,#imm8 */
    case 21:                    /* ADD Rd,SP,#imm8 */
      /* Format 12 */
      if ((tinstr & (1 << 11)) == 0)
        {
          /* NOTE: The PC value used here should by word aligned */
          /* We encode shift-left-by-2 in the rotate immediate field,
             so no shift of off8 is needed.  */
          *ainstr = 0xE28F0F00  /* base */
            | ((tinstr & 0x0700) << (12 - 8))   /* Rd */
            | (tinstr & 0x00FF);        /* off8 */
        }
      else
        {
          /* We encode shift-left-by-2 in the rotate immediate field,
             so no shift of off8 is needed.  */
          *ainstr = 0xE28D0F00  /* base */
            | ((tinstr & 0x0700) << (12 - 8))   /* Rd */
            | (tinstr & 0x00FF);        /* off8 */
        }
      break;
    case 22:
    case 23:
      switch (tinstr & 0x0F00)
        {
        case 0x0000:
          /* Format 13 */
          /* NOTE: The instruction contains a shift left of 2
             equivalent (implemented as ROR #30):  */
          *ainstr = ((tinstr & (1 << 7))        /* base */
                     ? 0xE24DDF00       /* SUB */
                     : 0xE28DDF00)      /* ADD */
            | (tinstr & 0x007F);        /* off7 */
          break;
        case 0x0400:
          /* Format 14 - Push */
          * ainstr = 0xE92D0000 | (tinstr & 0x00FF);
          break;
        case 0x0500:
          /* Format 14 - Push + LR */
          * ainstr = 0xE92D4000 | (tinstr & 0x00FF);
          break;
        case 0x0c00:
          /* Format 14 - Pop */
          * ainstr = 0xE8BD0000 | (tinstr & 0x00FF);
          break;
        case 0x0d00:
          /* Format 14 - Pop + PC */
          * ainstr = 0xE8BD8000 | (tinstr & 0x00FF);
          break;
        case 0x0e00:
          if (state->is_v5)
            {
              /* This is normally an undefined instruction.  The v5t architecture
                 defines this particular pattern as a BKPT instruction, for
                 hardware assisted debugging.  We map onto the arm BKPT
                 instruction.  */
              * ainstr = 0xE1200070 | ((tinstr & 0xf0) << 4) | (tinstr & 0xf);
              break;
            }
          /* Drop through.  */
        default:
          /* Everything else is an undefined instruction.  */
          handle_v6_thumb_insn (state, tinstr, & valid);
          break;
        }
      break;
    case 24:                    /* STMIA */
    case 25:                    /* LDMIA */
      /* Format 15 */
      *ainstr = ((tinstr & (1 << 11))   /* base */
                 ? 0xE8B00000   /* LDMIA */
                 : 0xE8A00000)  /* STMIA */
        | ((tinstr & 0x0700) << (16 - 8))       /* Rb */
        | (tinstr & 0x00FF);    /* mask8 */
      break;
    case 26:                    /* Bcc */
    case 27:                    /* Bcc/SWI */
      if ((tinstr & 0x0F00) == 0x0F00)
        {
          /* Format 17 : SWI */
          *ainstr = 0xEF000000;
          /* Breakpoint must be handled specially.  */
          if ((tinstr & 0x00FF) == 0x18)
            *ainstr |= ((tinstr & 0x00FF) << 16);
          /* New breakpoint value.  See gdb/arm-tdep.c  */
          else if ((tinstr & 0x00FF) == 0xFE)
            *ainstr |= SWI_Breakpoint;
          else
            *ainstr |= (tinstr & 0x00FF);
        }
      else if ((tinstr & 0x0F00) != 0x0E00)
        {
          /* Format 16 */
          int doit = FALSE;
          /* TODO: Since we are doing a switch here, we could just add
             the SWI and undefined instruction checks into this
             switch to same on a couple of conditionals: */
          switch ((tinstr & 0x0F00) >> 8)
            {
            case EQ:
              doit = ZFLAG;
              break;
            case NE:
              doit = !ZFLAG;
              break;
            case VS:
              doit = VFLAG;
              break;
            case VC:
              doit = !VFLAG;
              break;
            case MI:
              doit = NFLAG;
              break;
            case PL:
              doit = !NFLAG;
              break;
            case CS:
              doit = CFLAG;
              break;
            case CC:
              doit = !CFLAG;
              break;
            case HI:
              doit = (CFLAG && !ZFLAG);
              break;
            case LS:
              doit = (!CFLAG || ZFLAG);
              break;
            case GE:
              doit = ((!NFLAG && !VFLAG) || (NFLAG && VFLAG));
              break;
            case LT:
              doit = ((NFLAG && !VFLAG) || (!NFLAG && VFLAG));
              break;
            case GT:
              doit = ((!NFLAG && !VFLAG && !ZFLAG)
                      || (NFLAG && VFLAG && !ZFLAG));
              break;
            case LE:
              doit = ((NFLAG && !VFLAG) || (!NFLAG && VFLAG)) || ZFLAG;
              break;
            }
          if (doit)
            {
              state->Reg[15] = (pc + 4
                                + (((tinstr & 0x7F) << 1)
                                   | ((tinstr & (1 << 7)) ? 0xFFFFFF00 : 0)));
              FLUSHPIPE;
            }
          valid = t_branch;
        }
      else
        /* UNDEFINED : cc=1110(AL) uses different format.  */
        handle_v6_thumb_insn (state, tinstr, & valid);
      break;
    case 28:                    /* B */
      /* Format 18 */
      state->Reg[15] = (pc + 4
                        + (((tinstr & 0x3FF) << 1)
                           | ((tinstr & (1 << 10)) ? 0xFFFFF800 : 0)));
      FLUSHPIPE;
      valid = t_branch;
      break;
    case 29:                    /* UNDEFINED */
      if (state->is_v5)
        {
          if (tinstr & 1)
            {
              handle_v6_thumb_insn (state, tinstr, & valid);
              break;
            }
          /* Drop through.  */
 
          /* Format 19 */
          /* There is no single ARM instruction equivalent for this
             instruction. Also, it should only ever be matched with the
             fmt19 "BL/BLX instruction 1" instruction.  However, we do
             allow the simulation of it on its own, with undefined results
             if r14 is not suitably initialised.  */
          {
            ARMword tmp = (pc + 2);
 
            state->Reg[15] = ((state->Reg[14] + ((tinstr & 0x07FF) << 1))
                              & 0xFFFFFFFC);
            CLEART;
            state->Reg[14] = (tmp | 1);
            valid = t_branch;
            FLUSHPIPE;
            break;
          }
        }
 
      handle_v6_thumb_insn (state, tinstr, & valid);
      break;
 
    case 30:                    /* BL instruction 1 */
      /* Format 19 */
      /* There is no single ARM instruction equivalent for this Thumb
         instruction. To keep the simulation simple (from the user
         perspective) we check if the following instruction is the
         second half of this BL, and if it is we simulate it
         immediately.  */
      state->Reg[14] = state->Reg[15] \
        + (((tinstr & 0x07FF) << 12) \
           | ((tinstr & (1 << 10)) ? 0xFF800000 : 0));
 
      valid = t_branch;         /* in-case we don't have the 2nd half */
      tinstr = next_instr;      /* move the instruction down */
      pc += 2;                  /* point the pc at the 2nd half */
      if (((tinstr & 0xF800) >> 11) != 31)
        {
          if (((tinstr & 0xF800) >> 11) == 29)
            {
              ARMword tmp = (pc + 2);
 
              state->Reg[15] = ((state->Reg[14]
                                 + ((tinstr & 0x07FE) << 1))
                                & 0xFFFFFFFC);
              CLEART;
              state->Reg[14] = (tmp | 1);
              valid = t_branch;
              FLUSHPIPE;
            }
          else
            /* Exit, since not correct instruction. */
            pc -= 2;
          break;
        }
      /* else we fall through to process the second half of the BL */
      pc += 2;                  /* point the pc at the 2nd half */
    case 31:                    /* BL instruction 2 */
      /* Format 19 */
      /* There is no single ARM instruction equivalent for this
         instruction. Also, it should only ever be matched with the
         fmt19 "BL instruction 1" instruction. However, we do allow
         the simulation of it on its own, with undefined results if
         r14 is not suitably initialised.  */
      {
        ARMword tmp = pc;
 
        state->Reg[15] = (state->Reg[14] + ((tinstr & 0x07FF) << 1));
        state->Reg[14] = (tmp | 1);
        valid = t_branch;
        FLUSHPIPE;
      }
      break;
    }
 
  return valid;
}

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-6.8/] [sim/] [arm/] [thumbemu.c] - Blame information for rev 855

Line No.	Rev	Author	Line
1	24	jeremybenn	`/* thumbemu.c -- Thumb instruction emulation.`
2			`Copyright (C) 1996, Cygnus Software Technologies Ltd.`
3
4			`This program is free software; you can redistribute it and/or modify`
5			`it under the terms of the GNU General Public License as published by`
6			`the Free Software Foundation; either version 2 of the License, or`
7			`(at your option) any later version.`
8
9			`This program is distributed in the hope that it will be useful,`
10			`but WITHOUT ANY WARRANTY; without even the implied warranty of`
11			`MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
12			`GNU General Public License for more details.`
13
14			`You should have received a copy of the GNU General Public License`
15			`along with this program; if not, write to the Free Software`
16			`Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */`
17
18			`/* We can provide simple Thumb simulation by decoding the Thumb`
19			`instruction into its corresponding ARM instruction, and using the`
20			`existing ARM simulator. */`
21
22			`#ifndef MODET /* required for the Thumb instruction support */`
23			`#if 1`
24			`#error "MODET needs to be defined for the Thumb world to work"`
25			`#else`
26			`#define MODET (1)`
27			`#endif`
28			`#endif`
29
30			`#include "armdefs.h"`
31			`#include "armemu.h"`
32			`#include "armos.h"`
33
34			`/* Attempt to emulate an ARMv6 instruction.`
35			`Stores t_branch into PVALUE upon success or t_undefined otherwise. */`
36
37			`static void`
38			`handle_v6_thumb_insn (ARMul_State * state,`
39			`ARMword tinstr,`
40			`tdstate * pvalid)`
41			`{`
42			`ARMword Rd;`
43			`ARMword Rm;`
44
45			`if (! state->is_v6)`
46			`{`
47			`* pvalid = t_undefined;`
48			`return;`
49			`}`
50
51			`switch (tinstr & 0xFFC0)`
52			`{`
53			`case 0xb660: /* cpsie */`
54			`case 0xb670: /* cpsid */`
55			`case 0x4600: /* cpy */`
56			`case 0xba00: /* rev */`
57			`case 0xba40: /* rev16 */`
58			`case 0xbac0: /* revsh */`
59			`case 0xb650: /* setend */`
60			`default:`
61			`printf ("Unhandled v6 thumb insn: %04x\n", tinstr);`
62			`* pvalid = t_undefined;`
63			`return;`
64
65			`case 0xb200: /* sxth */`
66			`Rm = state->Reg [(tinstr & 0x38) >> 3];`
67			`if (Rm & 0x8000)`
68			`state->Reg [(tinstr & 0x7)] = (Rm & 0xffff) \| 0xffff0000;`
69			`else`
70			`state->Reg [(tinstr & 0x7)] = Rm & 0xffff;`
71			`break;`
72			`case 0xb240: /* sxtb */`
73			`Rm = state->Reg [(tinstr & 0x38) >> 3];`
74			`if (Rm & 0x80)`
75			`state->Reg [(tinstr & 0x7)] = (Rm & 0xff) \| 0xffffff00;`
76			`else`
77			`state->Reg [(tinstr & 0x7)] = Rm & 0xff;`
78			`break;`
79			`case 0xb280: /* uxth */`
80			`Rm = state->Reg [(tinstr & 0x38) >> 3];`
81			`state->Reg [(tinstr & 0x7)] = Rm & 0xffff;`
82			`break;`
83			`case 0xb2c0: /* uxtb */`
84			`Rm = state->Reg [(tinstr & 0x38) >> 3];`
85			`state->Reg [(tinstr & 0x7)] = Rm & 0xff;`
86			`break;`
87			`}`
88			`/* Indicate that the instruction has been processed. */`
89			`* pvalid = t_branch;`
90			`}`
91
92			`/* Decode a 16bit Thumb instruction. The instruction is in the low`
93			`16-bits of the tinstr field, with the following Thumb instruction`
94			`held in the high 16-bits. Passing in two Thumb instructions allows`
95			`easier simulation of the special dual BL instruction. */`
96
97			`tdstate`
98			`ARMul_ThumbDecode (ARMul_State * state,`
99			`ARMword pc,`
100			`ARMword tinstr,`
101			`ARMword * ainstr)`
102			`{`
103			`tdstate valid = t_decoded; /* default assumes a valid instruction */`
104			`ARMword next_instr;`
105
106			`if (state->bigendSig)`
107			`{`
108			`next_instr = tinstr & 0xFFFF;`
109			`tinstr >>= 16;`
110			`}`
111			`else`
112			`{`
113			`next_instr = tinstr >> 16;`
114			`tinstr &= 0xFFFF;`
115			`}`
116
117			`#if 1 /* debugging to catch non updates */`
118			`*ainstr = 0xDEADC0DE;`
119			`#endif`
120
121			`switch ((tinstr & 0xF800) >> 11)`
122			`{`
123			`case 0: /* LSL */`
124			`case 1: /* LSR */`
125			`case 2: /* ASR */`
126			`/* Format 1 */`
127			`ainstr = 0xE1B00000 / base opcode */`
128			`\| ((tinstr & 0x1800) >> (11 - 5)) /* shift type */`
129			`\| ((tinstr & 0x07C0) << (7 - 6)) /* imm5 */`
130			`\| ((tinstr & 0x0038) >> 3) /* Rs */`
131			`\| ((tinstr & 0x0007) << 12); /* Rd */`
132			`break;`
133			`case 3: /* ADD/SUB */`
134			`/* Format 2 */`
135			`{`
136			`ARMword subset[4] = {`
137			`0xE0900000, /* ADDS Rd,Rs,Rn */`
138			`0xE0500000, /* SUBS Rd,Rs,Rn */`
139			`0xE2900000, /* ADDS Rd,Rs,#imm3 */`
140			`0xE2500000 /* SUBS Rd,Rs,#imm3 */`
141			`};`
142			`/* It is quicker indexing into a table, than performing switch`
143			`or conditionals: */`
144			`ainstr = subset[(tinstr & 0x0600) >> 9] / base opcode */`
145			`\| ((tinstr & 0x01C0) >> 6) /* Rn or imm3 */`
146			`\| ((tinstr & 0x0038) << (16 - 3)) /* Rs */`
147			`\| ((tinstr & 0x0007) << (12 - 0)); /* Rd */`
148			`}`
149			`break;`
150			`case 4: /* MOV */`
151			`case 5: /* CMP */`
152			`case 6: /* ADD */`
153			`case 7: /* SUB */`
154			`/* Format 3 */`
155			`{`
156			`ARMword subset[4] = {`
157			`0xE3B00000, /* MOVS Rd,#imm8 */`
158			`0xE3500000, /* CMP Rd,#imm8 */`
159			`0xE2900000, /* ADDS Rd,Rd,#imm8 */`
160			`0xE2500000, /* SUBS Rd,Rd,#imm8 */`
161			`};`
162			`ainstr = subset[(tinstr & 0x1800) >> 11] / base opcode */`
163			`\| ((tinstr & 0x00FF) >> 0) /* imm8 */`
164			`\| ((tinstr & 0x0700) << (16 - 8)) /* Rn */`
165			`\| ((tinstr & 0x0700) << (12 - 8)); /* Rd */`
166			`}`
167			`break;`
168			`case 8: /* Arithmetic and high register transfers */`
169			`/* TODO: Since the subsets for both Format 4 and Format 5`
170			`instructions are made up of different ARM encodings, we could`
171			`save the following conditional, and just have one large`
172			`subset. */`
173			`if ((tinstr & (1 << 10)) == 0)`
174			`{`
175			`/* Format 4 */`
176			`struct`
177			`{`
178			`ARMword opcode;`
179			`enum`
180			`{ t_norm, t_shift, t_neg, t_mul }`
181			`otype;`
182			`}`
183			`subset[16] =`
184			`{`
185			`{ 0xE0100000, t_norm}, /* ANDS Rd,Rd,Rs */`
186			`{ 0xE0300000, t_norm}, /* EORS Rd,Rd,Rs */`
187			`{ 0xE1B00010, t_shift}, /* MOVS Rd,Rd,LSL Rs */`
188			`{ 0xE1B00030, t_shift}, /* MOVS Rd,Rd,LSR Rs */`
189			`{ 0xE1B00050, t_shift}, /* MOVS Rd,Rd,ASR Rs */`
190			`{ 0xE0B00000, t_norm}, /* ADCS Rd,Rd,Rs */`
191			`{ 0xE0D00000, t_norm}, /* SBCS Rd,Rd,Rs */`
192			`{ 0xE1B00070, t_shift}, /* MOVS Rd,Rd,ROR Rs */`
193			`{ 0xE1100000, t_norm}, /* TST Rd,Rs */`
194			`{ 0xE2700000, t_neg}, /* RSBS Rd,Rs,#0 */`
195			`{ 0xE1500000, t_norm}, /* CMP Rd,Rs */`
196			`{ 0xE1700000, t_norm}, /* CMN Rd,Rs */`
197			`{ 0xE1900000, t_norm}, /* ORRS Rd,Rd,Rs */`
198			`{ 0xE0100090, t_mul} , /* MULS Rd,Rd,Rs */`
199			`{ 0xE1D00000, t_norm}, /* BICS Rd,Rd,Rs */`
200			`{ 0xE1F00000, t_norm} /* MVNS Rd,Rs */`
201			`};`
202			`ainstr = subset[(tinstr & 0x03C0) >> 6].opcode; / base */`
203			`switch (subset[(tinstr & 0x03C0) >> 6].otype)`
204			`{`
205			`case t_norm:`
206			`ainstr \|= ((tinstr & 0x0007) << 16) / Rn */`
207			`\| ((tinstr & 0x0007) << 12) /* Rd */`
208			`\| ((tinstr & 0x0038) >> 3); /* Rs */`
209			`break;`
210			`case t_shift:`
211			`ainstr \|= ((tinstr & 0x0007) << 12) / Rd */`
212			`\| ((tinstr & 0x0007) >> 0) /* Rm */`
213			`\| ((tinstr & 0x0038) << (8 - 3)); /* Rs */`
214			`break;`
215			`case t_neg:`
216			`ainstr \|= ((tinstr & 0x0007) << 12) / Rd */`
217			`\| ((tinstr & 0x0038) << (16 - 3)); /* Rn */`
218			`break;`
219			`case t_mul:`
220			`ainstr \|= ((tinstr & 0x0007) << 16) / Rd */`
221			`\| ((tinstr & 0x0007) << 8) /* Rs */`
222			`\| ((tinstr & 0x0038) >> 3); /* Rm */`
223			`break;`
224			`}`
225			`}`
226			`else`
227			`{`
228			`/* Format 5 */`
229			`ARMword Rd = ((tinstr & 0x0007) >> 0);`
230			`ARMword Rs = ((tinstr & 0x0038) >> 3);`
231			`if (tinstr & (1 << 7))`
232			`Rd += 8;`
233			`if (tinstr & (1 << 6))`
234			`Rs += 8;`
235			`switch ((tinstr & 0x03C0) >> 6)`
236			`{`
237			`case 0x1: /* ADD Rd,Rd,Hs */`
238			`case 0x2: /* ADD Hd,Hd,Rs */`
239			`case 0x3: /* ADD Hd,Hd,Hs */`
240			`ainstr = 0xE0800000 / base */`
241			`\| (Rd << 16) /* Rn */`
242			`\| (Rd << 12) /* Rd */`
243			`\| (Rs << 0); /* Rm */`
244			`break;`
245			`case 0x5: /* CMP Rd,Hs */`
246			`case 0x6: /* CMP Hd,Rs */`
247			`case 0x7: /* CMP Hd,Hs */`
248			`ainstr = 0xE1500000 / base */`
249			`\| (Rd << 16) /* Rn */`
250			`\| (Rd << 12) /* Rd */`
251			`\| (Rs << 0); /* Rm */`
252			`break;`
253			`case 0x9: /* MOV Rd,Hs */`
254			`case 0xA: /* MOV Hd,Rs */`
255			`case 0xB: /* MOV Hd,Hs */`
256			`ainstr = 0xE1A00000 / base */`
257			`\| (Rd << 16) /* Rn */`
258			`\| (Rd << 12) /* Rd */`
259			`\| (Rs << 0); /* Rm */`
260			`break;`
261			`case 0xC: /* BX Rs */`
262			`case 0xD: /* BX Hs */`
263			`ainstr = 0xE12FFF10 / base */`
264			`\| ((tinstr & 0x0078) >> 3); /* Rd */`
265			`break;`
266			`case 0xE: /* UNDEFINED */`
267			`case 0xF: /* UNDEFINED */`
268			`if (state->is_v5)`
269			`{`
270			`/* BLX Rs; BLX Hs */`
271			`ainstr = 0xE12FFF30 / base */`
272			`\| ((tinstr & 0x0078) >> 3); /* Rd */`
273			`break;`
274			`}`
275			`/* Drop through. */`
276			`case 0x0: /* UNDEFINED */`
277			`case 0x4: /* UNDEFINED */`
278			`case 0x8: /* UNDEFINED */`
279			`handle_v6_thumb_insn (state, tinstr, & valid);`
280			`break;`
281			`}`
282			`}`
283			`break;`
284			`case 9: /* LDR Rd,[PC,#imm8] */`
285			`/* Format 6 */`
286			`ainstr = 0xE59F0000 / base */`
287			`\| ((tinstr & 0x0700) << (12 - 8)) /* Rd */`
288			`\| ((tinstr & 0x00FF) << (2 - 0)); /* off8 */`
289			`break;`
290			`case 10:`
291			`case 11:`
292			`/* TODO: Format 7 and Format 8 perform the same ARM encoding, so`
293			`the following could be merged into a single subset, saving on`
294			`the following boolean: */`
295			`if ((tinstr & (1 << 9)) == 0)`
296			`{`
297			`/* Format 7 */`
298			`ARMword subset[4] = {`
299			`0xE7800000, /* STR Rd,[Rb,Ro] */`
300			`0xE7C00000, /* STRB Rd,[Rb,Ro] */`
301			`0xE7900000, /* LDR Rd,[Rb,Ro] */`
302			`0xE7D00000 /* LDRB Rd,[Rb,Ro] */`
303			`};`
304			`ainstr = subset[(tinstr & 0x0C00) >> 10] / base */`
305			`\| ((tinstr & 0x0007) << (12 - 0)) /* Rd */`
306			`\| ((tinstr & 0x0038) << (16 - 3)) /* Rb */`
307			`\| ((tinstr & 0x01C0) >> 6); /* Ro */`
308			`}`
309			`else`
310			`{`
311			`/* Format 8 */`
312			`ARMword subset[4] = {`
313			`0xE18000B0, /* STRH Rd,[Rb,Ro] */`
314			`0xE19000D0, /* LDRSB Rd,[Rb,Ro] */`
315			`0xE19000B0, /* LDRH Rd,[Rb,Ro] */`
316			`0xE19000F0 /* LDRSH Rd,[Rb,Ro] */`
317			`};`
318			`ainstr = subset[(tinstr & 0x0C00) >> 10] / base */`
319			`\| ((tinstr & 0x0007) << (12 - 0)) /* Rd */`
320			`\| ((tinstr & 0x0038) << (16 - 3)) /* Rb */`
321			`\| ((tinstr & 0x01C0) >> 6); /* Ro */`
322			`}`
323			`break;`
324			`case 12: /* STR Rd,[Rb,#imm5] */`
325			`case 13: /* LDR Rd,[Rb,#imm5] */`
326			`case 14: /* STRB Rd,[Rb,#imm5] */`
327			`case 15: /* LDRB Rd,[Rb,#imm5] */`
328			`/* Format 9 */`
329			`{`
330			`ARMword subset[4] = {`
331			`0xE5800000, /* STR Rd,[Rb,#imm5] */`
332			`0xE5900000, /* LDR Rd,[Rb,#imm5] */`
333			`0xE5C00000, /* STRB Rd,[Rb,#imm5] */`
334			`0xE5D00000 /* LDRB Rd,[Rb,#imm5] */`
335			`};`
336			`/* The offset range defends on whether we are transferring a`
337			`byte or word value: */`
338			`ainstr = subset[(tinstr & 0x1800) >> 11] / base */`
339			`\| ((tinstr & 0x0007) << (12 - 0)) /* Rd */`
340			`\| ((tinstr & 0x0038) << (16 - 3)) /* Rb */`
341			`\| ((tinstr & 0x07C0) >> (6 - ((tinstr & (1 << 12)) ? 0 : 2))); /* off5 */`
342			`}`
343			`break;`
344			`case 16: /* STRH Rd,[Rb,#imm5] */`
345			`case 17: /* LDRH Rd,[Rb,#imm5] */`
346			`/* Format 10 */`
347			`ainstr = ((tinstr & (1 << 11)) / base */`
348			`? 0xE1D000B0 /* LDRH */`
349			`: 0xE1C000B0) /* STRH */`
350			`\| ((tinstr & 0x0007) << (12 - 0)) /* Rd */`
351			`\| ((tinstr & 0x0038) << (16 - 3)) /* Rb */`
352			`\| ((tinstr & 0x01C0) >> (6 - 1)) /* off5, low nibble */`
353			`\| ((tinstr & 0x0600) >> (9 - 8)); /* off5, high nibble */`
354			`break;`
355			`case 18: /* STR Rd,[SP,#imm8] */`
356			`case 19: /* LDR Rd,[SP,#imm8] */`
357			`/* Format 11 */`
358			`ainstr = ((tinstr & (1 << 11)) / base */`
359			`? 0xE59D0000 /* LDR */`
360			`: 0xE58D0000) /* STR */`
361			`\| ((tinstr & 0x0700) << (12 - 8)) /* Rd */`
362			`\| ((tinstr & 0x00FF) << 2); /* off8 */`
363			`break;`
364			`case 20: /* ADD Rd,PC,#imm8 */`
365			`case 21: /* ADD Rd,SP,#imm8 */`
366			`/* Format 12 */`
367			`if ((tinstr & (1 << 11)) == 0)`
368			`{`
369			`/* NOTE: The PC value used here should by word aligned */`
370			`/* We encode shift-left-by-2 in the rotate immediate field,`
371			`so no shift of off8 is needed. */`
372			`ainstr = 0xE28F0F00 / base */`
373			`\| ((tinstr & 0x0700) << (12 - 8)) /* Rd */`
374			`\| (tinstr & 0x00FF); /* off8 */`
375			`}`
376			`else`
377			`{`
378			`/* We encode shift-left-by-2 in the rotate immediate field,`
379			`so no shift of off8 is needed. */`
380			`ainstr = 0xE28D0F00 / base */`
381			`\| ((tinstr & 0x0700) << (12 - 8)) /* Rd */`
382			`\| (tinstr & 0x00FF); /* off8 */`
383			`}`
384			`break;`
385			`case 22:`
386			`case 23:`
387			`switch (tinstr & 0x0F00)`
388			`{`
389			`case 0x0000:`
390			`/* Format 13 */`
391			`/* NOTE: The instruction contains a shift left of 2`
392			`equivalent (implemented as ROR #30): */`
393			`ainstr = ((tinstr & (1 << 7)) / base */`
394			`? 0xE24DDF00 /* SUB */`
395			`: 0xE28DDF00) /* ADD */`
396			`\| (tinstr & 0x007F); /* off7 */`
397			`break;`
398			`case 0x0400:`
399			`/* Format 14 - Push */`
400			`* ainstr = 0xE92D0000 \| (tinstr & 0x00FF);`
401			`break;`
402			`case 0x0500:`
403			`/* Format 14 - Push + LR */`
404			`* ainstr = 0xE92D4000 \| (tinstr & 0x00FF);`
405			`break;`
406			`case 0x0c00:`
407			`/* Format 14 - Pop */`
408			`* ainstr = 0xE8BD0000 \| (tinstr & 0x00FF);`
409			`break;`
410			`case 0x0d00:`
411			`/* Format 14 - Pop + PC */`
412			`* ainstr = 0xE8BD8000 \| (tinstr & 0x00FF);`
413			`break;`
414			`case 0x0e00:`
415			`if (state->is_v5)`
416			`{`
417			`/* This is normally an undefined instruction. The v5t architecture`
418			`defines this particular pattern as a BKPT instruction, for`
419			`hardware assisted debugging. We map onto the arm BKPT`
420			`instruction. */`
421			`* ainstr = 0xE1200070 \| ((tinstr & 0xf0) << 4) \| (tinstr & 0xf);`
422			`break;`
423			`}`
424			`/* Drop through. */`
425			`default:`
426			`/* Everything else is an undefined instruction. */`
427			`handle_v6_thumb_insn (state, tinstr, & valid);`
428			`break;`
429			`}`
430			`break;`
431			`case 24: /* STMIA */`
432			`case 25: /* LDMIA */`
433			`/* Format 15 */`
434			`ainstr = ((tinstr & (1 << 11)) / base */`
435			`? 0xE8B00000 /* LDMIA */`
436			`: 0xE8A00000) /* STMIA */`
437			`\| ((tinstr & 0x0700) << (16 - 8)) /* Rb */`
438			`\| (tinstr & 0x00FF); /* mask8 */`
439			`break;`
440			`case 26: /* Bcc */`
441			`case 27: /* Bcc/SWI */`
442			`if ((tinstr & 0x0F00) == 0x0F00)`
443			`{`
444			`/* Format 17 : SWI */`
445			`*ainstr = 0xEF000000;`
446			`/* Breakpoint must be handled specially. */`
447			`if ((tinstr & 0x00FF) == 0x18)`
448			`*ainstr \|= ((tinstr & 0x00FF) << 16);`
449			`/* New breakpoint value. See gdb/arm-tdep.c */`
450			`else if ((tinstr & 0x00FF) == 0xFE)`
451			`*ainstr \|= SWI_Breakpoint;`
452			`else`
453			`*ainstr \|= (tinstr & 0x00FF);`
454			`}`
455			`else if ((tinstr & 0x0F00) != 0x0E00)`
456			`{`
457			`/* Format 16 */`
458			`int doit = FALSE;`
459			`/* TODO: Since we are doing a switch here, we could just add`
460			`the SWI and undefined instruction checks into this`
461			`switch to same on a couple of conditionals: */`
462			`switch ((tinstr & 0x0F00) >> 8)`
463			`{`
464			`case EQ:`
465			`doit = ZFLAG;`
466			`break;`
467			`case NE:`
468			`doit = !ZFLAG;`
469			`break;`
470			`case VS:`
471			`doit = VFLAG;`
472			`break;`
473			`case VC:`
474			`doit = !VFLAG;`
475			`break;`
476			`case MI:`
477			`doit = NFLAG;`
478			`break;`
479			`case PL:`
480			`doit = !NFLAG;`
481			`break;`
482			`case CS:`
483			`doit = CFLAG;`
484			`break;`
485			`case CC:`
486			`doit = !CFLAG;`
487			`break;`
488			`case HI:`
489			`doit = (CFLAG && !ZFLAG);`
490			`break;`
491			`case LS:`
492			`doit = (!CFLAG \|\| ZFLAG);`
493			`break;`
494			`case GE:`
495			`doit = ((!NFLAG && !VFLAG) \|\| (NFLAG && VFLAG));`
496			`break;`
497			`case LT:`
498			`doit = ((NFLAG && !VFLAG) \|\| (!NFLAG && VFLAG));`
499			`break;`
500			`case GT:`
501			`doit = ((!NFLAG && !VFLAG && !ZFLAG)`
502			`\|\| (NFLAG && VFLAG && !ZFLAG));`
503			`break;`
504			`case LE:`
505			`doit = ((NFLAG && !VFLAG) \|\| (!NFLAG && VFLAG)) \|\| ZFLAG;`
506			`break;`
507			`}`
508			`if (doit)`
509			`{`
510			`state->Reg[15] = (pc + 4`
511			`+ (((tinstr & 0x7F) << 1)`
512			`\| ((tinstr & (1 << 7)) ? 0xFFFFFF00 : 0)));`
513			`FLUSHPIPE;`
514			`}`
515			`valid = t_branch;`
516			`}`
517			`else`
518			`/* UNDEFINED : cc=1110(AL) uses different format. */`
519			`handle_v6_thumb_insn (state, tinstr, & valid);`
520			`break;`
521			`case 28: /* B */`
522			`/* Format 18 */`
523			`state->Reg[15] = (pc + 4`
524			`+ (((tinstr & 0x3FF) << 1)`
525			`\| ((tinstr & (1 << 10)) ? 0xFFFFF800 : 0)));`
526			`FLUSHPIPE;`
527			`valid = t_branch;`
528			`break;`
529			`case 29: /* UNDEFINED */`
530			`if (state->is_v5)`
531			`{`
532			`if (tinstr & 1)`
533			`{`
534			`handle_v6_thumb_insn (state, tinstr, & valid);`
535			`break;`
536			`}`
537			`/* Drop through. */`
538
539			`/* Format 19 */`
540			`/* There is no single ARM instruction equivalent for this`
541			`instruction. Also, it should only ever be matched with the`
542			`fmt19 "BL/BLX instruction 1" instruction. However, we do`
543			`allow the simulation of it on its own, with undefined results`
544			`if r14 is not suitably initialised. */`
545			`{`
546			`ARMword tmp = (pc + 2);`
547
548			`state->Reg[15] = ((state->Reg[14] + ((tinstr & 0x07FF) << 1))`
549			`& 0xFFFFFFFC);`
550			`CLEART;`
551			`state->Reg[14] = (tmp \| 1);`
552			`valid = t_branch;`
553			`FLUSHPIPE;`
554			`break;`
555			`}`
556			`}`
557
558			`handle_v6_thumb_insn (state, tinstr, & valid);`
559			`break;`
560
561			`case 30: /* BL instruction 1 */`
562			`/* Format 19 */`
563			`/* There is no single ARM instruction equivalent for this Thumb`
564			`instruction. To keep the simulation simple (from the user`
565			`perspective) we check if the following instruction is the`
566			`second half of this BL, and if it is we simulate it`
567			`immediately. */`
568			`state->Reg[14] = state->Reg[15] \`
569			`+ (((tinstr & 0x07FF) << 12) \`
570			`\| ((tinstr & (1 << 10)) ? 0xFF800000 : 0));`
571
572			`valid = t_branch; /* in-case we don't have the 2nd half */`
573			`tinstr = next_instr; /* move the instruction down */`
574			`pc += 2; /* point the pc at the 2nd half */`
575			`if (((tinstr & 0xF800) >> 11) != 31)`
576			`{`
577			`if (((tinstr & 0xF800) >> 11) == 29)`
578			`{`
579			`ARMword tmp = (pc + 2);`
580
581			`state->Reg[15] = ((state->Reg[14]`
582			`+ ((tinstr & 0x07FE) << 1))`
583			`& 0xFFFFFFFC);`
584			`CLEART;`
585			`state->Reg[14] = (tmp \| 1);`
586			`valid = t_branch;`
587			`FLUSHPIPE;`
588			`}`
589			`else`
590			`/* Exit, since not correct instruction. */`
591			`pc -= 2;`
592			`break;`
593			`}`
594			`/* else we fall through to process the second half of the BL */`
595			`pc += 2; /* point the pc at the 2nd half */`
596			`case 31: /* BL instruction 2 */`
597			`/* Format 19 */`
598			`/* There is no single ARM instruction equivalent for this`
599			`instruction. Also, it should only ever be matched with the`
600			`fmt19 "BL instruction 1" instruction. However, we do allow`
601			`the simulation of it on its own, with undefined results if`
602			`r14 is not suitably initialised. */`
603			`{`
604			`ARMword tmp = pc;`
605
606			`state->Reg[15] = (state->Reg[14] + ((tinstr & 0x07FF) << 1));`
607			`state->Reg[14] = (tmp \| 1);`
608			`valid = t_branch;`
609			`FLUSHPIPE;`
610			`}`
611			`break;`
612			`}`
613
614			`return valid;`
615			`}`