URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-6.8/] [sim/] [testsuite/] [sim/] [h8300/] [addw.s] - Blame information for rev 856

Go to most recent revision | Details | Compare with Previous | View Log


# Hitachi H8 testcase 'add.w'
# mach(): all
# as(h8300):    --defsym sim_cpu=0
# as(h8300h):   --defsym sim_cpu=1
# as(h8300s):   --defsym sim_cpu=2
# as(h8sx):     --defsym sim_cpu=3
# ld(h8300h):   -m h8300helf
# ld(h8300s):   -m h8300self
# ld(h8sx):     -m h8300sxelf
 
        .include "testutils.inc"
 
        # Instructions tested:
        # add.w xx:3, rd        ; 0 a 0xxx rd   (sx only)
        # add.w xx:16, rd       ; 7 9 1 rd imm16
        # add.w rs, rd          ; 0 9 rs rd
        #
 
        start
 
.if (sim_cpu == h8sx)           ; 3-bit immediate mode only for h8sx
add_w_imm3:
        set_grs_a5a5            ; Fill all general regs with a fixed pattern
        ;;  fixme set ccr
 
        ;;  add.w #xx:3,Rd      ; Immediate 3-bit operand
        add.w   #7, r0          ; FIXME will not assemble yet
;       .word   0x0a70          ; Fake it until assembler will take it.
 
        ;; fixme test ccr       ; H=0 N=1 Z=0 V=0 C=0
        test_h_gr16 0xa5ac r0   ; add result:   a5a5 + 7
        test_h_gr32 0xa5a5a5ac er0      ; add result:   a5a5 + 7
        test_gr_a5a5 1          ; Make sure other general regs not disturbed
        test_gr_a5a5 2
        test_gr_a5a5 3
        test_gr_a5a5 4
        test_gr_a5a5 5
        test_gr_a5a5 6
        test_gr_a5a5 7
.endif
 
.if (sim_cpu)                   ; non-zero means h8300h, s, or sx
add_w_imm16:
        ;; add.w immediate not available in h8300 mode.
        set_grs_a5a5            ; Fill all general regs with a fixed pattern
        ;;  fixme set ccr
 
        ;;  add.w #xx:16,Rd
        add.w   #0x111, r0      ; Immediate 16-bit operand
 
        ;; fixme test ccr       ; H=0 N=1 Z=0 V=0 C=0
        test_h_gr16 0xa6b6 r0   ; add result:   a5a5 + 111
        test_h_gr32 0xa5a5a6b6 er0      ; add result:   a5a5 + 111
        test_gr_a5a5 1          ; Make sure other general regs not disturbed
        test_gr_a5a5 2
        test_gr_a5a5 3
        test_gr_a5a5 4
        test_gr_a5a5 5
        test_gr_a5a5 6
        test_gr_a5a5 7
.endif
 
add_w_reg:
        set_grs_a5a5            ; Fill all general regs with a fixed pattern
        ;;  fixme set ccr
 
        ;;  add.w Rs,Rd
        mov.w   #0x111, r1
        add.w   r1, r0          ; Register operand
 
        ;; fixme test ccr       ; H=0 N=1 Z=0 V=0 C=0
        test_h_gr16 0xa6b6 r0   ; add result:   a5a5 + 111
        test_h_gr16 0x0111 r1
.if (sim_cpu)                   ; non-zero means h8300h, s, or sx
        test_h_gr32 0xa5a5a6b6 er0      ; add result:   a5a5 + 111
        test_h_gr32 0xa5a50111 er1
.endif
        test_gr_a5a5 2          ; Make sure other general regs not disturbed
        test_gr_a5a5 3
        test_gr_a5a5 4
        test_gr_a5a5 5
        test_gr_a5a5 6
        test_gr_a5a5 7
 
        pass
 
        exit 0

Line No.	Rev	Author	Line
1	24	jeremybenn	`# Hitachi H8 testcase 'add.w'`
2			`# mach(): all`
3			`# as(h8300): --defsym sim_cpu=0`
4			`# as(h8300h): --defsym sim_cpu=1`
5			`# as(h8300s): --defsym sim_cpu=2`
6			`# as(h8sx): --defsym sim_cpu=3`
7			`# ld(h8300h): -m h8300helf`
8			`# ld(h8300s): -m h8300self`
9			`# ld(h8sx): -m h8300sxelf`
10
11			`.include "testutils.inc"`
12
13			`# Instructions tested:`
14			`# add.w xx:3, rd ; 0 a 0xxx rd (sx only)`
15			`# add.w xx:16, rd ; 7 9 1 rd imm16`
16			`# add.w rs, rd ; 0 9 rs rd`
17			`#`
18
19			`start`
20
21			`.if (sim_cpu == h8sx) ; 3-bit immediate mode only for h8sx`
22			`add_w_imm3:`
23			`set_grs_a5a5 ; Fill all general regs with a fixed pattern`
24			`;; fixme set ccr`
25
26			`;; add.w #xx:3,Rd ; Immediate 3-bit operand`
27			`add.w #7, r0 ; FIXME will not assemble yet`
28			`; .word 0x0a70 ; Fake it until assembler will take it.`
29
30			`;; fixme test ccr ; H=0 N=1 Z=0 V=0 C=0`
31			`test_h_gr16 0xa5ac r0 ; add result: a5a5 + 7`
32			`test_h_gr32 0xa5a5a5ac er0 ; add result: a5a5 + 7`
33			`test_gr_a5a5 1 ; Make sure other general regs not disturbed`
34			`test_gr_a5a5 2`
35			`test_gr_a5a5 3`
36			`test_gr_a5a5 4`
37			`test_gr_a5a5 5`
38			`test_gr_a5a5 6`
39			`test_gr_a5a5 7`
40			`.endif`
41
42			`.if (sim_cpu) ; non-zero means h8300h, s, or sx`
43			`add_w_imm16:`
44			`;; add.w immediate not available in h8300 mode.`
45			`set_grs_a5a5 ; Fill all general regs with a fixed pattern`
46			`;; fixme set ccr`
47
48			`;; add.w #xx:16,Rd`
49			`add.w #0x111, r0 ; Immediate 16-bit operand`
50
51			`;; fixme test ccr ; H=0 N=1 Z=0 V=0 C=0`
52			`test_h_gr16 0xa6b6 r0 ; add result: a5a5 + 111`
53			`test_h_gr32 0xa5a5a6b6 er0 ; add result: a5a5 + 111`
54			`test_gr_a5a5 1 ; Make sure other general regs not disturbed`
55			`test_gr_a5a5 2`
56			`test_gr_a5a5 3`
57			`test_gr_a5a5 4`
58			`test_gr_a5a5 5`
59			`test_gr_a5a5 6`
60			`test_gr_a5a5 7`
61			`.endif`
62
63			`add_w_reg:`
64			`set_grs_a5a5 ; Fill all general regs with a fixed pattern`
65			`;; fixme set ccr`
66
67			`;; add.w Rs,Rd`
68			`mov.w #0x111, r1`
69			`add.w r1, r0 ; Register operand`
70
71			`;; fixme test ccr ; H=0 N=1 Z=0 V=0 C=0`
72			`test_h_gr16 0xa6b6 r0 ; add result: a5a5 + 111`
73			`test_h_gr16 0x0111 r1`
74			`.if (sim_cpu) ; non-zero means h8300h, s, or sx`
75			`test_h_gr32 0xa5a5a6b6 er0 ; add result: a5a5 + 111`
76			`test_h_gr32 0xa5a50111 er1`
77			`.endif`
78			`test_gr_a5a5 2 ; Make sure other general regs not disturbed`
79			`test_gr_a5a5 3`
80			`test_gr_a5a5 4`
81			`test_gr_a5a5 5`
82			`test_gr_a5a5 6`
83			`test_gr_a5a5 7`
84
85			`pass`
86
87			`exit 0`

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-6.8/] [sim/] [testsuite/] [sim/] [h8300/] [addw.s] - Blame information for rev 856