URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-7.1/] [gdb/] [gnulib/] [memcmp.c] - Blame information for rev 855

Go to most recent revision | Details | Compare with Previous | View Log


/* Copyright (C) 1991, 1993, 1995, 1997, 1998, 2003, 2006, 2009, 2010
Free Software Foundation, Inc.
 
   Contributed by Torbjorn Granlund (tege@sics.se).
 
   NOTE: The canonical source of this file is maintained with the GNU C Library.
   Bugs can be reported to bug-glibc@prep.ai.mit.edu.
 
   This program is free software: you can redistribute it and/or modify it
   under the terms of the GNU General Public License as published by the
   Free Software Foundation; either version 3 of the License, or any
   later version.
 
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
 
   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
#ifndef _LIBC
# include <config.h>
#endif
 
#include <string.h>
 
#undef memcmp
 
#ifdef _LIBC
 
# include <memcopy.h>
# include <endian.h>
 
# if __BYTE_ORDER == __BIG_ENDIAN
#  define WORDS_BIGENDIAN
# endif
 
#else   /* Not in the GNU C library.  */
 
# include <sys/types.h>
 
/* Type to use for aligned memory operations.
   This should normally be the biggest type supported by a single load
   and store.  Must be an unsigned type.  */
# define op_t   unsigned long int
# define OPSIZ  (sizeof(op_t))
 
/* Threshold value for when to enter the unrolled loops.  */
# define OP_T_THRES     16
 
/* Type to use for unaligned operations.  */
typedef unsigned char byte;
 
# ifndef WORDS_BIGENDIAN
#  define MERGE(w0, sh_1, w1, sh_2) (((w0) >> (sh_1)) | ((w1) << (sh_2)))
# else
#  define MERGE(w0, sh_1, w1, sh_2) (((w0) << (sh_1)) | ((w1) >> (sh_2)))
# endif
 
#endif  /* In the GNU C library.  */
 
#ifdef WORDS_BIGENDIAN
# define CMP_LT_OR_GT(a, b) ((a) > (b) ? 1 : -1)
#else
# define CMP_LT_OR_GT(a, b) memcmp_bytes ((a), (b))
#endif
 
/* BE VERY CAREFUL IF YOU CHANGE THIS CODE!  */
 
/* The strategy of this memcmp is:
 
   1. Compare bytes until one of the block pointers is aligned.
 
   2. Compare using memcmp_common_alignment or
      memcmp_not_common_alignment, regarding the alignment of the other
      block after the initial byte operations.  The maximum number of
      full words (of type op_t) are compared in this way.
 
   3. Compare the few remaining bytes.  */
 
#ifndef WORDS_BIGENDIAN
/* memcmp_bytes -- Compare A and B bytewise in the byte order of the machine.
   A and B are known to be different.
   This is needed only on little-endian machines.  */
 
# ifdef  __GNUC__
__inline
# endif
static int
memcmp_bytes (long unsigned int a, long unsigned int b)
{
  long int srcp1 = (long int) &a;
  long int srcp2 = (long int) &b;
  op_t a0, b0;
 
  do
    {
      a0 = ((byte *) srcp1)[0];
      b0 = ((byte *) srcp2)[0];
      srcp1 += 1;
      srcp2 += 1;
    }
  while (a0 == b0);
  return a0 - b0;
}
#endif
 
/* memcmp_common_alignment -- Compare blocks at SRCP1 and SRCP2 with LEN `op_t'
   objects (not LEN bytes!).  Both SRCP1 and SRCP2 should be aligned for
   memory operations on `op_t's.  */
#ifdef  __GNUC__
__inline
#endif
static int
memcmp_common_alignment (long int srcp1, long int srcp2, size_t len)
{
  op_t a0, a1;
  op_t b0, b1;
 
  switch (len % 4)
    {
    default: /* Avoid warning about uninitialized local variables.  */
    case 2:
      a0 = ((op_t *) srcp1)[0];
      b0 = ((op_t *) srcp2)[0];
      srcp1 -= 2 * OPSIZ;
      srcp2 -= 2 * OPSIZ;
      len += 2;
      goto do1;
    case 3:
      a1 = ((op_t *) srcp1)[0];
      b1 = ((op_t *) srcp2)[0];
      srcp1 -= OPSIZ;
      srcp2 -= OPSIZ;
      len += 1;
      goto do2;
    case 0:
      if (OP_T_THRES <= 3 * OPSIZ && len == 0)
        return 0;
      a0 = ((op_t *) srcp1)[0];
      b0 = ((op_t *) srcp2)[0];
      goto do3;
    case 1:
      a1 = ((op_t *) srcp1)[0];
      b1 = ((op_t *) srcp2)[0];
      srcp1 += OPSIZ;
      srcp2 += OPSIZ;
      len -= 1;
      if (OP_T_THRES <= 3 * OPSIZ && len == 0)
        goto do0;
      /* Fall through.  */
    }
 
  do
    {
      a0 = ((op_t *) srcp1)[0];
      b0 = ((op_t *) srcp2)[0];
      if (a1 != b1)
        return CMP_LT_OR_GT (a1, b1);
 
    do3:
      a1 = ((op_t *) srcp1)[1];
      b1 = ((op_t *) srcp2)[1];
      if (a0 != b0)
        return CMP_LT_OR_GT (a0, b0);
 
    do2:
      a0 = ((op_t *) srcp1)[2];
      b0 = ((op_t *) srcp2)[2];
      if (a1 != b1)
        return CMP_LT_OR_GT (a1, b1);
 
    do1:
      a1 = ((op_t *) srcp1)[3];
      b1 = ((op_t *) srcp2)[3];
      if (a0 != b0)
        return CMP_LT_OR_GT (a0, b0);
 
      srcp1 += 4 * OPSIZ;
      srcp2 += 4 * OPSIZ;
      len -= 4;
    }
  while (len != 0);
 
  /* This is the right position for do0.  Please don't move
     it into the loop.  */
 do0:
  if (a1 != b1)
    return CMP_LT_OR_GT (a1, b1);
  return 0;
}
 
/* memcmp_not_common_alignment -- Compare blocks at SRCP1 and SRCP2 with LEN
   `op_t' objects (not LEN bytes!).  SRCP2 should be aligned for memory
   operations on `op_t', but SRCP1 *should be unaligned*.  */
#ifdef  __GNUC__
__inline
#endif
static int
memcmp_not_common_alignment (long int srcp1, long int srcp2, size_t len)
{
  op_t a0, a1, a2, a3;
  op_t b0, b1, b2, b3;
  op_t x;
  int shl, shr;
 
  /* Calculate how to shift a word read at the memory operation
     aligned srcp1 to make it aligned for comparison.  */
 
  shl = 8 * (srcp1 % OPSIZ);
  shr = 8 * OPSIZ - shl;
 
  /* Make SRCP1 aligned by rounding it down to the beginning of the `op_t'
     it points in the middle of.  */
  srcp1 &= -OPSIZ;
 
  switch (len % 4)
    {
    default: /* Avoid warning about uninitialized local variables.  */
    case 2:
      a1 = ((op_t *) srcp1)[0];
      a2 = ((op_t *) srcp1)[1];
      b2 = ((op_t *) srcp2)[0];
      srcp1 -= 1 * OPSIZ;
      srcp2 -= 2 * OPSIZ;
      len += 2;
      goto do1;
    case 3:
      a0 = ((op_t *) srcp1)[0];
      a1 = ((op_t *) srcp1)[1];
      b1 = ((op_t *) srcp2)[0];
      srcp2 -= 1 * OPSIZ;
      len += 1;
      goto do2;
    case 0:
      if (OP_T_THRES <= 3 * OPSIZ && len == 0)
        return 0;
      a3 = ((op_t *) srcp1)[0];
      a0 = ((op_t *) srcp1)[1];
      b0 = ((op_t *) srcp2)[0];
      srcp1 += 1 * OPSIZ;
      goto do3;
    case 1:
      a2 = ((op_t *) srcp1)[0];
      a3 = ((op_t *) srcp1)[1];
      b3 = ((op_t *) srcp2)[0];
      srcp1 += 2 * OPSIZ;
      srcp2 += 1 * OPSIZ;
      len -= 1;
      if (OP_T_THRES <= 3 * OPSIZ && len == 0)
        goto do0;
      /* Fall through.  */
    }
 
  do
    {
      a0 = ((op_t *) srcp1)[0];
      b0 = ((op_t *) srcp2)[0];
      x = MERGE(a2, shl, a3, shr);
      if (x != b3)
        return CMP_LT_OR_GT (x, b3);
 
    do3:
      a1 = ((op_t *) srcp1)[1];
      b1 = ((op_t *) srcp2)[1];
      x = MERGE(a3, shl, a0, shr);
      if (x != b0)
        return CMP_LT_OR_GT (x, b0);
 
    do2:
      a2 = ((op_t *) srcp1)[2];
      b2 = ((op_t *) srcp2)[2];
      x = MERGE(a0, shl, a1, shr);
      if (x != b1)
        return CMP_LT_OR_GT (x, b1);
 
    do1:
      a3 = ((op_t *) srcp1)[3];
      b3 = ((op_t *) srcp2)[3];
      x = MERGE(a1, shl, a2, shr);
      if (x != b2)
        return CMP_LT_OR_GT (x, b2);
 
      srcp1 += 4 * OPSIZ;
      srcp2 += 4 * OPSIZ;
      len -= 4;
    }
  while (len != 0);
 
  /* This is the right position for do0.  Please don't move
     it into the loop.  */
 do0:
  x = MERGE(a2, shl, a3, shr);
  if (x != b3)
    return CMP_LT_OR_GT (x, b3);
  return 0;
}
 
int
rpl_memcmp (const void *s1, const void *s2, size_t len)
{
  op_t a0;
  op_t b0;
  long int srcp1 = (long int) s1;
  long int srcp2 = (long int) s2;
  op_t res;
 
  if (len >= OP_T_THRES)
    {
      /* There are at least some bytes to compare.  No need to test
         for LEN == 0 in this alignment loop.  */
      while (srcp2 % OPSIZ != 0)
        {
          a0 = ((byte *) srcp1)[0];
          b0 = ((byte *) srcp2)[0];
          srcp1 += 1;
          srcp2 += 1;
          res = a0 - b0;
          if (res != 0)
            return res;
          len -= 1;
        }
 
      /* SRCP2 is now aligned for memory operations on `op_t'.
         SRCP1 alignment determines if we can do a simple,
         aligned compare or need to shuffle bits.  */
 
      if (srcp1 % OPSIZ == 0)
        res = memcmp_common_alignment (srcp1, srcp2, len / OPSIZ);
      else
        res = memcmp_not_common_alignment (srcp1, srcp2, len / OPSIZ);
      if (res != 0)
        return res;
 
      /* Number of bytes remaining in the interval [0..OPSIZ-1].  */
      srcp1 += len & -OPSIZ;
      srcp2 += len & -OPSIZ;
      len %= OPSIZ;
    }
 
  /* There are just a few bytes to compare.  Use byte memory operations.  */
  while (len != 0)
    {
      a0 = ((byte *) srcp1)[0];
      b0 = ((byte *) srcp2)[0];
      srcp1 += 1;
      srcp2 += 1;
      res = a0 - b0;
      if (res != 0)
        return res;
      len -= 1;
    }
 
  return 0;
}
 
#ifdef weak_alias
# undef bcmp
weak_alias (memcmp, bcmp)
#endif

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-7.1/] [gdb/] [gnulib/] [memcmp.c] - Blame information for rev 855

Line No.	Rev	Author	Line
1	227	jeremybenn	`/* Copyright (C) 1991, 1993, 1995, 1997, 1998, 2003, 2006, 2009, 2010`
2			`Free Software Foundation, Inc.`
3
4			`Contributed by Torbjorn Granlund (tege@sics.se).`
5
6			`NOTE: The canonical source of this file is maintained with the GNU C Library.`
7			`Bugs can be reported to bug-glibc@prep.ai.mit.edu.`
8
9			`This program is free software: you can redistribute it and/or modify it`
10			`under the terms of the GNU General Public License as published by the`
11			`Free Software Foundation; either version 3 of the License, or any`
12			`later version.`
13
14			`This program is distributed in the hope that it will be useful,`
15			`but WITHOUT ANY WARRANTY; without even the implied warranty of`
16			`MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
17			`GNU General Public License for more details.`
18
19			`You should have received a copy of the GNU General Public License`
20			`along with this program. If not, see <http://www.gnu.org/licenses/>. */`
21
22			`#ifndef _LIBC`
23			`# include <config.h>`
24			`#endif`
25
26			`#include <string.h>`
27
28			`#undef memcmp`
29
30			`#ifdef _LIBC`
31
32			`# include <memcopy.h>`
33			`# include <endian.h>`
34
35			`# if __BYTE_ORDER == __BIG_ENDIAN`
36			`# define WORDS_BIGENDIAN`
37			`# endif`
38
39			`#else /* Not in the GNU C library. */`
40
41			`# include <sys/types.h>`
42
43			`/* Type to use for aligned memory operations.`
44			`This should normally be the biggest type supported by a single load`
45			`and store. Must be an unsigned type. */`
46			`# define op_t unsigned long int`
47			`# define OPSIZ (sizeof(op_t))`
48
49			`/* Threshold value for when to enter the unrolled loops. */`
50			`# define OP_T_THRES 16`
51
52			`/* Type to use for unaligned operations. */`
53			`typedef unsigned char byte;`
54
55			`# ifndef WORDS_BIGENDIAN`
56			`# define MERGE(w0, sh_1, w1, sh_2) (((w0) >> (sh_1)) \| ((w1) << (sh_2)))`
57			`# else`
58			`# define MERGE(w0, sh_1, w1, sh_2) (((w0) << (sh_1)) \| ((w1) >> (sh_2)))`
59			`# endif`
60
61			`#endif /* In the GNU C library. */`
62
63			`#ifdef WORDS_BIGENDIAN`
64			`# define CMP_LT_OR_GT(a, b) ((a) > (b) ? 1 : -1)`
65			`#else`
66			`# define CMP_LT_OR_GT(a, b) memcmp_bytes ((a), (b))`
67			`#endif`
68
69			`/* BE VERY CAREFUL IF YOU CHANGE THIS CODE! */`
70
71			`/* The strategy of this memcmp is:`
72
73			`1. Compare bytes until one of the block pointers is aligned.`
74
75			`2. Compare using memcmp_common_alignment or`
76			`memcmp_not_common_alignment, regarding the alignment of the other`
77			`block after the initial byte operations. The maximum number of`
78			`full words (of type op_t) are compared in this way.`
79
80			`3. Compare the few remaining bytes. */`
81
82			`#ifndef WORDS_BIGENDIAN`
83			`/* memcmp_bytes -- Compare A and B bytewise in the byte order of the machine.`
84			`A and B are known to be different.`
85			`This is needed only on little-endian machines. */`
86
87			`# ifdef __GNUC__`
88			`__inline`
89			`# endif`
90			`static int`
91			`memcmp_bytes (long unsigned int a, long unsigned int b)`
92			`{`
93			`long int srcp1 = (long int) &a;`
94			`long int srcp2 = (long int) &b;`
95			`op_t a0, b0;`
96
97			`do`
98			`{`
99			`a0 = ((byte *) srcp1)[0];`
100			`b0 = ((byte *) srcp2)[0];`
101			`srcp1 += 1;`
102			`srcp2 += 1;`
103			`}`
104			`while (a0 == b0);`
105			`return a0 - b0;`
106			`}`
107			`#endif`
108
109			/* memcmp_common_alignment -- Compare blocks at SRCP1 and SRCP2 with LEN `op_t'
110			`objects (not LEN bytes!). Both SRCP1 and SRCP2 should be aligned for`
111			memory operations on `op_t's. */
112			`#ifdef __GNUC__`
113			`__inline`
114			`#endif`
115			`static int`
116			`memcmp_common_alignment (long int srcp1, long int srcp2, size_t len)`
117			`{`
118			`op_t a0, a1;`
119			`op_t b0, b1;`
120
121			`switch (len % 4)`
122			`{`
123			`default: /* Avoid warning about uninitialized local variables. */`
124			`case 2:`
125			`a0 = ((op_t *) srcp1)[0];`
126			`b0 = ((op_t *) srcp2)[0];`
127			`srcp1 -= 2 * OPSIZ;`
128			`srcp2 -= 2 * OPSIZ;`
129			`len += 2;`
130			`goto do1;`
131			`case 3:`
132			`a1 = ((op_t *) srcp1)[0];`
133			`b1 = ((op_t *) srcp2)[0];`
134			`srcp1 -= OPSIZ;`
135			`srcp2 -= OPSIZ;`
136			`len += 1;`
137			`goto do2;`
138			`case 0:`
139			`if (OP_T_THRES <= 3 * OPSIZ && len == 0)`
140			`return 0;`
141			`a0 = ((op_t *) srcp1)[0];`
142			`b0 = ((op_t *) srcp2)[0];`
143			`goto do3;`
144			`case 1:`
145			`a1 = ((op_t *) srcp1)[0];`
146			`b1 = ((op_t *) srcp2)[0];`
147			`srcp1 += OPSIZ;`
148			`srcp2 += OPSIZ;`
149			`len -= 1;`
150			`if (OP_T_THRES <= 3 * OPSIZ && len == 0)`
151			`goto do0;`
152			`/* Fall through. */`
153			`}`
154
155			`do`
156			`{`
157			`a0 = ((op_t *) srcp1)[0];`
158			`b0 = ((op_t *) srcp2)[0];`
159			`if (a1 != b1)`
160			`return CMP_LT_OR_GT (a1, b1);`
161
162			`do3:`
163			`a1 = ((op_t *) srcp1)[1];`
164			`b1 = ((op_t *) srcp2)[1];`
165			`if (a0 != b0)`
166			`return CMP_LT_OR_GT (a0, b0);`
167
168			`do2:`
169			`a0 = ((op_t *) srcp1)[2];`
170			`b0 = ((op_t *) srcp2)[2];`
171			`if (a1 != b1)`
172			`return CMP_LT_OR_GT (a1, b1);`
173
174			`do1:`
175			`a1 = ((op_t *) srcp1)[3];`
176			`b1 = ((op_t *) srcp2)[3];`
177			`if (a0 != b0)`
178			`return CMP_LT_OR_GT (a0, b0);`
179
180			`srcp1 += 4 * OPSIZ;`
181			`srcp2 += 4 * OPSIZ;`
182			`len -= 4;`
183			`}`
184			`while (len != 0);`
185
186			`/* This is the right position for do0. Please don't move`
187			`it into the loop. */`
188			`do0:`
189			`if (a1 != b1)`
190			`return CMP_LT_OR_GT (a1, b1);`
191			`return 0;`
192			`}`
193
194			`/* memcmp_not_common_alignment -- Compare blocks at SRCP1 and SRCP2 with LEN`
195			`op_t' objects (not LEN bytes!). SRCP2 should be aligned for memory
196			operations on `op_t', but SRCP1 should be unaligned. */
197			`#ifdef __GNUC__`
198			`__inline`
199			`#endif`
200			`static int`
201			`memcmp_not_common_alignment (long int srcp1, long int srcp2, size_t len)`
202			`{`
203			`op_t a0, a1, a2, a3;`
204			`op_t b0, b1, b2, b3;`
205			`op_t x;`
206			`int shl, shr;`
207
208			`/* Calculate how to shift a word read at the memory operation`
209			`aligned srcp1 to make it aligned for comparison. */`
210
211			`shl = 8 * (srcp1 % OPSIZ);`
212			`shr = 8 * OPSIZ - shl;`
213
214			/* Make SRCP1 aligned by rounding it down to the beginning of the `op_t'
215			`it points in the middle of. */`
216			`srcp1 &= -OPSIZ;`
217
218			`switch (len % 4)`
219			`{`
220			`default: /* Avoid warning about uninitialized local variables. */`
221			`case 2:`
222			`a1 = ((op_t *) srcp1)[0];`
223			`a2 = ((op_t *) srcp1)[1];`
224			`b2 = ((op_t *) srcp2)[0];`
225			`srcp1 -= 1 * OPSIZ;`
226			`srcp2 -= 2 * OPSIZ;`
227			`len += 2;`
228			`goto do1;`
229			`case 3:`
230			`a0 = ((op_t *) srcp1)[0];`
231			`a1 = ((op_t *) srcp1)[1];`
232			`b1 = ((op_t *) srcp2)[0];`
233			`srcp2 -= 1 * OPSIZ;`
234			`len += 1;`
235			`goto do2;`
236			`case 0:`
237			`if (OP_T_THRES <= 3 * OPSIZ && len == 0)`
238			`return 0;`
239			`a3 = ((op_t *) srcp1)[0];`
240			`a0 = ((op_t *) srcp1)[1];`
241			`b0 = ((op_t *) srcp2)[0];`
242			`srcp1 += 1 * OPSIZ;`
243			`goto do3;`
244			`case 1:`
245			`a2 = ((op_t *) srcp1)[0];`
246			`a3 = ((op_t *) srcp1)[1];`
247			`b3 = ((op_t *) srcp2)[0];`
248			`srcp1 += 2 * OPSIZ;`
249			`srcp2 += 1 * OPSIZ;`
250			`len -= 1;`
251			`if (OP_T_THRES <= 3 * OPSIZ && len == 0)`
252			`goto do0;`
253			`/* Fall through. */`
254			`}`
255
256			`do`
257			`{`
258			`a0 = ((op_t *) srcp1)[0];`
259			`b0 = ((op_t *) srcp2)[0];`
260			`x = MERGE(a2, shl, a3, shr);`
261			`if (x != b3)`
262			`return CMP_LT_OR_GT (x, b3);`
263
264			`do3:`
265			`a1 = ((op_t *) srcp1)[1];`
266			`b1 = ((op_t *) srcp2)[1];`
267			`x = MERGE(a3, shl, a0, shr);`
268			`if (x != b0)`
269			`return CMP_LT_OR_GT (x, b0);`
270
271			`do2:`
272			`a2 = ((op_t *) srcp1)[2];`
273			`b2 = ((op_t *) srcp2)[2];`
274			`x = MERGE(a0, shl, a1, shr);`
275			`if (x != b1)`
276			`return CMP_LT_OR_GT (x, b1);`
277
278			`do1:`
279			`a3 = ((op_t *) srcp1)[3];`
280			`b3 = ((op_t *) srcp2)[3];`
281			`x = MERGE(a1, shl, a2, shr);`
282			`if (x != b2)`
283			`return CMP_LT_OR_GT (x, b2);`
284
285			`srcp1 += 4 * OPSIZ;`
286			`srcp2 += 4 * OPSIZ;`
287			`len -= 4;`
288			`}`
289			`while (len != 0);`
290
291			`/* This is the right position for do0. Please don't move`
292			`it into the loop. */`
293			`do0:`
294			`x = MERGE(a2, shl, a3, shr);`
295			`if (x != b3)`
296			`return CMP_LT_OR_GT (x, b3);`
297			`return 0;`
298			`}`
299
300			`int`
301			`rpl_memcmp (const void s1, const void s2, size_t len)`
302			`{`
303			`op_t a0;`
304			`op_t b0;`
305			`long int srcp1 = (long int) s1;`
306			`long int srcp2 = (long int) s2;`
307			`op_t res;`
308
309			`if (len >= OP_T_THRES)`
310			`{`
311			`/* There are at least some bytes to compare. No need to test`
312			`for LEN == 0 in this alignment loop. */`
313			`while (srcp2 % OPSIZ != 0)`
314			`{`
315			`a0 = ((byte *) srcp1)[0];`
316			`b0 = ((byte *) srcp2)[0];`
317			`srcp1 += 1;`
318			`srcp2 += 1;`
319			`res = a0 - b0;`
320			`if (res != 0)`
321			`return res;`
322			`len -= 1;`
323			`}`
324
325			/* SRCP2 is now aligned for memory operations on `op_t'.
326			`SRCP1 alignment determines if we can do a simple,`
327			`aligned compare or need to shuffle bits. */`
328
329			`if (srcp1 % OPSIZ == 0)`
330			`res = memcmp_common_alignment (srcp1, srcp2, len / OPSIZ);`
331			`else`
332			`res = memcmp_not_common_alignment (srcp1, srcp2, len / OPSIZ);`
333			`if (res != 0)`
334			`return res;`
335
336			`/* Number of bytes remaining in the interval [0..OPSIZ-1]. */`
337			`srcp1 += len & -OPSIZ;`
338			`srcp2 += len & -OPSIZ;`
339			`len %= OPSIZ;`
340			`}`
341
342			`/* There are just a few bytes to compare. Use byte memory operations. */`
343			`while (len != 0)`
344			`{`
345			`a0 = ((byte *) srcp1)[0];`
346			`b0 = ((byte *) srcp2)[0];`
347			`srcp1 += 1;`
348			`srcp2 += 1;`
349			`res = a0 - b0;`
350			`if (res != 0)`
351			`return res;`
352			`len -= 1;`
353			`}`
354
355			`return 0;`
356			`}`
357
358			`#ifdef weak_alias`
359			`# undef bcmp`
360			`weak_alias (memcmp, bcmp)`
361			`#endif`