Subversion Repositories openrisc

/* Native-dependent code for the i386.

   Copyright (C) 2001, 2004, 2005, 2007, 2008, 2009, 2010

   Free Software Foundation, Inc.

   This file is part of GDB.

   This program is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 3 of the License, or

   (at your option) any later version.

   This program is distributed in the hope that it will be useful,

   but WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License

   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */

#include "i386-nat.h"

#include "defs.h"

#include "breakpoint.h"

#include "command.h"

#include "gdbcmd.h"

#include "target.h"

#include "gdb_assert.h"

/* Support for hardware watchpoints and breakpoints using the i386

   debug registers.

   This provides several functions for inserting and removing

   hardware-assisted breakpoints and watchpoints, testing if one or

   more of the watchpoints triggered and at what address, checking

   whether a given region can be watched, etc.

   The functions below implement debug registers sharing by reference

   counts, and allow to watch regions up to 16 bytes long.  */

struct i386_dr_low_type i386_dr_low;

/* Support for 8-byte wide hw watchpoints.  */

#define TARGET_HAS_DR_LEN_8 (i386_dr_low.debug_register_length == 8)

/* Debug registers' indices.  */

#define DR_NADDR        4       /* The number of debug address registers.  */

#define DR_STATUS       6       /* Index of debug status register (DR6).  */

#define DR_CONTROL      7       /* Index of debug control register (DR7). */

/* DR7 Debug Control register fields.  */

/* How many bits to skip in DR7 to get to R/W and LEN fields.  */

#define DR_CONTROL_SHIFT        16

/* How many bits in DR7 per R/W and LEN field for each watchpoint.  */

#define DR_CONTROL_SIZE         4

/* Watchpoint/breakpoint read/write fields in DR7.  */

#define DR_RW_EXECUTE   (0x0)   /* Break on instruction execution.  */

#define DR_RW_WRITE     (0x1)   /* Break on data writes.  */

#define DR_RW_READ      (0x3)   /* Break on data reads or writes.  */

/* This is here for completeness.  No platform supports this

   functionality yet (as of March 2001).  Note that the DE flag in the

   CR4 register needs to be set to support this.  */

#ifndef DR_RW_IORW

#define DR_RW_IORW      (0x2)   /* Break on I/O reads or writes.  */

#endif

/* Watchpoint/breakpoint length fields in DR7.  The 2-bit left shift

   is so we could OR this with the read/write field defined above.  */

#define DR_LEN_1        (0x0 << 2) /* 1-byte region watch or breakpoint.  */

#define DR_LEN_2        (0x1 << 2) /* 2-byte region watch.  */

#define DR_LEN_4        (0x3 << 2) /* 4-byte region watch.  */

#define DR_LEN_8        (0x2 << 2) /* 8-byte region watch (AMD64).  */

/* Local and Global Enable flags in DR7.

   When the Local Enable flag is set, the breakpoint/watchpoint is

   enabled only for the current task; the processor automatically

   clears this flag on every task switch.  When the Global Enable flag

   is set, the breakpoint/watchpoint is enabled for all tasks; the

   processor never clears this flag.

   Currently, all watchpoint are locally enabled.  If you need to

   enable them globally, read the comment which pertains to this in

   i386_insert_aligned_watchpoint below.  */

#define DR_LOCAL_ENABLE_SHIFT   0 /* Extra shift to the local enable bit.  */

#define DR_GLOBAL_ENABLE_SHIFT  1 /* Extra shift to the global enable bit.  */

#define DR_ENABLE_SIZE          2 /* Two enable bits per debug register.  */

/* Local and global exact breakpoint enable flags (a.k.a. slowdown

   flags).  These are only required on i386, to allow detection of the

   exact instruction which caused a watchpoint to break; i486 and

   later processors do that automatically.  We set these flags for

   backwards compatibility.  */

#define DR_LOCAL_SLOWDOWN       (0x100)

#define DR_GLOBAL_SLOWDOWN      (0x200)

/* Fields reserved by Intel.  This includes the GD (General Detect

   Enable) flag, which causes a debug exception to be generated when a

   MOV instruction accesses one of the debug registers.

   FIXME: My Intel manual says we should use 0xF800, not 0xFC00.  */

#define DR_CONTROL_RESERVED     (0xFC00)

/* Auxiliary helper macros.  */

/* A value that masks all fields in DR7 that are reserved by Intel.  */

#define I386_DR_CONTROL_MASK    (~DR_CONTROL_RESERVED)

/* The I'th debug register is vacant if its Local and Global Enable

   bits are reset in the Debug Control register.  */

#define I386_DR_VACANT(i) \

  ((dr_control_mirror & (3 << (DR_ENABLE_SIZE * (i)))) == 0)

/* Locally enable the break/watchpoint in the I'th debug register.  */

#define I386_DR_LOCAL_ENABLE(i) \

  dr_control_mirror |= (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i)))

/* Globally enable the break/watchpoint in the I'th debug register.  */

#define I386_DR_GLOBAL_ENABLE(i) \

  dr_control_mirror |= (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i)))

/* Disable the break/watchpoint in the I'th debug register.  */

#define I386_DR_DISABLE(i) \

  dr_control_mirror &= ~(3 << (DR_ENABLE_SIZE * (i)))

/* Set in DR7 the RW and LEN fields for the I'th debug register.  */

#define I386_DR_SET_RW_LEN(i,rwlen) \

  do { \

    dr_control_mirror &= ~(0x0f << (DR_CONTROL_SHIFT+DR_CONTROL_SIZE*(i)));   \

    dr_control_mirror |= ((rwlen) << (DR_CONTROL_SHIFT+DR_CONTROL_SIZE*(i))); \

  } while (0)

/* Get from DR7 the RW and LEN fields for the I'th debug register.  */

#define I386_DR_GET_RW_LEN(i) \

  ((dr_control_mirror >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))) & 0x0f)

/* Mask that this I'th watchpoint has triggered.  */

#define I386_DR_WATCH_MASK(i)   (1 << (i))

/* Did the watchpoint whose address is in the I'th register break?  */

#define I386_DR_WATCH_HIT(i)    (dr_status_mirror & I386_DR_WATCH_MASK (i))

/* A macro to loop over all debug registers.  */

#define ALL_DEBUG_REGISTERS(i)  for (i = 0; i < DR_NADDR; i++)

/* Mirror the inferior's DRi registers.  We keep the status and

   control registers separated because they don't hold addresses.  */

static CORE_ADDR dr_mirror[DR_NADDR];

static unsigned long dr_status_mirror, dr_control_mirror;

/* Reference counts for each debug register.  */

static int dr_ref_count[DR_NADDR];

/* Whether or not to print the mirrored debug registers.  */

static int maint_show_dr;

/* Types of operations supported by i386_handle_nonaligned_watchpoint.  */

typedef enum { WP_INSERT, WP_REMOVE, WP_COUNT } i386_wp_op_t;

/* Internal functions.  */

/* Return the value of a 4-bit field for DR7 suitable for watching a

   region of LEN bytes for accesses of type TYPE.  LEN is assumed to

   have the value of 1, 2, or 4.  */

static unsigned i386_length_and_rw_bits (int len, enum target_hw_bp_type type);

/* Insert a watchpoint at address ADDR, which is assumed to be aligned

   according to the length of the region to watch.  LEN_RW_BITS is the

   value of the bit-field from DR7 which describes the length and

   access type of the region to be watched by this watchpoint.  Return

static int i386_insert_aligned_watchpoint (CORE_ADDR addr,

                                           unsigned len_rw_bits);

/* Remove a watchpoint at address ADDR, which is assumed to be aligned

   according to the length of the region to watch.  LEN_RW_BITS is the

   value of the bits from DR7 which describes the length and access

   type of the region watched by this watchpoint.  Return 0 on

   success, -1 on failure.  */

static int i386_remove_aligned_watchpoint (CORE_ADDR addr,

                                           unsigned len_rw_bits);

/* Insert or remove a (possibly non-aligned) watchpoint, or count the

   number of debug registers required to watch a region at address

   ADDR whose length is LEN for accesses of type TYPE.  Return 0 on

   successful insertion or removal, a positive number when queried

   about the number of registers, or -1 on failure.  If WHAT is not a

   valid value, bombs through internal_error.  */

static int i386_handle_nonaligned_watchpoint (i386_wp_op_t what,

                                              CORE_ADDR addr, int len,

                                              enum target_hw_bp_type type);

/* Implementation.  */

/* Clear the reference counts and forget everything we knew about the

   debug registers.  */

void

i386_cleanup_dregs (void)

{

  int i;

  ALL_DEBUG_REGISTERS(i)

    {

      dr_mirror[i] = 0;

      dr_ref_count[i] = 0;

    }

  dr_control_mirror = 0;

  dr_status_mirror  = 0;

}

/* Print the values of the mirrored debug registers.  This is called

   when maint_show_dr is non-zero.  To set that up, type "maint

   show-debug-regs" at GDB's prompt.  */

static void

i386_show_dr (const char *func, CORE_ADDR addr,

              int len, enum target_hw_bp_type type)

{

  int addr_size = gdbarch_addr_bit (target_gdbarch) / 8;

  int i;

  puts_unfiltered (func);

  if (addr || len)

    printf_unfiltered (" (addr=%lx, len=%d, type=%s)",

                       /* This code is for ia32, so casting CORE_ADDR

                          to unsigned long should be okay.  */

                       (unsigned long)addr, len,

                       type == hw_write ? "data-write"

                       : (type == hw_read ? "data-read"

                          : (type == hw_access ? "data-read/write"

                             : (type == hw_execute ? "instruction-execute"

                                /* FIXME: if/when I/O read/write

                                   watchpoints are supported, add them

                                   here.  */

                                : "??unknown??"))));

  puts_unfiltered (":\n");

  printf_unfiltered ("\tCONTROL (DR7): %s          STATUS (DR6): %s\n",

                     phex (dr_control_mirror, 8), phex (dr_status_mirror, 8));

  ALL_DEBUG_REGISTERS(i)

    {

      printf_unfiltered ("\

\tDR%d: addr=0x%s, ref.count=%d  DR%d: addr=0x%s, ref.count=%d\n",

                 i, phex (dr_mirror[i], addr_size), dr_ref_count[i],

                 i+1, phex (dr_mirror[i+1], addr_size), dr_ref_count[i+1]);

      i++;

    }

}

/* Return the value of a 4-bit field for DR7 suitable for watching a

   region of LEN bytes for accesses of type TYPE.  LEN is assumed to

   have the value of 1, 2, or 4.  */

static unsigned

i386_length_and_rw_bits (int len, enum target_hw_bp_type type)

{

  unsigned rw;

  switch (type)

    {

      case hw_execute:

        rw = DR_RW_EXECUTE;

        break;

      case hw_write:

        rw = DR_RW_WRITE;

        break;

      case hw_read:

        /* The i386 doesn't support data-read watchpoints.  */

      case hw_access:

        rw = DR_RW_READ;

        break;

#if 0

        /* Not yet supported.  */

      case hw_io_access:

        rw = DR_RW_IORW;

        break;

#endif

      default:

        internal_error (__FILE__, __LINE__, _("\

Invalid hardware breakpoint type %d in i386_length_and_rw_bits.\n"),

                        (int) type);

    }

  switch (len)

    {

      case 1:

        return (DR_LEN_1 | rw);

      case 2:

        return (DR_LEN_2 | rw);

      case 4:

        return (DR_LEN_4 | rw);

      case 8:

        if (TARGET_HAS_DR_LEN_8)

          return (DR_LEN_8 | rw);

      default:

        internal_error (__FILE__, __LINE__, _("\

Invalid hardware breakpoint length %d in i386_length_and_rw_bits.\n"), len);

    }

}

/* Insert a watchpoint at address ADDR, which is assumed to be aligned

   according to the length of the region to watch.  LEN_RW_BITS is the

   value of the bits from DR7 which describes the length and access

   type of the region to be watched by this watchpoint.  Return 0 on

   success, -1 on failure.  */

static int

i386_insert_aligned_watchpoint (CORE_ADDR addr, unsigned len_rw_bits)

{

  int i;

  if (!i386_dr_low.set_addr || !i386_dr_low.set_control)

    return -1;

  /* First, look for an occupied debug register with the same address

     and the same RW and LEN definitions.  If we find one, we can

     reuse it for this watchpoint as well (and save a register).  */

  ALL_DEBUG_REGISTERS(i)

    {

      if (!I386_DR_VACANT (i)

          && dr_mirror[i] == addr

          && I386_DR_GET_RW_LEN (i) == len_rw_bits)

        {

          dr_ref_count[i]++;

          return 0;

        }

    }

  /* Next, look for a vacant debug register.  */

  ALL_DEBUG_REGISTERS(i)

    {

      if (I386_DR_VACANT (i))

        break;

    }

  /* No more debug registers!  */

  if (i >= DR_NADDR)

    return -1;

  /* Now set up the register I to watch our region.  */

  /* Record the info in our local mirrored array.  */

  dr_mirror[i] = addr;

  dr_ref_count[i] = 1;

  I386_DR_SET_RW_LEN (i, len_rw_bits);

  /* Note: we only enable the watchpoint locally, i.e. in the current

     task.  Currently, no i386 target allows or supports global

     watchpoints; however, if any target would want that in the

     future, GDB should probably provide a command to control whether

     to enable watchpoints globally or locally, and the code below

     should use global or local enable and slow-down flags as

     appropriate.  */

  I386_DR_LOCAL_ENABLE (i);

  dr_control_mirror |= DR_LOCAL_SLOWDOWN;

  dr_control_mirror &= I386_DR_CONTROL_MASK;

  /* Finally, actually pass the info to the inferior.  */

  i386_dr_low.set_addr (i, addr);

  i386_dr_low.set_control (dr_control_mirror);

  /* Only a sanity check for leftover bits (set possibly only by inferior).  */

  if (i386_dr_low.unset_status)

    i386_dr_low.unset_status (I386_DR_WATCH_MASK (i));

  return 0;

}

/* Remove a watchpoint at address ADDR, which is assumed to be aligned

   according to the length of the region to watch.  LEN_RW_BITS is the

   value of the bits from DR7 which describes the length and access

   type of the region watched by this watchpoint.  Return 0 on

   success, -1 on failure.  */

static int

i386_remove_aligned_watchpoint (CORE_ADDR addr, unsigned len_rw_bits)

{

  int i, retval = -1;

  ALL_DEBUG_REGISTERS(i)

    {

      if (!I386_DR_VACANT (i)

          && dr_mirror[i] == addr

          && I386_DR_GET_RW_LEN (i) == len_rw_bits)

        {

          if (--dr_ref_count[i] == 0) /* no longer in use? */

            {

              /* Reset our mirror.  */

              dr_mirror[i] = 0;

              I386_DR_DISABLE (i);

              /* Reset it in the inferior.  */

              i386_dr_low.set_control (dr_control_mirror);

              if (i386_dr_low.reset_addr)

                i386_dr_low.reset_addr (i);

            }

          retval = 0;

        }

    }

  return retval;

}

/* Insert or remove a (possibly non-aligned) watchpoint, or count the

   number of debug registers required to watch a region at address

   ADDR whose length is LEN for accesses of type TYPE.  Return 0 on

   successful insertion or removal, a positive number when queried

   about the number of registers, or -1 on failure.  If WHAT is not a

   valid value, bombs through internal_error.  */

static int

i386_handle_nonaligned_watchpoint (i386_wp_op_t what, CORE_ADDR addr, int len,

                                   enum target_hw_bp_type type)

{

  int retval = 0, status = 0;

  int max_wp_len = TARGET_HAS_DR_LEN_8 ? 8 : 4;

  static int size_try_array[8][8] =

  {

    {1, 1, 1, 1, 1, 1, 1, 1},   /* Trying size one.  */

    {2, 1, 2, 1, 2, 1, 2, 1},   /* Trying size two.  */

    {2, 1, 2, 1, 2, 1, 2, 1},   /* Trying size three.  */

    {4, 1, 2, 1, 4, 1, 2, 1},   /* Trying size four.  */

    {4, 1, 2, 1, 4, 1, 2, 1},   /* Trying size five.  */

    {4, 1, 2, 1, 4, 1, 2, 1},   /* Trying size six.  */

    {4, 1, 2, 1, 4, 1, 2, 1},   /* Trying size seven.  */

    {8, 1, 2, 1, 4, 1, 2, 1},   /* Trying size eight.  */

  };

  while (len > 0)

    {

      int align = addr % max_wp_len;

      /* Four (eight on AMD64) is the maximum length a debug register

         can watch.  */

      int try = (len > max_wp_len ? (max_wp_len - 1) : len - 1);

      int size = size_try_array[try][align];

      if (what == WP_COUNT)

        {

          /* size_try_array[] is defined such that each iteration

             through the loop is guaranteed to produce an address and a

             size that can be watched with a single debug register.

             Thus, for counting the registers required to watch a

             region, we simply need to increment the count on each

             iteration.  */

          retval++;

        }

      else

        {

          unsigned len_rw = i386_length_and_rw_bits (size, type);

          if (what == WP_INSERT)

            status = i386_insert_aligned_watchpoint (addr, len_rw);

          else if (what == WP_REMOVE)

            status = i386_remove_aligned_watchpoint (addr, len_rw);

          else

            internal_error (__FILE__, __LINE__, _("\

Invalid value %d of operation in i386_handle_nonaligned_watchpoint.\n"),

                            (int)what);

          /* We keep the loop going even after a failure, because some

             of the other aligned watchpoints might still succeed

             (e.g. if they watch addresses that are already watched,

             in which case we just increment the reference counts of

             occupied debug registers).  If we break out of the loop

             too early, we could cause those addresses watched by

             other watchpoints to be disabled when breakpoint.c reacts

             to our failure to insert this watchpoint and tries to

             remove it.  */

          if (status)

            retval = status;

        }

      addr += size;

      len -= size;

    }

  return retval;

}

/* Insert a watchpoint to watch a memory region which starts at

   address ADDR and whose length is LEN bytes.  Watch memory accesses

   of the type TYPE.  Return 0 on success, -1 on failure.  */

static int

i386_insert_watchpoint (CORE_ADDR addr, int len, int type)

{

  int retval;

  if (((len != 1 && len !=2 && len !=4) && !(TARGET_HAS_DR_LEN_8 && len == 8))

      || addr % len != 0)

    retval = i386_handle_nonaligned_watchpoint (WP_INSERT, addr, len, type);

  else

    {

      unsigned len_rw = i386_length_and_rw_bits (len, type);

      retval = i386_insert_aligned_watchpoint (addr, len_rw);

    }

  if (maint_show_dr)

    i386_show_dr ("insert_watchpoint", addr, len, type);

  return retval;

}

/* Remove a watchpoint that watched the memory region which starts at

   address ADDR, whose length is LEN bytes, and for accesses of the

   type TYPE.  Return 0 on success, -1 on failure.  */

static int

i386_remove_watchpoint (CORE_ADDR addr, int len, int type)

{

  int retval;

  if (((len != 1 && len !=2 && len !=4) && !(TARGET_HAS_DR_LEN_8 && len == 8))

      || addr % len != 0)

    retval = i386_handle_nonaligned_watchpoint (WP_REMOVE, addr, len, type);

  else

    {

      unsigned len_rw = i386_length_and_rw_bits (len, type);

      retval = i386_remove_aligned_watchpoint (addr, len_rw);

    }

  if (maint_show_dr)

    i386_show_dr ("remove_watchpoint", addr, len, type);

  return retval;

}

/* Return non-zero if we can watch a memory region that starts at

   address ADDR and whose length is LEN bytes.  */

static int

i386_region_ok_for_watchpoint (CORE_ADDR addr, int len)

{

  int nregs;

  /* Compute how many aligned watchpoints we would need to cover this

     region.  */

  nregs = i386_handle_nonaligned_watchpoint (WP_COUNT, addr, len, hw_write);

  return nregs <= DR_NADDR ? 1 : 0;

}

/* If the inferior has some watchpoint that triggered, set the

   address associated with that watchpoint and return non-zero.

   Otherwise, return zero.  */

static int

i386_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p)

{

  CORE_ADDR addr = 0;

  int i;

  int rc = 0;

  dr_status_mirror = i386_dr_low.get_status ();

  ALL_DEBUG_REGISTERS(i)

    {

      if (I386_DR_WATCH_HIT (i)

          /* This second condition makes sure DRi is set up for a data

             watchpoint, not a hardware breakpoint.  The reason is

             that GDB doesn't call the target_stopped_data_address

             method except for data watchpoints.  In other words, I'm

             being paranoiac.  */

          && I386_DR_GET_RW_LEN (i) != 0

          /* This third condition makes sure DRi is not vacant, this

             avoids false positives in windows-nat.c.  */

          && !I386_DR_VACANT (i))

        {

          addr = dr_mirror[i];

          rc = 1;

          if (maint_show_dr)

            i386_show_dr ("watchpoint_hit", addr, -1, hw_write);

        }

    }

  if (maint_show_dr && addr == 0)

    i386_show_dr ("stopped_data_addr", 0, 0, hw_write);

  if (rc)

    *addr_p = addr;

  return rc;

}

static int

i386_stopped_by_watchpoint (void)

{

  CORE_ADDR addr = 0;

  return i386_stopped_data_address (&current_target, &addr);

}

/* Insert a hardware-assisted breakpoint at BP_TGT->placed_address.

   Return 0 on success, EBUSY on failure.  */

static int

i386_insert_hw_breakpoint (struct gdbarch *gdbarch,

                           struct bp_target_info *bp_tgt)

{

  unsigned len_rw = i386_length_and_rw_bits (1, hw_execute);

  CORE_ADDR addr = bp_tgt->placed_address;

  int retval = i386_insert_aligned_watchpoint (addr, len_rw) ? EBUSY : 0;

  if (maint_show_dr)

    i386_show_dr ("insert_hwbp", addr, 1, hw_execute);

  return retval;

}

/* Remove a hardware-assisted breakpoint at BP_TGT->placed_address.

   Return 0 on success, -1 on failure.  */

static int

i386_remove_hw_breakpoint (struct gdbarch *gdbarch,

                           struct bp_target_info *bp_tgt)

{

  unsigned len_rw = i386_length_and_rw_bits (1, hw_execute);

  CORE_ADDR addr = bp_tgt->placed_address;

  int retval = i386_remove_aligned_watchpoint (addr, len_rw);

  if (maint_show_dr)

    i386_show_dr ("remove_hwbp", addr, 1, hw_execute);

  return retval;

}

/* Returns the number of hardware watchpoints of type TYPE that we can

   set.  Value is positive if we can set CNT watchpoints, zero if

   setting watchpoints of type TYPE is not supported, and negative if

   CNT is more than the maximum number of watchpoints of type TYPE

   that we can support.  TYPE is one of bp_hardware_watchpoint,

   bp_read_watchpoint, bp_write_watchpoint, or bp_hardware_breakpoint.

   CNT is the number of such watchpoints used so far (including this

   one).  OTHERTYPE is non-zero if other types of watchpoints are

   currently enabled.

   We always return 1 here because we don't have enough information

   about possible overlap of addresses that they want to watch.  As an

   extreme example, consider the case where all the watchpoints watch

   the same address and the same region length: then we can handle a

   virtually unlimited number of watchpoints, due to debug register

   sharing implemented via reference counts in i386-nat.c.  */

static int

i386_can_use_hw_breakpoint (int type, int cnt, int othertype)

{

  return 1;

}

static void

add_show_debug_regs_command (void)

{

  /* A maintenance command to enable printing the internal DRi mirror

     variables.  */

  add_setshow_boolean_cmd ("show-debug-regs", class_maintenance,

                           &maint_show_dr, _("\

Set whether to show variables that mirror the x86 debug registers."), _("\

Show whether to show variables that mirror the x86 debug registers."), _("\

Use \"on\" to enable, \"off\" to disable.\n\

If enabled, the debug registers values are shown when GDB inserts\n\

or removes a hardware breakpoint or watchpoint, and when the inferior\n\

triggers a breakpoint or watchpoint."),

                           NULL,

                           NULL,

                           &maintenance_set_cmdlist,

                           &maintenance_show_cmdlist);

}

/* There are only two global functions left.  */

void

i386_use_watchpoints (struct target_ops *t)

{

  /* After a watchpoint trap, the PC points to the instruction after the

     one that caused the trap.  Therefore we don't need to step over it.

     But we do need to reset the status register to avoid another trap.  */

  t->to_have_continuable_watchpoint = 1;

  t->to_can_use_hw_breakpoint = i386_can_use_hw_breakpoint;

  t->to_region_ok_for_hw_watchpoint = i386_region_ok_for_watchpoint;

  t->to_stopped_by_watchpoint = i386_stopped_by_watchpoint;

  t->to_stopped_data_address = i386_stopped_data_address;

  t->to_insert_watchpoint = i386_insert_watchpoint;

  t->to_remove_watchpoint = i386_remove_watchpoint;

  t->to_insert_hw_breakpoint = i386_insert_hw_breakpoint;

  t->to_remove_hw_breakpoint = i386_remove_hw_breakpoint;

}

void

i386_set_debug_register_length (int len)

{

  /* This function should be called only once for each native target.  */

  gdb_assert (i386_dr_low.debug_register_length == 0);

  gdb_assert (len == 4 || len == 8);

  i386_dr_low.debug_register_length = len;

  add_show_debug_regs_command ();

}