OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-7.1/] [gdb/] [monitor.h] - Blame information for rev 842

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 227 jeremybenn
/* Definitions for remote debugging interface for ROM monitors.
2
   Copyright (C) 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
3
   2007, 2008, 2009, 2010 Free Software Foundation, Inc.
4
   Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
5
 
6
   This file is part of GDB.
7
 
8
   This program is free software; you can redistribute it and/or modify
9
   it under the terms of the GNU General Public License as published by
10
   the Free Software Foundation; either version 3 of the License, or
11
   (at your option) any later version.
12
 
13
   This program is distributed in the hope that it will be useful,
14
   but WITHOUT ANY WARRANTY; without even the implied warranty of
15
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16
   GNU General Public License for more details.
17
 
18
   You should have received a copy of the GNU General Public License
19
   along with this program.  If not, see <http://www.gnu.org/licenses/>.
20
 */
21
 
22
#ifndef MONITOR_H
23
#define MONITOR_H
24
 
25
struct target_waitstatus;
26
struct serial;
27
 
28
/* This structure describes the strings necessary to give small command
29
   sequences to the monitor, and parse the response.
30
 
31
   CMD is the actual command typed at the monitor.  Usually this has
32
   embedded sequences ala printf, which are substituted with the
33
   arguments appropriate to that type of command.  Ie: to examine a
34
   register, we substitute the register name for the first arg.  To
35
   modify memory, we substitute the memory location and the new
36
   contents for the first and second args, etc...
37
 
38
   RESP_DELIM used to home in on the response string, and is used to
39
   disambiguate the answer within the pile of text returned by the
40
   monitor.  This should be a unique string that immediately precedes
41
   the answer.  Ie: if your monitor prints out `PC: 00000001= ' in
42
   response to asking for the PC, you should use `: ' as the
43
   RESP_DELIM.  RESP_DELIM may be NULL if the res- ponse is going to
44
   be ignored, or has no particular leading text.
45
 
46
   TERM is the string that the monitor outputs to indicate that it is
47
   idle, and waiting for input.  This is usually a prompt of some
48
   sort.  In the previous example, it would be `= '.  It is important
49
   that TERM really means that the monitor is idle, otherwise GDB may
50
   try to type at it when it isn't ready for input.  This is a problem
51
   because many monitors cannot deal with type-ahead.  TERM may be
52
   NULL if the normal prompt is output.
53
 
54
   TERM_CMD is used to quit out of the subcommand mode and get back to
55
   the main prompt.  TERM_CMD may be NULL if it isn't necessary.  It
56
   will also be ignored if TERM is NULL.  */
57
 
58
struct memrw_cmd
59
  {
60
    char *cmdb;                 /* Command to send for byte read/write */
61
    char *cmdw;                 /* Command for word (16 bit) read/write */
62
    char *cmdl;                 /* Command for long (32 bit) read/write */
63
    char *cmdll;                /* Command for long long (64 bit) read/write */
64
    char *resp_delim;           /* String just prior to the desired value */
65
    char *term;                 /* Terminating string to search for */
66
    char *term_cmd;             /* String to get out of sub-mode (if necessary) */
67
  };
68
 
69
struct regrw_cmd
70
  {
71
    char *cmd;                  /* Command to send for reg read/write */
72
    char *resp_delim;           /* String (actually a regexp if getmem) just
73
                                   prior to the desired value */
74
    char *term;                 /* Terminating string to search for */
75
    char *term_cmd;             /* String to get out of sub-mode (if necessary) */
76
  };
77
 
78
struct monitor_ops
79
  {
80
    int flags;                  /* See below */
81
    char **init;                /* List of init commands.  NULL terminated. */
82
    char *cont;                 /* continue command */
83
    char *step;                 /* single step */
84
    char *stop;                 /* Interrupt program string */
85
    char *set_break;            /* set a breakpoint. If NULL, monitor implementation
86
                                   sets its own to_insert_breakpoint method. */
87
    char *clr_break;            /* clear a breakpoint */
88
    char *clr_all_break;        /* Clear all breakpoints */
89
    char *fill;                 /* Memory fill cmd (addr len val) */
90
    struct memrw_cmd setmem;    /* set memory to a value */
91
    struct memrw_cmd getmem;    /* display memory */
92
    struct regrw_cmd setreg;    /* set a register */
93
    struct regrw_cmd getreg;    /* get a register */
94
    /* Some commands can dump a bunch of registers
95
       at once.  This comes as a set of REG=VAL
96
       pairs.  This should be called for each pair
97
       of registers that we can parse to supply
98
       GDB with the value of a register.  */
99
    char *dump_registers;       /* Command to dump all regs at once */
100
    char *register_pattern;     /* Pattern that picks out register from reg dump */
101
    void (*supply_register) (struct regcache *regcache, char *name,
102
                             int namelen, char *val, int vallen);
103
    void (*load_routine) (struct serial *desc, char *file,
104
                          int hashmark);        /* Download routine */
105
    int (*dumpregs) (struct regcache *);        /* Dump all registers */
106
    int (*continue_hook) (void);        /* Emit the continue command */
107
    int (*wait_filter) (char *buf,      /* Maybe contains registers */
108
                        int bufmax,
109
                        int *response_length,
110
                        struct target_waitstatus * status);
111
    char *load;                 /* load command */
112
    char *loadresp;             /* Response to load command */
113
    char *prompt;               /* monitor command prompt */
114
    char *line_term;            /* end-of-command delimitor */
115
    char *cmd_end;              /* optional command terminator */
116
    struct target_ops *target;  /* target operations */
117
    int stopbits;               /* number of stop bits */
118
    char **regnames;            /* array of register names in ascii */
119
                                /* deprecated: use regname instead */
120
    const char *(*regname) (int index);
121
                                /* function for dynamic regname array */
122
    int num_breakpoints;        /* If set_break != NULL, number of supported
123
                                   breakpoints */
124
    int magic;                  /* Check value */
125
  };
126
 
127
/* The monitor ops magic number, used to detect if an ops structure doesn't
128
   have the right number of entries filled in. */
129
 
130
#define MONITOR_OPS_MAGIC 600925
131
 
132
/* Flag definitions. */
133
 
134
/* If set, then clear breakpoint command uses address, otherwise it
135
   uses an index returned by the monitor.  */
136
 
137
#define MO_CLR_BREAK_USES_ADDR 0x1
138
 
139
/* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE
140
   as args, else it uses STARTADDR, LENGTH, VALUE as args. */
141
 
142
#define MO_FILL_USES_ADDR 0x2
143
 
144
/* If set, then monitor doesn't automatically supply register dump
145
   when coming back after a continue.  */
146
 
147
#define MO_NEED_REGDUMP_AFTER_CONT 0x4
148
 
149
/* getmem needs start addr and end addr */
150
 
151
#define MO_GETMEM_NEEDS_RANGE 0x8
152
 
153
/* getmem can only read one loc at a time */
154
 
155
#define MO_GETMEM_READ_SINGLE 0x10
156
 
157
/* handle \r\n combinations */
158
 
159
#define MO_HANDLE_NL 0x20
160
 
161
/* don't expect echos in monitor_open */
162
 
163
#define MO_NO_ECHO_ON_OPEN 0x40
164
 
165
/* If set, send break to stop monitor */
166
 
167
#define MO_SEND_BREAK_ON_STOP 0x80
168
 
169
/* If set, target sends an ACK after each S-record */
170
 
171
#define MO_SREC_ACK 0x100
172
 
173
/* Allow 0x prefix on addresses retured from monitor */
174
 
175
#define MO_HEX_PREFIX 0x200
176
 
177
/* Some monitors require a different command when starting a program */
178
 
179
#define MO_RUN_FIRST_TIME 0x400
180
 
181
/* Don't expect echos when getting memory */
182
 
183
#define MO_NO_ECHO_ON_SETMEM 0x800
184
 
185
/* If set, then register store command expects value BEFORE regname */
186
 
187
#define MO_REGISTER_VALUE_FIRST 0x1000
188
 
189
/* If set, then the monitor displays registers as pairs.  */
190
 
191
#define MO_32_REGS_PAIRED 0x2000
192
 
193
/* If set, then register setting happens interactively.  */
194
 
195
#define MO_SETREG_INTERACTIVE 0x4000
196
 
197
/* If set, then memory setting happens interactively.  */
198
 
199
#define MO_SETMEM_INTERACTIVE 0x8000
200
 
201
/* If set, then memory dumps are always on 16-byte boundaries, even
202
   when less is desired.  */
203
 
204
#define MO_GETMEM_16_BOUNDARY 0x10000
205
 
206
/* If set, then the monitor numbers its breakpoints starting from 1.  */
207
 
208
#define MO_CLR_BREAK_1_BASED 0x20000
209
 
210
/* If set, then the monitor acks srecords with a plus sign.  */
211
 
212
#define MO_SREC_ACK_PLUS 0x40000
213
 
214
/* If set, then the monitor "acks" srecords with rotating lines.  */
215
 
216
#define MO_SREC_ACK_ROTATE 0x80000
217
 
218
/* If set, then remove useless address bits from memory addresses.  */
219
 
220
#define MO_ADDR_BITS_REMOVE 0x100000
221
 
222
/* If set, then display target program output if prefixed by ^O.  */
223
 
224
#define MO_PRINT_PROGRAM_OUTPUT 0x200000
225
 
226
/* Some dump bytes commands align the first data with the preceeding
227
   16 byte boundary. Some print blanks and start at the exactly the
228
   requested boundary. */
229
 
230
#define MO_EXACT_DUMPADDR 0x400000
231
 
232
/* Rather entering and exiting the write memory dialog for each word byte,
233
   we can save time by transferring the whole block without exiting
234
   the memory editing mode. You only need to worry about this
235
   if you are doing memory downloading.
236
   This engages a new write function registered with dcache.
237
 */
238
#define MO_HAS_BLOCKWRITES 0x800000
239
 
240
#define SREC_SIZE 160
241
 
242
extern void monitor_open (char *args, struct monitor_ops *ops, int from_tty);
243
extern void monitor_close (int quitting);
244
extern char *monitor_supply_register (struct regcache *regcache,
245
                                      int regno, char *valstr);
246
extern int monitor_expect (char *prompt, char *buf, int buflen);
247
extern int monitor_expect_prompt (char *buf, int buflen);
248
/* Note: The variable argument functions monitor_printf and
249
   monitor_printf_noecho vararg do not take take standard format style
250
   arguments.  Instead they take custom formats interpretered directly
251
   by monitor_vsprintf.  */
252
extern void monitor_printf (char *, ...);
253
extern void monitor_printf_noecho (char *, ...);
254
extern void monitor_write (char *buf, int buflen);
255
extern int monitor_readchar (void);
256
extern char *monitor_get_dev_name (void);
257
extern void init_monitor_ops (struct target_ops *);
258
extern int monitor_dump_reg_block (struct regcache *regcache, char *dump_cmd);
259
 
260
#endif

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.