Subversion Repositories openrisc

# Copyright 1992, 1994, 1996, 1997, 1998, 2001, 2003, 2007, 2008, 2009, 2010

# Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 3 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program.  If not, see .

# This file was written by Michael Snyder (msnyder@cygnus.com)

if $tracelevel then {

        strace $tracelevel

}

set prms_id 0

set bug_id 0

set testfile "setshow"

set srcfile ${testfile}.c

set binfile ${objdir}/${subdir}/${testfile}

if { [gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile} executable {debug}] != "" } {

     untested setshow.exp

     return -1

}

# Start with a fresh gdb

gdb_exit

gdb_start

gdb_reinitialize_dir $srcdir/$subdir

gdb_load ${binfile}

# make sure $pc is sane, in case we're talking to a board.

if { ![runto_main] } {

    gdb_suppress_tests;

}

#

# Test gdb set and show commands.

# Add tests here for show and set that don't fit neatly elsewhere.

# FIXME: many rudimentary tests for set and show commands have been

#        added below, but most do nothing more than check that a

#        variable has been set successfully, ie. they do not test

#        whether setting the variable has had the desired effect.

#

#test default annotation_level is 0

gdb_test "show annotate" "Annotation_level is 0..*"  "default annotation_level is zero"

#test set annotate 2

send_gdb "set annotate 2\n"

gdb_expect {

        -re ".*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \

                                { pass "set annotate 2" }

        timeout                 { fail "(timeout) set annotate 2" }

    }

send_gdb "show annotate\n"

gdb_expect {

        -re ".*\032\032post-prompt.*Annotation_level is 2..*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \

                                { pass "show annotate (2)" }

        timeout                 { fail "(timeout) show annotate (2)" }

    }

#test annotation_level 2

send_gdb "info line 1\n"

gdb_expect {

        -re ".*\032\032post-prompt.*Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \

                                { pass "annotation_level 2" }

        timeout                 { fail "(timeout) annotation_level 2" }

    }

#test set annotate 1

gdb_test "set annotate 1" ".*post-prompt.*"  "set annotate 1"

gdb_test "show annotate" "Annotation_level is 1..*"  "show annotate (1)"

#test annotation_level 1

gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*"  "annotation_level 1"

#test set annotate 0

gdb_test "set annotate 0" "" "set annotate 0"

gdb_test "show annotate" "Annotation_level is 0..*"  "show annotate (0)"

#test annotation_level 0

gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*"  "annotation_level 0"

#test set args

gdb_test "set args foo bar blup baz bubble" "" "set args"

#test show args

gdb_test "show args" "Argument list to give program being debugged when it is started is \"foo bar blup baz bubble\"..*" "show args"

# Don't test if we can't pass args or if we're using a stub.

if { ![target_info exists use_gdb_stub] && ![target_info exists noargs] } {

    #test passing args

    gdb_test "cont" "Continuing.*" "continuing"

    delete_breakpoints

    gdb_test "run" "Starting program:.*foo bar blup baz bubble.*" "passing args"

}

#test set check range on

gdb_test "set check range on" "" "set check range on"

#test show check range on

gdb_test "show check range" "Range checking is \"on\"\..*" "show check range (on)"

#test set check range off with trailing space

gdb_test "set check range off " "" "set check range off"

#test show check range off

gdb_test "show check range" "Range checking is \"off\"\..*" "show check range (off)"

#test set check range auto

gdb_test "set check range auto" "" "set check range auto"

#test show check range auto

gdb_test "show check range" "Range checking is \"auto; currently .*" "show check range (auto)"

#test set check type on

gdb_test "set check type on" "" "set check type on"

#test show check type on

gdb_test "show check type" "Type checking is \"on\"..*" "show check type (on)"

#test set check type off with trailing space

gdb_test "set check type off " "" "set check type off"

#test show check type off

gdb_test "show check type" "Type checking is \"off\"..*" "show check type (off)"

#test set check type auto

gdb_test "set check type auto" "" "set check type auto"

#test show check type

gdb_test "show check type" "Type checking is \"auto; currently .*" "show check type (auto)"

#test set complaints 100

gdb_test "set complaints 100" "" "set complaints 100"

#test show complaints 100

gdb_test "show complaints" "Max number of complaints about incorrect symbols is 100..*" "show complaints (100)"

#test set complaints 0

gdb_test "set complaints 0" "" "set complaints 0"

#test show complaints 0

gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0..*" "show complaints (0)"

#test set confirm off

gdb_test "set confirm off" "" "set confirm off"

#test show confirm off

gdb_test "show confirm" "Whether to confirm potentially dangerous operations is off..*" "show confirm (off)"

#test set confirm on

gdb_test "set confirm on" "" "set confirm on"

#test show confirm on

gdb_test "show confirm" "Whether to confirm potentially dangerous operations is on..*" "show confirm (on)"

#test set editing off

gdb_test "set editing off" "" "set editing off"

#test show editing off

gdb_test "show editing" "Editing of command lines as they are typed is off..*" "show editing (off)"

#test set editing on

#gdb_test "set editing on" "" "set editing on"

#test show editing on

#gdb_test "show editing" "Editing of command lines as they are typed is on..*" "show editing (on)"

#test set environment FOOBARBAZ

gdb_test "set environment FOOBARBAZ = grbxgrbxgrbx" ""    "set environment FOOBARBAZ"

#test show environment FOOBARBAZ

gdb_test "show environment FOOBARBAZ" "FOOBARBAZ = grbxgrbxgrbx.*"  "show environment FOOBARBAZ"

#test set height 100

gdb_test "set height 100" "" "set height 100"

#test show height 100

gdb_test "show height" "Number of lines gdb thinks are in a page is 100..*" "show height"

# back to infinite height to avoid pagers

gdb_test "set height 0" "" ""

#test set history expansion on

gdb_test "set history expansion on" "" "set history expansion on"

#test show history expansion on

gdb_test "show history expansion on" "History expansion on command input is on.*" "show history expansion"

#test set history filename foobar.baz

gdb_test "set history filename foobar.baz" ""    "set history filename foobar.baz"

#test show history filename foobar.baz

gdb_test "show history filename" "The filename in which to record the command history is \"foobar.baz\"..*"  "show history filename (foobar.baz)"

#test set history save on

gdb_test "set history save on" "" "set history save on"

#test show history save on

gdb_test "show history save" "Saving of the history record on exit is on..*"  "show history save (on)"

#test set history size 100

gdb_test "set history size 100" "" "set history size 100"

#test show history size 100

gdb_test "show history size" "The size of the command history is 100..*" "show history size (100)"

#test set language asm

gdb_test "set language asm" "" "set language asm"

#test show language asm

gdb_test "show language" "The current source language is \"asm\"..*" "show language (asm)"

#test set language java, with a trailing space

gdb_test "set language java " "" "set language java"

#test show language java

gdb_test "show language" "The current source language is \"java\"..*" "show language (java)"

#test completion for set language.

gdb_test "complete set language min" "set language minimal" \

  "complete set language minimal"

#test set language auto

gdb_test "set language auto" "" "set language auto"

#test show language

gdb_test "show language" "The current source language is \"auto.*\"..*" "show language (auto)"

#test set listsize 100

gdb_test "set listsize 100" "" "set listsize 100"

#test show listsize 100

gdb_test "show listsize" "Number of source lines gdb will list by default is 100..*" "show listsize (100)"

if ![board_info target exists gdb_prompt] {

    #test set prompt (FooBarBaz)

    set newprompt "\\(FooBarBaz\\)"

    send_gdb "set prompt (FooBarBaz) \n"

    gdb_expect {

        -re "$newprompt $"      { pass "set prompt (FooBarBaz) " }

        timeout                 { fail "(timeout) set prompt (FooBarBaz) " }

    }

    #test show prompt (FooBarBaz)

    send_gdb "show prompt\n"

    gdb_expect {

        -re "Gdb's prompt is \"$newprompt \"..* $" \

                { pass "show prompt (FooBarBaz) " }

        timeout                 { fail "(timeout) show prompt (FooBarBaz) " }

    }

    #test set prompt (gdb)

    send_gdb "set prompt (gdb) \n"

    gdb_expect {

        -re "$gdb_prompt $"             { pass "set prompt (gdb) " }

        timeout                 { fail "(timeout) set prompt (gdb) " }

    }

}

#test set radix 11

gdb_test "set radix 11" "Unsupported output radix ``decimal 11''; output radix unchanged..*"  "set radix 11"

#test set radix 16

gdb_test "set radix 16" "Input and output radices now set to decimal 16, hex 10, octal 20..*"  "set radix 16"

#test show radix 16

gdb_test "show radix" "Input and output radices set to decimal 16, hex 10, octal 20..*"  "show radix (16)"

#test set radix 10

gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12..*"  "set radix 10"

#test show radix 10

gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12..*" "show radix (10)"

#test set width 90

gdb_test "set width 90" "" "set width 90"

#test show width 90

gdb_test "show width" "Number of characters gdb thinks are in a line is 90..*" "show width (90)"

#test set write on

# This is only supported on targets which use exec.o.

gdb_test "set write on" ""  "set write on"

#test show write on

# This is only supported on targets which use exec.o.

gdb_test "show write" "Writing into executable and core files is on..*" "show write (on)"

#test set symbol-reloading on

gdb_test "set symbol-reloading on" "" "set symbol-reloading on"

#test show symbol-reloading on

gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on..*" "show symbol-reloading (on)"

#test show user

gdb_test "show user" "" "show user"

#test set verbose on

gdb_test "set verbose on" "" "set verbose on"

#test show verbose on

gdb_test "show verbose" "Verbose printing of informational messages is on..*" "show verbose (on)"

#test set verbose off

gdb_test "set verbose off" "" "set verbose off"

#test show verbose off

gdb_test "show verbose" "Verbosity is off..*" "show verbose (off)"