URL https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-7.1/] [gdb/] [testsuite/] [lib/] [mi-support.exp] - Blame information for rev 816

Go to most recent revision | Details | Compare with Previous | View Log

# Copyright 1999, 2000, 2002, 2003, 2004, 2005, 2007, 2008, 2009, 2010
# Free Software Foundation, Inc.
 
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see .
 
# This file was based on a file written by Fred Fish. (fnf@cygnus.com)
 
# Test setup routines that work with the MI interpreter.
 
# The variable mi_gdb_prompt is a regexp which matches the gdb mi prompt.
# Set it if it is not already set.
global mi_gdb_prompt
if ![info exists mi_gdb_prompt] then {
    set mi_gdb_prompt "\[(\]gdb\[)\] \r\n"
}
 
global mi_inferior_spawn_id
global mi_inferior_tty_name
 
set MIFLAGS "-i=mi"
 
set thread_selected_re "=thread-selected,id=\"\[0-9+\]\"\r\n"
set library_loaded_re "=library-loaded\[^\n\]+\"\r\n"
 
#
# mi_gdb_exit -- exit the GDB, killing the target program if necessary
#
proc mi_gdb_exit {} {
    catch mi_uncatched_gdb_exit
}
 
proc mi_uncatched_gdb_exit {} {
    global GDB
    global INTERNAL_GDBFLAGS GDBFLAGS
    global verbose
    global gdb_spawn_id;
    global gdb_prompt
    global mi_gdb_prompt
    global MIFLAGS
 
    gdb_stop_suppressing_tests;
 
    if { [info procs sid_exit] != "" } {
        sid_exit
    }
 
    if ![info exists gdb_spawn_id] {
        return;
    }
 
    verbose "Quitting $GDB $INTERNAL_GDBFLAGS $GDBFLAGS $MIFLAGS"
 
    if { [is_remote host] && [board_info host exists fileid] } {
        send_gdb "999-gdb-exit\n";
        gdb_expect 10 {
            -re "y or n" {
                send_gdb "y\n";
                exp_continue;
            }
            -re "Undefined command.*$gdb_prompt $" {
                send_gdb "quit\n"
                exp_continue;
            }
            -re "DOSEXIT code" { }
            default { }
        }
    }
 
    if ![is_remote host] {
        remote_close host;
    }
    unset gdb_spawn_id
}
 
#
# default_mi_gdb_start [INFERIOR_PTY] -- start gdb running, default procedure
#
# INFERIOR_PTY should be set to separate-inferior-tty to have the inferior work
# with it's own PTY. If set to same-inferior-tty, the inferior shares GDB's PTY.
# The default value is same-inferior-tty.
#
# When running over NFS, particularly if running many simultaneous
# tests on different hosts all using the same server, things can
# get really slow.  Give gdb at least 3 minutes to start up.
#
proc default_mi_gdb_start { args } {
    global verbose
    global GDB
    global INTERNAL_GDBFLAGS GDBFLAGS
    global gdb_prompt
    global mi_gdb_prompt
    global timeout
    global gdb_spawn_id;
    global MIFLAGS
 
    gdb_stop_suppressing_tests;
    set inferior_pty no-tty
 
    if { [llength $args] == 1} {
        set inferior_pty [lindex $args 0]
    }
 
    set separate_inferior_pty [string match $inferior_pty separate-inferior-tty]
 
    # Start SID.
    if { [info procs sid_start] != "" } {
        verbose "Spawning SID"
        sid_start
    }
 
    verbose "Spawning $GDB $INTERNAL_GDBFLAGS $GDBFLAGS $MIFLAGS"
 
    if [info exists gdb_spawn_id] {
        return 0;
    }
 
    if ![is_remote host] {
        if { [which $GDB] == 0 } then {
            perror "$GDB does not exist."
            exit 1
        }
    }
 
    # Create the new PTY for the inferior process.
    if { $separate_inferior_pty } {
        spawn -pty
        global mi_inferior_spawn_id
        global mi_inferior_tty_name
        set mi_inferior_spawn_id $spawn_id
        set mi_inferior_tty_name $spawn_out(slave,name)
    }
 
    set res [remote_spawn host "$GDB $INTERNAL_GDBFLAGS $GDBFLAGS $MIFLAGS [host_info gdb_opts]"];
    if { $res < 0 || $res == "" } {
        perror "Spawning $GDB failed."
        return 1;
    }
    gdb_expect {
        -re "~\"GNU.*\r\n~\".*$mi_gdb_prompt$" {
            # We have a new format mi startup prompt.  If we are
            # running mi1, then this is an error as we should be
            # using the old-style prompt.
            if { $MIFLAGS == "-i=mi1" } {
                perror "(mi startup) Got unexpected new mi prompt."
                remote_close host;
                return -1;
            }
            verbose "GDB initialized."
        }
        -re "\[^~\].*$mi_gdb_prompt$" {
            # We have an old format mi startup prompt.  If we are
            # not running mi1, then this is an error as we should be
            # using the new-style prompt.
            if { $MIFLAGS != "-i=mi1" } {
                perror "(mi startup) Got unexpected old mi prompt."
                remote_close host;
                return -1;
            }
            verbose "GDB initialized."
        }
        -re ".*unrecognized option.*for a complete list of options." {
            untested "Skip mi tests (not compiled with mi support)."
            remote_close host;
            return -1;
        }
        -re ".*Interpreter `mi' unrecognized." {
            untested "Skip mi tests (not compiled with mi support)."
            remote_close host;
            return -1;
        }
        timeout {
            perror "(timeout) GDB never initialized after 10 seconds."
            remote_close host;
            return -1
        }
    }
    set gdb_spawn_id -1;
 
    # FIXME: mi output does not go through pagers, so these can be removed.
    # force the height to "unlimited", so no pagers get used
    send_gdb "100-gdb-set height 0\n"
    gdb_expect 10 {
        -re ".*100-gdb-set height 0\r\n100\\\^done\r\n$mi_gdb_prompt$" {
            verbose "Setting height to 0." 2
        }
        timeout {
            warning "Couldn't set the height to 0"
        }
    }
    # force the width to "unlimited", so no wraparound occurs
    send_gdb "101-gdb-set width 0\n"
    gdb_expect 10 {
        -re ".*101-gdb-set width 0\r\n101\\\^done\r\n$mi_gdb_prompt$" {
            verbose "Setting width to 0." 2
        }
        timeout {
            warning "Couldn't set the width to 0."
        }
    }
    # If allowing the inferior to have its own PTY then assign the inferior
    # its own terminal device here.
    if { $separate_inferior_pty } {
        send_gdb "102-inferior-tty-set $mi_inferior_tty_name\n"
        gdb_expect 10 {
            -re ".*102\\\^done\r\n$mi_gdb_prompt$" {
                verbose "redirect inferior output to new terminal device."
            }
            timeout {
                warning "Couldn't redirect inferior output." 2
            }
        }
    }
 
    detect_async
 
    return 0;
}
 
#
# Overridable function. You can override this function in your
# baseboard file.
#
proc mi_gdb_start { args } {
  return [default_mi_gdb_start $args]
}
 
# Many of the tests depend on setting breakpoints at various places and
# running until that breakpoint is reached.  At times, we want to start
# with a clean-slate with respect to breakpoints, so this utility proc
# lets us do this without duplicating this code everywhere.
#
 
proc mi_delete_breakpoints {} {
    global mi_gdb_prompt
 
# FIXME: The mi operation won't accept a prompt back and will use the 'all' arg
    send_gdb "102-break-delete\n"
    gdb_expect 30 {
         -re "Delete all breakpoints.*y or n.*$" {
            send_gdb "y\n";
            exp_continue
         }
         -re "102-break-delete\r\n102\\\^done\r\n$mi_gdb_prompt$" {
            # This happens if there were no breakpoints
         }
         timeout { perror "Delete all breakpoints in mi_delete_breakpoints (timeout)" ; return }
    }
 
# The correct output is not "No breakpoints or watchpoints." but an
# empty BreakpointTable. Also, a query is not acceptable with mi.
    send_gdb "103-break-list\n"
    gdb_expect 30 {
         -re "103-break-list\r\n103\\\^done,BreakpointTable=\{\}\r\n$mi_gdb_prompt$" {}
         -re "103-break-list\r\n103\\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[\\\]\}\r\n$mi_gdb_prompt$" {}
         -re "103-break-list\r\n103\\\^doneNo breakpoints or watchpoints.\r\n\r\n$mi_gdb_prompt$" {warning "Unexpected console text received"}
         -re "$mi_gdb_prompt$" { perror "Breakpoints not deleted" ; return }
         -re "Delete all breakpoints.*or n.*$" {
            warning "Unexpected prompt for breakpoints deletion";
            send_gdb "y\n";
            exp_continue
        }
         timeout { perror "-break-list (timeout)" ; return }
    }
}
 
proc mi_gdb_reinitialize_dir { subdir } {
    global mi_gdb_prompt
    global MIFLAGS
 
    global suppress_flag
    if { $suppress_flag } {
        return
    }
 
    if [is_remote host] {
        return "";
    }
 
    if { $MIFLAGS == "-i=mi1" } {
      send_gdb "104-environment-directory\n"
      gdb_expect 60 {
        -re ".*Reinitialize source path to empty.*y or n. " {
            warning "Got confirmation prompt for dir reinitialization."
            send_gdb "y\n"
            gdb_expect 60 {
                -re "$mi_gdb_prompt$" {}
                timeout {error "Dir reinitialization failed (timeout)"}
            }
        }
        -re "$mi_gdb_prompt$" {}
        timeout {error "Dir reinitialization failed (timeout)"}
      }
    } else {
      send_gdb "104-environment-directory -r\n"
      gdb_expect 60 {
        -re "104\\\^done,source-path=.*\r\n$mi_gdb_prompt$" {}
        -re "$mi_gdb_prompt$" {}
        timeout {error "Dir reinitialization failed (timeout)"}
      }
    }
 
    send_gdb "105-environment-directory $subdir\n"
    gdb_expect 60 {
        -re "Source directories searched.*$mi_gdb_prompt$" {
            verbose "Dir set to $subdir"
        }
        -re "105\\\^done.*\r\n$mi_gdb_prompt$" {
            # FIXME: We return just the prompt for now.
            verbose "Dir set to $subdir"
            # perror "Dir \"$subdir\" failed."
        }
    }
}
 
# Send GDB the "target" command.
# FIXME: Some of these patterns are not appropriate for MI.  Based on
# config/monitor.exp:gdb_target_command.
proc mi_gdb_target_cmd { targetname serialport } {
    global mi_gdb_prompt
 
    set serialport_re [string_to_regexp $serialport]
    for {set i 1} {$i <= 3} {incr i} {
        send_gdb "47-target-select $targetname $serialport\n"
        gdb_expect 60 {
            -re "47\\^connected.*$mi_gdb_prompt" {
                verbose "Set target to $targetname";
                return 0;
            }
            -re "unknown host.*$mi_gdb_prompt" {
                verbose "Couldn't look up $serialport"
            }
            -re "Couldn't establish connection to remote.*$mi_gdb_prompt$" {
                verbose "Connection failed";
            }
            -re "Remote MIPS debugging.*$mi_gdb_prompt$" {
                verbose "Set target to $targetname";
                return 0;
            }
            -re "Remote debugging using .*$serialport_re.*$mi_gdb_prompt$" {
                verbose "Set target to $targetname";
                return 0;
            }
            -re "Remote target $targetname connected to.*$mi_gdb_prompt$" {
                verbose "Set target to $targetname";
                return 0;
            }
            -re "Connected to.*$mi_gdb_prompt$" {
                verbose "Set target to $targetname";
                return 0;
            }
            -re "Ending remote.*$mi_gdb_prompt$" { }
            -re "Connection refused.*$mi_gdb_prompt$" {
                verbose "Connection refused by remote target.  Pausing, and trying again."
                sleep 5
                continue
            }
            -re "Non-stop mode requested, but remote does not support non-stop.*$mi_gdb_prompt" {
                unsupported "Non-stop mode not supported"
                return 1
            }
            -re "Timeout reading from remote system.*$mi_gdb_prompt$" {
                verbose "Got timeout error from gdb.";
            }
            timeout {
                send_gdb "";
                break
            }
        }
    }
    return 1
}
 
#
# load a file into the debugger (file command only).
# return a -1 if anything goes wrong.
#
proc mi_gdb_file_cmd { arg } {
    global verbose
    global loadpath
    global loadfile
    global GDB
    global mi_gdb_prompt
    global last_loaded_file
    upvar timeout timeout
 
    set last_loaded_file $arg
 
    if [is_remote host] {
        set arg [remote_download host $arg];
        if { $arg == "" } {
            error "download failed"
            return -1;
        }
    }
 
# FIXME: Several of these patterns are only acceptable for console
# output.  Queries are an error for mi.
    send_gdb "105-file-exec-and-symbols $arg\n"
    gdb_expect 120 {
        -re "Reading symbols from.*done.*$mi_gdb_prompt$" {
            verbose "\t\tLoaded $arg into the $GDB"
            return 0
        }
        -re "has no symbol-table.*$mi_gdb_prompt$" {
            perror "$arg wasn't compiled with \"-g\""
            return -1
        }
        -re "Load new symbol table from \".*\".*y or n. $" {
            send_gdb "y\n"
            gdb_expect 120 {
                -re "Reading symbols from.*done.*$mi_gdb_prompt$" {
                    verbose "\t\tLoaded $arg with new symbol table into $GDB"
                    # All OK
                }
                timeout {
                    perror "(timeout) Couldn't load $arg, other program already loaded."
                    return -1
                }
            }
        }
        -re "No such file or directory.*$mi_gdb_prompt$" {
            perror "($arg) No such file or directory\n"
            return -1
        }
        -re "105-file-exec-and-symbols .*\r\n105\\\^done\r\n$mi_gdb_prompt$" {
            # We (MI) are just giving the prompt back for now, instead of giving
            # some acknowledgement.
            return 0
        }
        timeout {
            perror "couldn't load $arg into $GDB (timed out)."
            return -1
        }
        eof {
            # This is an attempt to detect a core dump, but seems not to
            # work.  Perhaps we need to match .* followed by eof, in which
            # gdb_expect does not seem to have a way to do that.
            perror "couldn't load $arg into $GDB (end of file)."
            return -1
        }
    }
}
 
#
# connect to the target and download a file, if necessary.
# return a -1 if anything goes wrong.
#
proc mi_gdb_target_load { } {
    global verbose
    global loadpath
    global loadfile
    global GDB
    global mi_gdb_prompt
    upvar timeout timeout
 
    if { [info procs gdbserver_gdb_load] != "" } {
        mi_gdb_test "kill" ".*" ""
        set res [gdbserver_gdb_load]
        set protocol [lindex $res 0]
        set gdbport [lindex $res 1]
 
        if { [mi_gdb_target_cmd $protocol $gdbport] != 0 } {
            return -1
        }
    } elseif { [info procs send_target_sid] != "" } {
        # For SID, things get complex
        send_gdb "kill\n"
        gdb_expect 10 {
            -re ".*$mi_gdb_prompt$"
        }
        send_target_sid
        gdb_expect 60 {
            -re "\\^done.*$mi_gdb_prompt$" {
            }
            timeout {
                perror "Unable to connect to SID target"
                return -1
            }
        }
        send_gdb "48-target-download\n"
        gdb_expect 10 {
            -re "48\\^done.*$mi_gdb_prompt$" {
            }
            timeout {
                perror "Unable to download to SID target"
                return -1
            }
        }
    } elseif { [target_info protocol] == "sim" } {
        # For the simulator, just connect to it directly.
        send_gdb "47-target-select sim\n"
        gdb_expect 10 {
            -re "47\\^connected.*$mi_gdb_prompt$" {
            }
            timeout {
                perror "Unable to select sim target"
                return -1
            }
        }
        send_gdb "48-target-download\n"
        gdb_expect 10 {
            -re "48\\^done.*$mi_gdb_prompt$" {
            }
            timeout {
                perror "Unable to download to sim target"
                return -1
            }
        }
    } elseif { [target_info gdb_protocol] == "remote" } {
        # remote targets
        if { [mi_gdb_target_cmd "remote" [target_info netport]] != 0 } {
            perror "Unable to connect to remote target"
            return -1
        }
        send_gdb "48-target-download\n"
        gdb_expect 10 {
            -re "48\\^done.*$mi_gdb_prompt$" {
            }
            timeout {
                perror "Unable to download to remote target"
                return -1
            }
        }
    }
    return 0
}
 
#
# load a file into the debugger.
# return a -1 if anything goes wrong.
#
proc mi_gdb_load { arg } {
    if { $arg != "" } {
        return [mi_gdb_file_cmd $arg]
    }
    return 0
}
 
# mi_gdb_test COMMAND PATTERN MESSAGE [IPATTERN] -- send a command to gdb;
#   test the result.
#
# COMMAND is the command to execute, send to GDB with send_gdb.  If
#   this is the null string no command is sent.
# PATTERN is the pattern to match for a PASS, and must NOT include
#   the \r\n sequence immediately before the gdb prompt.
# MESSAGE is the message to be printed.  (If this is the empty string,
#   then sometimes we don't call pass or fail at all; I don't
#   understand this at all.)
# IPATTERN is the pattern to match for the inferior's output.  This parameter
#   is optional.  If present, it will produce a PASS if the match is
#   successful, and a FAIL if unsuccessful.
#
# Returns:
#    1 if the test failed,
#    0 if the test passes,
#   -1 if there was an internal error.
#
proc mi_gdb_test { args } {
    global verbose
    global mi_gdb_prompt
    global GDB expect_out
    upvar timeout timeout
 
    set command [lindex $args 0]
    set pattern [lindex $args 1]
    set message [lindex $args 2]
 
    if [llength $args]==4 {
        set ipattern [lindex $args 3]
    }
 
    if [llength $args]==5 {
        set question_string [lindex $args 3];
        set response_string [lindex $args 4];
    } else {
        set question_string "^FOOBAR$"
    }
 
    if $verbose>2 then {
        send_user "Sending \"$command\" to gdb\n"
        send_user "Looking to match \"$pattern\"\n"
        send_user "Message is \"$message\"\n"
    }
 
    set result -1
    set string "${command}\n";
    set string_regex [string_to_regexp $command]
 
    if { $command != "" } {
        while { "$string" != "" } {
            set foo [string first "\n" "$string"];
            set len [string length "$string"];
            if { $foo < [expr $len - 1] } {
                set str [string range "$string" 0 $foo];
                if { [send_gdb "$str"] != "" } {
                    global suppress_flag;
 
                    if { ! $suppress_flag } {
                        perror "Couldn't send $command to GDB.";
                    }
                    fail "$message";
                    return $result;
                }
                gdb_expect 2 {
                    -re "\[\r\n\]" { }
                    timeout { }
                }
                set string [string range "$string" [expr $foo + 1] end];
            } else {
                break;
            }
        }
        if { "$string" != "" } {
            if { [send_gdb "$string"] != "" } {
                global suppress_flag;
 
                if { ! $suppress_flag } {
                    perror "Couldn't send $command to GDB.";
                }
                fail "$message";
                return $result;
            }
        }
    }
 
    if [info exists timeout] {
        set tmt $timeout;
    } else {
        global timeout;
        if [info exists timeout] {
            set tmt $timeout;
        } else {
            set tmt 60;
        }
    }
    verbose -log "Expecting: ^($string_regex\[\r\n\]+)?($pattern\[\r\n\]+$mi_gdb_prompt\[ \]*)"
    gdb_expect $tmt {
         -re "\\*\\*\\* DOSEXIT code.*" {
             if { $message != "" } {
                 fail "$message";
             }
             gdb_suppress_entire_file "GDB died";
             return -1;
         }
         -re "Ending remote debugging.*$mi_gdb_prompt\[ \]*$" {
            if ![isnative] then {
                warning "Can`t communicate to remote target."
            }
            gdb_exit
            gdb_start
            set result -1
        }
         -re "^($string_regex\[\r\n\]+)?($pattern\[\r\n\]+$mi_gdb_prompt\[ \]*)" {
            # At this point, $expect_out(1,string) is the MI input command.
            # and $expect_out(2,string) is the MI output command.
            # If $expect_out(1,string) is "", then there was no MI input command here.
 
            # NOTE, there is no trailing anchor because with GDB/MI,
            # asynchronous responses can happen at any point, causing more
            # data to be available.  Normally an anchor is used to make
            # sure the end of the output is matched, however, $mi_gdb_prompt
            # is just as good of an anchor since mi_gdb_test is meant to
            # match a single mi output command.  If a second GDB/MI output
            # response is sent, it will be in the buffer for the next
            # time mi_gdb_test is called.
            if ![string match "" $message] then {
                pass "$message"
            }
            set result 0
        }
         -re "(${question_string})$" {
            send_gdb "$response_string\n";
            exp_continue;
        }
         -re "Undefined.* command:.*$mi_gdb_prompt\[ \]*$" {
            perror "Undefined command \"$command\"."
            fail "$message"
            set result 1
        }
         -re "Ambiguous command.*$mi_gdb_prompt\[ \]*$" {
            perror "\"$command\" is not a unique command name."
            fail "$message"
            set result 1
        }
         -re "Program exited with code \[0-9\]+.*$mi_gdb_prompt\[ \]*$" {
            if ![string match "" $message] then {
                set errmsg "$message (the program exited)"
            } else {
                set errmsg "$command (the program exited)"
            }
            fail "$errmsg"
            return -1
        }
         -re "The program is not being run.*$mi_gdb_prompt\[ \]*$" {
            if ![string match "" $message] then {
                set errmsg "$message (the program is no longer running)"
            } else {
                set errmsg "$command (the program is no longer running)"
            }
            fail "$errmsg"
            return -1
        }
         -re ".*$mi_gdb_prompt\[ \]*$" {
            if ![string match "" $message] then {
                fail "$message"
            }
            set result 1
        }
         "" {
            send_gdb "\n"
            perror "Window too small."
            fail "$message"
        }
         -re "\\(y or n\\) " {
            send_gdb "n\n"
            perror "Got interactive prompt."
            fail "$message"
        }
         eof {
             perror "Process no longer exists"
             if { $message != "" } {
                 fail "$message"
             }
             return -1
        }
         full_buffer {
            perror "internal buffer is full."
            fail "$message"
        }
        timeout {
            if ![string match "" $message] then {
                fail "$message (timeout)"
            }
            set result 1
        }
    }
 
    # If the GDB output matched, compare the inferior output.
    if { $result == 0 } {
        if [ info exists ipattern ] {
            if { ![target_info exists gdb,noinferiorio] } {
                global mi_inferior_spawn_id
                expect {
                    -i $mi_inferior_spawn_id -re "$ipattern" {
                        pass "$message inferior output"
                    }
                    timeout {
                        fail "$message inferior output (timeout)"
                        set result 1
                    }
                }
            } else {
                unsupported "$message inferior output"
            }
        }
    }
 
    return $result
}
 
#
# MI run command.  (A modified version of gdb_run_cmd)
#
 
# In patterns, the newline sequence ``\r\n'' is matched explicitly as
# ``.*$'' could swallow up output that we attempt to match elsewhere.
 
proc mi_run_cmd {args} {
    global suppress_flag
    if { $suppress_flag } {
        return -1
    }
    global mi_gdb_prompt
    global thread_selected_re
    global library_loaded_re
 
    if [target_info exists gdb_init_command] {
        send_gdb "[target_info gdb_init_command]\n";
        gdb_expect 30 {
            -re "$mi_gdb_prompt$" { }
            default {
                perror "gdb_init_command for target failed";
                return -1;
            }
        }
    }
 
    if { [mi_gdb_target_load] < 0 } {
        return -1
    }
 
    if [target_info exists use_gdb_stub] {
        if [target_info exists gdb,do_reload_on_run] {
            send_gdb "220-exec-continue\n";
            gdb_expect 60 {
                -re "220\\^running\[\r\n\]+\\*running,thread-id=\"\[^\"\]+\"\r\n$mi_gdb_prompt" {}
                default {}
            }
            return 0;
        }
 
        if [target_info exists gdb,start_symbol] {
            set start [target_info gdb,start_symbol];
        } else {
            set start "start";
        }
 
        # HACK: Should either use 000-jump or fix the target code
        # to better handle RUN.
        send_gdb  "jump *$start\n"
        warning "Using CLI jump command, expect run-to-main FAIL"
        return 0
    }
 
    send_gdb "220-exec-run $args\n"
    gdb_expect {
        -re "220\\^running\r\n(\\*running,thread-id=\"\[^\"\]+\"\r\n|=thread-created,id=\"1\",group-id=\"\[0-9\]+\"\r\n)*(${library_loaded_re})*(${thread_selected_re})?${mi_gdb_prompt}" {
        }
        -re "\\^error,msg=\"The target does not support running in non-stop mode.\"" {
            unsupported "Non-stop mode not supported"
            return -1
        }
        timeout {
            perror "Unable to start target"
            return -1
        }
    }
    # NOTE: Shortly after this there will be a ``000*stopped,...(gdb)''
 
    return 0
}
 
#
# Just like run-to-main but works with the MI interface
#
 
proc mi_run_to_main { } {
    global suppress_flag
    if { $suppress_flag } {
        return -1
    }
 
    global srcdir
    global subdir
    global binfile
    global srcfile
 
    mi_delete_breakpoints
    mi_gdb_reinitialize_dir $srcdir/$subdir
    mi_gdb_load ${binfile}
 
    mi_runto main
}
 
 
# Just like gdb's "runto" proc, it will run the target to a given
# function.  The big difference here between mi_runto and mi_execute_to
# is that mi_execute_to must have the inferior running already.  This
# proc will (like gdb's runto) (re)start the inferior, too.
#
# FUNC is the linespec of the place to stop (it inserts a breakpoint here).
# It returns:
#   -1  if test suppressed, failed, timedout
#    0  if test passed
 
proc mi_runto_helper {func run_or_continue} {
  global suppress_flag
  if { $suppress_flag } {
    return -1
  }
 
  global mi_gdb_prompt expect_out
  global hex decimal fullname_syntax
 
  set test "mi runto $func"
  mi_gdb_test "200-break-insert -t $func" \
    "200\\^done,bkpt=\{number=\"\[0-9\]+\",type=\"breakpoint\",disp=\"del\",enabled=\"y\",addr=\"$hex\",func=\"$func\(\\\(.*\\\)\)?\",file=\".*\",line=\"\[0-9\]*\",times=\"0\",original-location=\".*\"\}" \
    "breakpoint at $func"
 
  if {![regexp {number="[0-9]+"} $expect_out(buffer) str]
      || ![scan $str {number="%d"} bkptno]} {
    set bkptno {[0-9]+}
  }
 
  if {$run_or_continue == "run"} {
      if { [mi_run_cmd] < 0 } {
          return -1
      }
  } else {
      mi_send_resuming_command "exec-continue" "$test"
  }
 
  mi_expect_stop "breakpoint-hit" $func ".*" ".*" "\[0-9\]+" { "" "disp=\"del\"" } $test
}
 
proc mi_runto {func} {
    return [mi_runto_helper $func "run"]
}
 
# Next to the next statement
# For return values, see mi_execute_to_helper
 
proc mi_next { test } {
  return [mi_next_to {.*} {.*} {.*} {.*} $test]
}
 
 
# Step to the next statement
# For return values, see mi_execute_to_helper
 
proc mi_step { test } {
  return [mi_step_to {.*} {.*} {.*} {.*} $test]
}
 
set async "unknown"
 
proc detect_async {} {
    global async
    global mi_gdb_prompt
 
    send_gdb "show target-async\n"
 
    gdb_expect {
        -re ".*Controlling the inferior in asynchronous mode is on...*$mi_gdb_prompt$" {
            set async 1
        }
        -re ".*$mi_gdb_prompt$" {
            set async 0
        }
        timeout {
            set async 0
        }
    }
    return $async
}
 
# Wait for MI *stopped notification to appear.
# The REASON, FUNC, ARGS, FILE and LINE are regular expressions
# to match against whatever is output in *stopped.  ARGS should
# not include [] the list of argument is enclosed in, and other
# regular expressions should not include quotes.
# If EXTRA is a list of one element, it's the regular expression
# for output expected right after *stopped, and before GDB prompt.
# If EXTRA is a list of two elements, the first element is for
# output right after *stopped, and the second element is output
# right after reason field.  The regex after reason should not include
# the comma separating it from the following fields.
#
# When we fail to match output at all, -1 is returned.  Otherwise,
# the line at which we stop is returned.  This is useful when exact
# line is not possible to specify for some reason -- one can pass
# the .* or "\[0-9\]*" regexps for line, and then check the line
# programmatically.
#
# Do not pass .* for any argument if you are expecting more than one stop.
proc mi_expect_stop { reason func args file line extra test } {
 
    global mi_gdb_prompt
    global hex
    global decimal
    global fullname_syntax
    global async
    global thread_selected_re
 
    set after_stopped ""
    set after_reason ""
    if { [llength $extra] == 2 } {
        set after_stopped [lindex $extra 0]
        set after_reason [lindex $extra 1]
        set after_reason "${after_reason},"
    } elseif { [llength $extra] == 1 } {
        set after_stopped [lindex $extra 0]
    }
 
    if {$async} {
        set prompt_re ""
    } else {
        set prompt_re "$mi_gdb_prompt$"
    }
 
    if { $reason == "really-no-reason" } {
        gdb_expect {
          -re "\\*stopped\r\n$prompt_re" {
            pass "$test"
          }
          timeout {
              fail "$test (unknown output after running)"
          }
        }
        return
    }
 
    if { $reason == "exited-normally" } {
 
        gdb_expect {
          -re "\\*stopped,reason=\"exited-normally\"\r\n$prompt_re" {
            pass "$test"
          }
          -re ".*$mi_gdb_prompt$" {fail "continue to end (2)"}
          timeout {
              fail "$test (unknown output after running)"
          }
        }
        return
    }
 
    set args "\\\[$args\\\]"
 
    set bn ""
    if { $reason == "breakpoint-hit" } {
        set bn {bkptno="[0-9]+",}
    }
 
    set r ""
    if { $reason != "" } {
        set r "reason=\"$reason\","
    }
 
 
    set a $after_reason
 
    set any "\[^\n\]*"
 
    verbose -log "mi_expect_stop: expecting: \\*stopped,${r}${a}${bn}frame=\{addr=\"$hex\",func=\"$func\",args=$args,file=\"$any$file\",fullname=\"${fullname_syntax}$file\",line=\"$line\"\}$after_stopped,thread-id=\"$decimal\",stopped-threads=$any\r\n($thread_selected_re)?$prompt_re"
    gdb_expect {
        -re "\\*stopped,${r}${a}${bn}frame=\{addr=\"$hex\",func=\"$func\",args=$args,file=\"$any$file\",fullname=\"${fullname_syntax}$file\",line=\"($line)\"\}$after_stopped,thread-id=\"$decimal\",stopped-threads=$any\r\n($thread_selected_re)?$prompt_re" {
            pass "$test"
            return $expect_out(2,string)
        }
        -re "\\*stopped,${r}${a}${bn}frame=\{addr=\"$hex\",func=\"$any\",args=\[\\\[\{\]$any\[\\\]\}\],file=\"$any\",fullname=\"${fullname_syntax}$any\",line=\"\[0-9\]*\"\}$after_stopped,thread-id=\"$decimal\",stopped-threads=$any\r\n$prompt_re" {
            verbose -log "got $expect_out(buffer)"
            fail "$test (stopped at wrong place)"
            return -1
        }
        -re ".*\r\n$mi_gdb_prompt$" {
            verbose -log "got $expect_out(buffer)"
            fail "$test (unknown output after running)"
            return -1
        }
        timeout {
            fail "$test (timeout)"
            return -1
        }
    }
}
 
# Wait for MI *stopped notification related to an interrupt request to
# appear.
proc mi_expect_interrupt { test } {
    global mi_gdb_prompt
    global decimal
    global async
 
    if {$async} {
        set prompt_re ""
    } else {
        set prompt_re "$mi_gdb_prompt$"
    }
 
    set r "reason=\"signal-received\",signal-name=\"0\",signal-meaning=\"Signal 0\""
 
    set any "\[^\n\]*"
 
    # A signal can land anywhere, just ignore the location
    verbose -log "mi_expect_interrupt: expecting: \\*stopped,${r}$any\r\n$prompt_re"
    gdb_expect {
        -re "\\*stopped,${r}$any\r\n$prompt_re" {
            pass "$test"
            return 0;
        }
        -re ".*\r\n$mi_gdb_prompt$" {
            verbose -log "got $expect_out(buffer)"
            fail "$test (unknown output after running)"
            return -1
        }
        timeout {
            fail "$test (timeout)"
            return -1
        }
    }
}
 
# cmd should not include the number or newline (i.e. "exec-step 3", not
# "220-exec-step 3\n"
 
# Can not match -re ".*\r\n${mi_gdb_prompt}", because of false positives
# after the first prompt is printed.
 
proc mi_execute_to { cmd reason func args file line extra test } {
    global suppress_flag
    if { $suppress_flag } {
        return -1
    }
 
    mi_send_resuming_command "$cmd" "$test"
    set r [mi_expect_stop $reason $func $args $file $line $extra $test]
    return $r
}
 
proc mi_next_to { func args file line test } {
    mi_execute_to "exec-next" "end-stepping-range" "$func" "$args" \
        "$file" "$line" "" "$test"
}
 
proc mi_step_to { func args file line test } {
    mi_execute_to "exec-step" "end-stepping-range" "$func" "$args" \
        "$file" "$line" "" "$test"
}
 
proc mi_finish_to { func args file line result ret test } {
    mi_execute_to "exec-finish" "function-finished" "$func" "$args" \
        "$file" "$line" \
        ",gdb-result-var=\"$result\",return-value=\"$ret\"" \
        "$test"
}
 
proc mi_continue_to {func} {
    mi_runto_helper $func "continue"
}
 
proc mi0_execute_to { cmd reason func args file line extra test } {
    mi_execute_to_helper "$cmd" "$reason" "$func" "\{$args\}" \
        "$file" "$line" "$extra" "$test"
}
 
proc mi0_next_to { func args file line test } {
    mi0_execute_to "exec-next" "end-stepping-range" "$func" "$args" \
        "$file" "$line" "" "$test"
}
 
proc mi0_step_to { func args file line test } {
    mi0_execute_to "exec-step" "end-stepping-range" "$func" "$args" \
        "$file" "$line" "" "$test"
}
 
proc mi0_finish_to { func args file line result ret test } {
    mi0_execute_to "exec-finish" "function-finished" "$func" "$args" \
        "$file" "$line" \
        ",gdb-result-var=\"$result\",return-value=\"$ret\"" \
        "$test"
}
 
proc mi0_continue_to { bkptno func args file line test } {
    mi0_execute_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \
        "$func" "$args" "$file" "$line" "" "$test"
}
 
# Creates a breakpoint and checks the reported fields are as expected
proc mi_create_breakpoint { location number disp func file line address test } {
    verbose -log "Expecting: 222\\^done,bkpt=\{number=\"$number\",type=\"breakpoint\",disp=\"$disp\",enabled=\"y\",addr=\"$address\",func=\"$func\",file=\"$file\",fullname=\".*\",line=\"$line\",times=\"0\",original-location=\".*\"\}"
    mi_gdb_test "222-break-insert $location" \
        "222\\^done,bkpt=\{number=\"$number\",type=\"breakpoint\",disp=\"$disp\",enabled=\"y\",addr=\"$address\",func=\"$func\",file=\"$file\",fullname=\".*\",line=\"$line\",times=\"0\",original-location=\".*\"\}" \
        $test
}
 
proc mi_list_breakpoints { expected test } {
    set fullname ".*"
 
    set body ""
    set first 1
 
    foreach item $expected {
        if {$first == 0} {
            set body "$body,"
            set first 0
        }
        set number [lindex $item 0]
        set disp [lindex $item 1]
        set func [lindex $item 2]
        set file [lindex $item 3]
        set line [lindex $item 4]
        set address [lindex $item 5]
        set body "${body}bkpt=\{number=\"$number\",type=\"breakpoint\",disp=\"$disp\",enabled=\"y\",addr=\"$address\",func=\"$func\",file=\".*$file\",${fullname},line=\"$line\",times=\"0\",original-location=\".*\"\}"
        set first 0
    }
 
    verbose -log "Expecting: 666\\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[$body\\\]\}"
    mi_gdb_test "666-break-list" \
        "666\\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[$body\\\]\}" \
        $test
}
 
# Creates varobj named NAME for EXPRESSION.
# Name cannot be "-".
proc mi_create_varobj { name expression testname } {
    mi_gdb_test "-var-create $name * $expression" \
        "\\^done,name=\"$name\",numchild=\"\[0-9\]+\",value=\".*\",type=.*,has_more=\"0\"" \
        $testname
}
 
proc mi_create_floating_varobj { name expression testname } {
    mi_gdb_test "-var-create $name @ $expression" \
        "\\^done,name=\"$name\",numchild=\"\(-1\|\[0-9\]+\)\",value=\".*\",type=.*" \
        $testname
}
 
 
# Same as mi_create_varobj, but also checks the reported type
# of the varobj.
proc mi_create_varobj_checked { name expression type testname } {
    mi_gdb_test "-var-create $name * $expression" \
        "\\^done,name=\"$name\",numchild=\"\[0-9\]+\",value=\".*\",type=\"$type\".*" \
        $testname
}
 
# Same as mi_create_floating_varobj, but assumes the test is creating
# a dynamic varobj that has children, so the value must be "{...}".
proc mi_create_dynamic_varobj {name expression testname} {
    mi_gdb_test "-var-create $name @ $expression" \
        "\\^done,name=\"$name\",numchild=\"\(-1\|\[0-9\]+\)\",value=\"{\\.\\.\\.}\",type=.*" \
        $testname
}
 
# Deletes the specified NAME.
proc mi_delete_varobj { name testname } {
    mi_gdb_test "-var-delete $name" \
        "\\^done,ndeleted=.*" \
        $testname
}
 
# Updates varobj named NAME and checks that all varobjs in EXPECTED
# are reported as updated, and no other varobj is updated.
# Assumes that no varobj is out of scope and that no varobj changes
# types.
proc mi_varobj_update { name expected testname } {
    set er "\\^done,changelist=\\\["
    set first 1
    foreach item $expected {
        set v "{name=\"$item\",in_scope=\"true\",type_changed=\"false\",has_more=\".\"}"
        if {$first == 1} {
            set er "$er$v"
            set first 0
        } else {
            set er "$er,$v"
        }
    }
    set er "$er\\\]"
 
    verbose -log "Expecting: $er" 2
    mi_gdb_test "-var-update $name" $er $testname
}
 
proc mi_varobj_update_with_type_change { name new_type new_children testname } {
    set v "{name=\"$name\",in_scope=\"true\",type_changed=\"true\",new_type=\"$new_type\",new_num_children=\"$new_children\",has_more=\".\"}"
    set er "\\^done,changelist=\\\[$v\\\]"
    verbose -log "Expecting: $er"
    mi_gdb_test "-var-update $name" $er $testname
}
 
# A helper that turns a key/value list into a regular expression
# matching some MI output.
proc mi_varobj_update_kv_helper {list} {
    set first 1
    set rx ""
    foreach {key value} $list {
        if {!$first} {
            append rx ,
        }
        set first 0
        if {$key == "new_children"} {
            append rx "$key=\\\[$value\\\]"
        } else {
            append rx "$key=\"$value\""
        }
    }
    return $rx
}
 
# A helper for mi_varobj_update_dynamic that computes a match
# expression given a child list.
proc mi_varobj_update_dynamic_helper {children} {
    set crx ""
 
    set first 1
    foreach child $children {
        if {!$first} {
            append crx ,
        }
        set first 0
        append crx "{"
        append crx [mi_varobj_update_kv_helper $child]
        append crx "}"
    }
 
    return $crx
}
 
# Update a dynamic varobj named NAME.  CHILDREN is a list of children
# that have been updated; NEW_CHILDREN is a list of children that were
# added to the primary varobj.  Each child is a list of key/value
# pairs that are expected.  SELF is a key/value list holding
# information about the varobj itself.  TESTNAME is the name of the
# test.
proc mi_varobj_update_dynamic {name testname self children new_children} {
    if {[llength $new_children]} {
        set newrx [mi_varobj_update_dynamic_helper $new_children]
        lappend self new_children $newrx
    }
    set selfrx [mi_varobj_update_kv_helper $self]
    set crx [mi_varobj_update_dynamic_helper $children]
 
    set er "\\^done,changelist=\\\[\{name=\"$name\",in_scope=\"true\""
    append er ",$selfrx\}"
    if {"$crx" != ""} {
        append er ",$crx"
    }
    append er "\\\]"
 
    verbose -log "Expecting: $er"
    mi_gdb_test "-var-update $name" $er $testname
}
 
proc mi_check_varobj_value { name value testname } {
 
    mi_gdb_test "-var-evaluate-expression $name" \
        "\\^done,value=\"$value\"" \
        $testname
}
 
# Helper proc which constructs a child regexp for
# mi_list_varobj_children and mi_varobj_update_dynamic.
proc mi_child_regexp {children add_child} {
    set children_exp {}
    set whatever "\"\[^\"\]+\""
 
    if {$add_child} {
        set pre "child="
    } else {
        set pre ""
    }
 
    foreach item $children {
 
        set name [lindex $item 0]
        set exp [lindex $item  1]
        set numchild [lindex $item 2]
        if {[llength $item] == 5} {
            set type [lindex $item 3]
            set value [lindex $item 4]
 
            lappend children_exp\
                "$pre{name=\"$name\",exp=\"$exp\",numchild=\"$numchild\",value=\"$value\",type=\"$type\"\(,thread-id=\"\[0-9\]+\")?}"
        } elseif {[llength $item] == 4} {
            set type [lindex $item 3]
 
            lappend children_exp\
                "$pre{name=\"$name\",exp=\"$exp\",numchild=\"$numchild\",type=\"$type\"\(,thread-id=\"\[0-9\]+\")?}"
        } else {
            lappend children_exp\
                "$pre{name=\"$name\",exp=\"$exp\",numchild=\"$numchild\"(,thread-id=\"\[0-9\]+\")?}"
        }
    }
    return [join $children_exp ","]
}
 
# Check the results of the:
#
#   -var-list-children VARNAME
#
# command.  The CHILDREN parement should be a list of lists.
# Each inner list can have either 3 or 4 elements, describing
# fields that gdb is expected to report for child variable object,
# in the following order
#
#   - Name
#   - Expression
#   - Number of children
#   - Type
#
# If inner list has 3 elements, the gdb is expected to output no
# type for a child and no value.
#
# If the inner list has 4 elements, gdb output is expected to
# have no value.
#
proc mi_list_varobj_children { varname children testname } {
    mi_list_varobj_children_range $varname "" "" [llength $children] $children \
      $testname
}
 
# Like mi_list_varobj_children, but sets a subrange.  NUMCHILDREN is
# the total number of children.
proc mi_list_varobj_children_range {varname from to numchildren children testname} {
    set options ""
    if {[llength $varname] == 2} {
        set options [lindex $varname 1]
        set varname [lindex $varname 0]
    }
 
    set whatever "\"\[^\"\]+\""
 
    set children_exp_j [mi_child_regexp $children 1]
    if {$numchildren} {
        set expected "\\^done,numchild=\".*\",children=\\\[$children_exp_j.*\\\]"
    } {
        set expected "\\^done,numchild=\"0\""
    }
 
    if {"$to" == ""} {
        append expected ",has_more=\"0\""
    } elseif {$to >= 0 && $numchildren > $to} {
        append expected ",has_more=\"1\""
    } else {
        append expected ",has_more=\"0\""
    }
 
    verbose -log "Expecting: $expected"
 
    mi_gdb_test "-var-list-children $options $varname $from $to" \
      $expected $testname
}
 
# Verifies that variable object VARNAME has NUMBER children,
# where each one is named $VARNAME. and has type TYPE.
proc mi_list_array_varobj_children { varname number type testname } {
    set t {}
    for {set i 0} {$i < $number} {incr i} {
        lappend t [list $varname.$i $i 0 $type]
    }
    mi_list_varobj_children $varname $t $testname
}
 
# A list of two-element lists.  First element of each list is
# a Tcl statement, and the second element is the line
# number of source C file where the statement originates.
set mi_autotest_data ""
# The name of the source file for autotesting.
set mi_autotest_source ""
 
proc count_newlines { string } {
    return [regexp -all "\n" $string]
}
 
# Prepares for running inline tests in FILENAME.
# See comments for mi_run_inline_test for detailed
# explanation of the idea and syntax.
proc mi_prepare_inline_tests { filename } {
 
    global srcdir
    global subdir
    global mi_autotest_source
    global mi_autotest_data
 
    set mi_autotest_data {}
 
    set mi_autotest_source $filename
 
    if { ! [regexp "^/" "$filename"] } then {
        set filename "$srcdir/$subdir/$filename"
    }
 
    set chan [open $filename]
    set content [read $chan]
    set line_number 1
    while {1} {
        set start [string first "/*:" $content]
        if {$start != -1} {
            set end [string first ":*/" $content]
            if {$end == -1} {
                error "Unterminated special comment in $filename"
            }
 
            set prefix [string range $content 0 $start]
            set prefix_newlines [count_newlines $prefix]
 
            set line_number [expr $line_number+$prefix_newlines]
            set comment_line $line_number
 
            set comment [string range $content [expr $start+3] [expr $end-1]]
 
            set comment_newlines [count_newlines $comment]
            set line_number [expr $line_number+$comment_newlines]
 
            set comment [string trim $comment]
            set content [string range $content [expr $end+3] \
                             [string length $content]]
            lappend mi_autotest_data [list $comment $comment_line]
        } else {
           break
        }
    }
    close $chan
}
 
# Helper to mi_run_inline_test below.
# Return the list of all (statement,line_number) lists
# that comprise TESTCASE.  The begin and end markers
# are not included.
proc mi_get_inline_test {testcase} {
 
    global mi_gdb_prompt
    global mi_autotest_data
    global mi_autotest_source
 
    set result {}
 
    set seen_begin 0
    set seen_end 0
    foreach l $mi_autotest_data {
 
        set comment [lindex $l 0]
 
        if {$comment == "BEGIN: $testcase"} {
            set seen_begin 1
        } elseif {$comment == "END: $testcase"} {
            set seen_end 1
            break
        } elseif {$seen_begin==1} {
            lappend result $l
        }
    }
 
    if {$seen_begin == 0} {
        error "Autotest $testcase not found"
    }
 
    if {$seen_begin == 1 && $seen_end == 0} {
        error "Missing end marker for test $testcase"
    }
 
    return $result
}
 
# Sets temporary breakpoint at LOCATION.
proc mi_tbreak {location} {
 
    global mi_gdb_prompt
 
    mi_gdb_test "-break-insert -t $location" \
        {\^done,bkpt=.*} \
        "run to $location (set breakpoint)"
}
 
# Send COMMAND that must be a command that resumes
# the inferiour (run/continue/next/etc) and consumes
# the "^running" output from it.
proc mi_send_resuming_command_raw {command test} {
 
    global mi_gdb_prompt
    global thread_selected_re
    global library_loaded_re
 
    send_gdb "$command\n"
    gdb_expect {
        -re "\\^running\r\n\\*running,thread-id=\"\[^\"\]+\"\r\n($library_loaded_re)*($thread_selected_re)?${mi_gdb_prompt}" {
            # Note that lack of 'pass' call here -- this works around limitation
            # in DejaGNU xfail mechanism. mi-until.exp has this:
            #
            #     setup_kfail gdb/2104 "*-*-*"
            #     mi_execute_to ...
            #
            # and mi_execute_to uses mi_send_resuming_command.  If we use 'pass' here,
            # it will reset kfail, so when the actual test fails, it will be flagged
            # as real failure.
            return 0
        }
        -re "\\^error,msg=\"Displaced stepping is only supported in ARM mode\".*" {
            unsupported "$test (Thumb mode)"
            return -1
        }
        -re "\\^error,msg=.*" {
            fail "$test (MI error)"
            return -1
        }
        -re ".*${mi_gdb_prompt}" {
            fail "$test (failed to resume)"
            return -1
        }
        timeout {
            fail "$test"
            return -1
        }
    }
}
 
proc mi_send_resuming_command {command test} {
    mi_send_resuming_command_raw -$command $test
}
 
# Helper to mi_run_inline_test below.
# Sets a temporary breakpoint at LOCATION and runs
# the program using COMMAND.  When the program is stopped
# returns the line at which it.  Returns -1 if line cannot
# be determined.
# Does not check that the line is the same as requested.
# The caller can check itself if required.
proc mi_continue_to_line {location test} {
 
    mi_tbreak $location
    mi_send_resuming_command "exec-continue" "run to $location (exec-continue)"
    return [mi_get_stop_line $test]
}
 
# Wait until gdb prints the current line.
proc mi_get_stop_line {test} {
 
  global mi_gdb_prompt
  global async
 
  if {$async} {
      set prompt_re ""
  } else {
      set prompt_re "$mi_gdb_prompt$"
  }
 
  gdb_expect {
      -re ".*line=\"(\[0-9\]*)\".*\r\n$prompt_re" {
          return $expect_out(1,string)
      }
      -re ".*$mi_gdb_prompt" {
          fail "wait for stop ($test)"
      }
      timeout {
          fail "wait for stop ($test)"
      }
  }
}
 
# Run a MI test embedded in comments in a C file.
# The C file should contain special comments in the following
# three forms:
#
#    /*: BEGIN: testname :*/
#    /*:   :*/
#    /*: END: testname :*/
#
# This procedure find the begin and end marker for the requested
# test. Then, a temporary breakpoint is set at the begin
# marker and the program is run (from start).
#
# After that, for each special comment between the begin and end
# marker, the Tcl statements are executed.  It is assumed that
# for each comment, the immediately preceding line is executable
# C statement.  Then, gdb will be single-stepped until that
# preceding C statement is executed, and after that the
# Tcl statements in the comment will be executed.
#
# For example:
#
#     /*: BEGIN: assignment-test :*/
#     v = 10;
#     /*: 
#     /*: END: assignment-test :*/
#
# The mi_prepare_inline_tests function should be called before
# calling this function.  A given C file can contain several
# inline tests.  The names of the tests must be unique within one
# C file.
#
proc mi_run_inline_test { testcase } {
 
    global mi_gdb_prompt
    global hex
    global decimal
    global fullname_syntax
    global mi_autotest_source
 
    set commands [mi_get_inline_test $testcase]
 
    set first 1
    set line_now 1
 
    foreach c $commands {
        set statements [lindex $c 0]
        set line [lindex $c 1]
        set line [expr $line-1]
 
        # We want gdb to be stopped at the expression immediately
        # before the comment.  If this is the first comment, the
        # program is either not started yet or is in some random place,
        # so we run it.  For further comments, we might be already
        # standing at the right line. If not continue till the
        # right line.
 
        if {$first==1} {
            # Start the program afresh.
            mi_tbreak "$mi_autotest_source:$line"
            mi_run_cmd
            set line_now [mi_get_stop_line "$testcase: step to $line"]
            set first 0
        } elseif {$line_now!=$line} {
            set line_now [mi_continue_to_line "$mi_autotest_source:$line" "continue to $line"]
        }
 
        if {$line_now!=$line} {
            fail "$testcase: go to line $line"
        }
 
        # We're not at the statement right above the comment.
        # Execute that statement so that the comment can test
        # the state after the statement is executed.
 
        # Single-step past the line.
        if { [mi_send_resuming_command "exec-next" "$testcase: step over $line"] != 0 } {
            return -1
        }
        set line_now [mi_get_stop_line "$testcase: step over $line"]
 
        # We probably want to use 'uplevel' so that statements
        # have direct access to global variables that the
        # main 'exp' file has set up.  But it's not yet clear,
        # will need more experience to be sure.
        eval $statements
    }
}
 
proc get_mi_thread_list {name} {
  global expect_out
 
  # MI will return a list of thread ids:
  #
  # -thread-list-ids
  # ^done,thread-ids=[thread-id="1",thread-id="2",...],number-of-threads="N"
  # (gdb)
  mi_gdb_test "-thread-list-ids" \
    {.*\^done,thread-ids={(thread-id="[0-9]+"(,)?)+},current-thread-id="[0-9]+",number-of-threads="[0-9]+"} \
    "-thread_list_ids ($name)"
 
  set output {}
  if {[info exists expect_out(buffer)]} {
    set output $expect_out(buffer)
  }
 
  set thread_list {}
  if {![regexp {thread-ids=\{(thread-id="[0-9]+"(,)?)*\}} $output threads]} {
    fail "finding threads in MI output ($name)"
  } else {
    pass "finding threads in MI output ($name)"
 
    # Make list of console threads
    set start [expr {[string first \{ $threads] + 1}]
    set end   [expr {[string first \} $threads] - 1}]
    set threads [string range $threads $start $end]
    foreach thread [split $threads ,] {
      if {[scan $thread {thread-id="%d"} num]} {
        lappend thread_list $num
      }
    }
  }
 
  return $thread_list
}
 
# Check that MI and the console know of the same threads.
# Appends NAME to all test names.
proc check_mi_and_console_threads {name} {
  global expect_out
 
  mi_gdb_test "-thread-list-ids" \
    {.*\^done,thread-ids={(thread-id="[0-9]+"(,)*)+},current-thread-id="[0-9]+",number-of-threads="[0-9]+"} \
    "-thread-list-ids ($name)"
  set mi_output {}
  if {[info exists expect_out(buffer)]} {
    set mi_output $expect_out(buffer)
  }
 
  # GDB will return a list of thread ids and some more info:
  #
  # (gdb)
  # -interpreter-exec console "info threads"
  # ~"  4 Thread 2051 (LWP 7734)  0x401166b1 in __libc_nanosleep () at __libc_nanosleep:-1"
  # ~"  3 Thread 1026 (LWP 7733)   () at __libc_nanosleep:-1"
  # ~"  2 Thread 2049 (LWP 7732)  0x401411f8 in __poll (fds=0x804bb24, nfds=1, timeout=2000) at ../sysdeps/unix/sysv/linux/poll.c:63"
  # ~"* 1 Thread 1024 (LWP 7731)  main (argc=1, argv=0xbfffdd94) at ../../../src/gdb/testsuite/gdb.mi/pthreads.c:160"
  # FIXME: kseitz/2002-09-05: Don't use the hack-cli method.
  mi_gdb_test "info threads" \
    {.*(~".*"[\r\n]*)+.*} \
    "info threads ($name)"
  set console_output {}
  if {[info exists expect_out(buffer)]} {
    set console_output $expect_out(buffer)
  }
 
  # Make a list of all known threads to console (gdb's thread IDs)
  set console_thread_list {}
  foreach line [split $console_output \n] {
    if {[string index $line 0] == "~"} {
      # This is a line from the console; trim off "~", " ", "*", and "\""
      set line [string trim $line ~\ \"\*]
      if {[scan $line "%d" id] == 1} {
        lappend console_thread_list $id
      }
    }
  }
 
  # Now find the result string from MI
  set mi_result ""
  foreach line [split $mi_output \n] {
    if {[string range $line 0 4] == "^done"} {
      set mi_result $line
    }
  }
  if {$mi_result == ""} {
    fail "finding MI result string ($name)"
  } else {
    pass "finding MI result string ($name)"
  }
 
  # Finally, extract the thread ids and compare them to the console
  set num_mi_threads_str ""
  if {![regexp {number-of-threads="[0-9]+"} $mi_result num_mi_threads_str]} {
    fail "finding number of threads in MI output ($name)"
  } else {
    pass "finding number of threads in MI output ($name)"
 
    # Extract the number of threads from the MI result
    if {![scan $num_mi_threads_str {number-of-threads="%d"} num_mi_threads]} {
      fail "got number of threads from MI ($name)"
    } else {
      pass "got number of threads from MI ($name)"
 
      # Check if MI and console have same number of threads
      if {$num_mi_threads != [llength $console_thread_list]} {
        fail "console and MI have same number of threads ($name)"
      } else {
        pass "console and MI have same number of threads ($name)"
 
        # Get MI thread list
        set mi_thread_list [get_mi_thread_list $name]
 
        # Check if MI and console have the same threads
        set fails 0
        foreach ct [lsort $console_thread_list] mt [lsort $mi_thread_list] {
          if {$ct != $mt} {
            incr fails
          }
        }
        if {$fails > 0} {
          fail "MI and console have same threads ($name)"
 
          # Send a list of failures to the log
          send_log "Console has thread ids: $console_thread_list\n"
          send_log "MI has thread ids: $mi_thread_list\n"
        } else {
          pass "MI and console have same threads ($name)"
        }
      }
    }
  }
}
 
proc mi_load_shlibs { args } {
    if {![is_remote target]} {
        return
    }
 
    foreach file $args {
        gdb_download $file
    }
 
    # Even if the target supplies full paths for shared libraries,
    # they may not be paths for this system.
    mi_gdb_test "set solib-search-path [file dirname [lindex $args 0]]" "\^done" ""
}
 
proc mi_reverse_list { list } {
    if { [llength $list] <= 1 } {
        return $list
    }
    set tail [lrange $list 1 [llength $list]]
    set rtail [mi_reverse_list $tail]
    lappend rtail [lindex $list 0]
    return $rtail
}
 
proc mi_check_thread_states { xstates test } {
    global expect_out
    set states [mi_reverse_list $xstates]
    set pattern ".*\\^done,threads=\\\["
    foreach s $states {
        set pattern "${pattern}(.*)state=\"$s\""
    }
    set pattern "${pattern}(,core=\"\[0-9\]*\")?\\\}\\\].*"
 
    verbose -log "expecting: $pattern"
    mi_gdb_test "-thread-info" $pattern $test
}
 
# Return a list of MI features supported by this gdb.
proc mi_get_features {} {
    global expect_out mi_gdb_prompt
 
    send_gdb "-list-features\n"
 
    gdb_expect {
        -re "\\^done,features=\\\[(.*)\\\]\r\n$mi_gdb_prompt$" {
            regsub -all -- \" $expect_out(1,string) "" features
            return [split $features ,]
        }
        -re ".*\r\n$mi_gdb_prompt$" {
            verbose -log "got $expect_out(buffer)"
            return ""
        }
        timeout {
            verbose -log "timeout in mi_gdb_prompt"
            return ""
        }
    }
}
Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-7.1/] [gdb/] [testsuite/] [lib/] [mi-support.exp] - Blame information for rev 816

Line No.	Rev	Author	Line
1	227	jeremybenn	`# Copyright 1999, 2000, 2002, 2003, 2004, 2005, 2007, 2008, 2009, 2010`
2			`# Free Software Foundation, Inc.`
3
4			`# This program is free software; you can redistribute it and/or modify`
5			`# it under the terms of the GNU General Public License as published by`
6			`# the Free Software Foundation; either version 3 of the License, or`
7			`# (at your option) any later version.`
8			`#`
9			`# This program is distributed in the hope that it will be useful,`
10			`# but WITHOUT ANY WARRANTY; without even the implied warranty of`
11			`# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
12			`# GNU General Public License for more details.`
13			`#`
14			`# You should have received a copy of the GNU General Public License`
15			`# along with this program. If not, see .`
16
17			`# This file was based on a file written by Fred Fish. (fnf@cygnus.com)`
18
19			`# Test setup routines that work with the MI interpreter.`
20
21			`# The variable mi_gdb_prompt is a regexp which matches the gdb mi prompt.`
22			`# Set it if it is not already set.`
23			`global mi_gdb_prompt`
24			`if ![info exists mi_gdb_prompt] then {`
25			`set mi_gdb_prompt "\[(\]gdb\[)\] \r\n"`
26			`}`
27
28			`global mi_inferior_spawn_id`
29			`global mi_inferior_tty_name`
30
31			`set MIFLAGS "-i=mi"`
32
33			`set thread_selected_re "=thread-selected,id=\"\[0-9+\]\"\r\n"`
34			`set library_loaded_re "=library-loaded\[^\n\]+\"\r\n"`
35
36			`#`
37			`# mi_gdb_exit -- exit the GDB, killing the target program if necessary`
38			`#`
39			`proc mi_gdb_exit {} {`
40			`catch mi_uncatched_gdb_exit`