Subversion Repositories openrisc

/* Remote target system call callback support.

   Copyright 1997, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.

   Contributed by Cygnus Solutions.

   This file is part of GDB.

   This program is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 3 of the License, or

   (at your option) any later version.

   This program is distributed in the hope that it will be useful,

   but WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License

   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */

/* This interface isn't intended to be specific to any particular kind

   of remote (hardware, simulator, whatever).  As such, support for it

   (e.g. sim/common/callback.c) should *not* live in the simulator source

   tree, nor should it live in the gdb source tree.  */

/* There are various ways to handle system calls:

   1) Have a simulator intercept the appropriate trap instruction and

   directly perform the system call on behalf of the target program.

   This is the typical way of handling system calls for embedded targets.

   [Handling system calls for embedded targets isn't that much of an

   oxymoron as running compiler testsuites make use of the capability.]

   This method of system call handling is done when STATE_ENVIRONMENT

   is ENVIRONMENT_USER.

   2) Have a simulator emulate the hardware as much as possible.

   If the program running on the real hardware communicates with some sort

   of target manager, one would want to be able to run this program on the

   simulator as well.

   This method of system call handling is done when STATE_ENVIRONMENT

   is ENVIRONMENT_OPERATING.

*/

#ifndef CALLBACK_H

#define CALLBACK_H

/* ??? The reason why we check for va_start here should be documented.  */

#ifndef va_start

#include <ansidecl.h>

#include <stdarg.h>

#endif

/* Needed for enum bfd_endian.  */

#include "bfd.h"

/* Mapping of host/target values.  */

/* ??? For debugging purposes, one might want to add a string of the

   name of the symbol.  */

typedef struct {

  int host_val;

  int target_val;

} CB_TARGET_DEFS_MAP;

#define MAX_CALLBACK_FDS 10

/* Forward decl for stat/fstat.  */

struct stat;

typedef struct host_callback_struct host_callback;

struct host_callback_struct

{

  int (*close) PARAMS ((host_callback *,int));

  int (*get_errno) PARAMS ((host_callback *));

  int (*isatty) PARAMS ((host_callback *, int));

  int (*lseek) PARAMS ((host_callback *, int, long , int));

  int (*open) PARAMS ((host_callback *, const char*, int mode));

  int (*read) PARAMS ((host_callback *,int,  char *, int));

  int (*read_stdin) PARAMS (( host_callback *, char *, int));

  int (*rename) PARAMS ((host_callback *, const char *, const char *));

  int (*system) PARAMS ((host_callback *, const char *));

  long (*time) PARAMS ((host_callback *, long *));

  int (*unlink) PARAMS ((host_callback *, const char *));

  int (*write) PARAMS ((host_callback *,int, const char *, int));

  int (*write_stdout) PARAMS ((host_callback *, const char *, int));

  void (*flush_stdout) PARAMS ((host_callback *));

  int (*write_stderr) PARAMS ((host_callback *, const char *, int));

  void (*flush_stderr) PARAMS ((host_callback *));

  int (*stat) PARAMS ((host_callback *, const char *, struct stat *));

  int (*fstat) PARAMS ((host_callback *, int, struct stat *));

  int (*lstat) PARAMS ((host_callback *, const char *, struct stat *));

  int (*ftruncate) PARAMS ((host_callback *, int, long));

  int (*truncate) PARAMS ((host_callback *, const char *, long));

  int (*pipe) PARAMS ((host_callback *, int *));

  /* Called by the framework when a read call has emptied a pipe buffer.  */

  void (*pipe_empty) PARAMS ((host_callback *, int read_fd, int write_fd));

  /* Called by the framework when a write call makes a pipe buffer

     non-empty.  */

  void (*pipe_nonempty) PARAMS ((host_callback *, int read_fd, int write_fd));

  /* When present, call to the client to give it the oportunity to

     poll any io devices for a request to quit (indicated by a nonzero

     return value). */

  int (*poll_quit) PARAMS ((host_callback *));

  /* Used when the target has gone away, so we can close open

     handles and free memory etc etc.  */

  int (*shutdown) PARAMS ((host_callback *));

  int (*init)     PARAMS ((host_callback *));

  /* depreciated, use vprintf_filtered - Talk to the user on a console.  */

  void (*printf_filtered) PARAMS ((host_callback *, const char *, ...));

  /* Talk to the user on a console.  */

  void (*vprintf_filtered) PARAMS ((host_callback *, const char *, va_list));

  /* Same as vprintf_filtered but to stderr.  */

  void (*evprintf_filtered) PARAMS ((host_callback *, const char *, va_list));

  /* Print an error message and "exit".

     In the case of gdb "exiting" means doing a longjmp back to the main

     command loop.  */

  void (*error) PARAMS ((host_callback *, const char *, ...))

#ifdef __GNUC__

    __attribute__ ((__noreturn__))

#endif

    ;

  int last_errno;               /* host format */

  int fdmap[MAX_CALLBACK_FDS];

  /* fd_buddy is used to contruct circular lists of target fds that point to

     the same host fd.  A uniquely mapped fd points to itself; for a closed

     one, fd_buddy has the value -1.  The host file descriptors for stdin /

     stdout / stderr are never closed by the simulators, so they are put

     in a special fd_buddy circular list which also has MAX_CALLBACK_FDS

     as a member.  */

  /* ??? We don't have a callback entry for dup, although it is trival to

     implement now.  */

  short fd_buddy[MAX_CALLBACK_FDS+1];

  /* 0 = none, >0 = reader (index of writer),

     <0 = writer (negative index of reader).

     If abs (ispipe[N]) == N, then N is an end of a pipe whose other

     end is closed.  */

  short ispipe[MAX_CALLBACK_FDS];

  /* A writer stores the buffer at its index.  Consecutive writes

     realloc the buffer and add to the size.  The reader indicates the

     read part in its .size, until it has consumed it all, at which

     point it deallocates the buffer and zeroes out both sizes.  */

  struct pipe_write_buffer

  {

    int size;

    char *buffer;

  } pipe_buffer[MAX_CALLBACK_FDS];

  /* System call numbers.  */

  CB_TARGET_DEFS_MAP *syscall_map;

  /* Errno values.  */

  CB_TARGET_DEFS_MAP *errno_map;

  /* Flags to the open system call.  */

  CB_TARGET_DEFS_MAP *open_map;

  /* Signal numbers.  */

  CB_TARGET_DEFS_MAP *signal_map;

  /* Layout of `stat' struct.

     The format is a series of "name,length" pairs separated by colons.

     Empty space is indicated with a `name' of "space".

     All padding must be explicitly mentioned.

     Lengths are in bytes.  If this needs to be extended to bits,

     use "name.bits".

     Example: "st_dev,4:st_ino,4:st_mode,4:..."  */

  const char *stat_map;

  enum bfd_endian target_endian;

  /* Size of an "int" on the target (for syscalls whose ABI uses "int").

     This must include padding, and only padding-at-higher-address is

     supported.  For example, a 64-bit target with 32-bit int:s which

     are padded to 64 bits when in an array, should supposedly set this

     to 8.  The default is 4 which matches ILP32 targets and 64-bit

     targets with 32-bit ints and no padding.  */

  int target_sizeof_int;

  /* Marker for those wanting to do sanity checks.

     This should remain the last member of this struct to help catch

     miscompilation errors. */

#define HOST_CALLBACK_MAGIC 4705 /* teds constant */

  int magic;

};

extern host_callback default_callback;

/* Canonical versions of system call numbers.

   It's not intended to willy-nilly throw every system call ever heard

   of in here.  Only include those that have an important use.

   ??? One can certainly start a discussion over the ones that are currently

   here, but that will always be true.  */

/* These are used by the ANSI C support of libc.  */

#define CB_SYS_exit     1

#define CB_SYS_open     2

#define CB_SYS_close    3

#define CB_SYS_read     4

#define CB_SYS_write    5

#define CB_SYS_lseek    6

#define CB_SYS_unlink   7

#define CB_SYS_getpid   8

#define CB_SYS_kill     9

#define CB_SYS_fstat    10

/*#define CB_SYS_sbrk   11 - not currently a system call, but reserved.  */

/* ARGV support.  */

#define CB_SYS_argvlen  12

#define CB_SYS_argv     13

/* These are extras added for one reason or another.  */

#define CB_SYS_chdir    14

#define CB_SYS_stat     15

#define CB_SYS_chmod    16

#define CB_SYS_utime    17

#define CB_SYS_time     18

/* More standard syscalls.  */

#define CB_SYS_lstat    19

#define CB_SYS_rename   20

#define CB_SYS_truncate 21

#define CB_SYS_ftruncate 22

#define CB_SYS_pipe     23

/* Struct use to pass and return information necessary to perform a

   system call.  */

/* FIXME: Need to consider target word size.  */

typedef struct cb_syscall {

  /* The target's value of what system call to perform.  */

  int func;

  /* The arguments to the syscall.  */

  long arg1, arg2, arg3, arg4;

  /* The result.  */

  long result;

  /* Some system calls have two results.  */

  long result2;

  /* The target's errno value, or 0 if success.

     This is converted to the target's value with host_to_target_errno.  */

  int errcode;

  /* Working space to be used by memory read/write callbacks.  */

  PTR p1;

  PTR p2;

  long x1,x2;

  /* Callbacks for reading/writing memory (e.g. for read/write syscalls).

     ??? long or unsigned long might be better to use for the `count'

     argument here.  We mimic sim_{read,write} for now.  Be careful to

     test any changes with -Wall -Werror, mixed signed comparisons

     will get you.  */

  int (*read_mem) PARAMS ((host_callback * /*cb*/, struct cb_syscall * /*sc*/,

                           unsigned long /*taddr*/, char * /*buf*/,

                           int /*bytes*/));

  int (*write_mem) PARAMS ((host_callback * /*cb*/, struct cb_syscall * /*sc*/,

                            unsigned long /*taddr*/, const char * /*buf*/,

                            int /*bytes*/));

  /* For sanity checking, should be last entry.  */

  int magic;

} CB_SYSCALL;

/* Magic number sanity checker.  */

#define CB_SYSCALL_MAGIC 0x12344321

/* Macro to initialize CB_SYSCALL.  Called first, before filling in

   any fields.  */

#define CB_SYSCALL_INIT(sc) \

do { \

  memset ((sc), 0, sizeof (*(sc))); \

  (sc)->magic = CB_SYSCALL_MAGIC; \

} while (0)

/* Return codes for various interface routines.  */

typedef enum {

  CB_RC_OK = 0,

  /* generic error */

  CB_RC_ERR,

  /* either file not found or no read access */

  CB_RC_ACCESS,

  CB_RC_NO_MEM

} CB_RC;

/* Read in target values for system call numbers, errno values, signals.  */

CB_RC cb_read_target_syscall_maps PARAMS ((host_callback *, const char *));

/* Translate target to host syscall function numbers.  */

int cb_target_to_host_syscall PARAMS ((host_callback *, int));

/* Translate host to target errno value.  */

int cb_host_to_target_errno PARAMS ((host_callback *, int));

/* Translate target to host open flags.  */

int cb_target_to_host_open PARAMS ((host_callback *, int));

/* Translate target signal number to host.  */

int cb_target_to_host_signal PARAMS ((host_callback *, int));

/* Translate host signal number to target.  */

int cb_host_to_target_signal PARAMS ((host_callback *, int));

/* Translate host stat struct to target.

   If stat struct ptr is NULL, just compute target stat struct size.

   Result is size of target stat struct or 0 if error.  */

int cb_host_to_target_stat PARAMS ((host_callback *, const struct stat *, PTR));

/* Translate a value to target endian.  */

void cb_store_target_endian PARAMS ((host_callback *, char *, int, long));

/* Tests for special fds.  */

int cb_is_stdin PARAMS ((host_callback *, int));

int cb_is_stdout PARAMS ((host_callback *, int));

int cb_is_stderr PARAMS ((host_callback *, int));

/* Perform a system call.  */

CB_RC cb_syscall PARAMS ((host_callback *, CB_SYSCALL *));

#endif