OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [newlib-1.17.0/] [libgloss/] [bfin/] [include/] [defBF52x_base.h] - Blame information for rev 840

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 148 jeremybenn
/*
2
 * The authors hereby grant permission to use, copy, modify, distribute,
3
 * and license this software and its documentation for any purpose, provided
4
 * that existing copyright notices are retained in all copies and that this
5
 * notice is included verbatim in any distributions. No written agreement,
6
 * license, or royalty fee is required for any of the authorized uses.
7
 * Modifications to this software may be copyrighted by their authors
8
 * and need not follow the licensing terms described here, provided that
9
 * the new terms are clearly indicated on the first page of each file where
10
 * they apply.
11
 */
12
 
13
/*
14
** defBF52x_base.h
15
**
16
** Copyright (C) 2008 Analog Devices, Inc.
17
**
18
************************************************************************************
19
**
20
** This include file contains a list of macro "defines" to enable the programmer
21
** to use symbolic names for the registers common to the ADSP-BF52x peripherals.
22
**
23
************************************************************************************
24
** System MMR Register Map
25
************************************************************************************/
26
 
27
#ifndef _DEF_BF52X_H
28
#define _DEF_BF52X_H
29
 
30
#ifdef _MISRA_RULES
31
#pragma diag(push)
32
#pragma diag(suppress:misra_rule_19_4)
33
#pragma diag(suppress:misra_rule_19_7)
34
#endif /* _MISRA_RULES */
35
 
36
 
37
/* ************************************************************** */
38
/*   SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF52x    */
39
/* ************************************************************** */
40
 
41
/* ==== begin from defBF534.h ==== */
42
 
43
/* Clock and System Control     (0xFFC00000 - 0xFFC000FF)                                                               */
44
#define PLL_CTL                         0xFFC00000      /* PLL Control Register                                         */
45
#define PLL_DIV                         0xFFC00004      /* PLL Divide Register                                          */
46
#define VR_CTL                          0xFFC00008      /* Voltage Regulator Control Register           */
47
#define PLL_STAT                        0xFFC0000C      /* PLL Status Register                                          */
48
#define PLL_LOCKCNT                     0xFFC00010      /* PLL Lock Count Register                                      */
49
#define CHIPID        0xFFC00014  /* Device ID Register */
50
 
51
 
52
/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF)                                                        */
53
#define SWRST                           0xFFC00100      /* Software Reset Register                                      */
54
#define SYSCR                           0xFFC00104      /* System Configuration Register                        */
55
#define SIC_RVECT                       0xFFC00108      /* Interrupt Reset Vector Address Register      */
56
 
57
#define SIC_IMASK0                      0xFFC0010C      /* Interrupt Mask Register                                      */
58
/* legacy register name (below) provided for backwards code compatibility */
59
#define SIC_IMASK                       SIC_IMASK0
60
 
61
#define SIC_IAR0                        0xFFC00110      /* Interrupt Assignment Register 0                      */
62
#define SIC_IAR1                        0xFFC00114      /* Interrupt Assignment Register 1                      */
63
#define SIC_IAR2                        0xFFC00118      /* Interrupt Assignment Register 2                      */
64
#define SIC_IAR3                        0xFFC0011C      /* Interrupt Assignment Register 3                      */
65
 
66
#define SIC_ISR0                        0xFFC00120      /* Interrupt Status Register                            */
67
/* legacy register name (below) provided for backwards code compatibility */
68
#define SIC_ISR                         SIC_ISR0
69
 
70
#define SIC_IWR0                        0xFFC00124      /* Interrupt Wakeup Register                            */
71
/* legacy register name (below) provided for backwards code compatibility */
72
#define SIC_IWR                         SIC_IWR0
73
 
74
/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */
75
#define SIC_IMASK1                      0xFFC0014C     /* Interrupt Mask register of SIC2 */
76
#define SIC_IAR4                        0xFFC00150     /* Interrupt Assignment register4 */
77
#define SIC_IAR5                        0xFFC00154     /* Interrupt Assignment register5 */
78
#define SIC_IAR6                        0xFFC00158     /* Interrupt Assignment register6 */
79
#define SIC_IAR7                        0xFFC0015C     /* Interrupt Assignment register7 */
80
#define SIC_ISR1                        0xFFC00160     /* Interrupt Statur register */
81
#define SIC_IWR1                        0xFFC00164     /* Interrupt Wakeup register */
82
 
83
 
84
/* Watchdog Timer                       (0xFFC00200 - 0xFFC002FF)                                                               */
85
#define WDOG_CTL                        0xFFC00200      /* Watchdog Control Register                            */
86
#define WDOG_CNT                        0xFFC00204      /* Watchdog Count Register                                      */
87
#define WDOG_STAT                       0xFFC00208      /* Watchdog Status Register                                     */
88
 
89
 
90
/* Real Time Clock              (0xFFC00300 - 0xFFC003FF)                                                                       */
91
#define RTC_STAT                        0xFFC00300      /* RTC Status Register                                          */
92
#define RTC_ICTL                        0xFFC00304      /* RTC Interrupt Control Register                       */
93
#define RTC_ISTAT                       0xFFC00308      /* RTC Interrupt Status Register                        */
94
#define RTC_SWCNT                       0xFFC0030C      /* RTC Stopwatch Count Register                         */
95
#define RTC_ALARM                       0xFFC00310      /* RTC Alarm Time Register                                      */
96
#define RTC_FAST                        0xFFC00314      /* RTC Prescaler Enable Register                        */
97
#define RTC_PREN                        0xFFC00314      /* RTC Prescaler Enable Alternate Macro         */
98
 
99
 
100
/* UART0 Controller             (0xFFC00400 - 0xFFC004FF)                                                                       */
101
#define UART0_THR                       0xFFC00400      /* Transmit Holding register                            */
102
#define UART0_RBR                       0xFFC00400      /* Receive Buffer register                                      */
103
#define UART0_DLL                       0xFFC00400      /* Divisor Latch (Low-Byte)                                     */
104
#define UART0_IER                       0xFFC00404      /* Interrupt Enable Register                            */
105
#define UART0_DLH                       0xFFC00404      /* Divisor Latch (High-Byte)                            */
106
#define UART0_IIR                       0xFFC00408      /* Interrupt Identification Register            */
107
#define UART0_LCR                       0xFFC0040C      /* Line Control Register                                        */
108
#define UART0_MCR                       0xFFC00410      /* Modem Control Register                                       */
109
#define UART0_LSR                       0xFFC00414      /* Line Status Register                                         */
110
#define UART0_MSR                       0xFFC00418      /* Modem Status Register                                        */
111
#define UART0_SCR                       0xFFC0041C      /* SCR Scratch Register                                         */
112
#define UART0_GCTL                      0xFFC00424      /* Global Control Register                                      */
113
 
114
 
115
/* SPI Controller                       (0xFFC00500 - 0xFFC005FF)                                                               */
116
#define SPI_CTL                         0xFFC00500      /* SPI Control Register                                         */
117
#define SPI_FLG                         0xFFC00504      /* SPI Flag register                                            */
118
#define SPI_STAT                        0xFFC00508      /* SPI Status register                                          */
119
#define SPI_TDBR                        0xFFC0050C      /* SPI Transmit Data Buffer Register            */
120
#define SPI_RDBR                        0xFFC00510      /* SPI Receive Data Buffer Register                     */
121
#define SPI_BAUD                        0xFFC00514      /* SPI Baud rate Register                                       */
122
#define SPI_SHADOW                      0xFFC00518      /* SPI_RDBR Shadow Register                                     */
123
 
124
 
125
/* TIMER0-7 Registers           (0xFFC00600 - 0xFFC006FF)                                                               */
126
#define TIMER0_CONFIG           0xFFC00600      /* Timer 0 Configuration Register                       */
127
#define TIMER0_COUNTER          0xFFC00604      /* Timer 0 Counter Register                                     */
128
#define TIMER0_PERIOD           0xFFC00608      /* Timer 0 Period Register                                      */
129
#define TIMER0_WIDTH            0xFFC0060C      /* Timer 0 Width Register                                       */
130
 
131
#define TIMER1_CONFIG           0xFFC00610      /* Timer 1 Configuration Register                       */
132
#define TIMER1_COUNTER          0xFFC00614      /* Timer 1 Counter Register                             */
133
#define TIMER1_PERIOD           0xFFC00618      /* Timer 1 Period Register                              */
134
#define TIMER1_WIDTH            0xFFC0061C      /* Timer 1 Width Register                               */
135
 
136
#define TIMER2_CONFIG           0xFFC00620      /* Timer 2 Configuration Register                       */
137
#define TIMER2_COUNTER          0xFFC00624      /* Timer 2 Counter Register                             */
138
#define TIMER2_PERIOD           0xFFC00628      /* Timer 2 Period Register                              */
139
#define TIMER2_WIDTH            0xFFC0062C      /* Timer 2 Width Register                               */
140
 
141
#define TIMER3_CONFIG           0xFFC00630      /* Timer 3 Configuration Register                       */
142
#define TIMER3_COUNTER          0xFFC00634      /* Timer 3 Counter Register                                     */
143
#define TIMER3_PERIOD           0xFFC00638      /* Timer 3 Period Register                                      */
144
#define TIMER3_WIDTH            0xFFC0063C      /* Timer 3 Width Register                                       */
145
 
146
#define TIMER4_CONFIG           0xFFC00640      /* Timer 4 Configuration Register                       */
147
#define TIMER4_COUNTER          0xFFC00644      /* Timer 4 Counter Register                             */
148
#define TIMER4_PERIOD           0xFFC00648      /* Timer 4 Period Register                              */
149
#define TIMER4_WIDTH            0xFFC0064C      /* Timer 4 Width Register                               */
150
 
151
#define TIMER5_CONFIG           0xFFC00650      /* Timer 5 Configuration Register                       */
152
#define TIMER5_COUNTER          0xFFC00654      /* Timer 5 Counter Register                             */
153
#define TIMER5_PERIOD           0xFFC00658      /* Timer 5 Period Register                              */
154
#define TIMER5_WIDTH            0xFFC0065C      /* Timer 5 Width Register                               */
155
 
156
#define TIMER6_CONFIG           0xFFC00660      /* Timer 6 Configuration Register                       */
157
#define TIMER6_COUNTER          0xFFC00664      /* Timer 6 Counter Register                             */
158
#define TIMER6_PERIOD           0xFFC00668      /* Timer 6 Period Register                              */
159
#define TIMER6_WIDTH            0xFFC0066C      /* Timer 6 Width Register                               */
160
 
161
#define TIMER7_CONFIG           0xFFC00670      /* Timer 7 Configuration Register                       */
162
#define TIMER7_COUNTER          0xFFC00674      /* Timer 7 Counter Register                             */
163
#define TIMER7_PERIOD           0xFFC00678      /* Timer 7 Period Register                              */
164
#define TIMER7_WIDTH            0xFFC0067C      /* Timer 7 Width Register                               */
165
 
166
#define TIMER_ENABLE            0xFFC00680      /* Timer Enable Register                                        */
167
#define TIMER_DISABLE           0xFFC00684      /* Timer Disable Register                                       */
168
#define TIMER_STATUS            0xFFC00688      /* Timer Status Register                                        */
169
 
170
 
171
/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF)                                                                                         */
172
#define PORTFIO                                 0xFFC00700      /* Port F I/O Pin State Specify Register                                */
173
#define PORTFIO_CLEAR                   0xFFC00704      /* Port F I/O Peripheral Interrupt Clear Register               */
174
#define PORTFIO_SET                             0xFFC00708      /* Port F I/O Peripheral Interrupt Set Register                 */
175
#define PORTFIO_TOGGLE                  0xFFC0070C      /* Port F I/O Pin State Toggle Register                                 */
176
#define PORTFIO_MASKA                   0xFFC00710      /* Port F I/O Mask State Specify Interrupt A Register   */
177
#define PORTFIO_MASKA_CLEAR             0xFFC00714      /* Port F I/O Mask Disable Interrupt A Register                 */
178
#define PORTFIO_MASKA_SET               0xFFC00718      /* Port F I/O Mask Enable Interrupt A Register                  */
179
#define PORTFIO_MASKA_TOGGLE    0xFFC0071C      /* Port F I/O Mask Toggle Enable Interrupt A Register   */
180
#define PORTFIO_MASKB                   0xFFC00720      /* Port F I/O Mask State Specify Interrupt B Register   */
181
#define PORTFIO_MASKB_CLEAR             0xFFC00724      /* Port F I/O Mask Disable Interrupt B Register                 */
182
#define PORTFIO_MASKB_SET               0xFFC00728      /* Port F I/O Mask Enable Interrupt B Register                  */
183
#define PORTFIO_MASKB_TOGGLE    0xFFC0072C      /* Port F I/O Mask Toggle Enable Interrupt B Register   */
184
#define PORTFIO_DIR                             0xFFC00730      /* Port F I/O Direction Register                                                */
185
#define PORTFIO_POLAR                   0xFFC00734      /* Port F I/O Source Polarity Register                                  */
186
#define PORTFIO_EDGE                    0xFFC00738      /* Port F I/O Source Sensitivity Register                               */
187
#define PORTFIO_BOTH                    0xFFC0073C      /* Port F I/O Set on BOTH Edges Register                                */
188
#define PORTFIO_INEN                    0xFFC00740      /* Port F I/O Input Enable Register                                     */
189
 
190
 
191
/* SPORT0 Controller            (0xFFC00800 - 0xFFC008FF)                                                                               */
192
#define SPORT0_TCR1                     0xFFC00800      /* SPORT0 Transmit Configuration 1 Register                     */
193
#define SPORT0_TCR2                     0xFFC00804      /* SPORT0 Transmit Configuration 2 Register                     */
194
#define SPORT0_TCLKDIV          0xFFC00808      /* SPORT0 Transmit Clock Divider                                        */
195
#define SPORT0_TFSDIV           0xFFC0080C      /* SPORT0 Transmit Frame Sync Divider                           */
196
#define SPORT0_TX                       0xFFC00810      /* SPORT0 TX Data Register                                                      */
197
#define SPORT0_RX                       0xFFC00818      /* SPORT0 RX Data Register                                                      */
198
#define SPORT0_RCR1                     0xFFC00820      /* SPORT0 Transmit Configuration 1 Register                     */
199
#define SPORT0_RCR2                     0xFFC00824      /* SPORT0 Transmit Configuration 2 Register                     */
200
#define SPORT0_RCLKDIV          0xFFC00828      /* SPORT0 Receive Clock Divider                                         */
201
#define SPORT0_RFSDIV           0xFFC0082C      /* SPORT0 Receive Frame Sync Divider                            */
202
#define SPORT0_STAT                     0xFFC00830      /* SPORT0 Status Register                                                       */
203
#define SPORT0_CHNL                     0xFFC00834      /* SPORT0 Current Channel Register                                      */
204
#define SPORT0_MCMC1            0xFFC00838      /* SPORT0 Multi-Channel Configuration Register 1        */
205
#define SPORT0_MCMC2            0xFFC0083C      /* SPORT0 Multi-Channel Configuration Register 2        */
206
#define SPORT0_MTCS0            0xFFC00840      /* SPORT0 Multi-Channel Transmit Select Register 0      */
207
#define SPORT0_MTCS1            0xFFC00844      /* SPORT0 Multi-Channel Transmit Select Register 1      */
208
#define SPORT0_MTCS2            0xFFC00848      /* SPORT0 Multi-Channel Transmit Select Register 2      */
209
#define SPORT0_MTCS3            0xFFC0084C      /* SPORT0 Multi-Channel Transmit Select Register 3      */
210
#define SPORT0_MRCS0            0xFFC00850      /* SPORT0 Multi-Channel Receive Select Register 0       */
211
#define SPORT0_MRCS1            0xFFC00854      /* SPORT0 Multi-Channel Receive Select Register 1       */
212
#define SPORT0_MRCS2            0xFFC00858      /* SPORT0 Multi-Channel Receive Select Register 2       */
213
#define SPORT0_MRCS3            0xFFC0085C      /* SPORT0 Multi-Channel Receive Select Register 3       */
214
 
215
 
216
/* SPORT1 Controller            (0xFFC00900 - 0xFFC009FF)                                                                               */
217
#define SPORT1_TCR1                     0xFFC00900      /* SPORT1 Transmit Configuration 1 Register                     */
218
#define SPORT1_TCR2                     0xFFC00904      /* SPORT1 Transmit Configuration 2 Register                     */
219
#define SPORT1_TCLKDIV          0xFFC00908      /* SPORT1 Transmit Clock Divider                                        */
220
#define SPORT1_TFSDIV           0xFFC0090C      /* SPORT1 Transmit Frame Sync Divider                           */
221
#define SPORT1_TX                       0xFFC00910      /* SPORT1 TX Data Register                                                      */
222
#define SPORT1_RX                       0xFFC00918      /* SPORT1 RX Data Register                                                      */
223
#define SPORT1_RCR1                     0xFFC00920      /* SPORT1 Transmit Configuration 1 Register                     */
224
#define SPORT1_RCR2                     0xFFC00924      /* SPORT1 Transmit Configuration 2 Register                     */
225
#define SPORT1_RCLKDIV          0xFFC00928      /* SPORT1 Receive Clock Divider                                         */
226
#define SPORT1_RFSDIV           0xFFC0092C      /* SPORT1 Receive Frame Sync Divider                            */
227
#define SPORT1_STAT                     0xFFC00930      /* SPORT1 Status Register                                                       */
228
#define SPORT1_CHNL                     0xFFC00934      /* SPORT1 Current Channel Register                                      */
229
#define SPORT1_MCMC1            0xFFC00938      /* SPORT1 Multi-Channel Configuration Register 1        */
230
#define SPORT1_MCMC2            0xFFC0093C      /* SPORT1 Multi-Channel Configuration Register 2        */
231
#define SPORT1_MTCS0            0xFFC00940      /* SPORT1 Multi-Channel Transmit Select Register 0      */
232
#define SPORT1_MTCS1            0xFFC00944      /* SPORT1 Multi-Channel Transmit Select Register 1      */
233
#define SPORT1_MTCS2            0xFFC00948      /* SPORT1 Multi-Channel Transmit Select Register 2      */
234
#define SPORT1_MTCS3            0xFFC0094C      /* SPORT1 Multi-Channel Transmit Select Register 3      */
235
#define SPORT1_MRCS0            0xFFC00950      /* SPORT1 Multi-Channel Receive Select Register 0       */
236
#define SPORT1_MRCS1            0xFFC00954      /* SPORT1 Multi-Channel Receive Select Register 1       */
237
#define SPORT1_MRCS2            0xFFC00958      /* SPORT1 Multi-Channel Receive Select Register 2       */
238
#define SPORT1_MRCS3            0xFFC0095C      /* SPORT1 Multi-Channel Receive Select Register 3       */
239
 
240
 
241
/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF)                                                                */
242
#define EBIU_AMGCTL                     0xFFC00A00      /* Asynchronous Memory Global Control Register  */
243
#define EBIU_AMBCTL0            0xFFC00A04      /* Asynchronous Memory Bank Control Register 0  */
244
#define EBIU_AMBCTL1            0xFFC00A08      /* Asynchronous Memory Bank Control Register 1  */
245
#define EBIU_SDGCTL                     0xFFC00A10      /* SDRAM Global Control Register                                */
246
#define EBIU_SDBCTL                     0xFFC00A14      /* SDRAM Bank Control Register                                  */
247
#define EBIU_SDRRC                      0xFFC00A18      /* SDRAM Refresh Rate Control Register                  */
248
#define EBIU_SDSTAT                     0xFFC00A1C      /* SDRAM Status Register                                                */
249
 
250
 
251
/* DMA Traffic Control Registers                                                                                                        */
252
#define DMA_TC_PER                      0xFFC00B0C      /* Traffic Control Periods Register                     */
253
#define DMA_TC_CNT                      0xFFC00B10      /* Traffic Control Current Counts Register      */
254
 
255
/* Alternate deprecated register names (below) provided for backwards code compatibility */
256
#define DMA_TCPER                       0xFFC00B0C      /* Traffic Control Periods Register                     */
257
#define DMA_TCCNT                       0xFFC00B10      /* Traffic Control Current Counts Register      */
258
 
259
/* DMA Controller (0xFFC00C00 - 0xFFC00FFF)                                                                                                                     */
260
#define DMA0_NEXT_DESC_PTR              0xFFC00C00      /* DMA Channel 0 Next Descriptor Pointer Register               */
261
#define DMA0_START_ADDR                 0xFFC00C04      /* DMA Channel 0 Start Address Register                                 */
262
#define DMA0_CONFIG                             0xFFC00C08      /* DMA Channel 0 Configuration Register                                 */
263
#define DMA0_X_COUNT                    0xFFC00C10      /* DMA Channel 0 X Count Register                                               */
264
#define DMA0_X_MODIFY                   0xFFC00C14      /* DMA Channel 0 X Modify Register                                              */
265
#define DMA0_Y_COUNT                    0xFFC00C18      /* DMA Channel 0 Y Count Register                                               */
266
#define DMA0_Y_MODIFY                   0xFFC00C1C      /* DMA Channel 0 Y Modify Register                                              */
267
#define DMA0_CURR_DESC_PTR              0xFFC00C20      /* DMA Channel 0 Current Descriptor Pointer Register    */
268
#define DMA0_CURR_ADDR                  0xFFC00C24      /* DMA Channel 0 Current Address Register                               */
269
#define DMA0_IRQ_STATUS                 0xFFC00C28      /* DMA Channel 0 Interrupt/Status Register                              */
270
#define DMA0_PERIPHERAL_MAP             0xFFC00C2C      /* DMA Channel 0 Peripheral Map Register                                */
271
#define DMA0_CURR_X_COUNT               0xFFC00C30      /* DMA Channel 0 Current X Count Register                               */
272
#define DMA0_CURR_Y_COUNT               0xFFC00C38      /* DMA Channel 0 Current Y Count Register                               */
273
 
274
#define DMA1_NEXT_DESC_PTR              0xFFC00C40      /* DMA Channel 1 Next Descriptor Pointer Register               */
275
#define DMA1_START_ADDR                 0xFFC00C44      /* DMA Channel 1 Start Address Register                                 */
276
#define DMA1_CONFIG                             0xFFC00C48      /* DMA Channel 1 Configuration Register                                 */
277
#define DMA1_X_COUNT                    0xFFC00C50      /* DMA Channel 1 X Count Register                                               */
278
#define DMA1_X_MODIFY                   0xFFC00C54      /* DMA Channel 1 X Modify Register                                              */
279
#define DMA1_Y_COUNT                    0xFFC00C58      /* DMA Channel 1 Y Count Register                                               */
280
#define DMA1_Y_MODIFY                   0xFFC00C5C      /* DMA Channel 1 Y Modify Register                                              */
281
#define DMA1_CURR_DESC_PTR              0xFFC00C60      /* DMA Channel 1 Current Descriptor Pointer Register    */
282
#define DMA1_CURR_ADDR                  0xFFC00C64      /* DMA Channel 1 Current Address Register                               */
283
#define DMA1_IRQ_STATUS                 0xFFC00C68      /* DMA Channel 1 Interrupt/Status Register                              */
284
#define DMA1_PERIPHERAL_MAP             0xFFC00C6C      /* DMA Channel 1 Peripheral Map Register                                */
285
#define DMA1_CURR_X_COUNT               0xFFC00C70      /* DMA Channel 1 Current X Count Register                               */
286
#define DMA1_CURR_Y_COUNT               0xFFC00C78      /* DMA Channel 1 Current Y Count Register                               */
287
 
288
#define DMA2_NEXT_DESC_PTR              0xFFC00C80      /* DMA Channel 2 Next Descriptor Pointer Register               */
289
#define DMA2_START_ADDR                 0xFFC00C84      /* DMA Channel 2 Start Address Register                                 */
290
#define DMA2_CONFIG                             0xFFC00C88      /* DMA Channel 2 Configuration Register                                 */
291
#define DMA2_X_COUNT                    0xFFC00C90      /* DMA Channel 2 X Count Register                                               */
292
#define DMA2_X_MODIFY                   0xFFC00C94      /* DMA Channel 2 X Modify Register                                              */
293
#define DMA2_Y_COUNT                    0xFFC00C98      /* DMA Channel 2 Y Count Register                                               */
294
#define DMA2_Y_MODIFY                   0xFFC00C9C      /* DMA Channel 2 Y Modify Register                                              */
295
#define DMA2_CURR_DESC_PTR              0xFFC00CA0      /* DMA Channel 2 Current Descriptor Pointer Register    */
296
#define DMA2_CURR_ADDR                  0xFFC00CA4      /* DMA Channel 2 Current Address Register                               */
297
#define DMA2_IRQ_STATUS                 0xFFC00CA8      /* DMA Channel 2 Interrupt/Status Register                              */
298
#define DMA2_PERIPHERAL_MAP             0xFFC00CAC      /* DMA Channel 2 Peripheral Map Register                                */
299
#define DMA2_CURR_X_COUNT               0xFFC00CB0      /* DMA Channel 2 Current X Count Register                               */
300
#define DMA2_CURR_Y_COUNT               0xFFC00CB8      /* DMA Channel 2 Current Y Count Register                               */
301
 
302
#define DMA3_NEXT_DESC_PTR              0xFFC00CC0      /* DMA Channel 3 Next Descriptor Pointer Register               */
303
#define DMA3_START_ADDR                 0xFFC00CC4      /* DMA Channel 3 Start Address Register                                 */
304
#define DMA3_CONFIG                             0xFFC00CC8      /* DMA Channel 3 Configuration Register                                 */
305
#define DMA3_X_COUNT                    0xFFC00CD0      /* DMA Channel 3 X Count Register                                               */
306
#define DMA3_X_MODIFY                   0xFFC00CD4      /* DMA Channel 3 X Modify Register                                              */
307
#define DMA3_Y_COUNT                    0xFFC00CD8      /* DMA Channel 3 Y Count Register                                               */
308
#define DMA3_Y_MODIFY                   0xFFC00CDC      /* DMA Channel 3 Y Modify Register                                              */
309
#define DMA3_CURR_DESC_PTR              0xFFC00CE0      /* DMA Channel 3 Current Descriptor Pointer Register    */
310
#define DMA3_CURR_ADDR                  0xFFC00CE4      /* DMA Channel 3 Current Address Register                               */
311
#define DMA3_IRQ_STATUS                 0xFFC00CE8      /* DMA Channel 3 Interrupt/Status Register                              */
312
#define DMA3_PERIPHERAL_MAP             0xFFC00CEC      /* DMA Channel 3 Peripheral Map Register                                */
313
#define DMA3_CURR_X_COUNT               0xFFC00CF0      /* DMA Channel 3 Current X Count Register                               */
314
#define DMA3_CURR_Y_COUNT               0xFFC00CF8      /* DMA Channel 3 Current Y Count Register                               */
315
 
316
#define DMA4_NEXT_DESC_PTR              0xFFC00D00      /* DMA Channel 4 Next Descriptor Pointer Register               */
317
#define DMA4_START_ADDR                 0xFFC00D04      /* DMA Channel 4 Start Address Register                                 */
318
#define DMA4_CONFIG                             0xFFC00D08      /* DMA Channel 4 Configuration Register                                 */
319
#define DMA4_X_COUNT                    0xFFC00D10      /* DMA Channel 4 X Count Register                                               */
320
#define DMA4_X_MODIFY                   0xFFC00D14      /* DMA Channel 4 X Modify Register                                              */
321
#define DMA4_Y_COUNT                    0xFFC00D18      /* DMA Channel 4 Y Count Register                                               */
322
#define DMA4_Y_MODIFY                   0xFFC00D1C      /* DMA Channel 4 Y Modify Register                                              */
323
#define DMA4_CURR_DESC_PTR              0xFFC00D20      /* DMA Channel 4 Current Descriptor Pointer Register    */
324
#define DMA4_CURR_ADDR                  0xFFC00D24      /* DMA Channel 4 Current Address Register                               */
325
#define DMA4_IRQ_STATUS                 0xFFC00D28      /* DMA Channel 4 Interrupt/Status Register                              */
326
#define DMA4_PERIPHERAL_MAP             0xFFC00D2C      /* DMA Channel 4 Peripheral Map Register                                */
327
#define DMA4_CURR_X_COUNT               0xFFC00D30      /* DMA Channel 4 Current X Count Register                               */
328
#define DMA4_CURR_Y_COUNT               0xFFC00D38      /* DMA Channel 4 Current Y Count Register                               */
329
 
330
#define DMA5_NEXT_DESC_PTR              0xFFC00D40      /* DMA Channel 5 Next Descriptor Pointer Register               */
331
#define DMA5_START_ADDR                 0xFFC00D44      /* DMA Channel 5 Start Address Register                                 */
332
#define DMA5_CONFIG                             0xFFC00D48      /* DMA Channel 5 Configuration Register                                 */
333
#define DMA5_X_COUNT                    0xFFC00D50      /* DMA Channel 5 X Count Register                                               */
334
#define DMA5_X_MODIFY                   0xFFC00D54      /* DMA Channel 5 X Modify Register                                              */
335
#define DMA5_Y_COUNT                    0xFFC00D58      /* DMA Channel 5 Y Count Register                                               */
336
#define DMA5_Y_MODIFY                   0xFFC00D5C      /* DMA Channel 5 Y Modify Register                                              */
337
#define DMA5_CURR_DESC_PTR              0xFFC00D60      /* DMA Channel 5 Current Descriptor Pointer Register    */
338
#define DMA5_CURR_ADDR                  0xFFC00D64      /* DMA Channel 5 Current Address Register                               */
339
#define DMA5_IRQ_STATUS                 0xFFC00D68      /* DMA Channel 5 Interrupt/Status Register                              */
340
#define DMA5_PERIPHERAL_MAP             0xFFC00D6C      /* DMA Channel 5 Peripheral Map Register                                */
341
#define DMA5_CURR_X_COUNT               0xFFC00D70      /* DMA Channel 5 Current X Count Register                               */
342
#define DMA5_CURR_Y_COUNT               0xFFC00D78      /* DMA Channel 5 Current Y Count Register                               */
343
 
344
#define DMA6_NEXT_DESC_PTR              0xFFC00D80      /* DMA Channel 6 Next Descriptor Pointer Register               */
345
#define DMA6_START_ADDR                 0xFFC00D84      /* DMA Channel 6 Start Address Register                                 */
346
#define DMA6_CONFIG                             0xFFC00D88      /* DMA Channel 6 Configuration Register                                 */
347
#define DMA6_X_COUNT                    0xFFC00D90      /* DMA Channel 6 X Count Register                                               */
348
#define DMA6_X_MODIFY                   0xFFC00D94      /* DMA Channel 6 X Modify Register                                              */
349
#define DMA6_Y_COUNT                    0xFFC00D98      /* DMA Channel 6 Y Count Register                                               */
350
#define DMA6_Y_MODIFY                   0xFFC00D9C      /* DMA Channel 6 Y Modify Register                                              */
351
#define DMA6_CURR_DESC_PTR              0xFFC00DA0      /* DMA Channel 6 Current Descriptor Pointer Register    */
352
#define DMA6_CURR_ADDR                  0xFFC00DA4      /* DMA Channel 6 Current Address Register                               */
353
#define DMA6_IRQ_STATUS                 0xFFC00DA8      /* DMA Channel 6 Interrupt/Status Register                              */
354
#define DMA6_PERIPHERAL_MAP             0xFFC00DAC      /* DMA Channel 6 Peripheral Map Register                                */
355
#define DMA6_CURR_X_COUNT               0xFFC00DB0      /* DMA Channel 6 Current X Count Register                               */
356
#define DMA6_CURR_Y_COUNT               0xFFC00DB8      /* DMA Channel 6 Current Y Count Register                               */
357
 
358
#define DMA7_NEXT_DESC_PTR              0xFFC00DC0      /* DMA Channel 7 Next Descriptor Pointer Register               */
359
#define DMA7_START_ADDR                 0xFFC00DC4      /* DMA Channel 7 Start Address Register                                 */
360
#define DMA7_CONFIG                             0xFFC00DC8      /* DMA Channel 7 Configuration Register                                 */
361
#define DMA7_X_COUNT                    0xFFC00DD0      /* DMA Channel 7 X Count Register                                               */
362
#define DMA7_X_MODIFY                   0xFFC00DD4      /* DMA Channel 7 X Modify Register                                              */
363
#define DMA7_Y_COUNT                    0xFFC00DD8      /* DMA Channel 7 Y Count Register                                               */
364
#define DMA7_Y_MODIFY                   0xFFC00DDC      /* DMA Channel 7 Y Modify Register                                              */
365
#define DMA7_CURR_DESC_PTR              0xFFC00DE0      /* DMA Channel 7 Current Descriptor Pointer Register    */
366
#define DMA7_CURR_ADDR                  0xFFC00DE4      /* DMA Channel 7 Current Address Register                               */
367
#define DMA7_IRQ_STATUS                 0xFFC00DE8      /* DMA Channel 7 Interrupt/Status Register                              */
368
#define DMA7_PERIPHERAL_MAP             0xFFC00DEC      /* DMA Channel 7 Peripheral Map Register                                */
369
#define DMA7_CURR_X_COUNT               0xFFC00DF0      /* DMA Channel 7 Current X Count Register                               */
370
#define DMA7_CURR_Y_COUNT               0xFFC00DF8      /* DMA Channel 7 Current Y Count Register                               */
371
 
372
#define DMA8_NEXT_DESC_PTR              0xFFC00E00      /* DMA Channel 8 Next Descriptor Pointer Register               */
373
#define DMA8_START_ADDR                 0xFFC00E04      /* DMA Channel 8 Start Address Register                                 */
374
#define DMA8_CONFIG                             0xFFC00E08      /* DMA Channel 8 Configuration Register                                 */
375
#define DMA8_X_COUNT                    0xFFC00E10      /* DMA Channel 8 X Count Register                                               */
376
#define DMA8_X_MODIFY                   0xFFC00E14      /* DMA Channel 8 X Modify Register                                              */
377
#define DMA8_Y_COUNT                    0xFFC00E18      /* DMA Channel 8 Y Count Register                                               */
378
#define DMA8_Y_MODIFY                   0xFFC00E1C      /* DMA Channel 8 Y Modify Register                                              */
379
#define DMA8_CURR_DESC_PTR              0xFFC00E20      /* DMA Channel 8 Current Descriptor Pointer Register    */
380
#define DMA8_CURR_ADDR                  0xFFC00E24      /* DMA Channel 8 Current Address Register                               */
381
#define DMA8_IRQ_STATUS                 0xFFC00E28      /* DMA Channel 8 Interrupt/Status Register                              */
382
#define DMA8_PERIPHERAL_MAP             0xFFC00E2C      /* DMA Channel 8 Peripheral Map Register                                */
383
#define DMA8_CURR_X_COUNT               0xFFC00E30      /* DMA Channel 8 Current X Count Register                               */
384
#define DMA8_CURR_Y_COUNT               0xFFC00E38      /* DMA Channel 8 Current Y Count Register                               */
385
 
386
#define DMA9_NEXT_DESC_PTR              0xFFC00E40      /* DMA Channel 9 Next Descriptor Pointer Register               */
387
#define DMA9_START_ADDR                 0xFFC00E44      /* DMA Channel 9 Start Address Register                                 */
388
#define DMA9_CONFIG                             0xFFC00E48      /* DMA Channel 9 Configuration Register                                 */
389
#define DMA9_X_COUNT                    0xFFC00E50      /* DMA Channel 9 X Count Register                                               */
390
#define DMA9_X_MODIFY                   0xFFC00E54      /* DMA Channel 9 X Modify Register                                              */
391
#define DMA9_Y_COUNT                    0xFFC00E58      /* DMA Channel 9 Y Count Register                                               */
392
#define DMA9_Y_MODIFY                   0xFFC00E5C      /* DMA Channel 9 Y Modify Register                                              */
393
#define DMA9_CURR_DESC_PTR              0xFFC00E60      /* DMA Channel 9 Current Descriptor Pointer Register    */
394
#define DMA9_CURR_ADDR                  0xFFC00E64      /* DMA Channel 9 Current Address Register                               */
395
#define DMA9_IRQ_STATUS                 0xFFC00E68      /* DMA Channel 9 Interrupt/Status Register                              */
396
#define DMA9_PERIPHERAL_MAP             0xFFC00E6C      /* DMA Channel 9 Peripheral Map Register                                */
397
#define DMA9_CURR_X_COUNT               0xFFC00E70      /* DMA Channel 9 Current X Count Register                               */
398
#define DMA9_CURR_Y_COUNT               0xFFC00E78      /* DMA Channel 9 Current Y Count Register                               */
399
 
400
#define DMA10_NEXT_DESC_PTR             0xFFC00E80      /* DMA Channel 10 Next Descriptor Pointer Register              */
401
#define DMA10_START_ADDR                0xFFC00E84      /* DMA Channel 10 Start Address Register                                */
402
#define DMA10_CONFIG                    0xFFC00E88      /* DMA Channel 10 Configuration Register                                */
403
#define DMA10_X_COUNT                   0xFFC00E90      /* DMA Channel 10 X Count Register                                              */
404
#define DMA10_X_MODIFY                  0xFFC00E94      /* DMA Channel 10 X Modify Register                                             */
405
#define DMA10_Y_COUNT                   0xFFC00E98      /* DMA Channel 10 Y Count Register                                              */
406
#define DMA10_Y_MODIFY                  0xFFC00E9C      /* DMA Channel 10 Y Modify Register                                             */
407
#define DMA10_CURR_DESC_PTR             0xFFC00EA0      /* DMA Channel 10 Current Descriptor Pointer Register   */
408
#define DMA10_CURR_ADDR                 0xFFC00EA4      /* DMA Channel 10 Current Address Register                              */
409
#define DMA10_IRQ_STATUS                0xFFC00EA8      /* DMA Channel 10 Interrupt/Status Register                             */
410
#define DMA10_PERIPHERAL_MAP    0xFFC00EAC      /* DMA Channel 10 Peripheral Map Register                               */
411
#define DMA10_CURR_X_COUNT              0xFFC00EB0      /* DMA Channel 10 Current X Count Register                              */
412
#define DMA10_CURR_Y_COUNT              0xFFC00EB8      /* DMA Channel 10 Current Y Count Register                              */
413
 
414
#define DMA11_NEXT_DESC_PTR             0xFFC00EC0      /* DMA Channel 11 Next Descriptor Pointer Register              */
415
#define DMA11_START_ADDR                0xFFC00EC4      /* DMA Channel 11 Start Address Register                                */
416
#define DMA11_CONFIG                    0xFFC00EC8      /* DMA Channel 11 Configuration Register                                */
417
#define DMA11_X_COUNT                   0xFFC00ED0      /* DMA Channel 11 X Count Register                                              */
418
#define DMA11_X_MODIFY                  0xFFC00ED4      /* DMA Channel 11 X Modify Register                                             */
419
#define DMA11_Y_COUNT                   0xFFC00ED8      /* DMA Channel 11 Y Count Register                                              */
420
#define DMA11_Y_MODIFY                  0xFFC00EDC      /* DMA Channel 11 Y Modify Register                                             */
421
#define DMA11_CURR_DESC_PTR             0xFFC00EE0      /* DMA Channel 11 Current Descriptor Pointer Register   */
422
#define DMA11_CURR_ADDR                 0xFFC00EE4      /* DMA Channel 11 Current Address Register                              */
423
#define DMA11_IRQ_STATUS                0xFFC00EE8      /* DMA Channel 11 Interrupt/Status Register                             */
424
#define DMA11_PERIPHERAL_MAP    0xFFC00EEC      /* DMA Channel 11 Peripheral Map Register                               */
425
#define DMA11_CURR_X_COUNT              0xFFC00EF0      /* DMA Channel 11 Current X Count Register                              */
426
#define DMA11_CURR_Y_COUNT              0xFFC00EF8      /* DMA Channel 11 Current Y Count Register                              */
427
 
428
#define MDMA_D0_NEXT_DESC_PTR   0xFFC00F00      /* MemDMA Stream 0 Destination Next Descriptor Pointer Register         */
429
#define MDMA_D0_START_ADDR              0xFFC00F04      /* MemDMA Stream 0 Destination Start Address Register                           */
430
#define MDMA_D0_CONFIG                  0xFFC00F08      /* MemDMA Stream 0 Destination Configuration Register                           */
431
#define MDMA_D0_X_COUNT                 0xFFC00F10      /* MemDMA Stream 0 Destination X Count Register                                         */
432
#define MDMA_D0_X_MODIFY                0xFFC00F14      /* MemDMA Stream 0 Destination X Modify Register                                        */
433
#define MDMA_D0_Y_COUNT                 0xFFC00F18      /* MemDMA Stream 0 Destination Y Count Register                                         */
434
#define MDMA_D0_Y_MODIFY                0xFFC00F1C      /* MemDMA Stream 0 Destination Y Modify Register                                        */
435
#define MDMA_D0_CURR_DESC_PTR   0xFFC00F20      /* MemDMA Stream 0 Destination Current Descriptor Pointer Register      */
436
#define MDMA_D0_CURR_ADDR               0xFFC00F24      /* MemDMA Stream 0 Destination Current Address Register                         */
437
#define MDMA_D0_IRQ_STATUS              0xFFC00F28      /* MemDMA Stream 0 Destination Interrupt/Status Register                        */
438
#define MDMA_D0_PERIPHERAL_MAP  0xFFC00F2C      /* MemDMA Stream 0 Destination Peripheral Map Register                          */
439
#define MDMA_D0_CURR_X_COUNT    0xFFC00F30      /* MemDMA Stream 0 Destination Current X Count Register                         */
440
#define MDMA_D0_CURR_Y_COUNT    0xFFC00F38      /* MemDMA Stream 0 Destination Current Y Count Register                         */
441
 
442
#define MDMA_S0_NEXT_DESC_PTR   0xFFC00F40      /* MemDMA Stream 0 Source Next Descriptor Pointer Register                      */
443
#define MDMA_S0_START_ADDR              0xFFC00F44      /* MemDMA Stream 0 Source Start Address Register                                        */
444
#define MDMA_S0_CONFIG                  0xFFC00F48      /* MemDMA Stream 0 Source Configuration Register                                        */
445
#define MDMA_S0_X_COUNT                 0xFFC00F50      /* MemDMA Stream 0 Source X Count Register                                                      */
446
#define MDMA_S0_X_MODIFY                0xFFC00F54      /* MemDMA Stream 0 Source X Modify Register                                                     */
447
#define MDMA_S0_Y_COUNT                 0xFFC00F58      /* MemDMA Stream 0 Source Y Count Register                                                      */
448
#define MDMA_S0_Y_MODIFY                0xFFC00F5C      /* MemDMA Stream 0 Source Y Modify Register                                                     */
449
#define MDMA_S0_CURR_DESC_PTR   0xFFC00F60      /* MemDMA Stream 0 Source Current Descriptor Pointer Register           */
450
#define MDMA_S0_CURR_ADDR               0xFFC00F64      /* MemDMA Stream 0 Source Current Address Register                                      */
451
#define MDMA_S0_IRQ_STATUS              0xFFC00F68      /* MemDMA Stream 0 Source Interrupt/Status Register                                     */
452
#define MDMA_S0_PERIPHERAL_MAP  0xFFC00F6C      /* MemDMA Stream 0 Source Peripheral Map Register                                       */
453
#define MDMA_S0_CURR_X_COUNT    0xFFC00F70      /* MemDMA Stream 0 Source Current X Count Register                                      */
454
#define MDMA_S0_CURR_Y_COUNT    0xFFC00F78      /* MemDMA Stream 0 Source Current Y Count Register                                      */
455
 
456
#define MDMA_D1_NEXT_DESC_PTR   0xFFC00F80      /* MemDMA Stream 1 Destination Next Descriptor Pointer Register         */
457
#define MDMA_D1_START_ADDR              0xFFC00F84      /* MemDMA Stream 1 Destination Start Address Register                           */
458
#define MDMA_D1_CONFIG                  0xFFC00F88      /* MemDMA Stream 1 Destination Configuration Register                           */
459
#define MDMA_D1_X_COUNT                 0xFFC00F90      /* MemDMA Stream 1 Destination X Count Register                                         */
460
#define MDMA_D1_X_MODIFY                0xFFC00F94      /* MemDMA Stream 1 Destination X Modify Register                                        */
461
#define MDMA_D1_Y_COUNT                 0xFFC00F98      /* MemDMA Stream 1 Destination Y Count Register                                         */
462
#define MDMA_D1_Y_MODIFY                0xFFC00F9C      /* MemDMA Stream 1 Destination Y Modify Register                                        */
463
#define MDMA_D1_CURR_DESC_PTR   0xFFC00FA0      /* MemDMA Stream 1 Destination Current Descriptor Pointer Register      */
464
#define MDMA_D1_CURR_ADDR               0xFFC00FA4      /* MemDMA Stream 1 Destination Current Address Register                         */
465
#define MDMA_D1_IRQ_STATUS              0xFFC00FA8      /* MemDMA Stream 1 Destination Interrupt/Status Register                        */
466
#define MDMA_D1_PERIPHERAL_MAP  0xFFC00FAC      /* MemDMA Stream 1 Destination Peripheral Map Register                          */
467
#define MDMA_D1_CURR_X_COUNT    0xFFC00FB0      /* MemDMA Stream 1 Destination Current X Count Register                         */
468
#define MDMA_D1_CURR_Y_COUNT    0xFFC00FB8      /* MemDMA Stream 1 Destination Current Y Count Register                         */
469
 
470
#define MDMA_S1_NEXT_DESC_PTR   0xFFC00FC0      /* MemDMA Stream 1 Source Next Descriptor Pointer Register                      */
471
#define MDMA_S1_START_ADDR              0xFFC00FC4      /* MemDMA Stream 1 Source Start Address Register                                        */
472
#define MDMA_S1_CONFIG                  0xFFC00FC8      /* MemDMA Stream 1 Source Configuration Register                                        */
473
#define MDMA_S1_X_COUNT                 0xFFC00FD0      /* MemDMA Stream 1 Source X Count Register                                                      */
474
#define MDMA_S1_X_MODIFY                0xFFC00FD4      /* MemDMA Stream 1 Source X Modify Register                                                     */
475
#define MDMA_S1_Y_COUNT                 0xFFC00FD8      /* MemDMA Stream 1 Source Y Count Register                                                      */
476
#define MDMA_S1_Y_MODIFY                0xFFC00FDC      /* MemDMA Stream 1 Source Y Modify Register                                                     */
477
#define MDMA_S1_CURR_DESC_PTR   0xFFC00FE0      /* MemDMA Stream 1 Source Current Descriptor Pointer Register           */
478
#define MDMA_S1_CURR_ADDR               0xFFC00FE4      /* MemDMA Stream 1 Source Current Address Register                                      */
479
#define MDMA_S1_IRQ_STATUS              0xFFC00FE8      /* MemDMA Stream 1 Source Interrupt/Status Register                                     */
480
#define MDMA_S1_PERIPHERAL_MAP  0xFFC00FEC      /* MemDMA Stream 1 Source Peripheral Map Register                                       */
481
#define MDMA_S1_CURR_X_COUNT    0xFFC00FF0      /* MemDMA Stream 1 Source Current X Count Register                                      */
482
#define MDMA_S1_CURR_Y_COUNT    0xFFC00FF8      /* MemDMA Stream 1 Source Current Y Count Register                                      */
483
 
484
 
485
/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF)                              */
486
#define PPI_CONTROL                     0xFFC01000      /* PPI Control Register                 */
487
#define PPI_STATUS                      0xFFC01004      /* PPI Status Register                  */
488
#define PPI_COUNT                       0xFFC01008      /* PPI Transfer Count Register  */
489
#define PPI_DELAY                       0xFFC0100C      /* PPI Delay Count Register             */
490
#define PPI_FRAME                       0xFFC01010      /* PPI Frame Length Register    */
491
 
492
 
493
/* Two-Wire Interface           (0xFFC01400 - 0xFFC014FF)                                                               */
494
#define TWI_CLKDIV                      0xFFC01400      /* Serial Clock Divider Register                        */
495
#define TWI_CONTROL                     0xFFC01404      /* TWI Control Register                                         */
496
#define TWI_SLAVE_CTL           0xFFC01408      /* Slave Mode Control Register                          */
497
#define TWI_SLAVE_STAT          0xFFC0140C      /* Slave Mode Status Register                           */
498
#define TWI_SLAVE_ADDR          0xFFC01410      /* Slave Mode Address Register                          */
499
#define TWI_MASTER_CTL          0xFFC01414      /* Master Mode Control Register                         */
500
#define TWI_MASTER_STAT         0xFFC01418      /* Master Mode Status Register                          */
501
#define TWI_MASTER_ADDR         0xFFC0141C      /* Master Mode Address Register                         */
502
#define TWI_INT_STAT            0xFFC01420      /* TWI Interrupt Status Register                        */
503
#define TWI_INT_MASK            0xFFC01424      /* TWI Master Interrupt Mask Register           */
504
#define TWI_FIFO_CTL            0xFFC01428      /* FIFO Control Register                                        */
505
#define TWI_FIFO_STAT           0xFFC0142C      /* FIFO Status Register                                         */
506
#define TWI_XMT_DATA8           0xFFC01480      /* FIFO Transmit Data Single Byte Register      */
507
#define TWI_XMT_DATA16          0xFFC01484      /* FIFO Transmit Data Double Byte Register      */
508
#define TWI_RCV_DATA8           0xFFC01488      /* FIFO Receive Data Single Byte Register       */
509
#define TWI_RCV_DATA16          0xFFC0148C      /* FIFO Receive Data Double Byte Register       */
510
 
511
 
512
/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)                                                                                         */
513
#define PORTGIO                                 0xFFC01500      /* Port G I/O Pin State Specify Register                                */
514
#define PORTGIO_CLEAR                   0xFFC01504      /* Port G I/O Peripheral Interrupt Clear Register               */
515
#define PORTGIO_SET                             0xFFC01508      /* Port G I/O Peripheral Interrupt Set Register                 */
516
#define PORTGIO_TOGGLE                  0xFFC0150C      /* Port G I/O Pin State Toggle Register                                 */
517
#define PORTGIO_MASKA                   0xFFC01510      /* Port G I/O Mask State Specify Interrupt A Register   */
518
#define PORTGIO_MASKA_CLEAR             0xFFC01514      /* Port G I/O Mask Disable Interrupt A Register                 */
519
#define PORTGIO_MASKA_SET               0xFFC01518      /* Port G I/O Mask Enable Interrupt A Register                  */
520
#define PORTGIO_MASKA_TOGGLE    0xFFC0151C      /* Port G I/O Mask Toggle Enable Interrupt A Register   */
521
#define PORTGIO_MASKB                   0xFFC01520      /* Port G I/O Mask State Specify Interrupt B Register   */
522
#define PORTGIO_MASKB_CLEAR             0xFFC01524      /* Port G I/O Mask Disable Interrupt B Register                 */
523
#define PORTGIO_MASKB_SET               0xFFC01528      /* Port G I/O Mask Enable Interrupt B Register                  */
524
#define PORTGIO_MASKB_TOGGLE    0xFFC0152C      /* Port G I/O Mask Toggle Enable Interrupt B Register   */
525
#define PORTGIO_DIR                             0xFFC01530      /* Port G I/O Direction Register                                                */
526
#define PORTGIO_POLAR                   0xFFC01534      /* Port G I/O Source Polarity Register                                  */
527
#define PORTGIO_EDGE                    0xFFC01538      /* Port G I/O Source Sensitivity Register                               */
528
#define PORTGIO_BOTH                    0xFFC0153C      /* Port G I/O Set on BOTH Edges Register                                */
529
#define PORTGIO_INEN                    0xFFC01540      /* Port G I/O Input Enable Register                                             */
530
 
531
 
532
/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF)                                                                                         */
533
#define PORTHIO                                 0xFFC01700      /* Port H I/O Pin State Specify Register                                */
534
#define PORTHIO_CLEAR                   0xFFC01704      /* Port H I/O Peripheral Interrupt Clear Register               */
535
#define PORTHIO_SET                             0xFFC01708      /* Port H I/O Peripheral Interrupt Set Register                 */
536
#define PORTHIO_TOGGLE                  0xFFC0170C      /* Port H I/O Pin State Toggle Register                                 */
537
#define PORTHIO_MASKA                   0xFFC01710      /* Port H I/O Mask State Specify Interrupt A Register   */
538
#define PORTHIO_MASKA_CLEAR             0xFFC01714      /* Port H I/O Mask Disable Interrupt A Register                 */
539
#define PORTHIO_MASKA_SET               0xFFC01718      /* Port H I/O Mask Enable Interrupt A Register                  */
540
#define PORTHIO_MASKA_TOGGLE    0xFFC0171C      /* Port H I/O Mask Toggle Enable Interrupt A Register   */
541
#define PORTHIO_MASKB                   0xFFC01720      /* Port H I/O Mask State Specify Interrupt B Register   */
542
#define PORTHIO_MASKB_CLEAR             0xFFC01724      /* Port H I/O Mask Disable Interrupt B Register                 */
543
#define PORTHIO_MASKB_SET               0xFFC01728      /* Port H I/O Mask Enable Interrupt B Register                  */
544
#define PORTHIO_MASKB_TOGGLE    0xFFC0172C      /* Port H I/O Mask Toggle Enable Interrupt B Register   */
545
#define PORTHIO_DIR                             0xFFC01730      /* Port H I/O Direction Register                                                */
546
#define PORTHIO_POLAR                   0xFFC01734      /* Port H I/O Source Polarity Register                                  */
547
#define PORTHIO_EDGE                    0xFFC01738      /* Port H I/O Source Sensitivity Register                               */
548
#define PORTHIO_BOTH                    0xFFC0173C      /* Port H I/O Set on BOTH Edges Register                                */
549
#define PORTHIO_INEN                    0xFFC01740      /* Port H I/O Input Enable Register                                             */
550
 
551
 
552
/* UART1 Controller             (0xFFC02000 - 0xFFC020FF)                                                               */
553
#define UART1_THR                       0xFFC02000      /* Transmit Holding register                    */
554
#define UART1_RBR                       0xFFC02000      /* Receive Buffer register                              */
555
#define UART1_DLL                       0xFFC02000      /* Divisor Latch (Low-Byte)                             */
556
#define UART1_IER                       0xFFC02004      /* Interrupt Enable Register                    */
557
#define UART1_DLH                       0xFFC02004      /* Divisor Latch (High-Byte)                    */
558
#define UART1_IIR                       0xFFC02008      /* Interrupt Identification Register    */
559
#define UART1_LCR                       0xFFC0200C      /* Line Control Register                                */
560
#define UART1_MCR                       0xFFC02010      /* Modem Control Register                               */
561
#define UART1_LSR                       0xFFC02014      /* Line Status Register                                 */
562
#define UART1_MSR                       0xFFC02018      /* Modem Status Register                                */
563
#define UART1_SCR                       0xFFC0201C      /* SCR Scratch Register                                 */
564
#define UART1_GCTL                      0xFFC02024      /* Global Control Register                              */
565
 
566
 
567
/* Omit CAN register sets from the defBF534.h (CAN is not in the ADSP-BF52x processor) */
568
 
569
/* Pin Control Registers        (0xFFC03200 - 0xFFC032FF)                                                                                       */
570
#define PORTF_FER                       0xFFC03200      /* Port F Function Enable Register (Alternate/Flag*)    */
571
#define PORTG_FER                       0xFFC03204      /* Port G Function Enable Register (Alternate/Flag*)    */
572
#define PORTH_FER                       0xFFC03208      /* Port H Function Enable Register (Alternate/Flag*)    */
573
 
574
 
575
/* Handshake MDMA Registers     (0xFFC03300 - 0xFFC033FF)                                                                               */
576
#define HMDMA0_CONTROL          0xFFC03300      /* Handshake MDMA0 Control Register                                     */
577
#define HMDMA0_ECINIT           0xFFC03304      /* HMDMA0 Initial Edge Count Register                           */
578
#define HMDMA0_BCINIT           0xFFC03308      /* HMDMA0 Initial Block Count Register                          */
579
#define HMDMA0_ECURGENT         0xFFC0330C      /* HMDMA0 Urgent Edge Count Threshhold Register         */
580
#define HMDMA0_ECOVERFLOW       0xFFC03310      /* HMDMA0 Edge Count Overflow Interrupt Register        */
581
#define HMDMA0_ECOUNT           0xFFC03314      /* HMDMA0 Current Edge Count Register                           */
582
#define HMDMA0_BCOUNT           0xFFC03318      /* HMDMA0 Current Block Count Register                          */
583
 
584
#define HMDMA1_CONTROL          0xFFC03340      /* Handshake MDMA1 Control Register                                     */
585
#define HMDMA1_ECINIT           0xFFC03344      /* HMDMA1 Initial Edge Count Register                           */
586
#define HMDMA1_BCINIT           0xFFC03348      /* HMDMA1 Initial Block Count Register                          */
587
#define HMDMA1_ECURGENT         0xFFC0334C      /* HMDMA1 Urgent Edge Count Threshhold Register         */
588
#define HMDMA1_ECOVERFLOW       0xFFC03350      /* HMDMA1 Edge Count Overflow Interrupt Register        */
589
#define HMDMA1_ECOUNT           0xFFC03354      /* HMDMA1 Current Edge Count Register                           */
590
#define HMDMA1_BCOUNT           0xFFC03358      /* HMDMA1 Current Block Count Register                          */
591
 
592
/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
593
#define PORTF_MUX               0xFFC03210      /* Port F mux control */
594
#define PORTG_MUX               0xFFC03214      /* Port G mux control */
595
#define PORTH_MUX               0xFFC03218      /* Port H mux control */
596
#define PORTF_DRIVE             0xFFC03220      /* Port F drive strength control */
597
#define PORTG_DRIVE             0xFFC03224      /* Port G drive strength control */
598
#define PORTH_DRIVE             0xFFC03228      /* Port H drive strength control */
599
#define PORTF_SLEW              0xFFC03230      /* Port F slew control */
600
#define PORTG_SLEW              0xFFC03234      /* Port G slew control */
601
#define PORTH_SLEW              0xFFC03238      /* Port H slew control */
602
#define PORTF_HYSTERESIS        0xFFC03240      /* Port F Schmitt trigger control */
603
#define PORTG_HYSTERESIS        0xFFC03244      /* Port G Schmitt trigger control */
604
#define PORTH_HYSTERESIS        0xFFC03248      /* Port H Schmitt trigger control */
605
#define NONGPIO_DRIVE           0xFFC03280      /* Drive strength control for non-GPIO pins */
606
#define NONGPIO_SLEW            0xFFC03284      /* Slew control for non-GPIO pins */
607
#define NONGPIO_HYSTERESIS      0xFFC03288      /* Schmitt trigger control for non-GPIO pins */
608
 
609
/***********************************************************************************
610
** System MMR Register Bits And Macros
611
**
612
** Disclaimer:  All macros are intended to make C and Assembly code more readable.
613
**                              Use these macros carefully, as any that do left shifts for field
614
**                              depositing will result in the lower order bits being destroyed.  Any
615
**                              macro that shifts left to properly position the bit-field should be
616
**                              used as part of an OR to initialize a register and NOT as a dynamic
617
**                              modifier UNLESS the lower order bits are saved and ORed back in when
618
**                              the macro is used.
619
*************************************************************************************/
620
/*
621
** ********************* PLL AND RESET MASKS ****************************************/
622
/* PLL_CTL Masks                                                                                                                                        */
623
#define DF                              0x0001  /* 0: PLL = CLKIN, 1: PLL = CLKIN/2                                     */
624
#define PLL_OFF                 0x0002  /* PLL Not Powered                                                                      */
625
#define STOPCK                  0x0008  /* Core Clock Off                                                                       */
626
#define PDWN                    0x0020  /* Enter Deep Sleep Mode                                                        */
627
#define IN_DELAY                0x0040  /* Add 200ps Delay To EBIU Input Latches                        */
628
#define OUT_DELAY               0x0080  /* Add 200ps Delay To EBIU Output Signals                       */
629
#define BYPASS                  0x0100  /* Bypass the PLL                                                                       */
630
#define MSEL                    0x7E00  /* Multiplier Select For CCLK/VCO Factors                       */
631
/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits)                       */
632
#define SET_MSEL(x)             (((x)&0x3F) << 0x9)     /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL         */
633
 
634
/* PLL_DIV Masks                                                                                                                */
635
#define SSEL                    0x000F  /* System Select                                                */
636
#define CSEL                    0x0030  /* Core Select                                                  */
637
#define CSEL_DIV1               0x0000  /*              CCLK = VCO / 1                                  */
638
#define CSEL_DIV2               0x0010  /*              CCLK = VCO / 2                                  */
639
#define CSEL_DIV4               0x0020  /*              CCLK = VCO / 4                                  */
640
#define CSEL_DIV8               0x0030  /*              CCLK = VCO / 8                                  */
641
/* PLL_DIV Macros                                                                                                               */
642
#define SET_SSEL(x)             ((x)&0xF)               /* Set SSEL = 0-15 --> SCLK = VCO/SSEL  */
643
 
644
/* VR_CTL Masks                                                                                                                                 */
645
#define FREQ                    0x3000  /* Switching Oscillator Frequency For Regulator */
646
#define HIBERNATE               0x0000  /*              Powerdown/Bypass On-Board Regulation    */
647
 
648
#define VLEV                    0x00F0  /* Internal Voltage Level - Only Program Values Within Specifications */
649
#define VLEV_085                0x0040  /*      VLEV = 0.85 V (See Datasheet for Regulator Tolerance)   */
650
#define VLEV_090                0x0050  /*      VLEV = 0.90 V (See Datasheet for Regulator Tolerance)   */
651
#define VLEV_095                0x0060  /*      VLEV = 0.95 V (See Datasheet for Regulator Tolerance)   */
652
#define VLEV_100                0x0070  /*      VLEV = 1.00 V (See Datasheet for Regulator Tolerance)   */
653
#define VLEV_105                0x0080  /*      VLEV = 1.05 V (See Datasheet for Regulator Tolerance)   */
654
#define VLEV_110                0x0090  /*      VLEV = 1.10 V (See Datasheet for Regulator Tolerance)   */
655
#define VLEV_115                0x00A0  /*      VLEV = 1.15 V (See Datasheet for Regulator Tolerance)   */
656
#define VLEV_120                0x00B0  /*      VLEV = 1.20 V (See Datasheet for Regulator Tolerance)   */
657
 
658
#define WAKE                    0x0100  /* Enable RTC/Reset Wakeup From Hibernate       */
659
#define USBWE                   0x0200  /* Enable USB Wakeup From Hibernate                     */
660
#define PHYWE                   0x0400  /* Enable PHY Wakeup From Hibernate                     */
661
#define CLKBUFOE                0x4000  /* CLKIN Buffer Output Enable */
662
#define PHYCLKOE                CLKBUFOE        /* Alternative legacy name for the above */
663
#define SCKELOW                 0x8000  /* Enable Drive CKE Low During Reset            */
664
 
665
/* PLL_STAT Masks                                                                                                                                       */
666
#define ACTIVE_PLLENABLED       0x0001  /* Processor In Active Mode With PLL Enabled    */
667
#define FULL_ON                         0x0002  /* Processor In Full On Mode                                    */
668
#define ACTIVE_PLLDISABLED      0x0004  /* Processor In Active Mode With PLL Disabled   */
669
#define PLL_LOCKED                      0x0020  /* PLL_LOCKCNT Has Been Reached                                 */
670
 
671
/* SWRST Masks                                                                                                                                          */
672
#define SYSTEM_RESET            0x0007  /* Initiates A System Software Reset                    */
673
#define DOUBLE_FAULT            0x0008  /* Core Double Fault Causes Reset                               */
674
#define RESET_DOUBLE            0x2000  /* SW Reset Generated By Core Double-Fault              */
675
#define RESET_WDOG                      0x4000  /* SW Reset Generated By Watchdog Timer                 */
676
#define RESET_SOFTWARE          0x8000  /* SW Reset Occurred Since Last Read Of SWRST   */
677
 
678
/* SYSCR Masks                                                                                                                                                          */
679
#define BMODE                           0x0007  /* Boot Mode - Latched During HW Reset From Mode Pins   */
680
#define NOBOOT                          0x0010  /* Execute From L1 or ASYNC Bank 0 When BMODE = 0               */
681
 
682
/* *************  SYSTEM INTERRUPT CONTROLLER MASKS *************************************/
683
/* Peripheral Masks For SIC_ISR0, SIC_IWR0, SIC_IMASK0                                                                          */
684
#define IRQ_PLL_WAKEUP  0x00000001      /* PLL Wakeup Interrupt                                                         */
685
 
686
#define IRQ_DMA_ERR0   0x00000002  /* Error Interrupt (DMA error 0 interrupt (generic)) */
687
#define IRQ_DMAR0      0x00000004  /* DMAR0 Block (DMAR0 block interrupt)                               */
688
#define IRQ_DMAR1      0x00000008  /* DMAR1 Block  (DMAR1 block interrupt)                              */
689
#define IRQ_DMAR0_ERR  0x00000010  /* Error Interrupt (DMAR0 overflow error interrupt)  */
690
#define IRQ_DMAR1_ERR  0x00000020  /* Error Interrupt (DMAR1 overflow error interrupt)  */
691
#define IRQ_PPI_ERR    0x00000040  /* Error Interrupt (PPI error interrupt)                     */
692
#define IRQ_MAC_ERR    0x00000080  /* Error Interrupt (MAC status interrupt)                    */
693
#define IRQ_SPORT0_ERR 0x00000100  /* Error Interrupt (SPORT0 status interrupt)                 */
694
#define IRQ_SPORT1_ERR 0x00000200  /* Error Interrupt (SPORT1 status interrupt)                 */
695
#define IRQ_UART0_ERR  0x00001000  /* Error Interrupt (UART0 status interrupt)                  */
696
#define IRQ_UART1_ERR  0x00002000  /* Error Interrupt (UART1 status interrupt)                  */
697
#define IRQ_RTC            0x00004000  /* Real Time Clock Interrupt                                             */
698
#define IRQ_DMA0           0x00008000  /* DMA channel 0 (PPI/NFC) Interrupt                             */
699
#define IRQ_DMA3           0x00010000  /* DMA Channel 3 (SPORT0 RX) Interrupt                           */
700
#define IRQ_DMA4           0x00020000  /* DMA Channel 4 (SPORT0 TX) Interrupt                           */
701
#define IRQ_DMA5           0x00040000  /* DMA Channel 5 (SPORT1 RX) Interrupt                           */
702
#define IRQ_DMA6           0x00080000  /* DMA Channel 6 (SPORT1 TX) Interrupt                           */
703
#define IRQ_TWI            0x00100000  /* TWI Interrupt                                                                         */
704
#define IRQ_DMA7           0x00200000  /* DMA Channel 7 (SPI) Interrupt                                         */
705
#define IRQ_DMA8           0x00400000  /* DMA Channel 8 (UART0 RX) Interrupt                            */
706
#define IRQ_DMA9           0x00800000  /* DMA Channel 9 (UART0 TX) Interrupt                            */
707
#define IRQ_DMA10          0x01000000  /* DMA Channel 10 (UART1 RX) Interrupt                           */
708
#define IRQ_DMA11          0x02000000  /* DMA Channel 11 (UART1 TX) Interrupt                           */
709
#define IRQ_OTP    0x04000000  /* OTP Interrupt                                                                         */
710
#define IRQ_CNT            0x08000000  /* GP Counter Interrupt                                                          */
711
#define IRQ_DMA1           0x10000000  /* DMA Channel 1 (EthernetRX/HOSTDP) Interrupt           */
712
#define IRQ_PFA_PORTH  0x20000000  /* PF Port H Interrupt A                                                     */
713
#define IRQ_DMA2           0x40000000  /* DMA Channel 2 (Ethernet TX/NFC) Interrupt             */
714
#define IRQ_PFB_PORTH  0x80000000  /* PF Port H  Interrupt B                                                    */
715
 
716
/* Peripheral Masks For SIC_ISR1, SIC_IWR1, SIC_IMASK1                                                                  */
717
 
718
#define IRQ_TIMER0              0x00000001      /* Timer 0 Interrupt                                                            */
719
#define IRQ_TIMER1              0x00000002      /* Timer 1 Interrupt                                                            */
720
#define IRQ_TIMER2              0x00000004      /* Timer 2 Interrupt                                                            */
721
#define IRQ_TIMER3              0x00000008      /* Timer 3 Interrupt                                                            */
722
#define IRQ_TIMER4              0x00000010      /* Timer 4 Interrupt                                                            */
723
#define IRQ_TIMER5              0x00000020      /* Timer 5 Interrupt                                                            */
724
#define IRQ_TIMER6              0x00000040      /* Timer 6 Interrupt                                                            */
725
#define IRQ_TIMER7              0x00000080      /* Timer 7 Interrupt                                                            */
726
#define IRQ_PFA_PORTG   0x00000100      /* PF Port G Interrupt A                                                        */
727
#define IRQ_PFB_PORTG   0x00000200      /* PF Port G Interrupt B                                                        */
728
#define IRQ_DMA12               0x00000400      /* DMA Channels 12 (MDMA0 Destination) TX Interrupt     */
729
#define IRQ_DMA13               0x00000400      /* DMA Channels 13 (MDMA0 Source) RX Interrupt          */
730
#define IRQ_DMA14               0x00000800      /* DMA Channels 14 (MDMA1 Destination) TX Interrupt     */
731
#define IRQ_DMA15               0x00000800      /* DMA Channels 15 (MDMA1 Source) RX Interrupt          */
732
#define IRQ_WDOG                0x00001000      /* Software Watchdog Timer Interrupt                            */
733
#define IRQ_PFA_PORTF   0x00002000      /* PF Port F Interrupt A                                                        */
734
#define IRQ_PFB_PORTF   0x00004000      /* PF Port F Interrupt B                                                        */
735
#define IRQ_SPI_ERR     0x00008000  /* Error Interrupt (SPI status interrupt)                   */
736
#define IRQ_NAND_ERR    0x00010000      /* NAND error interrupt                                                         */
737
#define IRQ_HOSTDP_STATUS       0x00020000      /* HOSTDP status interrupt  */
738
#define IRQ_HOSTRD_DONE 0x00040000              /* Host Read Done interrupt */
739
#define IRQ_USB_EINT    0x00080000      /* USB EINT interrupt                                                           */
740
#define IRQ_USB_INT0    0x00100000      /* USB INT0 interrupt                                                           */
741
#define IRQ_USB_INT1    0x00200000      /* USB INT1 interrupt                                                           */
742
#define IRQ_USB_INT2    0x00400000      /* USB INT1 interrupt                                                           */
743
#define IRQ_USB_DMAINT  0x00800000      /* USB DMAINT interrupt                                                         */
744
 
745
 
746
/* SIC_IAR0 Macros                                                                                                                      */
747
#define P0_IVG(x)               (((x)&0xF)-7)                   /* Peripheral #0 assigned IVG #x        */
748
#define P1_IVG(x)               (((x)&0xF)-7) << 0x4    /* Peripheral #1 assigned IVG #x        */
749
#define P2_IVG(x)               (((x)&0xF)-7) << 0x8    /* Peripheral #2 assigned IVG #x        */
750
#define P3_IVG(x)               (((x)&0xF)-7) << 0xC    /* Peripheral #3 assigned IVG #x        */
751
#define P4_IVG(x)               (((x)&0xF)-7) << 0x10   /* Peripheral #4 assigned IVG #x        */
752
#define P5_IVG(x)               (((x)&0xF)-7) << 0x14   /* Peripheral #5 assigned IVG #x        */
753
#define P6_IVG(x)               (((x)&0xF)-7) << 0x18   /* Peripheral #6 assigned IVG #x        */
754
#define P7_IVG(x)               (((x)&0xF)-7) << 0x1C   /* Peripheral #7 assigned IVG #x        */
755
 
756
/* SIC_IAR1 Macros                                                                                                                      */
757
#define P8_IVG(x)               (((x)&0xF)-7)                   /* Peripheral #8 assigned IVG #x        */
758
#define P9_IVG(x)               (((x)&0xF)-7) << 0x4    /* Peripheral #9 assigned IVG #x        */
759
#define P10_IVG(x)              (((x)&0xF)-7) << 0x10   /* Peripheral #10 assigned IVG #x       */
760
#define P11_IVG(x)              (((x)&0xF)-7) << 0x14   /* Peripheral #11 assigned IVG #x       */
761
#define P12_IVG(x)              (((x)&0xF)-7) << 0x18   /* Peripheral #12 assigned IVG #x       */
762
#define P13_IVG(x)              (((x)&0xF)-7) << 0x1C   /* Peripheral #13 assigned IVG #x       */
763
 
764
/* SIC_IAR2 Macros                                                                                                                      */
765
#define P14_IVG(x)              (((x)&0xF)-7)                   /* Peripheral #14 assigned IVG #x       */
766
#define P15_IVG(x)              (((x)&0xF)-7) << 0x4    /* Peripheral #15 assigned IVG #x       */
767
#define P16_IVG(x)              (((x)&0xF)-7) << 0x8    /* Peripheral #16 assigned IVG #x       */
768
#define P17_IVG(x)              (((x)&0xF)-7) << 0xC    /* Peripheral #17 assigned IVG #x       */
769
#define P18_IVG(x)              (((x)&0xF)-7) << 0x10   /* Peripheral #18 assigned IVG #x       */
770
#define P19_IVG(x)              (((x)&0xF)-7) << 0x14   /* Peripheral #19 assigned IVG #x       */
771
#define P20_IVG(x)              (((x)&0xF)-7) << 0x18   /* Peripheral #20 assigned IVG #x       */
772
#define P21_IVG(x)              (((x)&0xF)-7) << 0x1C   /* Peripheral #21 assigned IVG #x       */
773
 
774
/* SIC_IAR3 Macros                                                                                                                      */
775
#define P22_IVG(x)              (((x)&0xF)-7)                   /* Peripheral #22 assigned IVG #x       */
776
#define P23_IVG(x)              (((x)&0xF)-7) << 0x4    /* Peripheral #23 assigned IVG #x       */
777
#define P24_IVG(x)              (((x)&0xF)-7) << 0x8    /* Peripheral #24 assigned IVG #x       */
778
#define P25_IVG(x)              (((x)&0xF)-7) << 0xC    /* Peripheral #25 assigned IVG #x       */
779
#define P26_IVG(x)              (((x)&0xF)-7) << 0x10   /* Peripheral #26 assigned IVG #x       */
780
#define P27_IVG(x)              (((x)&0xF)-7) << 0x14   /* Peripheral #27 assigned IVG #x       */
781
#define P28_IVG(x)              (((x)&0xF)-7) << 0x18   /* Peripheral #28 assigned IVG #x       */
782
#define P29_IVG(x)              (((x)&0xF)-7) << 0x1C   /* Peripheral #29 assigned IVG #x       */
783
 
784
/* SIC_IAR4 Macros                                                                                                                      */
785
#define P30_IVG(x)              (((x)&0xF)-7)                   /* Peripheral #30 assigned IVG #x       */
786
#define P31_IVG(x)              (((x)&0xF)-7) << 0x4    /* Peripheral #31 assigned IVG #x       */
787
#define P32_IVG(x)              (((x)&0xF)-7) << 0x8    /* Peripheral #32 assigned IVG #x       */
788
#define P33_IVG(x)              (((x)&0xF)-7) << 0xC    /* Peripheral #33 assigned IVG #x       */
789
#define P34_IVG(x)              (((x)&0xF)-7) << 0x10   /* Peripheral #34 assigned IVG #x       */
790
#define P35_IVG(x)              (((x)&0xF)-7) << 0x14   /* Peripheral #35 assigned IVG #x       */
791
#define P36_IVG(x)              (((x)&0xF)-7) << 0x18   /* Peripheral #36 assigned IVG #x       */
792
#define P37_IVG(x)              (((x)&0xF)-7) << 0x1C   /* Peripheral #37 assigned IVG #x       */
793
 
794
/* SIC_IAR5 Macros                                                                                                                      */
795
#define P38_IVG(x)              (((x)&0xF)-7)                   /* Peripheral #38assigned IVG #x        */
796
#define P39_IVG(x)              (((x)&0xF)-7) << 0x4    /* Peripheral #39assigned IVG #x        */
797
#define P40_IVG(x)              (((x)&0xF)-7) << 0x8    /* Peripheral #40 assigned IVG #x       */
798
#define P41_IVG(x)              (((x)&0xF)-7) << 0xC    /* Peripheral #41 assigned IVG #x       */
799
#define P42_IVG(x)              (((x)&0xF)-7) << 0x10   /* Peripheral #42 assigned IVG #x       */
800
#define P43_IVG(x)              (((x)&0xF)-7) << 0x14   /* Peripheral #43 assigned IVG #x       */
801
#define P44_IVG(x)              (((x)&0xF)-7) << 0x18   /* Peripheral #44 assigned IVG #x       */
802
#define P45_IVG(x)              (((x)&0xF)-7) << 0x1C   /* Peripheral #45 assigned IVG #x       */
803
 
804
/* SIC_IAR6 Macros                                                                                                                      */
805
#define P46_IVG(x)              (((x)&0xF)-7)                   /* Peripheral #46 assigned IVG #x       */
806
#define P47_IVG(x)              (((x)&0xF)-7) << 0x4    /* Peripheral #47 assigned IVG #x       */
807
#define P48_IVG(x)              (((x)&0xF)-7) << 0x8    /* Peripheral #48 assigned IVG #x       */
808
#define P49_IVG(x)              (((x)&0xF)-7) << 0xC    /* Peripheral #49 assigned IVG #x       */
809
#define P50_IVG(x)              (((x)&0xF)-7) << 0x10   /* Peripheral #50 assigned IVG #x       */
810
#define P51_IVG(x)              (((x)&0xF)-7) << 0x14   /* Peripheral #51 assigned IVG #x       */
811
#define P52_IVG(x)              (((x)&0xF)-7) << 0x18   /* Peripheral #52 assigned IVG #x       */
812
#define P53_IVG(x)              (((x)&0xF)-7) << 0x1C   /* Peripheral #53 assigned IVG #x       */
813
 
814
/* SIC_IAR7 Macros                                                                                                                      */
815
#define P54_IVG(x)              (((x)&0xF)-7)                   /* Peripheral #54 assigned IVG #x       */
816
#define P55_IVG(x)              (((x)&0xF)-7) << 0x4    /* Peripheral #55 assigned IVG #x       */
817
#define P56_IVG(x)              (((x)&0xF)-7) << 0x8    /* Peripheral #56 assigned IVG #x       */
818
#define P57_IVG(x)              (((x)&0xF)-7) << 0xC    /* Peripheral #57 assigned IVG #x       */
819
#define P58_IVG(x)              (((x)&0xF)-7) << 0x10   /* Peripheral #58 assigned IVG #x       */
820
#define P59_IVG(x)              (((x)&0xF)-7) << 0x14   /* Peripheral #59 assigned IVG #x       */
821
#define P60_IVG(x)              (((x)&0xF)-7) << 0x18   /* Peripheral #60 assigned IVG #x       */
822
#define P61_IVG(x)              (((x)&0xF)-7) << 0x1C   /* Peripheral #61 assigned IVG #x       */
823
 
824
/* SIC_IMASK0 Masks                                                                                                                                             */
825
#define SIC_UNMASK0_ALL 0x00000000                                      /* Unmask all peripheral interrupts     */
826
#define SIC_MASK0_ALL   0xFFFFF3FF                                      /* Mask all peripheral interrupts       */
827
#define SIC_MASK0(x)    (1 << ((x)&0x1F))                                       /* Mask Peripheral #x interrupt         */
828
#define SIC_UNMASK0(x)  (0xFFFFFFFF ^ (1 << ((x)&0x1F)))        /* Unmask Peripheral #x interrupt       */
829
 
830
/* SIC_IMASK1 Masks                                                                                                                                             */
831
#define SIC_UNMASK1_ALL 0x00000000                                      /* Unmask all peripheral interrupts     */
832
#define SIC_MASK1_ALL   0xFFFFFF                                        /* Mask all peripheral interrupts       */
833
#define SIC_MASK1(x)    (1 << ((x)&0x1F))                                       /* Mask Peripheral #x interrupt         */
834
#define SIC_UNMASK1(x)  (0xFFFFFFFF ^ (1 << ((x)&0x1F)))        /* Unmask Peripheral #x interrupt       */
835
 
836
 
837
/* SIC_IWR0 Masks                                                                                                                                               */
838
#define IWR0_DISABLE_ALL        0x00000000                                      /* Wakeup Disable all peripherals       */
839
#define IWR0_ENABLE_ALL 0xFFFFF3FF                                      /* Wakeup Enable all peripherals        */
840
#define IWR0_ENABLE(x)  (1 << ((x)&0x1F))                                       /* Wakeup Enable Peripheral #x          */
841
#define IWR0_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F)))        /* Wakeup Disable Peripheral #x         */
842
 
843
/* SIC_IWR1 Masks                                                                                                                                               */
844
#define IWR1_DISABLE_ALL        0x00000000                                      /* Wakeup Disable all peripherals       */
845
#define IWR1_ENABLE_ALL 0xFFFFFF                                        /* Wakeup Enable all peripherals        */
846
#define IWR1_ENABLE(x)  (1 << ((x)&0x1F))                                       /* Wakeup Enable Peripheral #x          */
847
#define IWR1_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F)))        /* Wakeup Disable Peripheral #x         */
848
 
849
 
850
/* ********* WATCHDOG TIMER MASKS ******************** */
851
 
852
/* Watchdog Timer WDOG_CTL Register Masks */
853
 
854
#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */
855
#define WDEV_RESET 0x0000 /* generate reset event on roll over */
856
#define WDEV_NMI 0x0002 /* generate NMI event on roll over */
857
#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */
858
#define WDEV_NONE 0x0006 /* no event on roll over */
859
#define WDEN 0x0FF0 /* enable watchdog */
860
#define WDDIS 0x0AD0 /* disable watchdog */
861
#define WDRO 0x8000 /* watchdog rolled over latch */
862
 
863
/* depreciated WDOG_CTL Register Masks for legacy code */
864
 
865
 
866
#define ICTL WDEV
867
#define ENABLE_RESET WDEV_RESET
868
#define WDOG_RESET WDEV_RESET
869
#define ENABLE_NMI WDEV_NMI
870
#define WDOG_NMI WDEV_NMI
871
#define ENABLE_GPI WDEV_GPI
872
#define WDOG_GPI WDEV_GPI
873
#define DISABLE_EVT WDEV_NONE
874
#define WDOG_NONE WDEV_NONE
875
 
876
#define TMR_EN WDEN
877
#define TMR_DIS WDDIS
878
#define TRO WDRO
879
#define ICTL_P0 0x01
880
 #define ICTL_P1 0x02
881
#define TRO_P 0x0F
882
 
883
 
884
 
885
/* ***************  REAL TIME CLOCK MASKS  **************************/
886
/* RTC_STAT and RTC_ALARM Masks                                                                         */
887
#define RTC_SEC                         0x0000003F      /* Real-Time Clock Seconds      */
888
#define RTC_MIN                         0x00000FC0      /* Real-Time Clock Minutes      */
889
#define RTC_HR                          0x0001F000      /* Real-Time Clock Hours        */
890
#define RTC_DAY                         0xFFFE0000      /* Real-Time Clock Days         */
891
 
892
/* RTC_ALARM Macro                      z=day           y=hr    x=min   w=sec           */
893
#define SET_ALARM(z,y,x,w)      ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F))
894
 
895
/* RTC_ICTL and RTC_ISTAT Masks                                                                                                                                         */
896
#define STOPWATCH                       0x0001          /* Stopwatch Interrupt Enable                                                           */
897
#define ALARM                           0x0002          /* Alarm Interrupt Enable                                                                       */
898
#define SECOND                          0x0004          /* Seconds (1 Hz) Interrupt Enable                                                      */
899
#define MINUTE                          0x0008          /* Minutes Interrupt Enable                                                                     */
900
#define HOUR                            0x0010          /* Hours Interrupt Enable                                                                       */
901
#define DAY                                     0x0020          /* 24 Hours (Days) Interrupt Enable                                                     */
902
#define DAY_ALARM                       0x0040          /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable       */
903
#define WRITE_PENDING           0x4000          /* Write Pending Status                                                                         */
904
#define WRITE_COMPLETE          0x8000          /* Write Complete Interrupt Enable                                                      */
905
 
906
/* RTC_FAST / RTC_PREN Mask                                                                                             */
907
#define PREN                            0x0001  /* Enable Prescaler, RTC Runs @1 Hz     */
908
 
909
 
910
/* ************** UART CONTROLLER MASKS *************************/
911
/* UARTx_LCR Masks                                                                                              */
912
#define WLS(x)          (((x)-5) & 0x03)        /* Word Length Select */
913
#define STB                     0x04                            /* Stop Bits                    */
914
#define PEN                     0x08                            /* Parity Enable                */
915
#define EPS                     0x10                            /* Even Parity Select   */
916
#define STP                     0x20                            /* Stick Parity                 */
917
#define SB                      0x40                            /* Set Break                    */
918
#define DLAB            0x80                            /* Divisor Latch Access */
919
 
920
/* UARTx_MCR Mask                                                                               */
921
#define LOOP_ENA        0x10    /* Loopback Mode Enable */
922
#define LOOP_ENA_P      0x04
923
 
924
/* UARTx_LSR Masks                                                                              */
925
#define DR                      0x01    /* Data Ready                           */
926
#define OE                      0x02    /* Overrun Error                        */
927
#define PE                      0x04    /* Parity Error                         */
928
#define FE                      0x08    /* Framing Error                        */
929
#define BI                      0x10    /* Break Interrupt                      */
930
#define THRE            0x20    /* THR Empty                            */
931
#define TEMT            0x40    /* TSR and UART_THR Empty       */
932
 
933
/* UARTx_IER Masks                                                                                                                      */
934
#define ERBFI           0x01            /* Enable Receive Buffer Full Interrupt         */
935
#define ETBEI           0x02            /* Enable Transmit Buffer Empty Interrupt       */
936
#define ELSI            0x04            /* Enable RX Status Interrupt                           */
937
 
938
/* UARTx_IIR Masks                                                                                                              */
939
#define NINT            0x01            /* Pending Interrupt                                    */
940
#define STATUS          0x06            /* Highest Priority Pending Interrupt   */
941
 
942
/* UARTx_GCTL Masks                                                                                                     */
943
#define UCEN            0x01            /* Enable UARTx Clocks                          */
944
#define IREN            0x02            /* Enable IrDA Mode                                     */
945
#define TPOLC           0x04            /* IrDA TX Polarity Change                      */
946
#define RPOLC           0x08            /* IrDA RX Polarity Change                      */
947
#define FPE                     0x10            /* Force Parity Error On Transmit       */
948
#define FFE                     0x20            /* Force Framing Error On Transmit      */
949
 
950
 
951
/* ***********  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  ****************************/
952
/* SPI_CTL Masks                                                                                                                                        */
953
#define TIMOD           0x0003          /* Transfer Initiate Mode                                                       */
954
#define RDBR_CORE       0x0000          /*              RDBR Read Initiates, IRQ When RDBR Full         */
955
#define TDBR_CORE       0x0001          /*              TDBR Write Initiates, IRQ When TDBR Empty       */
956
#define RDBR_DMA        0x0002          /*              DMA Read, DMA Until FIFO Empty                          */
957
#define TDBR_DMA        0x0003          /*              DMA Write, DMA Until FIFO Full                          */
958
#define SZ                      0x0004          /* Send Zero (When TDBR Empty, Send Zero/Last*)         */
959
#define GM                      0x0008          /* Get More (When RDBR Full, Overwrite/Discard*)        */
960
#define PSSE            0x0010          /* Slave-Select Input Enable                                            */
961
#define EMISO           0x0020          /* Enable MISO As Output                                                        */
962
#define SIZE            0x0100          /* Size of Words (16/8* Bits)                                           */
963
#define LSBF            0x0200          /* LSB First                                                                            */
964
#define CPHA            0x0400          /* Clock Phase                                                                          */
965
#define CPOL            0x0800          /* Clock Polarity                                                                       */
966
#define MSTR            0x1000          /* Master/Slave*                                                                        */
967
#define WOM                     0x2000          /* Write Open Drain Master                                                      */
968
#define SPE                     0x4000          /* SPI Enable                                                                           */
969
 
970
/* SPI_FLG Masks                                                                                                                                        */
971
#define FLS1            0x0002          /* Enables SPI_FLOUT1 as SPI Slave-Select Output        */
972
#define FLS2            0x0004          /* Enables SPI_FLOUT2 as SPI Slave-Select Output        */
973
#define FLS3            0x0008          /* Enables SPI_FLOUT3 as SPI Slave-Select Output        */
974
#define FLS4            0x0010          /* Enables SPI_FLOUT4 as SPI Slave-Select Output        */
975
#define FLS5            0x0020          /* Enables SPI_FLOUT5 as SPI Slave-Select Output        */
976
#define FLS6            0x0040          /* Enables SPI_FLOUT6 as SPI Slave-Select Output        */
977
#define FLS7            0x0080          /* Enables SPI_FLOUT7 as SPI Slave-Select Output        */
978
#define FLG1            0xFDFF          /* Activates SPI_FLOUT1                                                         */
979
#define FLG2            0xFBFF          /* Activates SPI_FLOUT2                                                         */
980
#define FLG3            0xF7FF          /* Activates SPI_FLOUT3                                                         */
981
#define FLG4            0xEFFF          /* Activates SPI_FLOUT4                                                         */
982
#define FLG5            0xDFFF          /* Activates SPI_FLOUT5                                                         */
983
#define FLG6            0xBFFF          /* Activates SPI_FLOUT6                                                         */
984
#define FLG7            0x7FFF          /* Activates SPI_FLOUT7                                                         */
985
 
986
/* SPI_STAT Masks                                                                                                                                                               */
987
#define SPIF            0x0001          /* SPI Finished (Single-Word Transfer Complete)                                 */
988
#define MODF            0x0002          /* Mode Fault Error (Another Device Tried To Become Master)             */
989
#define TXE                     0x0004          /* Transmission Error (Data Sent With No New Data In TDBR)              */
990
#define TXS                     0x0008          /* SPI_TDBR Data Buffer Status (Full/Empty*)                                    */
991
#define RBSY            0x0010          /* Receive Error (Data Received With RDBR Full)                                 */
992
#define RXS                     0x0020          /* SPI_RDBR Data Buffer Status (Full/Empty*)                                    */
993
#define TXCOL           0x0040          /* Transmit Collision Error (Corrupt Data May Have Been Sent)   */
994
 
995
 
996
/*  ****************  GENERAL PURPOSE TIMER MASKS  **********************/
997
/* TIMER_ENABLE Masks                                                                                                   */
998
#define TIMEN0                  0x0001          /* Enable Timer 0                                       */
999
#define TIMEN1                  0x0002          /* Enable Timer 1                                       */
1000
#define TIMEN2                  0x0004          /* Enable Timer 2                                       */
1001
#define TIMEN3                  0x0008          /* Enable Timer 3                                       */
1002
#define TIMEN4                  0x0010          /* Enable Timer 4                                       */
1003
#define TIMEN5                  0x0020          /* Enable Timer 5                                       */
1004
#define TIMEN6                  0x0040          /* Enable Timer 6                                       */
1005
#define TIMEN7                  0x0080          /* Enable Timer 7                                       */
1006
 
1007
/* TIMER_DISABLE Masks                                                                                                  */
1008
#define TIMDIS0                 TIMEN0          /* Disable Timer 0                                      */
1009
#define TIMDIS1                 TIMEN1          /* Disable Timer 1                                      */
1010
#define TIMDIS2                 TIMEN2          /* Disable Timer 2                                      */
1011
#define TIMDIS3                 TIMEN3          /* Disable Timer 3                                      */
1012
#define TIMDIS4                 TIMEN4          /* Disable Timer 4                                      */
1013
#define TIMDIS5                 TIMEN5          /* Disable Timer 5                                      */
1014
#define TIMDIS6                 TIMEN6          /* Disable Timer 6                                      */
1015
#define TIMDIS7                 TIMEN7          /* Disable Timer 7                                      */
1016
 
1017
/* TIMER_STATUS Masks                                                                                                   */
1018
#define TIMIL0                  0x00000001      /* Timer 0 Interrupt                            */
1019
#define TIMIL1                  0x00000002      /* Timer 1 Interrupt                            */
1020
#define TIMIL2                  0x00000004      /* Timer 2 Interrupt                            */
1021
#define TIMIL3                  0x00000008      /* Timer 3 Interrupt                            */
1022
#define TOVF_ERR0               0x00000010      /* Timer 0 Counter Overflow                     */
1023
#define TOVF_ERR1               0x00000020      /* Timer 1 Counter Overflow                     */
1024
#define TOVF_ERR2               0x00000040      /* Timer 2 Counter Overflow                     */
1025
#define TOVF_ERR3               0x00000080      /* Timer 3 Counter Overflow                     */
1026
#define TRUN0                   0x00001000      /* Timer 0 Slave Enable Status          */
1027
#define TRUN1                   0x00002000      /* Timer 1 Slave Enable Status          */
1028
#define TRUN2                   0x00004000      /* Timer 2 Slave Enable Status          */
1029
#define TRUN3                   0x00008000      /* Timer 3 Slave Enable Status          */
1030
#define TIMIL4                  0x00010000      /* Timer 4 Interrupt                            */
1031
#define TIMIL5                  0x00020000      /* Timer 5 Interrupt                            */
1032
#define TIMIL6                  0x00040000      /* Timer 6 Interrupt                            */
1033
#define TIMIL7                  0x00080000      /* Timer 7 Interrupt                            */
1034
#define TOVF_ERR4               0x00100000      /* Timer 4 Counter Overflow                     */
1035
#define TOVF_ERR5               0x00200000      /* Timer 5 Counter Overflow                     */
1036
#define TOVF_ERR6               0x00400000      /* Timer 6 Counter Overflow                     */
1037
#define TOVF_ERR7               0x00800000      /* Timer 7 Counter Overflow                     */
1038
#define TRUN4                   0x10000000      /* Timer 4 Slave Enable Status          */
1039
#define TRUN5                   0x20000000      /* Timer 5 Slave Enable Status          */
1040
#define TRUN6                   0x40000000      /* Timer 6 Slave Enable Status          */
1041
#define TRUN7                   0x80000000      /* Timer 7 Slave Enable Status          */
1042
 
1043
/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
1044
#define TOVL_ERR0 TOVF_ERR0
1045
#define TOVL_ERR1 TOVF_ERR1
1046
#define TOVL_ERR2 TOVF_ERR2
1047
#define TOVL_ERR3 TOVF_ERR3
1048
#define TOVL_ERR4 TOVF_ERR4
1049
#define TOVL_ERR5 TOVF_ERR5
1050
#define TOVL_ERR6 TOVF_ERR6
1051
#define TOVL_ERR7 TOVF_ERR7
1052
 
1053
/* TIMERx_CONFIG Masks                                                                                                  */
1054
#define PWM_OUT                 0x0001  /* Pulse-Width Modulation Output Mode   */
1055
#define WDTH_CAP                0x0002  /* Width Capture Input Mode                             */
1056
#define EXT_CLK                 0x0003  /* External Clock Mode                                  */
1057
#define PULSE_HI                0x0004  /* Action Pulse (Positive/Negative*)    */
1058
#define PERIOD_CNT              0x0008  /* Period Count                                                 */
1059
#define IRQ_ENA                 0x0010  /* Interrupt Request Enable                             */
1060
#define TIN_SEL                 0x0020  /* Timer Input Select                                   */
1061
#define OUT_DIS                 0x0040  /* Output Pad Disable                                   */
1062
#define CLK_SEL                 0x0080  /* Timer Clock Select                                   */
1063
#define TOGGLE_HI               0x0100  /* PWM_OUT PULSE_HI Toggle Mode                 */
1064
#define EMU_RUN                 0x0200  /* Emulation Behavior Select                    */
1065
#define ERR_TYP                 0xC000  /* Error Type                                                   */
1066
 
1067
 
1068
/* ******************   GPIO PORTS F, G, H MASKS  ***********************/
1069
/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  Masks                                 */
1070
/* Port F Masks                                                                                                                 */
1071
#define PF0             0x0001
1072
#define PF1             0x0002
1073
#define PF2             0x0004
1074
#define PF3             0x0008
1075
#define PF4             0x0010
1076
#define PF5             0x0020
1077
#define PF6             0x0040
1078
#define PF7             0x0080
1079
#define PF8             0x0100
1080
#define PF9             0x0200
1081
#define PF10    0x0400
1082
#define PF11    0x0800
1083
#define PF12    0x1000
1084
#define PF13    0x2000
1085
#define PF14    0x4000
1086
#define PF15    0x8000
1087
 
1088
/* Port G Masks                                                                                                                 */
1089
#define PG0             0x0001
1090
#define PG1             0x0002
1091
#define PG2             0x0004
1092
#define PG3             0x0008
1093
#define PG4             0x0010
1094
#define PG5             0x0020
1095
#define PG6             0x0040
1096
#define PG7             0x0080
1097
#define PG8             0x0100
1098
#define PG9             0x0200
1099
#define PG10    0x0400
1100
#define PG11    0x0800
1101
#define PG12    0x1000
1102
#define PG13    0x2000
1103
#define PG14    0x4000
1104
#define PG15    0x8000
1105
 
1106
/* Port H Masks                                                                                                                 */
1107
#define PH0             0x0001
1108
#define PH1             0x0002
1109
#define PH2             0x0004
1110
#define PH3             0x0008
1111
#define PH4             0x0010
1112
#define PH5             0x0020
1113
#define PH6             0x0040
1114
#define PH7             0x0080
1115
#define PH8             0x0100
1116
#define PH9             0x0200
1117
#define PH10    0x0400
1118
#define PH11    0x0800
1119
#define PH12    0x1000
1120
#define PH13    0x2000
1121
#define PH14    0x4000
1122
#define PH15    0x8000
1123
 
1124
 
1125
/* *******************  SERIAL PORT MASKS  **************************************/
1126
/* SPORTx_TCR1 Masks                                                                                                                    */
1127
#define TSPEN           0x0001          /* Transmit Enable                                                              */
1128
#define ITCLK           0x0002          /* Internal Transmit Clock Select                               */
1129
#define DTYPE_NORM      0x0004          /* Data Format Normal                                                   */
1130
#define DTYPE_ULAW      0x0008          /* Compand Using u-Law                                                  */
1131
#define DTYPE_ALAW      0x000C          /* Compand Using A-Law                                                  */
1132
#define TLSBIT          0x0010          /* Transmit Bit Order                                                   */
1133
#define ITFS            0x0200          /* Internal Transmit Frame Sync Select                  */
1134
#define TFSR            0x0400          /* Transmit Frame Sync Required Select                  */
1135
#define DITFS           0x0800          /* Data-Independent Transmit Frame Sync Select  */
1136
#define LTFS            0x1000          /* Low Transmit Frame Sync Select                               */
1137
#define LATFS           0x2000          /* Late Transmit Frame Sync Select                              */
1138
#define TCKFE           0x4000          /* Clock Falling Edge Select                                    */
1139
 
1140
/* SPORTx_TCR2 Masks and Macro                                                                                                  */
1141
#define SLEN(x)         ((x)&0x1F)      /* SPORT TX Word Length (2 - 31)                                */
1142
#define TXSE            0x0100          /* TX Secondary Enable                                                  */
1143
#define TSFSE           0x0200          /* Transmit Stereo Frame Sync Enable                    */
1144
#define TRFST           0x0400          /* Left/Right Order (1 = Right Channel 1st)             */
1145
 
1146
/* SPORTx_RCR1 Masks                                                                                                                    */
1147
#define RSPEN           0x0001          /* Receive Enable                                                               */
1148
#define IRCLK           0x0002          /* Internal Receive Clock Select                                */
1149
#define DTYPE_NORM      0x0004          /* Data Format Normal                                                   */
1150
#define DTYPE_ULAW      0x0008          /* Compand Using u-Law                                                  */
1151
#define DTYPE_ALAW      0x000C          /* Compand Using A-Law                                                  */
1152
#define RLSBIT          0x0010          /* Receive Bit Order                                                    */
1153
#define IRFS            0x0200          /* Internal Receive Frame Sync Select                   */
1154
#define RFSR            0x0400          /* Receive Frame Sync Required Select                   */
1155
#define LRFS            0x1000          /* Low Receive Frame Sync Select                                */
1156
#define LARFS           0x2000          /* Late Receive Frame Sync Select                               */
1157
#define RCKFE           0x4000          /* Clock Falling Edge Select                                    */
1158
 
1159
/* SPORTx_RCR2 Masks                                                                                                                    */
1160
#define SLEN(x)         ((x)&0x1F)      /* SPORT RX Word Length (2 - 31)                                */
1161
#define RXSE            0x0100          /* RX Secondary Enable                                                  */
1162
#define RSFSE           0x0200          /* RX Stereo Frame Sync Enable                                  */
1163
#define RRFST           0x0400          /* Right-First Data Order                                               */
1164
 
1165
/* SPORTx_STAT Masks                                                                                                                    */
1166
#define RXNE            0x0001          /* Receive FIFO Not Empty Status                                */
1167
#define RUVF            0x0002          /* Sticky Receive Underflow Status                              */
1168
#define ROVF            0x0004          /* Sticky Receive Overflow Status                               */
1169
#define TXF                     0x0008          /* Transmit FIFO Full Status                                    */
1170
#define TUVF            0x0010          /* Sticky Transmit Underflow Status                             */
1171
#define TOVF            0x0020          /* Sticky Transmit Overflow Status                              */
1172
#define TXHRE           0x0040          /* Transmit Hold Register Empty                                 */
1173
 
1174
/* SPORTx_MCMC1 Macros                                                                                                                  */
1175
#define WOFF(x)         ((x) & 0x3FF)   /* Multichannel Window Offset Field                     */
1176
 
1177
/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits                                            */
1178
#define WSIZE(x)        (((((x)>>0x3)-1)&0xF) << 0xC)   /* Multichannel Window Size = (x/8)-1   */
1179
 
1180
/* SPORTx_MCMC2 Masks                                                                                                                   */
1181
#define REC_BYPASS      0x0000          /* Bypass Mode (No Clock Recovery)                              */
1182
#define REC_2FROM4      0x0002          /* Recover 2 MHz Clock from 4 MHz Clock                 */
1183
#define REC_8FROM16     0x0003          /* Recover 8 MHz Clock from 16 MHz Clock                */
1184
#define MCDTXPE         0x0004          /* Multichannel DMA Transmit Packing                    */
1185
#define MCDRXPE         0x0008          /* Multichannel DMA Receive Packing                             */
1186
#define MCMEN           0x0010          /* Multichannel Frame Mode Enable                               */
1187
#define FSDR            0x0080          /* Multichannel Frame Sync to Data Relationship */
1188
#define MFD_0           0x0000          /* Multichannel Frame Delay = 0                                 */
1189
#define MFD_1           0x1000          /* Multichannel Frame Delay = 1                                 */
1190
#define MFD_2           0x2000          /* Multichannel Frame Delay = 2                                 */
1191
#define MFD_3           0x3000          /* Multichannel Frame Delay = 3                                 */
1192
#define MFD_4           0x4000          /* Multichannel Frame Delay = 4                                 */
1193
#define MFD_5           0x5000          /* Multichannel Frame Delay = 5                                 */
1194
#define MFD_6           0x6000          /* Multichannel Frame Delay = 6                                 */
1195
#define MFD_7           0x7000          /* Multichannel Frame Delay = 7                                 */
1196
#define MFD_8           0x8000          /* Multichannel Frame Delay = 8                                 */
1197
#define MFD_9           0x9000          /* Multichannel Frame Delay = 9                                 */
1198
#define MFD_10          0xA000          /* Multichannel Frame Delay = 10                                */
1199
#define MFD_11          0xB000          /* Multichannel Frame Delay = 11                                */
1200
#define MFD_12          0xC000          /* Multichannel Frame Delay = 12                                */
1201
#define MFD_13          0xD000          /* Multichannel Frame Delay = 13                                */
1202
#define MFD_14          0xE000          /* Multichannel Frame Delay = 14                                */
1203
#define MFD_15          0xF000          /* Multichannel Frame Delay = 15                                */
1204
 
1205
 
1206
/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  *************************/
1207
/* EBIU_AMGCTL Masks                                                                                                                                    */
1208
#define AMCKEN                  0x0001          /* Enable CLKOUT                                                                        */
1209
#define AMBEN_NONE              0x0000          /* All Banks Disabled                                                           */
1210
#define AMBEN_B0                0x0002          /* Enable Async Memory Bank 0 only                                      */
1211
#define AMBEN_B0_B1             0x0004          /* Enable Async Memory Banks 0 & 1 only                         */
1212
#define AMBEN_B0_B1_B2  0x0006          /* Enable Async Memory Banks 0, 1, and 2                        */
1213
#define AMBEN_ALL               0x0008          /* Enable Async Memory Banks (all) 0, 1, 2, and 3       */
1214
#define CDPRIO                  0x0100        /* DMA has priority over core for for external accesses */
1215
 
1216
/* EBIU_AMBCTL0 Masks                                                                                                                                   */
1217
#define B0RDYEN                 0x00000001  /* Bank 0 (B0) RDY Enable                                                   */
1218
#define B0RDYPOL                0x00000002  /* B0 RDY Active High                                                               */
1219
#define B0TT_1                  0x00000004  /* B0 Transition Time (Read to Write) = 1 cycle             */
1220
#define B0TT_2                  0x00000008  /* B0 Transition Time (Read to Write) = 2 cycles    */
1221
#define B0TT_3                  0x0000000C  /* B0 Transition Time (Read to Write) = 3 cycles    */
1222
#define B0TT_4                  0x00000000  /* B0 Transition Time (Read to Write) = 4 cycles    */
1223
#define B0ST_1                  0x00000010  /* B0 Setup Time (AOE to Read/Write) = 1 cycle              */
1224
#define B0ST_2                  0x00000020  /* B0 Setup Time (AOE to Read/Write) = 2 cycles             */
1225
#define B0ST_3                  0x00000030  /* B0 Setup Time (AOE to Read/Write) = 3 cycles             */
1226
#define B0ST_4                  0x00000000  /* B0 Setup Time (AOE to Read/Write) = 4 cycles             */
1227
#define B0HT_1                  0x00000040  /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle             */
1228
#define B0HT_2                  0x00000080  /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles    */
1229
#define B0HT_3                  0x000000C0  /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles    */
1230
#define B0HT_0                  0x00000000  /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles    */
1231
#define B0RAT_1                 0x00000100  /* B0 Read Access Time = 1 cycle                                    */
1232
#define B0RAT_2                 0x00000200  /* B0 Read Access Time = 2 cycles                                   */
1233
#define B0RAT_3                 0x00000300  /* B0 Read Access Time = 3 cycles                                   */
1234
#define B0RAT_4                 0x00000400  /* B0 Read Access Time = 4 cycles                                   */
1235
#define B0RAT_5                 0x00000500  /* B0 Read Access Time = 5 cycles                                   */
1236
#define B0RAT_6                 0x00000600  /* B0 Read Access Time = 6 cycles                                   */
1237
#define B0RAT_7                 0x00000700  /* B0 Read Access Time = 7 cycles                                   */
1238
#define B0RAT_8                 0x00000800  /* B0 Read Access Time = 8 cycles                                   */
1239
#define B0RAT_9                 0x00000900  /* B0 Read Access Time = 9 cycles                                   */
1240
#define B0RAT_10                0x00000A00  /* B0 Read Access Time = 10 cycles                                  */
1241
#define B0RAT_11                0x00000B00  /* B0 Read Access Time = 11 cycles                                  */
1242
#define B0RAT_12                0x00000C00  /* B0 Read Access Time = 12 cycles                                  */
1243
#define B0RAT_13                0x00000D00  /* B0 Read Access Time = 13 cycles                                  */
1244
#define B0RAT_14                0x00000E00  /* B0 Read Access Time = 14 cycles                                  */
1245
#define B0RAT_15                0x00000F00  /* B0 Read Access Time = 15 cycles                                  */
1246
#define B0WAT_1                 0x00001000  /* B0 Write Access Time = 1 cycle                                   */
1247
#define B0WAT_2                 0x00002000  /* B0 Write Access Time = 2 cycles                                  */
1248
#define B0WAT_3                 0x00003000  /* B0 Write Access Time = 3 cycles                                  */
1249
#define B0WAT_4                 0x00004000  /* B0 Write Access Time = 4 cycles                                  */
1250
#define B0WAT_5                 0x00005000  /* B0 Write Access Time = 5 cycles                                  */
1251
#define B0WAT_6                 0x00006000  /* B0 Write Access Time = 6 cycles                                  */
1252
#define B0WAT_7                 0x00007000  /* B0 Write Access Time = 7 cycles                                  */
1253
#define B0WAT_8                 0x00008000  /* B0 Write Access Time = 8 cycles                                  */
1254
#define B0WAT_9                 0x00009000  /* B0 Write Access Time = 9 cycles                                  */
1255
#define B0WAT_10                0x0000A000  /* B0 Write Access Time = 10 cycles                                 */
1256
#define B0WAT_11                0x0000B000  /* B0 Write Access Time = 11 cycles                                 */
1257
#define B0WAT_12                0x0000C000  /* B0 Write Access Time = 12 cycles                                 */
1258
#define B0WAT_13                0x0000D000  /* B0 Write Access Time = 13 cycles                                 */
1259
#define B0WAT_14                0x0000E000  /* B0 Write Access Time = 14 cycles                                 */
1260
#define B0WAT_15                0x0000F000  /* B0 Write Access Time = 15 cycles                                 */
1261
 
1262
#define B1RDYEN                 0x00010000  /* Bank 1 (B1) RDY Enable                           */
1263
#define B1RDYPOL                0x00020000  /* B1 RDY Active High                               */
1264
#define B1TT_1                  0x00040000  /* B1 Transition Time (Read to Write) = 1 cycle     */
1265
#define B1TT_2                  0x00080000  /* B1 Transition Time (Read to Write) = 2 cycles    */
1266
#define B1TT_3                  0x000C0000  /* B1 Transition Time (Read to Write) = 3 cycles    */
1267
#define B1TT_4                  0x00000000  /* B1 Transition Time (Read to Write) = 4 cycles    */
1268
#define B1ST_1                  0x00100000  /* B1 Setup Time (AOE to Read/Write) = 1 cycle      */
1269
#define B1ST_2                  0x00200000  /* B1 Setup Time (AOE to Read/Write) = 2 cycles     */
1270
#define B1ST_3                  0x00300000  /* B1 Setup Time (AOE to Read/Write) = 3 cycles     */
1271
#define B1ST_4                  0x00000000  /* B1 Setup Time (AOE to Read/Write) = 4 cycles     */
1272
#define B1HT_1                  0x00400000  /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle     */
1273
#define B1HT_2                  0x00800000  /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles    */
1274
#define B1HT_3                  0x00C00000  /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles    */
1275
#define B1HT_0                  0x00000000  /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles    */
1276
#define B1RAT_1                 0x01000000  /* B1 Read Access Time = 1 cycle                                    */
1277
#define B1RAT_2                 0x02000000  /* B1 Read Access Time = 2 cycles                                   */
1278
#define B1RAT_3                 0x03000000  /* B1 Read Access Time = 3 cycles                                   */
1279
#define B1RAT_4                 0x04000000  /* B1 Read Access Time = 4 cycles                                   */
1280
#define B1RAT_5                 0x05000000  /* B1 Read Access Time = 5 cycles                                   */
1281
#define B1RAT_6                 0x06000000  /* B1 Read Access Time = 6 cycles                                   */
1282
#define B1RAT_7                 0x07000000  /* B1 Read Access Time = 7 cycles                                   */
1283
#define B1RAT_8                 0x08000000  /* B1 Read Access Time = 8 cycles                                   */
1284
#define B1RAT_9                 0x09000000  /* B1 Read Access Time = 9 cycles                                   */
1285
#define B1RAT_10                0x0A000000  /* B1 Read Access Time = 10 cycles                                  */
1286
#define B1RAT_11                0x0B000000  /* B1 Read Access Time = 11 cycles                                  */
1287
#define B1RAT_12                0x0C000000  /* B1 Read Access Time = 12 cycles                                  */
1288
#define B1RAT_13                0x0D000000  /* B1 Read Access Time = 13 cycles                                  */
1289
#define B1RAT_14                0x0E000000  /* B1 Read Access Time = 14 cycles                                  */
1290
#define B1RAT_15                0x0F000000  /* B1 Read Access Time = 15 cycles                                  */
1291
#define B1WAT_1                 0x10000000  /* B1 Write Access Time = 1 cycle                                   */
1292
#define B1WAT_2                 0x20000000  /* B1 Write Access Time = 2 cycles                                  */
1293
#define B1WAT_3                 0x30000000  /* B1 Write Access Time = 3 cycles                                  */
1294
#define B1WAT_4                 0x40000000  /* B1 Write Access Time = 4 cycles                                  */
1295
#define B1WAT_5                 0x50000000  /* B1 Write Access Time = 5 cycles                                  */
1296
#define B1WAT_6                 0x60000000  /* B1 Write Access Time = 6 cycles                                  */
1297
#define B1WAT_7                 0x70000000  /* B1 Write Access Time = 7 cycles                                  */
1298
#define B1WAT_8                 0x80000000  /* B1 Write Access Time = 8 cycles                                  */
1299
#define B1WAT_9                 0x90000000  /* B1 Write Access Time = 9 cycles                                  */
1300
#define B1WAT_10                0xA0000000  /* B1 Write Access Time = 10 cycles                                 */
1301
#define B1WAT_11                0xB0000000  /* B1 Write Access Time = 11 cycles                                 */
1302
#define B1WAT_12                0xC0000000  /* B1 Write Access Time = 12 cycles                                 */
1303
#define B1WAT_13                0xD0000000  /* B1 Write Access Time = 13 cycles                                 */
1304
#define B1WAT_14                0xE0000000  /* B1 Write Access Time = 14 cycles                                 */
1305
#define B1WAT_15                0xF0000000  /* B1 Write Access Time = 15 cycles                                 */
1306
 
1307
/* EBIU_AMBCTL1 Masks                                                                                                                                   */
1308
#define B2RDYEN                 0x00000001  /* Bank 2 (B2) RDY Enable                                                   */
1309
#define B2RDYPOL                0x00000002  /* B2 RDY Active High                                                               */
1310
#define B2TT_1                  0x00000004  /* B2 Transition Time (Read to Write) = 1 cycle             */
1311
#define B2TT_2                  0x00000008  /* B2 Transition Time (Read to Write) = 2 cycles    */
1312
#define B2TT_3                  0x0000000C  /* B2 Transition Time (Read to Write) = 3 cycles    */
1313
#define B2TT_4                  0x00000000  /* B2 Transition Time (Read to Write) = 4 cycles    */
1314
#define B2ST_1                  0x00000010  /* B2 Setup Time (AOE to Read/Write) = 1 cycle              */
1315
#define B2ST_2                  0x00000020  /* B2 Setup Time (AOE to Read/Write) = 2 cycles             */
1316
#define B2ST_3                  0x00000030  /* B2 Setup Time (AOE to Read/Write) = 3 cycles             */
1317
#define B2ST_4                  0x00000000  /* B2 Setup Time (AOE to Read/Write) = 4 cycles             */
1318
#define B2HT_1                  0x00000040  /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle             */
1319
#define B2HT_2                  0x00000080  /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles    */
1320
#define B2HT_3                  0x000000C0  /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles    */
1321
#define B2HT_0                  0x00000000  /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles    */
1322
#define B2RAT_1                 0x00000100  /* B2 Read Access Time = 1 cycle                                    */
1323
#define B2RAT_2                 0x00000200  /* B2 Read Access Time = 2 cycles                                   */
1324
#define B2RAT_3                 0x00000300  /* B2 Read Access Time = 3 cycles                                   */
1325
#define B2RAT_4                 0x00000400  /* B2 Read Access Time = 4 cycles                                   */
1326
#define B2RAT_5                 0x00000500  /* B2 Read Access Time = 5 cycles                                   */
1327
#define B2RAT_6                 0x00000600  /* B2 Read Access Time = 6 cycles                                   */
1328
#define B2RAT_7                 0x00000700  /* B2 Read Access Time = 7 cycles                                   */
1329
#define B2RAT_8                 0x00000800  /* B2 Read Access Time = 8 cycles                                   */
1330
#define B2RAT_9                 0x00000900  /* B2 Read Access Time = 9 cycles                                   */
1331
#define B2RAT_10                0x00000A00  /* B2 Read Access Time = 10 cycles                                  */
1332
#define B2RAT_11                0x00000B00  /* B2 Read Access Time = 11 cycles                                  */
1333
#define B2RAT_12                0x00000C00  /* B2 Read Access Time = 12 cycles                                  */
1334
#define B2RAT_13                0x00000D00  /* B2 Read Access Time = 13 cycles                                  */
1335
#define B2RAT_14                0x00000E00  /* B2 Read Access Time = 14 cycles                                  */
1336
#define B2RAT_15                0x00000F00  /* B2 Read Access Time = 15 cycles                                  */
1337
#define B2WAT_1                 0x00001000  /* B2 Write Access Time = 1 cycle                                   */
1338
#define B2WAT_2                 0x00002000  /* B2 Write Access Time = 2 cycles                                  */
1339
#define B2WAT_3                 0x00003000  /* B2 Write Access Time = 3 cycles                                  */
1340
#define B2WAT_4                 0x00004000  /* B2 Write Access Time = 4 cycles                                  */
1341
#define B2WAT_5                 0x00005000  /* B2 Write Access Time = 5 cycles                                  */
1342
#define B2WAT_6                 0x00006000  /* B2 Write Access Time = 6 cycles                                  */
1343
#define B2WAT_7                 0x00007000  /* B2 Write Access Time = 7 cycles                                  */
1344
#define B2WAT_8                 0x00008000  /* B2 Write Access Time = 8 cycles                                  */
1345
#define B2WAT_9                 0x00009000  /* B2 Write Access Time = 9 cycles                                  */
1346
#define B2WAT_10                0x0000A000  /* B2 Write Access Time = 10 cycles                                 */
1347
#define B2WAT_11                0x0000B000  /* B2 Write Access Time = 11 cycles                                 */
1348
#define B2WAT_12                0x0000C000  /* B2 Write Access Time = 12 cycles                                 */
1349
#define B2WAT_13                0x0000D000  /* B2 Write Access Time = 13 cycles                                 */
1350
#define B2WAT_14                0x0000E000  /* B2 Write Access Time = 14 cycles                                 */
1351
#define B2WAT_15                0x0000F000  /* B2 Write Access Time = 15 cycles                                 */
1352
 
1353
#define B3RDYEN                 0x00010000  /* Bank 3 (B3) RDY Enable                                                   */
1354
#define B3RDYPOL                0x00020000  /* B3 RDY Active High                                                               */
1355
#define B3TT_1                  0x00040000  /* B3 Transition Time (Read to Write) = 1 cycle             */
1356
#define B3TT_2                  0x00080000  /* B3 Transition Time (Read to Write) = 2 cycles    */
1357
#define B3TT_3                  0x000C0000  /* B3 Transition Time (Read to Write) = 3 cycles    */
1358
#define B3TT_4                  0x00000000  /* B3 Transition Time (Read to Write) = 4 cycles    */
1359
#define B3ST_1                  0x00100000  /* B3 Setup Time (AOE to Read/Write) = 1 cycle              */
1360
#define B3ST_2                  0x00200000  /* B3 Setup Time (AOE to Read/Write) = 2 cycles             */
1361
#define B3ST_3                  0x00300000  /* B3 Setup Time (AOE to Read/Write) = 3 cycles             */
1362
#define B3ST_4                  0x00000000  /* B3 Setup Time (AOE to Read/Write) = 4 cycles             */
1363
#define B3HT_1                  0x00400000  /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle             */
1364
#define B3HT_2                  0x00800000  /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles    */
1365
#define B3HT_3                  0x00C00000  /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles    */
1366
#define B3HT_0                  0x00000000  /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles    */
1367
#define B3RAT_1                 0x01000000  /* B3 Read Access Time = 1 cycle                                    */
1368
#define B3RAT_2                 0x02000000  /* B3 Read Access Time = 2 cycles                                   */
1369
#define B3RAT_3                 0x03000000  /* B3 Read Access Time = 3 cycles                                   */
1370
#define B3RAT_4                 0x04000000  /* B3 Read Access Time = 4 cycles                                   */
1371
#define B3RAT_5                 0x05000000  /* B3 Read Access Time = 5 cycles                                   */
1372
#define B3RAT_6                 0x06000000  /* B3 Read Access Time = 6 cycles                                   */
1373
#define B3RAT_7                 0x07000000  /* B3 Read Access Time = 7 cycles                                   */
1374
#define B3RAT_8                 0x08000000  /* B3 Read Access Time = 8 cycles                                   */
1375
#define B3RAT_9                 0x09000000  /* B3 Read Access Time = 9 cycles                                   */
1376
#define B3RAT_10                0x0A000000  /* B3 Read Access Time = 10 cycles                                  */
1377
#define B3RAT_11                0x0B000000  /* B3 Read Access Time = 11 cycles                                  */
1378
#define B3RAT_12                0x0C000000  /* B3 Read Access Time = 12 cycles                                  */
1379
#define B3RAT_13                0x0D000000  /* B3 Read Access Time = 13 cycles                                  */
1380
#define B3RAT_14                0x0E000000  /* B3 Read Access Time = 14 cycles                                  */
1381
#define B3RAT_15                0x0F000000  /* B3 Read Access Time = 15 cycles                                  */
1382
#define B3WAT_1                 0x10000000  /* B3 Write Access Time = 1 cycle                                   */
1383
#define B3WAT_2                 0x20000000  /* B3 Write Access Time = 2 cycles                                  */
1384
#define B3WAT_3                 0x30000000  /* B3 Write Access Time = 3 cycles                                  */
1385
#define B3WAT_4                 0x40000000  /* B3 Write Access Time = 4 cycles                                  */
1386
#define B3WAT_5                 0x50000000  /* B3 Write Access Time = 5 cycles                                  */
1387
#define B3WAT_6                 0x60000000  /* B3 Write Access Time = 6 cycles                                  */
1388
#define B3WAT_7                 0x70000000  /* B3 Write Access Time = 7 cycles                                  */
1389
#define B3WAT_8                 0x80000000  /* B3 Write Access Time = 8 cycles                                  */
1390
#define B3WAT_9                 0x90000000  /* B3 Write Access Time = 9 cycles                                  */
1391
#define B3WAT_10                0xA0000000  /* B3 Write Access Time = 10 cycles                                 */
1392
#define B3WAT_11                0xB0000000  /* B3 Write Access Time = 11 cycles                                 */
1393
#define B3WAT_12                0xC0000000  /* B3 Write Access Time = 12 cycles                                 */
1394
#define B3WAT_13                0xD0000000  /* B3 Write Access Time = 13 cycles                                 */
1395
#define B3WAT_14                0xE0000000  /* B3 Write Access Time = 14 cycles                                 */
1396
#define B3WAT_15                0xF0000000  /* B3 Write Access Time = 15 cycles                                 */
1397
 
1398
 
1399
/* **********************  SDRAM CONTROLLER MASKS  **********************************************/
1400
/* EBIU_SDGCTL Masks                                                                                                                                                    */
1401
#define SCTLE                   0x00000001      /* Enable SDRAM Signals                                                                         */
1402
#define CL_2                    0x00000008      /* SDRAM CAS Latency = 2 cycles                                                         */
1403
#define CL_3                    0x0000000C      /* SDRAM CAS Latency = 3 cycles                                                         */
1404
#define PASR_ALL                0x00000000      /* All 4 SDRAM Banks Refreshed In Self-Refresh                          */
1405
#define PASR_B0_B1              0x00000010      /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh            */
1406
#define PASR_B0                 0x00000020      /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh                       */
1407
#define TRAS_1                  0x00000040      /* SDRAM tRAS = 1 cycle                                                                         */
1408
#define TRAS_2                  0x00000080      /* SDRAM tRAS = 2 cycles                                                                        */
1409
#define TRAS_3                  0x000000C0      /* SDRAM tRAS = 3 cycles                                                                        */
1410
#define TRAS_4                  0x00000100      /* SDRAM tRAS = 4 cycles                                                                        */
1411
#define TRAS_5                  0x00000140      /* SDRAM tRAS = 5 cycles                                                                        */
1412
#define TRAS_6                  0x00000180      /* SDRAM tRAS = 6 cycles                                                                        */
1413
#define TRAS_7                  0x000001C0      /* SDRAM tRAS = 7 cycles                                                                        */
1414
#define TRAS_8                  0x00000200      /* SDRAM tRAS = 8 cycles                                                                        */
1415
#define TRAS_9                  0x00000240      /* SDRAM tRAS = 9 cycles                                                                        */
1416
#define TRAS_10                 0x00000280      /* SDRAM tRAS = 10 cycles                                                                       */
1417
#define TRAS_11                 0x000002C0      /* SDRAM tRAS = 11 cycles                                                                       */
1418
#define TRAS_12                 0x00000300      /* SDRAM tRAS = 12 cycles                                                                       */
1419
#define TRAS_13                 0x00000340      /* SDRAM tRAS = 13 cycles                                                                       */
1420
#define TRAS_14                 0x00000380      /* SDRAM tRAS = 14 cycles                                                                       */
1421
#define TRAS_15                 0x000003C0      /* SDRAM tRAS = 15 cycles                                                                       */
1422
#define TRP_1                   0x00000800      /* SDRAM tRP = 1 cycle                                                                          */
1423
#define TRP_2                   0x00001000      /* SDRAM tRP = 2 cycles                                                                         */
1424
#define TRP_3                   0x00001800      /* SDRAM tRP = 3 cycles                                                                         */
1425
#define TRP_4                   0x00002000      /* SDRAM tRP = 4 cycles                                                                         */
1426
#define TRP_5                   0x00002800      /* SDRAM tRP = 5 cycles                                                                         */
1427
#define TRP_6                   0x00003000      /* SDRAM tRP = 6 cycles                                                                         */
1428
#define TRP_7                   0x00003800      /* SDRAM tRP = 7 cycles                                                                         */
1429
#define TRCD_1                  0x00008000      /* SDRAM tRCD = 1 cycle                                                                         */
1430
#define TRCD_2                  0x00010000      /* SDRAM tRCD = 2 cycles                                                                        */
1431
#define TRCD_3                  0x00018000      /* SDRAM tRCD = 3 cycles                                                                        */
1432
#define TRCD_4                  0x00020000      /* SDRAM tRCD = 4 cycles                                                                        */
1433
#define TRCD_5                  0x00028000      /* SDRAM tRCD = 5 cycles                                                                        */
1434
#define TRCD_6                  0x00030000      /* SDRAM tRCD = 6 cycles                                                                        */
1435
#define TRCD_7                  0x00038000      /* SDRAM tRCD = 7 cycles                                                                        */
1436
#define TWR_1                   0x00080000      /* SDRAM tWR = 1 cycle                                                                          */
1437
#define TWR_2                   0x00100000      /* SDRAM tWR = 2 cycles                                                                         */
1438
#define TWR_3                   0x00180000      /* SDRAM tWR = 3 cycles                                                                         */
1439
#define PUPSD                   0x00200000      /* Power-Up Start Delay (15 SCLK Cycles Delay)                          */
1440
#define PSM                             0x00400000      /* Power-Up Sequence (Mode Register Before/After* Refresh)      */
1441
#define PSS                             0x00800000      /* Enable Power-Up Sequence on Next SDRAM Access                        */
1442
#define SRFS                    0x01000000      /* Enable SDRAM Self-Refresh Mode                                                       */
1443
#define EBUFE                   0x02000000      /* Enable External Buffering Timing                                                     */
1444
#define FBBRW                   0x04000000      /* Enable Fast Back-To-Back Read To Write                                       */
1445
#define EMREN                   0x10000000      /* Extended Mode Register Enable                                                        */
1446
#define TCSR                    0x20000000      /* Temp-Compensated Self-Refresh Value (85/45* Deg C)           */
1447
#define CDDBG                   0x40000000      /* Tristate SDRAM Controls During Bus Grant                                     */
1448
 
1449
/* EBIU_SDBCTL Masks                                                                                                                                            */
1450
#define EBE                             0x0001          /* Enable SDRAM External Bank                                                   */
1451
#define EBSZ_16                 0x0000          /* SDRAM External Bank Size = 16MB      */
1452
#define EBSZ_32                 0x0002          /* SDRAM External Bank Size = 32MB      */
1453
#define EBSZ_64                 0x0004          /* SDRAM External Bank Size = 64MB      */
1454
#define EBSZ_128                0x0006          /* SDRAM External Bank Size = 128MB             */
1455
#define EBSZ_256                0x0008          /* SDRAM External Bank Size = 256MB     */
1456
#define EBSZ_512                0x000A          /* SDRAM External Bank Size = 512MB             */
1457
#define EBCAW_8                 0x0000          /* SDRAM External Bank Column Address Width = 8 Bits    */
1458
#define EBCAW_9                 0x0010          /* SDRAM External Bank Column Address Width = 9 Bits    */
1459
#define EBCAW_10                0x0020          /* SDRAM External Bank Column Address Width = 10 Bits   */
1460
#define EBCAW_11                0x0030          /* SDRAM External Bank Column Address Width = 11 Bits   */
1461
 
1462
/* EBIU_SDSTAT Masks                                                                                                            */
1463
#define SDCI                    0x0001          /* SDRAM Controller Idle                                */
1464
#define SDSRA                   0x0002          /* SDRAM Self-Refresh Active                    */
1465
#define SDPUA                   0x0004          /* SDRAM Power-Up Active                                */
1466
#define SDRS                    0x0008          /* SDRAM Will Power-Up On Next Access   */
1467
#define SDEASE                  0x0010          /* SDRAM EAB Sticky Error Status                */
1468
#define BGSTAT                  0x0020          /* Bus Grant Status                                             */
1469
 
1470
 
1471
/* **************************  DMA CONTROLLER MASKS  ********************************/
1472
/* DMAx_CONFIG, MDMA_yy_CONFIG Masks                                                                                            */
1473
#define DMAEN                   0x0001          /* DMA Channel Enable                                                   */
1474
#define WNR                             0x0002          /* Channel Direction (W/R*)                                             */
1475
#define WDSIZE_8                0x0000          /* Transfer Word Size = 8                                               */
1476
#define WDSIZE_16               0x0004          /* Transfer Word Size = 16                                              */
1477
#define WDSIZE_32               0x0008          /* Transfer Word Size = 32                                              */
1478
#define DMA2D                   0x0010          /* DMA Mode (2D/1D*)                                                    */
1479
#define SYNC                    0x0020          /* DMA Buffer Clear                                                             */
1480
#define DI_SEL                  0x0040          /* Data Interrupt Timing Select                                 */
1481
#define DI_EN                   0x0080          /* Data Interrupt Enable                                                */
1482
#define NDSIZE_0                0x0000          /* Next Descriptor Size = 0 (Stop/Autobuffer)   */
1483
#define NDSIZE_1                0x0100          /* Next Descriptor Size = 1                                             */
1484
#define NDSIZE_2                0x0200          /* Next Descriptor Size = 2                                             */
1485
#define NDSIZE_3                0x0300          /* Next Descriptor Size = 3                                             */
1486
#define NDSIZE_4                0x0400          /* Next Descriptor Size = 4                                             */
1487
#define NDSIZE_5                0x0500          /* Next Descriptor Size = 5                                             */
1488
#define NDSIZE_6                0x0600          /* Next Descriptor Size = 6                                             */
1489
#define NDSIZE_7                0x0700          /* Next Descriptor Size = 7                                             */
1490
#define NDSIZE_8                0x0800          /* Next Descriptor Size = 8                                             */
1491
#define NDSIZE_9                0x0900          /* Next Descriptor Size = 9                                             */
1492
#define FLOW_STOP               0x0000          /* Stop Mode                                                                    */
1493
#define FLOW_AUTO               0x1000          /* Autobuffer Mode                                                              */
1494
#define FLOW_ARRAY              0x4000          /* Descriptor Array Mode                                                */
1495
#define FLOW_SMALL              0x6000          /* Small Model Descriptor List Mode                             */
1496
#define FLOW_LARGE              0x7000          /* Large Model Descriptor List Mode                             */
1497
 
1498
/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks                                                            */
1499
#define CTYPE                   0x0040  /* DMA Channel Type Indicator (Memory/Peripheral*)      */
1500
#define PMAP                    0xF000  /* Peripheral Mapped To This Channel                            */
1501
#define PMAP_PPI                0x0000  /*              PPI Port DMA                                                            */
1502
#define PMAP_EMACRX             0x1000  /*              Ethernet Receive DMA                                            */
1503
#define PMAP_EMACTX             0x2000  /*              Ethernet Transmit DMA                                           */
1504
#define PMAP_SPORT0RX   0x3000  /*              SPORT0 Receive DMA                                                      */
1505
#define PMAP_SPORT0TX   0x4000  /*              SPORT0 Transmit DMA                                                     */
1506
#define PMAP_SPORT1RX   0x5000  /*              SPORT1 Receive DMA                                                      */
1507
#define PMAP_SPORT1TX   0x6000  /*              SPORT1 Transmit DMA                                                     */
1508
#define PMAP_SPI                0x7000  /*              SPI Port DMA                                                            */
1509
#define PMAP_UART0RX    0x8000  /*              UART0 Port Receive DMA                                          */
1510
#define PMAP_UART0TX    0x9000  /*              UART0 Port Transmit DMA                                         */
1511
#define PMAP_UART1RX    0xA000  /*              UART1 Port Receive DMA                                          */
1512
#define PMAP_UART1TX    0xB000  /*              UART1 Port Transmit DMA                                         */
1513
 
1514
/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks                                            */
1515
#define DMA_DONE                0x0001  /* DMA Completion Interrupt Status      */
1516
#define DMA_ERR                 0x0002  /* DMA Error Interrupt Status           */
1517
#define DFETCH                  0x0004  /* DMA Descriptor Fetch Indicator       */
1518
#define DMA_RUN                 0x0008  /* DMA Channel Running Indicator        */
1519
 
1520
 
1521
/*  ************  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
1522
/*  PPI_CONTROL Masks                                                                                                   */
1523
#define PORT_EN                 0x0001          /* PPI Port Enable                                      */
1524
#define PORT_DIR                0x0002          /* PPI Port Direction                           */
1525
#define XFR_TYPE                0x000C          /* PPI Transfer Type                            */
1526
#define PORT_CFG                0x0030          /* PPI Port Configuration                       */
1527
#define FLD_SEL                 0x0040          /* PPI Active Field Select                      */
1528
#define PACK_EN                 0x0080          /* PPI Packing Mode                                     */
1529
/* previous versions of defBF532.h erroneously included DMA32 (PPI 32-bit DMA Enable) */
1530
#define SKIP_EN                 0x0200          /* PPI Skip Element Enable                      */
1531
#define SKIP_EO                 0x0400          /* PPI Skip Even/Odd Elements           */
1532
#define DLEN_8                  0x0000          /* Data Length = 8 Bits                         */
1533
#define DLEN_10                 0x0800          /* Data Length = 10 Bits                        */
1534
#define DLEN_11                 0x1000          /* Data Length = 11 Bits                        */
1535
#define DLEN_12                 0x1800          /* Data Length = 12 Bits                        */
1536
#define DLEN_13                 0x2000          /* Data Length = 13 Bits                        */
1537
#define DLEN_14                 0x2800          /* Data Length = 14 Bits                        */
1538
#define DLEN_15                 0x3000          /* Data Length = 15 Bits                        */
1539
#define DLEN_16                 0x3800          /* Data Length = 16 Bits                        */
1540
#define POLC                    0x4000          /* PPI Clock Polarity                           */
1541
#define POLS                    0x8000          /* PPI Frame Sync Polarity                      */
1542
 
1543
/* PPI_STATUS Masks                                                                                                             */
1544
#define LT_ERR_OVR      0x0100          /* Line Track Overflow Error    */
1545
#define LT_ERR_UNDR     0x0200          /* Line Track Underflow Error   */
1546
#define FLD                             0x0400          /* Field Indicator                                      */
1547
#define FT_ERR                  0x0800          /* Frame Track Error                            */
1548
#define OVR                             0x1000          /* FIFO Overflow Error                          */
1549
#define UNDR                    0x2000          /* FIFO Underrun Error                          */
1550
#define ERR_DET                 0x4000          /* Error Detected Indicator                     */
1551
#define ERR_NCOR                0x8000          /* Error Not Corrected Indicator        */
1552
 
1553
 
1554
/*  ********************  TWO-WIRE INTERFACE (TWI) MASKS  ***********************/
1555
/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  )                                */
1556
#define CLKLOW(x)       ((x) & 0xFF)            /* Periods Clock Is Held Low                    */
1557
#define CLKHI(y)        (((y)&0xFF)<<0x8)       /* Periods Before New Clock Low                 */
1558
 
1559
/* TWI_PRESCALE Masks                                                                                                                   */
1560
#define PRESCALE        0x007F          /* SCLKs Per Internal Time Reference (10MHz)    */
1561
#define TWI_ENA         0x0080          /* TWI Enable                                                                   */
1562
#define SCCB            0x0200          /* SCCB Compatibility Enable                                    */
1563
 
1564
/* TWI_SLAVE_CTRL Masks                                                                                                                 */
1565
#define SEN                     0x0001          /* Slave Enable                                                                 */
1566
#define SADD_LEN        0x0002          /* Slave Address Length                                                 */
1567
#define STDVAL          0x0004          /* Slave Transmit Data Valid                                    */
1568
#define NAK                     0x0008          /* NAK/ACK* Generated At Conclusion Of Transfer */
1569
#define GEN                     0x0010          /* General Call Adrress Matching Enabled                */
1570
 
1571
/* TWI_SLAVE_STAT Masks                                                                                                                 */
1572
#define SDIR            0x0001          /* Slave Transfer Direction (Transmit/Receive*) */
1573
#define GCALL           0x0002          /* General Call Indicator                                               */
1574
 
1575
/* TWI_MASTER_CTRL Masks                                                                                                        */
1576
#define MEN                     0x0001          /* Master Mode Enable                                           */
1577
#define MADD_LEN        0x0002          /* Master Address Length                                        */
1578
#define MDIR            0x0004          /* Master Transmit Direction (RX/TX*)           */
1579
#define FAST            0x0008          /* Use Fast Mode Timing Specs                           */
1580
#define STOP            0x0010          /* Issue Stop Condition                                         */
1581
#define RSTART          0x0020          /* Repeat Start or Stop* At End Of Transfer     */
1582
#define DCNT            0x3FC0          /* Data Bytes To Transfer                                       */
1583
#define SDAOVR          0x4000          /* Serial Data Override                                         */
1584
#define SCLOVR          0x8000          /* Serial Clock Override                                        */
1585
 
1586
/* TWI_MASTER_STAT Masks                                                                                                                */
1587
#define MPROG           0x0001          /* Master Transfer In Progress                                  */
1588
#define LOSTARB         0x0002          /* Lost Arbitration Indicator (Xfer Aborted)    */
1589
#define ANAK            0x0004          /* Address Not Acknowledged                                             */
1590
#define DNAK            0x0008          /* Data Not Acknowledged                                                */
1591
#define BUFRDERR        0x0010          /* Buffer Read Error                                                    */
1592
#define BUFWRERR        0x0020          /* Buffer Write Error                                                   */
1593
#define SDASEN          0x0040          /* Serial Data Sense                                                    */
1594
#define SCLSEN          0x0080          /* Serial Clock Sense                                                   */
1595
#define BUSBUSY         0x0100          /* Bus Busy Indicator                                                   */
1596
 
1597
/* TWI_INT_SRC and TWI_INT_ENABLE Masks                                         */
1598
#define SINIT           0x0001          /* Slave Transfer Initiated     */
1599
#define SCOMP           0x0002          /* Slave Transfer Complete      */
1600
#define SERR            0x0004          /* Slave Transfer Error         */
1601
#define SOVF            0x0008          /* Slave Overflow                       */
1602
#define MCOMP           0x0010          /* Master Transfer Complete     */
1603
#define MERR            0x0020          /* Master Transfer Error        */
1604
#define XMTSERV         0x0040          /* Transmit FIFO Service        */
1605
#define RCVSERV         0x0080          /* Receive FIFO Service         */
1606
 
1607
/* TWI_FIFO_CTRL Masks                                                                                          */
1608
#define XMTFLUSH        0x0001          /* Transmit Buffer Flush                        */
1609
#define RCVFLUSH        0x0002          /* Receive Buffer Flush                         */
1610
#define XMTINTLEN       0x0004          /* Transmit Buffer Interrupt Length     */
1611
#define RCVINTLEN       0x0008          /* Receive Buffer Interrupt Length      */
1612
 
1613
/* TWI_FIFO_STAT Masks                                                                                                                  */
1614
#define XMTSTAT         0x0003          /* Transmit FIFO Status                                                 */
1615
#define XMT_EMPTY       0x0000          /*              Transmit FIFO Empty                                             */
1616
#define XMT_HALF        0x0001          /*              Transmit FIFO Has 1 Byte To Write               */
1617
#define XMT_FULL        0x0003          /*              Transmit FIFO Full (2 Bytes To Write)   */
1618
 
1619
#define RCVSTAT         0x000C          /* Receive FIFO Status                                                  */
1620
#define RCV_EMPTY       0x0000          /*              Receive FIFO Empty                                              */
1621
#define RCV_HALF        0x0004          /*              Receive FIFO Has 1 Byte To Read                 */
1622
#define RCV_FULL        0x000C          /*              Receive FIFO Full (2 Bytes To Read)             */
1623
 
1624
 
1625
/* Omit CAN masks from defBF534.h */
1626
 
1627
/*  *******************  PIN CONTROL REGISTER MASKS  ************************/
1628
/* PORT_MUX Masks                                                                                                                       */
1629
#define PJSE                    0x0001                  /* Port J SPI/SPORT Enable                      */
1630
#define PJSE_SPORT              0x0000                  /*              Enable TFS0/DT0PRI                      */
1631
#define PJSE_SPI                0x0001                  /*              Enable SPI_SSEL3:2                      */
1632
 
1633
#define PJCE(x)                 (((x)&0x3)<<1)  /* Port J CAN/SPI/SPORT Enable          */
1634
#define PJCE_SPORT              0x0000                  /*              Enable DR0SEC/DT0SEC            */
1635
#define PJCE_CAN                0x0002                  /*              Enable CAN RX/TX                        */
1636
#define PJCE_SPI                0x0004                  /*              Enable SPI_SSEL7                        */
1637
 
1638
#define PFDE                    0x0008                  /* Port F DMA Request Enable            */
1639
#define PFDE_UART               0x0000                  /*              Enable UART0 RX/TX                      */
1640
#define PFDE_DMA                0x0008                  /*              Enable DMAR1:0                          */
1641
 
1642
#define PFTE                    0x0010                  /* Port F Timer Enable                          */
1643
#define PFTE_UART               0x0000                  /*              Enable UART1 RX/TX                      */
1644
#define PFTE_TIMER              0x0010                  /*              Enable TMR7:6                           */
1645
 
1646
#define PFS6E                   0x0020                  /* Port F SPI SSEL 6 Enable                     */
1647
#define PFS6E_TIMER             0x0000                  /*              Enable TMR5                                     */
1648
#define PFS6E_SPI               0x0020                  /*              Enable SPI_SSEL6                        */
1649
 
1650
#define PFS5E                   0x0040                  /* Port F SPI SSEL 5 Enable                     */
1651
#define PFS5E_TIMER             0x0000                  /*              Enable TMR4                                     */
1652
#define PFS5E_SPI               0x0040                  /*              Enable SPI_SSEL5                        */
1653
 
1654
#define PFS4E                   0x0080                  /* Port F SPI SSEL 4 Enable                     */
1655
#define PFS4E_TIMER             0x0000                  /*              Enable TMR3                                     */
1656
#define PFS4E_SPI               0x0080                  /*              Enable SPI_SSEL4                        */
1657
 
1658
#define PFFE                    0x0100                  /* Port F PPI Frame Sync Enable         */
1659
#define PFFE_TIMER              0x0000                  /*              Enable TMR2                                     */
1660
#define PFFE_PPI                0x0100                  /*              Enable PPI FS3                          */
1661
 
1662
#define PGSE                    0x0200                  /* Port G SPORT1 Secondary Enable       */
1663
#define PGSE_PPI                0x0000                  /*              Enable PPI D9:8                         */
1664
#define PGSE_SPORT              0x0200                  /*              Enable DR1SEC/DT1SEC            */
1665
 
1666
#define PGRE                    0x0400                  /* Port G SPORT1 Receive Enable         */
1667
#define PGRE_PPI                0x0000                  /*              Enable PPI D12:10                       */
1668
#define PGRE_SPORT              0x0400                  /*              Enable DR1PRI/RFS1/RSCLK1       */
1669
 
1670
#define PGTE                    0x0800                  /* Port G SPORT1 Transmit Enable        */
1671
#define PGTE_PPI                0x0000                  /*              Enable PPI D15:13                       */
1672
#define PGTE_SPORT              0x0800                  /*              Enable DT1PRI/TFS1/TSCLK1       */
1673
 
1674
 
1675
/*  ******************  HANDSHAKE DMA (HMDMA) MASKS  *********************/
1676
/* HMDMAx_CTL Masks                                                                                                             */
1677
#define HMDMAEN         0x0001  /* Enable Handshake DMA 0/1                                     */
1678
#define REP                     0x0002  /* HMDMA Request Polarity                                       */
1679
#define UTE                     0x0004  /* Urgency Threshold Enable                                     */
1680
#define OIE                     0x0010  /* Overflow Interrupt Enable                            */
1681
#define BDIE            0x0020  /* Block Done Interrupt Enable                          */
1682
#define MBDI            0x0040  /* Mask Block Done IRQ If Pending ECNT          */
1683
#define DRQ                     0x0300  /* HMDMA Request Type                                           */
1684
#define DRQ_NONE        0x0000  /*              No Request                                                      */
1685
#define DRQ_SINGLE      0x0100  /*              Channels Request Single                         */
1686
#define DRQ_MULTI       0x0200  /*              Channels Request Multi (Default)        */
1687
#define DRQ_URGENT      0x0300  /*              Channels Request Multi Urgent           */
1688
#define RBC                     0x1000  /* Reload BCNT With IBCNT                                       */
1689
#define PS                      0x2000  /* HMDMA Pin Status                                                     */
1690
#define OI                      0x4000  /* Overflow Interrupt Generated                         */
1691
#define BDI                     0x8000  /* Block Done Interrupt Generated                       */
1692
 
1693
/* entry addresses of the user-callable Boot ROM functions */
1694
 
1695
#define _BOOTROM_RESET 0xEF000000
1696
#define _BOOTROM_FINAL_INIT 0xEF000002
1697
#define _BOOTROM_DO_MEMORY_DMA 0xEF000006
1698
#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
1699
#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
1700
#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
1701
#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
1702
#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
1703
#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
1704
 
1705
/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
1706
#define PGDE_UART   PFDE_UART
1707
#define PGDE_DMA    PFDE_DMA
1708
#define CKELOW          SCKELOW
1709
 
1710
/* ==== end from defBF534.h ==== */
1711
 
1712
/* HOST Port Registers */
1713
 
1714
#define                     HOST_CONTROL  0xffc03400   /* HOSTDP Control Register */
1715
#define                      HOST_STATUS  0xffc03404   /* HOSTDP Status Register */
1716
#define                     HOST_TIMEOUT  0xffc03408   /* HOSTDP Acknowledge Mode Timeout Register */
1717
 
1718
/* Counter Registers */
1719
 
1720
#define                       CNT_CONFIG  0xffc03500   /* Configuration Register */
1721
#define                        CNT_IMASK  0xffc03504   /* Interrupt Mask Register */
1722
#define                       CNT_STATUS  0xffc03508   /* Status Register */
1723
#define                      CNT_COMMAND  0xffc0350c   /* Command Register */
1724
#define                     CNT_DEBOUNCE  0xffc03510   /* Debounce Register */
1725
#define                      CNT_COUNTER  0xffc03514   /* Counter Register */
1726
#define                          CNT_MAX  0xffc03518   /* Maximal Count Register */
1727
#define                          CNT_MIN  0xffc0351c   /* Minimal Count Register */
1728
 
1729
/* OTP/FUSE Registers */
1730
 
1731
#define                      OTP_CONTROL  0xffc03600   /* OTP/Fuse Control Register */
1732
#define                          OTP_BEN  0xffc03604   /* OTP/Fuse Byte Enable */
1733
#define                       OTP_STATUS  0xffc03608   /* OTP/Fuse Status */
1734
#define                       OTP_TIMING  0xffc0360c   /* OTP/Fuse Access Timing */
1735
 
1736
/* Security Registers */
1737
 
1738
#define                    SECURE_SYSSWT  0xffc03620   /* Secure System Switches */
1739
#define                   SECURE_CONTROL  0xffc03624   /* Secure Control */
1740
#define                    SECURE_STATUS  0xffc03628   /* Secure Status */
1741
 
1742
/* OTP Read/Write Data Buffer Registers */
1743
 
1744
#define                        OTP_DATA0  0xffc03680   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
1745
#define                        OTP_DATA1  0xffc03684   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
1746
#define                        OTP_DATA2  0xffc03688   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
1747
#define                        OTP_DATA3  0xffc0368c   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
1748
 
1749
/* NFC Registers */
1750
 
1751
#define                          NFC_CTL  0xffc03700   /* NAND Control Register */
1752
#define                         NFC_STAT  0xffc03704   /* NAND Status Register */
1753
#define                      NFC_IRQSTAT  0xffc03708   /* NAND Interrupt Status Register */
1754
#define                      NFC_IRQMASK  0xffc0370c   /* NAND Interrupt Mask Register */
1755
#define                         NFC_ECC0  0xffc03710   /* NAND ECC Register 0 */
1756
#define                         NFC_ECC1  0xffc03714   /* NAND ECC Register 1 */
1757
#define                         NFC_ECC2  0xffc03718   /* NAND ECC Register 2 */
1758
#define                         NFC_ECC3  0xffc0371c   /* NAND ECC Register 3 */
1759
#define                        NFC_COUNT  0xffc03720   /* NAND ECC Count Register */
1760
#define                          NFC_RST  0xffc03724   /* NAND ECC Reset Register */
1761
#define                        NFC_PGCTL  0xffc03728   /* NAND Page Control Register */
1762
#define                         NFC_READ  0xffc0372c   /* NAND Read Data Register */
1763
#define                         NFC_ADDR  0xffc03740   /* NAND Address Register */
1764
#define                          NFC_CMD  0xffc03744   /* NAND Command Register */
1765
#define                      NFC_DATA_WR  0xffc03748   /* NAND Data Write Register */
1766
#define                      NFC_DATA_RD  0xffc0374c   /* NAND Data Read Register */
1767
 
1768
/* ********************************************************** */
1769
/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
1770
/*     and MULTI BIT READ MACROS                              */
1771
/* ********************************************************** */
1772
 
1773
/* Bit masks for HOST_CONTROL */
1774
 
1775
#define                 HOSTDP_EN  0x1        /* HOSTDP Enable */
1776
#define                nHOSTDP_EN  0x0
1777
#define                HOSTDP_END  0x2        /* Host Endianess */
1778
#define               nHOSTDP_END  0x0
1779
#define          HOSTDP_DATA_SIZE  0x4        /* Data Size */
1780
#define         nHOSTDP_DATA_SIZE  0x0
1781
#define                HOSTDP_RST  0x8        /* HOSTDP Reset */
1782
#define               nHOSTDP_RST  0x0
1783
#define                  HRDY_OVR  0x20       /* HRDY Override */
1784
#define                 nHRDY_OVR  0x0
1785
#define                  INT_MODE  0x40       /* Interrupt Mode */
1786
#define                 nINT_MODE  0x0
1787
#define                     BT_EN  0x80       /* Bus Timeout Enable */
1788
#define                    nBT_EN  0x0
1789
#define                       EHW  0x100      /* Enable Host Write */
1790
#define                      nEHW  0x0
1791
#define                       EHR  0x200      /* Enable Host Read */
1792
#define                      nEHR  0x0
1793
#define                       BDR  0x400      /* Burst DMA Requests */
1794
#define                      nBDR  0x0
1795
 
1796
/* Bit masks for HOST_STATUS */
1797
 
1798
#define                   DMA_RDY  0x1        /* DMA Ready */
1799
#define                  nDMA_RDY  0x0
1800
#define                  FIFOFULL  0x2        /* FIFO Full */
1801
#define                 nFIFOFULL  0x0
1802
#define                 FIFOEMPTY  0x4        /* FIFO Empty */
1803
#define                nFIFOEMPTY  0x0
1804
#define                 DMA_CMPLT  0x8        /* DMA Complete */
1805
#define                nDMA_CMPLT  0x0
1806
#define                      HSHK  0x10       /* Host Handshake */
1807
#define                     nHSHK  0x0
1808
#define               HOSTDP_TOUT  0x20       /* HOSTDP Timeout */
1809
#define              nHOSTDP_TOUT  0x0
1810
#define                      HIRQ  0x40       /* Host Interrupt Request */
1811
#define                     nHIRQ  0x0
1812
#define                ALLOW_CNFG  0x80       /* Allow New Configuration */
1813
#define               nALLOW_CNFG  0x0
1814
#define                   DMA_DIR  0x100      /* DMA Direction */
1815
#define                  nDMA_DIR  0x0
1816
#define                       BTE  0x200      /* Bus Timeout Enabled */
1817
#define                      nBTE  0x0
1818
#define               HOSTRD_DONE  0x8000     /* Host Read Completion Interrupt */
1819
#define              nHOSTRD_DONE  0x0
1820
 
1821
/* Bit masks for HOST_TIMEOUT */
1822
 
1823
#define             COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
1824
 
1825
/* Bit masks for CNT_CONFIG */
1826
 
1827
#define                      CNTE  0x1        /* Counter Enable */
1828
#define                     nCNTE  0x0
1829
#define                      DEBE  0x2        /* Debounce Enable */
1830
#define                     nDEBE  0x0
1831
#define                    CDGINV  0x10       /* CDG Pin Polarity Invert */
1832
#define                   nCDGINV  0x0
1833
#define                    CUDINV  0x20       /* CUD Pin Polarity Invert */
1834
#define                   nCUDINV  0x0
1835
#define                    CZMINV  0x40       /* CZM Pin Polarity Invert */
1836
#define                   nCZMINV  0x0
1837
#define                   CNTMODE  0x700      /* Counter Operating Mode */
1838
#define                      ZMZC  0x800      /* CZM Zeroes Counter Enable */
1839
#define                     nZMZC  0x0
1840
#define                   BNDMODE  0x3000     /* Boundary register Mode */
1841
#define                    INPDIS  0x8000     /* CUG and CDG Input Disable */
1842
#define                   nINPDIS  0x0
1843
 
1844
/* Bit masks for CNT_IMASK */
1845
 
1846
#define                      ICIE  0x1        /* Illegal Gray/Binary Code Interrupt Enable */
1847
#define                     nICIE  0x0
1848
#define                      UCIE  0x2        /* Up count Interrupt Enable */
1849
#define                     nUCIE  0x0
1850
#define                      DCIE  0x4        /* Down count Interrupt Enable */
1851
#define                     nDCIE  0x0
1852
#define                    MINCIE  0x8        /* Min Count Interrupt Enable */
1853
#define                   nMINCIE  0x0
1854
#define                    MAXCIE  0x10       /* Max Count Interrupt Enable */
1855
#define                   nMAXCIE  0x0
1856
#define                   COV31IE  0x20       /* Bit 31 Overflow Interrupt Enable */
1857
#define                  nCOV31IE  0x0
1858
#define                   COV15IE  0x40       /* Bit 15 Overflow Interrupt Enable */
1859
#define                  nCOV15IE  0x0
1860
#define                   CZEROIE  0x80       /* Count to Zero Interrupt Enable */
1861
#define                  nCZEROIE  0x0
1862
#define                     CZMIE  0x100      /* CZM Pin Interrupt Enable */
1863
#define                    nCZMIE  0x0
1864
#define                    CZMEIE  0x200      /* CZM Error Interrupt Enable */
1865
#define                   nCZMEIE  0x0
1866
#define                    CZMZIE  0x400      /* CZM Zeroes Counter Interrupt Enable */
1867
#define                   nCZMZIE  0x0
1868
 
1869
/* Bit masks for CNT_STATUS */
1870
 
1871
#define                      ICII  0x1        /* Illegal Gray/Binary Code Interrupt Identifier */
1872
#define                     nICII  0x0
1873
#define                      UCII  0x2        /* Up count Interrupt Identifier */
1874
#define                     nUCII  0x0
1875
#define                      DCII  0x4        /* Down count Interrupt Identifier */
1876
#define                     nDCII  0x0
1877
#define                    MINCII  0x8        /* Min Count Interrupt Identifier */
1878
#define                   nMINCII  0x0
1879
#define                    MAXCII  0x10       /* Max Count Interrupt Identifier */
1880
#define                   nMAXCII  0x0
1881
#define                   COV31II  0x20       /* Bit 31 Overflow Interrupt Identifier */
1882
#define                  nCOV31II  0x0
1883
#define                   COV15II  0x40       /* Bit 15 Overflow Interrupt Identifier */
1884
#define                  nCOV15II  0x0
1885
#define                   CZEROII  0x80       /* Count to Zero Interrupt Identifier */
1886
#define                  nCZEROII  0x0
1887
#define                     CZMII  0x100      /* CZM Pin Interrupt Identifier */
1888
#define                    nCZMII  0x0
1889
#define                    CZMEII  0x200      /* CZM Error Interrupt Identifier */
1890
#define                   nCZMEII  0x0
1891
#define                    CZMZII  0x400      /* CZM Zeroes Counter Interrupt Identifier */
1892
#define                   nCZMZII  0x0
1893
 
1894
/* Bit masks for CNT_COMMAND */
1895
 
1896
#define                    W1LCNT  0xf        /* Load Counter Register */
1897
#define                    W1LMIN  0xf0       /* Load Min Register */
1898
#define                    W1LMAX  0xf00      /* Load Max Register */
1899
#define                  W1ZMONCE  0x1000     /* Enable CZM Clear Counter Once */
1900
#define                 nW1ZMONCE  0x0
1901
 
1902
/* Bit masks for CNT_DEBOUNCE */
1903
 
1904
#define                 DPRESCALE  0xf        /* Load Counter Register */
1905
 
1906
/* Bit masks for OTP_CONTROL */
1907
 
1908
#define                FUSE_FADDR  0x1ff      /* OTP/Fuse Address */
1909
#define                      FIEN  0x800      /* OTP/Fuse Interrupt Enable */
1910
#define                     nFIEN  0x0
1911
#define                  FTESTDEC  0x1000     /* OTP/Fuse Test Decoder */
1912
#define                 nFTESTDEC  0x0
1913
#define                   FWRTEST  0x2000     /* OTP/Fuse Write Test */
1914
#define                  nFWRTEST  0x0
1915
#define                     FRDEN  0x4000     /* OTP/Fuse Read Enable */
1916
#define                    nFRDEN  0x0
1917
#define                     FWREN  0x8000     /* OTP/Fuse Write Enable */
1918
#define                    nFWREN  0x0
1919
 
1920
/* Bit masks for OTP_BEN */
1921
 
1922
#define                      FBEN  0xffff     /* OTP/Fuse Byte Enable */
1923
 
1924
/* Bit masks for OTP_STATUS */
1925
 
1926
#define                     FCOMP  0x1        /* OTP/Fuse Access Complete */
1927
#define                    nFCOMP  0x0
1928
#define                    FERROR  0x2        /* OTP/Fuse Access Error */
1929
#define                   nFERROR  0x0
1930
#define                  MMRGLOAD  0x10       /* Memory Mapped Register Gasket Load */
1931
#define                 nMMRGLOAD  0x0
1932
#define                  MMRGLOCK  0x20       /* Memory Mapped Register Gasket Lock */
1933
#define                 nMMRGLOCK  0x0
1934
#define                    FPGMEN  0x40       /* OTP/Fuse Program Enable */
1935
#define                   nFPGMEN  0x0
1936
 
1937
/* Bit masks for OTP_TIMING */
1938
 
1939
#define                   USECDIV  0xff       /* Micro Second Divider */
1940
#define                   READACC  0x7f00     /* Read Access Time */
1941
#define                   CPUMPRL  0x38000    /* Charge Pump Release Time */
1942
#define                   CPUMPSU  0xc0000    /* Charge Pump Setup Time */
1943
#define                   CPUMPHD  0xf00000   /* Charge Pump Hold Time */
1944
#define                   PGMTIME  0xff000000 /* Program Time */
1945
 
1946
/* Bit masks for SECURE_SYSSWT */
1947
 
1948
#define                   EMUDABL  0x1        /* Emulation Disable. */
1949
#define                  nEMUDABL  0x0
1950
#define                   RSTDABL  0x2        /* Reset Disable */
1951
#define                  nRSTDABL  0x0
1952
#define                   L1IDABL  0x1c       /* L1 Instruction Memory Disable. */
1953
#define                  L1DADABL  0xe0       /* L1 Data Bank A Memory Disable. */
1954
#define                  L1DBDABL  0x700      /* L1 Data Bank B Memory Disable. */
1955
#define                   DMA0OVR  0x800      /* DMA0 Memory Access Override */
1956
#define                  nDMA0OVR  0x0
1957
#define                   DMA1OVR  0x1000     /* DMA1 Memory Access Override */
1958
#define                  nDMA1OVR  0x0
1959
#define                    EMUOVR  0x4000     /* Emulation Override */
1960
#define                   nEMUOVR  0x0
1961
#define                    OTPSEN  0x8000     /* OTP Secrets Enable. */
1962
#define                   nOTPSEN  0x0
1963
#define                    L2DABL  0x70000    /* L2 Memory Disable. */
1964
 
1965
/* Bit masks for SECURE_CONTROL */
1966
 
1967
#define                   SECURE0  0x1        /* SECURE 0 */
1968
#define                  nSECURE0  0x0
1969
#define                   SECURE1  0x2        /* SECURE 1 */
1970
#define                  nSECURE1  0x0
1971
#define                   SECURE2  0x4        /* SECURE 2 */
1972
#define                  nSECURE2  0x0
1973
#define                   SECURE3  0x8        /* SECURE 3 */
1974
#define                  nSECURE3  0x0
1975
 
1976
/* Bit masks for SECURE_STATUS */
1977
 
1978
#define                   SECMODE  0x3        /* Secured Mode Control State */
1979
#define                       NMI  0x4        /* Non Maskable Interrupt */
1980
#define                      nNMI  0x0
1981
#define                   AFVALID  0x8        /* Authentication Firmware Valid */
1982
#define                  nAFVALID  0x0
1983
#define                    AFEXIT  0x10       /* Authentication Firmware Exit */
1984
#define                   nAFEXIT  0x0
1985
#define                   SECSTAT  0xe0       /* Secure Status */
1986
 
1987
/* Bit masks for NFC_CTL */
1988
 
1989
#define                    WR_DLY  0xf        /* Write Strobe Delay */
1990
#define                    RD_DLY  0xf0       /* Read Strobe Delay */
1991
#define                   PG_SIZE  0x200      /* Page Size */
1992
#define                  nPG_SIZE  0x0
1993
 
1994
/* Bit masks for NFC_STAT */
1995
 
1996
#define                     NBUSY  0x1        /* Not Busy */
1997
#define                    nNBUSY  0x0
1998
#define                   WB_FULL  0x2        /* Write Buffer Full */
1999
#define                  nWB_FULL  0x0
2000
#define                PG_WR_STAT  0x4        /* Page Write Pending */
2001
#define               nPG_WR_STAT  0x0
2002
#define                PG_RD_STAT  0x8        /* Page Read Pending */
2003
#define               nPG_RD_STAT  0x0
2004
#define                  WB_EMPTY  0x10       /* Write Buffer Empty */
2005
#define                 nWB_EMPTY  0x0
2006
 
2007
/* Bit masks for NFC_IRQSTAT */
2008
 
2009
#define                  NBUSYIRQ  0x1        /* Not Busy IRQ */
2010
#define                 nNBUSYIRQ  0x0
2011
#define                    WB_OVF  0x2        /* Write Buffer Overflow */
2012
#define                   nWB_OVF  0x0
2013
#define                   WB_EDGE  0x4        /* Write Buffer Edge Detect */
2014
#define                  nWB_EDGE  0x0
2015
#define                    RD_RDY  0x8        /* Read Data Ready */
2016
#define                   nRD_RDY  0x0
2017
#define                   WR_DONE  0x10       /* Page Write Done */
2018
#define                  nWR_DONE  0x0
2019
 
2020
/* Bit masks for NFC_IRQMASK */
2021
 
2022
#define              MASK_BUSYIRQ  0x1        /* Mask Not Busy IRQ */
2023
#define             nMASK_BUSYIRQ  0x0
2024
#define                MASK_WBOVF  0x2        /* Mask Write Buffer Overflow */
2025
#define               nMASK_WBOVF  0x0
2026
#define               MASK_WBEDGE  0x4        /* Mask Write Buffer Edge Detect */
2027
#define              nMASK_WBEDGE  0x0
2028
#define                MASK_RDRDY  0x8        /* Mask Read Data Ready */
2029
#define               nMASK_RDRDY  0x0
2030
#define               MASK_WRDONE  0x10       /* Mask Write Done */
2031
#define              nMASK_WRDONE  0x0
2032
 
2033
/* Bit masks for NFC_RST */
2034
 
2035
#define                   ECC_RST  0x1        /* ECC (and NFC counters) Reset */
2036
#define                  nECC_RST  0x0
2037
 
2038
/* Bit masks for NFC_PGCTL */
2039
 
2040
#define               PG_RD_START  0x1        /* Page Read Start */
2041
#define              nPG_RD_START  0x0
2042
#define               PG_WR_START  0x2        /* Page Write Start */
2043
#define              nPG_WR_START  0x0
2044
 
2045
/* Bit masks for NFC_ECC0 */
2046
 
2047
#define                      ECC0  0x7ff      /* Parity Calculation Result0 */
2048
 
2049
/* Bit masks for NFC_ECC1 */
2050
 
2051
#define                      ECC1  0x7ff      /* Parity Calculation Result1 */
2052
 
2053
/* Bit masks for NFC_ECC2 */
2054
 
2055
#define                      ECC2  0x7ff      /* Parity Calculation Result2 */
2056
 
2057
/* Bit masks for NFC_ECC3 */
2058
 
2059
#define                      ECC3  0x7ff      /* Parity Calculation Result3 */
2060
 
2061
/* Bit masks for NFC_COUNT */
2062
 
2063
#define                    ECCCNT  0x3ff      /* Transfer Count */
2064
 
2065
#ifdef _MISRA_RULES
2066
#pragma diag(pop)
2067
#endif /* _MISRA_RULES */
2068
 
2069
#endif /* _DEF_BF52X_H */

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.