Subversion Repositories openrisc

/* Stand-alone library for M32R-EVA board.

 *

 * Copyright (c) 1996, 1998 Cygnus Support

 *

 * The authors hereby grant permission to use, copy, modify, distribute,

 * and license this software and its documentation for any purpose, provided

 * that existing copyright notices are retained in all copies and that this

 * notice is included verbatim in any distributions. No written agreement,

 * license, or royalty fee is required for any of the authorized uses.

 * Modifications to this software may be copyrighted by their authors

 * and need not follow the licensing terms described here, provided that

 * the new terms are clearly indicated on the first page of each file where

 * they apply.

 */

/* #define REVC to enable handling of the original RevC board,

   which is no longer the default, nor is it supported.  */

#ifndef REVC

/* Serial I/O routines for MSA2000G01 board */

#define UART_INCHAR_ADDR        0xff004009

#define UART_OUTCHR_ADDR        0xff004007

#define UART_STATUS_ADDR        0xff004002

#else

/* Serial I/O routines for M32R-EVA board */

#define UART_INCHAR_ADDR        0xff102013

#define UART_OUTCHR_ADDR        0xff10200f

#define UART_STATUS_ADDR        0xff102006

#endif

#define UART_INPUT_EMPTY        0x4

#define UART_OUTPUT_EMPTY       0x1

static volatile char  *rx_port   = (unsigned char *)  UART_INCHAR_ADDR;

static volatile char  *tx_port   = (char *)  UART_OUTCHR_ADDR;

static volatile short *rx_status = (short *) UART_STATUS_ADDR;

static volatile short *tx_status = (short *) UART_STATUS_ADDR;

static int

rx_rdy()

{

#ifndef REVC

  return (*rx_status & UART_INPUT_EMPTY);

#else

  return !(*rx_status & UART_INPUT_EMPTY);

#endif

}

static int

tx_rdy()

{

  return (*tx_status & UART_OUTPUT_EMPTY);

}

static unsigned char

rx_uchar()

{

  return *rx_port;

}

void

tx_char(char c)

{

  *tx_port = c;

}

int

getDebugChar()

{

  while (!rx_rdy())

    ;

  return rx_uchar();

}

void

putDebugChar(int c)

{

  while (!tx_rdy())

    ;

  tx_char(c);

}

void mesg(char *p)

{

  while (*p)

    {

      if (*p == '\n')

        putDebugChar('\r');

      putDebugChar(*p++);

    }

}

void phex(long x)

{

  char buf[9];

  int i;

  buf[8] = '\0';

  for (i = 7; i >= 0; i--)

    {

      char c = x & 0x0f;

      buf[i] = c < 10 ? c + '0' : c - 10 + 'A';

      x >>= 4;

    }

  mesg(buf);

}

/*

 * These routines set and get exception handlers.  They look a little

 * funny because the M32R uses branch instructions in its exception

 * vectors, not just the addresses.  The instruction format used is

 * BRA pcdisp24.

 */

#define TRAP_VECTOR_BASE_ADDR   0x00000040

/* Setup trap TT to go to ROUTINE. */

void

exceptionHandler (int tt, unsigned long routine)

{

#ifndef REVC

  unsigned long *tb = (unsigned long *) TRAP_VECTOR_BASE_ADDR;

  tb[tt] = (0xff000000 | ((routine - (unsigned long) (&tb[tt])) >> 2));

#else

  unsigned long *tb = 0; /* Trap vector base address */

  tb[tt] = ((routine >> 2) | 0xff000000) - tt;

#endif

}

/* Return the address of trap TT handler */

unsigned long

getExceptionHandler (int tt)

{

#ifndef REVC

  unsigned long *tb = (unsigned long *) TRAP_VECTOR_BASE_ADDR;

  return ((tb[tt] & ~0xff000000) << 2) + (unsigned long) (&tb[tt]);

#else

  unsigned long *tb = 0; /* Trap vector base address */

  return ((tb[tt] + tt) | 0xff000000) << 2;

#endif

}