Subversion Repositories openrisc

/*

 * $Header: /cvs/src/src/libgloss/mt/startup-16-003.S,v 1.2 2006/03/22 12:47:59 nathan Exp $

 *

 * interrupt_vectors.s -- the interrupt handler jump table.

 *

 *

 * There are a total of 32 interrupt vector possible, however, only

 *   11 of those are currently used (the others are reserved). The

 *   order of vectors is as follows:

 *

 *     1. Boot Vector. Vector for power-on/reset.

 *     2. Software Vector. Vector for handling the SI instruction (an

 *          explicit interrupt caused by software).

 *     3. Break Vector. Vector for handling the Break instruction.

 *     4. Device 0 Vector. Service vector for device zero.

 *     5. Device 1 Vector. Service vector for device one.

 *     6. Device 2 Vector. Service vector for device two.

 *     7. Device 3 Vector. Service vector for device three.

 *     8. Device 4 Vector. Service vector for device four.

 *     9. Device 5 Vector. Service vector for device five.

 *    10. Device 6 Vector. Service vector for device six.

 *    11. Device 7 Vector. Service vector for device seven.

 *

 *   The rest of the interrupt vectors are reserved for future use.

 *

 *

 * Each jump table entry consists of the following two instructions:

 *

 *   jmp Label          ; Label as appropriate

 *   nop                ; implemented as or r0,r0,r0

 *

 *   The following labels are reserved for the vectors named above,

 *   respectively:

 *

 *     _BOOTIVEC, _SOFTIVEC, _BRKIVEC, _DEV0IVEC, _DEV1IVEC, _DEV2IVEC,

 *     _DEV3IVEC, _DEV4IVEC, _DEV5IVEC, _DEV6IVEC, _DEV7IVEC

 *

 *   09Jan04 (DJK) Modified internal I/O port definitions for the

 *                   MS1-16-003.

 *

 *   10Oct01 (DJK) The memory map is finalized and the first 4K of address

 *                   space is now reserved for memory-mapped I/O devices.

 *                   (There is over 2K unused, reserved space in this area.)

 *

 *   26Sep01 (DJK) The memory map is changed and the device interrupts are

 *                   now memory-mapped.

 *

 *

 *

 * Copyright (c) 2001, 2002, 2003, 2004 Morpho Technologies

 *

 */

        .section .startup, "a", @progbits

        .global __boot_start

__boot_start:

_INTERRUPT_VECTOR_TABLE:

        jmp     _BOOTIVEC               ; Boot vector

        or      r0, r0, r0

        jmp     _SOFTIVEC               ; Vector for SI instruction

        or      r0,r0,r0

        jmp     _BRKIVEC                ; Vector for Break instruction

        or      r0,r0,r0

        ; The illegal instruction trap is not implemented.

        ;jmp    _ILLIVEC                ; Vector for illegal instruction

        or      r0,r0,r0

        or      r0,r0,r0

_RESERVED1_IVEC:

        jmp     _RESERVED1_IVEC

        or      r0,r0,r0

_RESERVED2_IVEC:

        jmp     _RESERVED2_IVEC

        or      r0,r0,r0

_RESERVED3_IVEC:

        jmp     _RESERVED3_IVEC

        or      r0,r0,r0

_RESERVED4_IVEC:

        jmp     _RESERVED4_IVEC

        or      r0,r0,r0

        .text

        .equ SI_IOPORT_ADR, _DEBUG_SW_SYSREQ_REG

        .equ SI_IOPORT_BIT, 0x1

        .equ BRK_IOPORT_ADR, _DEBUG_BREAK_REG

        .equ BRK_IOPORT_BIT, 0x1

        .global _BOOTIVEC

_BOOTIVEC:

        ; Initialize the interrupt controller's interrupt vector registers

        ldui    r1, #%hi16(_IVEC_DEFAULT)

        ori     r1, r1, #%lo16(_IVEC_DEFAULT)

        stw     r1, r0, #%lo16(_DEV0_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV1_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV2_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV3_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV4_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV5_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV6_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV7_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV8_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV9_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV10_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV11_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV12_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV13_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV14_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV15_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV16_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV17_INTERRUPT_REG)

        stw     r1, r0, #%lo16(_DEV18_INTERRUPT_REG)

        ; Statically initialized data must be copied from ROM to RAM.

        ; This is done in the C run-time start-up code (crt0.o).

        ; Jump to the beginning of the application and enable interrupts.

        jmp     _start

        ei

        ; Handler for the SI instruction. To perform a system call, the

        ; C model uses a trapping mechanism which executes an SI instruction.

        ; The Morpho Technologies simulator simply performs a branch to

        ; this vector to simulate the SI instruction (this is as the hardware

        ; behaves). In order to trigger the simulator that a system call

        ; is needed a write into the I/O register at address $40005 to

        ; set bit #2 (0x4) is necessary.

        ;

        ; The above address has been changed to 0x00031C and the bit number

        ; is zero. (The manifest constants have been changed to reflect this.)

        .global _SOFTIVEC

_SOFTIVEC:

        ; Build a frame to save registers.

        subi    sp, sp, #$8

        stw     r9, sp, #$4

        ldui    r9, #%hi16(SI_IOPORT_ADR)

        stw     r10, sp, #$0

        ori     r9, r9, #%lo16(SI_IOPORT_ADR)

        ori     r10, r0, #SI_IOPORT_BIT

        stw     r10, r9, #$0

        ; SYS_call is handled by simulator here...

        or      r0, r0, r0

        ldw     r10, sp, #$0

        or      r0, r0, r0

        ldw     r9, sp, #$4

        reti    r14

        addi    sp, sp, #$8

        .global _BRKIVEC

_BRKIVEC:

        ; Build a frame to save registers.

        subi    sp, sp, #$8

        stw     r9, sp, #$4

        ldui    r9, #%hi16(BRK_IOPORT_ADR)

        stw     r10, sp, #$0

        ori     r9, r9, #%lo16(BRK_IOPORT_ADR)

        ori     r10, r0, #BRK_IOPORT_BIT

        stw     r10, r9, #$0

        or      r0, r0, r0

        or      r0, r0, r0

        or      r0, r0, r0

        or      r0, r0, r0

        or      r0, r0, r0

        ldw     r10, sp, #$0

        ldw     r9, sp, #$4

        reti    r15

        addi    sp, sp, #$8

.if 0

        ; Handler for illegal instruction.

        .global _ILLIVEC

_ILLIVEC:

        reti r15

        or r0, r0, r0

.endif

        .global _IVEC_DEFAULT

_IVEC_DEFAULT:

        reti    r15

        or      r0, r0, r0

        .section .internal_io, "a", @nobits

        .fill 256               ; Fill the first page.

        ; This is the memory-mapped I/O region.

        ; Hardware Interrupt Registers

        ;.org 0xfffff100

        .global _DEV0_INTERRUPT_REG

_DEV0_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV1_INTERRUPT_REG

_DEV1_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV2_INTERRUPT_REG

_DEV2_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV3_INTERRUPT_REG

_DEV3_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV4_INTERRUPT_REG

_DEV4_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV5_INTERRUPT_REG

_DEV5_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV6_INTERRUPT_REG

_DEV6_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV7_INTERRUPT_REG

_DEV7_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV8_INTERRUPT_REG

_DEV8_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV9_INTERRUPT_REG

_DEV9_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV10_INTERRUPT_REG

_DEV10_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV11_INTERRUPT_REG

_DEV11_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV12_INTERRUPT_REG

_DEV12_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV13_INTERRUPT_REG

_DEV13_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV14_INTERRUPT_REG

_DEV14_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV15_INTERRUPT_REG

_DEV15_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV16_INTERRUPT_REG

_DEV16_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV17_INTERRUPT_REG

_DEV17_INTERRUPT_REG:

        .word 0x00000000

        .global _DEV18_INTERRUPT_REG

_DEV18_INTERRUPT_REG:

        .word 0x00000000

        ; 128 bytes minus nineteen registers (four bytes per register)

        .fill (128 - 19 * 4)

        .global _INTERRUPT_MASK_REG

_INTERRUPT_MASK_REG:

        .word 0x00000000

        .global _INTERRUPT_PENDING_REG

_INTERRUPT_PENDING_REG:

        .word 0x00000000

        ; 16 bytes minus two registers (four bytes per register)

        .fill (16 - 2 * 4)

        .global _DEV0_INTERRUPT_LEVEL_REG

_DEV0_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV1_INTERRUPT_LEVEL_REG

_DEV1_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV2_INTERRUPT_LEVEL_REG

_DEV2_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV3_INTERRUPT_LEVEL_REG

_DEV3_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV4_INTERRUPT_LEVEL_REG

_DEV4_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV5_INTERRUPT_LEVEL_REG

_DEV5_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV6_INTERRUPT_LEVEL_REG

_DEV6_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV7_INTERRUPT_LEVEL_REG

_DEV7_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV8_INTERRUPT_LEVEL_REG

_DEV8_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV9_INTERRUPT_LEVEL_REG

_DEV9_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV10_INTERRUPT_LEVEL_REG

_DEV10_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV11_INTERRUPT_LEVEL_REG

_DEV11_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV12_INTERRUPT_LEVEL_REG

_DEV12_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV13_INTERRUPT_LEVEL_REG

_DEV13_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV14_INTERRUPT_LEVEL_REG

_DEV14_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV15_INTERRUPT_LEVEL_REG

_DEV15_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV16_INTERRUPT_LEVEL_REG

_DEV16_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV17_INTERRUPT_LEVEL_REG

_DEV17_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        .global _DEV18_INTERRUPT_LEVEL_REG

_DEV18_INTERRUPT_LEVEL_REG:

        .word 0x00000000

        ; 128 bytes minus twenty-three registers (four bytes per register)

        .fill (128 - 23 * 4)

        ;.org 0xfffff200

        ; MorphoSys Decoder Registers

        .global _MS_DEC_CIRC_BUFF_SEL_REG

_MS_DEC_CIRC_BUFF_SEL_REG:

        .word 0x00000000

        .global _MS_DEC_SKIP_FACTOR_REG

_MS_DEC_SKIP_FACTOR_REG:

        .word 0x00000000

        .global _MS_DEC_CUSTOM_PERM_REG

_MS_DEC_CUSTOM_PERM_REG:

        .word 0x00000000

        .global _MS_DEC_CTXT_BASE_REG

_MS_DEC_CTXT_BASE_REG:

        .word 0x00000000

        .global _MS_DEC_LOOKUP_TBL_REG

_MS_DEC_LOOKUP_TBL_REG:

        .word 0x00000000

        .global _MS_CIRC_BUFF0_I_REG

_MS_CIRC_BUFF0_I_REG:

        .word (__FRAME_BUFFER_END)

        .global _MS_CIRC_BUFF0_P_REG

_MS_CIRC_BUFF0_P_REG:

        .word __FRAME_BUFFER_SIZE

        .global _MS_DATA_BUFF0_B_REG

_MS_DATA_BUFF0_B_REG:

        .word 0x00000000

        .global _MS_DATA_BUFF0_S_REG

_MS_DATA_BUFF0_S_REG:

        .word 0x00000000

        .global _MS_CIRC_BUFF1_I_REG

_MS_CIRC_BUFF1_I_REG:

        .word (__FRAME_BUFFER_END)

        .global _MS_CIRC_BUFF1_P_REG

_MS_CIRC_BUFF1_P_REG:

        .word __FRAME_BUFFER_SIZE

        .global _MS_DATA_BUFF1_B_REG

_MS_DATA_BUFF1_B_REG:

        .word 0x00000000

        .global _MS_DATA_BUFF1_S_REG

_MS_DATA_BUFF1_S_REG:

        .word 0x00000000

        .global _MS_CIRC_BUFF2_I_REG

_MS_CIRC_BUFF2_I_REG:

        .word (__FRAME_BUFFER_END)

        .global _MS_CIRC_BUFF2_P_REG

_MS_CIRC_BUFF2_P_REG:

        .word __FRAME_BUFFER_SIZE

        .global _MS_DATA_BUFF2_B_REG

_MS_DATA_BUFF2_B_REG:

        .word 0x00000000

        .global _MS_DATA_BUFF2_S_REG

_MS_DATA_BUFF2_S_REG:

        .word 0x00000000

        .global _MS_CIRC_BUFF3_I_REG

_MS_CIRC_BUFF3_I_REG:

        .word (__FRAME_BUFFER_END)

        .global _MS_CIRC_BUFF3_P_REG

_MS_CIRC_BUFF3_P_REG:

        .word __FRAME_BUFFER_SIZE

        .global _MS_DATA_BUFF3_B_REG

_MS_DATA_BUFF3_B_REG:

        .word 0x00000000

        .global _MS_DATA_BUFF3_S_REG

_MS_DATA_BUFF3_S_REG:

        .word 0x00000000

        .global _MS_CIRC_BUFF4_I_REG

_MS_CIRC_BUFF4_I_REG:

        .word (__FRAME_BUFFER_END)

        .global _MS_CIRC_BUFF4_P_REG

_MS_CIRC_BUFF4_P_REG:

        .word __FRAME_BUFFER_SIZE

        .global _MS_DATA_BUFF4_B_REG

_MS_DATA_BUFF4_B_REG:

        .word 0x00000000

        .global _MS_DATA_BUFF4_S_REG

_MS_DATA_BUFF4_S_REG:

        .word 0x00000000

        .global _MS_CIRC_BUFF5_I_REG

_MS_CIRC_BUFF5_I_REG:

        .word (__FRAME_BUFFER_END)

        .global _MS_CIRC_BUFF5_P_REG

_MS_CIRC_BUFF5_P_REG:

        .word __FRAME_BUFFER_SIZE

        .global _MS_DATA_BUFF5_B_REG

_MS_DATA_BUFF5_B_REG:

        .word 0x00000000

        .global _MS_DATA_BUFF5_S_REG

_MS_DATA_BUFF5_S_REG:

        .word 0x00000000

        .global _MS_CIRC_BUFF6_I_REG

_MS_CIRC_BUFF6_I_REG:

        .word (__FRAME_BUFFER_END)

        .global _MS_CIRC_BUFF6_P_REG

_MS_CIRC_BUFF6_P_REG:

        .word __FRAME_BUFFER_SIZE

        .global _MS_DATA_BUFF6_B_REG

_MS_DATA_BUFF6_B_REG:

        .word 0x00000000

        .global _MS_DATA_BUFF6_S_REG

_MS_DATA_BUFF6_S_REG:

        .word 0x00000000

        .global _MS_CIRC_BUFF7_I_REG

_MS_CIRC_BUFF7_I_REG:

        .word (__FRAME_BUFFER_END)

        .global _MS_CIRC_BUFF7_P_REG

_MS_CIRC_BUFF7_P_REG:

        .word __FRAME_BUFFER_SIZE

        .global _MS_DATA_BUFF7_B_REG

_MS_DATA_BUFF7_B_REG:

        .word 0x00000000

        .global _MS_DATA_BUFF7_S_REG

_MS_DATA_BUFF7_S_REG:

        .word 0x00000000

        .global _MS_OMEGA_PERM1_REG

_MS_OMEGA_PERM1_REG:

        .word 0x00000000

        .global _MS_WRITE_FB_ADDR_REG

_MS_WRITE_FB_ADDR_REG:

        .word 0x00000000

        .global _MS_OMEGA_PERM2_REG

_MS_OMEGA_PERM2_REG:

        .word 0x00000000

        ; 256 bytes minus forty registers (four bytes per register)

        .fill (256 - 40 * 4)

        ;.org 0xfffff300

        ; Debug Registers

        .global _DEBUG_HALT_REG

_DEBUG_HALT_REG:

        .word 0x00000000

        .global _DEBUG_BREAK_REG

_DEBUG_BREAK_REG:

        .word 0x00000000

        .global _DEBUG_CRITICAL_REG

_DEBUG_OWNERSHIP_REG:

        .word 0x00000000

        .global _DEBUG_KERNEL_ID_REG

_DEBUG_KERNEL_ID_REG:

        .word 0x00000000

        .global _DEBUG_IRQ_STATUS_REG

_DEBUG_IRQ_STATUS_REG:

        .word 0x00000000

        ; There are two reserved registers.

        .fill (2 * 4)

        .global _DEBUG_SW_SYSREQ_REG

_DEBUG_SW_SYSREQ_REG:

        .word 0x00000000

        ; 128 bytes minus eight registers (four bytes per register)

        .fill (128 - 8 * 4)

        .global _EXTENDED_GP0_REG

_EXTENDED_GP0_REG:

        .word 0x00000000

        .global _EXTENDED_GP1_REG

_EXTENDED_GP1_REG:

        .word 0x00000000

        .global _EXTENDED_GP2_REG

_EXTENDED_GP2_REG:

        .word 0x00000000

        .global _EXTENDED_GP3_REG

_EXTENDED_GP3_REG:

        .word 0x00000000

        .global _EXTENDED_GP4_REG

_EXTENDED_GP4_REG:

        .word 0x00000000

        .global _EXTENDED_GP5_REG

_EXTENDED_GP5_REG:

        .word 0x00000000

        .global _EXTENDED_GP6_REG

_EXTENDED_GP6_REG:

        .word 0x00000000

        .global _EXTENDED_GP7_REG

_EXTENDED_GP7_REG:

        .word 0x00000000

        .global _MEM_CTRL_EN_NC_MEM_REG

_MEM_CTRL_EN_NC_MEM_REG:

        .word 0x00000000

        .global _MEM_CTRL_BASE0_ADDR_REG

_MEM_CTRL_BASE0_ADDR_REG:

        .word 0x00000000

        .global _MEM_CTRL_MASK0_ADDR_REG

_MEM_CTRL_MASK0_ADDR_REG:

        .word 0x00000000

        .global _MEM_CTRL_BASE1_ADDR_REG

_MEM_CTRL_BASE1_ADDR_REG:

        .word 0x00000000

        .global _MEM_CTRL_MASK1_ADDR_REG

_MEM_CTRL_MASK1_ADDR_REG:

        .word 0x00000000

        .global _MEM_CTRL_BASE2_ADDR_REG

_MEM_CTRL_BASE2_ADDR_REG:

        .word 0x00000000

        .global _MEM_CTRL_MASK2_ADDR_REG

_MEM_CTRL_MASK2_ADDR_REG:

        .word 0x00000000

        .global _MEM_CTRL_BASE3_ADDR_REG

_MEM_CTRL_BASE3_ADDR_REG:

        .word 0x00000000

        .global _MEM_CTRL_MASK3_ADDR_REG

_MEM_CTRL_MASK3_ADDR_REG:

        .word 0x00000000

        ; 128 bytes minus seventeen registers (four bytes per register)

        .fill (128 - 17 * 4)

        ; Reserved memory-map space

        .fill (256 + 256)

        ;.org 0xfffff600

        ; Timer Registers

        .global _TIMER0_VAL_REG

_TIMER0_VAL_REG:

        .word 0x00000000

        .global _TIMER1_VAL_REG

_TIMER1_VAL_REG:

        .word 0x00000000

        .global _TIMER2_VAL_REG

_TIMER2_VAL_REG:

        .word 0x00000000

        .global _TIMER3_VAL_REG

_TIMER3_VAL_REG:

        .word 0x00000000

        ; 256 bytes minus four registers (four bytes per register)

        .fill (256 - 4 * 4)

        ;.org 0xfffff700

        ; Output Line Control Registers

        .global _OUTPUT0_CTRL

_OUTPUT0_CTRL:

        .word 0x00000000

        .global _OUTPUT1_CTRL

_OUTPUT1_CTRL:

        .word 0x00000000

        .global _OUTPUT2_CTRL

_OUTPUT2_CTRL:

        .word 0x00000000

        .global _OUTPUT3_CTRL

_OUTPUT3_CTRL:

        .word 0x00000000

        .global _OUTPUT4_CTRL

_OUTPUT4_CTRL:

        .word 0x00000000

        .global _OUTPUT5_CTRL

_OUTPUT5_CTRL:

        .word 0x00000000

        .global _OUTPUT6_CTRL

_OUTPUT6_CTRL:

        .word 0x00000000

        ; 128 bytes minus seven registers (four bytes per register)

        .fill (128 - 7 * 4)

        .global _INPUT0_CTRL

_INPUT0_CTRL:

        .word 0x00000000

        ; 128 bytes minus one register (four bytes per register)

        .fill (128 - 1 * 4)

        ;.org 0xfffff800

        ; IQ Buffer Registers

        .global _IQ_BUFF_CTRL_REG

_IQ_BUFF_CTRL_REG:

        .word 0x00000000

        .global _IQ_BUFF_STATUS_REG

_IQ_BUFF_STATUS_REG:

        .word 0x00000000

        .global _IQ_BUFF_PARAMETER1_REG

_IQ_BUFF_PARAMETER1_REG:

        .word 0x00000000

        .global _IQ_BUFF_TRANSFER_SIZE1_REG

_IQ_BUFF_TRANSFER_SIZE1_REG:

        .word 0x00000000

        .global _IQ_BUFF_FB_BASE1_REG

_IQ_BUFF_FB_BASE1_REG:

        .word 0x00000000

        .global _IQ_BUFF_FB_SIZE1_REG

_IQ_BUFF_FB_SIZE1_REG:

        .word 0x00000000

        .global _IQ_BUFF_PARAMETER2_REG

_IQ_BUFF_PARAMETER2_REG:

        .word 0x00000000

        .global _IQ_BUFF_TRANSFER_SIZE2_REG

_IQ_BUFF_TRANSFER_SIZE2_REG:

        .word 0x00000000

        .global _IQ_BUFF_FB_BASE2_REG

_IQ_BUFF_FB_BASE2_REG:

        .word 0x00000000

        .global _IQ_BUFF_FB_SIZE2_REG

_IQ_BUFF_FB_SIZE2_REG:

        .word 0x00000000

        ; 256 bytes minus ten registers (four bytes per register)

        .fill (256 - 10 * 4)

        ;.org 0xfffff900

        ; DMA Controller

        .global _DMA_CTRL_REG

_DMA_CTRL_REG:

        .word 0x00000000

        .global _DMA_STATUS_REG

_DMA_STATUS_REG:

        .word 0x00000000

        .global _DMA_CH0_EADDR_REG

_DMA_CH0_EADDR_REG:

        .word 0x00000000

        .global _DMA_CH0_IADDR_REG

_DMA_CH0_IADDR_REG:

        .word 0x00000000

        .global _DMA_CH0_SIZE_REG

_DMA_CH0_SIZE_REG:

        .word 0x00000000

        .global _DMA_CH1_EADDR_REG

_DMA_CH1_EADDR_REG:

        .word 0x00000000

        .global _DMA_CH1_IADDR_REG

_DMA_CH1_IADDR_REG:

        .word 0x00000000

        .global _DMA_CH1_SIZE_REG

_DMA_CH1_SIZE_REG:

        .word 0x00000000

        .global _DMA_CH2_EADDR_REG

_DMA_CH2_EADDR_REG:

        .word 0x00000000

        .global _DMA_CH2_IADDR_REG

_DMA_CH2_IADDR_REG:

        .word 0x00000000

        .global _DMA_CH2_SIZE_REG

_DMA_CH2_SIZE_REG:

        .word 0x00000000

        .global _DMA_CH3_EADDR_REG

_DMA_CH3_EADDR_REG:

        .word 0x00000000

        .global _DMA_CH3_IADDR_REG

_DMA_CH3_IADDR_REG:

        .word 0x00000000

        .global _DMA_CH3_SIZE_REG

_DMA_CH3_SIZE_REG:

        .word 0x00000000

        ; 256 bytes minus fourteen registers (four bytes per register)

        .fill (256 - 14 * 4)

        ;.org 0xfffffa00

        ; Sequence Generator

        .global _SEQ_GEN_CTRL_STATUS_REG

_SEQ_GEN_CTRL_STATUS_REG:

        .word 0x00000000

        .global _SEQ_GEN_MASK_REGS

_SEQ_GEN_MASK_REGS:

        .fill (302 * 4)

        .global _SEQ_GEN_SHIFT_REG

_SEQ_GEN_SHIFT_REG:

        .word 0x00000000

        ; 256 bytes minus seven registers (four bytes per register)

        .fill (256 - 48 * 4)

        ; Reserved memory-map space

        .fill (0x1000 - 0xf00)