URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [newlib-1.17.0/] [libgloss/] [pa/] [crt0.S] - Blame information for rev 868

Go to most recent revision | Details | Compare with Previous | View Log


/* crt0.S -- startup file for hppa.
 *
 * Copyright (c) 1995 Cygnus Support
 *
 * The authors hereby grant permission to use, copy, modify, distribute,
 * and license this software and its documentation for any purpose, provided
 * that existing copyright notices are retained in all copies and that this
 * notice is included verbatim in any distributions. No written agreement,
 * license, or royalty fee is required for any of the authorized uses.
 * Modifications to this software may be copyrighted by their authors
 * and need not follow the licensing terms described here, provided that
 * the new terms are clearly indicated on the first page of each file where
 * they apply.
 */
        .VERSION "1.0"
        .COPYRIGHT "crt0.o for the PA"
 
        .DATA
 
/*
 * Set up the standard spaces (sections) These definitions come
 * from /lib/pcc_prefix.s.
 */
        .TEXT
 
/*
 * stuff we need that's defined elsewhere.
 */
        .IMPORT main, CODE
        .IMPORT exit, CODE
        .IMPORT _bss_start, DATA
        .IMPORT _end, DATA
        .IMPORT environ, DATA
 
/*
 * start -- set things up so the application will run.
 *
 */
        .PROC
        .CALLINFO SAVE_SP, FRAME=48
        .EXPORT $START$,ENTRY
$START$
 
        /* FIXME: this writes to page zero */
        ;; setup the %30 (stack pointer) with some memory
        ldil    L%_stack,%r30
        ldo     R%_stack(%r30),%r30
 
        ;; we need to set %r27 (global data pointer) here too
        ldil    L%$global$,%r27
        ldo     R%$global$(%r27),%r27           ; same problem as above
 
/*
 * zerobss -- zero out the bss section
 */
        ; load the start of bss
        ldil    L%_bss_start,%r4
        ldo     R%_bss_start(%r4),%r4
 
        ;  load the end of bss
        ldil    L%_end,%r5
        ldo     R%_end(%r5),%r5
 
 
L$bssloop
        addi    -1,%r5,%r5                      ; decrement _bss_end
        stb     %r0,0(0,%r5)                    ; we do this by bytes for now even
                                                ; though it's slower, it's safer
        combf,= %r4,%r5, L$bssloop
        nop
 
        ldi     1,%ret0
 
/*
 * Call the main routine from the application to get it going.
 * main (argc, argv, environ)
 * We pass argv as a pointer to NULL.
 */
 
        ldil    L%main,%r22
        ble     R%main(%sr4,%r22)
        copy    %r31,%r2
/*
 * Call exit() from the C library with the return value from main()
 */
        copy    %r28,%r26
        ldil    L%exit,%r22
        ble     R%exit(%sr4,%r22)
        copy    %r31,%r2
 
        .PROCEND
/*
 * _exit -- Exit from the application. Normally we cause a user trap
 *          to return to the ROM monitor for another run.
 */
        .EXPORT _exit, ENTRY
_exit
        .PROC
        .CALLINFO
        .ENTRY
 
        ;; This just causes a breakpoint exception
        break   0x0,0x0
        bv,n    (%rp)
        nop
        .EXIT
        .PROCEND
 
/*
 * _sr4export -- support for called functions. (mostly for GDB)
 */
        .EXPORT _sr4export, ENTRY
_sr4export:
        .PROC
        .CALLINFO
        .ENTRY
 
        ble     0(%sr4,%r22)
        copy    %r31,%rp
        ldw     -24(%sr0,%sp),%rp
        ldsid   (%sr0,%rp),%r1
        mtsp    %r1,%sr0
        be,n    0(%sr0,%rp)
        nop
        .EXIT
        .PROCEND
 
 

Line No.	Rev	Author	Line
1	148	jeremybenn	`/* crt0.S -- startup file for hppa.`
2			`*`
3			`* Copyright (c) 1995 Cygnus Support`
4			`*`
5			`* The authors hereby grant permission to use, copy, modify, distribute,`
6			`* and license this software and its documentation for any purpose, provided`
7			`* that existing copyright notices are retained in all copies and that this`
8			`* notice is included verbatim in any distributions. No written agreement,`
9			`* license, or royalty fee is required for any of the authorized uses.`
10			`* Modifications to this software may be copyrighted by their authors`
11			`* and need not follow the licensing terms described here, provided that`
12			`* the new terms are clearly indicated on the first page of each file where`
13			`* they apply.`
14			`*/`
15			`.VERSION "1.0"`
16			`.COPYRIGHT "crt0.o for the PA"`
17
18			`.DATA`
19
20			`/*`
21			`* Set up the standard spaces (sections) These definitions come`
22			`* from /lib/pcc_prefix.s.`
23			`*/`
24			`.TEXT`
25
26			`/*`
27			`* stuff we need that's defined elsewhere.`
28			`*/`
29			`.IMPORT main, CODE`
30			`.IMPORT exit, CODE`
31			`.IMPORT _bss_start, DATA`
32			`.IMPORT _end, DATA`
33			`.IMPORT environ, DATA`
34
35			`/*`
36			`* start -- set things up so the application will run.`
37			`*`
38			`*/`
39			`.PROC`
40			`.CALLINFO SAVE_SP, FRAME=48`
41			`.EXPORT $START$,ENTRY`
42			$START$
43
44			`/* FIXME: this writes to page zero */`
45			`;; setup the %30 (stack pointer) with some memory`
46			`ldil L%_stack,%r30`
47			`ldo R%_stack(%r30),%r30`
48
49			`;; we need to set %r27 (global data pointer) here too`
50			`ldil L%$global$,%r27`
51			`ldo R%$global$(%r27),%r27 ; same problem as above`
52
53			`/*`
54			`* zerobss -- zero out the bss section`
55			`*/`
56			`; load the start of bss`
57			`ldil L%_bss_start,%r4`
58			`ldo R%_bss_start(%r4),%r4`
59
60			`; load the end of bss`
61			`ldil L%_end,%r5`
62			`ldo R%_end(%r5),%r5`
63
64
65			`L$bssloop`
66			`addi -1,%r5,%r5 ; decrement _bss_end`
67			`stb %r0,0(0,%r5) ; we do this by bytes for now even`
68			`; though it's slower, it's safer`
69			`combf,= %r4,%r5, L$bssloop`
70			`nop`
71
72			`ldi 1,%ret0`
73
74			`/*`
75			`* Call the main routine from the application to get it going.`
76			`* main (argc, argv, environ)`
77			`* We pass argv as a pointer to NULL.`
78			`*/`
79
80			`ldil L%main,%r22`
81			`ble R%main(%sr4,%r22)`
82			`copy %r31,%r2`
83			`/*`
84			`* Call exit() from the C library with the return value from main()`
85			`*/`
86			`copy %r28,%r26`
87			`ldil L%exit,%r22`
88			`ble R%exit(%sr4,%r22)`
89			`copy %r31,%r2`
90
91			`.PROCEND`
92			`/*`
93			`* _exit -- Exit from the application. Normally we cause a user trap`
94			`* to return to the ROM monitor for another run.`
95			`*/`
96			`.EXPORT _exit, ENTRY`
97			`_exit`
98			`.PROC`
99			`.CALLINFO`
100			`.ENTRY`
101
102			`;; This just causes a breakpoint exception`
103			`break 0x0,0x0`
104			`bv,n (%rp)`
105			`nop`
106			`.EXIT`
107			`.PROCEND`
108
109			`/*`
110			`* _sr4export -- support for called functions. (mostly for GDB)`
111			`*/`
112			`.EXPORT _sr4export, ENTRY`
113			`_sr4export:`
114			`.PROC`
115			`.CALLINFO`
116			`.ENTRY`
117
118			`ble 0(%sr4,%r22)`
119			`copy %r31,%rp`
120			`ldw -24(%sr0,%sp),%rp`
121			`ldsid (%sr0,%rp),%r1`
122			`mtsp %r1,%sr0`
123			`be,n 0(%sr0,%rp)`
124			`nop`
125			`.EXIT`
126			`.PROCEND`
127
128

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [newlib-1.17.0/] [libgloss/] [pa/] [crt0.S] - Blame information for rev 868