URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [newlib-1.17.0/] [newlib/] [libc/] [sys/] [arm/] [crt0.S] - Blame information for rev 855

Go to most recent revision | Details | Compare with Previous | View Log


#include "newlib.h"
#include "swi.h"
 
/* ANSI concatenation macros.  */
#define CONCAT(a, b) CONCAT2(a, b)
#define CONCAT2(a, b) a ## b
 
#ifdef __USER_LABEL_PREFIX__
#define FUNCTION( name ) CONCAT (__USER_LABEL_PREFIX__, name)
#else
#error __USER_LABEL_PREFIX is not defined
#endif
 
#ifdef HAVE_INITFINI_ARRAY
#define _init   __libc_init_array
#define _fini   __libc_fini_array
#endif
 
/* .text is used instead of .section .text so it works with arm-aout too.  */
        .text
#if defined(__thumb2__)
        .syntax unified
        .thumb
.macro FUNC_START name
        .global \name
        .thumb_func
\name:
.endm
#else
        .code 32
.macro FUNC_START name
        .global \name
\name:
.endm
#endif
        .align  0
 
        FUNC_START      _mainCRTStartup
        FUNC_START      _start
        FUNC_START      start
#if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__)
        /* Annotation for EABI unwinding tables.  */
        .fnstart
#endif
 
/* Start by setting up a stack */
#ifdef ARM_RDP_MONITOR
        /*  Issue Demon SWI to read stack info */
        swi     SWI_GetEnv      /*  Returns command line in r0 */
        mov     sp,r1           /*  and the highest memory address in r1 */
        ldr     sl, .LC2        /*  stack limit is at end of data */
        add     sl, sl, #256    /*  allow slop for stack overflow handling */
                                /*  and small frames */
#else
#ifdef ARM_RDI_MONITOR
        /*  Issue Angel SWI to read stack info */
        mov     r0, #AngelSWI_Reason_HeapInfo
        adr     r1, .LC0        /*  point at ptr to 4 words to receive data */
#if defined(__thumb2__)
        bkpt    AngelSWI
#else
        /*  We are always in ARM mode for startup */
        AngelSWIAsm     AngelSWI_ARM
#endif
        ldr     r0, .LC0        /*  point at values read */
        ldr     sp, [r0, #8]
        ldr     sl, [r0, #12]
        add     sl, sl, #256    /*  allow slop for stack overflow handling */
                                /*  and small frames */
#else
        /*  Set up the stack pointer to a fixed value */
        ldr     r3, .LC0
        mov     sp, r3
        /* Setup a default stack-limit in-case the code has been
           compiled with "-mapcs-stack-check".  Hard-wiring this value
           is not ideal, since there is currently no support for
           checking that the heap and stack have not collided, or that
           this default 64k is enough for the program being executed.
           However, it ensures that this simple crt0 world will not
           immediately cause an overflow event:  */
        sub     sl, sp, #64 << 10       /* Still assumes 256bytes below sl */
#endif
#endif
        /* Zero the memory in the .bss section.  */
        mov     a2, #0                  /* Second arg: fill value */
        mov     fp, a2                  /* Null frame pointer */
        mov     r7, a2                  /* Null frame pointer for Thumb */
 
        ldr     a1, .LC1                /* First arg: start of memory block */
        ldr     a3, .LC2
        sub     a3, a3, a1              /* Third arg: length of block */
 
 
#if defined(__thumb__) && !defined(__thumb2__)
        /* Enter Thumb mode.... */
        add     a4, pc, #1      /* Get the address of the Thumb block */
        bx      a4              /* Go there and start Thumb decoding  */
 
        .code 16
        .global __change_mode
        .thumb_func
__change_mode:
#endif
 
        bl      FUNCTION (memset)
#if !defined (ARM_RDP_MONITOR) && !defined (ARM_RDI_MONITOR)
        mov     r0, #0          /*  no arguments  */
        mov     r1, #0          /*  no argv either */
#else
        /* Need to set up standard file handles */
        bl      FUNCTION (initialise_monitor_handles)
 
#ifdef ARM_RDP_MONITOR
        swi     SWI_GetEnv      /*  sets r0 to point to the command line */
        mov     r1, r0
#else
        mov     r0, #AngelSWI_Reason_GetCmdLine
        adr     r1, .LC30       /*  Space for command line */
        AngelSWIAsm     AngelSWI
        ldr     r1, .LC30
#endif
        /*  Parse string at r1 */
        mov     r0, #0          /*  count of arguments so far */
        /* Push a NULL argument onto the end of the list.  */
#ifdef __thumb__
        push    {r0}
#else
        stmfd   sp!, {r0}
#endif
.LC10:
/*  Skip leading blanks */
#ifdef __thumb__
        ldrb    r3, [r1]
        add     r1, #1
#else
        ldrb    r3, [r1], #1
#endif
        cmp     r3, #0
        beq     .LC12
        cmp     r3, #' '
        beq     .LC10
 
/*  See whether we are scanning a string */
        cmp     r3, #'"'
#ifdef __thumb__
        beq     .LC20
        cmp     r3, #'\''
        bne     .LC21
.LC20:
        mov     r2, r3
        b       .LC22
 
.LC21:
        mov     r2, #' '        /*  terminator type */
        sub     r1, r1, #1      /*  adjust back to point at start char */
.LC22:
#else
        cmpne   r3, #'\''
        moveq   r2, r3
        movne   r2, #' '        /*  terminator type */
        subne   r1, r1, #1      /*  adjust back to point at start char */
#endif
 
/*  Stack a pointer to the current argument */
#ifdef __thumb__
        push    {r1}
#else
        stmfd   sp!, {r1}
#endif
        add     r0, r0, #1
.LC11:
#ifdef __thumb__
        ldrb    r3, [r1]
        add     r1, #1
#else
        ldrb    r3, [r1], #1
#endif
        cmp     r3, #0
        beq     .LC12
        cmp     r2, r3          /*  reached terminator? */
        bne     .LC11
        mov     r2, #0
        sub     r3, r1, #1
        strb    r2, [r3]        /*  terminate the arg string */
        b       .LC10
 
.LC12:
        mov     r1, sp          /*  point at stacked arg pointers */
        /* We've now got the stacked args in order reverse the */
#ifdef __thumb__
        mov     r2, r0
        lsl     r2, #2
        add     r2, sp
        mov     r3, sp
.LC15:  cmp     r2, r3
        bls     .LC14
        sub     r2, #4
        ldr     r4, [r2]
        ldr     r5, [r3]
        str     r5, [r2]
        str     r4, [r3]
        add     r3, #4
        b       .LC15
.LC14:
        /* Ensure doubleword stack alignment.  */
        mov     r4, sp
        mov     r5, #7
        bic     r4, r5
        mov     sp, r4
#else
        add     r2, sp, r0, LSL #2      /* End of args */
        mov     r3, sp                  /* Start of args */
.LC13:  cmp     r2, r3
        ldrhi   r4,[r2, #-4]            /* Reverse ends of list */
        ldrhi   r5, [r3]
        strhi   r5, [r2, #-4]!
        strhi   r4, [r3], #4
        bhi     .LC13
        /* Ensure doubleword stack alignment.  */
        bic     sp, sp, #7
#endif
#endif
 
#ifdef __USES_INITFINI__
        /* Some arm/elf targets use the .init and .fini sections
           to create constructors and destructors, and for these
           targets we need to call the _init function and arrange
           for _fini to be called at program exit.  */
        mov     r4, r0
        mov     r5, r1
        ldr     r0, .Lfini
        bl      FUNCTION (atexit)
        bl      FUNCTION (_init)
        mov     r0, r4
        mov     r1, r5
#endif
        bl      FUNCTION (main)
 
        bl      FUNCTION (exit)         /* Should not return.  */
 
#if defined(__thumb__) && !defined(__thumb2__)
        /* Come out of Thumb mode.  This code should be redundant.  */
 
        mov     a4, pc
        bx      a4
 
        .code 32
        .global change_back
change_back:
        /* Halt the execution.  This code should never be executed.  */
        /* With no debug monitor, this probably aborts (eventually).
           With a Demon debug monitor, this halts cleanly.
           With an Angel debug monitor, this will report 'Unknown SWI'.  */
        swi     SWI_Exit
#endif
 
        /* For Thumb, constants must be after the code since only
           positive offsets are supported for PC relative addresses.  */
 
        .align 0
.LC0:
#ifdef ARM_RDI_MONITOR
        .word   HeapBase
#else
#ifndef ARM_RDP_MONITOR
#ifdef __pe__
        .word   0x800000
#else
/*      .word   0x80000 */              /* Top of RAM on the PIE board.  */
#endif
#endif
#endif
#if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__)
        /* Protect against unhandled exceptions.  */
        .cantunwind
        .fnend
#endif
.LC1:
        .word   __bss_start__
.LC2:
        .word   __bss_end__
#ifdef __USES_INITFINI__
.Lfini:
        .word   FUNCTION(_fini)
#endif
#ifdef ARM_RDI_MONITOR
.LC30:
        .word   CommandLine
        .word   255
 
/*  Workspace for Angel calls.  */
        .data
/*  Data returned by monitor SWI.  */
.global __stack_base__
HeapBase:       .word   0
HeapLimit:      .word   0
__stack_base__: .word   0
StackLimit:     .word   0
CommandLine:    .space  256,0   /*  Maximum length of 255 chars handled.  */
#endif
 
#ifdef __pe__
        .section .idata$3
        .long   0,0,0,0,0,0,0,0
#endif

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [newlib-1.17.0/] [newlib/] [libc/] [sys/] [arm/] [crt0.S] - Blame information for rev 855

Line No.	Rev	Author	Line
1	148	jeremybenn	`#include "newlib.h"`
2			`#include "swi.h"`
3
4			`/* ANSI concatenation macros. */`
5			`#define CONCAT(a, b) CONCAT2(a, b)`
6			`#define CONCAT2(a, b) a ## b`
7
8			`#ifdef __USER_LABEL_PREFIX__`
9			`#define FUNCTION( name ) CONCAT (__USER_LABEL_PREFIX__, name)`
10			`#else`
11			`#error __USER_LABEL_PREFIX is not defined`
12			`#endif`
13
14			`#ifdef HAVE_INITFINI_ARRAY`
15			`#define _init __libc_init_array`
16			`#define _fini __libc_fini_array`
17			`#endif`
18
19			`/* .text is used instead of .section .text so it works with arm-aout too. */`
20			`.text`
21			`#if defined(__thumb2__)`
22			`.syntax unified`
23			`.thumb`
24			`.macro FUNC_START name`
25			`.global \name`
26			`.thumb_func`
27			`\name:`
28			`.endm`
29			`#else`
30			`.code 32`
31			`.macro FUNC_START name`
32			`.global \name`
33			`\name:`
34			`.endm`
35			`#endif`
36			`.align 0`
37
38			`FUNC_START _mainCRTStartup`
39			`FUNC_START _start`
40			`FUNC_START start`
41			`#if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__)`
42			`/* Annotation for EABI unwinding tables. */`
43			`.fnstart`
44			`#endif`
45
46			`/* Start by setting up a stack */`
47			`#ifdef ARM_RDP_MONITOR`
48			`/* Issue Demon SWI to read stack info */`
49			`swi SWI_GetEnv /* Returns command line in r0 */`
50			`mov sp,r1 /* and the highest memory address in r1 */`
51			`ldr sl, .LC2 /* stack limit is at end of data */`
52			`add sl, sl, #256 /* allow slop for stack overflow handling */`
53			`/* and small frames */`
54			`#else`
55			`#ifdef ARM_RDI_MONITOR`
56			`/* Issue Angel SWI to read stack info */`
57			`mov r0, #AngelSWI_Reason_HeapInfo`
58			`adr r1, .LC0 /* point at ptr to 4 words to receive data */`
59			`#if defined(__thumb2__)`
60			`bkpt AngelSWI`
61			`#else`
62			`/* We are always in ARM mode for startup */`
63			`AngelSWIAsm AngelSWI_ARM`
64			`#endif`
65			`ldr r0, .LC0 /* point at values read */`
66			`ldr sp, [r0, #8]`
67			`ldr sl, [r0, #12]`
68			`add sl, sl, #256 /* allow slop for stack overflow handling */`
69			`/* and small frames */`
70			`#else`
71			`/* Set up the stack pointer to a fixed value */`
72			`ldr r3, .LC0`
73			`mov sp, r3`
74			`/* Setup a default stack-limit in-case the code has been`
75			`compiled with "-mapcs-stack-check". Hard-wiring this value`
76			`is not ideal, since there is currently no support for`
77			`checking that the heap and stack have not collided, or that`
78			`this default 64k is enough for the program being executed.`
79			`However, it ensures that this simple crt0 world will not`
80			`immediately cause an overflow event: */`
81			`sub sl, sp, #64 << 10 /* Still assumes 256bytes below sl */`
82			`#endif`
83			`#endif`
84			`/* Zero the memory in the .bss section. */`
85			`mov a2, #0 /* Second arg: fill value */`
86			`mov fp, a2 /* Null frame pointer */`
87			`mov r7, a2 /* Null frame pointer for Thumb */`
88
89			`ldr a1, .LC1 /* First arg: start of memory block */`
90			`ldr a3, .LC2`
91			`sub a3, a3, a1 /* Third arg: length of block */`
92
93
94			`#if defined(__thumb__) && !defined(__thumb2__)`
95			`/* Enter Thumb mode.... */`
96			`add a4, pc, #1 /* Get the address of the Thumb block */`
97			`bx a4 /* Go there and start Thumb decoding */`
98
99			`.code 16`
100			`.global __change_mode`
101			`.thumb_func`
102			`__change_mode:`
103			`#endif`
104
105			`bl FUNCTION (memset)`
106			`#if !defined (ARM_RDP_MONITOR) && !defined (ARM_RDI_MONITOR)`
107			`mov r0, #0 /* no arguments */`
108			`mov r1, #0 /* no argv either */`
109			`#else`
110			`/* Need to set up standard file handles */`
111			`bl FUNCTION (initialise_monitor_handles)`
112
113			`#ifdef ARM_RDP_MONITOR`
114			`swi SWI_GetEnv /* sets r0 to point to the command line */`
115			`mov r1, r0`
116			`#else`
117			`mov r0, #AngelSWI_Reason_GetCmdLine`
118			`adr r1, .LC30 /* Space for command line */`
119			`AngelSWIAsm AngelSWI`
120			`ldr r1, .LC30`
121			`#endif`
122			`/* Parse string at r1 */`
123			`mov r0, #0 /* count of arguments so far */`
124			`/* Push a NULL argument onto the end of the list. */`
125			`#ifdef __thumb__`
126			`push {r0}`
127			`#else`
128			`stmfd sp!, {r0}`
129			`#endif`
130			`.LC10:`
131			`/* Skip leading blanks */`
132			`#ifdef __thumb__`
133			`ldrb r3, [r1]`
134			`add r1, #1`
135			`#else`
136			`ldrb r3, [r1], #1`
137			`#endif`
138			`cmp r3, #0`
139			`beq .LC12`
140			`cmp r3, #' '`
141			`beq .LC10`
142
143			`/* See whether we are scanning a string */`
144			`cmp r3, #'"'`
145			`#ifdef __thumb__`
146			`beq .LC20`
147			`cmp r3, #'\''`
148			`bne .LC21`
149			`.LC20:`
150			`mov r2, r3`
151			`b .LC22`
152
153			`.LC21:`
154			`mov r2, #' ' /* terminator type */`
155			`sub r1, r1, #1 /* adjust back to point at start char */`
156			`.LC22:`
157			`#else`
158			`cmpne r3, #'\''`
159			`moveq r2, r3`
160			`movne r2, #' ' /* terminator type */`
161			`subne r1, r1, #1 /* adjust back to point at start char */`
162			`#endif`
163
164			`/* Stack a pointer to the current argument */`
165			`#ifdef __thumb__`
166			`push {r1}`
167			`#else`
168			`stmfd sp!, {r1}`
169			`#endif`
170			`add r0, r0, #1`
171			`.LC11:`
172			`#ifdef __thumb__`
173			`ldrb r3, [r1]`
174			`add r1, #1`
175			`#else`
176			`ldrb r3, [r1], #1`
177			`#endif`
178			`cmp r3, #0`
179			`beq .LC12`
180			`cmp r2, r3 /* reached terminator? */`
181			`bne .LC11`
182			`mov r2, #0`
183			`sub r3, r1, #1`
184			`strb r2, [r3] /* terminate the arg string */`
185			`b .LC10`
186
187			`.LC12:`
188			`mov r1, sp /* point at stacked arg pointers */`
189			`/* We've now got the stacked args in order reverse the */`
190			`#ifdef __thumb__`
191			`mov r2, r0`
192			`lsl r2, #2`
193			`add r2, sp`
194			`mov r3, sp`
195			`.LC15: cmp r2, r3`
196			`bls .LC14`
197			`sub r2, #4`
198			`ldr r4, [r2]`
199			`ldr r5, [r3]`
200			`str r5, [r2]`
201			`str r4, [r3]`
202			`add r3, #4`
203			`b .LC15`
204			`.LC14:`
205			`/* Ensure doubleword stack alignment. */`
206			`mov r4, sp`
207			`mov r5, #7`
208			`bic r4, r5`
209			`mov sp, r4`
210			`#else`
211			`add r2, sp, r0, LSL #2 /* End of args */`
212			`mov r3, sp /* Start of args */`
213			`.LC13: cmp r2, r3`
214			`ldrhi r4,[r2, #-4] /* Reverse ends of list */`
215			`ldrhi r5, [r3]`
216			`strhi r5, [r2, #-4]!`
217			`strhi r4, [r3], #4`
218			`bhi .LC13`
219			`/* Ensure doubleword stack alignment. */`
220			`bic sp, sp, #7`
221			`#endif`
222			`#endif`
223
224			`#ifdef __USES_INITFINI__`
225			`/* Some arm/elf targets use the .init and .fini sections`
226			`to create constructors and destructors, and for these`
227			`targets we need to call the _init function and arrange`
228			`for _fini to be called at program exit. */`
229			`mov r4, r0`
230			`mov r5, r1`
231			`ldr r0, .Lfini`
232			`bl FUNCTION (atexit)`
233			`bl FUNCTION (_init)`
234			`mov r0, r4`
235			`mov r1, r5`
236			`#endif`
237			`bl FUNCTION (main)`
238
239			`bl FUNCTION (exit) /* Should not return. */`
240
241			`#if defined(__thumb__) && !defined(__thumb2__)`
242			`/* Come out of Thumb mode. This code should be redundant. */`
243
244			`mov a4, pc`
245			`bx a4`
246
247			`.code 32`
248			`.global change_back`
249			`change_back:`
250			`/* Halt the execution. This code should never be executed. */`
251			`/* With no debug monitor, this probably aborts (eventually).`
252			`With a Demon debug monitor, this halts cleanly.`
253			`With an Angel debug monitor, this will report 'Unknown SWI'. */`
254			`swi SWI_Exit`
255			`#endif`
256
257			`/* For Thumb, constants must be after the code since only`
258			`positive offsets are supported for PC relative addresses. */`
259
260			`.align 0`
261			`.LC0:`
262			`#ifdef ARM_RDI_MONITOR`
263			`.word HeapBase`
264			`#else`
265			`#ifndef ARM_RDP_MONITOR`
266			`#ifdef __pe__`
267			`.word 0x800000`
268			`#else`
269			`/* .word 0x80000 / / Top of RAM on the PIE board. */`
270			`#endif`
271			`#endif`
272			`#endif`
273			`#if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__)`
274			`/* Protect against unhandled exceptions. */`
275			`.cantunwind`
276			`.fnend`
277			`#endif`
278			`.LC1:`
279			`.word __bss_start__`
280			`.LC2:`
281			`.word __bss_end__`
282			`#ifdef __USES_INITFINI__`
283			`.Lfini:`
284			`.word FUNCTION(_fini)`
285			`#endif`
286			`#ifdef ARM_RDI_MONITOR`
287			`.LC30:`
288			`.word CommandLine`
289			`.word 255`
290
291			`/* Workspace for Angel calls. */`
292			`.data`
293			`/* Data returned by monitor SWI. */`
294			`.global __stack_base__`
295			`HeapBase: .word 0`
296			`HeapLimit: .word 0`
297			`__stack_base__: .word 0`
298			`StackLimit: .word 0`
299			`CommandLine: .space 256,0 /* Maximum length of 255 chars handled. */`
300			`#endif`
301
302			`#ifdef __pe__`
303			`.section .idata$3`
304			`.long 0,0,0,0,0,0,0,0`
305			`#endif`