OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [binutils-2.18.50/] [bfd/] [mep-relocs.pl] - Blame information for rev 156

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 38 julius
#!/usr/bin/perl
2
# -*- perl -*-
3
#
4
# Toshiba MeP Media Engine Relocation Generator
5
# Copyright (C) 2001, 2007 Free Software Foundation, Inc.
6
# This file is part of BFD.
7
# Originally written by DJ Delorie <dj@redhat.com>
8
#
9
# This program is free software; you can redistribute it and/or modify
10
# it under the terms of the GNU General Public License as published by
11
# the Free Software Foundation; either version 3 of the License, or
12
# (at your option) any later version.
13
# 
14
# This program is distributed in the hope that it will be useful,
15
# but WITHOUT ANY WARRANTY; without even the implied warranty of
16
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17
# GNU General Public License for more details.
18
# 
19
# You should have received a copy of the GNU General Public License
20
# along with this program; if not, write to the Free Software
21
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
22
# MA 02110-1301, USA.
23
 
24
 
25
# Usage: Run this anywhere inside your source tree.  It will read
26
# include/elf/mep.h and scan the comments therein.  It will renumber
27
# the relocs to be sequential (this is needed so that bfd/elf32-mep.h
28
# works) if needed.  It will then update the reloc list in bfd/reloc.c
29
# and the howto, mapping, and apply routines in bfd/elf32-mep.c.  You
30
# can then regenerate bfd-in2.h and check everything in.
31
 
32
# FIXME: After the relocation list is finalized, change this to
33
# *verify* the reloc list, rather than resequence it.
34
 
35
while (! -f "include/elf/mep.h" && ! -f "bfd/reloc.c") {
36
    chdir "..";
37
    $pwd = `pwd`;
38
    if ($pwd !~ m@/.*/@) {
39
        print STDERR "Cannot find include/elf/mep.h or bfd/reloc.h\n";
40
        exit 1;
41
    }
42
}
43
$pwd = `pwd`;
44
print "srctop is $pwd";
45
 
46
printf "Reading include/elf/mep.h ...\n";
47
open(MEPH, "include/elf/mep.h");
48
open(MEPHO, "> include/elf/mep.h.new") || die("mep.h.new create: $!");
49
$val = 0;
50
while (<MEPH>) {
51
    if (($pre,$rel,$rest) = /(.*RELOC_NUMBER \()([^,]+), *\d+(.*)/) {
52
        $rest =~ s/[\r\n]+$//;
53
        print (MEPHO "$pre$rel, $val$rest\n") || die("mep.h.new write: $!");
54
        $val ++;
55
        $rel =~ s/R_MEP_//;
56
        push(@relocs, $rel);
57
 
58
        $rest =~ s@.*/\* @@;
59
        ($pattern, $sign, $attrs) = $rest =~ m@(.*) ([US]) (.*)\*/@;
60
        $pattern =~ s/ //g;
61
        push(@pattern, $pattern);
62
        push(@sign, $sign);
63
        push(@attrs, $attrs);
64
 
65
        printf "%4d $rel p=`$pattern' s=`$sign' a=`$attrs'\n", $#pattern;
66
 
67
    } else {
68
        print(MEPHO) || die("mep.h.new write: $!");
69
    }
70
}
71
close(MEPH);
72
close(MEPHO) || die("mep.h.new close: $!");
73
 
74
&swapfile("include/elf/mep.h");
75
 
76
redo_file ("bfd/reloc.c",
77
           "",
78
           "ENUMDOC\n  Toshiba Media Processor Relocations.\n\nCOMMENT\n",
79
           "ENUM\n  BFD_RELOC_MEP_%s\n",
80
           "");
81
 
82
$autogen = "    /* This section generated from bfd/mep-relocs.pl from include/elf/mep.h.  */\n";
83
 
84
redo_file ("bfd/elf32-mep.c",
85
           "MEPRELOC:HOWTO",
86
           $autogen,
87
           "MEPRELOC:END",
88
           "",
89
           "&emit_howto();",
90
           "MEPRELOC:MAP",
91
           $autogen,
92
           "MEPRELOC:END",
93
           "",
94
           "    MAP(%s);\n",
95
           "MEPRELOC:APPLY",
96
           $autogen,
97
           "MEPRELOC:END",
98
           "",
99
           "&emit_apply();",
100
           );
101
 
102
sub mask2shifts {
103
    my ($mask) = @_;
104
    my ($bits, $left, $right, $ci, $c, $cv);
105
    $bits = 0;
106
    $left = 0;
107
    $right = 32;
108
    for ($ci=0; $ci<length($mask); $ci++) {
109
        $c = substr($mask, $ci, 1);
110
        $left++;
111
        next if $c eq '-';
112
        $left = 0;
113
        $cv = ord($c) - ord('0');
114
        $cv -= ord('a') - ord('9') - 1 if $cv > 9;
115
        $right = $cv unless $right < $cv;
116
        $bits = $cv+1 unless $bits > $cv+1;
117
    }
118
    $mask =~ tr/-/1/c;
119
    $mask =~ tr/-/0/;
120
    ($rmask = $mask) =~ tr/01/10/;
121
    $mask = unpack("H*", pack("B*", $mask));
122
    $rmask = unpack("H*", pack("B*", $rmask));
123
    return ($bits, $left, $right, $mask, $rmask);
124
}
125
 
126
sub emit_howto {
127
    for ($i=2; $i<=$#relocs; $i++) {
128
        $mask = $pattern[$i];
129
 
130
        if (length($mask) == 8)     { $bytesize = 0; }
131
        elsif (length($mask) == 16) { $bytesize = 1; }
132
        elsif (length($mask) == 32) { $bytesize = 2; }
133
 
134
        ($bits, $left, $right, $mask) = mask2shifts ($mask);
135
        $bits[$i] = $bits;
136
        $pcrel = 0;
137
        $pcrel = 1 if $attrs[$i] =~ /pc-rel/i;
138
        $overflow = $sign[$i];
139
        $overflow = 'N' if $attrs[$i] =~ /no-overflow/;
140
 
141
        $c = "$relocs[$i],";
142
        printf(NEW "  MEPREL (R_MEP_%-10s%d,%3d,%2d,%2d,%2d,%2s, 0x%s),\n",
143
               $c, $bytesize, $bits, $left, $right, $pcrel, $overflow, $mask);
144
    }
145
}
146
 
147
sub emit_apply {
148
    for ($i=2; $i<=$#relocs; $i++) {
149
        $v = "u";
150
        $v = "s" if $sign[$i] =~ /S/;
151
        if (length($pattern[$i]) == 8) {
152
            $e = ''; # no endian swap for bytes
153
        } elsif ($pattern[$i] =~ /-/ || length($pattern[$i]) == 16) {
154
            $e = '^e2'; # endian swap - 2byte words only
155
        } else {
156
            $e = '^e4' # endian swap for data
157
        }
158
        print NEW "    case R_MEP_$relocs[$i]: /* $pattern[$i] */\n";
159
        if ($attrs[$i] =~ /tp-rel/i) {
160
            print NEW "      $v -= mep_tpoff_base(rel->r_offset);\n";
161
        }
162
        if ($attrs[$i] =~ /gp-rel/i) {
163
            print NEW "      $v -= mep_sdaoff_base(rel->r_offset);\n";
164
        }
165
        if ($attrs[$i] !~ /no-overflow/ && $bits[$i] < 32) {
166
            if ($v eq "u") {
167
                $max = (1 << $bits[$i]) - 1;
168
                print NEW "      if (u > $max) r = bfd_reloc_overflow;\n";
169
            } else {
170
                $min = -(1 << ($bits[$i]-1));
171
                $max = (1 << ($bits[$i]-1)) - 1;
172
                print NEW "      if ($min > s || s > $max) r = bfd_reloc_overflow;\n";
173
            }
174
        }
175
        for ($b=0; $b<length($pattern[$i]); $b += 8) {
176
            $mask = substr($pattern[$i], $b, 8);
177
            ($bits, $left, $right, $mask, $rmask) = mask2shifts ($mask);
178
            if ($left > $right) { $left -= $right; $right = 0; }
179
            else { $right -= $left; $left = 0; }
180
 
181
            if ($mask ne "00") {
182
                $bb = $b / 8;
183
                print NEW "      byte[$bb$e] = ";
184
                print NEW "(byte[$bb$e] & 0x$rmask) | " if $rmask ne "00";
185
                if ($left) {
186
                    print NEW "(($v << $left) & 0x$mask)";
187
                } elsif ($right) {
188
                    print NEW "(($v >> $right) & 0x$mask)";
189
                } else {
190
                    print NEW "($v & 0x$mask)";
191
                }
192
                print NEW ";\n";
193
            }
194
        }
195
        print NEW "      break;\n";
196
    }
197
}
198
 
199
 
200
#-----------------------------------------------------------------------------
201
 
202
sub redo_file {
203
    my ($file, @control) = @_;
204
    open(OLD, $file);
205
    open(NEW, "> $file.new") || die("$file.new create: $!");
206
 
207
    print "Scanning file $file ...\n";
208
 
209
    while (1) {
210
        $start = shift @control;
211
        $prefix = shift @control;
212
        $end = shift @control;
213
        $suffix = shift @control;
214
        $pattern = shift @control;
215
 
216
        if (!$start) {
217
            print NEW while <OLD>;
218
            last;
219
        }
220
 
221
        print "  looking for $start\n";
222
        while (<OLD>) {
223
            print NEW;
224
            last if /\Q$start\E/;
225
        }
226
        print "can't find $start\n" unless $_;
227
        last unless $_;
228
 
229
        print NEW $prefix;
230
        if ($pattern =~ /^\&/) {
231
            eval $pattern;
232
            die("$pattern: $@") if $@;
233
        } else {
234
            for $i (2..$#relocs) {
235
                printf (NEW "$pattern", $relocs[$i]) || die("$file.new write: $!");
236
                $pattern =~ s/^ENUM\n/ENUMX\n/;
237
            }
238
        }
239
        print NEW $suffix;
240
        while (<OLD>) {
241
            last if /\Q$end\E/;
242
        }
243
        print NEW;
244
    }
245
 
246
    close(OLD);
247
    close(NEW) || die("$file.new close: $!");
248
    &swapfile($file);
249
}
250
 
251
#-----------------------------------------------------------------------------
252
 
253
sub swapfile {
254
    my ($f) = @_;
255
    if ( ! -f "$f.save") {
256
        system "cp $f $f.save";
257
    }
258
    open(ORIG, $f);
259
    open(NEW, "$f.new");
260
    while (<ORIG>) {
261
        $n = <NEW>;
262
        if ($n ne $_) {
263
            close(ORIG);
264
            close(NEW);
265
            print "  Updating $f\n";
266
            rename "$f", "$f.old";
267
            rename "$f.new", "$f";
268
            return;
269
        }
270
    }
271
    close(ORIG);
272
    close(NEW);
273
    print "  No change to $f\n";
274
    unlink "$f.new";
275
}

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.