URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [binutils-2.18.50/] [gas/] [config/] [tc-avr.c] - Blame information for rev 38

Go to most recent revision | Details | Compare with Previous | View Log

/* tc-avr.c -- Assembler code for the ATMEL AVR
 
   Copyright 1999, 2000, 2001, 2002, 2004, 2005, 2006, 2007, 2008
   Free Software Foundation, Inc.
   Contributed by Denis Chertykov <denisc@overta.ru>
 
   This file is part of GAS, the GNU Assembler.
 
   GAS is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3, or (at your option)
   any later version.
 
   GAS is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
 
   You should have received a copy of the GNU General Public License
   along with GAS; see the file COPYING.  If not, write to
   the Free Software Foundation, 51 Franklin Street - Fifth Floor,
   Boston, MA 02110-1301, USA.  */
 
#include "as.h"
#include "safe-ctype.h"
#include "subsegs.h"
 
struct avr_opcodes_s
{
  char *        name;
  char *        constraints;
  int           insn_size;              /* In words.  */
  int           isa;
  unsigned int  bin_opcode;
};
 
#define AVR_INSN(NAME, CONSTR, OPCODE, SIZE, ISA, BIN) \
{#NAME, CONSTR, SIZE, ISA, BIN},
 
struct avr_opcodes_s avr_opcodes[] =
{
  #include "opcode/avr.h"
  {NULL, NULL, 0, 0, 0}
};
 
const char comment_chars[] = ";";
const char line_comment_chars[] = "#";
const char line_separator_chars[] = "$";
 
const char *md_shortopts = "m:";
struct mcu_type_s
{
  char *name;
  int isa;
  int mach;
};
 
/* XXX - devices that don't seem to exist (renamed, replaced with larger
   ones, or planned but never produced), left here for compatibility.
   TODO: hide them in show_mcu_list output?  */
 
static struct mcu_type_s mcu_types[] =
{
  {"avr1",       AVR_ISA_TINY1,   bfd_mach_avr1},
  {"avr2",       AVR_ISA_TINY2,   bfd_mach_avr2},
  {"avr3",       AVR_ISA_AVR3,    bfd_mach_avr3},
  {"avr4",       AVR_ISA_M8,      bfd_mach_avr4},
  {"avr5",       AVR_ISA_ALL,     bfd_mach_avr5},
  {"avr6",       AVR_ISA_ALL,     bfd_mach_avr6},
  {"at90s1200",  AVR_ISA_1200,    bfd_mach_avr1},
  {"attiny11",   AVR_ISA_TINY1,   bfd_mach_avr1},
  {"attiny12",   AVR_ISA_TINY1,   bfd_mach_avr1},
  {"attiny15",   AVR_ISA_TINY1,   bfd_mach_avr1},
  {"attiny28",   AVR_ISA_TINY1,   bfd_mach_avr1},
  {"at90s2313",  AVR_ISA_2xxx,    bfd_mach_avr2},
  {"at90s2323",  AVR_ISA_2xxx,    bfd_mach_avr2},
  {"at90s2333",  AVR_ISA_2xxx,    bfd_mach_avr2}, /* XXX -> 4433 */
  {"at90s2343",  AVR_ISA_2xxx,    bfd_mach_avr2},
  {"attiny22",   AVR_ISA_2xxx,    bfd_mach_avr2}, /* XXX -> 2343 */
  {"attiny26",   AVR_ISA_2xxe,    bfd_mach_avr2},
  {"at90s4433",  AVR_ISA_2xxx,    bfd_mach_avr2},
  {"at90s4414",  AVR_ISA_2xxx,    bfd_mach_avr2}, /* XXX -> 8515 */
  {"at90s4434",  AVR_ISA_2xxx,    bfd_mach_avr2}, /* XXX -> 8535 */
  {"at90s8515",  AVR_ISA_2xxx,    bfd_mach_avr2},
  {"at90s8535",  AVR_ISA_2xxx,    bfd_mach_avr2},
  {"at90c8534",  AVR_ISA_2xxx,    bfd_mach_avr2},
  {"at86rf401",  AVR_ISA_RF401,   bfd_mach_avr2},
  {"attiny13",   AVR_ISA_TINY2,   bfd_mach_avr2},
  {"attiny2313", AVR_ISA_TINY2,   bfd_mach_avr2},
  {"attiny261",  AVR_ISA_TINY2,   bfd_mach_avr2},
  {"attiny461",  AVR_ISA_TINY2,   bfd_mach_avr2},
  {"attiny861",  AVR_ISA_TINY2,   bfd_mach_avr2},
  {"attiny24",   AVR_ISA_TINY2,   bfd_mach_avr2},
  {"attiny44",   AVR_ISA_TINY2,   bfd_mach_avr2},
  {"attiny84",   AVR_ISA_TINY2,   bfd_mach_avr2},
  {"attiny25",   AVR_ISA_TINY2,   bfd_mach_avr2},
  {"attiny45",   AVR_ISA_TINY2,   bfd_mach_avr2},
  {"attiny85",   AVR_ISA_TINY2,   bfd_mach_avr2},
  {"attiny43u",  AVR_ISA_TINY2,   bfd_mach_avr2},
  {"attiny48",   AVR_ISA_TINY2,   bfd_mach_avr2},
  {"attiny88",   AVR_ISA_TINY2,   bfd_mach_avr2},
  {"atmega103",  AVR_ISA_M103,    bfd_mach_avr3},
  {"at43usb320", AVR_ISA_M103,    bfd_mach_avr3},
  {"at43usb355", AVR_ISA_M603,    bfd_mach_avr3},
  {"at76c711",   AVR_ISA_M603,    bfd_mach_avr3},
  {"at90usb82",  AVR_ISA_USB162,  bfd_mach_avr3},
  {"at90usb162", AVR_ISA_USB162,  bfd_mach_avr3},
  {"attiny167",  AVR_ISA_TINY3,   bfd_mach_avr3},
  {"atmega48",   AVR_ISA_PWMx,    bfd_mach_avr4},
  {"atmega48p",  AVR_ISA_PWMx,    bfd_mach_avr4},
  {"atmega8",    AVR_ISA_M8,      bfd_mach_avr4},
  {"atmega88",   AVR_ISA_PWMx,    bfd_mach_avr4},
  {"atmega88p",  AVR_ISA_PWMx,    bfd_mach_avr4},
  {"atmega8515", AVR_ISA_M8,      bfd_mach_avr4},
  {"atmega8535", AVR_ISA_M8,      bfd_mach_avr4},
  {"atmega8hva", AVR_ISA_PWMx,    bfd_mach_avr4},
  {"at90pwm1",   AVR_ISA_PWMx,    bfd_mach_avr4},
  {"at90pwm2",   AVR_ISA_PWMx,    bfd_mach_avr4},
  {"at90pwm2b",  AVR_ISA_PWMx,    bfd_mach_avr4},
  {"at90pwm3",   AVR_ISA_PWMx,    bfd_mach_avr4},
  {"at90pwm3b",  AVR_ISA_PWMx,    bfd_mach_avr4},
  {"atmega16",   AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega161",  AVR_ISA_M161,    bfd_mach_avr5},
  {"atmega162",  AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega163",  AVR_ISA_M161,    bfd_mach_avr5},
  {"atmega164p", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega165",  AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega165p", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega168",  AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega168p", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega169",  AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega169p", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega32",   AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega323",  AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega324p", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega325",  AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega325p", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega328p", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega329",  AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega329p", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega3250", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega3250p",AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega3290", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega3290p",AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega32hvb",AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega406",  AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega64",   AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega640",  AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega644",  AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega644p", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega128",  AVR_ISA_M128,    bfd_mach_avr5},
  {"atmega1280", AVR_ISA_M128,    bfd_mach_avr5},
  {"atmega1281", AVR_ISA_M128,    bfd_mach_avr5},
  {"atmega1284p",AVR_ISA_M128,    bfd_mach_avr5},
  {"atmega645",  AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega649",  AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega6450", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega6490", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega16hva",AVR_ISA_M323,    bfd_mach_avr5},
  {"at90can32" , AVR_ISA_M323,    bfd_mach_avr5},
  {"at90can64" , AVR_ISA_M323,    bfd_mach_avr5},
  {"at90can128", AVR_ISA_M128,    bfd_mach_avr5},
  {"at90pwm216", AVR_ISA_M323,    bfd_mach_avr5},
  {"at90pwm316", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega32c1", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega32m1", AVR_ISA_M323,    bfd_mach_avr5},
  {"atmega32u4", AVR_ISA_M323,    bfd_mach_avr5},
  {"at90usb646", AVR_ISA_M323,    bfd_mach_avr5},
  {"at90usb647", AVR_ISA_M323,    bfd_mach_avr5},
  {"at90usb1286",AVR_ISA_M128,    bfd_mach_avr5},
  {"at90usb1287",AVR_ISA_M128,    bfd_mach_avr5},
  {"at94k",      AVR_ISA_94K,     bfd_mach_avr5},
  {"atmega2560", AVR_ISA_ALL,     bfd_mach_avr6},
  {"atmega2561", AVR_ISA_ALL,     bfd_mach_avr6},
  {NULL, 0, 0}
};
 
/* Current MCU type.  */
static struct mcu_type_s   default_mcu = {"avr2", AVR_ISA_2xxx,bfd_mach_avr2};
static struct mcu_type_s * avr_mcu = & default_mcu;
 
/* AVR target-specific switches.  */
struct avr_opt_s
{
  int all_opcodes;  /* -mall-opcodes: accept all known AVR opcodes.  */
  int no_skip_bug;  /* -mno-skip-bug: no warnings for skipping 2-word insns.  */
  int no_wrap;      /* -mno-wrap: reject rjmp/rcall with 8K wrap-around.  */
};
 
static struct avr_opt_s avr_opt = { 0, 0, 0 };
 
const char EXP_CHARS[] = "eE";
const char FLT_CHARS[] = "dD";
 
static void avr_set_arch (int);
 
/* The target specific pseudo-ops which we support.  */
const pseudo_typeS md_pseudo_table[] =
{
  {"arch", avr_set_arch,        0},
  { NULL,       NULL,           0}
};
 
#define LDI_IMMEDIATE(x) (((x) & 0xf) | (((x) << 4) & 0xf00))
 
#define EXP_MOD_NAME(i)       exp_mod[i].name
#define EXP_MOD_RELOC(i)      exp_mod[i].reloc
#define EXP_MOD_NEG_RELOC(i)  exp_mod[i].neg_reloc
#define HAVE_PM_P(i)          exp_mod[i].have_pm
 
struct exp_mod_s
{
  char *                    name;
  bfd_reloc_code_real_type  reloc;
  bfd_reloc_code_real_type  neg_reloc;
  int                       have_pm;
};
 
static struct exp_mod_s exp_mod[] =
{
  {"hh8",    BFD_RELOC_AVR_HH8_LDI,    BFD_RELOC_AVR_HH8_LDI_NEG,    1},
  {"pm_hh8", BFD_RELOC_AVR_HH8_LDI_PM, BFD_RELOC_AVR_HH8_LDI_PM_NEG, 0},
  {"hi8",    BFD_RELOC_AVR_HI8_LDI,    BFD_RELOC_AVR_HI8_LDI_NEG,    1},
  {"pm_hi8", BFD_RELOC_AVR_HI8_LDI_PM, BFD_RELOC_AVR_HI8_LDI_PM_NEG, 0},
  {"lo8",    BFD_RELOC_AVR_LO8_LDI,    BFD_RELOC_AVR_LO8_LDI_NEG,    1},
  {"pm_lo8", BFD_RELOC_AVR_LO8_LDI_PM, BFD_RELOC_AVR_LO8_LDI_PM_NEG, 0},
  {"hlo8",   BFD_RELOC_AVR_HH8_LDI,    BFD_RELOC_AVR_HH8_LDI_NEG,    0},
  {"hhi8",   BFD_RELOC_AVR_MS8_LDI,    BFD_RELOC_AVR_MS8_LDI_NEG,    0},
};
 
/* A union used to store indicies into the exp_mod[] array
   in a hash table which expects void * data types.  */
typedef union
{
  void * ptr;
  int    index;
} mod_index;
 
/* Opcode hash table.  */
static struct hash_control *avr_hash;
 
/* Reloc modifiers hash control (hh8,hi8,lo8,pm_xx).  */
static struct hash_control *avr_mod_hash;
 
#define OPTION_MMCU 'm'
enum options
{
  OPTION_ALL_OPCODES = OPTION_MD_BASE + 1,
  OPTION_NO_SKIP_BUG,
  OPTION_NO_WRAP
};
 
struct option md_longopts[] =
{
  { "mmcu",   required_argument, NULL, OPTION_MMCU        },
  { "mall-opcodes", no_argument, NULL, OPTION_ALL_OPCODES },
  { "mno-skip-bug", no_argument, NULL, OPTION_NO_SKIP_BUG },
  { "mno-wrap",     no_argument, NULL, OPTION_NO_WRAP     },
  { NULL, no_argument, NULL, 0 }
};
 
size_t md_longopts_size = sizeof (md_longopts);
 
/* Display nicely formatted list of known MCU names.  */
 
static void
show_mcu_list (FILE *stream)
{
  int i, x;
 
  fprintf (stream, _("Known MCU names:"));
  x = 1000;
 
  for (i = 0; mcu_types[i].name; i++)
    {
      int len = strlen (mcu_types[i].name);
 
      x += len + 1;
 
      if (x < 75)
        fprintf (stream, " %s", mcu_types[i].name);
      else
        {
          fprintf (stream, "\n  %s", mcu_types[i].name);
          x = len + 2;
        }
    }
 
  fprintf (stream, "\n");
}
 
static inline char *
skip_space (char *s)
{
  while (*s == ' ' || *s == '\t')
    ++s;
  return s;
}
 
/* Extract one word from FROM and copy it to TO.  */
 
static char *
extract_word (char *from, char *to, int limit)
{
  char *op_start;
  char *op_end;
  int size = 0;
 
  /* Drop leading whitespace.  */
  from = skip_space (from);
  *to = 0;
 
  /* Find the op code end.  */
  for (op_start = op_end = from; *op_end != 0 && is_part_of_name (*op_end);)
    {
      to[size++] = *op_end++;
      if (size + 1 >= limit)
        break;
    }
 
  to[size] = 0;
  return op_end;
}
 
int
md_estimate_size_before_relax (fragS *fragp ATTRIBUTE_UNUSED,
                               asection *seg ATTRIBUTE_UNUSED)
{
  abort ();
  return 0;
}
 
void
md_show_usage (FILE *stream)
{
  fprintf (stream,
      _("AVR options:\n"
        "  -mmcu=[avr-name] select microcontroller variant\n"
        "                   [avr-name] can be:\n"
        "                   avr1 - AT90S1200, ATtiny1x, ATtiny28\n"
        "                   avr2 - AT90S2xxx, AT90S4xxx, AT90S8xxx, ATtiny22\n"
        "                   avr3 - ATmega103\n"
        "                   avr4 - ATmega8, ATmega88\n"
        "                   avr5 - ATmega161, ATmega163, ATmega32, AT94K\n"
        "                   or immediate microcontroller name.\n"));
  fprintf (stream,
      _("  -mall-opcodes    accept all AVR opcodes, even if not supported by MCU\n"
        "  -mno-skip-bug    disable warnings for skipping two-word instructions\n"
        "                   (default for avr4, avr5)\n"
        "  -mno-wrap        reject rjmp/rcall instructions with 8K wrap-around\n"
        "                   (default for avr3, avr5)\n"));
  show_mcu_list (stream);
}
 
static void
avr_set_arch (int dummy ATTRIBUTE_UNUSED)
{
  char str[20];
 
  input_line_pointer = extract_word (input_line_pointer, str, 20);
  md_parse_option (OPTION_MMCU, str);
  bfd_set_arch_mach (stdoutput, TARGET_ARCH, avr_mcu->mach);
}
 
int
md_parse_option (int c, char *arg)
{
  switch (c)
    {
    case OPTION_MMCU:
      {
        int i;
        char *s = alloca (strlen (arg) + 1);
 
        {
          char *t = s;
          char *arg1 = arg;
 
          do
            *t = TOLOWER (*arg1++);
          while (*t++);
        }
 
        for (i = 0; mcu_types[i].name; ++i)
          if (strcmp (mcu_types[i].name, s) == 0)
            break;
 
        if (!mcu_types[i].name)
          {
            show_mcu_list (stderr);
            as_fatal (_("unknown MCU: %s\n"), arg);
          }
 
        /* It is OK to redefine mcu type within the same avr[1-5] bfd machine
           type - this for allows passing -mmcu=... via gcc ASM_SPEC as well
           as .arch ... in the asm output at the same time.  */
        if (avr_mcu == &default_mcu || avr_mcu->mach == mcu_types[i].mach)
          avr_mcu = &mcu_types[i];
        else
          as_fatal (_("redefinition of mcu type `%s' to `%s'"),
                    avr_mcu->name, mcu_types[i].name);
        return 1;
      }
    case OPTION_ALL_OPCODES:
      avr_opt.all_opcodes = 1;
      return 1;
    case OPTION_NO_SKIP_BUG:
      avr_opt.no_skip_bug = 1;
      return 1;
    case OPTION_NO_WRAP:
      avr_opt.no_wrap = 1;
      return 1;
    }
 
  return 0;
}
 
symbolS *
md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
{
  return NULL;
}
 
char *
md_atof (int type, char *litP, int *sizeP)
{
  return ieee_md_atof (type, litP, sizeP, FALSE);
}
 
void
md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED,
                 asection *sec ATTRIBUTE_UNUSED,
                 fragS *fragP ATTRIBUTE_UNUSED)
{
  abort ();
}
 
void
md_begin (void)
{
  unsigned int i;
  struct avr_opcodes_s *opcode;
 
  avr_hash = hash_new ();
 
  /* Insert unique names into hash table.  This hash table then provides a
     quick index to the first opcode with a particular name in the opcode
     table.  */
  for (opcode = avr_opcodes; opcode->name; opcode++)
    hash_insert (avr_hash, opcode->name, (char *) opcode);
 
  avr_mod_hash = hash_new ();
 
  for (i = 0; i < ARRAY_SIZE (exp_mod); ++i)
    {
      mod_index m;
 
      m.index = i + 10;
      hash_insert (avr_mod_hash, EXP_MOD_NAME (i), m.ptr);
    }
 
  bfd_set_arch_mach (stdoutput, TARGET_ARCH, avr_mcu->mach);
}
 
/* Resolve STR as a constant expression and return the result.
   If result greater than MAX then error.  */
 
static unsigned int
avr_get_constant (char *str, int max)
{
  expressionS ex;
 
  str = skip_space (str);
  input_line_pointer = str;
  expression (& ex);
 
  if (ex.X_op != O_constant)
    as_bad (_("constant value required"));
 
  if (ex.X_add_number > max || ex.X_add_number < 0)
    as_bad (_("number must be positive and less than %d"), max + 1);
 
  return ex.X_add_number;
}
 
/* Parse for ldd/std offset.  */
 
static void
avr_offset_expression (expressionS *exp)
{
  char *str = input_line_pointer;
  char *tmp;
  char op[8];
 
  tmp = str;
  str = extract_word (str, op, sizeof (op));
 
  input_line_pointer = tmp;
  expression (exp);
 
  /* Warn about expressions that fail to use lo8 ().  */
  if (exp->X_op == O_constant)
    {
      int x = exp->X_add_number;
 
      if (x < -255 || x > 255)
        as_warn (_("constant out of 8-bit range: %d"), x);
    }
}
 
/* Parse ordinary expression.  */
 
static char *
parse_exp (char *s, expressionS *op)
{
  input_line_pointer = s;
  expression (op);
  if (op->X_op == O_absent)
    as_bad (_("missing operand"));
  return input_line_pointer;
}
 
/* Parse special expressions (needed for LDI command):
   xx8 (address)
   xx8 (-address)
   pm_xx8 (address)
   pm_xx8 (-address)
   where xx is: hh, hi, lo.  */
 
static bfd_reloc_code_real_type
avr_ldi_expression (expressionS *exp)
{
  char *str = input_line_pointer;
  char *tmp;
  char op[8];
  int mod;
  int linker_stubs_should_be_generated = 0;
 
  tmp = str;
 
  str = extract_word (str, op, sizeof (op));
 
  if (op[0])
    {
      mod_index m;
 
      m.ptr = hash_find (avr_mod_hash, op);
      mod = m.index;
 
      if (mod)
        {
          int closes = 0;
 
          mod -= 10;
          str = skip_space (str);
 
          if (*str == '(')
            {
              bfd_reloc_code_real_type  reloc_to_return;
              int neg_p = 0;
 
              ++str;
 
              if (strncmp ("pm(", str, 3) == 0
                  || strncmp ("gs(",str,3) == 0
                  || strncmp ("-(gs(",str,5) == 0
                  || strncmp ("-(pm(", str, 5) == 0)
                {
                  if (HAVE_PM_P (mod))
                    {
                      ++mod;
                      ++closes;
                    }
                  else
                    as_bad (_("illegal expression"));
 
                  if (str[0] == 'g' || str[2] == 'g')
                    linker_stubs_should_be_generated = 1;
 
                  if (*str == '-')
                    {
                      neg_p = 1;
                      ++closes;
                      str += 5;
                    }
                  else
                    str += 3;
                }
 
              if (*str == '-' && *(str + 1) == '(')
                {
                  neg_p ^= 1;
                  ++closes;
                  str += 2;
                }
 
              input_line_pointer = str;
              expression (exp);
 
              do
                {
                  if (*input_line_pointer != ')')
                    {
                      as_bad (_("`)' required"));
                      break;
                    }
                  input_line_pointer++;
                }
              while (closes--);
 
              reloc_to_return =
                neg_p ? EXP_MOD_NEG_RELOC (mod) : EXP_MOD_RELOC (mod);
              if (linker_stubs_should_be_generated)
                {
                  switch (reloc_to_return)
                    {
                    case BFD_RELOC_AVR_LO8_LDI_PM:
                      reloc_to_return = BFD_RELOC_AVR_LO8_LDI_GS;
                      break;
                    case BFD_RELOC_AVR_HI8_LDI_PM:
                      reloc_to_return = BFD_RELOC_AVR_HI8_LDI_GS;
                      break;
 
                    default:
                      as_warn (_("expression dangerous with linker stubs"));
                    }
                }
              return reloc_to_return;
            }
        }
    }
 
  input_line_pointer = tmp;
  expression (exp);
 
  /* Warn about expressions that fail to use lo8 ().  */
  if (exp->X_op == O_constant)
    {
      int x = exp->X_add_number;
 
      if (x < -255 || x > 255)
        as_warn (_("constant out of 8-bit range: %d"), x);
    }
 
  return BFD_RELOC_AVR_LDI;
}
 
/* Parse one instruction operand.
   Return operand bitmask.  Also fixups can be generated.  */
 
static unsigned int
avr_operand (struct avr_opcodes_s *opcode,
             int where,
             char *op,
             char **line)
{
  expressionS op_expr;
  unsigned int op_mask = 0;
  char *str = skip_space (*line);
 
  switch (*op)
    {
      /* Any register operand.  */
    case 'w':
    case 'd':
    case 'r':
    case 'a':
    case 'v':
      if (*str == 'r' || *str == 'R')
        {
          char r_name[20];
 
          str = extract_word (str, r_name, sizeof (r_name));
          op_mask = 0xff;
          if (ISDIGIT (r_name[1]))
            {
              if (r_name[2] == '\0')
                op_mask = r_name[1] - '0';
              else if (r_name[1] != '0'
                       && ISDIGIT (r_name[2])
                       && r_name[3] == '\0')
                op_mask = (r_name[1] - '0') * 10 + r_name[2] - '0';
            }
        }
      else
        {
          op_mask = avr_get_constant (str, 31);
          str = input_line_pointer;
        }
 
      if (op_mask <= 31)
        {
          switch (*op)
            {
            case 'a':
              if (op_mask < 16 || op_mask > 23)
                as_bad (_("register r16-r23 required"));
              op_mask -= 16;
              break;
 
            case 'd':
              if (op_mask < 16)
                as_bad (_("register number above 15 required"));
              op_mask -= 16;
              break;
 
            case 'v':
              if (op_mask & 1)
                as_bad (_("even register number required"));
              op_mask >>= 1;
              break;
 
            case 'w':
              if ((op_mask & 1) || op_mask < 24)
                as_bad (_("register r24, r26, r28 or r30 required"));
              op_mask = (op_mask - 24) >> 1;
              break;
            }
          break;
        }
      as_bad (_("register name or number from 0 to 31 required"));
      break;
 
    case 'e':
      {
        char c;
 
        if (*str == '-')
          {
            str = skip_space (str + 1);
            op_mask = 0x1002;
          }
        c = TOLOWER (*str);
        if (c == 'x')
          op_mask |= 0x100c;
        else if (c == 'y')
          op_mask |= 0x8;
        else if (c != 'z')
          as_bad (_("pointer register (X, Y or Z) required"));
 
        str = skip_space (str + 1);
        if (*str == '+')
          {
            ++str;
            if (op_mask & 2)
              as_bad (_("cannot both predecrement and postincrement"));
            op_mask |= 0x1001;
          }
 
        /* avr1 can do "ld r,Z" and "st Z,r" but no other pointer
           registers, no predecrement, no postincrement.  */
        if (!avr_opt.all_opcodes && (op_mask & 0x100F)
            && !(avr_mcu->isa & AVR_ISA_SRAM))
          as_bad (_("addressing mode not supported"));
      }
      break;
 
    case 'z':
      if (*str == '-')
        as_bad (_("can't predecrement"));
 
      if (! (*str == 'z' || *str == 'Z'))
        as_bad (_("pointer register Z required"));
 
      str = skip_space (str + 1);
 
      if (*str == '+')
        {
          ++str;
          op_mask |= 1;
        }
 
      /* attiny26 can do "lpm" and "lpm r,Z" but not "lpm r,Z+".  */
      if (!avr_opt.all_opcodes
          && (op_mask & 0x0001)
          && !(avr_mcu->isa & AVR_ISA_MOVW))
        as_bad (_("postincrement not supported"));
      break;
 
    case 'b':
      {
        char c = TOLOWER (*str++);
 
        if (c == 'y')
          op_mask |= 0x8;
        else if (c != 'z')
          as_bad (_("pointer register (Y or Z) required"));
        str = skip_space (str);
        if (*str++ == '+')
          {
            input_line_pointer = str;
            avr_offset_expression (& op_expr);
            str = input_line_pointer;
            fix_new_exp (frag_now, where, 3,
                         &op_expr, FALSE, BFD_RELOC_AVR_6);
          }
      }
      break;
 
    case 'h':
      str = parse_exp (str, &op_expr);
      fix_new_exp (frag_now, where, opcode->insn_size * 2,
                   &op_expr, FALSE, BFD_RELOC_AVR_CALL);
      break;
 
    case 'L':
      str = parse_exp (str, &op_expr);
      fix_new_exp (frag_now, where, opcode->insn_size * 2,
                   &op_expr, TRUE, BFD_RELOC_AVR_13_PCREL);
      break;
 
    case 'l':
      str = parse_exp (str, &op_expr);
      fix_new_exp (frag_now, where, opcode->insn_size * 2,
                   &op_expr, TRUE, BFD_RELOC_AVR_7_PCREL);
      break;
 
    case 'i':
      str = parse_exp (str, &op_expr);
      fix_new_exp (frag_now, where + 2, opcode->insn_size * 2,
                   &op_expr, FALSE, BFD_RELOC_16);
      break;
 
    case 'M':
      {
        bfd_reloc_code_real_type r_type;
 
        input_line_pointer = str;
        r_type = avr_ldi_expression (&op_expr);
        str = input_line_pointer;
        fix_new_exp (frag_now, where, 3,
                     &op_expr, FALSE, r_type);
      }
      break;
 
    case 'n':
      {
        unsigned int x;
 
        x = ~avr_get_constant (str, 255);
        str = input_line_pointer;
        op_mask |= (x & 0xf) | ((x << 4) & 0xf00);
      }
      break;
 
    case 'K':
      input_line_pointer = str;
      avr_offset_expression (& op_expr);
      str = input_line_pointer;
      fix_new_exp (frag_now, where, 3,
                   & op_expr, FALSE, BFD_RELOC_AVR_6_ADIW);
      break;
 
    case 'S':
    case 's':
      {
        unsigned int x;
 
        x = avr_get_constant (str, 7);
        str = input_line_pointer;
        if (*op == 'S')
          x <<= 4;
        op_mask |= x;
      }
      break;
 
    case 'P':
      {
        unsigned int x;
 
        x = avr_get_constant (str, 63);
        str = input_line_pointer;
        op_mask |= (x & 0xf) | ((x & 0x30) << 5);
      }
      break;
 
    case 'p':
      {
        unsigned int x;
 
        x = avr_get_constant (str, 31);
        str = input_line_pointer;
        op_mask |= x << 3;
      }
      break;
 
    case '?':
      break;
 
    default:
      as_bad (_("unknown constraint `%c'"), *op);
    }
 
  *line = str;
  return op_mask;
}
 
/* Parse instruction operands.
   Return binary opcode.  */
 
static unsigned int
avr_operands (struct avr_opcodes_s *opcode, char **line)
{
  char *op = opcode->constraints;
  unsigned int bin = opcode->bin_opcode;
  char *frag = frag_more (opcode->insn_size * 2);
  char *str = *line;
  int where = frag - frag_now->fr_literal;
  static unsigned int prev = 0;  /* Previous opcode.  */
 
  /* Opcode have operands.  */
  if (*op)
    {
      unsigned int reg1 = 0;
      unsigned int reg2 = 0;
      int reg1_present = 0;
      int reg2_present = 0;
 
      /* Parse first operand.  */
      if (REGISTER_P (*op))
        reg1_present = 1;
      reg1 = avr_operand (opcode, where, op, &str);
      ++op;
 
      /* Parse second operand.  */
      if (*op)
        {
          if (*op == ',')
            ++op;
 
          if (*op == '=')
            {
              reg2 = reg1;
              reg2_present = 1;
            }
          else
            {
              if (REGISTER_P (*op))
                reg2_present = 1;
 
              str = skip_space (str);
              if (*str++ != ',')
                as_bad (_("`,' required"));
              str = skip_space (str);
 
              reg2 = avr_operand (opcode, where, op, &str);
            }
 
          if (reg1_present && reg2_present)
            reg2 = (reg2 & 0xf) | ((reg2 << 5) & 0x200);
          else if (reg2_present)
            reg2 <<= 4;
        }
      if (reg1_present)
        reg1 <<= 4;
      bin |= reg1 | reg2;
    }
 
  /* Detect undefined combinations (like ld r31,Z+).  */
  if (!avr_opt.all_opcodes && AVR_UNDEF_P (bin))
    as_warn (_("undefined combination of operands"));
 
  if (opcode->insn_size == 2)
    {
      /* Warn if the previous opcode was cpse/sbic/sbis/sbrc/sbrs
         (AVR core bug, fixed in the newer devices).  */
      if (!(avr_opt.no_skip_bug ||
            (avr_mcu->isa & (AVR_ISA_MUL | AVR_ISA_MOVW)))
          && AVR_SKIP_P (prev))
        as_warn (_("skipping two-word instruction"));
 
      bfd_putl32 ((bfd_vma) bin, frag);
    }
  else
    bfd_putl16 ((bfd_vma) bin, frag);
 
  prev = bin;
  *line = str;
  return bin;
}
 
/* GAS will call this function for each section at the end of the assembly,
   to permit the CPU backend to adjust the alignment of a section.  */
 
valueT
md_section_align (asection *seg, valueT addr)
{
  int align = bfd_get_section_alignment (stdoutput, seg);
  return ((addr + (1 << align) - 1) & (-1 << align));
}
 
/* If you define this macro, it should return the offset between the
   address of a PC relative fixup and the position from which the PC
   relative adjustment should be made.  On many processors, the base
   of a PC relative instruction is the next instruction, so this
   macro would return the length of an instruction.  */
 
long
md_pcrel_from_section (fixS *fixp, segT sec)
{
  if (fixp->fx_addsy != (symbolS *) NULL
      && (!S_IS_DEFINED (fixp->fx_addsy)
          || (S_GET_SEGMENT (fixp->fx_addsy) != sec)))
    return 0;
 
  return fixp->fx_frag->fr_address + fixp->fx_where;
}
 
/* GAS will call this for each fixup.  It should store the correct
   value in the object file.  */
 
void
md_apply_fix (fixS *fixP, valueT * valP, segT seg)
{
  unsigned char *where;
  unsigned long insn;
  long value = *valP;
 
  if (fixP->fx_addsy == (symbolS *) NULL)
    fixP->fx_done = 1;
 
  else if (fixP->fx_pcrel)
    {
      segT s = S_GET_SEGMENT (fixP->fx_addsy);
 
      if (s == seg || s == absolute_section)
        {
          value += S_GET_VALUE (fixP->fx_addsy);
          fixP->fx_done = 1;
        }
    }
 
  /* We don't actually support subtracting a symbol.  */
  if (fixP->fx_subsy != (symbolS *) NULL)
    as_bad_where (fixP->fx_file, fixP->fx_line, _("expression too complex"));
 
  switch (fixP->fx_r_type)
    {
    default:
      fixP->fx_no_overflow = 1;
      break;
    case BFD_RELOC_AVR_7_PCREL:
    case BFD_RELOC_AVR_13_PCREL:
    case BFD_RELOC_32:
    case BFD_RELOC_16:
    case BFD_RELOC_AVR_CALL:
      break;
    }
 
  if (fixP->fx_done)
    {
      /* Fetch the instruction, insert the fully resolved operand
         value, and stuff the instruction back again.  */
      where = (unsigned char *) fixP->fx_frag->fr_literal + fixP->fx_where;
      insn = bfd_getl16 (where);
 
      switch (fixP->fx_r_type)
        {
        case BFD_RELOC_AVR_7_PCREL:
          if (value & 1)
            as_bad_where (fixP->fx_file, fixP->fx_line,
                          _("odd address operand: %ld"), value);
 
          /* Instruction addresses are always right-shifted by 1.  */
          value >>= 1;
          --value;                      /* Correct PC.  */
 
          if (value < -64 || value > 63)
            as_bad_where (fixP->fx_file, fixP->fx_line,
                          _("operand out of range: %ld"), value);
          value = (value << 3) & 0x3f8;
          bfd_putl16 ((bfd_vma) (value | insn), where);
          break;
 
        case BFD_RELOC_AVR_13_PCREL:
          if (value & 1)
            as_bad_where (fixP->fx_file, fixP->fx_line,
                          _("odd address operand: %ld"), value);
 
          /* Instruction addresses are always right-shifted by 1.  */
          value >>= 1;
          --value;                      /* Correct PC.  */
 
          if (value < -2048 || value > 2047)
            {
              /* No wrap for devices with >8K of program memory.  */
              if ((avr_mcu->isa & AVR_ISA_MEGA) || avr_opt.no_wrap)
                as_bad_where (fixP->fx_file, fixP->fx_line,
                              _("operand out of range: %ld"), value);
            }
 
          value &= 0xfff;
          bfd_putl16 ((bfd_vma) (value | insn), where);
          break;
 
        case BFD_RELOC_32:
          bfd_putl16 ((bfd_vma) value, where);
          break;
 
        case BFD_RELOC_16:
          bfd_putl16 ((bfd_vma) value, where);
          break;
 
        case BFD_RELOC_AVR_16_PM:
          bfd_putl16 ((bfd_vma) (value >> 1), where);
          break;
 
        case BFD_RELOC_AVR_LDI:
          if (value > 255)
            as_bad_where (fixP->fx_file, fixP->fx_line,
                          _("operand out of range: %ld"), value);
          bfd_putl16 ((bfd_vma) insn | LDI_IMMEDIATE (value), where);
          break;
 
        case BFD_RELOC_AVR_6:
          if ((value > 63) || (value < 0))
            as_bad_where (fixP->fx_file, fixP->fx_line,
                          _("operand out of range: %ld"), value);
          bfd_putl16 ((bfd_vma) insn | ((value & 7) | ((value & (3 << 3)) << 7) | ((value & (1 << 5)) << 8)), where);
          break;
 
        case BFD_RELOC_AVR_6_ADIW:
          if ((value > 63) || (value < 0))
            as_bad_where (fixP->fx_file, fixP->fx_line,
                          _("operand out of range: %ld"), value);
          bfd_putl16 ((bfd_vma) insn | (value & 0xf) | ((value & 0x30) << 2), where);
          break;
 
        case BFD_RELOC_AVR_LO8_LDI:
          bfd_putl16 ((bfd_vma) insn | LDI_IMMEDIATE (value), where);
          break;
 
        case BFD_RELOC_AVR_HI8_LDI:
          bfd_putl16 ((bfd_vma) insn | LDI_IMMEDIATE (value >> 8), where);
          break;
 
        case BFD_RELOC_AVR_MS8_LDI:
          bfd_putl16 ((bfd_vma) insn | LDI_IMMEDIATE (value >> 24), where);
          break;
 
        case BFD_RELOC_AVR_HH8_LDI:
          bfd_putl16 ((bfd_vma) insn | LDI_IMMEDIATE (value >> 16), where);
          break;
 
        case BFD_RELOC_AVR_LO8_LDI_NEG:
          bfd_putl16 ((bfd_vma) insn | LDI_IMMEDIATE (-value), where);
          break;
 
        case BFD_RELOC_AVR_HI8_LDI_NEG:
          bfd_putl16 ((bfd_vma) insn | LDI_IMMEDIATE (-value >> 8), where);
          break;
 
        case BFD_RELOC_AVR_MS8_LDI_NEG:
          bfd_putl16 ((bfd_vma) insn | LDI_IMMEDIATE (-value >> 24), where);
          break;
 
        case BFD_RELOC_AVR_HH8_LDI_NEG:
          bfd_putl16 ((bfd_vma) insn | LDI_IMMEDIATE (-value >> 16), where);
          break;
 
        case BFD_RELOC_AVR_LO8_LDI_PM:
          bfd_putl16 ((bfd_vma) insn | LDI_IMMEDIATE (value >> 1), where);
          break;
 
        case BFD_RELOC_AVR_HI8_LDI_PM:
          bfd_putl16 ((bfd_vma) insn | LDI_IMMEDIATE (value >> 9), where);
          break;
 
        case BFD_RELOC_AVR_HH8_LDI_PM:
          bfd_putl16 ((bfd_vma) insn | LDI_IMMEDIATE (value >> 17), where);
          break;
 
        case BFD_RELOC_AVR_LO8_LDI_PM_NEG:
          bfd_putl16 ((bfd_vma) insn | LDI_IMMEDIATE (-value >> 1), where);
          break;
 
        case BFD_RELOC_AVR_HI8_LDI_PM_NEG:
          bfd_putl16 ((bfd_vma) insn | LDI_IMMEDIATE (-value >> 9), where);
          break;
 
        case BFD_RELOC_AVR_HH8_LDI_PM_NEG:
          bfd_putl16 ((bfd_vma) insn | LDI_IMMEDIATE (-value >> 17), where);
          break;
 
        case BFD_RELOC_AVR_CALL:
          {
            unsigned long x;
 
            x = bfd_getl16 (where);
            if (value & 1)
              as_bad_where (fixP->fx_file, fixP->fx_line,
                            _("odd address operand: %ld"), value);
            value >>= 1;
            x |= ((value & 0x10000) | ((value << 3) & 0x1f00000)) >> 16;
            bfd_putl16 ((bfd_vma) x, where);
            bfd_putl16 ((bfd_vma) (value & 0xffff), where + 2);
          }
          break;
 
        default:
          as_fatal (_("line %d: unknown relocation type: 0x%x"),
                    fixP->fx_line, fixP->fx_r_type);
          break;
        }
    }
  else
    {
      switch (fixP->fx_r_type)
        {
        case -BFD_RELOC_AVR_HI8_LDI_NEG:
        case -BFD_RELOC_AVR_HI8_LDI:
        case -BFD_RELOC_AVR_LO8_LDI_NEG:
        case -BFD_RELOC_AVR_LO8_LDI:
          as_bad_where (fixP->fx_file, fixP->fx_line,
                        _("only constant expression allowed"));
          fixP->fx_done = 1;
          break;
        default:
          break;
        }
    }
}
 
/* GAS will call this to generate a reloc, passing the resulting reloc
   to `bfd_install_relocation'.  This currently works poorly, as
   `bfd_install_relocation' often does the wrong thing, and instances of
   `tc_gen_reloc' have been written to work around the problems, which
   in turns makes it difficult to fix `bfd_install_relocation'.  */
 
/* If while processing a fixup, a reloc really needs to be created
   then it is done here.  */
 
arelent *
tc_gen_reloc (asection *seg ATTRIBUTE_UNUSED,
              fixS *fixp)
{
  arelent *reloc;
 
  if (fixp->fx_addsy && fixp->fx_subsy)
    {
      long value = 0;
 
      if ((S_GET_SEGMENT (fixp->fx_addsy) != S_GET_SEGMENT (fixp->fx_subsy))
          || S_GET_SEGMENT (fixp->fx_addsy) == undefined_section)
        {
          as_bad_where (fixp->fx_file, fixp->fx_line,
              "Difference of symbols in different sections is not supported");
          return NULL;
        }
 
      /* We are dealing with two symbols defined in the same section.
         Let us fix-up them here.  */
      value += S_GET_VALUE (fixp->fx_addsy);
      value -= S_GET_VALUE (fixp->fx_subsy);
 
      /* When fx_addsy and fx_subsy both are zero, md_apply_fix
         only takes it's second operands for the fixup value.  */
      fixp->fx_addsy = NULL;
      fixp->fx_subsy = NULL;
      md_apply_fix (fixp, (valueT *) &value, NULL);
 
      return NULL;
    }
 
  reloc = xmalloc (sizeof (arelent));
 
  reloc->sym_ptr_ptr = xmalloc (sizeof (asymbol *));
  *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
 
  reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
  reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type);
  if (reloc->howto == (reloc_howto_type *) NULL)
    {
      as_bad_where (fixp->fx_file, fixp->fx_line,
                    _("reloc %d not supported by object file format"),
                    (int) fixp->fx_r_type);
      return NULL;
    }
 
  if (fixp->fx_r_type == BFD_RELOC_VTABLE_INHERIT
      || fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
    reloc->address = fixp->fx_offset;
 
  reloc->addend = fixp->fx_offset;
 
  return reloc;
}
 
void
md_assemble (char *str)
{
  struct avr_opcodes_s *opcode;
  char op[11];
 
  str = skip_space (extract_word (str, op, sizeof (op)));
 
  if (!op[0])
    as_bad (_("can't find opcode "));
 
  opcode = (struct avr_opcodes_s *) hash_find (avr_hash, op);
 
  if (opcode == NULL)
    {
      as_bad (_("unknown opcode `%s'"), op);
      return;
    }
 
  /* Special case for opcodes with optional operands (lpm, elpm) -
     version with operands exists in avr_opcodes[] in the next entry.  */
 
  if (*str && *opcode->constraints == '?')
    ++opcode;
 
  if (!avr_opt.all_opcodes && (opcode->isa & avr_mcu->isa) != opcode->isa)
    as_bad (_("illegal opcode %s for mcu %s"), opcode->name, avr_mcu->name);
 
  /* We used to set input_line_pointer to the result of get_operands,
     but that is wrong.  Our caller assumes we don't change it.  */
  {
    char *t = input_line_pointer;
 
    avr_operands (opcode, &str);
    if (*skip_space (str))
      as_bad (_("garbage at end of line"));
    input_line_pointer = t;
  }
}
 
/* Flag to pass `pm' mode between `avr_parse_cons_expression' and
   `avr_cons_fix_new'.  */
static int exp_mod_pm = 0;
 
/* Parse special CONS expression: pm (expression)
   or alternatively: gs (expression).
   These are used for addressing program memory.
   Relocation: BFD_RELOC_AVR_16_PM.  */
 
void
avr_parse_cons_expression (expressionS *exp, int nbytes)
{
  char *tmp;
 
  exp_mod_pm = 0;
 
  tmp = input_line_pointer = skip_space (input_line_pointer);
 
  if (nbytes == 2)
    {
      char *pm_name1 = "pm";
      char *pm_name2 = "gs";
      int len = strlen (pm_name1);
      /* len must be the same for both pm identifiers.  */
 
      if (strncasecmp (input_line_pointer, pm_name1, len) == 0
          || strncasecmp (input_line_pointer, pm_name2, len) == 0)
        {
          input_line_pointer = skip_space (input_line_pointer + len);
 
          if (*input_line_pointer == '(')
            {
              input_line_pointer = skip_space (input_line_pointer + 1);
              exp_mod_pm = 1;
              expression (exp);
 
              if (*input_line_pointer == ')')
                ++input_line_pointer;
              else
                {
                  as_bad (_("`)' required"));
                  exp_mod_pm = 0;
                }
 
              return;
            }
 
          input_line_pointer = tmp;
        }
    }
 
  expression (exp);
}
 
void
avr_cons_fix_new (fragS *frag,
                  int where,
                  int nbytes,
                  expressionS *exp)
{
  if (exp_mod_pm == 0)
    {
      if (nbytes == 2)
        fix_new_exp (frag, where, nbytes, exp, FALSE, BFD_RELOC_16);
      else if (nbytes == 4)
        fix_new_exp (frag, where, nbytes, exp, FALSE, BFD_RELOC_32);
      else
        as_bad (_("illegal %srelocation size: %d"), "", nbytes);
    }
  else
    {
      if (nbytes == 2)
        fix_new_exp (frag, where, nbytes, exp, FALSE, BFD_RELOC_AVR_16_PM);
      else
        as_bad (_("illegal %srelocation size: %d"), "`pm' ", nbytes);
      exp_mod_pm = 0;
    }
}
Browse

Tools

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [binutils-2.18.50/] [gas/] [config/] [tc-avr.c] - Blame information for rev 38

Line No.	Rev	Author	Line
1	38	julius	`/* tc-avr.c -- Assembler code for the ATMEL AVR`
2
3			`Copyright 1999, 2000, 2001, 2002, 2004, 2005, 2006, 2007, 2008`
4			`Free Software Foundation, Inc.`
5			`Contributed by Denis Chertykov <denisc@overta.ru>`
6
7			`This file is part of GAS, the GNU Assembler.`
8
9			`GAS is free software; you can redistribute it and/or modify`
10			`it under the terms of the GNU General Public License as published by`
11			`the Free Software Foundation; either version 3, or (at your option)`
12			`any later version.`
13
14			`GAS is distributed in the hope that it will be useful,`
15			`but WITHOUT ANY WARRANTY; without even the implied warranty of`
16			`MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
17			`GNU General Public License for more details.`
18
19			`You should have received a copy of the GNU General Public License`
20			`along with GAS; see the file COPYING. If not, write to`
21			`the Free Software Foundation, 51 Franklin Street - Fifth Floor,`
22			`Boston, MA 02110-1301, USA. */`
23
24			`#include "as.h"`
25			`#include "safe-ctype.h"`
26			`#include "subsegs.h"`
27
28			`struct avr_opcodes_s`
29			`{`
30			`char * name;`
31			`char * constraints;`
32			`int insn_size; /* In words. */`
33			`int isa;`
34			`unsigned int bin_opcode;`
35			`};`
36
37			`#define AVR_INSN(NAME, CONSTR, OPCODE, SIZE, ISA, BIN) \`
38			`{#NAME, CONSTR, SIZE, ISA, BIN},`
39
40			`struct avr_opcodes_s avr_opcodes[] =`