OpenCores
URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [gnu-src/] [binutils-2.18.50/] [gas/] [dwarf2dbg.c] - Blame information for rev 293

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 38 julius
/* dwarf2dbg.c - DWARF2 debug support
2
   Copyright 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
3
   Free Software Foundation, Inc.
4
   Contributed by David Mosberger-Tang <davidm@hpl.hp.com>
5
 
6
   This file is part of GAS, the GNU Assembler.
7
 
8
   GAS is free software; you can redistribute it and/or modify
9
   it under the terms of the GNU General Public License as published by
10
   the Free Software Foundation; either version 3, or (at your option)
11
   any later version.
12
 
13
   GAS is distributed in the hope that it will be useful,
14
   but WITHOUT ANY WARRANTY; without even the implied warranty of
15
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16
   GNU General Public License for more details.
17
 
18
   You should have received a copy of the GNU General Public License
19
   along with GAS; see the file COPYING.  If not, write to the Free
20
   Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
21
   02110-1301, USA.  */
22
 
23
/* Logical line numbers can be controlled by the compiler via the
24
   following directives:
25
 
26
        .file FILENO "file.c"
27
        .loc  FILENO LINENO [COLUMN] [basic_block] [prologue_end] \
28
              [epilogue_begin] [is_stmt VALUE] [isa VALUE]
29
*/
30
 
31
#include "as.h"
32
#include "safe-ctype.h"
33
 
34
#ifdef HAVE_LIMITS_H
35
#include <limits.h>
36
#else
37
#ifdef HAVE_SYS_PARAM_H
38
#include <sys/param.h>
39
#endif
40
#ifndef INT_MAX
41
#define INT_MAX (int) (((unsigned) (-1)) >> 1)
42
#endif
43
#endif
44
 
45
#include "dwarf2dbg.h"
46
#include <filenames.h>
47
 
48
#ifdef HAVE_DOS_BASED_FILE_SYSTEM
49
/* We need to decide which character to use as a directory separator.
50
   Just because HAVE_DOS_BASED_FILE_SYSTEM is defined, it does not
51
   necessarily mean that the backslash character is the one to use.
52
   Some environments, eg Cygwin, can support both naming conventions.
53
   So we use the heuristic that we only need to use the backslash if
54
   the path is an absolute path starting with a DOS style drive
55
   selector.  eg C: or D:  */
56
# define INSERT_DIR_SEPARATOR(string, offset) \
57
  do \
58
    { \
59
      if (offset > 1 \
60
          && string[0] != 0 \
61
          && string[1] == ':') \
62
       string [offset] = '\\'; \
63
      else \
64
       string [offset] = '/'; \
65
    } \
66
  while (0)
67
#else
68
# define INSERT_DIR_SEPARATOR(string, offset) string[offset] = '/'
69
#endif
70
 
71
#ifndef DWARF2_FORMAT
72
# define DWARF2_FORMAT() dwarf2_format_32bit
73
#endif
74
 
75
#ifndef DWARF2_ADDR_SIZE
76
# define DWARF2_ADDR_SIZE(bfd) (bfd_arch_bits_per_address (bfd) / 8)
77
#endif
78
 
79
#include "subsegs.h"
80
 
81
#include "elf/dwarf2.h"
82
 
83
/* Since we can't generate the prolog until the body is complete, we
84
   use three different subsegments for .debug_line: one holding the
85
   prolog, one for the directory and filename info, and one for the
86
   body ("statement program").  */
87
#define DL_PROLOG       0
88
#define DL_FILES        1
89
#define DL_BODY         2
90
 
91
/* If linker relaxation might change offsets in the code, the DWARF special
92
   opcodes and variable-length operands cannot be used.  If this macro is
93
   nonzero, use the DW_LNS_fixed_advance_pc opcode instead.  */
94
#ifndef DWARF2_USE_FIXED_ADVANCE_PC
95
# define DWARF2_USE_FIXED_ADVANCE_PC    0
96
#endif
97
 
98
/* First special line opcde - leave room for the standard opcodes.
99
   Note: If you want to change this, you'll have to update the
100
   "standard_opcode_lengths" table that is emitted below in
101
   out_debug_line().  */
102
#define DWARF2_LINE_OPCODE_BASE         13
103
 
104
#ifndef DWARF2_LINE_BASE
105
  /* Minimum line offset in a special line info. opcode.  This value
106
     was chosen to give a reasonable range of values.  */
107
# define DWARF2_LINE_BASE               -5
108
#endif
109
 
110
/* Range of line offsets in a special line info. opcode.  */
111
#ifndef DWARF2_LINE_RANGE
112
# define DWARF2_LINE_RANGE              14
113
#endif
114
 
115
#ifndef DWARF2_LINE_MIN_INSN_LENGTH
116
  /* Define the architecture-dependent minimum instruction length (in
117
     bytes).  This value should be rather too small than too big.  */
118
# define DWARF2_LINE_MIN_INSN_LENGTH    1
119
#endif
120
 
121
/* Flag that indicates the initial value of the is_stmt_start flag.  */
122
#define DWARF2_LINE_DEFAULT_IS_STMT     1
123
 
124
/* Given a special op, return the line skip amount.  */
125
#define SPECIAL_LINE(op) \
126
        (((op) - DWARF2_LINE_OPCODE_BASE)%DWARF2_LINE_RANGE + DWARF2_LINE_BASE)
127
 
128
/* Given a special op, return the address skip amount (in units of
129
   DWARF2_LINE_MIN_INSN_LENGTH.  */
130
#define SPECIAL_ADDR(op) (((op) - DWARF2_LINE_OPCODE_BASE)/DWARF2_LINE_RANGE)
131
 
132
/* The maximum address skip amount that can be encoded with a special op.  */
133
#define MAX_SPECIAL_ADDR_DELTA          SPECIAL_ADDR(255)
134
 
135
struct line_entry {
136
  struct line_entry *next;
137
  symbolS *label;
138
  struct dwarf2_line_info loc;
139
};
140
 
141
struct line_subseg {
142
  struct line_subseg *next;
143
  subsegT subseg;
144
  struct line_entry *head;
145
  struct line_entry **ptail;
146
};
147
 
148
struct line_seg {
149
  struct line_seg *next;
150
  segT seg;
151
  struct line_subseg *head;
152
  symbolS *text_start;
153
  symbolS *text_end;
154
};
155
 
156
/* Collects data for all line table entries during assembly.  */
157
static struct line_seg *all_segs;
158
 
159
struct file_entry {
160
  const char *filename;
161
  unsigned int dir;
162
};
163
 
164
/* Table of files used by .debug_line.  */
165
static struct file_entry *files;
166
static unsigned int files_in_use;
167
static unsigned int files_allocated;
168
 
169
/* Table of directories used by .debug_line.  */
170
static char **dirs;
171
static unsigned int dirs_in_use;
172
static unsigned int dirs_allocated;
173
 
174
/* TRUE when we've seen a .loc directive recently.  Used to avoid
175
   doing work when there's nothing to do.  */
176
bfd_boolean dwarf2_loc_directive_seen;
177
 
178
/* TRUE when we're supposed to set the basic block mark whenever a
179
   label is seen.  */
180
bfd_boolean dwarf2_loc_mark_labels;
181
 
182
/* Current location as indicated by the most recent .loc directive.  */
183
static struct dwarf2_line_info current = {
184
  1, 1, 0, 0,
185
  DWARF2_LINE_DEFAULT_IS_STMT ? DWARF2_FLAG_IS_STMT : 0
186
};
187
 
188
/* The size of an address on the target.  */
189
static unsigned int sizeof_address;
190
 
191
static struct line_subseg *get_line_subseg (segT, subsegT);
192
static unsigned int get_filenum (const char *, unsigned int);
193
static struct frag *first_frag_for_seg (segT);
194
static struct frag *last_frag_for_seg (segT);
195
static void out_byte (int);
196
static void out_opcode (int);
197
static void out_two (int);
198
static void out_four (int);
199
static void out_abbrev (int, int);
200
static void out_uleb128 (addressT);
201
static offsetT get_frag_fix (fragS *, segT);
202
static void out_set_addr (symbolS *);
203
static int size_inc_line_addr (int, addressT);
204
static void emit_inc_line_addr (int, addressT, char *, int);
205
static int size_fixed_inc_line_addr (int, addressT);
206
static void emit_fixed_inc_line_addr (int, addressT, fragS *, char *, int);
207
static void out_inc_line_addr (int, addressT);
208
static void relax_inc_line_addr (int, symbolS *, symbolS *);
209
static void process_entries (segT, struct line_entry *);
210
static void out_file_list (void);
211
static void out_debug_line (segT);
212
static void out_debug_aranges (segT, segT);
213
static void out_debug_abbrev (segT);
214
 
215
#ifndef TC_DWARF2_EMIT_OFFSET
216
#define TC_DWARF2_EMIT_OFFSET  generic_dwarf2_emit_offset
217
 
218
/* Create an offset to .dwarf2_*.  */
219
 
220
static void
221
generic_dwarf2_emit_offset (symbolS *symbol, unsigned int size)
222
{
223
  expressionS expr;
224
 
225
  expr.X_op = O_symbol;
226
  expr.X_add_symbol = symbol;
227
  expr.X_add_number = 0;
228
  emit_expr (&expr, size);
229
}
230
#endif
231
 
232
/* Find or create an entry for SEG+SUBSEG in ALL_SEGS.  */
233
 
234
static struct line_subseg *
235
get_line_subseg (segT seg, subsegT subseg)
236
{
237
  static segT last_seg;
238
  static subsegT last_subseg;
239
  static struct line_subseg *last_line_subseg;
240
 
241
  struct line_seg **ps, *s;
242
  struct line_subseg **pss, *ss;
243
 
244
  if (seg == last_seg && subseg == last_subseg)
245
    return last_line_subseg;
246
 
247
  for (ps = &all_segs; (s = *ps) != NULL; ps = &s->next)
248
    if (s->seg == seg)
249
      goto found_seg;
250
 
251
  s = (struct line_seg *) xmalloc (sizeof (*s));
252
  s->next = NULL;
253
  s->seg = seg;
254
  s->head = NULL;
255
  *ps = s;
256
 
257
 found_seg:
258
  for (pss = &s->head; (ss = *pss) != NULL ; pss = &ss->next)
259
    {
260
      if (ss->subseg == subseg)
261
        goto found_subseg;
262
      if (ss->subseg > subseg)
263
        break;
264
    }
265
 
266
  ss = (struct line_subseg *) xmalloc (sizeof (*ss));
267
  ss->next = *pss;
268
  ss->subseg = subseg;
269
  ss->head = NULL;
270
  ss->ptail = &ss->head;
271
  *pss = ss;
272
 
273
 found_subseg:
274
  last_seg = seg;
275
  last_subseg = subseg;
276
  last_line_subseg = ss;
277
 
278
  return ss;
279
}
280
 
281
/* Record an entry for LOC occurring at LABEL.  */
282
 
283
static void
284
dwarf2_gen_line_info_1 (symbolS *label, struct dwarf2_line_info *loc)
285
{
286
  struct line_subseg *ss;
287
  struct line_entry *e;
288
 
289
  e = (struct line_entry *) xmalloc (sizeof (*e));
290
  e->next = NULL;
291
  e->label = label;
292
  e->loc = *loc;
293
 
294
  ss = get_line_subseg (now_seg, now_subseg);
295
  *ss->ptail = e;
296
  ss->ptail = &e->next;
297
}
298
 
299
/* Record an entry for LOC occurring at OFS within the current fragment.  */
300
 
301
void
302
dwarf2_gen_line_info (addressT ofs, struct dwarf2_line_info *loc)
303
{
304
  static unsigned int line = -1;
305
  static unsigned int filenum = -1;
306
 
307
  symbolS *sym;
308
 
309
  /* Early out for as-yet incomplete location information.  */
310
  if (loc->filenum == 0 || loc->line == 0)
311
    return;
312
 
313
  /* Don't emit sequences of line symbols for the same line when the
314
     symbols apply to assembler code.  It is necessary to emit
315
     duplicate line symbols when a compiler asks for them, because GDB
316
     uses them to determine the end of the prologue.  */
317
  if (debug_type == DEBUG_DWARF2
318
      && line == loc->line && filenum == loc->filenum)
319
    return;
320
 
321
  line = loc->line;
322
  filenum = loc->filenum;
323
 
324
  sym = symbol_temp_new (now_seg, ofs, frag_now);
325
  dwarf2_gen_line_info_1 (sym, loc);
326
}
327
 
328
/* Returns the current source information.  If .file directives have
329
   been encountered, the info for the corresponding source file is
330
   returned.  Otherwise, the info for the assembly source file is
331
   returned.  */
332
 
333
void
334
dwarf2_where (struct dwarf2_line_info *line)
335
{
336
  if (debug_type == DEBUG_DWARF2)
337
    {
338
      char *filename;
339
      as_where (&filename, &line->line);
340
      line->filenum = get_filenum (filename, 0);
341
      line->column = 0;
342
      line->flags = DWARF2_FLAG_IS_STMT;
343
      line->isa = current.isa;
344
    }
345
  else
346
    *line = current;
347
}
348
 
349
/* A hook to allow the target backend to inform the line number state
350
   machine of isa changes when assembler debug info is enabled.  */
351
 
352
void
353
dwarf2_set_isa (unsigned int isa)
354
{
355
  current.isa = isa;
356
}
357
 
358
/* Called for each machine instruction, or relatively atomic group of
359
   machine instructions (ie built-in macro).  The instruction or group
360
   is SIZE bytes in length.  If dwarf2 line number generation is called
361
   for, emit a line statement appropriately.  */
362
 
363
void
364
dwarf2_emit_insn (int size)
365
{
366
  struct dwarf2_line_info loc;
367
 
368
  if (!dwarf2_loc_directive_seen && debug_type != DEBUG_DWARF2)
369
    return;
370
 
371
  dwarf2_where (&loc);
372
 
373
  dwarf2_gen_line_info (frag_now_fix () - size, &loc);
374
  dwarf2_consume_line_info ();
375
}
376
 
377
/* Called after the current line information has been either used with
378
   dwarf2_gen_line_info or saved with a machine instruction for later use.
379
   This resets the state of the line number information to reflect that
380
   it has been used.  */
381
 
382
void
383
dwarf2_consume_line_info (void)
384
{
385
  /* Unless we generate DWARF2 debugging information for each
386
     assembler line, we only emit one line symbol for one LOC.  */
387
  dwarf2_loc_directive_seen = FALSE;
388
 
389
  current.flags &= ~(DWARF2_FLAG_BASIC_BLOCK
390
                     | DWARF2_FLAG_PROLOGUE_END
391
                     | DWARF2_FLAG_EPILOGUE_BEGIN);
392
}
393
 
394
/* Called for each (preferably code) label.  If dwarf2_loc_mark_labels
395
   is enabled, emit a basic block marker.  */
396
 
397
void
398
dwarf2_emit_label (symbolS *label)
399
{
400
  struct dwarf2_line_info loc;
401
 
402
  if (!dwarf2_loc_mark_labels)
403
    return;
404
  if (S_GET_SEGMENT (label) != now_seg)
405
    return;
406
  if (!(bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE))
407
    return;
408
  if (files_in_use == 0 && debug_type != DEBUG_DWARF2)
409
    return;
410
 
411
  dwarf2_where (&loc);
412
 
413
  loc.flags |= DWARF2_FLAG_BASIC_BLOCK;
414
 
415
  dwarf2_gen_line_info_1 (label, &loc);
416
  dwarf2_consume_line_info ();
417
}
418
 
419
/* Get a .debug_line file number for FILENAME.  If NUM is nonzero,
420
   allocate it on that file table slot, otherwise return the first
421
   empty one.  */
422
 
423
static unsigned int
424
get_filenum (const char *filename, unsigned int num)
425
{
426
  static unsigned int last_used, last_used_dir_len;
427
  const char *file;
428
  size_t dir_len;
429
  unsigned int i, dir;
430
 
431
  if (num == 0 && last_used)
432
    {
433
      if (! files[last_used].dir
434
          && strcmp (filename, files[last_used].filename) == 0)
435
        return last_used;
436
      if (files[last_used].dir
437
          && strncmp (filename, dirs[files[last_used].dir],
438
                      last_used_dir_len) == 0
439
          && IS_DIR_SEPARATOR (filename [last_used_dir_len])
440
          && strcmp (filename + last_used_dir_len + 1,
441
                     files[last_used].filename) == 0)
442
        return last_used;
443
    }
444
 
445
  file = lbasename (filename);
446
  /* Don't make empty string from / or A: from A:/ .  */
447
#ifdef HAVE_DOS_BASED_FILE_SYSTEM
448
  if (file <= filename + 3)
449
    file = filename;
450
#else
451
  if (file == filename + 1)
452
    file = filename;
453
#endif
454
  dir_len = file - filename;
455
 
456
  dir = 0;
457
  if (dir_len)
458
    {
459
      --dir_len;
460
      for (dir = 1; dir < dirs_in_use; ++dir)
461
        if (strncmp (filename, dirs[dir], dir_len) == 0
462
            && dirs[dir][dir_len] == '\0')
463
          break;
464
 
465
      if (dir >= dirs_in_use)
466
        {
467
          if (dir >= dirs_allocated)
468
            {
469
              dirs_allocated = dir + 32;
470
              dirs = (char **)
471
                     xrealloc (dirs, (dir + 32) * sizeof (const char *));
472
            }
473
 
474
          dirs[dir] = xmalloc (dir_len + 1);
475
          memcpy (dirs[dir], filename, dir_len);
476
          dirs[dir][dir_len] = '\0';
477
          dirs_in_use = dir + 1;
478
        }
479
    }
480
 
481
  if (num == 0)
482
    {
483
      for (i = 1; i < files_in_use; ++i)
484
        if (files[i].dir == dir
485
            && files[i].filename
486
            && strcmp (file, files[i].filename) == 0)
487
          {
488
            last_used = i;
489
            last_used_dir_len = dir_len;
490
            return i;
491
          }
492
    }
493
  else
494
    i = num;
495
 
496
  if (i >= files_allocated)
497
    {
498
      unsigned int old = files_allocated;
499
 
500
      files_allocated = i + 32;
501
      files = (struct file_entry *)
502
        xrealloc (files, (i + 32) * sizeof (struct file_entry));
503
 
504
      memset (files + old, 0, (i + 32 - old) * sizeof (struct file_entry));
505
    }
506
 
507
  files[i].filename = num ? file : xstrdup (file);
508
  files[i].dir = dir;
509
  if (files_in_use < i + 1)
510
    files_in_use = i + 1;
511
  last_used = i;
512
  last_used_dir_len = dir_len;
513
 
514
  return i;
515
}
516
 
517
/* Handle two forms of .file directive:
518
   - Pass .file "source.c" to s_app_file
519
   - Handle .file 1 "source.c" by adding an entry to the DWARF-2 file table
520
 
521
   If an entry is added to the file table, return a pointer to the filename. */
522
 
523
char *
524
dwarf2_directive_file (int dummy ATTRIBUTE_UNUSED)
525
{
526
  offsetT num;
527
  char *filename;
528
  int filename_len;
529
 
530
  /* Continue to accept a bare string and pass it off.  */
531
  SKIP_WHITESPACE ();
532
  if (*input_line_pointer == '"')
533
    {
534
      s_app_file (0);
535
      return NULL;
536
    }
537
 
538
  num = get_absolute_expression ();
539
  filename = demand_copy_C_string (&filename_len);
540
  if (filename == NULL)
541
    return NULL;
542
  demand_empty_rest_of_line ();
543
 
544
  if (num < 1)
545
    {
546
      as_bad (_("file number less than one"));
547
      return NULL;
548
    }
549
 
550
  if (num < (int) files_in_use && files[num].filename != 0)
551
    {
552
      as_bad (_("file number %ld already allocated"), (long) num);
553
      return NULL;
554
    }
555
 
556
  get_filenum (filename, num);
557
 
558
  return filename;
559
}
560
 
561
void
562
dwarf2_directive_loc (int dummy ATTRIBUTE_UNUSED)
563
{
564
  offsetT filenum, line;
565
 
566
  /* If we see two .loc directives in a row, force the first one to be
567
     output now.  */
568
  if (dwarf2_loc_directive_seen && debug_type != DEBUG_DWARF2)
569
    dwarf2_emit_insn (0);
570
 
571
  filenum = get_absolute_expression ();
572
  SKIP_WHITESPACE ();
573
  line = get_absolute_expression ();
574
 
575
  if (filenum < 1)
576
    {
577
      as_bad (_("file number less than one"));
578
      return;
579
    }
580
  if (filenum >= (int) files_in_use || files[filenum].filename == 0)
581
    {
582
      as_bad (_("unassigned file number %ld"), (long) filenum);
583
      return;
584
    }
585
 
586
  current.filenum = filenum;
587
  current.line = line;
588
 
589
#ifndef NO_LISTING
590
  if (listing)
591
    {
592
      if (files[filenum].dir)
593
        {
594
          size_t dir_len = strlen (dirs[files[filenum].dir]);
595
          size_t file_len = strlen (files[filenum].filename);
596
          char *cp = (char *) alloca (dir_len + 1 + file_len + 1);
597
 
598
          memcpy (cp, dirs[files[filenum].dir], dir_len);
599
          INSERT_DIR_SEPARATOR (cp, dir_len);
600
          memcpy (cp + dir_len + 1, files[filenum].filename, file_len);
601
          cp[dir_len + file_len + 1] = '\0';
602
          listing_source_file (cp);
603
        }
604
      else
605
        listing_source_file (files[filenum].filename);
606
      listing_source_line (line);
607
    }
608
#endif
609
 
610
  SKIP_WHITESPACE ();
611
  if (ISDIGIT (*input_line_pointer))
612
    {
613
      current.column = get_absolute_expression ();
614
      SKIP_WHITESPACE ();
615
    }
616
 
617
  while (ISALPHA (*input_line_pointer))
618
    {
619
      char *p, c;
620
      offsetT value;
621
 
622
      p = input_line_pointer;
623
      c = get_symbol_end ();
624
 
625
      if (strcmp (p, "basic_block") == 0)
626
        {
627
          current.flags |= DWARF2_FLAG_BASIC_BLOCK;
628
          *input_line_pointer = c;
629
        }
630
      else if (strcmp (p, "prologue_end") == 0)
631
        {
632
          current.flags |= DWARF2_FLAG_PROLOGUE_END;
633
          *input_line_pointer = c;
634
        }
635
      else if (strcmp (p, "epilogue_begin") == 0)
636
        {
637
          current.flags |= DWARF2_FLAG_EPILOGUE_BEGIN;
638
          *input_line_pointer = c;
639
        }
640
      else if (strcmp (p, "is_stmt") == 0)
641
        {
642
          *input_line_pointer = c;
643
          value = get_absolute_expression ();
644
          if (value == 0)
645
            current.flags &= ~DWARF2_FLAG_IS_STMT;
646
          else if (value == 1)
647
            current.flags |= DWARF2_FLAG_IS_STMT;
648
          else
649
            {
650
              as_bad (_("is_stmt value not 0 or 1"));
651
              return;
652
            }
653
        }
654
      else if (strcmp (p, "isa") == 0)
655
        {
656
          *input_line_pointer = c;
657
          value = get_absolute_expression ();
658
          if (value >= 0)
659
            current.isa = value;
660
          else
661
            {
662
              as_bad (_("isa number less than zero"));
663
              return;
664
            }
665
        }
666
      else
667
        {
668
          as_bad (_("unknown .loc sub-directive `%s'"), p);
669
          *input_line_pointer = c;
670
          return;
671
        }
672
 
673
      SKIP_WHITESPACE ();
674
    }
675
 
676
  demand_empty_rest_of_line ();
677
  dwarf2_loc_directive_seen = TRUE;
678
}
679
 
680
void
681
dwarf2_directive_loc_mark_labels (int dummy ATTRIBUTE_UNUSED)
682
{
683
  offsetT value = get_absolute_expression ();
684
 
685
  if (value != 0 && value != 1)
686
    {
687
      as_bad (_("expected 0 or 1"));
688
      ignore_rest_of_line ();
689
    }
690
  else
691
    {
692
      dwarf2_loc_mark_labels = value != 0;
693
      demand_empty_rest_of_line ();
694
    }
695
}
696
 
697
static struct frag *
698
first_frag_for_seg (segT seg)
699
{
700
  return seg_info (seg)->frchainP->frch_root;
701
}
702
 
703
static struct frag *
704
last_frag_for_seg (segT seg)
705
{
706
  frchainS *f = seg_info (seg)->frchainP;
707
 
708
  while (f->frch_next != NULL)
709
    f = f->frch_next;
710
 
711
  return f->frch_last;
712
}
713
 
714
/* Emit a single byte into the current segment.  */
715
 
716
static inline void
717
out_byte (int byte)
718
{
719
  FRAG_APPEND_1_CHAR (byte);
720
}
721
 
722
/* Emit a statement program opcode into the current segment.  */
723
 
724
static inline void
725
out_opcode (int opc)
726
{
727
  out_byte (opc);
728
}
729
 
730
/* Emit a two-byte word into the current segment.  */
731
 
732
static inline void
733
out_two (int data)
734
{
735
  md_number_to_chars (frag_more (2), data, 2);
736
}
737
 
738
/* Emit a four byte word into the current segment.  */
739
 
740
static inline void
741
out_four (int data)
742
{
743
  md_number_to_chars (frag_more (4), data, 4);
744
}
745
 
746
/* Emit an unsigned "little-endian base 128" number.  */
747
 
748
static void
749
out_uleb128 (addressT value)
750
{
751
  output_leb128 (frag_more (sizeof_leb128 (value, 0)), value, 0);
752
}
753
 
754
/* Emit a tuple for .debug_abbrev.  */
755
 
756
static inline void
757
out_abbrev (int name, int form)
758
{
759
  out_uleb128 (name);
760
  out_uleb128 (form);
761
}
762
 
763
/* Get the size of a fragment.  */
764
 
765
static offsetT
766
get_frag_fix (fragS *frag, segT seg)
767
{
768
  frchainS *fr;
769
 
770
  if (frag->fr_next)
771
    return frag->fr_fix;
772
 
773
  /* If a fragment is the last in the chain, special measures must be
774
     taken to find its size before relaxation, since it may be pending
775
     on some subsegment chain.  */
776
  for (fr = seg_info (seg)->frchainP; fr; fr = fr->frch_next)
777
    if (fr->frch_last == frag)
778
      return (char *) obstack_next_free (&fr->frch_obstack) - frag->fr_literal;
779
 
780
  abort ();
781
}
782
 
783
/* Set an absolute address (may result in a relocation entry).  */
784
 
785
static void
786
out_set_addr (symbolS *sym)
787
{
788
  expressionS expr;
789
 
790
  out_opcode (DW_LNS_extended_op);
791
  out_uleb128 (sizeof_address + 1);
792
 
793
  out_opcode (DW_LNE_set_address);
794
  expr.X_op = O_symbol;
795
  expr.X_add_symbol = sym;
796
  expr.X_add_number = 0;
797
  emit_expr (&expr, sizeof_address);
798
}
799
 
800
#if DWARF2_LINE_MIN_INSN_LENGTH > 1
801
static void scale_addr_delta (addressT *);
802
 
803
static void
804
scale_addr_delta (addressT *addr_delta)
805
{
806
  static int printed_this = 0;
807
  if (*addr_delta % DWARF2_LINE_MIN_INSN_LENGTH != 0)
808
    {
809
      if (!printed_this)
810
        as_bad("unaligned opcodes detected in executable segment");
811
      printed_this = 1;
812
    }
813
  *addr_delta /= DWARF2_LINE_MIN_INSN_LENGTH;
814
}
815
#else
816
#define scale_addr_delta(A)
817
#endif
818
 
819
/* Encode a pair of line and address skips as efficiently as possible.
820
   Note that the line skip is signed, whereas the address skip is unsigned.
821
 
822
   The following two routines *must* be kept in sync.  This is
823
   enforced by making emit_inc_line_addr abort if we do not emit
824
   exactly the expected number of bytes.  */
825
 
826
static int
827
size_inc_line_addr (int line_delta, addressT addr_delta)
828
{
829
  unsigned int tmp, opcode;
830
  int len = 0;
831
 
832
  /* Scale the address delta by the minimum instruction length.  */
833
  scale_addr_delta (&addr_delta);
834
 
835
  /* INT_MAX is a signal that this is actually a DW_LNE_end_sequence.
836
     We cannot use special opcodes here, since we want the end_sequence
837
     to emit the matrix entry.  */
838
  if (line_delta == INT_MAX)
839
    {
840
      if (addr_delta == MAX_SPECIAL_ADDR_DELTA)
841
        len = 1;
842
      else
843
        len = 1 + sizeof_leb128 (addr_delta, 0);
844
      return len + 3;
845
    }
846
 
847
  /* Bias the line delta by the base.  */
848
  tmp = line_delta - DWARF2_LINE_BASE;
849
 
850
  /* If the line increment is out of range of a special opcode, we
851
     must encode it with DW_LNS_advance_line.  */
852
  if (tmp >= DWARF2_LINE_RANGE)
853
    {
854
      len = 1 + sizeof_leb128 (line_delta, 1);
855
      line_delta = 0;
856
      tmp = 0 - DWARF2_LINE_BASE;
857
    }
858
 
859
  /* Bias the opcode by the special opcode base.  */
860
  tmp += DWARF2_LINE_OPCODE_BASE;
861
 
862
  /* Avoid overflow when addr_delta is large.  */
863
  if (addr_delta < 256 + MAX_SPECIAL_ADDR_DELTA)
864
    {
865
      /* Try using a special opcode.  */
866
      opcode = tmp + addr_delta * DWARF2_LINE_RANGE;
867
      if (opcode <= 255)
868
        return len + 1;
869
 
870
      /* Try using DW_LNS_const_add_pc followed by special op.  */
871
      opcode = tmp + (addr_delta - MAX_SPECIAL_ADDR_DELTA) * DWARF2_LINE_RANGE;
872
      if (opcode <= 255)
873
        return len + 2;
874
    }
875
 
876
  /* Otherwise use DW_LNS_advance_pc.  */
877
  len += 1 + sizeof_leb128 (addr_delta, 0);
878
 
879
  /* DW_LNS_copy or special opcode.  */
880
  len += 1;
881
 
882
  return len;
883
}
884
 
885
static void
886
emit_inc_line_addr (int line_delta, addressT addr_delta, char *p, int len)
887
{
888
  unsigned int tmp, opcode;
889
  int need_copy = 0;
890
  char *end = p + len;
891
 
892
  /* Line number sequences cannot go backward in addresses.  This means
893
     we've incorrectly ordered the statements in the sequence.  */
894
  assert ((offsetT) addr_delta >= 0);
895
 
896
  /* Scale the address delta by the minimum instruction length.  */
897
  scale_addr_delta (&addr_delta);
898
 
899
  /* INT_MAX is a signal that this is actually a DW_LNE_end_sequence.
900
     We cannot use special opcodes here, since we want the end_sequence
901
     to emit the matrix entry.  */
902
  if (line_delta == INT_MAX)
903
    {
904
      if (addr_delta == MAX_SPECIAL_ADDR_DELTA)
905
        *p++ = DW_LNS_const_add_pc;
906
      else
907
        {
908
          *p++ = DW_LNS_advance_pc;
909
          p += output_leb128 (p, addr_delta, 0);
910
        }
911
 
912
      *p++ = DW_LNS_extended_op;
913
      *p++ = 1;
914
      *p++ = DW_LNE_end_sequence;
915
      goto done;
916
    }
917
 
918
  /* Bias the line delta by the base.  */
919
  tmp = line_delta - DWARF2_LINE_BASE;
920
 
921
  /* If the line increment is out of range of a special opcode, we
922
     must encode it with DW_LNS_advance_line.  */
923
  if (tmp >= DWARF2_LINE_RANGE)
924
    {
925
      *p++ = DW_LNS_advance_line;
926
      p += output_leb128 (p, line_delta, 1);
927
 
928
      line_delta = 0;
929
      tmp = 0 - DWARF2_LINE_BASE;
930
      need_copy = 1;
931
    }
932
 
933
  /* Prettier, I think, to use DW_LNS_copy instead of a "line +0, addr +0"
934
     special opcode.  */
935
  if (line_delta == 0 && addr_delta == 0)
936
    {
937
      *p++ = DW_LNS_copy;
938
      goto done;
939
    }
940
 
941
  /* Bias the opcode by the special opcode base.  */
942
  tmp += DWARF2_LINE_OPCODE_BASE;
943
 
944
  /* Avoid overflow when addr_delta is large.  */
945
  if (addr_delta < 256 + MAX_SPECIAL_ADDR_DELTA)
946
    {
947
      /* Try using a special opcode.  */
948
      opcode = tmp + addr_delta * DWARF2_LINE_RANGE;
949
      if (opcode <= 255)
950
        {
951
          *p++ = opcode;
952
          goto done;
953
        }
954
 
955
      /* Try using DW_LNS_const_add_pc followed by special op.  */
956
      opcode = tmp + (addr_delta - MAX_SPECIAL_ADDR_DELTA) * DWARF2_LINE_RANGE;
957
      if (opcode <= 255)
958
        {
959
          *p++ = DW_LNS_const_add_pc;
960
          *p++ = opcode;
961
          goto done;
962
        }
963
    }
964
 
965
  /* Otherwise use DW_LNS_advance_pc.  */
966
  *p++ = DW_LNS_advance_pc;
967
  p += output_leb128 (p, addr_delta, 0);
968
 
969
  if (need_copy)
970
    *p++ = DW_LNS_copy;
971
  else
972
    *p++ = tmp;
973
 
974
 done:
975
  assert (p == end);
976
}
977
 
978
/* Handy routine to combine calls to the above two routines.  */
979
 
980
static void
981
out_inc_line_addr (int line_delta, addressT addr_delta)
982
{
983
  int len = size_inc_line_addr (line_delta, addr_delta);
984
  emit_inc_line_addr (line_delta, addr_delta, frag_more (len), len);
985
}
986
 
987
/* Write out an alternative form of line and address skips using
988
   DW_LNS_fixed_advance_pc opcodes.  This uses more space than the default
989
   line and address information, but it is required if linker relaxation
990
   could change the code offsets.  The following two routines *must* be
991
   kept in sync.  */
992
 
993
static int
994
size_fixed_inc_line_addr (int line_delta, addressT addr_delta)
995
{
996
  int len = 0;
997
 
998
  /* INT_MAX is a signal that this is actually a DW_LNE_end_sequence.  */
999
  if (line_delta != INT_MAX)
1000
    len = 1 + sizeof_leb128 (line_delta, 1);
1001
 
1002
  if (addr_delta > 50000)
1003
    {
1004
      /* DW_LNS_extended_op */
1005
      len += 1 + sizeof_leb128 (sizeof_address + 1, 0);
1006
      /* DW_LNE_set_address */
1007
      len += 1 + sizeof_address;
1008
    }
1009
  else
1010
    /* DW_LNS_fixed_advance_pc */
1011
    len += 3;
1012
 
1013
  if (line_delta == INT_MAX)
1014
    /* DW_LNS_extended_op + DW_LNE_end_sequence */
1015
    len += 3;
1016
  else
1017
    /* DW_LNS_copy */
1018
    len += 1;
1019
 
1020
  return len;
1021
}
1022
 
1023
static void
1024
emit_fixed_inc_line_addr (int line_delta, addressT addr_delta, fragS *frag,
1025
                          char *p, int len)
1026
{
1027
  expressionS *exp;
1028
  segT line_seg;
1029
  char *end = p + len;
1030
 
1031
  /* Line number sequences cannot go backward in addresses.  This means
1032
     we've incorrectly ordered the statements in the sequence.  */
1033
  assert ((offsetT) addr_delta >= 0);
1034
 
1035
  /* INT_MAX is a signal that this is actually a DW_LNE_end_sequence.  */
1036
  if (line_delta != INT_MAX)
1037
    {
1038
      *p++ = DW_LNS_advance_line;
1039
      p += output_leb128 (p, line_delta, 1);
1040
    }
1041
 
1042
  exp = symbol_get_value_expression (frag->fr_symbol);
1043
  line_seg = subseg_get (".debug_line", 0);
1044
 
1045
  /* The DW_LNS_fixed_advance_pc opcode has a 2-byte operand so it can
1046
     advance the address by at most 64K.  Linker relaxation (without
1047
     which this function would not be used) could change the operand by
1048
     an unknown amount.  If the address increment is getting close to
1049
     the limit, just reset the address.  */
1050
  if (addr_delta > 50000)
1051
    {
1052
      symbolS *to_sym;
1053
      expressionS expr;
1054
 
1055
      assert (exp->X_op = O_subtract);
1056
      to_sym = exp->X_add_symbol;
1057
 
1058
      *p++ = DW_LNS_extended_op;
1059
      p += output_leb128 (p, sizeof_address + 1, 0);
1060
      *p++ = DW_LNE_set_address;
1061
      expr.X_op = O_symbol;
1062
      expr.X_add_symbol = to_sym;
1063
      expr.X_add_number = 0;
1064
      subseg_change (line_seg, 0);
1065
      emit_expr_fix (&expr, sizeof_address, frag, p);
1066
      p += sizeof_address;
1067
    }
1068
  else
1069
    {
1070
      *p++ = DW_LNS_fixed_advance_pc;
1071
      subseg_change (line_seg, 0);
1072
      emit_expr_fix (exp, 2, frag, p);
1073
      p += 2;
1074
    }
1075
 
1076
  if (line_delta == INT_MAX)
1077
    {
1078
      *p++ = DW_LNS_extended_op;
1079
      *p++ = 1;
1080
      *p++ = DW_LNE_end_sequence;
1081
    }
1082
  else
1083
    *p++ = DW_LNS_copy;
1084
 
1085
  assert (p == end);
1086
}
1087
 
1088
/* Generate a variant frag that we can use to relax address/line
1089
   increments between fragments of the target segment.  */
1090
 
1091
static void
1092
relax_inc_line_addr (int line_delta, symbolS *to_sym, symbolS *from_sym)
1093
{
1094
  expressionS expr;
1095
  int max_chars;
1096
 
1097
  expr.X_op = O_subtract;
1098
  expr.X_add_symbol = to_sym;
1099
  expr.X_op_symbol = from_sym;
1100
  expr.X_add_number = 0;
1101
 
1102
  /* The maximum size of the frag is the line delta with a maximum
1103
     sized address delta.  */
1104
  if (DWARF2_USE_FIXED_ADVANCE_PC)
1105
    max_chars = size_fixed_inc_line_addr (line_delta,
1106
                                          -DWARF2_LINE_MIN_INSN_LENGTH);
1107
  else
1108
    max_chars = size_inc_line_addr (line_delta, -DWARF2_LINE_MIN_INSN_LENGTH);
1109
 
1110
  frag_var (rs_dwarf2dbg, max_chars, max_chars, 1,
1111
            make_expr_symbol (&expr), line_delta, NULL);
1112
}
1113
 
1114
/* The function estimates the size of a rs_dwarf2dbg variant frag
1115
   based on the current values of the symbols.  It is called before
1116
   the relaxation loop.  We set fr_subtype to the expected length.  */
1117
 
1118
int
1119
dwarf2dbg_estimate_size_before_relax (fragS *frag)
1120
{
1121
  offsetT addr_delta;
1122
  int size;
1123
 
1124
  addr_delta = resolve_symbol_value (frag->fr_symbol);
1125
  if (DWARF2_USE_FIXED_ADVANCE_PC)
1126
    size = size_fixed_inc_line_addr (frag->fr_offset, addr_delta);
1127
  else
1128
    size = size_inc_line_addr (frag->fr_offset, addr_delta);
1129
 
1130
  frag->fr_subtype = size;
1131
 
1132
  return size;
1133
}
1134
 
1135
/* This function relaxes a rs_dwarf2dbg variant frag based on the
1136
   current values of the symbols.  fr_subtype is the current length
1137
   of the frag.  This returns the change in frag length.  */
1138
 
1139
int
1140
dwarf2dbg_relax_frag (fragS *frag)
1141
{
1142
  int old_size, new_size;
1143
 
1144
  old_size = frag->fr_subtype;
1145
  new_size = dwarf2dbg_estimate_size_before_relax (frag);
1146
 
1147
  return new_size - old_size;
1148
}
1149
 
1150
/* This function converts a rs_dwarf2dbg variant frag into a normal
1151
   fill frag.  This is called after all relaxation has been done.
1152
   fr_subtype will be the desired length of the frag.  */
1153
 
1154
void
1155
dwarf2dbg_convert_frag (fragS *frag)
1156
{
1157
  offsetT addr_diff;
1158
 
1159
  addr_diff = resolve_symbol_value (frag->fr_symbol);
1160
 
1161
  /* fr_var carries the max_chars that we created the fragment with.
1162
     fr_subtype carries the current expected length.  We must, of
1163
     course, have allocated enough memory earlier.  */
1164
  assert (frag->fr_var >= (int) frag->fr_subtype);
1165
 
1166
  if (DWARF2_USE_FIXED_ADVANCE_PC)
1167
    emit_fixed_inc_line_addr (frag->fr_offset, addr_diff, frag,
1168
                              frag->fr_literal + frag->fr_fix,
1169
                              frag->fr_subtype);
1170
  else
1171
    emit_inc_line_addr (frag->fr_offset, addr_diff,
1172
                        frag->fr_literal + frag->fr_fix, frag->fr_subtype);
1173
 
1174
  frag->fr_fix += frag->fr_subtype;
1175
  frag->fr_type = rs_fill;
1176
  frag->fr_var = 0;
1177
  frag->fr_offset = 0;
1178
}
1179
 
1180
/* Generate .debug_line content for the chain of line number entries
1181
   beginning at E, for segment SEG.  */
1182
 
1183
static void
1184
process_entries (segT seg, struct line_entry *e)
1185
{
1186
  unsigned filenum = 1;
1187
  unsigned line = 1;
1188
  unsigned column = 0;
1189
  unsigned isa = 0;
1190
  unsigned flags = DWARF2_LINE_DEFAULT_IS_STMT ? DWARF2_FLAG_IS_STMT : 0;
1191
  fragS *last_frag = NULL, *frag;
1192
  addressT last_frag_ofs = 0, frag_ofs;
1193
  symbolS *last_lab = NULL, *lab;
1194
  struct line_entry *next;
1195
 
1196
  do
1197
    {
1198
      int line_delta;
1199
 
1200
      if (filenum != e->loc.filenum)
1201
        {
1202
          filenum = e->loc.filenum;
1203
          out_opcode (DW_LNS_set_file);
1204
          out_uleb128 (filenum);
1205
        }
1206
 
1207
      if (column != e->loc.column)
1208
        {
1209
          column = e->loc.column;
1210
          out_opcode (DW_LNS_set_column);
1211
          out_uleb128 (column);
1212
        }
1213
 
1214
      if (isa != e->loc.isa)
1215
        {
1216
          isa = e->loc.isa;
1217
          out_opcode (DW_LNS_set_isa);
1218
          out_uleb128 (isa);
1219
        }
1220
 
1221
      if ((e->loc.flags ^ flags) & DWARF2_FLAG_IS_STMT)
1222
        {
1223
          flags = e->loc.flags;
1224
          out_opcode (DW_LNS_negate_stmt);
1225
        }
1226
 
1227
      if (e->loc.flags & DWARF2_FLAG_BASIC_BLOCK)
1228
        out_opcode (DW_LNS_set_basic_block);
1229
 
1230
      if (e->loc.flags & DWARF2_FLAG_PROLOGUE_END)
1231
        out_opcode (DW_LNS_set_prologue_end);
1232
 
1233
      if (e->loc.flags & DWARF2_FLAG_EPILOGUE_BEGIN)
1234
        out_opcode (DW_LNS_set_epilogue_begin);
1235
 
1236
      /* Don't try to optimize away redundant entries; gdb wants two
1237
         entries for a function where the code starts on the same line as
1238
         the {, and there's no way to identify that case here.  Trust gcc
1239
         to optimize appropriately.  */
1240
      line_delta = e->loc.line - line;
1241
      lab = e->label;
1242
      frag = symbol_get_frag (lab);
1243
      frag_ofs = S_GET_VALUE (lab);
1244
 
1245
      if (last_frag == NULL)
1246
        {
1247
          out_set_addr (lab);
1248
          out_inc_line_addr (line_delta, 0);
1249
        }
1250
      else if (frag == last_frag && ! DWARF2_USE_FIXED_ADVANCE_PC)
1251
        out_inc_line_addr (line_delta, frag_ofs - last_frag_ofs);
1252
      else
1253
        relax_inc_line_addr (line_delta, lab, last_lab);
1254
 
1255
      line = e->loc.line;
1256
      last_lab = lab;
1257
      last_frag = frag;
1258
      last_frag_ofs = frag_ofs;
1259
 
1260
      next = e->next;
1261
      free (e);
1262
      e = next;
1263
    }
1264
  while (e);
1265
 
1266
  /* Emit a DW_LNE_end_sequence for the end of the section.  */
1267
  frag = last_frag_for_seg (seg);
1268
  frag_ofs = get_frag_fix (frag, seg);
1269
  if (frag == last_frag && ! DWARF2_USE_FIXED_ADVANCE_PC)
1270
    out_inc_line_addr (INT_MAX, frag_ofs - last_frag_ofs);
1271
  else
1272
    {
1273
      lab = symbol_temp_new (seg, frag_ofs, frag);
1274
      relax_inc_line_addr (INT_MAX, lab, last_lab);
1275
    }
1276
}
1277
 
1278
/* Emit the directory and file tables for .debug_line.  */
1279
 
1280
static void
1281
out_file_list (void)
1282
{
1283
  size_t size;
1284
  const char *dir;
1285
  char *cp;
1286
  unsigned int i;
1287
 
1288
  /* Emit directory list.  */
1289
  for (i = 1; i < dirs_in_use; ++i)
1290
    {
1291
      dir = remap_debug_filename (dirs[i]);
1292
      size = strlen (dir) + 1;
1293
      cp = frag_more (size);
1294
      memcpy (cp, dir, size);
1295
    }
1296
  /* Terminate it.  */
1297
  out_byte ('\0');
1298
 
1299
  for (i = 1; i < files_in_use; ++i)
1300
    {
1301
      if (files[i].filename == NULL)
1302
        {
1303
          as_bad (_("unassigned file number %ld"), (long) i);
1304
          /* Prevent a crash later, particularly for file 1.  */
1305
          files[i].filename = "";
1306
          continue;
1307
        }
1308
 
1309
      size = strlen (files[i].filename) + 1;
1310
      cp = frag_more (size);
1311
      memcpy (cp, files[i].filename, size);
1312
 
1313
      out_uleb128 (files[i].dir);       /* directory number */
1314
      out_uleb128 (0);                   /* last modification timestamp */
1315
      out_uleb128 (0);                   /* filesize */
1316
    }
1317
 
1318
  /* Terminate filename list.  */
1319
  out_byte (0);
1320
}
1321
 
1322
/* Emit the collected .debug_line data.  */
1323
 
1324
static void
1325
out_debug_line (segT line_seg)
1326
{
1327
  expressionS expr;
1328
  symbolS *line_start;
1329
  symbolS *prologue_end;
1330
  symbolS *line_end;
1331
  struct line_seg *s;
1332
  enum dwarf2_format d2f;
1333
  int sizeof_offset;
1334
 
1335
  subseg_set (line_seg, 0);
1336
 
1337
  line_start = symbol_temp_new_now ();
1338
  prologue_end = symbol_temp_make ();
1339
  line_end = symbol_temp_make ();
1340
 
1341
  /* Total length of the information for this compilation unit.  */
1342
  expr.X_op = O_subtract;
1343
  expr.X_add_symbol = line_end;
1344
  expr.X_op_symbol = line_start;
1345
 
1346
  d2f = DWARF2_FORMAT ();
1347
  if (d2f == dwarf2_format_32bit)
1348
    {
1349
      expr.X_add_number = -4;
1350
      emit_expr (&expr, 4);
1351
      sizeof_offset = 4;
1352
    }
1353
  else if (d2f == dwarf2_format_64bit)
1354
    {
1355
      expr.X_add_number = -12;
1356
      out_four (-1);
1357
      emit_expr (&expr, 8);
1358
      sizeof_offset = 8;
1359
    }
1360
  else if (d2f == dwarf2_format_64bit_irix)
1361
    {
1362
      expr.X_add_number = -8;
1363
      emit_expr (&expr, 8);
1364
      sizeof_offset = 8;
1365
    }
1366
  else
1367
    {
1368
      as_fatal (_("internal error: unknown dwarf2 format"));
1369
    }
1370
 
1371
  /* Version.  */
1372
  out_two (2);
1373
 
1374
  /* Length of the prologue following this length.  */
1375
  expr.X_op = O_subtract;
1376
  expr.X_add_symbol = prologue_end;
1377
  expr.X_op_symbol = line_start;
1378
  expr.X_add_number = - (4 + 2 + 4);
1379
  emit_expr (&expr, sizeof_offset);
1380
 
1381
  /* Parameters of the state machine.  */
1382
  out_byte (DWARF2_LINE_MIN_INSN_LENGTH);
1383
  out_byte (DWARF2_LINE_DEFAULT_IS_STMT);
1384
  out_byte (DWARF2_LINE_BASE);
1385
  out_byte (DWARF2_LINE_RANGE);
1386
  out_byte (DWARF2_LINE_OPCODE_BASE);
1387
 
1388
  /* Standard opcode lengths.  */
1389
  out_byte (0);                  /* DW_LNS_copy */
1390
  out_byte (1);                 /* DW_LNS_advance_pc */
1391
  out_byte (1);                 /* DW_LNS_advance_line */
1392
  out_byte (1);                 /* DW_LNS_set_file */
1393
  out_byte (1);                 /* DW_LNS_set_column */
1394
  out_byte (0);                  /* DW_LNS_negate_stmt */
1395
  out_byte (0);                  /* DW_LNS_set_basic_block */
1396
  out_byte (0);                  /* DW_LNS_const_add_pc */
1397
  out_byte (1);                 /* DW_LNS_fixed_advance_pc */
1398
  out_byte (0);                  /* DW_LNS_set_prologue_end */
1399
  out_byte (0);                  /* DW_LNS_set_epilogue_begin */
1400
  out_byte (1);                 /* DW_LNS_set_isa */
1401
 
1402
  out_file_list ();
1403
 
1404
  symbol_set_value_now (prologue_end);
1405
 
1406
  /* For each section, emit a statement program.  */
1407
  for (s = all_segs; s; s = s->next)
1408
    process_entries (s->seg, s->head->head);
1409
 
1410
  symbol_set_value_now (line_end);
1411
}
1412
 
1413
static void
1414
out_debug_ranges (segT ranges_seg)
1415
{
1416
  unsigned int addr_size = sizeof_address;
1417
  struct line_seg *s;
1418
  expressionS expr;
1419
  unsigned int i;
1420
 
1421
  subseg_set (ranges_seg, 0);
1422
 
1423
  /* Base Address Entry.  */
1424
  for (i = 0; i < addr_size; i++)
1425
    out_byte (0xff);
1426
  for (i = 0; i < addr_size; i++)
1427
    out_byte (0);
1428
 
1429
  /* Range List Entry.  */
1430
  for (s = all_segs; s; s = s->next)
1431
    {
1432
      fragS *frag;
1433
      symbolS *beg, *end;
1434
 
1435
      frag = first_frag_for_seg (s->seg);
1436
      beg = symbol_temp_new (s->seg, 0, frag);
1437
      s->text_start = beg;
1438
 
1439
      frag = last_frag_for_seg (s->seg);
1440
      end = symbol_temp_new (s->seg, get_frag_fix (frag, s->seg), frag);
1441
      s->text_end = end;
1442
 
1443
      expr.X_op = O_symbol;
1444
      expr.X_add_symbol = beg;
1445
      expr.X_add_number = 0;
1446
      emit_expr (&expr, addr_size);
1447
 
1448
      expr.X_op = O_symbol;
1449
      expr.X_add_symbol = end;
1450
      expr.X_add_number = 0;
1451
      emit_expr (&expr, addr_size);
1452
    }
1453
 
1454
  /* End of Range Entry.   */
1455
  for (i = 0; i < addr_size; i++)
1456
    out_byte (0);
1457
  for (i = 0; i < addr_size; i++)
1458
    out_byte (0);
1459
}
1460
 
1461
/* Emit data for .debug_aranges.  */
1462
 
1463
static void
1464
out_debug_aranges (segT aranges_seg, segT info_seg)
1465
{
1466
  unsigned int addr_size = sizeof_address;
1467
  addressT size, skip;
1468
  struct line_seg *s;
1469
  expressionS expr;
1470
  char *p;
1471
 
1472
  size = 4 + 2 + 4 + 1 + 1;
1473
 
1474
  skip = 2 * addr_size - (size & (2 * addr_size - 1));
1475
  if (skip == 2 * addr_size)
1476
    skip = 0;
1477
  size += skip;
1478
 
1479
  for (s = all_segs; s; s = s->next)
1480
    size += 2 * addr_size;
1481
 
1482
  size += 2 * addr_size;
1483
 
1484
  subseg_set (aranges_seg, 0);
1485
 
1486
  /* Length of the compilation unit.  */
1487
  out_four (size - 4);
1488
 
1489
  /* Version.  */
1490
  out_two (2);
1491
 
1492
  /* Offset to .debug_info.  */
1493
  /* ??? sizeof_offset */
1494
  TC_DWARF2_EMIT_OFFSET (section_symbol (info_seg), 4);
1495
 
1496
  /* Size of an address (offset portion).  */
1497
  out_byte (addr_size);
1498
 
1499
  /* Size of a segment descriptor.  */
1500
  out_byte (0);
1501
 
1502
  /* Align the header.  */
1503
  if (skip)
1504
    frag_align (ffs (2 * addr_size) - 1, 0, 0);
1505
 
1506
  for (s = all_segs; s; s = s->next)
1507
    {
1508
      fragS *frag;
1509
      symbolS *beg, *end;
1510
 
1511
      frag = first_frag_for_seg (s->seg);
1512
      beg = symbol_temp_new (s->seg, 0, frag);
1513
      s->text_start = beg;
1514
 
1515
      frag = last_frag_for_seg (s->seg);
1516
      end = symbol_temp_new (s->seg, get_frag_fix (frag, s->seg), frag);
1517
      s->text_end = end;
1518
 
1519
      expr.X_op = O_symbol;
1520
      expr.X_add_symbol = beg;
1521
      expr.X_add_number = 0;
1522
      emit_expr (&expr, addr_size);
1523
 
1524
      expr.X_op = O_subtract;
1525
      expr.X_add_symbol = end;
1526
      expr.X_op_symbol = beg;
1527
      expr.X_add_number = 0;
1528
      emit_expr (&expr, addr_size);
1529
    }
1530
 
1531
  p = frag_more (2 * addr_size);
1532
  md_number_to_chars (p, 0, addr_size);
1533
  md_number_to_chars (p + addr_size, 0, addr_size);
1534
}
1535
 
1536
/* Emit data for .debug_abbrev.  Note that this must be kept in
1537
   sync with out_debug_info below.  */
1538
 
1539
static void
1540
out_debug_abbrev (segT abbrev_seg)
1541
{
1542
  subseg_set (abbrev_seg, 0);
1543
 
1544
  out_uleb128 (1);
1545
  out_uleb128 (DW_TAG_compile_unit);
1546
  out_byte (DW_CHILDREN_no);
1547
  out_abbrev (DW_AT_stmt_list, DW_FORM_data4);
1548
  if (all_segs->next == NULL)
1549
    {
1550
      out_abbrev (DW_AT_low_pc, DW_FORM_addr);
1551
      out_abbrev (DW_AT_high_pc, DW_FORM_addr);
1552
    }
1553
  else
1554
    {
1555
      if (DWARF2_FORMAT () == dwarf2_format_32bit)
1556
        out_abbrev (DW_AT_ranges, DW_FORM_data4);
1557
      else
1558
        out_abbrev (DW_AT_ranges, DW_FORM_data8);
1559
    }
1560
  out_abbrev (DW_AT_name, DW_FORM_string);
1561
  out_abbrev (DW_AT_comp_dir, DW_FORM_string);
1562
  out_abbrev (DW_AT_producer, DW_FORM_string);
1563
  out_abbrev (DW_AT_language, DW_FORM_data2);
1564
  out_abbrev (0, 0);
1565
 
1566
  /* Terminate the abbreviations for this compilation unit.  */
1567
  out_byte (0);
1568
}
1569
 
1570
/* Emit a description of this compilation unit for .debug_info.  */
1571
 
1572
static void
1573
out_debug_info (segT info_seg, segT abbrev_seg, segT line_seg, segT ranges_seg)
1574
{
1575
  char producer[128];
1576
  const char *comp_dir;
1577
  const char *dirname;
1578
  expressionS expr;
1579
  symbolS *info_start;
1580
  symbolS *info_end;
1581
  char *p;
1582
  int len;
1583
  enum dwarf2_format d2f;
1584
  int sizeof_offset;
1585
 
1586
  subseg_set (info_seg, 0);
1587
 
1588
  info_start = symbol_temp_new_now ();
1589
  info_end = symbol_temp_make ();
1590
 
1591
  /* Compilation Unit length.  */
1592
  expr.X_op = O_subtract;
1593
  expr.X_add_symbol = info_end;
1594
  expr.X_op_symbol = info_start;
1595
 
1596
  d2f = DWARF2_FORMAT ();
1597
  if (d2f == dwarf2_format_32bit)
1598
    {
1599
      expr.X_add_number = -4;
1600
      emit_expr (&expr, 4);
1601
      sizeof_offset = 4;
1602
    }
1603
  else if (d2f == dwarf2_format_64bit)
1604
    {
1605
      expr.X_add_number = -12;
1606
      out_four (-1);
1607
      emit_expr (&expr, 8);
1608
      sizeof_offset = 8;
1609
    }
1610
  else if (d2f == dwarf2_format_64bit_irix)
1611
    {
1612
      expr.X_add_number = -8;
1613
      emit_expr (&expr, 8);
1614
      sizeof_offset = 8;
1615
    }
1616
  else
1617
    {
1618
      as_fatal (_("internal error: unknown dwarf2 format"));
1619
    }
1620
 
1621
  /* DWARF version.  */
1622
  out_two (2);
1623
 
1624
  /* .debug_abbrev offset */
1625
  TC_DWARF2_EMIT_OFFSET (section_symbol (abbrev_seg), sizeof_offset);
1626
 
1627
  /* Target address size.  */
1628
  out_byte (sizeof_address);
1629
 
1630
  /* DW_TAG_compile_unit DIE abbrev */
1631
  out_uleb128 (1);
1632
 
1633
  /* DW_AT_stmt_list */
1634
  /* ??? sizeof_offset */
1635
  TC_DWARF2_EMIT_OFFSET (section_symbol (line_seg), 4);
1636
 
1637
  /* These two attributes are emitted if all of the code is contiguous.  */
1638
  if (all_segs->next == NULL)
1639
    {
1640
      /* DW_AT_low_pc */
1641
      expr.X_op = O_symbol;
1642
      expr.X_add_symbol = all_segs->text_start;
1643
      expr.X_add_number = 0;
1644
      emit_expr (&expr, sizeof_address);
1645
 
1646
      /* DW_AT_high_pc */
1647
      expr.X_op = O_symbol;
1648
      expr.X_add_symbol = all_segs->text_end;
1649
      expr.X_add_number = 0;
1650
      emit_expr (&expr, sizeof_address);
1651
    }
1652
  else
1653
    {
1654
      /* This attribute is emitted if the code is disjoint.  */
1655
      /* DW_AT_ranges.  */
1656
      TC_DWARF2_EMIT_OFFSET (section_symbol (ranges_seg), sizeof_offset);
1657
    }
1658
 
1659
  /* DW_AT_name.  We don't have the actual file name that was present
1660
     on the command line, so assume files[1] is the main input file.
1661
     We're not supposed to get called unless at least one line number
1662
     entry was emitted, so this should always be defined.  */
1663
  if (files_in_use == 0)
1664
    abort ();
1665
  if (files[1].dir)
1666
    {
1667
      dirname = remap_debug_filename (dirs[files[1].dir]);
1668
      len = strlen (dirname);
1669
      p = frag_more (len + 1);
1670
      memcpy (p, dirname, len);
1671
      INSERT_DIR_SEPARATOR (p, len);
1672
    }
1673
  len = strlen (files[1].filename) + 1;
1674
  p = frag_more (len);
1675
  memcpy (p, files[1].filename, len);
1676
 
1677
  /* DW_AT_comp_dir */
1678
  comp_dir = remap_debug_filename (getpwd ());
1679
  len = strlen (comp_dir) + 1;
1680
  p = frag_more (len);
1681
  memcpy (p, comp_dir, len);
1682
 
1683
  /* DW_AT_producer */
1684
  sprintf (producer, "GNU AS %s", VERSION);
1685
  len = strlen (producer) + 1;
1686
  p = frag_more (len);
1687
  memcpy (p, producer, len);
1688
 
1689
  /* DW_AT_language.  Yes, this is probably not really MIPS, but the
1690
     dwarf2 draft has no standard code for assembler.  */
1691
  out_two (DW_LANG_Mips_Assembler);
1692
 
1693
  symbol_set_value_now (info_end);
1694
}
1695
 
1696
/* Finish the dwarf2 debug sections.  We emit .debug.line if there
1697
   were any .file/.loc directives, or --gdwarf2 was given, or if the
1698
   file has a non-empty .debug_info section.  If we emit .debug_line,
1699
   and the .debug_info section is empty, we also emit .debug_info,
1700
   .debug_aranges and .debug_abbrev.  ALL_SEGS will be non-null if
1701
   there were any .file/.loc directives, or --gdwarf2 was given and
1702
   there were any located instructions emitted.  */
1703
 
1704
void
1705
dwarf2_finish (void)
1706
{
1707
  segT line_seg;
1708
  struct line_seg *s;
1709
  segT info_seg;
1710
  int emit_other_sections = 0;
1711
 
1712
  info_seg = bfd_get_section_by_name (stdoutput, ".debug_info");
1713
  emit_other_sections = info_seg == NULL || !seg_not_empty_p (info_seg);
1714
 
1715
  if (!all_segs && emit_other_sections)
1716
    /* There is no line information and no non-empty .debug_info
1717
       section.  */
1718
    return;
1719
 
1720
  /* Calculate the size of an address for the target machine.  */
1721
  sizeof_address = DWARF2_ADDR_SIZE (stdoutput);
1722
 
1723
  /* Create and switch to the line number section.  */
1724
  line_seg = subseg_new (".debug_line", 0);
1725
  bfd_set_section_flags (stdoutput, line_seg, SEC_READONLY | SEC_DEBUGGING);
1726
 
1727
  /* For each subsection, chain the debug entries together.  */
1728
  for (s = all_segs; s; s = s->next)
1729
    {
1730
      struct line_subseg *ss = s->head;
1731
      struct line_entry **ptail = ss->ptail;
1732
 
1733
      while ((ss = ss->next) != NULL)
1734
        {
1735
          *ptail = ss->head;
1736
          ptail = ss->ptail;
1737
        }
1738
    }
1739
 
1740
  out_debug_line (line_seg);
1741
 
1742
  /* If this is assembler generated line info, and there is no
1743
     debug_info already, we need .debug_info and .debug_abbrev
1744
     sections as well.  */
1745
  if (emit_other_sections)
1746
    {
1747
      segT abbrev_seg;
1748
      segT aranges_seg;
1749
      segT ranges_seg;
1750
 
1751
      assert (all_segs);
1752
 
1753
      info_seg = subseg_new (".debug_info", 0);
1754
      abbrev_seg = subseg_new (".debug_abbrev", 0);
1755
      aranges_seg = subseg_new (".debug_aranges", 0);
1756
 
1757
      bfd_set_section_flags (stdoutput, info_seg,
1758
                             SEC_READONLY | SEC_DEBUGGING);
1759
      bfd_set_section_flags (stdoutput, abbrev_seg,
1760
                             SEC_READONLY | SEC_DEBUGGING);
1761
      bfd_set_section_flags (stdoutput, aranges_seg,
1762
                             SEC_READONLY | SEC_DEBUGGING);
1763
 
1764
      record_alignment (aranges_seg, ffs (2 * sizeof_address) - 1);
1765
 
1766
      if (all_segs->next == NULL)
1767
        ranges_seg = NULL;
1768
      else
1769
        {
1770
          ranges_seg = subseg_new (".debug_ranges", 0);
1771
          bfd_set_section_flags (stdoutput, ranges_seg,
1772
                                 SEC_READONLY | SEC_DEBUGGING);
1773
          record_alignment (ranges_seg, ffs (2 * sizeof_address) - 1);
1774
          out_debug_ranges (ranges_seg);
1775
        }
1776
 
1777
      out_debug_aranges (aranges_seg, info_seg);
1778
      out_debug_abbrev (abbrev_seg);
1779
      out_debug_info (info_seg, abbrev_seg, line_seg, ranges_seg);
1780
    }
1781
}

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.