Subversion Repositories openrisc_me

## Process this file with automake to generate Makefile.in

AUTOMAKE_OPTIONS = dejagnu no-dist foreign

ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd

SUBDIRS = doc po

tooldir = $(exec_prefix)/$(target_alias)

## These aren't set by automake, because they appear in

## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and

## thus is not seen by automake.

CC_FOR_BUILD = @CC_FOR_BUILD@

EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@

YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`

YFLAGS = -d

LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`

# Automake 1.10+ disables lex and yacc output file regeneration if

# maintainer mode is disabled.  Avoid this.

am__skiplex =

am__skipyacc =

WARN_CFLAGS = @WARN_CFLAGS@

NO_WERROR = @NO_WERROR@

AM_CFLAGS = $(WARN_CFLAGS)

LIBICONV = @LIBICONV@

# these two are almost the same program

AR_PROG=ar

RANLIB_PROG=ranlib

# objcopy and strip should be the same program

OBJCOPY_PROG=objcopy

STRIP_PROG=strip-new

STRINGS_PROG=strings

READELF_PROG=readelf

# These should all be the same program too.

SIZE_PROG=size

NM_PROG=nm-new

OBJDUMP_PROG=objdump

# This is the demangler, as a standalone program.

# Note: This one is used as the installed name too, unlike the above.

DEMANGLER_PROG=cxxfilt

ADDR2LINE_PROG=addr2line

NLMCONV_PROG=nlmconv

DLLTOOL_PROG=dlltool

WINDRES_PROG=windres

WINDMC_PROG=windmc

DLLWRAP_PROG=dllwrap

SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)

bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) @BUILD_DLLWRAP@ @BUILD_INSTALL_MISC@

## We need a special rule to install the programs which are built with

## -new, and to rename cxxfilt to c++filt.

RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)

noinst_PROGRAMS = $(RENAMED_PROGS) @BUILD_MISC@

EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)

# Stuff that goes in tooldir/ if appropriate.

TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy

BASEDIR = $(srcdir)/..

BFDDIR = $(BASEDIR)/bfd

INCDIR  = $(BASEDIR)/include

AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \

         @HDEFINES@ \

         @INCINTL@ \

         -DLOCALEDIR="\"$(datadir)/locale\"" \

         -Dbin_dummy_emulation=$(EMULATION_VECTOR)

HFILES = \

        arsup.h binemul.h bucomm.h budbg.h \

        coffgrok.h debug.h dlltool.h dwarf.h nlmconv.h \

        sysdep.h unwind-ia64.h windres.h winduni.h windint.h \

        windmc.h

GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h

BUILT_SOURCES = $(GENERATED_HFILES)

CFILES = \

        addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \

        coffdump.c coffgrok.c cxxfilt.c \

        dwarf.c debug.c dlltool.c dllwrap.c \

        emul_aix.c emul_vanilla.c filemode.c \

        ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \

        nlmconv.c nm.c not-ranlib.c not-strip.c \

        objcopy.c objdump.c prdbg.c \

        rclex.c rdcoff.c rddbg.c readelf.c rename.c \

        resbin.c rescoff.c resrc.c resres.c \

        size.c srconv.c stabs.c strings.c sysdump.c \

        unwind-ia64.c version.c \

        windres.c winduni.c wrstabs.c \

        windmc.c mclex.c

GENERATED_CFILES = \

        arparse.c arlex.c sysroff.c sysinfo.c syslex.c \

        defparse.c deflex.c nlmheader.c rcparse.c mcparse.c

DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c

WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c

# Code shared by all the binutils.

BULIBS = bucomm.c version.c filemode.c

BFDLIB = ../bfd/libbfd.la

OPCODES = ../opcodes/libopcodes.la

LIBIBERTY = ../libiberty/libiberty.a

POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)

po/POTFILES.in: @MAINT@ Makefile

        for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \

          && mv tmp $(srcdir)/po/POTFILES.in

EXPECT = expect

RUNTEST = runtest

CC_FOR_TARGET = ` \

  if [ -f $$r/../gcc/xgcc ] ; then \

    if [ -f $$r/../newlib/Makefile ] ; then \

      echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \

    else \

      echo $$r/../gcc/xgcc -B$$r/../gcc/; \

    fi; \

  else \

    if [ "@host@" = "@target@" ] ; then \

      echo $(CC); \

    else \

      echo gcc | sed '$(transform)'; \

    fi; \

  fi`

check-DEJAGNU: site.exp

        srcdir=`cd $(srcdir) && pwd`; export srcdir; \

        r=`pwd`; export r; \

        EXPECT=$(EXPECT); export EXPECT; \

        runtest=$(RUNTEST); \

        if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \

          CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \

                $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \

                        $(RUNTESTFLAGS); \

        else echo "WARNING: could not find \`runtest'" 1>&2; :;\

        fi

installcheck-local:

        /bin/sh $(srcdir)/sanity.sh $(bindir)

# There's no global DEPENDENCIES.  So, we must explicitly list everything

# which depends on libintl, since we don't know whether LIBINTL_DEP will be

# non-empty until configure time.  Ugh!

size_DEPENDENCIES =      $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

objdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES)

nm_new_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

ar_DEPENDENCIES =        $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

strings_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

ranlib_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

cxxfilt_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

objcopy_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

nlmconv_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

srconv_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

sysdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

coffdump_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

dlltool_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

windres_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

windmc_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)

readelf_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)

dllwrap_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)

LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)

size_SOURCES = size.c $(BULIBS)

objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)

strings_SOURCES = strings.c $(BULIBS)

readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c

readelf_LDADD   = $(LIBINTL) $(LIBIBERTY)

strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)

nm_new_SOURCES = nm.c $(BULIBS)

objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS)

objdump_LDADD = $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)

objdump.o:objdump.c

if am__fastdepCC

        $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c

        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

else

if AMDEP

        source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@

        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

endif

        $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c

endif

cxxfilt_SOURCES = cxxfilt.c $(BULIBS)

ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \

        emul_$(EMULATION).c $(BULIBS)

EXTRA_ar_SOURCES = $(CFILES)

ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)

ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \

        binemul.c emul_$(EMULATION).c $(BULIBS)

ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)

addr2line_SOURCES = addr2line.c $(BULIBS)

# The following is commented out for the conversion to automake.

# This rule creates a single binary that switches between ar and ranlib

# by looking at argv[0].  Use this kludge to save some disk space.

# However, you have to install things by hand.

# (That is after 'make install', replace the installed ranlib by a link to ar.)

# Alternatively, you can install ranlib.sh as ranlib.

# ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o

#       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)

#       -rm -f $(RANLIB_PROG)

#       -ln $(AR_PROG) $(RANLIB_PROG)

#

# objcopy and strip in one binary that uses argv[0] to decide its action.

#

#objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o

#       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)

#       -rm -f $(STRIP_PROG)

#       -ln $(OBJCOPY_PROG) $(STRIP_PROG)

sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info

        ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c

        ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c

        ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c

sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info

        ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h

sysinfo$(EXEEXT_FOR_BUILD): sysinfo.o syslex.o

        $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.o syslex.o

syslex.o: syslex.c sysinfo.h config.h

        if [ -r syslex.c ]; then \

          $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) syslex.c ; \

        else \

          $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex.c ;\

        fi

sysinfo.o: sysinfo.c

        if [ -r sysinfo.c ]; then \

          $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \

        else \

          $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \

        fi

bin2c$(EXEEXT_FOR_BUILD):

        $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c $(srcdir)/version.c

embedspu: embedspu.sh

        sed "s@^program_transform_name=@program_transform_name=$(program_transform_name)@" < $< > $@

        chmod a+x $@

# We need these for parallel make.

sysinfo.h: sysinfo.c

# Disable -Werror, if it has been enabled, since old versions of bison/

# yacc will produce working code which contain compile time warnings.

arparse.o: arparse.c

if am__fastdepCC

        $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)

        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

else

if AMDEP

        source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@

        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

endif

        $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)

endif

arlex.o: arlex.c

if am__fastdepCC

        $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)

        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

else

if AMDEP

        source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@

        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

endif

        $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)

endif

sysroff.o: sysroff.c

if am__fastdepCC

        $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)

        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

else

if AMDEP

        source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@

        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

endif

        $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)

endif

defparse.o: defparse.c

if am__fastdepCC

        $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)

        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

else

if AMDEP

        source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@

        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

endif

        $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)

endif

deflex.o: deflex.c

if am__fastdepCC

        $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)

        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

else

if AMDEP

        source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@

        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

endif

        $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)

endif

nlmheader.o: nlmheader.c

if am__fastdepCC

        $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)

        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

else

if AMDEP

        source='nlmheader.c' object='$@' libtool=no @AMDEPBACKSLASH@

        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

endif

        $(COMPILE) -c `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)

endif

rcparse.o: rcparse.c

if am__fastdepCC

        $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)

        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

else

if AMDEP

        source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@

        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

endif

        $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)

endif

mcparse.o: mcparse.c

if am__fastdepCC

        $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)

        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

else

if AMDEP

        source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@

        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

endif

        $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)

endif

rclex.o: rclex.c

if am__fastdepCC

        $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)

        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

else

if AMDEP

        source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@

        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

endif

        $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)

endif

mclex.o: mclex.c

if am__fastdepCC

        $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)

        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

else

if AMDEP

        source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@

        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

endif

        $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)

endif

srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)

srconv.o: sysroff.c

dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)

dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)

dlltool.o:

if am__fastdepCC

        $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/dlltool.c

        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

else

if AMDEP

        source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@

        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

endif

        $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c

endif

rescoff.o:

if am__fastdepCC

        $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/rescoff.c

        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

else

if AMDEP

        source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@

        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

endif

        $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c

endif

coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)

sysdump_SOURCES = sysdump.c $(BULIBS)

sysdump.o: sysroff.c

# coff/sym.h and coff/ecoff.h won't be found by the automatic dependency

# scripts, since they are only included conditionally.

nlmconv.o: nlmconv.c

if am__fastdepCC

        ldname=`echo ld | sed '$(transform)'`; \

        $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ \

          -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c

        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

else

if AMDEP

        source='nlmconv.c' object='$@' libtool=no @AMDEPBACKSLASH@

        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

endif

        ldname=`echo ld | sed '$(transform)'`; \

        $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c

endif

nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)

windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \

        winduni.c resres.c $(BULIBS)

windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)

windmc_SOURCES = windmc.c mcparse.y mclex.c \

        winduni.c $(BULIBS)

windmc_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)

dllwrap_SOURCES = dllwrap.c version.c

dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)

EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \

        syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \

        mcparse.h mcparse.c

diststuff: $(EXTRA_DIST) info

all: info

DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak

MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \

  binutils.log binutils.sum abcdefgh*

mostlyclean-local:

        -rm -rf tmpdir

.PHONY: install-exec-local

install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)

        @list='$(RENAMED_PROGS)'; for p in $$list; do \

          if test -f $$p$(EXEEXT); then \

            echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \

            $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \

          else :; fi; \

        done

        $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin

        for i in $(TOOL_PROGS); do \

          if [ -f $$i$(EXEEXT) ]; then \

            j=`echo $$i | sed -e 's/-new//'`; \

            k=`echo $$j | sed '$(transform)'`; \

            if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \

              rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \

              ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \

                || $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \

            fi; \

          else true; \

          fi; \

        done