Subversion Repositories openrisc_2011-10-31

@c Copyright 2001, 2002, 2006 Free Software Foundation, Inc.

@c This is part of the GAS manual.

@c For copying conditions, see the file as.texinfo.

@ifset GENERIC

@page

@node PDP-11-Dependent

@chapter PDP-11 Dependent Features

@end ifset

@ifclear GENERIC

@node Machine Dependencies

@chapter PDP-11 Dependent Features

@end ifclear

@cindex PDP-11 support

@menu

* PDP-11-Options::              Options

* PDP-11-Pseudos::              Assembler Directives

* PDP-11-Syntax::               DEC Syntax versus BSD Syntax

* PDP-11-Mnemonics::            Instruction Naming

* PDP-11-Synthetic::            Synthetic Instructions

@end menu

@node PDP-11-Options

@section Options

@cindex options for PDP-11

The PDP-11 version of @code{@value{AS}} has a rich set of machine

dependent options.

@subsection Code Generation Options

@table @code

@cindex -mpic

@cindex -mno-pic

@item -mpic | -mno-pic

Generate position-independent (or position-dependent) code.

The default is to generate position-independent code.

@end table

@subsection Instruction Set Extension Options

These options enables or disables the use of extensions over the base

line instruction set as introduced by the first PDP-11 CPU: the KA11.

Most options come in two variants: a @code{-m}@var{extension} that

enables @var{extension}, and a @code{-mno-}@var{extension} that disables

@var{extension}.

The default is to enable all extensions.

@table @code

@cindex -mall

@cindex -mall-extensions

@item -mall | -mall-extensions

Enable all instruction set extensions.

@cindex -mno-extensions

@item -mno-extensions

Disable all instruction set extensions.

@cindex -mcis

@cindex -mno-cis

@item -mcis | -mno-cis

Enable (or disable) the use of the commercial instruction set, which

consists of these instructions: @code{ADDNI}, @code{ADDN}, @code{ADDPI},

@code{ADDP}, @code{ASHNI}, @code{ASHN}, @code{ASHPI}, @code{ASHP},

@code{CMPCI}, @code{CMPC}, @code{CMPNI}, @code{CMPN}, @code{CMPPI},

@code{CMPP}, @code{CVTLNI}, @code{CVTLN}, @code{CVTLPI}, @code{CVTLP},

@code{CVTNLI}, @code{CVTNL}, @code{CVTNPI}, @code{CVTNP}, @code{CVTPLI},

@code{CVTPL}, @code{CVTPNI}, @code{CVTPN}, @code{DIVPI}, @code{DIVP},

@code{L2DR}, @code{L3DR}, @code{LOCCI}, @code{LOCC}, @code{MATCI},

@code{MATC}, @code{MOVCI}, @code{MOVC}, @code{MOVRCI}, @code{MOVRC},

@code{MOVTCI}, @code{MOVTC}, @code{MULPI}, @code{MULP}, @code{SCANCI},

@code{SCANC}, @code{SKPCI}, @code{SKPC}, @code{SPANCI}, @code{SPANC},

@code{SUBNI}, @code{SUBN}, @code{SUBPI}, and @code{SUBP}.

@cindex -mcsm

@cindex -mno-csm

@item -mcsm | -mno-csm

Enable (or disable) the use of the @code{CSM} instruction.

@cindex -meis

@cindex -mno-eis

@item -meis | -mno-eis

Enable (or disable) the use of the extended instruction set, which

consists of these instructions: @code{ASHC}, @code{ASH}, @code{DIV},

@code{MARK}, @code{MUL}, @code{RTT}, @code{SOB} @code{SXT}, and

@code{XOR}.

@cindex -mfis

@cindex -mno-fis

@cindex -mkev11

@cindex -mkev11

@cindex -mno-kev11

@item -mfis | -mkev11

@itemx -mno-fis | -mno-kev11

Enable (or disable) the use of the KEV11 floating-point instructions:

@code{FADD}, @code{FDIV}, @code{FMUL}, and @code{FSUB}.

@cindex -mfpp

@cindex -mno-fpp

@cindex -mfpu

@cindex -mno-fpu

@cindex -mfp-11

@cindex -mno-fp-11

@item -mfpp | -mfpu | -mfp-11

@itemx -mno-fpp | -mno-fpu | -mno-fp-11

Enable (or disable) the use of FP-11 floating-point instructions:

@code{ABSF}, @code{ADDF}, @code{CFCC}, @code{CLRF}, @code{CMPF},

@code{DIVF}, @code{LDCFF}, @code{LDCIF}, @code{LDEXP}, @code{LDF},

@code{LDFPS}, @code{MODF}, @code{MULF}, @code{NEGF}, @code{SETD},

@code{SETF}, @code{SETI}, @code{SETL}, @code{STCFF}, @code{STCFI},

@code{STEXP}, @code{STF}, @code{STFPS}, @code{STST}, @code{SUBF}, and

@code{TSTF}.

@cindex -mlimited-eis

@cindex -mno-limited-eis

@item -mlimited-eis | -mno-limited-eis

Enable (or disable) the use of the limited extended instruction set:

@code{MARK}, @code{RTT}, @code{SOB}, @code{SXT}, and @code{XOR}.

The -mno-limited-eis options also implies -mno-eis.

@cindex -mmfpt

@cindex -mno-mfpt

@item -mmfpt | -mno-mfpt

Enable (or disable) the use of the @code{MFPT} instruction.

@cindex -mmutiproc

@cindex -mno-mutiproc

@item -mmultiproc | -mno-multiproc

Enable (or disable) the use of multiprocessor instructions: @code{TSTSET} and

@code{WRTLCK}.

@cindex -mmxps

@cindex -mno-mxps

@item -mmxps | -mno-mxps

Enable (or disable) the use of the @code{MFPS} and @code{MTPS} instructions.

@cindex -mspl

@cindex -mno-spl

@item -mspl | -mno-spl

Enable (or disable) the use of the @code{SPL} instruction.

@cindex -mmicrocode

@cindex -mno-microcode

Enable (or disable) the use of the microcode instructions: @code{LDUB},

@code{MED}, and @code{XFC}.

@end table

@subsection CPU Model Options

These options enable the instruction set extensions supported by a

particular CPU, and disables all other extensions.

@table @code

@cindex -mka11

@item -mka11

KA11 CPU.  Base line instruction set only.

@cindex -mkb11

@item -mkb11

KB11 CPU.  Enable extended instruction set and @code{SPL}.

@cindex -mkd11a

@item -mkd11a

KD11-A CPU.  Enable limited extended instruction set.

@cindex -mkd11b

@item -mkd11b

KD11-B CPU.  Base line instruction set only.

@cindex -mkd11d

@item -mkd11d

KD11-D CPU.  Base line instruction set only.

@cindex -mkd11e

@item -mkd11e

KD11-E CPU.  Enable extended instruction set, @code{MFPS}, and @code{MTPS}.

@cindex -mkd11f

@cindex -mkd11h

@cindex -mkd11q

@item -mkd11f | -mkd11h | -mkd11q

KD11-F, KD11-H, or KD11-Q CPU.  Enable limited extended instruction set,

@code{MFPS}, and @code{MTPS}.

@cindex -mkd11k

@item -mkd11k

KD11-K CPU.  Enable extended instruction set, @code{LDUB}, @code{MED},

@code{MFPS}, @code{MFPT}, @code{MTPS}, and @code{XFC}.

@cindex -mkd11z

@item -mkd11z

KD11-Z CPU.  Enable extended instruction set, @code{CSM}, @code{MFPS},

@code{MFPT}, @code{MTPS}, and @code{SPL}.

@cindex -mf11

@item -mf11

F11 CPU.  Enable extended instruction set, @code{MFPS}, @code{MFPT}, and

@code{MTPS}.

@cindex -mj11

@item -mj11

J11 CPU.  Enable extended instruction set, @code{CSM}, @code{MFPS},

@code{MFPT}, @code{MTPS}, @code{SPL}, @code{TSTSET}, and @code{WRTLCK}.

@cindex -mt11

@item -mt11

T11 CPU.  Enable limited extended instruction set, @code{MFPS}, and

@code{MTPS}.

@end table

@subsection Machine Model Options

These options enable the instruction set extensions supported by a

particular machine model, and disables all other extensions.

@table @code

@cindex -m11/03

@item -m11/03

Same as @code{-mkd11f}.

@cindex -m11/04

@item -m11/04

Same as @code{-mkd11d}.

@cindex -m11/05

@cindex -m11/10

@item -m11/05 | -m11/10

Same as @code{-mkd11b}.

@cindex -m11/15

@cindex -m11/20

@item -m11/15 | -m11/20

Same as @code{-mka11}.

@cindex -m11/21

@item -m11/21

Same as @code{-mt11}.

@cindex -m11/23

@cindex -m11/24

@item -m11/23 | -m11/24

Same as @code{-mf11}.

@cindex -m11/34

@item -m11/34

Same as @code{-mkd11e}.

@cindex -m11/34a

@item -m11/34a

Ame as @code{-mkd11e} @code{-mfpp}.

@cindex -m11/35

@cindex -m11/40

@item -m11/35 | -m11/40

Same as @code{-mkd11a}.

@cindex -m11/44

@item -m11/44

Same as @code{-mkd11z}.

@cindex -m11/45

@cindex -m11/50

@cindex -m11/55

@cindex -m11/70

@item -m11/45 | -m11/50 | -m11/55 | -m11/70

Same as @code{-mkb11}.

@cindex -m11/53

@cindex -m11/73

@cindex -m11/83

@cindex -m11/84

@cindex -m11/93

@cindex -m11/94

@item -m11/53 | -m11/73 | -m11/83 | -m11/84 | -m11/93 | -m11/94

Same as @code{-mj11}.

@cindex -m11/60

@item -m11/60

Same as @code{-mkd11k}.

@end table

@node PDP-11-Pseudos

@section Assembler Directives

The PDP-11 version of @code{@value{AS}} has a few machine

dependent assembler directives.

@table @code

@item .bss

Switch to the @code{bss} section.

@item .even

Align the location counter to an even number.

@end table

@node PDP-11-Syntax

@section PDP-11 Assembly Language Syntax

@cindex PDP-11 syntax

@cindex DEC syntax

@cindex BSD syntax

@code{@value{AS}} supports both DEC syntax and BSD syntax.  The only

difference is that in DEC syntax, a @code{#} character is used to denote

an immediate constants, while in BSD syntax the character for this

purpose is @code{$}.

@cindex PDP-11 general-purpose register syntax

general-purpose registers are named @code{r0} through @code{r7}.

Mnemonic alternatives for @code{r6} and @code{r7} are @code{sp} and

@code{pc}, respectively.

@cindex PDP-11 floating-point register syntax

Floating-point registers are named @code{ac0} through @code{ac3}, or

alternatively @code{fr0} through @code{fr3}.

@cindex PDP-11 comments

Comments are started with a @code{#} or a @code{/} character, and extend

to the end of the line.  (FIXME: clash with immediates?)

@node PDP-11-Mnemonics

@section Instruction Naming

@cindex PDP-11 instruction naming

Some instructions have alternative names.

@table @code

@item BCC

@code{BHIS}

@item BCS

@code{BLO}

@item L2DR

@code{L2D}

@item L3DR

@code{L3D}

@item SYS

@code{TRAP}

@end table

@node PDP-11-Synthetic

@section Synthetic Instructions

The @code{JBR} and @code{J}@var{CC} synthetic instructions are not

supported yet.