| 1 |
205 |
julius |
[^:]*: Assembler messages:
|
| 2 |
|
|
[^:]*:36: Error: lo register required -- `tst r8,r0'
|
| 3 |
|
|
[^:]*:36: Error: lo register required -- `tst r0,r8'
|
| 4 |
|
|
[^:]*:36: Error: unshifted register required -- `tst r0,#12'
|
| 5 |
|
|
[^:]*:36: Error: unshifted register required -- `tst r0,r1,lsl#2'
|
| 6 |
|
|
[^:]*:36: Error: unshifted register required -- `tst r0,r1,lsl r3'
|
| 7 |
|
|
[^:]*:37: Error: lo register required -- `cmn r8,r0'
|
| 8 |
|
|
[^:]*:37: Error: lo register required -- `cmn r0,r8'
|
| 9 |
|
|
[^:]*:37: Error: unshifted register required -- `cmn r0,#12'
|
| 10 |
|
|
[^:]*:37: Error: unshifted register required -- `cmn r0,r1,lsl#2'
|
| 11 |
|
|
[^:]*:37: Error: unshifted register required -- `cmn r0,r1,lsl r3'
|
| 12 |
|
|
[^:]*:38: Error: lo register required -- `mvn r8,r0'
|
| 13 |
|
|
[^:]*:38: Error: lo register required -- `mvn r0,r8'
|
| 14 |
|
|
[^:]*:38: Error: unshifted register required -- `mvn r0,#12'
|
| 15 |
|
|
[^:]*:38: Error: unshifted register required -- `mvn r0,r1,lsl#2'
|
| 16 |
|
|
[^:]*:38: Error: unshifted register required -- `mvn r0,r1,lsl r3'
|
| 17 |
|
|
[^:]*:39: Error: lo register required -- `neg r8,r0'
|
| 18 |
|
|
[^:]*:39: Error: lo register required -- `neg r0,r8'
|
| 19 |
|
|
[^:]*:40: Error: lo register required -- `rev r8,r0'
|
| 20 |
|
|
[^:]*:40: Error: lo register required -- `rev r0,r8'
|
| 21 |
|
|
[^:]*:41: Error: lo register required -- `rev16 r8,r0'
|
| 22 |
|
|
[^:]*:41: Error: lo register required -- `rev16 r0,r8'
|
| 23 |
|
|
[^:]*:42: Error: lo register required -- `revsh r8,r0'
|
| 24 |
|
|
[^:]*:42: Error: lo register required -- `revsh r0,r8'
|
| 25 |
|
|
[^:]*:43: Error: lo register required -- `sxtb r8,r0'
|
| 26 |
|
|
[^:]*:43: Error: lo register required -- `sxtb r0,r8'
|
| 27 |
|
|
[^:]*:43: Error: Thumb encoding does not support rotation -- `sxtb r0,r1,ror#8'
|
| 28 |
|
|
[^:]*:44: Error: lo register required -- `sxth r8,r0'
|
| 29 |
|
|
[^:]*:44: Error: lo register required -- `sxth r0,r8'
|
| 30 |
|
|
[^:]*:44: Error: Thumb encoding does not support rotation -- `sxth r0,r1,ror#8'
|
| 31 |
|
|
[^:]*:45: Error: lo register required -- `uxtb r8,r0'
|
| 32 |
|
|
[^:]*:45: Error: lo register required -- `uxtb r0,r8'
|
| 33 |
|
|
[^:]*:45: Error: Thumb encoding does not support rotation -- `uxtb r0,r1,ror#8'
|
| 34 |
|
|
[^:]*:46: Error: lo register required -- `uxth r8,r0'
|
| 35 |
|
|
[^:]*:46: Error: lo register required -- `uxth r0,r8'
|
| 36 |
|
|
[^:]*:46: Error: Thumb encoding does not support rotation -- `uxth r0,r1,ror#8'
|
| 37 |
|
|
[^:]*:48: Error: dest must overlap one source register -- `adc r1,r2,r3'
|
| 38 |
|
|
[^:]*:48: Error: lo register required -- `adc r8,r0'
|
| 39 |
|
|
[^:]*:48: Error: lo register required -- `adc r0,r8'
|
| 40 |
|
|
[^:]*:48: Error: unshifted register required -- `adc r0,#12'
|
| 41 |
|
|
[^:]*:48: Error: unshifted register required -- `adc r0,r1,lsl#2'
|
| 42 |
|
|
[^:]*:48: Error: unshifted register required -- `adc r0,r1,lsl r3'
|
| 43 |
|
|
[^:]*:49: Error: dest must overlap one source register -- `and r1,r2,r3'
|
| 44 |
|
|
[^:]*:49: Error: lo register required -- `and r8,r0'
|
| 45 |
|
|
[^:]*:49: Error: lo register required -- `and r0,r8'
|
| 46 |
|
|
[^:]*:49: Error: unshifted register required -- `and r0,#12'
|
| 47 |
|
|
[^:]*:49: Error: unshifted register required -- `and r0,r1,lsl#2'
|
| 48 |
|
|
[^:]*:49: Error: unshifted register required -- `and r0,r1,lsl r3'
|
| 49 |
|
|
[^:]*:50: Error: dest and source1 must be the same register -- `bic r1,r2,r3'
|
| 50 |
|
|
[^:]*:50: Error: lo register required -- `bic r8,r0'
|
| 51 |
|
|
[^:]*:50: Error: lo register required -- `bic r0,r8'
|
| 52 |
|
|
[^:]*:50: Error: unshifted register required -- `bic r0,#12'
|
| 53 |
|
|
[^:]*:50: Error: unshifted register required -- `bic r0,r1,lsl#2'
|
| 54 |
|
|
[^:]*:50: Error: unshifted register required -- `bic r0,r1,lsl r3'
|
| 55 |
|
|
[^:]*:51: Error: dest must overlap one source register -- `eor r1,r2,r3'
|
| 56 |
|
|
[^:]*:51: Error: lo register required -- `eor r8,r0'
|
| 57 |
|
|
[^:]*:51: Error: lo register required -- `eor r0,r8'
|
| 58 |
|
|
[^:]*:51: Error: unshifted register required -- `eor r0,#12'
|
| 59 |
|
|
[^:]*:51: Error: unshifted register required -- `eor r0,r1,lsl#2'
|
| 60 |
|
|
[^:]*:51: Error: unshifted register required -- `eor r0,r1,lsl r3'
|
| 61 |
|
|
[^:]*:52: Error: dest must overlap one source register -- `orr r1,r2,r3'
|
| 62 |
|
|
[^:]*:52: Error: lo register required -- `orr r8,r0'
|
| 63 |
|
|
[^:]*:52: Error: lo register required -- `orr r0,r8'
|
| 64 |
|
|
[^:]*:52: Error: unshifted register required -- `orr r0,#12'
|
| 65 |
|
|
[^:]*:52: Error: unshifted register required -- `orr r0,r1,lsl#2'
|
| 66 |
|
|
[^:]*:52: Error: unshifted register required -- `orr r0,r1,lsl r3'
|
| 67 |
|
|
[^:]*:53: Error: dest and source1 must be the same register -- `sbc r1,r2,r3'
|
| 68 |
|
|
[^:]*:53: Error: lo register required -- `sbc r8,r0'
|
| 69 |
|
|
[^:]*:53: Error: lo register required -- `sbc r0,r8'
|
| 70 |
|
|
[^:]*:53: Error: unshifted register required -- `sbc r0,#12'
|
| 71 |
|
|
[^:]*:53: Error: unshifted register required -- `sbc r0,r1,lsl#2'
|
| 72 |
|
|
[^:]*:53: Error: unshifted register required -- `sbc r0,r1,lsl r3'
|
| 73 |
|
|
[^:]*:54: Error: dest must overlap one source register -- `mul r1,r2,r3'
|
| 74 |
|
|
[^:]*:54: Error: lo register required -- `mul r8,r0'
|
| 75 |
|
|
[^:]*:54: Error: lo register required -- `mul r0,r8'
|
| 76 |
|
|
[^:]*:62: Error: lo register required -- `asr r8,r0,#12'
|
| 77 |
|
|
[^:]*:62: Error: lo register required -- `asr r0,r8,#12'
|
| 78 |
|
|
[^:]*:62: Error: lo register required -- `asr r8,r0'
|
| 79 |
|
|
[^:]*:62: Error: lo register required -- `asr r0,r8'
|
| 80 |
|
|
[^:]*:63: Error: lo register required -- `lsl r8,r0,#12'
|
| 81 |
|
|
[^:]*:63: Error: lo register required -- `lsl r0,r8,#12'
|
| 82 |
|
|
[^:]*:63: Error: lo register required -- `lsl r8,r0'
|
| 83 |
|
|
[^:]*:63: Error: lo register required -- `lsl r0,r8'
|
| 84 |
|
|
[^:]*:64: Error: lo register required -- `lsr r8,r0,#12'
|
| 85 |
|
|
[^:]*:64: Error: lo register required -- `lsr r0,r8,#12'
|
| 86 |
|
|
[^:]*:64: Error: lo register required -- `lsr r8,r0'
|
| 87 |
|
|
[^:]*:64: Error: lo register required -- `lsr r0,r8'
|
| 88 |
|
|
[^:]*:65: Error: lo register required -- `ror r8,r0,#12'
|
| 89 |
|
|
[^:]*:65: Error: lo register required -- `ror r0,r8,#12'
|
| 90 |
|
|
[^:]*:65: Error: lo register required -- `ror r8,r0'
|
| 91 |
|
|
[^:]*:65: Error: lo register required -- `ror r0,r8'
|
| 92 |
|
|
[^:]*:66: Error: ror #imm not supported -- `ror r0,r1,#12'
|
| 93 |
|
|
[^:]*:69: Error: unshifted register required -- `add r0,r1,lsl#2'
|
| 94 |
|
|
[^:]*:70: Error: unshifted register required -- `add r0,r1,lsl r3'
|
| 95 |
|
|
[^:]*:71: Error: lo register required -- `add r8,r0,#1'
|
| 96 |
|
|
[^:]*:72: Error: lo register required -- `add r0,r8,#1'
|
| 97 |
|
|
[^:]*:73: Error: lo register required -- `add r8,#10'
|
| 98 |
|
|
[^:]*:74: Error: dest must overlap one source register -- `add r8,r1,r2'
|
| 99 |
|
|
[^:]*:75: Error: dest must overlap one source register -- `add r1,r8,r2'
|
| 100 |
|
|
[^:]*:76: Error: dest must overlap one source register -- `add r1,r2,r8'
|
| 101 |
|
|
[^:]*:77: Error: lo register required -- `add r8,pc,#4'
|
| 102 |
|
|
[^:]*:78: Error: lo register required -- `add r8,sp,#4'
|
| 103 |
|
|
[^:]*:80: Error: lo register required -- `sub r8,r0'
|
| 104 |
|
|
[^:]*:80: Error: lo register required -- `sub r0,r8'
|
| 105 |
|
|
[^:]*:80: Error: unshifted register required -- `sub r0,r1,lsl#2'
|
| 106 |
|
|
[^:]*:80: Error: unshifted register required -- `sub r0,r1,lsl r3'
|
| 107 |
|
|
[^:]*:81: Error: lo register required -- `sub r8,r0,#1'
|
| 108 |
|
|
[^:]*:82: Error: lo register required -- `sub r0,r8,#1'
|
| 109 |
|
|
[^:]*:83: Error: lo register required -- `sub r8,#10'
|
| 110 |
|
|
[^:]*:84: Error: lo register required -- `sub r8,r1,r2'
|
| 111 |
|
|
[^:]*:85: Error: lo register required -- `sub r1,r8,r2'
|
| 112 |
|
|
[^:]*:86: Error: lo register required -- `sub r1,r2,r8'
|
| 113 |
|
|
[^:]*:88: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `cmp r0,r1,lsl#2'
|
| 114 |
|
|
[^:]*:89: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `cmp r0,r1,lsl r3'
|
| 115 |
|
|
[^:]*:90: Error: only lo regs allowed with immediate -- `cmp r8,#255'
|
| 116 |
|
|
[^:]*:92: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `mov r0,r1,lsl#2'
|
| 117 |
|
|
[^:]*:93: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `mov r0,r1,lsl r3'
|
| 118 |
|
|
[^:]*:94: Error: only lo regs allowed with immediate -- `mov r8,#255'
|
| 119 |
|
|
[^:]*:106: Error: lo register required -- `ldr r8,\[r0\]'
|
| 120 |
|
|
[^:]*:106: Error: lo register required -- `ldr r0,\[r8\]'
|
| 121 |
|
|
[^:]*:106: Error: lo register required -- `ldr r0,\[r0,r8\]'
|
| 122 |
|
|
[^:]*:106: Error: Thumb does not support this addressing mode -- `ldr r0,\[r1,#4\]!'
|
| 123 |
|
|
[^:]*:106: Error: Thumb does not support this addressing mode -- `ldr r0,\[r1\],#4'
|
| 124 |
|
|
[^:]*:106: Error: Thumb does not support this addressing mode -- `ldr r0,\[r1,-r2\]'
|
| 125 |
|
|
[^:]*:106: Error: Thumb does not support this addressing mode -- `ldr r0,\[r1\],r2'
|
| 126 |
|
|
[^:]*:107: Error: lo register required -- `ldrb r8,\[r0\]'
|
| 127 |
|
|
[^:]*:107: Error: lo register required -- `ldrb r0,\[r8\]'
|
| 128 |
|
|
[^:]*:107: Error: lo register required -- `ldrb r0,\[r0,r8\]'
|
| 129 |
|
|
[^:]*:107: Error: Thumb does not support this addressing mode -- `ldrb r0,\[r1,#4\]!'
|
| 130 |
|
|
[^:]*:107: Error: Thumb does not support this addressing mode -- `ldrb r0,\[r1\],#4'
|
| 131 |
|
|
[^:]*:107: Error: Thumb does not support this addressing mode -- `ldrb r0,\[r1,-r2\]'
|
| 132 |
|
|
[^:]*:107: Error: Thumb does not support this addressing mode -- `ldrb r0,\[r1\],r2'
|
| 133 |
|
|
[^:]*:108: Error: lo register required -- `ldrh r8,\[r0\]'
|
| 134 |
|
|
[^:]*:108: Error: lo register required -- `ldrh r0,\[r8\]'
|
| 135 |
|
|
[^:]*:108: Error: lo register required -- `ldrh r0,\[r0,r8\]'
|
| 136 |
|
|
[^:]*:108: Error: Thumb does not support this addressing mode -- `ldrh r0,\[r1,#4\]!'
|
| 137 |
|
|
[^:]*:108: Error: Thumb does not support this addressing mode -- `ldrh r0,\[r1\],#4'
|
| 138 |
|
|
[^:]*:108: Error: Thumb does not support this addressing mode -- `ldrh r0,\[r1,-r2\]'
|
| 139 |
|
|
[^:]*:108: Error: Thumb does not support this addressing mode -- `ldrh r0,\[r1\],r2'
|
| 140 |
|
|
[^:]*:109: Error: lo register required -- `ldrsb r8,\[r0\]'
|
| 141 |
|
|
[^:]*:109: Error: lo register required -- `ldrsb r0,\[r8\]'
|
| 142 |
|
|
[^:]*:109: Error: lo register required -- `ldrsb r0,\[r0,r8\]'
|
| 143 |
|
|
[^:]*:109: Error: Thumb does not support this addressing mode -- `ldrsb r0,\[r1,#4\]!'
|
| 144 |
|
|
[^:]*:109: Error: Thumb does not support this addressing mode -- `ldrsb r0,\[r1\],#4'
|
| 145 |
|
|
[^:]*:109: Error: Thumb does not support this addressing mode -- `ldrsb r0,\[r1,-r2\]'
|
| 146 |
|
|
[^:]*:109: Error: Thumb does not support this addressing mode -- `ldrsb r0,\[r1\],r2'
|
| 147 |
|
|
[^:]*:110: Error: lo register required -- `ldrsh r8,\[r0\]'
|
| 148 |
|
|
[^:]*:110: Error: lo register required -- `ldrsh r0,\[r8\]'
|
| 149 |
|
|
[^:]*:110: Error: lo register required -- `ldrsh r0,\[r0,r8\]'
|
| 150 |
|
|
[^:]*:110: Error: Thumb does not support this addressing mode -- `ldrsh r0,\[r1,#4\]!'
|
| 151 |
|
|
[^:]*:110: Error: Thumb does not support this addressing mode -- `ldrsh r0,\[r1\],#4'
|
| 152 |
|
|
[^:]*:110: Error: Thumb does not support this addressing mode -- `ldrsh r0,\[r1,-r2\]'
|
| 153 |
|
|
[^:]*:110: Error: Thumb does not support this addressing mode -- `ldrsh r0,\[r1\],r2'
|
| 154 |
|
|
[^:]*:111: Error: lo register required -- `str r8,\[r0\]'
|
| 155 |
|
|
[^:]*:111: Error: lo register required -- `str r0,\[r8\]'
|
| 156 |
|
|
[^:]*:111: Error: lo register required -- `str r0,\[r0,r8\]'
|
| 157 |
|
|
[^:]*:111: Error: Thumb does not support this addressing mode -- `str r0,\[r1,#4\]!'
|
| 158 |
|
|
[^:]*:111: Error: Thumb does not support this addressing mode -- `str r0,\[r1\],#4'
|
| 159 |
|
|
[^:]*:111: Error: Thumb does not support this addressing mode -- `str r0,\[r1,-r2\]'
|
| 160 |
|
|
[^:]*:111: Error: Thumb does not support this addressing mode -- `str r0,\[r1\],r2'
|
| 161 |
|
|
[^:]*:112: Error: lo register required -- `strb r8,\[r0\]'
|
| 162 |
|
|
[^:]*:112: Error: lo register required -- `strb r0,\[r8\]'
|
| 163 |
|
|
[^:]*:112: Error: lo register required -- `strb r0,\[r0,r8\]'
|
| 164 |
|
|
[^:]*:112: Error: Thumb does not support this addressing mode -- `strb r0,\[r1,#4\]!'
|
| 165 |
|
|
[^:]*:112: Error: Thumb does not support this addressing mode -- `strb r0,\[r1\],#4'
|
| 166 |
|
|
[^:]*:112: Error: Thumb does not support this addressing mode -- `strb r0,\[r1,-r2\]'
|
| 167 |
|
|
[^:]*:112: Error: Thumb does not support this addressing mode -- `strb r0,\[r1\],r2'
|
| 168 |
|
|
[^:]*:113: Error: lo register required -- `strh r8,\[r0\]'
|
| 169 |
|
|
[^:]*:113: Error: lo register required -- `strh r0,\[r8\]'
|
| 170 |
|
|
[^:]*:113: Error: lo register required -- `strh r0,\[r0,r8\]'
|
| 171 |
|
|
[^:]*:113: Error: Thumb does not support this addressing mode -- `strh r0,\[r1,#4\]!'
|
| 172 |
|
|
[^:]*:113: Error: Thumb does not support this addressing mode -- `strh r0,\[r1\],#4'
|
| 173 |
|
|
[^:]*:113: Error: Thumb does not support this addressing mode -- `strh r0,\[r1,-r2\]'
|
| 174 |
|
|
[^:]*:113: Error: Thumb does not support this addressing mode -- `strh r0,\[r1\],r2'
|
| 175 |
|
|
[^:]*:115: Error: Thumb does not support this addressing mode -- `ldr r0,\[r1,r2,lsl#1\]'
|
| 176 |
|
|
[^:]*:116: Error: Thumb does not support this addressing mode -- `str r0,\[r1,r2,lsl#1\]'
|
| 177 |
|
|
[^:]*:119: Error: lo register required -- `ldmia r8!,{r1,r2}'
|
| 178 |
|
|
[^:]*:120: Error: lo register required -- `ldmia r7!,{r8}'
|
| 179 |
|
|
[^:]*:121: Warning: this instruction will write back the base register
|
| 180 |
|
|
[^:]*:122: Warning: this instruction will not write back the base register
|
| 181 |
|
|
[^:]*:124: Error: lo register required -- `stmia r8!,{r1,r2}'
|
| 182 |
|
|
[^:]*:125: Error: lo register required -- `stmia r7!,{r8}'
|
| 183 |
|
|
[^:]*:126: Warning: this instruction will write back the base register
|
| 184 |
|
|
[^:]*:127: Warning: value stored for r7 is UNPREDICTABLE
|
| 185 |
|
|
[^:]*:129: Error: invalid register list to push/pop instruction -- `push {r8,r9}'
|
| 186 |
|
|
[^:]*:130: Error: invalid register list to push/pop instruction -- `pop {r8,r9}'
|
| 187 |
|
|
[^:]*:133: Error: immediate value out of range -- `bkpt #257'
|
| 188 |
|
|
[^:]*:134: Error: Thumb does not support the 2-argument form of this instruction -- `cpsie ai,#5'
|
| 189 |
|
|
[^:]*:135: Error: Thumb does not support the 2-argument form of this instruction -- `cpsid ai,#5'
|
| 190 |
|
|
[^:]*:138: Error: Thumb does not support conditional execution
|
| 191 |
|
|
[^:]*:141: Error: cannot honor width suffix -- `add r0,r1'
|
| 192 |
|
|
[^:]*:145: Error: lo register required -- `mul r0,r0,r8'
|
| 193 |
|
|
[^:]*:146: Error: lo register required -- `mul r0,r8,r0'
|
| 194 |
|
|
[^:]*:147: Error: dest must overlap one source register -- `mul r8,r0,r0'
|
