Subversion Repositories openrisc_2011-10-31

#

# Some generic MIPS tests

#

# When adding a new test to this file, try to do the following things:

#

# * If testing assembly and disassembly of code, don't forget to test

# the actual bit encodings of the instructions (using the

# --show-raw-insn flag to objdump).

#

# * Try to run the test for as many architectures as appropriate,

# using the "run_dump_test_arches" or "run_list_test_arches" functions,

# along with the output from a call to "mips_arch_list_matching."

#

# * Be sure to compare the test output before and after your testsuite

# changes, to verify that existing and new tests were run as expected.

# Look for expect ERROR messages in the testsuite .log file to make sure

# the new expect code did not contain errors.

# To add support for a new CPU to this file, add an appropriate entry

# to the sequence of "mips_arch_create" function calls below, and test

# the result.  The new CPU should automatically be used when running

# various tests.  If the new CPU is the default CPU for any tool

# targets, make sure the call to "mips_arch_create" reflects that fact.

# "LOSE" marks information about tests which fail at a particular point

# in time, but which are not XFAILed.  Either they used to pass

# and indicate either regressions or the need to tweak the tests to keep

# up the with code, or they are new tests and it is unknown whether or not

# they should pass as-is for the given object formats.

# The functions below create and manipulate an "architecture data

# array" which contains entries for each MIPS architecture (or CPU)

# known to these tests.  The array contains the following information

# for each architecture, indexed by the name of the architecture

# described by the entry:

#

# displayname: The name of the entry to be used for pretty-printing.

#

# gprsize: The size in bits of General Purpose Registers provided by

# the architecture (must be 32 or 64).

#

# props: A list of text strings which are associated with the

# architecture.  These include the architecture name as well as

# information about what instructions the CPU supports.  When matching

# based on properties, an additional property is added to the normal

# property list, "gpr" so that tests can match CPUs which

# have GPRs of a specific size.  The following properties are most

# useful when matching properties for generic (i.e., not CPU-specific)

# tests:

#

#       mips1, mips2, mips3, mips4, mips5, mips32, mips64

#               The architecture includes the instructions defined

#               by that MIPS ISA.

#

#       gpr_ilocks

#               The architecture interlocks GPRs accesses.  (That is,

#               there are no load delay slots.)

#

#       mips3d  The architecture includes the MIPS-3D ASE.

#

#       ror     The architecture includes hardware rotate instructions.

#

#       gpr32, gpr64

#               The architecture provides 32- or 64-bit General Purpose

#               Registers.

#

# as_flags: The assembler flags used when assembling tests for this

# architecture.

#

# objdump_flags: The objdump flags used when disassembling tests for

# this architecture.

#

# Most entries in the architecture array will have values in all of

# the fields above.  One entry, "default" represents the default CPU

# based on the target of the assembler being built.  If always has

# empty "as_flags" and "objdump_flags."

# mips_arch_init

#

# This function initializes the architecture data array ("mips_arches")

# to be empty.

proc mips_arch_init {} {

    global mips_arches

    # Catch becuase the variable won't be set the first time through.

    catch {unset mips_arches}

}

# mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \

#                  (optional:) DEFAULT_FOR_TARGETS

#

# This function creates a new entry in the architecture data array,

# for the architecture or CPU named ARCH, and fills in the entry

# according to the rest of the arguments.

#

# The new entry's property list is initialized to contain ARCH, any

# properties specified by PROPS, and the properties associated with

# the entry specified by EXTENDS.  (The new architecture is considered

# to extend the capabilities provided by that architecture.)

#

# If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which

# this architecture is the default architecture.  If "istarget" returns

# true for any of the targets in the list, a "default" entry will be

# added to the architecture array which indicates that ARCH is the default

# architecture.

proc mips_arch_create {arch gprsize extends props as_flags objdump_flags

                       {default_for_targets {}}} {

    global mips_arches

    if { [info exists mips_arches($arch)] } {

             error "mips_arch_create: arch \"$arch\" already exists"

    }

    if { $gprsize != 32 && $gprsize != 64 } {

        error "mips_arch_create: invalid GPR size $gprsize"

    }

    set archdata(displayname) $arch

    set archdata(gprsize) $gprsize

    set archdata(as_flags) $as_flags

    set archdata(objdump_flags) $objdump_flags

    set archdata(props) $arch

    eval lappend archdata(props) $props

    if { [string length $extends] != 0 } {

        eval lappend archdata(props) [mips_arch_properties $extends 0]

    }

    set mips_arches($arch) [array get archdata]

    # Set as default if appropriate.

    foreach target $default_for_targets {

        if { [istarget $target] } {

            if { [info exists mips_arches(default)] } {

                error "mips_arch_create: default arch already exists"

            }

            set archdata(displayname) "default = $arch"

            set archdata(as_flags) ""

            set archdata(objdump_flags) ""

            set mips_arches(default) [array get archdata]

            break

        }

    }

}

# mips_arch_list_all

#

# This function returns the list of all names of entries in the

# architecture data array (including the default entry, if a default

# is known).

proc mips_arch_list_all {} {

    global mips_arches

    return [lsort -dictionary [array names mips_arches]]

}

# mips_arch_data ARCH

#

# This function returns the information associated with ARCH

# in the architecture data array, in "array get" form.

proc mips_arch_data {arch} {

    global mips_arches

    if { ! [info exists mips_arches($arch)] } {

        error "mips_arch_data: unknown arch \"$arch\""

    }

    return $mips_arches($arch)

}

# mips_arch_displayname ARCH

#

# This function returns the printable name associated with ARCH in

# the architecture data array.

proc mips_arch_displayname {arch} {

    array set archdata [mips_arch_data $arch]

    return $archdata(displayname)

}

# mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE

#

# This function returns the property list associated with ARCH in the

# architecture data array.  If INCLUDE_GPRSIZE is non-zero, an additional

# "gpr32" or "gpr64" property will be returned as part of the list based

# on the architecture's GPR size.

proc mips_arch_properties {arch {include_gprsize 1}} {

    array set archdata [mips_arch_data $arch]

    set props $archdata(props)

    if { $include_gprsize } {

        lappend props gpr$archdata(gprsize)

    }

    return $props

}

# mips_arch_as_flags ARCH

#

# This function returns the assembler flags associated with ARCH in

# the architecture data array.

proc mips_arch_as_flags {arch} {

    array set archdata [mips_arch_data $arch]

    return $archdata(as_flags)

}

# mips_arch_objdump_flags ARCH

#

# This function returns the objdump disassembly flags associated with

# ARCH in the architecture data array.

proc mips_arch_objdump_flags {arch} {

    array set archdata [mips_arch_data $arch]

    return $archdata(objdump_flags)

}

# mips_arch_matches ARCH PROPMATCHLIST

#

# This function returns non-zero if ARCH matches the set of properties

# described by PROPMATCHLIST.  Each entry in PROPMATCHLIST can either

# be the name of a property which must be matched, or "!" followed by

# the name of a property which must not be matched.  ARCH matches

# PROPMATCHLIST if and only if all of the conditions specified by

# PROPMATCHLIST are satisfied.

proc mips_arch_matches {arch propmatchlist} {

    foreach pm $propmatchlist {

        if { [string match {!*} $pm] } {

            # fail if present.

            set inverted 1

            set p [string range $pm 1 end]

        } {

            # fail if not present.

            set inverted 0

            set p $pm

        }

        set loc [lsearch -exact [mips_arch_properties $arch] $p]

        # required-absent and found, or required-present and not found: fail.

        if { ($inverted && $loc != -1) || (! $inverted && $loc == -1) } {

            return 0

        }

    }

    return 1

}

# mips_arch_list_matching ARGS

#

# This function returns a list of all architectures which match

# the conditions described by its arguments.  Its arguments are

# taken as a list and used as the PROPMATCHLIST in a call to

# "mips_arch_matches" for each known architecture.

proc mips_arch_list_matching {args} {

    set l ""

    foreach arch [mips_arch_list_all] {

        # For now, don't match default arch until we know what its

        # properties actually are.

        if { [string compare $arch default] == 0

             && [string length [mips_arch_properties default]] == 0} {

            continue

        }

        if { [mips_arch_matches $arch $args] } {

            lappend l $arch

        }

    }

    return $l

}

# The functions below facilitate running various types of tests.

# run_dump_test_arch NAME ARCH

#

# Invoke "run_dump_test" for test NAME, with extra assembler and

# disassembler flags to test architecture ARCH.

proc run_dump_test_arch { name arch } {

    global subdir

    if [catch {run_dump_test $name \

                             "{name    {([mips_arch_displayname $arch])}}

                              {objdump {[mips_arch_objdump_flags $arch]}}

                              {as      {[mips_arch_as_flags $arch]}}"} rv] {

        perror "$rv"

        untested "$subdir/$name ($arch)"

    }

}

# run_dump_test_arches NAME ARCH_LIST

#

# Invoke "run_dump_test_arch" for test NAME, for each architecture

# listed in ARCH_LIST.

proc run_dump_test_arches { name arch_list } {

    foreach arch $arch_list {

        run_dump_test_arch "$name" "$arch"

    }

}

# run_list_test_arch NAME OPTS ARCH

#

# Invoke "run_list_test" for test NAME with options OPTS, with extra

# assembler flags to test architecture ARCH.

proc run_list_test_arch { name opts arch } {

    global subdir

    set testname "MIPS $name ([mips_arch_displayname $arch])"

    if [catch {run_list_test "$name" "$opts [mips_arch_as_flags $arch]" \

                             "$testname"} rv] {

        perror "$rv"

        untested "$testname"

    }

}

# run_list_test_arches NAME OPTS ARCH_LIST

#

# Invoke "run_list_test_arch" for test NAME with options OPTS, for each

# architecture listed in ARCH_LIST.

proc run_list_test_arches { name opts arch_list } {

    foreach arch $arch_list {

        run_list_test_arch "$name" "$opts" "$arch"

    }

}

# Create the architecture data array by providing data for all

# known architectures.

#

# Note that several targets pick default CPU based on ABI.  We

# can't easily handle that; do NOT list those targets as defaulting

# to any architecture.

mips_arch_init

mips_arch_create mips1  32      {}      {} \

                        { -march=mips1 -mtune=mips1 } { -mmips:3000 }

mips_arch_create mips2  32      mips1   { gpr_ilocks } \

                        { -march=mips2 -mtune=mips2 } { -mmips:6000 }

mips_arch_create mips3  64      mips2   {} \

                        { -march=mips3 -mtune=mips3 } { -mmips:4000 }

mips_arch_create mips4  64      mips3   {} \

                        { -march=mips4 -mtune=mips4 } { -mmips:8000 }

mips_arch_create mips5  64      mips4   {} \

                        { -march=mips5 -mtune=mips5 } { -mmips:mips5 }

mips_arch_create mips32 32      mips2   {} \

                        { -march=mips32 -mtune=mips32 } { -mmips:isa32 } \

                        { mipsisa32-*-* mipsisa32el-*-* }

mips_arch_create mips32r2 32    mips32  { ror } \

                        { -march=mips32r2 -mtune=mips32r2 } \

                        { -mmips:isa32r2 } \

                        { mipsisa32r2-*-* mipsisa32r2el-*-* }

mips_arch_create mips64 64      mips5   { mips32 } \

                        { -march=mips64 -mtune=mips64 } { -mmips:isa64 } \

                        { mipsisa64-*-* mipsisa64el-*-* }

mips_arch_create mips64r2 64    mips64  { mips32r2 ror } \

                        { -march=mips64r2 -mtune=mips64r2 } \

                        { -mmips:isa64r2 } \

                        { mipsisa64r2-*-* mipsisa64r2el-*-* }

mips_arch_create r3000  32      mips1   {} \

                        { -march=r3000 -mtune=r3000 } { -mmips:3000 }

mips_arch_create r3900  32      mips1   { gpr_ilocks } \

                        { -march=r3900 -mtune=r3900 } { -mmips:3900 } \

                        { mipstx39-*-* mipstx39el-*-* }

mips_arch_create r4000  64      mips3   {} \

                        { -march=r4000 -mtune=r4000 } { -mmips:4000 }

mips_arch_create vr5400 64      mips4   { ror } \

                        { -march=vr5400 -mtune=vr5400 } { -mmips:5400 }

mips_arch_create sb1    64      mips64  { mips3d } \

                        { -march=sb1 -mtune=sb1 } { -mmips:sb1 } \

                        { mipsisa64sb1-*-* mipsisa64sb1el-*-* }

mips_arch_create octeon 64      mips64r2 {} \

                        { -march=octeon -mtune=octeon } { -mmips:octeon } \

                        { mips64octeon*-*-* }

mips_arch_create xlr    64      mips64  {} \

                        { -march=xlr -mtune=xlr } { -mmips:xlr }

#

# And now begin the actual tests!  VxWorks uses RELA rather than REL

# relocations, so most of the generic dump tests will not work there.

#

if { [istarget mips*-*-vxworks*] } {

    run_dump_test "vxworks1"

    run_dump_test "vxworks1-xgot"

    run_dump_test "vxworks1-el"

    run_dump_test "vxworks1-xgot-el"

} elseif { [istarget mips*-*-*] } {

    set no_mips16 0

    set elf [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] || [istarget *-*-netbsd*] ]

    set ecoff [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]

    set aout [expr [istarget *-*-bsd*] || [istarget *-*-openbsd*] ]

    set gpr_ilocks [expr [istarget mipstx39*-*-*]]

    set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*] || [istarget mips*-*-ecoff]]

    set has_newabi [expr [istarget *-*-irix6*] || [istarget mips64*-*-linux*]]

    if { [istarget "mips*-*-*linux*"] || [istarget "mips*-sde-elf*"] } then {

        set tmips "t"

    } else {

        set tmips ""

    }

    if [istarget mips*el-*-*] {

        set el "el"

    } {

        set el ""

    }

    if { $ecoff } {

        set no_mips16 1

    }

    run_dump_test_arches "abs"          [mips_arch_list_matching mips1]

    run_dump_test_arches "add"          [mips_arch_list_matching mips1]

    run_dump_test_arches "and"          [mips_arch_list_matching mips1]

    run_dump_test_arches "mips1-fp"     [mips_arch_list_matching mips1]

    run_list_test_arches "mips1-fp" "-32 -msoft-float" \

                                        [mips_arch_list_matching mips1]

    run_dump_test "break20"

    run_dump_test "trap20"

    # LOSE: As of 2002-02-08, "beq" through "bltu" fail for target mips-ecoff.

    # See http://sources.redhat.com/ml/binutils/2001-10/msg00418.html for

    # more information.  Not sure if the fixes there are correct; should

    # branches to external labels be allowed for ECOFF?

    # XXX FIXME: the following tests require -mips2 disasm for

    # branch-likely instructions.  They should be split.

    run_dump_test_arches "beq"          [mips_arch_list_matching mips2]

    run_dump_test_arches "bge"          [mips_arch_list_matching mips2]

    run_dump_test_arches "bgeu"         [mips_arch_list_matching mips2]

    run_dump_test_arches "blt"          [mips_arch_list_matching mips2]

    run_dump_test_arches "bltu"         [mips_arch_list_matching mips2]

    run_dump_test_arches "branch-misc-1" [mips_arch_list_matching mips1]

    run_dump_test_arches "branch-misc-2" [mips_arch_list_matching mips1]

    run_dump_test_arches "branch-misc-2pic" [mips_arch_list_matching mips1]

    run_dump_test_arches "branch-misc-2-64" [mips_arch_list_matching mips3]

    run_dump_test_arches "branch-misc-2pic-64" [mips_arch_list_matching mips3]

    run_dump_test "branch-misc-3"

    run_dump_test "branch-swap"

    run_dump_test "div"

    if { !$addr32 } {

        run_dump_test_arches "dli"              [mips_arch_list_matching mips3]

    }

    if $elf {

        run_dump_test_arches "elf-jal"  [mips_arch_list_matching mips1]

    } else {

        run_dump_test "jal"

    }

    run_dump_test "eret-1"

    run_dump_test "eret-2"

    run_dump_test "eret-3"

    if $elf { run_dump_test "jal-svr4pic" }

    if $elf { run_dump_test "jal-xgot" }

    run_list_test_arches "jal-range" "-32" [mips_arch_list_matching mips1]

    if $has_newabi { run_dump_test "jal-newabi" }

    if !$aout { run_dump_test "la" }

    if $elf { run_dump_test "la-svr4pic" }

    if $elf { run_dump_test "la-xgot" }

    if $elf { run_dump_test "lca-svr4pic" }

    if $elf { run_dump_test "lca-xgot" }

    if !$aout {

        # XXX FIXME: Has mips2 and later insns with mips1 disassemblies.

        # (Should split and then use appropriate arch lists.)

        run_dump_test_arches "lb"       [mips_arch_list_matching !mips2]

    }

    if $elf {

        run_dump_test_arches "lb-svr4pic" [mips_arch_list_matching !gpr_ilocks]

        run_dump_test_arches "lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks]

    }

    if $elf {

        # Both versions specify the cpu, so we can run both regardless of

        # the interlocking in the configured default cpu.

        run_dump_test "lb-xgot"

        run_dump_test "lb-xgot-ilocks"

    }

    if !$aout {

        if !$gpr_ilocks {

            run_dump_test "ld"

        } else {

            if !$addr32 {

                run_dump_test "ld-ilocks"

            } else {

                run_dump_test "ld-ilocks-addr32"

            }

        }

    }

    if $elf { run_dump_test "ld-svr4pic" }

    if $elf { run_dump_test "ld-xgot" }

    run_dump_test_arches "li"           [mips_arch_list_matching mips1]

    if !$aout { run_dump_test "lifloat" }

    if $elf { run_dump_test "lif-svr4pic" }

    if $elf { run_dump_test "lif-xgot" }

    run_dump_test_arches "mips4"        [mips_arch_list_matching mips4]

    run_dump_test_arches "mips4-fp"     [mips_arch_list_matching mips4]

    run_list_test_arches "mips4-fp" "-32 -msoft-float" \

                                        [mips_arch_list_matching mips4]

    run_dump_test_arches "mips5"        [mips_arch_list_matching mips5]

    run_dump_test "mul"

    run_dump_test_arches "rol"          [mips_arch_list_matching !ror]

    run_dump_test_arches "rol-hw"       [mips_arch_list_matching ror]

    run_dump_test_arches "rol64"        [mips_arch_list_matching gpr64 !ror]

    run_dump_test_arches "rol64-hw"     [mips_arch_list_matching gpr64 ror]

    if !$aout { run_dump_test "sb" }

    run_dump_test "trunc"

    if !$aout { run_dump_test "ulh" }

    run_dump_test_arches "ulh2-eb"      [mips_arch_list_matching mips1]

    run_dump_test_arches "ulh2-el"      [mips_arch_list_matching mips1]

    if $elf { run_dump_test "ulh-svr4pic" }

    if $elf { run_dump_test "ulh-xgot" }

    if !$aout {

        run_dump_test "ulw"

        run_dump_test "uld"

        run_dump_test "ush"

        run_dump_test "usw"

        run_dump_test "usd"

    }

    run_dump_test_arches "ulw2-eb"      [mips_arch_list_matching !gpr_ilocks]

    run_dump_test_arches "ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks]

    run_dump_test_arches "ulw2-el"      [mips_arch_list_matching !gpr_ilocks]

    run_dump_test_arches "ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks]

    run_dump_test_arches "uld2-eb" [mips_arch_list_matching mips3]

    run_dump_test_arches "uld2-el" [mips_arch_list_matching mips3]

    # The mips16 test can only be run on ELF, because only ELF

    # supports the necessary mips16 reloc.

    if { $elf && !$no_mips16 } {

        run_dump_test "mips16"

        run_dump_test "mips16-64"

        # Check MIPS16e extensions

        run_dump_test_arches "mips16e"  [mips_arch_list_matching mips32]

        # Check jalx handling

        run_dump_test "mips16-jalx"

        run_dump_test "mips-jalx"

        # Check MIPS16 HI16/LO16 relocations

        run_dump_test "mips16-hilo"

        if $has_newabi {

            run_dump_test "mips16-hilo-n32"

        }

        run_dump_test "mips16-hilo-match"

    }

    run_list_test "mips-no-jalx" "-32"

    run_dump_test "delay"

    run_dump_test "nodelay"

    run_dump_test "mips4010"

    run_dump_test "mips4650"

    run_dump_test "mips4100"

    run_dump_test "vr4111"

    run_dump_test "vr4120"

    run_dump_test "vr4120-2"

    run_dump_test "vr4130"

    run_dump_test "vr5400"

    run_dump_test "vr5500"

    run_dump_test "rm7000"

    run_dump_test "perfcount"

    run_dump_test "lineno"

    run_dump_test "sync"

    run_dump_test_arches "mips32"       [mips_arch_list_matching mips32]

    run_dump_test_arches "mips32-sf32"  [mips_arch_list_matching mips32]

    run_list_test_arches "mips32-sf32" "-32 -msoft-float" \

                                        [mips_arch_list_matching mips32]

    run_dump_test_arches "mips32-cp2"   [mips_arch_list_matching mips32 \

                                            !octeon]

    run_dump_test_arches "mips32r2"     [mips_arch_list_matching mips32r2]

    run_dump_test_arches "mips32r2-cp2" [mips_arch_list_matching mips32r2 \

                                            !octeon]

    run_dump_test_arches "mips32r2-fp32" \

                                        [mips_arch_list_matching mips32r2]

    run_list_test_arches "mips32r2-fp32" "-32 -msoft-float" \

                                        [mips_arch_list_matching mips32r2]

    run_list_test_arches "mips32r2-ill" "-32" \

                        [mips_arch_list_matching mips32r2 gpr32]

    run_list_test_arches "mips32r2-ill-fp64" "-mabi=o64" \

                        [mips_arch_list_matching mips32r2 gpr64]

    run_list_test_arches "mips32r2-ill-nofp" "-32 -msoft-float" \

                        [mips_arch_list_matching mips32r2]

    run_dump_test_arches "mips64"       [mips_arch_list_matching mips64]

    run_dump_test_arches "mips64-cp2"   [mips_arch_list_matching mips64 \

                                            !octeon]

    run_dump_test_arches "mips64r2"     [mips_arch_list_matching mips64r2]

    run_list_test_arches "mips64r2-ill" "" [mips_arch_list_matching mips64r2]

    run_dump_test "set-arch"

    if { !$addr32 } {

        run_dump_test "mips64-mips3d"

        run_dump_test_arches "mips64-mips3d-incl" [mips_arch_list_matching mips3d]

        run_dump_test "mips64-mdmx"

        run_dump_test "sb1-ext-mdmx"

        run_dump_test "sb1-ext-ps"

        run_dump_test "xlr-ext"

    }

    run_dump_test "relax"

    run_dump_test "relax-swap1-mips1"

    run_dump_test "relax-swap1-mips2"

    run_dump_test "relax-swap2"

    run_list_test "illegal" "-32"

    run_list_test "baddata1" "-32"

    run_list_test "jalr" ""

    # LOSE: As of 2002-02-08, the next 4 tests fail for target mips-ecoff.

    # It's unknown whether they _should_ pass as-is, or whether different

    # variants are needed for ELF and ECOFF.

    run_dump_test "mips-gp32-fp32"

    run_dump_test "mips-gp32-fp64"

    run_dump_test "mips-gp64-fp32"

    run_dump_test "mips-gp64-fp64"

    if $elf {

        # Make sure that -mcpu=FOO and -mFOO are equivalent.  Assemble a file

        # containing 4650-specific instructions with -m4650 and -mcpu=4650,

        # and verify that they're the same.  Specifically, we're checking

        # that the EF_MIPS_MACH field is set, and that the 4650 'mul'

        # instruction does get used.  In previous versions of GAS,

        # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.

        run_dump_test "elf_e_flags1"

        run_dump_test "elf_e_flags2"

        run_dump_test "elf_e_flags3"

        run_dump_test "elf_e_flags4"

        # Check EF_MIPS_ARCH markings for each supported architecture.

        run_dump_test "elf_arch_mips1"

        run_dump_test "elf_arch_mips2"

        run_dump_test "elf_arch_mips3"

        run_dump_test "elf_arch_mips4"

        run_dump_test "elf_arch_mips5"

        run_dump_test "elf_arch_mips32"

        run_dump_test "elf_arch_mips32r2"

        run_dump_test "elf_arch_mips64"

        run_dump_test "elf_arch_mips64r2"

        # Verify that ASE markings are handled properly.

        if { !$no_mips16 } { run_dump_test "elf_ase_mips16" }

        run_dump_test "mips-gp32-fp32-pic"

        run_dump_test "mips-gp32-fp64-pic"

        run_dump_test "mips-gp64-fp32-pic"

        run_dump_test "mips-gp64-fp64-pic"

        run_dump_test "mips-abi32"

        run_dump_test "mips-abi32-pic"

        run_dump_test "mips-abi32-pic2"

        run_dump_test "elf${el}-rel"

        run_dump_test_arches "elf${el}-rel2" [mips_arch_list_matching gpr64]

        run_dump_test "e32${el}-rel2"

        run_dump_test "elf${el}-rel3"

        run_dump_test_arches "elf-rel4" [mips_arch_list_matching gpr64]

        run_dump_test "e32-rel4"

        run_dump_test "elf-rel5"

        run_dump_test "elf-rel6"

        if $has_newabi {

            run_dump_test "elf-rel6-n32"

            run_dump_test "elf-rel6-n64"

        }

        run_dump_test "elf-rel7"

        run_dump_test "elf-rel8"

        run_dump_test "elf-rel8-mips16"

        run_dump_test "elf-rel9"

        run_dump_test "elf-rel9-mips16"

        if $has_newabi {

            run_dump_test "elf-rel10"

            run_dump_test "elf-rel11"

        }

        run_dump_test "elf-rel12"

        run_dump_test "elf-rel13"

        run_dump_test "elf-rel13-mips16"

        run_dump_test "elf-rel14"

        if $has_newabi {

            run_dump_test "elf-rel15"

            run_dump_test "elf-rel16"

            run_dump_test "elf-rel-got-n32"

            run_dump_test "elf-rel-xgot-n32"

            run_dump_test "elf-rel-got-n64"

            run_dump_test "elf-rel-xgot-n64"

        }

        run_dump_test "elf-rel17"

        if $has_newabi {

            run_dump_test "elf-rel18"

        }

        run_dump_test "elf-rel19"

        run_dump_test "elf-rel20"

        if $has_newabi {

            run_dump_test "elf-rel21"

            run_dump_test "elf-rel22"

            run_dump_test "elf-rel23"

            run_dump_test "elf-rel23a"

            run_dump_test "elf-rel23b"

            run_dump_test "elf-rel24"

        }

        run_dump_test "elf-rel25"

        run_dump_test "elf-rel25a"

        run_dump_test "elf-rel26"

        if { !$no_mips16 } {

            run_dump_test "${tmips}mips${el}16-e"

            run_dump_test "${tmips}mips${el}16-f"

        }

        run_dump_test "elf-consthilo"

        run_dump_test "expr1"

        run_list_test "tls-ill" "-32"

        run_dump_test "tls-o32"

        run_dump_test "jalr2"

    }

    if $has_newabi {

        run_dump_test "n32-consec"

    }

    # tests of objdump's ability to disassemble using different

    # register names.

    run_dump_test "gpr-names-numeric"

    run_dump_test "gpr-names-32"

    run_dump_test "gpr-names-n32"

    run_dump_test "gpr-names-64"

    run_dump_test "fpr-names-numeric"

    run_dump_test "fpr-names-32"

    run_dump_test "fpr-names-n32"

    run_dump_test "fpr-names-64"

    run_dump_test "cp0-names-numeric"

    run_dump_test "cp0-names-r3000"

    run_dump_test "cp0-names-r4000" \

                  { { {name} {(r4000)} } { {objdump} {-M cp0-names=r4000} } }

    run_dump_test "cp0-names-r4000" \

                  { { {name} {(r4400)} } { {objdump} {-M cp0-names=r4400} } }

    run_dump_test "cp0-names-mips32"

    run_dump_test "cp0-names-mips32r2"

    run_dump_test "cp0-names-mips64"

    run_dump_test "cp0-names-mips64r2"

    run_dump_test "cp0-names-sb1"

    run_dump_test "cp0sel-names-numeric"

    run_dump_test "cp0sel-names-mips32"

    run_dump_test "cp0sel-names-mips32r2"

    run_dump_test "cp0sel-names-mips64"

    run_dump_test "cp0sel-names-mips64r2"

    run_dump_test "cp0sel-names-sb1"

    run_dump_test "hwr-names-numeric"

    run_dump_test "hwr-names-mips32r2"

    run_dump_test "hwr-names-mips64r2"

    run_dump_test "ldstla-32"

    run_dump_test "ldstla-32-mips3"

    run_dump_test "ldstla-32-shared"

    run_dump_test "ldstla-32-mips3-shared"

    run_list_test "ldstla-32-1" "-mabi=32" \

        "MIPS ld-st-la bad constants (ABI o32)"

    run_list_test "ldstla-32-mips3-1" "-mabi=32" \

        "MIPS ld-st-la bad constants (ABI o32, mips3)"

    run_list_test "ldstla-32-1" "-KPIC -mabi=32" \

        "MIPS ld-st-la bad constants (ABI o32, shared)"

    run_list_test "ldstla-32-mips3-1" "-KPIC -mabi=32" \

        "MIPS ld-st-la bad constants (ABI o32, mips3, shared)"

    run_dump_test "ldstla-eabi64"

    if $has_newabi {

        run_dump_test "ldstla-n64"

        run_dump_test "ldstla-n64-shared"

        run_dump_test "ldstla-n64-sym32"

    }

    run_dump_test "macro-warn-1"

    run_dump_test "macro-warn-2"

    run_dump_test "macro-warn-3"

    run_dump_test "macro-warn-4"

    if $has_newabi {

        run_dump_test "macro-warn-1-n32"

        run_dump_test "macro-warn-2-n32"

    }

    run_dump_test "noat-1"

    run_list_test "noat-2" ""

    run_list_test "noat-3" ""

    run_list_test "noat-4" ""

    run_list_test "noat-5" ""

    run_list_test "noat-6" ""

    run_list_test "noat-7" ""

    run_dump_test "at-1"

    run_list_test "at-2" "-32 -mips1" "MIPS at-2"

    run_dump_test "loongson-2e"

    run_dump_test "loongson-2f"

    run_dump_test_arches "octeon"       [mips_arch_list_matching octeon]

    run_list_test_arches "octeon-ill" "" \

                                        [mips_arch_list_matching octeon]

    run_dump_test "smartmips"

    run_dump_test "mips32-dsp"

    run_dump_test "mips32-dspr2"

    run_dump_test "mips64-dsp"

    run_dump_test "mips32-mt"

    if { $elf && !$no_mips16 } {

        run_dump_test "mips16-dwarf2"

        if $has_newabi {

            run_dump_test "mips16-dwarf2-n32"

        }

    }

    if { !$no_mips16 } {

        run_dump_test "mips16e-jrc"

        run_dump_test "mips16e-save"

        run_dump_test "mips16e-64"

        run_list_test "mips16e-64" "-march=mips32 -32"

        run_dump_test "mips16-intermix"

    }

    run_dump_test "vxworks1"

    run_dump_test "vxworks1-xgot"

    run_dump_test "vxworks1-el"

    run_dump_test "vxworks1-xgot-el"

    run_dump_test "noreorder"

    run_dump_test "align"

    run_dump_test "align2"

    run_dump_test "align2-el"

    run_dump_test "odd-float"

    run_list_test_arches "mips-macro-ill-sfp" "-32 -msingle-float" \

                                        [mips_arch_list_matching mips2]

    run_list_test_arches "mips-macro-ill-nofp" "-32 -msoft-float" \

                                        [mips_arch_list_matching mips2]

    run_list_test_arches "mips-hard-float-flag" \

        "-32 -msoft-float -mhard-float" \

                                        [mips_arch_list_matching mips1]

    run_list_test_arches "mips-double-float-flag" \

        "-32 -msingle-float -mdouble-float" \

                                        [mips_arch_list_matching mips1]

    run_dump_test "mips16-vis-1"

    run_dump_test "call-nonpic-1"

    run_dump_test "mips32-sync"

    if $has_newabi { run_dump_test "cfi-n64-1" }

}