URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [gnu-src/] [boards/] [or32-linux-sim.exp] - Blame information for rev 560

Go to most recent revision | Details | Compare with Previous | View Log


#!/bin/bash
 
# Copyright (C) 2010 Embecosm Limited
 
# Contributor Jeremy Bennett 
# Contributor Joern Rennecke 
 
# This file is a board description for testing OpenRISC with uClibc and
# Or1ksim running Linux.
 
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
 
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
# more details.
 
# You should have received a copy of the GNU General Public License along
# with this program.  If not, see .
 
# -----------------------------------------------------------------------------
# For telnet targets we need to define some functions.
 
# -----------------------------------------------------------------------------
# Custom proc to close a telnet session
 
# @param[in] connhost  The connected host being closed.
# -----------------------------------------------------------------------------
proc telnet_close {connhost} {
 
    verbose "telnet_close: connhost $connhost" 3
 
    # Use the standard close proc from remote.exp
    standard_close $connhost
}
 
 
# -----------------------------------------------------------------------------
# Custom proc to check if we have had too many failures
 
# @param[in] boardname  The board being closed.
# -----------------------------------------------------------------------------
proc telnet_failure_check { connhost errmess } {
    global board_info
 
    # Get the maximum failure count
    set max_fc 10
 
    if [board_info $connhost exists max_failure_count] {
        set max_fc [board_info $connhost max_failure_count]
    }
    verbose "telnet_failure_check: Max failure count $max_fc"
 
    # Increment the current failure count
    set fc 1
    if [board_info $connhost exists failure_count] {
        verbose "telnet_failure_check: Incrementing failure count"
        set fc [expr [board_info $connhost failure_count] + 1]
    }
    set board_info($connhost,failure_count) $fc
    verbose "telnet_failure_check: current failure count is $fc"
 
    # Die if we are over the limit
    if {$fc >= $max_fc} {
        error "Too many failures: $errmess"
    }
}
 
 
# -----------------------------------------------------------------------------
# Custom proc to exec programs using telnet
 
# We seem to only pass in the first of the arguments supplied to the command.
 
# The timeout is a mess. It seems to always be 10, not the timeout needed to
# execute a regression test (typicall 300 seconds). Fixed by not making it
# global and using our own timeout data.
 
# It also seems that only the first argument is passed.
 
# @param[in] hostname  The board we are telnetting to
# @param[in] cmd        The command to run
# @param[in] args       Arguments to the command
 
# @return  A list of the return code (-1 on failure) and any error message.
# -----------------------------------------------------------------------------
proc telnet_exec {hostname cmd args} {
    global timeout
    global board_info
    global verbose
    global spawn_id
 
    # Get the connected host name, if it exists. This code matches
    # telnet_open.
    verbose "telnet_exec: original hostname is $hostname"
 
    if {[board_info $hostname exists name]} {
        set connhost [board_info $hostname name]
    } else {
        set connhost $hostname
    }
    verbose "telnet_exec: connhost is $connhost"
 
    if [board_info $connhost exists hostname] {
        set hostname [board_info $connhost hostname]
    }
    verbose "telnet_exec: hostname is $hostname"
 
    # Get the first argument, if any.
    if { [llength $args] > 0 } {
        set pargs [lindex $args 0];
    } else {
        set pargs ""
    }
 
    verbose "telnet_exec: executing on $connhost, command \"$cmd\", pargs \"$pargs\""
 
    # Just check if we have more args. Potentially a second arg is an input
    # file.
    if { [llength $args] > 1 } {
        set tinp [lindex $args 1]
        if {$tinp != {}} {
            verbose "telnet_exec: long args: $args"
        }
    }
 
    # Set the shell prompt
    if [board_info $connhost exists shell_prompt] {
        set shell_prompt [board_info $connhost shell_prompt]
    } elseif ![info exists shell_prompt] {
        # if no prompt, then set it to something generic
        set shell_prompt "\[^\r\n\]*\[$#\] "
    }
 
    # Start a new telnet session if one doesn't already exist. If sucessful
    # the fileid field associated with $connhost will be set to the spawn_id
    # of the new telnet process.
    if ![board_info $connhost exists fileid] {
        if {[telnet_open $connhost] == -1} {
            return [list -1 "telnet to $hostname failed for $cmd, couldn't begin telnet session"]
        }
    }
 
    # Save the timeout. It's a global, which we shall mess about with, and
    # restore on exit.
    set timeout_orig timeout
 
    # Make the telnet session the current process. Short timeout for this.
    set spawn_id [board_info $connhost fileid]
    set timeout 30
 
    #Hit enter to make sure you get a shell prompt
    send "\r"
 
    expect {
        # A prompt indicates the current session is alive
        -re "$shell_prompt" {
            verbose "telnet_exec: got prompt at start"
        }
        default {
            # Timeout or EOF. Die if we have had too many failures
            telnet_failure_check $connhost "no prompt at telnet start"
 
            # Try closing the connection and reopening.
            telnet_close $connhost
            if {[telnet_open $connhost] != -1} {
                set spawn_id [board_info $connhost fileid]
                verbose "telnet_exec: new telnet session, spawn_id: $spawn_id"
                send "\r"
                exp_continue
            } else {
                set timeout timeout_orig
                return [list -1 "telnet to $hostname failed for $cmd, couldn't get a shell prompt"]
            }
        }
    }
 
    # Send the command. We can't cope with any input, so only the first
    # argument (group) is sent.
    send "$cmd $pargs\r"
 
    # We really should get the command echoed back immediately. This is a good
    # way of slurping up unexpected prompts. We first swap out any characters
    # from the command and args that might cause us grief.
    regsub -all "\\+" "$cmd $pargs" "." cmdpargs
    verbose "telnet_exec: command match string is \"$cmdpargs\""
 
    expect {
        -re "$cmdpargs" {
            verbose "telnet_exec: got command echoed back"
        }
        default {
            verbose "telnet_exec: command not echoed: command expect_out(buffer): \"$expect_out(buffer)\""
        }
    }
 
    # Set the telnet command custom timeout to wait for the command to
    # complete executing.
    if [board_info $connhost exists telnet_exec_timeout] {
        set timeout [board_info $connhost telnet_exec_timeout]
        verbose "telnet_exec: command timeout set to $timeout"
    } else {
        # Appropriate default
        set timeout 300
        verbose "telnet_exec: command timeout set to default value $timeout"
    }
 
    expect {
        -re "$shell_prompt" {
            verbose "telnet_exec: got prompt after command"
        }
        default {
            # Give up on timeout or EOF
            telnet_close $connhost
            set timeout timeout_orig
            return [list -1 "telnet to $hostname for $cmd $pargs failed (timeout)"]
        }
    }
 
    # Remove unnecessary strings from the output string
    verbose "telnet_exec: command expect_out(buffer): \"$expect_out(buffer)\""
    regsub -all $cmdpargs "$expect_out(buffer)" {} output
    regsub "$shell_prompt" $output {} output
    regsub -all "\[\r\n\]" $output {} output
 
    if {$output == ""} {
        set output "(no output)"
    } else {
        set output "\"$output\""
    }
 
    verbose "telnet_exec: command output $output"
 
    # Check the return status. Use a short timeout for this and following
    # commands.
    set timeout 30
    send "echo \$?\r"
 
    # Once again, look for the "echo" reflected back as a way of slurping up
    # unexpected prompts. We don't worry about timeout here - we'll sort that
    # out later.
    expect {
        -re "echo \\$\\?" {
            verbose "telnet_exec: got \"echo\" echoed back"
        }
        default {
            verbose "telnet_exec: echo not echoed: command expect_out(buffer): \"$expect_out(buffer)\""
        }
    }
 
    # Look for the shell prompt. Don't worry about timeout for now. It only
    # really matters if we don't get a valid status, which we'll discover
    # below.
    expect {
        -re "$shell_prompt" {
            verbose "telnet_exec: got status shell prompt"
        }
        default {
            verbose "telnet_exec: no status shell prompt: command expect_out(buffer): \"$expect_out(buffer)\""
        }
    }
 
    # Regsub the output to get the status number
    verbose "telnet_exec: status expect_out(buffer): \"$expect_out(buffer)\""
    regsub -all {echo \$\?} $expect_out(buffer) {} status
    regsub "$shell_prompt" $status {} status
    regsub -all "\[\r\n \]" $status {} status
    verbose "telnet_exec: status \"$status\""
 
    # This shouldn't be neccessary...
    if {[regexp {[0123456789]+} $status] != 1} {
        warning "status not a number (\"$status\"), setting to 1"
        verbose "telnet_exec: status (\"$status\"), expect_out(buffer): \"$expect_out(buffer)\""
        set status 1
 
        # Die if we have had too many failures like this.
        telnet_failure_check $connhost "bad status"
    }
 
    set timeout timeout_orig
    if {$status == 0} {
        return [list "0" "$output"]
    } else {
        return [list "1" "$output"]
    }
}
 
 
# -----------------------------------------------------------------------------
# For FTP we need to redefine some existing functions to add additional
# features.
 
# -----------------------------------------------------------------------------
# Upload REMOTEFILE from HOST as LOCALFILE by FTP
 
# This version swaps the argument order, which is what the regression test
# seems to expect.
 
# Also allows a custom timeout to be set.
 
# @param[in] host        The host we are connected to.
# @param[in] localfile   The local file to send
# @param[in] remotefile  Name of file at remote end.
# -----------------------------------------------------------------------------
proc ftp_upload {host localfile remotefile} {
    global board_info
 
    set prompt "ftp>"
    verbose "ftping $remotefile from $host to $localfile"
 
    # JPB to set custom timeout (not marked global, so we don't need to save
    # and restore)
    if [board_info $host exists ftp_upload_timeout] {
        set timeout [board_info $host ftp_upload_timeout]
        verbose "FTP upload timeout set to $timeout"
    } else {
        # Appropriate default
        set timeout 15
        verbose "FTP upload timeout set to default value $timeout"
    }
 
    set spawn_id [ftp_open $host]
    if {$spawn_id < 0} {
        return ""
    }
    set loop 1
 
    while {$loop} {
        send -i $spawn_id "get $remotefile $localfile\n"
        expect {
            -i $spawn_id -re ".*Too many open files.*$prompt" {
                ftp_close $host
            }
            -i $spawn_id -re ".*No such file or directory.*$prompt" {
                set loop 0
                set remotefile ""
            }
            -i $spawn_id -re "(^|\[\r\n\])226.*$prompt" {set loop 0}
            -i $spawn_id -re "(^|\[\r\n\])\[0-9\]\[0-9\]\[0-9\].*$prompt" {
                set loop 0
                set remotefile ""
            }
            -i $spawn_id default {
                ftp_close $host
            }
        }
        if {$loop} {
            set spawn_id [ftp_open $host]
            if {$spawn_id < 0} {
                return ""
            }
        }
    }
    return $localfile
}
 
 
# -----------------------------------------------------------------------------
# Download LOCALFILE to HOST as REMOTEFILE by FTP
 
# This version takes a user specified timeout, which we need for our slow
# simulated connection.
 
# @param[in] host        The host we are connected to.
# @param[in] localfile   The local file to send
# @param[in] remotefile  Name of file at remote end.
# -----------------------------------------------------------------------------
proc ftp_download {host localfile remotefile} {
    global board_info
 
    set prompt "ftp>"
 
    verbose "putting $localfile $remotefile"
 
    if [board_info $host exists hostname] {
        set remotehost [board_info $host hostname]
    } else {
        set remotehost $host
    }
 
    set spawn_id [ftp_open $host]
    if {$spawn_id < 0} {
        return ""
    }
    set loop 1
 
    # JPB to set custom timeout (not marked global, so we don't need to save
    # and restore)
    if [board_info $host exists ftp_download_timeout] {
        set timeout [board_info $host ftp_download_timeout]
        verbose "FTP download timeout set to $timeout"
    } else {
        # Appropriate default
        set timeout 15
        verbose "FTP download timeout set to default value $timeout"
    }
 
    while {$loop} {
        send -i $spawn_id "put $localfile $remotefile\n"
        expect {
            -i $spawn_id -re ".*Too many open files.*$prompt" {
                ftp_close $host
            }
            -i $spawn_id -re ".*No such file or directory.*$prompt" {
                set loop 0
                set remotefile ""
            }
            -re "(^|\[\r\n\])150.*connection for (.*) \[(\]\[0-9.,\]+\\)\[\r\n\]" {
                set remotefile $expect_out(2,string)
                exp_continue
            }
            -i $spawn_id -re "(^|\[\r\n\])226.*$prompt" {
                set loop 0
            }
            -i $spawn_id -re "Timeout.*$prompt" {
                ftp_close $host
            }
            -i $spawn_id -re "(^|\[\r\n\])\[0-9\]\[0-9\]\[0-9\].*$prompt" {
                set loop 0
                set remotefile ""
            }
            -i $spawn_id default {
                ftp_close $host
            }
        }
        if {$loop} {
            set spawn_id [ftp_open $host]
            if {$spawn_id < 0} {
                return ""
            }
        }
    }
    return $remotefile
}
 
 
# This is a list of toolchains that are supported on this board.
set_board_info target_install {or32-linux}
 
# No multilib options needed by default.
process_multilib_options ""
 
# Load the generic configuration for this board. This will define a basic set
# of routines needed by the tool to communicate with the board.
load_generic_config "unix"
 
# Set up remote target info. We select the IP address using an external
# program which knows about all available Linuxes.
set linux_hostname [exec [file dirname $env(DEJAGNU)]/get-ip.sh --rotate]
set_board_info hostname $linux_hostname
send_user "OR32 target hostname is $linux_hostname\n"
 
set_board_info username root
 
# Use the installed compilers to ensure we get search paths that will find
# uClibc.
send_user "set_board_info compiler /opt/or32-new/bin/or32-linux-gcc\n"
global GCC_UNDER_TEST
set GCC_UNDER_TEST "/opt/or32-new/bin/or32-linux-gcc"
global GXX_UNDER_TEST
set GXX_UNDER_TEST "/opt/or32-new/bin/or32-linux-g++"
set_board_info compiler /opt/or32-new/bin/or32-linux-gcc
set_board_info c++compiler /opt/or32-new/bin/or32-linux-g++
set target_alias "or32-linux"
 
set_board_info connect telnet
set_board_info shell_prompt          "\[^\r\n\]*# "
set_board_info telnet_username       "root"
set_board_info telnet_password       ""
set_board_info telnet_exec_timeout   1200
 
set_board_info file_transfer         ftp
set_board_info ftp_username          root
set_board_info ftp_password          ""
set_board_info ftp_download_timeout  120
set_board_info ftp_upload_timeout    120
 
# Options for the simulator
# set cfg_file [lookfor_file ${srcdir} libgloss/or32/sim.cfg]
#set_board_info sim,options "-a \"-f ${cfg_file}\""
 
# We only support uClibc on this target.  We assume that all multilib options
# have been specified before we get here.
#set_board_info compiler  "[find_gcc]"
 
# We need to define this flag to generate default .gcda files if we are using
# a stock compiler, without the profopt.exp changes. No problem with doubling
# up the argument in normal circumstances.
set_board_info cflags    "-fprofile-dir=."
set_board_info cxxflags  "-fprofile-dir=."
 
# No linker script needed.
set_board_info ldscript ""
 
# This simulator isn't slow.
set_board_info slow_simulator 0
 
# Can't pass arguments to programs on this target..
set_board_info noargs  1
 
# Used by a few gcc.c-torture testcases to delimit how large the stack can
# be.
set_board_info gcc,stack_size 65536
 
# GDB options
 
# We can't do input in GDB (yet! HA!). It *will* do output, hurrah.
set_board_info gdb,noinferiorio 1
# Or pass arguments.
set_board_info gdb,noargs  1
set_board_info noargs 1
# And there's no support for signals.
set_board_info gdb,nosignals  1

Line No.	Rev	Author	Line
1	453	jeremybenn	`#!/bin/bash`
2
3			`# Copyright (C) 2010 Embecosm Limited`
4
5			`# Contributor Jeremy Bennett`
6			`# Contributor Joern Rennecke`
7
8			`# This file is a board description for testing OpenRISC with uClibc and`
9			`# Or1ksim running Linux.`
10
11			`# This program is free software; you can redistribute it and/or modify it`
12			`# under the terms of the GNU General Public License as published by the Free`
13			`# Software Foundation; either version 3 of the License, or (at your option)`
14			`# any later version.`
15
16			`# This program is distributed in the hope that it will be useful, but WITHOUT`
17			`# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or`
18			`# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for`
19			`# more details.`
20
21			`# You should have received a copy of the GNU General Public License along`
22			`# with this program. If not, see .`
23
24	473	jeremybenn	`# -----------------------------------------------------------------------------`
25			`# For telnet targets we need to define some functions.`
26	453	jeremybenn
27	473	jeremybenn	`# -----------------------------------------------------------------------------`
28			`# Custom proc to close a telnet session`
29	453	jeremybenn
30	553	jeremybenn	`# @param[in] connhost The connected host being closed.`
31			`# -----------------------------------------------------------------------------`
32			`proc telnet_close {connhost} {`
33
34			`verbose "telnet_close: connhost $connhost" 3`
35
36			`# Use the standard close proc from remote.exp`
37			`standard_close $connhost`
38			`}`
39
40
41			`# -----------------------------------------------------------------------------`
42			`# Custom proc to check if we have had too many failures`
43
44	473	jeremybenn	`# @param[in] boardname The board being closed.`
45			`# -----------------------------------------------------------------------------`
46	553	jeremybenn	`proc telnet_failure_check { connhost errmess } {`
47	555	jeremybenn	`global board_info`
48	453	jeremybenn
49	553	jeremybenn	`# Get the maximum failure count`
50			`set max_fc 10`
51	548	jeremybenn
52	553	jeremybenn	`if [board_info $connhost exists max_failure_count] {`
53			`set max_fc [board_info $connhost max_failure_count]`
54	490	jeremybenn	`}`
55	553	jeremybenn	`verbose "telnet_failure_check: Max failure count $max_fc"`
56	453	jeremybenn
57	553	jeremybenn	`# Increment the current failure count`
58			`set fc 1`
59			`if [board_info $connhost exists failure_count] {`
60			`verbose "telnet_failure_check: Incrementing failure count"`
61			`set fc [expr [board_info $connhost failure_count] + 1]`
62	548	jeremybenn	`}`
63	553	jeremybenn	`set board_info($connhost,failure_count) $fc`
64	554	jeremybenn	`verbose "telnet_failure_check: current failure count is $fc"`
65	548	jeremybenn
66	553	jeremybenn	`# Die if we are over the limit`
67			`if {$fc >= $max_fc} {`
68			`error "Too many failures: $errmess"`
69			`}`
70	453	jeremybenn	`}`
71
72
73	473	jeremybenn	`# -----------------------------------------------------------------------------`
74	453	jeremybenn	`# Custom proc to exec programs using telnet`
75	473	jeremybenn
76			`# We seem to only pass in the first of the arguments supplied to the command.`
77
78	522	jeremybenn	`# The timeout is a mess. It seems to always be 10, not the timeout needed to`
79	555	jeremybenn	`# execute a regression test (typicall 300 seconds). Fixed by not making it`
80			`# global and using our own timeout data.`
81	473	jeremybenn
82	553	jeremybenn	`# It also seems that only the first argument is passed.`
83
84	490	jeremybenn	`# @param[in] hostname The board we are telnetting to`
85	473	jeremybenn	`# @param[in] cmd The command to run`
86			`# @param[in] args Arguments to the command`
87
88			`# @return A list of the return code (-1 on failure) and any error message.`
89			`# -----------------------------------------------------------------------------`
90	490	jeremybenn	`proc telnet_exec {hostname cmd args} {`
91	453	jeremybenn	`global timeout`
92	555	jeremybenn	`global board_info`
93	553	jeremybenn	`global verbose`
94			`global spawn_id`
95	453	jeremybenn
96	553	jeremybenn	`# Get the connected host name, if it exists. This code matches`
97			`# telnet_open.`
98			`verbose "telnet_exec: original hostname is $hostname"`
99	522	jeremybenn
100	553	jeremybenn	`if {[board_info $hostname exists name]} {`
101			`set connhost [board_info $hostname name]`
102			`} else {`
103			`set connhost $hostname`
104			`}`
105			`verbose "telnet_exec: connhost is $connhost"`
106	453	jeremybenn
107	553	jeremybenn	`if [board_info $connhost exists hostname] {`
108			`set hostname [board_info $connhost hostname]`
109			`}`
110			`verbose "telnet_exec: hostname is $hostname"`
111
112	473	jeremybenn	`# Get the first argument, if any.`
113	453	jeremybenn	`if { [llength $args] > 0 } {`
114			`set pargs [lindex $args 0];`
115			`} else {`
116			`set pargs ""`
117			`}`
118
119	553	jeremybenn	`verbose "telnet_exec: executing on $connhost, command \"$cmd\", pargs \"$pargs\""`
120
121			`# Just check if we have more args. Potentially a second arg is an input`
122			`# file.`
123			`if { [llength $args] > 1 } {`
124			`set tinp [lindex $args 1]`
125			`if {$tinp != {}} {`
126			`verbose "telnet_exec: long args: $args"`
127			`}`
128			`}`
129
130	473	jeremybenn	`# Set the shell prompt`
131	553	jeremybenn	`if [board_info $connhost exists shell_prompt] {`
132			`set shell_prompt [board_info $connhost shell_prompt]`
133			`} elseif ![info exists shell_prompt] {`
134			`# if no prompt, then set it to something generic`
135			`set shell_prompt "\[^\r\n\]*\[$#\] "`
136	453	jeremybenn	`}`
137
138	473	jeremybenn	`# Start a new telnet session if one doesn't already exist. If sucessful`
139	553	jeremybenn	`# the fileid field associated with $connhost will be set to the spawn_id`
140	473	jeremybenn	`# of the new telnet process.`
141	553	jeremybenn	`if ![board_info $connhost exists fileid] {`
142			`if {[telnet_open $connhost] == -1} {`
143			`return [list -1 "telnet to $hostname failed for $cmd, couldn't begin telnet session"]`
144	453	jeremybenn	`}`
145			`}`
146
147	555	jeremybenn	`# Save the timeout. It's a global, which we shall mess about with, and`
148			`# restore on exit.`
149			`set timeout_orig timeout`
150
151	522	jeremybenn	`# Make the telnet session the current process. Short timeout for this.`
152	553	jeremybenn	`set spawn_id [board_info $connhost fileid]`
153			`set timeout 30`
154	453	jeremybenn
155			`#Hit enter to make sure you get a shell prompt`
156	553	jeremybenn	`send "\r"`
157	453	jeremybenn
158			`expect {`
159	473	jeremybenn	`# A prompt indicates the current session is alive`
160	553	jeremybenn	`-re "$shell_prompt" {`
161			`verbose "telnet_exec: got prompt at start"`
162	453	jeremybenn	`}`
163			`default {`
164	553	jeremybenn	`# Timeout or EOF. Die if we have had too many failures`
165			`telnet_failure_check $connhost "no prompt at telnet start"`
166
167			`# Try closing the connection and reopening.`
168			`telnet_close $connhost`
169			`if {[telnet_open $connhost] != -1} {`
170			`set spawn_id [board_info $connhost fileid]`
171			`verbose "telnet_exec: new telnet session, spawn_id: $spawn_id"`
172			`send "\r"`
173	453	jeremybenn	`exp_continue`
174			`} else {`
175	555	jeremybenn	`set timeout timeout_orig`
176	553	jeremybenn	`return [list -1 "telnet to $hostname failed for $cmd, couldn't get a shell prompt"]`
177	453	jeremybenn	`}`
178			`}`
179			`}`
180	473	jeremybenn
181	553	jeremybenn	`# Send the command. We can't cope with any input, so only the first`
182			`# argument (group) is sent.`
183			`send "$cmd $pargs\r"`
184
185			`# We really should get the command echoed back immediately. This is a good`
186			`# way of slurping up unexpected prompts. We first swap out any characters`
187			`# from the command and args that might cause us grief.`
188			`regsub -all "\\+" "$cmd $pargs" "." cmdpargs`
189	555	jeremybenn	`verbose "telnet_exec: command match string is \"$cmdpargs\""`
190	553	jeremybenn
191			`expect {`
192	555	jeremybenn	`-re "$cmdpargs" {`
193	553	jeremybenn	`verbose "telnet_exec: got command echoed back"`
194			`}`
195	555	jeremybenn	`default {`
196			`verbose "telnet_exec: command not echoed: command expect_out(buffer): \"$expect_out(buffer)\""`
197			`}`
198	553	jeremybenn	`}`
199
200	555	jeremybenn	`# Set the telnet command custom timeout to wait for the command to`
201			`# complete executing.`
202	553	jeremybenn	`if [board_info $connhost exists telnet_exec_timeout] {`
203			`set timeout [board_info $connhost telnet_exec_timeout]`
204			`verbose "telnet_exec: command timeout set to $timeout"`
205	522	jeremybenn	`} else {`
206			`# Appropriate default`
207			`set timeout 300`
208	553	jeremybenn	`verbose "telnet_exec: command timeout set to default value $timeout"`
209	522	jeremybenn	`}`
210
211	453	jeremybenn	`expect {`
212	553	jeremybenn	`-re "$shell_prompt" {`
213			`verbose "telnet_exec: got prompt after command"`
214	453	jeremybenn	`}`
215	553	jeremybenn	`default {`
216			`# Give up on timeout or EOF`
217			`telnet_close $connhost`
218	555	jeremybenn	`set timeout timeout_orig`
219	490	jeremybenn	`return [list -1 "telnet to $hostname for $cmd $pargs failed (timeout)"]`
220			`}`
221	453	jeremybenn	`}`
222	473	jeremybenn
223	553	jeremybenn	`# Remove unnecessary strings from the output string`
224			`verbose "telnet_exec: command expect_out(buffer): \"$expect_out(buffer)\""`
225			`regsub -all $cmdpargs "$expect_out(buffer)" {} output`
226			`regsub "$shell_prompt" $output {} output`
227	453	jeremybenn	`regsub -all "\[\r\n\]" $output {} output`
228
229	553	jeremybenn	`if {$output == ""} {`
230			`set output "(no output)"`
231			`} else {`
232			`set output "\"$output\""`
233			`}`
234
235			`verbose "telnet_exec: command output $output"`
236
237	555	jeremybenn	`# Check the return status. Use a short timeout for this and following`
238			`# commands.`
239	453	jeremybenn	`set timeout 30`
240	553	jeremybenn	`send "echo \$?\r"`
241	453	jeremybenn
242	553	jeremybenn	`# Once again, look for the "echo" reflected back as a way of slurping up`
243			`# unexpected prompts. We don't worry about timeout here - we'll sort that`
244	555	jeremybenn	`# out later.`
245	553	jeremybenn	`expect {`
246			`-re "echo \\$\\?" {`
247			`verbose "telnet_exec: got \"echo\" echoed back"`
248			`}`
249	555	jeremybenn	`default {`
250			`verbose "telnet_exec: echo not echoed: command expect_out(buffer): \"$expect_out(buffer)\""`
251			`}`
252	553	jeremybenn	`}`
253
254	555	jeremybenn	`# Look for the shell prompt. Don't worry about timeout for now. It only`
255			`# really matters if we don't get a valid status, which we'll discover`
256			`# below.`
257	553	jeremybenn	`expect {`
258			`-re "$shell_prompt" {`
259			`verbose "telnet_exec: got status shell prompt"`
260			`}`
261			`default {`
262	555	jeremybenn	`verbose "telnet_exec: no status shell prompt: command expect_out(buffer): \"$expect_out(buffer)\""`
263	553	jeremybenn	`}`
264			`}`
265
266			`# Regsub the output to get the status number`
267			`verbose "telnet_exec: status expect_out(buffer): \"$expect_out(buffer)\""`
268	453	jeremybenn	`regsub -all {echo \$\?} $expect_out(buffer) {} status`
269	553	jeremybenn	`regsub "$shell_prompt" $status {} status`
270	453	jeremybenn	`regsub -all "\[\r\n \]" $status {} status`
271	553	jeremybenn	`verbose "telnet_exec: status \"$status\""`
272	453	jeremybenn
273	553	jeremybenn	`# This shouldn't be neccessary...`
274	453	jeremybenn	`if {[regexp {[0123456789]+} $status] != 1} {`
275	553	jeremybenn	`warning "status not a number (\"$status\"), setting to 1"`
276			`verbose "telnet_exec: status (\"$status\"), expect_out(buffer): \"$expect_out(buffer)\""`
277	453	jeremybenn	`set status 1`
278	553	jeremybenn
279			`# Die if we have had too many failures like this.`
280			`telnet_failure_check $connhost "bad status"`
281	453	jeremybenn	`}`
282
283	555	jeremybenn	`set timeout timeout_orig`
284	453	jeremybenn	`if {$status == 0} {`
285			`return [list "0" "$output"]`
286			`} else {`
287			`return [list "1" "$output"]`
288			`}`
289			`}`
290
291	490	jeremybenn
292			`# -----------------------------------------------------------------------------`
293			`# For FTP we need to redefine some existing functions to add additional`
294			`# features.`
295
296			`# -----------------------------------------------------------------------------`
297	522	jeremybenn	`# Upload REMOTEFILE from HOST as LOCALFILE by FTP`
298
299			`# This version swaps the argument order, which is what the regression test`
300			`# seems to expect.`
301
302			`# Also allows a custom timeout to be set.`
303
304			`# @param[in] host The host we are connected to.`
305			`# @param[in] localfile The local file to send`
306			`# @param[in] remotefile Name of file at remote end.`
307			`# -----------------------------------------------------------------------------`
308			`proc ftp_upload {host localfile remotefile} {`
309	555	jeremybenn	`global board_info`
310
311	522	jeremybenn	`set prompt "ftp>"`
312			`verbose "ftping $remotefile from $host to $localfile"`
313
314			`# JPB to set custom timeout (not marked global, so we don't need to save`
315			`# and restore)`
316			`if [board_info $host exists ftp_upload_timeout] {`
317			`set timeout [board_info $host ftp_upload_timeout]`
318			`verbose "FTP upload timeout set to $timeout"`
319			`} else {`
320			`# Appropriate default`
321			`set timeout 15`
322			`verbose "FTP upload timeout set to default value $timeout"`
323			`}`
324
325			`set spawn_id [ftp_open $host]`
326			`if {$spawn_id < 0} {`
327			`return ""`
328			`}`
329			`set loop 1`
330
331			`while {$loop} {`
332			`send -i $spawn_id "get $remotefile $localfile\n"`
333			`expect {`
334			`-i $spawn_id -re ".Too many open files.$prompt" {`
335			`ftp_close $host`
336			`}`
337			`-i $spawn_id -re ".No such file or directory.$prompt" {`
338			`set loop 0`
339			`set remotefile ""`
340			`}`
341			`-i $spawn_id -re "(^\|\[\r\n\])226.*$prompt" {set loop 0}`
342			`-i $spawn_id -re "(^\|\[\r\n\])\[0-9\]\[0-9\]\[0-9\].*$prompt" {`
343			`set loop 0`
344			`set remotefile ""`
345			`}`
346			`-i $spawn_id default {`
347			`ftp_close $host`
348			`}`
349			`}`
350			`if {$loop} {`
351			`set spawn_id [ftp_open $host]`
352			`if {$spawn_id < 0} {`
353			`return ""`
354			`}`
355			`}`
356			`}`
357			`return $localfile`
358			`}`
359
360
361			`# -----------------------------------------------------------------------------`
362	490	jeremybenn	`# Download LOCALFILE to HOST as REMOTEFILE by FTP`
363	522	jeremybenn
364	490	jeremybenn	`# This version takes a user specified timeout, which we need for our slow`
365			`# simulated connection.`
366
367			`# @param[in] host The host we are connected to.`
368			`# @param[in] localfile The local file to send`
369			`# @param[in] remotefile Name of file at remote end.`
370			`# -----------------------------------------------------------------------------`
371			`proc ftp_download {host localfile remotefile} {`
372	555	jeremybenn	`global board_info`
373
374	490	jeremybenn	`set prompt "ftp>"`
375
376			`verbose "putting $localfile $remotefile"`
377
378			`if [board_info $host exists hostname] {`
379			`set remotehost [board_info $host hostname]`
380			`} else {`
381			`set remotehost $host`
382			`}`
383
384			`set spawn_id [ftp_open $host]`
385			`if {$spawn_id < 0} {`
386			`return ""`
387			`}`
388			`set loop 1`
389
390			`# JPB to set custom timeout (not marked global, so we don't need to save`
391			`# and restore)`
392			`if [board_info $host exists ftp_download_timeout] {`
393			`set timeout [board_info $host ftp_download_timeout]`
394			`verbose "FTP download timeout set to $timeout"`
395	522	jeremybenn	`} else {`
396			`# Appropriate default`
397			`set timeout 15`
398			`verbose "FTP download timeout set to default value $timeout"`
399	490	jeremybenn	`}`
400
401			`while {$loop} {`
402			`send -i $spawn_id "put $localfile $remotefile\n"`
403			`expect {`
404			`-i $spawn_id -re ".Too many open files.$prompt" {`
405			`ftp_close $host`
406			`}`
407			`-i $spawn_id -re ".No such file or directory.$prompt" {`
408			`set loop 0`
409			`set remotefile ""`
410			`}`
411			`-re "(^\|\[\r\n\])150.connection for (.) \[(\]\[0-9.,\]+\\)\[\r\n\]" {`
412			`set remotefile $expect_out(2,string)`
413			`exp_continue`
414			`}`
415			`-i $spawn_id -re "(^\|\[\r\n\])226.*$prompt" {`
416			`set loop 0`
417			`}`
418			`-i $spawn_id -re "Timeout.*$prompt" {`
419			`ftp_close $host`
420			`}`
421			`-i $spawn_id -re "(^\|\[\r\n\])\[0-9\]\[0-9\]\[0-9\].*$prompt" {`
422			`set loop 0`
423			`set remotefile ""`
424			`}`
425			`-i $spawn_id default {`
426			`ftp_close $host`
427			`}`
428			`}`
429			`if {$loop} {`
430			`set spawn_id [ftp_open $host]`
431			`if {$spawn_id < 0} {`
432			`return ""`
433			`}`
434			`}`
435			`}`
436			`return $remotefile`
437			`}`
438
439
440	473	jeremybenn	`# This is a list of toolchains that are supported on this board.`
441			`set_board_info target_install {or32-linux}`
442
443			`# No multilib options needed by default.`
444			`process_multilib_options ""`
445
446			`# Load the generic configuration for this board. This will define a basic set`
447			`# of routines needed by the tool to communicate with the board.`
448			`load_generic_config "unix"`
449
450	490	jeremybenn	`# Set up remote target info. We select the IP address using an external`
451			`# program which knows about all available Linuxes.`
452	522	jeremybenn	`set linux_hostname [exec [file dirname $env(DEJAGNU)]/get-ip.sh --rotate]`
453	490	jeremybenn	`set_board_info hostname $linux_hostname`
454	522	jeremybenn	`send_user "OR32 target hostname is $linux_hostname\n"`
455	490	jeremybenn
456	473	jeremybenn	`set_board_info username root`
457
458			`# Use the installed compilers to ensure we get search paths that will find`
459			`# uClibc.`
460			`send_user "set_board_info compiler /opt/or32-new/bin/or32-linux-gcc\n"`
461			`global GCC_UNDER_TEST`
462			`set GCC_UNDER_TEST "/opt/or32-new/bin/or32-linux-gcc"`
463			`global GXX_UNDER_TEST`
464			`set GXX_UNDER_TEST "/opt/or32-new/bin/or32-linux-g++"`
465			`set_board_info compiler /opt/or32-new/bin/or32-linux-gcc`
466			`set_board_info c++compiler /opt/or32-new/bin/or32-linux-g++`
467			`set target_alias "or32-linux"`
468
469			`set_board_info connect telnet`
470	553	jeremybenn	`set_board_info shell_prompt "\[^\r\n\]*# "`
471	522	jeremybenn	`set_board_info telnet_username "root"`
472			`set_board_info telnet_password ""`
473	524	jeremybenn	`set_board_info telnet_exec_timeout 1200`
474	473	jeremybenn
475	490	jeremybenn	`set_board_info file_transfer ftp`
476			`set_board_info ftp_username root`
477			`set_board_info ftp_password ""`
478			`set_board_info ftp_download_timeout 120`
479	522	jeremybenn	`set_board_info ftp_upload_timeout 120`
480	473	jeremybenn
481	453	jeremybenn	`# Options for the simulator`
482			`# set cfg_file [lookfor_file ${srcdir} libgloss/or32/sim.cfg]`
483	490	jeremybenn	`#set_board_info sim,options "-a \"-f ${cfg_file}\""`
484	453	jeremybenn
485			`# We only support uClibc on this target. We assume that all multilib options`
486			`# have been specified before we get here.`
487	490	jeremybenn	`#set_board_info compiler "[find_gcc]"`
488	453	jeremybenn
489	522	jeremybenn	`# We need to define this flag to generate default .gcda files if we are using`
490			`# a stock compiler, without the profopt.exp changes. No problem with doubling`
491			`# up the argument in normal circumstances.`
492			`set_board_info cflags "-fprofile-dir=."`
493			`set_board_info cxxflags "-fprofile-dir=."`
494	473	jeremybenn
495	453	jeremybenn	`# No linker script needed.`
496			`set_board_info ldscript ""`
497
498			`# This simulator isn't slow.`
499			`set_board_info slow_simulator 0`
500

Browse

Tools

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [gnu-src/] [boards/] [or32-linux-sim.exp] - Blame information for rev 560