Subversion Repositories openrisc_me

;; ARM 1136J[F]-S Pipeline Description

;; Copyright (C) 2003, 2007 Free Software Foundation, Inc.

;; Written by CodeSourcery, LLC.

;;

;; This file is part of GCC.

;;

;; GCC is free software; you can redistribute it and/or modify it

;; under the terms of the GNU General Public License as published by

;; the Free Software Foundation; either version 3, or (at your option)

;; any later version.

;;

;; GCC is distributed in the hope that it will be useful, but

;; WITHOUT ANY WARRANTY; without even the implied warranty of

;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

;; General Public License for more details.

;;

;; You should have received a copy of the GNU General Public License

;; along with GCC; see the file COPYING3.  If not see

;; .  */

;; These descriptions are based on the information contained in the

;; ARM1136JF-S Technical Reference Manual, Copyright (c) 2003 ARM

;; Limited.

;;

;; This automaton provides a pipeline description for the ARM

;; 1136J-S and 1136JF-S cores.

;;

;; The model given here assumes that the condition for all conditional

;; instructions is "true", i.e., that all of the instructions are

;; actually executed.

(define_automaton "arm1136jfs")

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; Pipelines

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; There are three distinct pipelines (page 1-26 and following):

;;

;; - A 4-stage decode pipeline, shared by all three.  It has fetch (1),

;;   fetch (2), decode, and issue stages.  Since this is always involved,

;;   we do not model it in the scheduler.

;;

;; - A 4-stage ALU pipeline.  It has shifter, ALU (main integer operations),

;;   and saturation stages.  The fourth stage is writeback; see below.

;;

;; - A 4-stage multiply-accumulate pipeline.  It has three stages, called

;;   MAC1 through MAC3, and a fourth writeback stage.

;;

;;   The 4th-stage writeback is shared between the ALU and MAC pipelines,

;;   which operate in lockstep.  Results from either pipeline will be

;;   moved into the writeback stage.  Because the two pipelines operate

;;   in lockstep, we schedule them as a single "execute" pipeline.

;;

;; - A 4-stage LSU pipeline.  It has address generation, data cache (1),

;;   data cache (2), and writeback stages.  (Note that this pipeline,

;;   including the writeback stage, is independent from the ALU & LSU pipes.)

(define_cpu_unit "e_1,e_2,e_3,e_wb" "arm1136jfs")     ; ALU and MAC

; e_1 = Sh/Mac1, e_2 = ALU/Mac2, e_3 = SAT/Mac3

(define_cpu_unit "l_a,l_dc1,l_dc2,l_wb" "arm1136jfs") ; Load/Store

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; ALU Instructions

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; ALU instructions require eight cycles to execute, and use the ALU

;; pipeline in each of the eight stages.  The results are available

;; after the alu stage has finished.

;;

;; If the destination register is the PC, the pipelines are stalled

;; for several cycles.  That case is not modelled here.

;; ALU operations with no shifted operand

(define_insn_reservation "11_alu_op" 2

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "type" "alu"))

 "e_1,e_2,e_3,e_wb")

;; ALU operations with a shift-by-constant operand

(define_insn_reservation "11_alu_shift_op" 2

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "type" "alu_shift"))

 "e_1,e_2,e_3,e_wb")

;; ALU operations with a shift-by-register operand

;; These really stall in the decoder, in order to read

;; the shift value in a second cycle. Pretend we take two cycles in

;; the shift stage.

(define_insn_reservation "11_alu_shift_reg_op" 3

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "type" "alu_shift_reg"))

 "e_1*2,e_2,e_3,e_wb")

;; alu_ops can start sooner, if there is no shifter dependency

(define_bypass 1 "11_alu_op,11_alu_shift_op"

               "11_alu_op")

(define_bypass 1 "11_alu_op,11_alu_shift_op"

               "11_alu_shift_op"

               "arm_no_early_alu_shift_value_dep")

(define_bypass 1 "11_alu_op,11_alu_shift_op"

               "11_alu_shift_reg_op"

               "arm_no_early_alu_shift_dep")

(define_bypass 2 "11_alu_shift_reg_op"

               "11_alu_op")

(define_bypass 2 "11_alu_shift_reg_op"

               "11_alu_shift_op"

               "arm_no_early_alu_shift_value_dep")

(define_bypass 2 "11_alu_shift_reg_op"

               "11_alu_shift_reg_op"

               "arm_no_early_alu_shift_dep")

(define_bypass 1 "11_alu_op,11_alu_shift_op"

               "11_mult1,11_mult2,11_mult3,11_mult4,11_mult5,11_mult6,11_mult7"

               "arm_no_early_mul_dep")

(define_bypass 2 "11_alu_shift_reg_op"

               "11_mult1,11_mult2,11_mult3,11_mult4,11_mult5,11_mult6,11_mult7"

               "arm_no_early_mul_dep")

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; Multiplication Instructions

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; Multiplication instructions loop in the first two execute stages until

;; the instruction has been passed through the multiplier array enough

;; times.

;; Multiply and multiply-accumulate results are available after four stages.

(define_insn_reservation "11_mult1" 4

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "insn" "mul,mla"))

 "e_1*2,e_2,e_3,e_wb")

;; The *S variants set the condition flags, which requires three more cycles.

(define_insn_reservation "11_mult2" 4

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "insn" "muls,mlas"))

 "e_1*2,e_2,e_3,e_wb")

(define_bypass 3 "11_mult1,11_mult2"

               "11_mult1,11_mult2,11_mult3,11_mult4,11_mult5,11_mult6,11_mult7"

               "arm_no_early_mul_dep")

(define_bypass 3 "11_mult1,11_mult2"

               "11_alu_op")

(define_bypass 3 "11_mult1,11_mult2"

               "11_alu_shift_op"

               "arm_no_early_alu_shift_value_dep")

(define_bypass 3 "11_mult1,11_mult2"

               "11_alu_shift_reg_op"

               "arm_no_early_alu_shift_dep")

(define_bypass 3 "11_mult1,11_mult2"

               "11_store1"

               "arm_no_early_store_addr_dep")

;; Signed and unsigned multiply long results are available across two cycles;

;; the less significant word is available one cycle before the more significant

;; word.  Here we conservatively wait until both are available, which is

;; after three iterations and the memory cycle.  The same is also true of

;; the two multiply-accumulate instructions.

(define_insn_reservation "11_mult3" 5

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "insn" "smull,umull,smlal,umlal"))

 "e_1*3,e_2,e_3,e_wb*2")

;; The *S variants set the condition flags, which requires three more cycles.

(define_insn_reservation "11_mult4" 5

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "insn" "smulls,umulls,smlals,umlals"))

 "e_1*3,e_2,e_3,e_wb*2")

(define_bypass 4 "11_mult3,11_mult4"

               "11_mult1,11_mult2,11_mult3,11_mult4,11_mult5,11_mult6,11_mult7"

               "arm_no_early_mul_dep")

(define_bypass 4 "11_mult3,11_mult4"

               "11_alu_op")

(define_bypass 4 "11_mult3,11_mult4"

               "11_alu_shift_op"

               "arm_no_early_alu_shift_value_dep")

(define_bypass 4 "11_mult3,11_mult4"

               "11_alu_shift_reg_op"

               "arm_no_early_alu_shift_dep")

(define_bypass 4 "11_mult3,11_mult4"

               "11_store1"

               "arm_no_early_store_addr_dep")

;; Various 16x16->32 multiplies and multiply-accumulates, using combinations

;; of high and low halves of the argument registers.  They take a single

;; pass through the pipeline and make the result available after three

;; cycles.

(define_insn_reservation "11_mult5" 3

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "insn" "smulxy,smlaxy,smulwy,smlawy,smuad,smuadx,smlad,smladx,smusd,smusdx,smlsd,smlsdx"))

 "e_1,e_2,e_3,e_wb")

(define_bypass 2 "11_mult5"

               "11_mult1,11_mult2,11_mult3,11_mult4,11_mult5,11_mult6,11_mult7"

               "arm_no_early_mul_dep")

(define_bypass 2 "11_mult5"

               "11_alu_op")

(define_bypass 2 "11_mult5"

               "11_alu_shift_op"

               "arm_no_early_alu_shift_value_dep")

(define_bypass 2 "11_mult5"

               "11_alu_shift_reg_op"

               "arm_no_early_alu_shift_dep")

(define_bypass 2 "11_mult5"

               "11_store1"

               "arm_no_early_store_addr_dep")

;; The same idea, then the 32-bit result is added to a 64-bit quantity.

(define_insn_reservation "11_mult6" 4

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "insn" "smlalxy"))

 "e_1*2,e_2,e_3,e_wb*2")

;; Signed 32x32 multiply, then the most significant 32 bits are extracted

;; and are available after the memory stage.

(define_insn_reservation "11_mult7" 4

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "insn" "smmul,smmulr"))

 "e_1*2,e_2,e_3,e_wb")

(define_bypass 3 "11_mult6,11_mult7"

               "11_mult1,11_mult2,11_mult3,11_mult4,11_mult5,11_mult6,11_mult7"

               "arm_no_early_mul_dep")

(define_bypass 3 "11_mult6,11_mult7"

               "11_alu_op")

(define_bypass 3 "11_mult6,11_mult7"

               "11_alu_shift_op"

               "arm_no_early_alu_shift_value_dep")

(define_bypass 3 "11_mult6,11_mult7"

               "11_alu_shift_reg_op"

               "arm_no_early_alu_shift_dep")

(define_bypass 3 "11_mult6,11_mult7"

               "11_store1"

               "arm_no_early_store_addr_dep")

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; Branch Instructions

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; These vary greatly depending on their arguments and the results of

;; stat prediction.  Cycle count ranges from zero (unconditional branch,

;; folded dynamic prediction) to seven (incorrect predictions, etc).  We

;; assume an optimal case for now, because the cost of a cache miss

;; overwhelms the cost of everything else anyhow.

(define_insn_reservation "11_branches" 0

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "type" "branch"))

 "nothing")

;; Call latencies are not predictable.  A semi-arbitrary very large

;; number is used as "positive infinity" so that everything should be

;; finished by the time of return.

(define_insn_reservation "11_call" 32

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "type" "call"))

 "nothing")

;; Branches are predicted. A correctly predicted branch will be no

;; cost, but we're conservative here, and use the timings a

;; late-register would give us.

(define_bypass 1 "11_alu_op,11_alu_shift_op"

               "11_branches")

(define_bypass 2 "11_alu_shift_reg_op"

               "11_branches")

(define_bypass 2 "11_load1,11_load2"

               "11_branches")

(define_bypass 3 "11_load34"

               "11_branches")

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; Load/Store Instructions

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; The models for load/store instructions do not accurately describe

;; the difference between operations with a base register writeback.

;; These models assume that all memory references hit in dcache.  Also,

;; if the PC is one of the registers involved, there are additional stalls

;; not modelled here.  Addressing modes are also not modelled.

(define_insn_reservation "11_load1" 3

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "type" "load1"))

 "l_a+e_1,l_dc1,l_dc2,l_wb")

;; Load byte results are not available until the writeback stage, where

;; the correct byte is extracted.

(define_insn_reservation "11_loadb" 4

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "type" "load_byte"))

 "l_a+e_1,l_dc1,l_dc2,l_wb")

(define_insn_reservation "11_store1" 0

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "type" "store1"))

 "l_a+e_1,l_dc1,l_dc2,l_wb")

;; Load/store double words into adjacent registers.  The timing and

;; latencies are different depending on whether the address is 64-bit

;; aligned.  This model assumes that it is.

(define_insn_reservation "11_load2" 3

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "type" "load2"))

 "l_a+e_1,l_dc1,l_dc2,l_wb")

(define_insn_reservation "11_store2" 0

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "type" "store2"))

 "l_a+e_1,l_dc1,l_dc2,l_wb")

;; Load/store multiple registers.  Two registers are stored per cycle.

;; Actual timing depends on how many registers are affected, so we

;; optimistically schedule a low latency.

(define_insn_reservation "11_load34" 4

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "type" "load3,load4"))

 "l_a+e_1,l_dc1*2,l_dc2,l_wb")

(define_insn_reservation "11_store34" 0

 (and (eq_attr "tune" "arm1136js,arm1136jfs")

      (eq_attr "type" "store3,store4"))

 "l_a+e_1,l_dc1*2,l_dc2,l_wb")

;; A store can start immediately after an alu op, if that alu op does

;; not provide part of the address to access.

(define_bypass 1 "11_alu_op,11_alu_shift_op"

               "11_store1"

               "arm_no_early_store_addr_dep")

(define_bypass 2 "11_alu_shift_reg_op"

               "11_store1"

               "arm_no_early_store_addr_dep")

;; An alu op can start sooner after a load, if that alu op does not

;; have an early register dependency on the load

(define_bypass 2 "11_load1"

               "11_alu_op")

(define_bypass 2 "11_load1"

               "11_alu_shift_op"

               "arm_no_early_alu_shift_value_dep")

(define_bypass 2 "11_load1"

               "11_alu_shift_reg_op"

               "arm_no_early_alu_shift_dep")

(define_bypass 3 "11_loadb"

               "11_alu_op")

(define_bypass 3 "11_loadb"

               "11_alu_shift_op"

               "arm_no_early_alu_shift_value_dep")

(define_bypass 3 "11_loadb"

               "11_alu_shift_reg_op"

               "arm_no_early_alu_shift_dep")

;; A mul op can start sooner after a load, if that mul op does not

;; have an early multiply dependency

(define_bypass 2 "11_load1"

               "11_mult1,11_mult2,11_mult3,11_mult4,11_mult5,11_mult6,11_mult7"

               "arm_no_early_mul_dep")

(define_bypass 3 "11_load34"

               "11_mult1,11_mult2,11_mult3,11_mult4,11_mult5,11_mult6,11_mult7"

               "arm_no_early_mul_dep")

(define_bypass 3 "11_loadb"

               "11_mult1,11_mult2,11_mult3,11_mult4,11_mult5,11_mult6,11_mult7"

               "arm_no_early_mul_dep")

;; A store can start sooner after a load, if that load does not

;; produce part of the address to access

(define_bypass 2 "11_load1"

               "11_store1"

               "arm_no_early_store_addr_dep")

(define_bypass 3 "11_loadb"

               "11_store1"

               "arm_no_early_store_addr_dep")