Subversion Repositories openrisc_me

/* Definitions of target machine for GNU compiler.  TMS320C[34]x

   Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

   2003, 2004, 2005, 2007 Free Software Foundation, Inc.

   Contributed by Michael Hayes (m.hayes@elec.canterbury.ac.nz)

              and Herman Ten Brugge (Haj.Ten.Brugge@net.HCC.nl).

   This file is part of GCC.

   GCC is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 3, or (at your option)

   any later version.

   GCC is distributed in the hope that it will be useful,

   but WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License

   along with GCC; see the file COPYING3.  If not see

   <http://www.gnu.org/licenses/>.  */

/* RUN-TIME TARGET SPECIFICATION.  */

#define C4x   1

#define TARGET_CPU_CPP_BUILTINS()               \

  do                                            \

    {                                           \

      extern int flag_inline_trees;             \

      if (!TARGET_SMALL)                        \

        builtin_define ("_BIGMODEL");           \

      if (!TARGET_MEMPARM)                      \

        builtin_define ("_REGPARM");            \

      if (flag_inline_functions)                \

        builtin_define ("_INLINE");             \

      if (TARGET_C3X)                           \

        {                                       \

          builtin_define ("_TMS320C3x");        \

          builtin_define ("_C3x");              \

          if (TARGET_C30)                       \

            {                                   \

              builtin_define ("_TMS320C30");    \

              builtin_define ("_C30");          \

            }                                   \

          else if (TARGET_C31)                  \

            {                                   \

              builtin_define ("_TMS320C31");    \

              builtin_define ("_C31");          \

            }                                   \

          else if (TARGET_C32)                  \

            {                                   \

              builtin_define ("_TMS320C32");    \

              builtin_define ("_C32");          \

            }                                   \

          else if (TARGET_C33)                  \

            {                                   \

              builtin_define ("_TMS320C33");    \

              builtin_define ("_C33");          \

            }                                   \

        }                                       \

      else                                      \

        {                                       \

          builtin_define ("_TMS320C4x");        \

          builtin_define ("_C4x");              \

          if (TARGET_C40)                       \

            {                                   \

              builtin_define ("_TMS320C40");    \

              builtin_define ("_C40");          \

            }                                   \

          else if (TARGET_C44)                  \

            {                                   \

              builtin_define ("_TMS320C44");    \

              builtin_define ("_C44");          \

            }                                   \

        }                                       \

    }                                           \

  while (0)

/* Define assembler options.  */

#define ASM_SPEC "\

%{!mcpu=30:%{!mcpu=31:%{!mcpu=32:%{!mcpu=33:%{!mcpu=40:%{!mcpu=44:\

%{!m30:%{!m31:%{!m32:%{!m33:%{!m40:%{!m44:-m40}}}}}}}}}}}} \

%{mcpu=30} \

%{mcpu=31} \

%{mcpu=32} \

%{mcpu=33} \

%{mcpu=40} \

%{mcpu=44} \

%{m30} \

%{m31} \

%{m32} \

%{m33} \

%{m40} \

%{m44} \

%{mmemparm} %{mregparm} %{!mmemparm:%{!mregparm:-mregparm}} \

%{mbig} %{msmall} %{!msmall:%{!mbig:-mbig}}"

/* Define linker options.  */

#define LINK_SPEC "\

%{m30:--architecture c3x} \

%{m31:--architecture c3x} \

%{m32:--architecture c3x} \

%{m33:--architecture c3x} \

%{mcpu=30:--architecture c3x} \

%{mcpu=31:--architecture c3x} \

%{mcpu=32:--architecture c3x} \

%{mcpu=33:--architecture c3x}"

/* Specify the end file to link with.  */

#define ENDFILE_SPEC ""

/* Caveats:

   Max iteration count for RPTB/RPTS is 2^31 + 1.

   Max iteration count for DB is 2^31 + 1 for C40, but 2^23 + 1 for C30.

   RPTS blocks interrupts.  */

extern int c4x_cpu_version;             /* Cpu version C30/31/32/33/40/44.  */

#define TARGET_INLINE           (! optimize_size) /* Inline MPYI.  */

#define TARGET_SMALL_REG_CLASS  0

#define TARGET_C3X              (c4x_cpu_version >= 30 \

                                 && c4x_cpu_version <= 39)

#define TARGET_C30              (c4x_cpu_version == 30)

#define TARGET_C31              (c4x_cpu_version == 31)

#define TARGET_C32              (c4x_cpu_version == 32)

#define TARGET_C33              (c4x_cpu_version == 33)

#define TARGET_C40              (c4x_cpu_version == 40)

#define TARGET_C44              (c4x_cpu_version == 44)

/* Nonzero to use load_immed_addr pattern rather than forcing memory

   addresses into memory.  */

#define TARGET_LOAD_ADDRESS     (1 || (! TARGET_C3X && ! TARGET_SMALL))

/* Nonzero to convert direct memory references into HIGH/LO_SUM pairs

   during RTL generation.  */

#define TARGET_EXPOSE_LDP       0

/* Nonzero to force loading of direct memory references into a register.  */

#define TARGET_LOAD_DIRECT_MEMS 0

/* -mrpts            allows the use of the RPTS instruction irregardless.

   -mrpts=max-cycles will use RPTS if the number of cycles is constant

   and less than max-cycles.  */

#define TARGET_RPTS_CYCLES(CYCLES) (TARGET_RPTS || (CYCLES) < c4x_rpts_cycles)

/* Sometimes certain combinations of command options do not make sense

   on a particular target machine.  You can define a macro

   `OVERRIDE_OPTIONS' to take account of this.  This macro, if

   defined, is executed once just after all the command options have

   been parsed.  */

#define OVERRIDE_OPTIONS c4x_override_options ()

/* Define this to change the optimizations performed by default.  */

#define OPTIMIZATION_OPTIONS(LEVEL,SIZE) c4x_optimization_options(LEVEL, SIZE)

/* Run Time Target Specification.  */

#define TARGET_VERSION fprintf (stderr, " (TMS320C[34]x, TI syntax)");

/* Storage Layout.  */

#define BITS_BIG_ENDIAN         0

#define BYTES_BIG_ENDIAN        0

#define WORDS_BIG_ENDIAN        0

/* Technically, we are little endian, but we put the floats out as

   whole longs and this makes GCC put them out in the right order.  */

#define FLOAT_WORDS_BIG_ENDIAN  1

/* Note the ANSI C standard requires sizeof(char) = 1.  On the C[34]x

   all integral and floating point data types are stored in memory as

   32-bits (floating point types can be stored as 40-bits in the

   extended precision registers), so sizeof(char) = sizeof(short) =

   sizeof(int) = sizeof(long) = sizeof(float) = sizeof(double) = 1.  */

#define BITS_PER_UNIT           32

#define UNITS_PER_WORD          1

#define PARM_BOUNDARY           32

#define STACK_BOUNDARY          32

#define FUNCTION_BOUNDARY       32

#define BIGGEST_ALIGNMENT       32

#define EMPTY_FIELD_BOUNDARY    32

#define STRICT_ALIGNMENT        0

#define TARGET_FLOAT_FORMAT     C4X_FLOAT_FORMAT

#define MAX_FIXED_MODE_SIZE     64 /* HImode.  */

/* If a structure has a floating point field then force structure

   to have BLKMODE, unless it is the only field.  */

#define MEMBER_TYPE_FORCES_BLK(FIELD, MODE) \

  (TREE_CODE (TREE_TYPE (FIELD)) == REAL_TYPE && (MODE) == VOIDmode)

/* Number of bits in the high and low parts of a two stage

   load of an immediate constant.  */

#define BITS_PER_HIGH 16

#define BITS_PER_LO_SUM 16

/* Define register numbers.  */

/* Extended-precision registers.  */

#define R0_REGNO   0

#define R1_REGNO   1

#define R2_REGNO   2

#define R3_REGNO   3

#define R4_REGNO   4

#define R5_REGNO   5

#define R6_REGNO   6

#define R7_REGNO   7

/* Auxiliary (address) registers.  */

#define AR0_REGNO  8

#define AR1_REGNO  9

#define AR2_REGNO 10

#define AR3_REGNO 11

#define AR4_REGNO 12

#define AR5_REGNO 13

#define AR6_REGNO 14

#define AR7_REGNO 15

/* Data page register.  */

#define DP_REGNO  16

/* Index registers.  */

#define IR0_REGNO 17

#define IR1_REGNO 18

/* Block size register.  */

#define BK_REGNO  19

/* Stack pointer.  */

#define SP_REGNO  20

/* Status register.  */

#define ST_REGNO  21

/* Misc. interrupt registers.  */

#define DIE_REGNO 22            /* C4x only.  */

#define IE_REGNO  22            /* C3x only.  */

#define IIE_REGNO 23            /* C4x only.  */

#define IF_REGNO  23            /* C3x only.  */

#define IIF_REGNO 24            /* C4x only.  */

#define IOF_REGNO 24            /* C3x only.  */

/* Repeat block registers.  */

#define RS_REGNO  25

#define RE_REGNO  26

#define RC_REGNO  27

/* Additional extended-precision registers.  */

#define R8_REGNO  28            /* C4x only.  */

#define R9_REGNO  29            /* C4x only.  */

#define R10_REGNO 30            /* C4x only.  */

#define R11_REGNO 31            /* C4x only.  */

#define FIRST_PSEUDO_REGISTER   32

/* Extended precision registers (low set).  */

#define IS_R0R1_REGNO(r) \

     ((unsigned int)((r) - R0_REGNO) <= (R1_REGNO - R0_REGNO))

#define IS_R2R3_REGNO(r) \

     ((unsigned int)((r) - R2_REGNO) <= (R3_REGNO - R2_REGNO))

#define IS_EXT_LOW_REGNO(r) \

     ((unsigned int)((r) - R0_REGNO) <= (R7_REGNO - R0_REGNO))

/* Extended precision registers (high set).  */

#define IS_EXT_HIGH_REGNO(r) \

(! TARGET_C3X \

 && ((unsigned int) ((r) - R8_REGNO) <= (R11_REGNO - R8_REGNO)))

/* Address registers.  */

#define IS_AUX_REGNO(r) \

    ((unsigned int)((r) - AR0_REGNO) <= (AR7_REGNO - AR0_REGNO))

#define IS_ADDR_REGNO(r)   IS_AUX_REGNO(r)

#define IS_DP_REGNO(r)     ((r) == DP_REGNO)

#define IS_INDEX_REGNO(r)  (((r) == IR0_REGNO) || ((r) == IR1_REGNO))

#define IS_SP_REGNO(r)     ((r) == SP_REGNO)

#define IS_BK_REGNO(r)     (TARGET_BK && (r) == BK_REGNO)

/* Misc registers.  */

#define IS_ST_REGNO(r)     ((r) == ST_REGNO)

#define IS_RC_REGNO(r)     ((r) == RC_REGNO)

#define IS_REPEAT_REGNO(r) (((r) >= RS_REGNO) && ((r) <= RC_REGNO))

/* Composite register sets.  */

#define IS_ADDR_OR_INDEX_REGNO(r) (IS_ADDR_REGNO(r) || IS_INDEX_REGNO(r))

#define IS_EXT_REGNO(r)           (IS_EXT_LOW_REGNO(r) || IS_EXT_HIGH_REGNO(r))

#define IS_STD_REGNO(r)           (IS_ADDR_OR_INDEX_REGNO(r) \

                                   || IS_REPEAT_REGNO(r) \

                                   || IS_SP_REGNO(r) \

                                   || IS_BK_REGNO(r))

#define IS_INT_REGNO(r)           (IS_EXT_REGNO(r) || IS_STD_REGNO(r))

#define IS_GROUP1_REGNO(r)        (IS_ADDR_OR_INDEX_REGNO(r) || IS_BK_REGNO(r))

#define IS_INT_CALL_SAVED_REGNO(r) (((r) == R4_REGNO) || ((r) == R5_REGNO) \

                                    || ((r) == R8_REGNO))

#define IS_FLOAT_CALL_SAVED_REGNO(r) (((r) == R6_REGNO) || ((r) == R7_REGNO))

#define IS_PSEUDO_REGNO(r)            ((r) >= FIRST_PSEUDO_REGISTER)

#define IS_R0R1_OR_PSEUDO_REGNO(r)    (IS_R0R1_REGNO(r) || IS_PSEUDO_REGNO(r))

#define IS_R2R3_OR_PSEUDO_REGNO(r)    (IS_R2R3_REGNO(r) || IS_PSEUDO_REGNO(r))

#define IS_EXT_OR_PSEUDO_REGNO(r)     (IS_EXT_REGNO(r) || IS_PSEUDO_REGNO(r))

#define IS_STD_OR_PSEUDO_REGNO(r)     (IS_STD_REGNO(r) || IS_PSEUDO_REGNO(r))

#define IS_INT_OR_PSEUDO_REGNO(r)     (IS_INT_REGNO(r) || IS_PSEUDO_REGNO(r))

#define IS_ADDR_OR_PSEUDO_REGNO(r)    (IS_ADDR_REGNO(r) || IS_PSEUDO_REGNO(r))

#define IS_INDEX_OR_PSEUDO_REGNO(r)   (IS_INDEX_REGNO(r) || IS_PSEUDO_REGNO(r))

#define IS_EXT_LOW_OR_PSEUDO_REGNO(r) (IS_EXT_LOW_REGNO(r) \

                                       || IS_PSEUDO_REGNO(r))

#define IS_DP_OR_PSEUDO_REGNO(r)      (IS_DP_REGNO(r) || IS_PSEUDO_REGNO(r))

#define IS_SP_OR_PSEUDO_REGNO(r)      (IS_SP_REGNO(r) || IS_PSEUDO_REGNO(r))

#define IS_ST_OR_PSEUDO_REGNO(r)      (IS_ST_REGNO(r) || IS_PSEUDO_REGNO(r))

#define IS_RC_OR_PSEUDO_REGNO(r)      (IS_RC_REGNO(r) || IS_PSEUDO_REGNO(r))

#define IS_PSEUDO_REG(op)          (IS_PSEUDO_REGNO(REGNO(op)))

#define IS_ADDR_REG(op)            (IS_ADDR_REGNO(REGNO(op)))

#define IS_INDEX_REG(op)           (IS_INDEX_REGNO(REGNO(op)))

#define IS_GROUP1_REG(r)           (IS_GROUP1_REGNO(REGNO(op)))

#define IS_SP_REG(op)              (IS_SP_REGNO(REGNO(op)))

#define IS_STD_REG(op)             (IS_STD_REGNO(REGNO(op)))

#define IS_EXT_REG(op)             (IS_EXT_REGNO(REGNO(op)))

#define IS_R0R1_OR_PSEUDO_REG(op)  (IS_R0R1_OR_PSEUDO_REGNO(REGNO(op)))

#define IS_R2R3_OR_PSEUDO_REG(op)  (IS_R2R3_OR_PSEUDO_REGNO(REGNO(op)))

#define IS_EXT_OR_PSEUDO_REG(op)   (IS_EXT_OR_PSEUDO_REGNO(REGNO(op)))

#define IS_STD_OR_PSEUDO_REG(op)   (IS_STD_OR_PSEUDO_REGNO(REGNO(op)))

#define IS_EXT_LOW_OR_PSEUDO_REG(op) (IS_EXT_LOW_OR_PSEUDO_REGNO(REGNO(op)))

#define IS_INT_OR_PSEUDO_REG(op)   (IS_INT_OR_PSEUDO_REGNO(REGNO(op)))

#define IS_ADDR_OR_PSEUDO_REG(op)  (IS_ADDR_OR_PSEUDO_REGNO(REGNO(op)))

#define IS_INDEX_OR_PSEUDO_REG(op) (IS_INDEX_OR_PSEUDO_REGNO(REGNO(op)))

#define IS_DP_OR_PSEUDO_REG(op)    (IS_DP_OR_PSEUDO_REGNO(REGNO(op)))

#define IS_SP_OR_PSEUDO_REG(op)    (IS_SP_OR_PSEUDO_REGNO(REGNO(op)))

#define IS_ST_OR_PSEUDO_REG(op)    (IS_ST_OR_PSEUDO_REGNO(REGNO(op)))

#define IS_RC_OR_PSEUDO_REG(op)    (IS_RC_OR_PSEUDO_REGNO(REGNO(op)))

/* 1 for registers that have pervasive standard uses

   and are not available for the register allocator.  */

#define FIXED_REGISTERS \

{                                                                       \

/* R0  R1  R2  R3  R4  R5  R6  R7 AR0 AR1 AR2 AR3 AR4 AR5 AR6 AR7.  */  \

    0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,      \

/* DP IR0 IR1  BK  SP  ST DIE IIE IIF  RS  RE  RC  R8  R9 R10 R11.  */  \

    1,  0,  0,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0       \

}

/* 1 for registers not available across function calls.

   These must include the FIXED_REGISTERS and also any

   registers that can be used without being saved.

   The latter must include the registers where values are returned

   and the register where structure-value addresses are passed.

   Aside from that, you can include as many other registers as you like.

   Note that the extended precision registers are only saved in some

   modes.  The macro HARD_REGNO_CALL_CLOBBERED specifies which modes

   get clobbered for a given regno.  */

#define CALL_USED_REGISTERS \

{                                                                       \

/* R0  R1  R2  R3  R4  R5  R6  R7 AR0 AR1 AR2 AR3 AR4 AR5 AR6 AR7.  */  \

    1,  1,  1,  1,  0,  0,  0,  0,  1,  1,  1,  0,  0,  0,  0,  0,      \

/* DP IR0 IR1  BK  SP  ST DIE IIE IIF  RS  RE  RC  R8  R9 R10 R11.  */  \

    1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  1,  1,  1       \

}

/* Macro to conditionally modify fixed_regs/call_used_regs.  */

#define CONDITIONAL_REGISTER_USAGE                      \

  {                                                     \

    if (! TARGET_BK)                                    \

      {                                                 \

        fixed_regs[BK_REGNO] = 1;                       \

        call_used_regs[BK_REGNO] = 1;                   \

        c4x_regclass_map[BK_REGNO] = NO_REGS;           \

      }                                                 \

    if (TARGET_C3X)                                     \

      {                                                 \

         int i;                                          \

                                                         \

         reg_names[DIE_REGNO] = "ie";  /* Clobber die.  */ \

         reg_names[IF_REGNO] = "if";   /* Clobber iie.  */ \

         reg_names[IOF_REGNO] = "iof"; /* Clobber iif.  */ \

                                                        \

         for (i = R8_REGNO; i <= R11_REGNO; i++)        \

         {                                              \

             fixed_regs[i] = call_used_regs[i] = 1;     \

             c4x_regclass_map[i] = NO_REGS;             \

         }                                              \

      }                                                 \

    if (TARGET_PRESERVE_FLOAT)                          \

      {                                                 \

        c4x_caller_save_map[R6_REGNO] = HFmode;         \

        c4x_caller_save_map[R7_REGNO] = HFmode;         \

      }                                                 \

   }

/* Order of Allocation of Registers.  */

/* List the order in which to allocate registers.  Each register must be

   listed once, even those in FIXED_REGISTERS.

   First allocate registers that don't need preservation across calls,

   except index and address registers.  Then allocate data registers

   that require preservation across calls (even though this invokes an

   extra overhead of having to save/restore these registers).  Next

   allocate the address and index registers, since using these

   registers for arithmetic can cause pipeline stalls.  Finally

   allocated the fixed registers which won't be allocated anyhow.  */

#define REG_ALLOC_ORDER                                 \

{R0_REGNO, R1_REGNO, R2_REGNO, R3_REGNO,                \

 R9_REGNO, R10_REGNO, R11_REGNO,                        \

 RS_REGNO, RE_REGNO, RC_REGNO, BK_REGNO,                \

 R4_REGNO, R5_REGNO, R6_REGNO, R7_REGNO, R8_REGNO,      \

 AR0_REGNO, AR1_REGNO, AR2_REGNO, AR3_REGNO,            \

 AR4_REGNO, AR5_REGNO, AR6_REGNO, AR7_REGNO,            \

 IR0_REGNO, IR1_REGNO,                                  \

 SP_REGNO, DP_REGNO, ST_REGNO, IE_REGNO, IF_REGNO, IOF_REGNO}

/* A C expression that is nonzero if hard register number REGNO2 can be

   considered for use as a rename register for REGNO1 */

#define HARD_REGNO_RENAME_OK(REGNO1,REGNO2) \

  c4x_hard_regno_rename_ok((REGNO1), (REGNO2))

/* Determine which register classes are very likely used by spill registers.

   local-alloc.c won't allocate pseudos that have these classes as their

   preferred class unless they are "preferred or nothing".  */

#define CLASS_LIKELY_SPILLED_P(CLASS) ((CLASS) == INDEX_REGS)

/* CCmode is wrongly defined in machmode.def.  It should have a size

   of UNITS_PER_WORD.  HFmode is 40-bits and thus fits within a single

   extended precision register.  Similarly, HCmode fits within two

   extended precision registers.  */

#define HARD_REGNO_NREGS(REGNO, MODE)                           \

(((MODE) == CCmode || (MODE) == CC_NOOVmode) ? 1 : \

 ((MODE) == HFmode) ? 1 : \

 ((MODE) == HCmode) ? 2 : \

 ((GET_MODE_SIZE(MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD))

/* A C expression that is nonzero if the hard register REGNO is preserved

   across a call in mode MODE.  This does not have to include the call used

   registers.  */

#define HARD_REGNO_CALL_PART_CLOBBERED(REGNO, MODE)                           \

     ((IS_FLOAT_CALL_SAVED_REGNO (REGNO) && ! ((MODE) == QFmode))             \

      || (IS_INT_CALL_SAVED_REGNO (REGNO)                                     \

          && ! ((MODE) == QImode || (MODE) == HImode || (MODE) == Pmode)))

/* Specify the modes required to caller save a given hard regno.  */

#define HARD_REGNO_CALLER_SAVE_MODE(REGNO, NREGS, MODE) (c4x_caller_save_map[REGNO])

#define HARD_REGNO_MODE_OK(REGNO, MODE) c4x_hard_regno_mode_ok(REGNO, MODE)

/* A C expression that is nonzero if it is desirable to choose

   register allocation so as to avoid move instructions between a

   value of mode MODE1 and a value of mode MODE2.

   Value is 1 if it is a good idea to tie two pseudo registers

   when one has mode MODE1 and one has mode MODE2.

   If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,

   for any hard reg, then this must be 0 for correct output.  */

#define MODES_TIEABLE_P(MODE1, MODE2) 0

/* Define the classes of registers for register constraints in the

   machine description.  Also define ranges of constants.

   One of the classes must always be named ALL_REGS and include all hard regs.

   If there is more than one class, another class must be named NO_REGS

   and contain no registers.

   The name GENERAL_REGS must be the name of a class (or an alias for

   another name such as ALL_REGS).  This is the class of registers

   that is allowed by "g" or "r" in a register constraint.

   Also, registers outside this class are allocated only when

   instructions express preferences for them.

   The classes must be numbered in nondecreasing order; that is,

   a larger-numbered class must never be contained completely

   in a smaller-numbered class.

   For any two classes, it is very desirable that there be another

   class that represents their union.  */

enum reg_class

  {

    NO_REGS,

    R0R1_REGS,                  /* 't'.  */

    R2R3_REGS,                  /* 'u'.  */

    EXT_LOW_REGS,               /* 'q'.  */

    EXT_REGS,                   /* 'f'.  */

    ADDR_REGS,                  /* 'a'.  */

    INDEX_REGS,                 /* 'x'.  */

    BK_REG,                     /* 'k'.  */

    SP_REG,                     /* 'b'.  */

    RC_REG,                     /* 'v'.  */

    COUNTER_REGS,               /*  */

    INT_REGS,                   /* 'c'.  */

    GENERAL_REGS,               /* 'r'.  */

    DP_REG,                     /* 'z'.  */

    ST_REG,                     /* 'y'.  */

    ALL_REGS,

    LIM_REG_CLASSES

  };

#define N_REG_CLASSES (int) LIM_REG_CLASSES

#define REG_CLASS_NAMES \

{                       \

   "NO_REGS",           \

   "R0R1_REGS",         \

   "R2R3_REGS",         \

   "EXT_LOW_REGS",      \

   "EXT_REGS",          \

   "ADDR_REGS",         \

   "INDEX_REGS",        \

   "BK_REG",            \

   "SP_REG",            \

   "RC_REG",            \

   "COUNTER_REGS",      \

   "INT_REGS",          \

   "GENERAL_REGS",      \

   "DP_REG",            \

   "ST_REG",            \

   "ALL_REGS"           \

}

/* Define which registers fit in which classes.

   This is an initializer for a vector of HARD_REG_SET

   of length N_REG_CLASSES.  RC is not included in GENERAL_REGS

   since the register allocator will often choose a general register

   in preference to RC for the decrement_and_branch_on_count pattern.  */

#define REG_CLASS_CONTENTS \

{                                               \

 {0x00000000}, /*     No registers.  */         \

 {0x00000003}, /* 't' R0-R1     .  */           \

 {0x0000000c}, /* 'u' R2-R3     .  */           \

 {0x000000ff}, /* 'q' R0-R7     .  */           \

 {0xf00000ff}, /* 'f' R0-R11       */           \

 {0x0000ff00}, /* 'a' AR0-AR7.  */              \

 {0x00060000}, /* 'x' IR0-IR1.  */              \

 {0x00080000}, /* 'k' BK.  */                   \

 {0x00100000}, /* 'b' SP.  */                   \

 {0x08000000}, /* 'v' RC.  */                   \

 {0x0800ff00}, /*     RC,AR0-AR7.  */           \

 {0x0e1eff00}, /* 'c' AR0-AR7, IR0-IR1, BK, SP, RS, RE, RC.  */ \

 {0xfe1effff}, /* 'r' R0-R11, AR0-AR7, IR0-IR1, BK, SP, RS, RE, RC.  */\

 {0x00010000}, /* 'z' DP.  */                   \

 {0x00200000}, /* 'y' ST.  */                   \

 {0xffffffff}, /*     All registers.  */                \

}

/* The same information, inverted:

   Return the class number of the smallest class containing

   reg number REGNO.  This could be a conditional expression

   or could index an array.  */

#define REGNO_REG_CLASS(REGNO) (c4x_regclass_map[REGNO])

/* When SMALL_REGISTER_CLASSES is defined, the lifetime of registers

   explicitly used in the rtl is kept as short as possible.

   We only need to define SMALL_REGISTER_CLASSES if TARGET_PARALLEL_MPY

   is defined since the MPY|ADD insns require the classes R0R1_REGS and

   R2R3_REGS which are used by the function return registers (R0,R1) and

   the register arguments (R2,R3), respectively.  I'm reluctant to define

   this macro since it stomps on many potential optimizations.  Ideally

   it should have a register class argument so that not all the register

   classes gets penalized for the sake of a naughty few...  For long

   double arithmetic we need two additional registers that we can use as

   spill registers.  */

#define SMALL_REGISTER_CLASSES (TARGET_SMALL_REG_CLASS && TARGET_PARALLEL_MPY)

#define BASE_REG_CLASS  ADDR_REGS

#define INDEX_REG_CLASS INDEX_REGS

/*

  Register constraints for the C4x

  a - address reg (ar0-ar7)

  b - stack reg (sp)

  c - other gp int-only reg

  d - data/int reg (equiv. to f)

  f - data/float reg

  h - data/long double reg (equiv. to f)

  k - block count (bk)

  q - r0-r7

  t - r0-r1

  u - r2-r3

  v - repeat count (rc)

  x - index register (ir0-ir1)

  y - status register (st)

  z - dp reg (dp)

  Memory/constant constraints for the C4x

  G - short float 16-bit

  I - signed 16-bit constant (sign extended)

  J - signed 8-bit constant (sign extended)  (C4x only)

  K - signed 5-bit constant (sign extended)  (C4x only for stik)

  L - unsigned 16-bit constant

  M - unsigned 8-bit constant                (C4x only)

  N - ones complement of unsigned 16-bit constant

  Q - indirect arx + 9-bit signed displacement

      (a *-arx(n) or *+arx(n) is used to account for the sign bit)

  R - indirect arx + 5-bit unsigned displacement  (C4x only)

  S - indirect arx + 0, 1, or irn displacement

  T - direct symbol ref

  > - indirect with autoincrement

  < - indirect with autodecrement

  } - indirect with post-modify

  { - indirect with pre-modify

  */

#define REG_CLASS_FROM_LETTER(CC)                               \

     ( ((CC) == 'a') ? ADDR_REGS                                \

     : ((CC) == 'b') ? SP_REG                                   \

     : ((CC) == 'c') ? INT_REGS                                 \

     : ((CC) == 'd') ? EXT_REGS                                 \

     : ((CC) == 'f') ? EXT_REGS                                 \

     : ((CC) == 'h') ? EXT_REGS                                 \

     : ((CC) == 'k') ? BK_REG                                   \

     : ((CC) == 'q') ? EXT_LOW_REGS                             \

     : ((CC) == 't') ? R0R1_REGS                                \

     : ((CC) == 'u') ? R2R3_REGS                                \

     : ((CC) == 'v') ? RC_REG                                   \

     : ((CC) == 'x') ? INDEX_REGS                               \

     : ((CC) == 'y') ? ST_REG                                   \

     : ((CC) == 'z') ? DP_REG                                   \

     : NO_REGS )

/* These assume that REGNO is a hard or pseudo reg number.

   They give nonzero only if REGNO is a hard reg of the suitable class

   or a pseudo reg currently allocated to a suitable hard reg.

   Since they use reg_renumber, they are safe only once reg_renumber

   has been allocated, which happens in local-alloc.c.  */

#define REGNO_OK_FOR_BASE_P(REGNO)  \

     (IS_ADDR_REGNO(REGNO) || IS_ADDR_REGNO((unsigned)reg_renumber[REGNO]))

#define REGNO_OK_FOR_INDEX_P(REGNO) \

     (IS_INDEX_REGNO(REGNO) || IS_INDEX_REGNO((unsigned)reg_renumber[REGNO]))

/* If we have to generate framepointer + constant prefer an ADDR_REGS

   register.  This avoids using EXT_REGS in addqi3_noclobber_reload.  */

#define PREFERRED_RELOAD_CLASS(X, CLASS)                        \

     (GET_CODE (X) == PLUS                                      \

      && GET_MODE (X) == Pmode                                  \

      && GET_CODE (XEXP ((X), 0)) == REG                        \

      && GET_MODE (XEXP ((X), 0)) == Pmode                      \

      && REGNO (XEXP ((X), 0)) == FRAME_POINTER_REGNUM          \

      && GET_CODE (XEXP ((X), 1)) == CONST_INT                  \

        ? ADDR_REGS : (CLASS))

#define LIMIT_RELOAD_CLASS(X, CLASS) (CLASS)

#define SECONDARY_MEMORY_NEEDED(CLASS1, CLASS2, MODE) 0

#define CLASS_MAX_NREGS(CLASS, MODE)                    \

(((MODE) == CCmode || (MODE) == CC_NOOVmode) ? 1 : ((MODE) == HFmode) ? 1 : \

((GET_MODE_SIZE(MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD))

#define IS_INT5_CONST(VAL) (((VAL) <= 15) && ((VAL) >= -16))    /* 'K'.  */

#define IS_UINT5_CONST(VAL) (((VAL) <= 31) && ((VAL) >= 0))     /* 'R'.  */

#define IS_INT8_CONST(VAL) (((VAL) <= 127) && ((VAL) >= -128))  /* 'J'.  */

#define IS_UINT8_CONST(VAL) (((VAL) <= 255) && ((VAL) >= 0))    /* 'M'.  */

#define IS_INT16_CONST(VAL) (((VAL) <= 32767) && ((VAL) >= -32768)) /* 'I'.  */

#define IS_UINT16_CONST(VAL) (((VAL) <= 65535) && ((VAL) >= 0)) /* 'L'.  */

#define IS_NOT_UINT16_CONST(VAL) IS_UINT16_CONST(~(VAL))        /* 'N'.  */

#define IS_HIGH_CONST(VAL) \

(! TARGET_C3X && (((VAL) & 0xffff) == 0)) /* 'O'.  */

#define IS_DISP1_CONST(VAL) (((VAL) <= 1) && ((VAL) >= -1)) /* 'S'.  */

#define IS_DISP8_CONST(VAL) (((VAL) <= 255) && ((VAL) >= -255)) /* 'Q'.  */

#define IS_DISP1_OFF_CONST(VAL) (IS_DISP1_CONST (VAL) \

                                 && IS_DISP1_CONST (VAL + 1))

#define IS_DISP8_OFF_CONST(VAL) (IS_DISP8_CONST (VAL) \

                                 && IS_DISP8_CONST (VAL + 1))

#define CONST_OK_FOR_LETTER_P(VAL, C)                                   \

        ( ((C) == 'I') ? (IS_INT16_CONST (VAL))                         \

        : ((C) == 'J') ? (! TARGET_C3X && IS_INT8_CONST (VAL))          \

        : ((C) == 'K') ? (! TARGET_C3X && IS_INT5_CONST (VAL))          \

        : ((C) == 'L') ? (IS_UINT16_CONST (VAL))                        \

        : ((C) == 'M') ? (! TARGET_C3X && IS_UINT8_CONST (VAL))         \

        : ((C) == 'N') ? (IS_NOT_UINT16_CONST (VAL))                    \

        : ((C) == 'O') ? (IS_HIGH_CONST (VAL))                          \

        : 0 )

#define CONST_DOUBLE_OK_FOR_LETTER_P(OP, C)                             \

        ( ((C) == 'G') ? (fp_zero_operand (OP, QFmode))                 \

        : ((C) == 'H') ? (c4x_H_constant (OP))                          \

        : 0 )

#define EXTRA_CONSTRAINT(OP, C) \

        ( ((C) == 'Q') ? (c4x_Q_constraint (OP))                        \

        : ((C) == 'R') ? (c4x_R_constraint (OP))                        \

        : ((C) == 'S') ? (c4x_S_constraint (OP))                        \

        : ((C) == 'T') ? (c4x_T_constraint (OP))                        \

        : ((C) == 'U') ? (c4x_U_constraint (OP))                        \

        : 0 )

#define SMALL_CONST(VAL, insn)                                          \

     (  ((insn == NULL_RTX) || (get_attr_data (insn) == DATA_INT16))    \

        ? IS_INT16_CONST (VAL)                                          \

        : ( (get_attr_data (insn) == DATA_NOT_UINT16)                   \

            ? IS_NOT_UINT16_CONST (VAL)                                 \

            :  ( (get_attr_data (insn) == DATA_HIGH_16)                 \

               ? IS_HIGH_CONST (VAL)                                    \

               : IS_UINT16_CONST (VAL)                                  \

            )                                                           \

          )                                                             \

        )

/*

   I. Routine calling with arguments in registers

   ----------------------------------------------

   The TI C3x compiler has a rather unusual register passing algorithm.

   Data is passed in the following registers (in order):

   AR2, R2, R3, RC, RS, RE

   However, the first and second floating point values are always in R2

   and R3 (and all other floats are on the stack).  Structs are always

   passed on the stack.  If the last argument is an ellipsis, the

   previous argument is passed on the stack so that its address can be

   taken for the stdargs macros.

   Because of this, we have to pre-scan the list of arguments to figure

   out what goes where in the list.

   II. Routine calling with arguments on stack

   -------------------------------------------

   Let the subroutine declared as "foo(arg0, arg1, arg2);" have local

   variables loc0, loc1, and loc2.  After the function prologue has

   been executed, the stack frame will look like:

   [stack grows towards increasing addresses]

       I-------------I

   5   I saved reg1  I  <= SP points here

       I-------------I

   4   I saved reg0  I

       I-------------I

   3   I       loc2  I

       I-------------I

   2   I       loc1  I

       I-------------I

   1   I       loc0  I

       I-------------I

       I-------------I

   -1  I  return PC  I

       I-------------I

   -2  I       arg0  I

       I-------------I

   -3  I       arg1  I

       I-------------I

   -4  I       arg2  I

       I-------------I

   All local variables (locn) are accessible by means of +FP(n+1)

   addressing, where n is the local variable number.

   All stack arguments (argn) are accessible by means of -FP(n-2).

   The stack pointer (SP) points to the last register saved in the

   prologue (regn).

   Note that a push instruction performs a preincrement of the stack

   pointer.  (STACK_PUSH_CODE == PRE_INC)

   III. Registers used in function calling convention

   --------------------------------------------------

   Preserved across calls: R4...R5 (only by PUSH,  i.e. lower 32 bits)

   R6...R7 (only by PUSHF, i.e. upper 32 bits)

   AR3...AR7

   (Because of this model, we only assign FP values in R6, R7 and

   only assign integer values in R4, R5.)

   These registers are saved at each function entry and restored at

   the exit. Also it is expected any of these not affected by any

   call to user-defined (not service) functions.

   Not preserved across calls: R0...R3

   R4...R5 (upper 8 bits)

   R6...R7 (lower 8 bits)

   AR0...AR2, IR0, IR1, BK, ST, RS, RE, RC

   These registers are used arbitrary in a function without being preserved.

   It is also expected that any of these can be clobbered by any call.

   Not used by GCC (except for in user "asm" statements):

   IE (DIE), IF (IIE), IOF (IIF)

   These registers are never used by GCC for any data, but can be used

   with "asm" statements.  */

#define C4X_ARG0 -2

#define C4X_LOC0 1

/* Basic Stack Layout.  */

/* The stack grows upward, stack frame grows upward, and args grow

   downward.  */

#define STARTING_FRAME_OFFSET           C4X_LOC0

#define FIRST_PARM_OFFSET(FNDECL)      (C4X_ARG0 + 1)

#define ARGS_GROW_DOWNWARD

#define STACK_POINTER_OFFSET 1

/* Define this if pushing a word on the stack

   makes the stack pointer a smaller address.  */

/* #define STACK_GROWS_DOWNWARD.  */

/* Like the dsp16xx, i370, i960, and we32k ports.  */