Subversion Repositories openrisc_me

#! /bin/sh

# ltconfig - Create a system-specific libtool.

# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001

# Free Software Foundation, Inc.

# Originally by Gordon Matzigkeit , 1996

#

# This file is free software; you can redistribute it and/or modify it

# under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 2 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful, but

# WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

# General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program; if not, write to the Free Software

# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

#

# As a special exception to the GNU General Public License, if you

# distribute this file as part of a program that contains a

# configuration script generated by Autoconf, you may include it under

# the same distribution terms that you use for the rest of that program.

# A lot of this script is taken from autoconf-2.10.

# Check that we are running under the correct shell.

SHELL=${CONFIG_SHELL-/bin/sh}

echo=echo

if test "X$1" = X--no-reexec; then

  # Discard the --no-reexec flag, and continue.

  shift

elif test "X$1" = X--fallback-echo; then

  # Avoid inline document here, it may be left over

  :

elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then

  # Yippee, $echo works!

  :

else

  # Restart under the correct shell.

  exec "$SHELL" "$0" --no-reexec ${1+"$@"}

fi

if test "X$1" = X--fallback-echo; then

  # used as fallback echo

  shift

  cat <

$*

EOF

  exit 0

fi

# Find the correct PATH separator.  Usually this is `:', but

# DJGPP uses `;' like DOS.

if test "X${PATH_SEPARATOR+set}" != Xset; then

  UNAME=${UNAME-`uname 2>/dev/null`}

  case X$UNAME in

    *-DOS) PATH_SEPARATOR=';' ;;

    *)     PATH_SEPARATOR=':' ;;

  esac

fi

# The HP-UX ksh and POSIX shell print the target directory to stdout

# if CDPATH is set.

if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi

if test "X${echo_test_string+set}" != Xset; then

  # find a string as large as possible, as long as the shell can cope with it

  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do

    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...

    if (echo_test_string="`eval $cmd`") 2>/dev/null &&

       echo_test_string="`eval $cmd`" &&

       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then

      break

    fi

  done

fi

if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&

   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&

   test "X$echo_testing_string" = "X$echo_test_string"; then

  :

else

  # The Solaris, AIX, and Digital Unix default echo programs unquote

  # backslashes.  This makes it impossible to quote backslashes using

  #   echo "$something" | sed 's/\\/\\\\/g'

  #

  # So, first we look for a working echo in the user's PATH.

  IFS="${IFS=   }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"

  for dir in $PATH /usr/ucb; do

    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&

       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&

       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&

       test "X$echo_testing_string" = "X$echo_test_string"; then

      echo="$dir/echo"

      break

    fi

  done

  IFS="$save_ifs"

  if test "X$echo" = Xecho; then

    # We didn't find a better echo, so look for alternatives.

    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&

       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&

       test "X$echo_testing_string" = "X$echo_test_string"; then

      # This shell has a builtin print -r that does the trick.

      echo='print -r'

    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&

         test "X$CONFIG_SHELL" != X/bin/ksh; then

      # If we have ksh, try running ltconfig again with it.

      ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"

      export ORIGINAL_CONFIG_SHELL

      CONFIG_SHELL=/bin/ksh

      export CONFIG_SHELL

      exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}

    else

      # Try using printf.

      echo='printf %s\n'

      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&

         echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&

         test "X$echo_testing_string" = "X$echo_test_string"; then

        # Cool, printf works

        :

      elif echo_testing_string=`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null` &&

           test "X$echo_testing_string" = 'X\t' &&

           echo_testing_string=`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&

           test "X$echo_testing_string" = "X$echo_test_string"; then

        CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL"

        export CONFIG_SHELL

        SHELL="$CONFIG_SHELL"

        export SHELL

        echo="$CONFIG_SHELL $0 --fallback-echo"

      elif echo_testing_string=`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null` &&

           test "X$echo_testing_string" = 'X\t' &&

           echo_testing_string=`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&

           test "X$echo_testing_string" = "X$echo_test_string"; then

        echo="$CONFIG_SHELL $0 --fallback-echo"

      else

        # maybe with a smaller string...

        prev=:

        for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do

          if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then

            break

          fi

          prev="$cmd"

        done

        if test "$prev" != 'sed 50q "$0"'; then

          echo_test_string=`eval $prev`

          export echo_test_string

          exec "${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}}" "$0" ${1+"$@"}

        else

          # Oops.  We lost completely, so just stick with echo.

          echo=echo

        fi

      fi

    fi

  fi

fi

# Sed substitution that helps us do robust quoting.  It backslashifies

# metacharacters that are still active within double-quoted strings.

Xsed='sed -e s/^X//'

sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'

# Same as above, but do not quote variable references.

double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'

# Sed substitution to delay expansion of an escaped shell variable in a

# double_quote_subst'ed string.

delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'

# The name of this program.

progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`

# Constants:

PROGRAM=ltconfig

PACKAGE=libtool

VERSION=1.4a-GCC3.0

TIMESTAMP=" (1.641.2.256 2001/05/28 20:09:07 with GCC-local changes)"

ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'

ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'

rm="rm -f"

help="Try \`$progname --help' for more information."

# Global variables:

default_ofile=libtool

can_build_shared=yes

enable_shared=yes

# All known linkers require a `.a' archive for static linking (except M$VC,

# which needs '.lib').

enable_static=yes

enable_fast_install=yes

enable_dlopen=unknown

enable_win32_dll=no

pic_mode=default

ltmain=

silent=

srcdir=

ac_config_guess=

ac_config_sub=

host=

build=NONE

nonopt=NONE

ofile="$default_ofile"

verify_host=yes

tagname=

with_gcc=no

with_gnu_ld=no

need_locks=yes

ac_ext=c

libext=a

cache_file=

max_cmd_len=

## Dependencies to place before and after the object being linked:

predep_objects=

postdep_objects=

predeps=

postdeps=

compiler_lib_search_path=

## Link characteristics:

allow_undefined_flag=

no_undefined_flag=

need_lib_prefix=unknown

need_version=unknown

# when you set need_version to no, make sure it does not cause -set_version

# flags to be left without arguments

archive_cmds=

archive_expsym_cmds=

old_archive_from_new_cmds=

old_archive_from_expsyms_cmds=

striplib=

old_striplib=

export_dynamic_flag_spec=

whole_archive_flag_spec=

thread_safe_flag_spec=

hardcode_into_libs=no

hardcode_libdir_flag_spec=

hardcode_libdir_separator=

hardcode_direct=no

hardcode_minus_L=no

hardcode_shlibpath_var=unsupported

runpath_var=

link_all_deplibs=unknown

always_export_symbols=no

export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'

# include_expsyms should be a list of space-separated symbols to be *always*

# included in the symbol list

include_expsyms=

# exclude_expsyms can be an egrep regular expression of symbols to exclude

# it will be wrapped by ` (' and `)$', so one must not match beginning or

# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',

# as well as any symbol that contains `d'.

exclude_expsyms="_GLOBAL_OFFSET_TABLE_"

# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out

# platforms (ab)use it in PIC code, but their linkers get confused if

# the symbol is explicitly referenced.  Since portable code cannot

# rely on this symbol name, it's probably fine to never include it in

# preloaded symbol tables.

extract_expsyms_cmds=

file_list_spec=

## Tools:

old_AR="$AR"

old_AR_FLAGS="$AR_FLAGS"

old_CC="$CC"

old_CFLAGS="$CFLAGS"

old_CPPFLAGS="$CPPFLAGS"

old_LDFLAGS="$LDFLAGS"

old_LIBS="$LIBS"

old_MAGIC_CMD="$MAGIC_CMD"

old_LD="$LD"

old_LN_S="$LN_S"

old_LTCC="$LTCC"

old_NM="$NM"

old_RANLIB="$RANLIB"

old_STRIP="$STRIP"

old_AS="$AS"

old_DLLTOOL="$DLLTOOL"

old_OBJDUMP="$OBJDUMP"

old_OBJEXT="$OBJEXT"

old_EXEEXT="$EXEEXT"

old_reload_flag="$reload_flag"

old_deplibs_check_method="$deplibs_check_method"

old_file_magic_cmd="$file_magic_cmd"

# Parse the command line options.

args=

prev=

for option

do

  case $option in

  -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;

  *) optarg= ;;

  esac

  # If the previous option needs an argument, assign it.

  if test -n "$prev"; then

    eval "$prev=\$option"

    prev=

    continue

  fi

  case $option in

  --help) cat <

Usage: $progname [OPTION]... LTMAIN [HOST]

Generate a system-specific libtool script.

    --build                configure for building on BUILD [BUILD=HOST]

    --debug                enable verbose shell tracing

    --disable-shared       do not build shared libraries

    --disable-static       do not build static libraries

    --disable-fast-install do not optimize for fast installation

    --enable-dlopen        enable dlopen support

    --enable-win32-dll     enable building dlls on win32 hosts

    --help                 display this help and exit

    --no-verify            do not verify that HOST is a valid host type

-o, --output=FILE          specify the output file [default=$default_ofile]

    --quiet                same as \`--silent'

    --silent               do not print informational messages

    --srcdir=DIR           find \`config.guess' in DIR

    --version              output version information and exit

    --add-tag=TAG          append an alternate configuration

    --with-gcc             assume that the GNU C compiler will be used

    --with-gnu-ld          assume that the C compiler uses the GNU linker

    --prefer-pic           try to use only PIC objects

    --prefer-non-pic       try to use only non-PIC objects

    --disable-lock         disable file locking

    --cache-file=FILE      configure cache file

LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program

that provides basic libtool functionality.

HOST is the canonical host system name [default=guessed].

EOM

  exit 0

  ;;

  --build) prev=build ;;

  --build=*) build="$optarg" ;;

  --debug)

    echo "$progname: enabling shell trace mode"

    set -x

    ;;

  --disable-shared) enable_shared=no ;;

  --disable-static) enable_static=no ;;

  --disable-fast-install) enable_fast_install=no ;;

  --enable-dlopen) enable_dlopen=yes ;;

  --enable-win32-dll) enable_win32_dll=yes ;;

  --quiet | --silent) silent=yes ;;

  --srcdir) prev=srcdir ;;

  --srcdir=*) srcdir="$optarg" ;;

  --no-verify) verify_host=no ;;

  --output | -o) prev=ofile ;;

  --output=*) ofile="$optarg" ;;

  --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;;

  --add-tag) prev=tagname ;;

  --add-tag=*) tagname="$optarg" ;;

  --with-gcc) with_gcc=yes ;;

  --with-gnu-ld) with_gnu_ld=yes ;;

  --prefer-pic) pic_mode=yes ;;

  --prefer-non-pic) pic_mode=no ;;

  --disable-lock) need_locks=no ;;

  --cache-file=*) cache_file="$optarg" ;;

  -*)

    echo "$progname: unrecognized option \`$option'" 1>&2

    echo "$help" 1>&2

    exit 1

    ;;

  *)

    if test -z "$ltmain"; then

      ltmain="$option"

    elif test -z "$host"; then

# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1

#      if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then

#        echo "$progname: warning \`$option' is not a valid host type" 1>&2

#      fi

      host="$option"

    else

      echo "$progname: too many arguments" 1>&2

      echo "$help" 1>&2

      exit 1

    fi ;;

  esac

done

if test -z "$ltmain"; then

  echo "$progname: you must specify a LTMAIN file" 1>&2

  echo "$help" 1>&2

  exit 1

fi

if test ! -f "$ltmain"; then

  echo "$progname: \`$ltmain' does not exist" 1>&2

  echo "$help" 1>&2

  exit 1

fi

if test -n "$tagname"; then

  # Check whether tagname contains only valid characters

  case `$echo "X$tagname" | $Xsed -e 's/[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]//g'` in

  "") ;;

  *)

    echo "$progname: invalid tag name: $tagname" 1>&2

    exit 1

    ;;

  esac

  if grep "^### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$ofile" > /dev/null; then

    echo "$progname: tag name $tagname already exists" 1>&2

    exit 1

  fi

  if test ! -f "$ofile"; then

    echo "$progname: warning: output file \`$ofile' does not exist" 1>&2

  fi

  if test -z "$LTCC"; then

    eval "`$SHELL $ofile --config | grep '^LTCC='`"

    if test -z "$LTCC"; then

      echo "$progname: warning: output file \`$ofile' does not look like a libtool script" 1>&2

    else

      echo "$progname: warning: using \`LTCC=$LTCC', extracted from \`$ofile'" 1>&2

    fi

  fi

fi

# Quote any args containing shell metacharacters.

ltconfig_args=

for arg

do

  case $arg in

  *" "*|*"      "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)

  ltconfig_args="$ltconfig_args '$arg'" ;;

  *) ltconfig_args="$ltconfig_args $arg" ;;

  esac

done

# A relevant subset of AC_INIT.

# File descriptor usage:

# 0 standard input

# 1 file creation

# 2 errors and warnings

# 3 some systems may open it to /dev/tty

# 4 used on the Kubota Titan

# 5 compiler messages saved in config.log

# 6 checking for... messages and results

if test "$silent" = yes; then

  exec 6>/dev/null

else

  exec 6>&1

fi

exec 5>>./config.log

# NLS nuisances.

# Only set LANG and LC_ALL to C if already set.

# These must not be set unconditionally because not all systems understand

# e.g. LANG=C (notably SCO).

if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi

if test "X${LANG+set}"   = Xset; then LANG=C;   export LANG;   fi

if test -n "$cache_file" && test -r "$cache_file" && test -f "$cache_file"; then

  echo "loading cache $cache_file within ltconfig"

  . $cache_file

fi

if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then

  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.

  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then

    ac_n= ac_c='

' ac_t='        '

  else

    ac_n=-n ac_c= ac_t=

  fi

else

  ac_n= ac_c='\c' ac_t=

fi

if test -z "$srcdir"; then

  # Assume the source directory is the same one as the path to LTMAIN.

  srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'`

  test "$srcdir" = "$ltmain" && srcdir=.

fi

trap "$rm conftest*; exit 1" 1 2 15

if test "$verify_host" = yes; then

  # Check for config.guess and config.sub.

  ac_aux_dir=

  for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do

    if test -f $ac_dir/config.guess; then

      ac_aux_dir=$ac_dir

      break

    fi

  done

  if test -z "$ac_aux_dir"; then

    echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2

    echo "$help" 1>&2

    exit 1

  fi

  ac_config_guess=$ac_aux_dir/config.guess

  ac_config_sub=$ac_aux_dir/config.sub

  # Make sure we can run config.sub.

  if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :

  else

    echo "$progname: cannot run $ac_config_sub" 1>&2

    echo "$help" 1>&2

    exit 1

  fi

  echo $ac_n "checking host system type""... $ac_c" 1>&6

  host_alias=$host

  case $host_alias in

  "")

    # Force config.guess to use the C compiler.

    # CC_FOR_BUILD overrides the CC variable in config.guess but I had

    # problems with it so do it this way for now.

    CC="$LTCC"

    if host_alias=`$SHELL $ac_config_guess`; then :

    else

      echo "$progname: cannot guess host type; you must specify one" 1>&2

      echo "$help" 1>&2

      exit 1

    fi

    # Restore the C compiler.

    CC="$old_CC"

    ;;

  esac

  host=`$SHELL $ac_config_sub $host_alias`

  echo "$ac_t$host" 1>&6

  # Make sure the host verified.

  test -z "$host" && exit 1

  # Check for the build system type

  echo $ac_n "checking build system type... $ac_c" 1>&6

  build_alias=$build

  case $build_alias in

  NONE)

    case $nonopt in

    NONE) build_alias=$host_alias ;;

    *) build_alias=$nonopt ;;

    esac ;;

  esac

  build=`$SHELL $ac_config_sub $build_alias`

  build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`

  build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`

  build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`

  echo "$ac_t""$build" 1>&6

elif test -z "$host"; then

  echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2

  echo "$help" 1>&2

  exit 1

else

  host_alias=$host

  build_alias=$host_alias

  build=$host

fi

if test x"$host" != x"$build"; then

  ac_tool_prefix=${host_alias}-

else

  ac_tool_prefix=

fi

host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`

host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`

host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`

# Transform linux* to *-*-linux-gnu*, to support old configure scripts.

case $host_os in

linux-gnu*) ;;

linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`

esac

case $host_os in

aix3*)

  # AIX sometimes has problems with the GCC collect2 program.  For some

  # reason, if we set the COLLECT_NAMES environment variable, the problems

  # vanish in a puff of smoke.

  if test "X${COLLECT_NAMES+set}" != Xset; then

    COLLECT_NAMES=

    export COLLECT_NAMES

  fi

  ;;

esac

# Determine commands to create old-style static archives.

old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'

old_postinstall_cmds='chmod 644 $oldlib'

old_postuninstall_cmds=

if test -n "$RANLIB"; then

  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"

  old_postinstall_cmds="~$old_postinstall_cmds~\$RANLIB \$oldlib"

fi

# Source the script associated with the $tagname tag configuration.

if test -n "$tagname"; then

  . $ltmain

else

  # FIXME:  We should use a variable here

  # Configure for a C compiler

  . $srcdir/ltcf-c.sh

fi

# Set sane defaults for various variables

test -z "$AR" && AR=ar

test -z "$AR_FLAGS" && AR_FLAGS=cru

test -z "$AS" && AS=as

test -z "$CC" && CC=cc

test -z "$DLLTOOL" && DLLTOOL=dlltool

test -z "$MAGIC_CMD" && MAGIC_CMD=file

test -z "$LD" && LD=ld

test -z "$LN_S" && LN_S="ln -s"

test -z "$NM" && NM=nm

test -z "$OBJDUMP" && OBJDUMP=objdump

test -z "$RANLIB" && RANLIB=:

test -z "$STRIP" && STRIP=:

test -z "$objext" && objext=o

echo $ac_n "checking for objdir... $ac_c" 1>&6

rm -f .libs 2>/dev/null

mkdir .libs 2>/dev/null

if test -d .libs; then

  objdir=.libs

else

  # MS-DOS does not allow filenames that begin with a dot.

  objdir=_libs

fi

rmdir .libs 2>/dev/null

echo "$ac_t$objdir" 1>&6

# If no C compiler was specified, use CC.

LTCC=${LTCC-"$CC"}

# Allow CC to be a program name with arguments.

set dummy $CC

compiler="$2"

# We assume here that the value for ac_cv_prog_cc_pic will not be cached

# in isolation, and that seeing it set (from the cache) indicates that

# the associated values are set (in the cache) correctly too.

echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6

echo "$progname:678:checking for $compiler option to produce PIC" 1>&5

if test -z "$ac_cv_prog_cc_pic"; then

  echo "$ac_t"none 1>&6

else

  echo "$ac_t""$ac_cv_prog_cc_pic" 1>&6

  # Check to make sure the pic_flag actually works.

  echo $ac_n "checking if $compiler PIC flag $ac_cv_prog_cc_pic works... $ac_c" 1>&6

  echo "$progname:687:checking that $compiler PIC flag $ac_cv_prog_cc_pic works." 1>&5

  if test "X${ac_cv_prog_cc_pic_works+set}" = Xset && \

     test "X${ac_cv_prog_cc_pic_works}" != X; then

    echo $ac_n "(cached) $ac_c" 1>&6

  else

    ac_cv_prog_cc_pic_works=yes

    $rm conftest*

    echo $lt_simple_compile_test_code > conftest.$ac_ext

    save_CFLAGS="$CFLAGS"

    CFLAGS="$CFLAGS $ac_cv_prog_cc_pic -DPIC"

    if { (eval echo $progname:697: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then

      # Append any warnings to the config.log.

      cat conftest.err 1>&5

      case $host_os in

      hpux9* | hpux10* | hpux11*)

        # On HP-UX, both CC and GCC only warn that PIC is supported... then

        # they create non-PIC objects.  So, if there were any warnings, we

        # assume that PIC is not supported.

        if test -s conftest.err; then

          ac_cv_prog_cc_pic_works=no

          ac_cv_prog_cc_can_build_shared=no

          ac_cv_prog_cc_pic=

        else

          ac_cv_prog_cc_pic_works=yes

          ac_cv_prog_cc_pic=" $ac_cv_prog_cc_pic"

        fi

        ;;

      *)

        ac_cv_prog_cc_pic_works=yes

        ac_cv_prog_cc_pic=" $ac_cv_prog_cc_pic"

        ;;

      esac

    else

      # Append any errors to the config.log.

      cat conftest.err 1>&5

      ac_cv_prog_cc_pic_works=no

      ac_cv_prog_cc_can_build_shared=no

      ac_cv_prog_cc_pic=

    fi

    CFLAGS="$save_CFLAGS"

    $rm conftest*

  fi

  # Belt *and* braces to stop my trousers falling down:

  if test "X$ac_cv_prog_cc_pic_works" = Xno; then

    ac_cv_prog_cc_pic=

    ac_cv_prog_cc_can_build_shared=no

  fi

  echo "$ac_t""$ac_cv_prog_cc_pic_works" 1>&6

fi

# Check for any special shared library compilation flags.

if test -n "$ac_cv_prog_cc_shlib"; then

  echo "$progname: warning: \`$CC' requires \`$ac_cv_prog_cc_shlib' to build shared libraries" 1>&2

  if echo "$old_CC $old_CFLAGS " | egrep -e "[  ]$ac_cv_prog_cc_shlib[  ]" >/dev/null; then :

  else

    echo "$progname: add \`$ac_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2

    ac_cv_prog_cc_can_build_shared=no

  fi

fi

echo $ac_n "checking if $compiler static flag $ac_cv_prog_cc_static works... $ac_c" 1>&6

echo "$progname:749: checking if $compiler static flag $ac_cv_prog_cc_static works" >&5

if test "X${ac_cv_prog_cc_static_works+set}" = Xset && \

   test "X${ac_cv_prog_cc_static_works}" != X; then

  echo $ac_n "(cached) $ac_c" 1>&6

else

  $rm conftest*

  echo $lt_simple_link_test_code > conftest.$ac_ext

  save_LDFLAGS="$LDFLAGS"

  LDFLAGS="$LDFLAGS $ac_cv_prog_cc_static"

  if { (eval echo $progname:758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then

    ac_cv_prog_cc_static_works=yes

  else

    ac_cv_prog_cc_static_works=no

    ac_cv_prog_cc_static=

  fi

  LDFLAGS="$save_LDFLAGS"

  $rm conftest*

fi

# Belt *and* braces to stop my trousers falling down:

if test "X$ac_cv_prog_cc_static_works" = Xno; then

  ac_cv_prog_cc_static=

fi

echo "$ac_t""$ac_cv_prog_cc_static_works" 1>&6

pic_flag="$ac_cv_prog_cc_pic"

special_shlib_compile_flags="$ac_cv_prog_cc_shlib"

wl="$ac_cv_prog_cc_wl"

link_static_flag="$ac_cv_prog_cc_static"

no_builtin_flag="$ac_cv_prog_cc_no_builtin"

can_build_shared="$ac_cv_prog_cc_can_build_shared"

# find the maximum length of command line arguments

echo "$progname:780: finding the maximum length of command line arguments" 1>&5

echo $ac_n "finding the maximum length of command line arguments... $ac_c" 1>&6

if test "${lt_cv_sys_max_cmd_len+set}" = set; then

  echo $ac_n "(cached) $ac_c" 1>&6

else

  i=0

  testring="ABCD"

  # If test is not a shell built-in, we'll probably end up computing a

  # maximum length that is only half of the actual maximum length, but

  # we can't tell.

  while test "X"`$CONFIG_SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \

             = "XX$testring" &&

          new_result=`expr "X$testring" : ".*" 2>&1` &&

          lt_cv_sys_max_cmd_len=$new_result &&

          test $i != 17 # 1/2 MB should be enough

  do

    i=`expr $i + 1`

    testring=$testring$testring

  done

  testring=

  # add a significant safety factor because C++ compilers can tack on massive amounts

  # of additional arguments before passing them to the linker.  1/4 should be good.

  len=`expr $lt_cv_sys_max_cmd_len \/ 4`

  lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len - $len`

fi

echo "$progname:@lineno@: result: $lt_cv_sys_max_cmd_len" 1>&5

echo "${ac_t}$lt_cv_sys_max_cmd_len" 1>&6

if test -n $lt_cv_sys_max_cmd_len ; then

  max_cmd_len=$lt_cv_sys_max_cmd_len

else

  max_cmd_len=none

fi

# Check to see if options -o and -c are simultaneously supported by compiler

echo $ac_n "checking if $compiler supports -c -o file.$objext... $ac_c" 1>&6

if test "${lt_cv_compiler_c_o+set}" = set; then

  echo $ac_n "(cached) $ac_c" 1>&6

else

  $rm -r conftest 2>/dev/null

  mkdir conftest

  cd conftest

  $rm conftest*

  echo $lt_simple_compile_test_code > conftest.$ac_ext

  mkdir out

  # According to Tom Tromey, Ian Lance Taylor reported there are C compilers

  # that will create temporary files in the current directory regardless of

  # the output directory.  Thus, making CWD read-only will cause this test

  # to fail, enabling locking or at least warning the user not to do parallel

  # builds.

  chmod -w .

  save_CFLAGS="$CFLAGS"

  CFLAGS="$CFLAGS -o out/conftest2.$objext"

  echo "$progname:833: checking if $compiler supports -c -o file.$objext" >&5

  if { (eval echo $progname:834: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$objext; then

    # The compiler can only warn and ignore the option if not recognized

    # So say no if there are warnings

      if test -s out/conftest.err; then

        lt_cv_compiler_c_o=no

      else

        lt_cv_compiler_c_o=yes

      fi

  else

    # Append any errors to the config.log.

    cat out/conftest.err 1>&5

    lt_cv_compiler_c_o=no

  fi

  CFLAGS="$save_CFLAGS"

  chmod u+w .

  $rm conftest* out/*

  rmdir out

  cd ..

  rmdir conftest

  $rm -r conftest 2>/dev/null

fi

compiler_c_o=$lt_cv_compiler_c_o

echo "${ac_t}$compiler_c_o" 1>&6

# Check to see if we can do hard links to lock some files if needed

hard_links="nottested"

if test "$compiler_c_o" = no && test "$need_locks" != no; then

  # do not overwrite the value of need_locks provided by the user

  echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6

  hard_links=yes

  $rm conftest*

  ln conftest.a conftest.b 2>/dev/null && hard_links=no

  touch conftest.a

  ln conftest.a conftest.b 2>&5 || hard_links=no

  ln conftest.a conftest.b 2>/dev/null && hard_links=no

  echo "$ac_t$hard_links" 1>&6

  $rm conftest*

  if test "$hard_links" = no; then

    echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2

    need_locks=warn

  fi

else

  need_locks=no

fi

if test "$with_gcc" = yes; then

  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler

  echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6

  $rm conftest*

  echo $lt_simple_compile_test_code > conftest.$ac_ext

  save_CFLAGS="$CFLAGS"

  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"

  echo "$progname:887: checking if $compiler supports -fno-rtti -fno-exceptions" >&5

  if { (eval echo $progname:888: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then

    # The compiler can only warn and ignore the option if not recognized

    # So say no if there are warnings

      if test -s conftest.err; then

        echo "$ac_t"no 1>&6

        compiler_rtti_exceptions=no

      else

        echo "$ac_t"yes 1>&6

        compiler_rtti_exceptions=yes

      fi

  else

    # Append any errors to the config.log.

    cat conftest.err 1>&5

    compiler_rtti_exceptions=no

    echo "$ac_t"no 1>&6

  fi

  CFLAGS="$save_CFLAGS"

  $rm conftest*

  if test "$compiler_rtti_exceptions" = "yes"; then

    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'

  else

    no_builtin_flag=' -fno-builtin'

  fi

fi

# See if the linker supports building shared libraries.

echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6

echo "$ac_t$ld_shlibs" 1>&6

test "$ld_shlibs" = no && can_build_shared=no

# Check hardcoding attributes.

echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6

hardcode_action=

if test -n "$hardcode_libdir_flag_spec" || \

   test -n "$runpath_var"; then

  # We can hardcode non-existant directories.

  if test "$hardcode_direct" != no &&

     # If the only mechanism to avoid hardcoding is shlibpath_var, we

     # have to relink, otherwise we might link with an installed library

     # when we should be linking with a yet-to-be-installed one

     ## test "$hardcode_shlibpath_var" != no &&

     test "$hardcode_minus_L" != no; then

    # Linking always hardcodes the temporary library directory.

    hardcode_action=relink

  else