Subversion Repositories openrisc_2011-10-31

------------------------------------------------------------------------------

--                                                                          --

--                         GNAT COMPILER COMPONENTS                         --

--                                                                          --

--                             L I B . X R E F                              --

--                                                                          --

--                                 S p e c                                  --

--                                                                          --

--          Copyright (C) 1998-2009, Free Software Foundation, Inc.         --

--                                                                          --

-- GNAT is free software;  you can  redistribute it  and/or modify it under --

-- terms of the  GNU General Public License as published  by the Free Soft- --

-- ware  Foundation;  either version 3,  or (at your option) any later ver- --

-- sion.  GNAT is distributed in the hope that it will be useful, but WITH- --

-- OUT ANY WARRANTY;  without even the  implied warranty of MERCHANTABILITY --

-- or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License --

-- for  more details.  You should have  received  a copy of the GNU General --

-- Public License  distributed with GNAT; see file COPYING3.  If not, go to --

-- http://www.gnu.org/licenses for a complete copy of the license.          --

--                                                                          --

-- GNAT was originally developed  by the GNAT team at  New York University. --

-- Extensive contributions were provided by Ada Core Technologies Inc.      --

--                                                                          --

------------------------------------------------------------------------------

--  This package contains for collecting and outputting cross-reference

--  information.

with Einfo; use Einfo;

package Lib.Xref is

   -------------------------------------------------------

   -- Format of Cross-Reference Information in ALI File --

   -------------------------------------------------------

   --  Cross-reference sections follow the dependency section (D lines) in

   --  an ALI file, so that they need not be read by gnatbind, gnatmake etc.

   --  A cross reference section has a header of the form

   --     X  dependency-number  filename

   --        This header precedes xref information (entities/references from

   --        the unit), identified by dependency number and file name. The

   --        dependency number is the index into the generated D lines and

   --        is ones origin (i.e. 2 = reference to second generated D line).

   --        Note that the filename here will reflect the original name if

   --        a Source_Reference pragma was encountered (since all line number

   --        references will be with respect to the original file).

   --  The lines following the header look like

   --  line type col level entity renameref instref typeref overref ref  ref

   --        line is the line number of the referenced entity. The name of

   --        the entity starts in column col. Columns are numbered from one,

   --        and if horizontal tab characters are present, the column number

   --        is computed assuming standard 1,9,17,.. tab stops. For example,

   --        if the entity is the first token on the line, and is preceded

   --        by space-HT-space, then the column would be column 10.

   --        type is a single letter identifying the type of the entity.

   --        See next section (Cross-Reference Entity Identifiers) for a

   --        full list of the characters used).

   --        col is the column number of the referenced entity

   --        level is a single character that separates the col and

   --        entity fields. It is an asterisk for a top level library

   --        entity that is publicly visible, as well for an entity declared

   --        in the visible part of a generic package, and space otherwise.

   --        entity is the name of the referenced entity, with casing in

   --        the canonical casing for the source file where it is defined.

   --        renameref provides information on renaming. If the entity is

   --        a package, object or overloadable entity which is declared by

   --        a renaming declaration, and the renaming refers to an entity

   --        with a simple identifier or expanded name, then renameref has

   --        the form:

   --            =line:col

   --        Here line:col give the reference to the identifier that

   --        appears in the renaming declaration. Note that we never need

   --        a file entry, since this identifier is always in the current

   --        file in which the entity is declared. Currently, renameref

   --        appears only for the simple renaming case. If the renaming

   --        reference is a complex expressions, then renameref is omitted.

   --        Here line/col give line/column as defined above.

   --        instref is only present for package and subprogram instances.

   --        The information in instref is the location of the point of

   --        declaration of the generic parent unit. This part has the form:

   --            [file|line]

   --        without column information, on the reasonable assumption that

   --        there is only one unit per line (the same assumption is made

   --        in references to entities that are declared within instances,

   --        see below).

   --        typeref is the reference for a related type. This part is

   --        optional. It is present for the following cases:

   --          derived types (points to the parent type)   LR=<>

   --          access types (points to designated type)    LR=()

   --          array types (points to component type)      LR=()

   --          subtypes (points to ancestor type)          LR={}

   --          functions (points to result type)           LR={}

   --          enumeration literals (points to enum type)  LR={}

   --          objects and components (points to type)     LR={}

   --          For a type that implements multiple interfaces, there is an

   --          entry of the form  LR=<> for each of the interfaces appearing

   --          in the type declaration. In the data structures of ali.ads,

   --          the type that the entity extends (or the first interface if

   --          there is no such type) is stored in Xref_Entity_Record.Tref*,

   --          additional interfaces are stored in the list of references

   --          with a special type of Interface_Reference.

   --          For an array type, there is an entry of the form LR=<> for

   --          each of the index types appearing in the type declaration.

   --          The index types follow the entry for the component type.

   --          In the data structures of ali.ads, however, the list of index

   --          types are output in the list of references with a special

   --          Rtype set to Array_Index_Reference.

   --          In the above list LR shows the brackets used in the output,

   --          which has one of the two following forms:

   --            L file | line type col R      user entity

   --            L name-in-lower-case R        standard entity

   --          For the form for a user entity, file is the dependency number

   --          of the file containing the declaration of the related type.

   --          This number and the following vertical bar are omitted if the

   --          relevant type is defined in the same file as the current entity.

   --          The line, type, col are defined as previously described, and

   --          specify the location of the relevant type declaration in the

   --          referenced file. For the standard entity form, the name between

   --          the brackets is the normal name of the entity in lower case.

   --        overref is present for overriding operations (procedures and

   --        functions), and provides information on the operation that it

   --        overrides. This information has the format:

   --        '<' file | line 'o' col '>'

   --           file is the dependency number of the file containing the

   --           declaration of the overridden operation. It and the following

   --           vertical bar are omitted if the file is the same as that of

   --           the overriding operation.

   --     There may be zero or more ref entries on each line

   --        file | line type col [...]

   --           file is the dependency number of the file with the reference.

   --           It and the following vertical bar are omitted if the file is

   --           the same as the previous ref, and the refs for the current

   --           file are first (and do not need a bar).

   --           line is the line number of the reference

   --           col is the column number of the reference, as defined above

   --           type is one of

   --              b = body entity

   --              c = completion of private or incomplete type

   --              d = discriminant of type

   --              e = end of spec

   --              H = abstract type

   --              i = implicit reference

   --              k = implicit reference to parent unit in child unit

   --              l = label on END line

   --              m = modification

   --              o = own variable reference (SPARK only)

   --              p = primitive operation

   --              P = overriding primitive operation

   --              r = reference

   --              R = subprogram reference in dispatching call

   --              t = end of body

   --              w = WITH line

   --              x = type extension

   --              z = generic formal parameter

   --              > = subprogram IN parameter

   --              = = subprogram IN OUT parameter

   --              < = subprogram OUT parameter

   --              ^ = subprogram ACCESS parameter

   --           b is used for spec entities that are repeated in a body,

   --           including the unit (subprogram, package, task, protected

   --           body, protected entry) name itself, and in the case of a

   --           subprogram, the formals. This letter is also used for the

   --           occurrence of entry names in accept statements. Such entities

   --           are not considered to be definitions for cross-referencing

   --           purposes, but rather are considered to be references to the

   --           corresponding spec entities, marked with this special type.

   --           c is similar to b but is used to mark the completion of a

   --           private or incomplete type. As with b, the completion is not

   --           regarded as a separate definition, but rather a reference to

   --           the initial declaration, marked with this special type.

   --           d is used to identify a discriminant of a type. If this is

   --           an incomplete or private type with discriminants, the entry

   --           denotes the occurrence of the discriminant in the partial view

   --           which is also the point of definition of the discriminant.

   --           The occurrence of the same discriminant in the full view is

   --           a regular reference to it.

   --           e is used to identify the end of a construct in the following

   --           cases:

   --             Block Statement        end [block_IDENTIFIER];

   --             Loop Statement         end loop [loop_IDENTIFIER];

   --             Package Specification  end [[PARENT_UNIT_NAME .] IDENTIFIER];

   --             Task Definition        end [task_IDENTIFIER];

   --             Protected Definition   end [protected_IDENTIFIER];

   --             Record Definition      end record;

   --             Enumeration Definition );

   --           Note that 'e' entries are special in that they appear even

   --           in referencing units (normally xref entries appear only

   --           for references in the extended main source unit (see Lib) to

   --           which the ali applies. But 'e' entries are really structural

   --           and simply indicate where packages end. This information can

   --           be used to reconstruct scope information for any entities

   --           referenced from within the package. The line/column values

   --           for these entries point to the semicolon ending the construct.

   --           i is used to identify a reference to the entity in a generic

   --           actual or in a default in a call. The node that denotes the

   --           entity does not come from source, but it has the Sloc of the

   --           source node that generates the implicit reference, and it is

   --           useful to record this one.

   --           k is another non-standard reference type, used to record a

   --           reference from a child unit to its parent. For various cross-

   --           referencing tools, we need a pointer from the xref entries for

   --           the child to the parent. This is the opposite way round from

   --           normal xref entries, since the reference is *from* the child

   --           unit *to* the parent unit, yet appears in the xref entries for

   --           the child. Consider this example:

   --

   --             package q is

   --             end;

   --             package q.r is

   --             end q.r;

   --

   --           The ali file for q-r.ads has these entries

   --

   --             D q.ads

   --             D q-r.ads

   --             D system.ads

   --             X 1 q.ads

   --             1K9*q 2e4 2|1r9 2r5

   --             X 2 q-r.ads

   --             1K11*r 1|1k9 2|2l7 2e8

   --

   --           Here the 2|1r9 entry appearing in the section for the parent

   --           is the normal reference from the child to the parent. The 1k9

   --           entry in the section for the child duplicates this information

   --           but appears in the child rather than the parent.

   --           l is used to identify the occurrence in the source of the

   --           name on an end line. This is just a syntactic reference

   --           which can be ignored for semantic purposes (such as call

   --           graph construction). Again, in the case of an accept there

   --           can be multiple l lines.

   --           o is used for variables referenced from a SPARK 'own'

   --           definition. In the SPARK language, it is allowed to use a

   --           variable before its actual declaration.

   --           p is used to mark a primitive operation of the given entity.

   --           For example, if we have a type Tx, and a primitive operation

   --           Pq of this type, then an entry in the list of references to

   --           Tx will point to the declaration of Pq. Note that this entry

   --           type is unusual because it an implicit rather than explicit,

   --           and the name of the reference does not match the name of the

   --           entity for which a reference is generated. These entries are

   --           generated only for entities declared in the extended main

   --           source unit (main unit itself, its separate spec (if any).

   --           and all subunits (considered recursively).

   --           If the primitive operation overrides an inherited primitive

   --           operation of the parent type, the letter 'P' is used in the

   --           corresponding entry.

   --           R is used to mark a dispatching call. The reference is to

   --           the specification of the primitive operation of the root

   --           type when the call has a controlling argument in its class.

   --           t is similar to e. It identifies the end of a corresponding

   --           body (such a reference always links up with a b reference)

   --             Subprogram Body        end [DESIGNATOR];

   --             Package Body           end [[PARENT_UNIT_NAME .] IDENTIFIER];

   --             Task Body              end [task_IDENTIFIER];

   --             Entry Body             end [entry_IDENTIFIER];

   --             Protected Body         end [protected_IDENTIFIER]

   --             Accept Statement       end [entry_IDENTIFIER]];

   --           Note that in the case of accept statements, there can

   --           be multiple b and t entries for the same entity.

   --           x is used to identify the reference as the entity from which

   --           a tagged type is extended. This allows immediate access to

   --           the parent of a tagged type.

   --           z is used on the cross-reference line for a generic unit, to

   --           mark the definition of a generic formal of the unit.

   --           This entry type is similar to 'k' and 'p' in that it is an

   --           implicit reference for an entity with a different name.

   --           The characters >, <. =, and ^ are used on the cross-reference

   --           line for a subprogram, to denote formal parameters and their

   --           modes. As with the 'z' and 'p' entries, each such entry is

   --           an implicit reference to an entity with a different name.

   --           [..] is used for generic instantiation references. These

   --           references are present only if the entity in question is

   --           a generic entity, and in that case the [..] contains the

   --           reference for the instantiation. In the case of nested

   --           instantiations, this can be nested [...[...[...]]] etc.

   --           The reference is of the form [file|line] no column is

   --           present since it is assumed that only one instantiation

   --           appears on a single source line. Note that the appearance

   --           of file numbers in such references follows the normal

   --           rules (present only if needed, and resets the current

   --           file for subsequent references).

   --     Examples:

   --        44B5*Flag_Type{boolean} 5r23 6m45 3|9r35 11r56

   --           This line gives references for the publicly visible Boolean

   --           type Flag_Type declared on line 44, column 5. There are four

   --           references

   --              a reference on line 5, column 23 of the current file

   --              a modification on line 6, column 45 of the current file

   --              a reference on line 9, column 35 of unit number 3

   --              a reference on line 11, column 56 of unit number 3

   --        2U13 p3=2:35 5b13 8r4 12r13 12t15

   --           This line gives references for the non-publicly visible

   --           procedure p3 declared on line 2, column 13. This procedure

   --           renames the procedure whose identifier reference is at

   --           line 2 column 35. There are four references:

   --              the corresponding body entity at line 5, column 13,

   --              of the current file.

   --              a reference (e.g. a call) at line 8 column 4 of the

   --              of the current file.

   --              the END line of the body has an explicit reference to

   --              the name of the procedure at line 12, column 13.

   --              the body ends at line 12, column 15, just past this label

   --        16I9*My_Type<2|4I9> 18r8

   --           This line gives references for the publicly visible Integer

   --           derived type My_Type declared on line 16, column 9. It also

   --           gives references to the parent type declared in the unit

   --           number 2 on line 4, column 9. There is one reference:

   --              a reference (e.g. a variable declaration) at line 18 column

   --              4 of the current file.

   --        10I3*Genv{integer} 3|4I10[6|12]

   --           This line gives a reference for the entity Genv in a generic

   --           package. The reference in file 3, line 4, col 10, refers to

   --           an instance of the generic where the instantiation can be

   --           found in file 6 at line 12.

   --  Continuation lines are used if the reference list gets too long,

   --  a continuation line starts with a period, and then has references

   --  continuing from the previous line. The references are sorted first

   --  by unit, then by position in the source.

   --  Note on handling of generic entities. The cross-reference is oriented

   --  towards source references, so the entities in a generic instantiation

   --  are not considered distinct from the entities in the template. All

   --  definitions and references from generic instantiations are suppressed,

   --  since they will be generated from the template. Any references to

   --  entities in a generic instantiation from outside the instantiation

   --  are considered to be references to the original template entity.

   ----------------------------------------

   -- Cross-Reference Entity Identifiers --

   ----------------------------------------

   --  In the cross-reference section of the ali file, entity types are

   --  identified by a single letter, indicating the entity type. The

   --  following table indicates the letter. A space for an entry is

   --  used for entities that do not appear in the cross-reference table.

   --  For objects, the character * appears in this table. In the xref

   --  listing, this character is replaced by the lower case letter that

   --  corresponds to the type of the object. For example, if a variable

   --  is of a Float type, then, since the type is represented by an

   --  upper case F, the object would be represented by a lower case f.

   --  A special exception is the case of booleans, whose entities are

   --  normal E_Enumeration_Type or E_Enumeration_Subtype entities, but

   --  which appear as B/b in the xref lines, rather than E/e.

   --  For private types, the character + appears in the table. In this

   --  case the kind of the underlying type is used, if available, to

   --  determine the character to use in the xref listing. The listing

   --  will still include a '+' for a generic private type, for example,

   --  but will retain the '*' for an object or formal parameter of such

   --  a type.

   --  For subprograms, the characters 'U' and 'V' appear in the table,

   --  indicating procedures and functions. If the operation is abstract,

   --  these letters are replaced in the xref by 'x' and 'y' respectively.

   Xref_Entity_Letters : array (Entity_Kind) of Character :=

     (E_Void                                       => ' ',

      E_Variable                                   => '*',

      E_Component                                  => '*',

      E_Constant                                   => '*',

      E_Discriminant                               => '*',

      E_Loop_Parameter                             => '*',

      E_In_Parameter                               => '*',

      E_Out_Parameter                              => '*',

      E_In_Out_Parameter                           => '*',

      E_Generic_In_Out_Parameter                   => '*',

      E_Generic_In_Parameter                       => '*',

      E_Named_Integer                              => 'N',

      E_Named_Real                                 => 'N',

      E_Enumeration_Type                           => 'E',  -- B for boolean

      E_Enumeration_Subtype                        => 'E',  -- B for boolean

      E_Signed_Integer_Type                        => 'I',

      E_Signed_Integer_Subtype                     => 'I',

      E_Modular_Integer_Type                       => 'M',

      E_Modular_Integer_Subtype                    => 'M',

      E_Ordinary_Fixed_Point_Type                  => 'O',

      E_Ordinary_Fixed_Point_Subtype               => 'O',

      E_Decimal_Fixed_Point_Type                   => 'D',

      E_Decimal_Fixed_Point_Subtype                => 'D',

      E_Floating_Point_Type                        => 'F',

      E_Floating_Point_Subtype                     => 'F',

      E_Access_Type                                => 'P',

      E_Access_Subtype                             => 'P',

      E_Access_Attribute_Type                      => 'P',

      E_Allocator_Type                             => ' ',

      E_General_Access_Type                        => 'P',

      E_Access_Subprogram_Type                     => 'P',

      E_Access_Protected_Subprogram_Type           => 'P',

      E_Anonymous_Access_Subprogram_Type           => ' ',

      E_Anonymous_Access_Protected_Subprogram_Type => ' ',

      E_Anonymous_Access_Type                      => ' ',

      E_Array_Type                                 => 'A',

      E_Array_Subtype                              => 'A',

      E_String_Type                                => 'S',

      E_String_Subtype                             => 'S',

      E_String_Literal_Subtype                     => ' ',

      E_Class_Wide_Type                            => 'C',

      E_Class_Wide_Subtype                         => 'C',

      E_Record_Type                                => 'R',

      E_Record_Subtype                             => 'R',

      E_Record_Type_With_Private                   => 'R',

      E_Record_Subtype_With_Private                => 'R',

      E_Private_Type                               => '+',

      E_Private_Subtype                            => '+',

      E_Limited_Private_Type                       => '+',

      E_Limited_Private_Subtype                    => '+',

      E_Incomplete_Type                            => '+',

      E_Incomplete_Subtype                         => '+',

      E_Task_Type                                  => 'T',

      E_Task_Subtype                               => 'T',

      E_Protected_Type                             => 'W',

      E_Protected_Subtype                          => 'W',

      E_Exception_Type                             => ' ',

      E_Subprogram_Type                            => ' ',

      E_Enumeration_Literal                        => 'n',

      E_Function                                   => 'V',

      E_Operator                                   => 'V',

      E_Procedure                                  => 'U',

      E_Entry                                      => 'Y',

      E_Entry_Family                               => 'Y',

      E_Block                                      => 'q',

      E_Entry_Index_Parameter                      => '*',

      E_Exception                                  => 'X',

      E_Generic_Function                           => 'v',

      E_Generic_Package                            => 'k',

      E_Generic_Procedure                          => 'u',

      E_Label                                      => 'L',

      E_Loop                                       => 'l',

      E_Return_Statement                           => ' ',

      E_Package                                    => 'K',

      --  The following entities are not ones to which we gather

      --  cross-references, since it does not make sense to do so

      --  (e.g. references to a package are to the spec, not the body)

      --  Indeed the occurrence of the body entity is considered to

      --  be a reference to the spec entity.

      E_Package_Body                               => ' ',

      E_Protected_Object                           => ' ',

      E_Protected_Body                             => ' ',

      E_Task_Body                                  => ' ',

      E_Subprogram_Body                            => ' ');

   --  The following table is for information purposes. It shows the

   --  use of each character appearing as an entity type.

   --  letter  lower case usage                UPPER CASE USAGE

   --    a     array object (except string)    array type (except string)

   --    b     Boolean object                  Boolean type

   --    c     class-wide object               class-wide type

   --    d     decimal fixed-point object      decimal fixed-point type

   --    e     non-Boolean enumeration object  non_Boolean enumeration type

   --    f     floating-point object           floating-point type

   --    g     (unused)                        (unused)

   --    h     Interface (Ada 2005)            Abstract type

   --    i     signed integer object           signed integer type

   --    j     (unused)                        (unused)

   --    k     generic package                 package

   --    l     label on loop                   label on statement

   --    m     modular integer object          modular integer type

   --    n     enumeration literal             named number

   --    o     ordinary fixed-point object     ordinary fixed-point type

   --    p     access object                   access type

   --    q     label on block                  (unused)

   --    r     record object                   record type

   --    s     string object                   string type

   --    t     task object                     task type

   --    u     generic procedure               procedure

   --    v     generic function or operator    function or operator

   --    w     protected object                protected type

   --    x     abstract procedure              exception

   --    y     abstract function               entry or entry family

   --    z     generic formal parameter        (unused)

   --------------------------------------

   -- Handling of Imported Subprograms --

   --------------------------------------

   --  If a pragma Import or Interface applies to a subprogram, the

   --  pragma is the completion of the subprogram. This is noted in

   --  the ALI file by making the occurrence of the subprogram in the

   --  pragma into a body reference ('b') and by including the external

   --  name of the subprogram and its language, bracketed by '<' and '>'

   --  in that reference. For example:

   --

   --     3U13*elsewhere 4b<c,there>21

   --

   --  indicates that procedure elsewhere, declared at line 3, has a

   --  pragma Import at line 4, that its body is in C, and that the link

   --  name as given in the pragma is "there".

   -----------------

   -- Subprograms --

   -----------------

   procedure Generate_Definition (E : Entity_Id);

   --  Records the definition of an entity

   procedure Generate_Operator_Reference

     (N : Node_Id;

      T : Entity_Id);

   --  Node N is an operator node, whose entity has been set. If this entity

   --  is a user defined operator (i.e. an operator not defined in package

   --  Standard), then a reference to the operator is recorded at node N.

   --  T is the operand type of the operator. A reference to the operator

   --  is an implicit reference to the type, and that needs to be recorded

   --  to avoid spurious warnings on unused entities, when the operator is

   --  a renaming of a predefined operator.

   procedure Generate_Reference

     (E       : Entity_Id;

      N       : Node_Id;

      Typ     : Character := 'r';

      Set_Ref : Boolean   := True;

      Force   : Boolean   := False);

   --  This procedure is called to record a reference. N is the location

   --  of the reference and E is the referenced entity. Typ is one of:

   --

   --    'b'  body entity

   --    'c'  completion of incomplete or private type (see below)

   --    'e'  end of construct

   --    'i'  implicit reference

   --    'l'  label on end line

   --    'm'  modification

   --    'p'  primitive operation

   --    'r'  standard reference

   --    't'  end of body

   --    'x'  type extension

   --    ' '  dummy reference (see below)

   --

   --  Note: all references to incomplete or private types are to the

   --  original (incomplete or private type) declaration. The full

   --  declaration is treated as a reference with type 'c'.

   --

   --  Note: all references to packages or subprograms are to the entity

   --  for the spec. The entity in the body is treated as a reference

   --  with type 'b'. Similar handling for references to subprogram formals.

   --

   --  The call has no effect if N is not in the extended main source unit

   --  This check is omitted for type 'e' references (where it is useful to

   --  have structural scoping information for other than the main source),

   --  and for 'p' (since we want to pick up inherited primitive operations

   --  that are defined in other packages).

   --

   --  The call also has no effect if any of the following conditions hold:

   --

   --    cross-reference collection is disabled

   --    entity does not come from source (and Force is False)

   --    reference does not come from source (and Force is False)

   --    the entity is not one for which xrefs are appropriate

   --    the type letter is blank

   --    the node N is not an identifier, defining identifier, or expanded name

   --    the type is 'p' and the entity is not in the extended main source

   --

   --  If all these conditions are met, then the Is_Referenced flag of E is set

   --  (unless Set_Ref is False) and a cross-reference entry is recorded for

   --  later output when Output_References is called.

   --

   --  Note: the dummy space entry is for the convenience of some callers,

   --  who find it easier to pass a space to suppress the entry than to do

   --  a specific test. The call has no effect if the type is a space.

   --

   --  The parameter Set_Ref is normally True, and indicates that in addition

   --  to generating a cross-reference, the Referenced flag of the specified

   --  entity should be set. If this parameter is False, then setting of the

   --  Referenced flag is inhibited.

   --

   --  The parameter Force is set to True to force a reference to be generated

   --  even if Comes_From_Source is false. This is used for certain implicit

   --  references, and also for end label references.

   procedure Generate_Reference_To_Formals (E : Entity_Id);

   --  Add a reference to the definition of each formal on the line for

   --  a subprogram.

   procedure Generate_Reference_To_Generic_Formals (E : Entity_Id);

   --  Add a reference to the definition of each generic formal on the line

   --  for a generic unit.

   procedure Output_References;

   --  Output references to the current ali file

   procedure Initialize;

   --  Initialize internal tables

end Lib.Xref;