Subversion Repositories openrisc_me

;; ARM 1020E & ARM 1022E Pipeline Description

;; Copyright (C) 2005, 2007, 2008 Free Software Foundation, Inc.

;; Contributed by Richard Earnshaw (richard.earnshaw@arm.com)

;;

;; This file is part of GCC.

;;

;; GCC is free software; you can redistribute it and/or modify it

;; under the terms of the GNU General Public License as published by

;; the Free Software Foundation; either version 3, or (at your option)

;; any later version.

;;

;; GCC is distributed in the hope that it will be useful, but

;; WITHOUT ANY WARRANTY; without even the implied warranty of

;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

;; General Public License for more details.

;;

;; You should have received a copy of the GNU General Public License

;; along with GCC; see the file COPYING3.  If not see

;; .  */

;; These descriptions are based on the information contained in the

;; ARM1020E Technical Reference Manual, Copyright (c) 2003 ARM

;; Limited.

;;

;; This automaton provides a pipeline description for the ARM

;; 1020E core.

;;

;; The model given here assumes that the condition for all conditional

;; instructions is "true", i.e., that all of the instructions are

;; actually executed.

(define_automaton "arm1020e")

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; Pipelines

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; There are two pipelines:

;;

;; - An Arithmetic Logic Unit (ALU) pipeline.

;;

;;   The ALU pipeline has fetch, issue, decode, execute, memory, and

;;   write stages. We only need to model the execute, memory and write

;;   stages.

;;

;; - A Load-Store Unit (LSU) pipeline.

;;

;;   The LSU pipeline has decode, execute, memory, and write stages.

;;   We only model the execute, memory and write stages.

(define_cpu_unit "1020a_e,1020a_m,1020a_w" "arm1020e")

(define_cpu_unit "1020l_e,1020l_m,1020l_w" "arm1020e")

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; ALU Instructions

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; ALU instructions require three cycles to execute, and use the ALU

;; pipeline in each of the three stages.  The results are available

;; after the execute stage stage has finished.

;;

;; If the destination register is the PC, the pipelines are stalled

;; for several cycles.  That case is not modeled here.

;; ALU operations with no shifted operand

(define_insn_reservation "1020alu_op" 1

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "type" "alu"))

 "1020a_e,1020a_m,1020a_w")

;; ALU operations with a shift-by-constant operand

(define_insn_reservation "1020alu_shift_op" 1

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "type" "alu_shift"))

 "1020a_e,1020a_m,1020a_w")

;; ALU operations with a shift-by-register operand

;; These really stall in the decoder, in order to read

;; the shift value in a second cycle. Pretend we take two cycles in

;; the execute stage.

(define_insn_reservation "1020alu_shift_reg_op" 2

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "type" "alu_shift_reg"))

 "1020a_e*2,1020a_m,1020a_w")

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; Multiplication Instructions

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; Multiplication instructions loop in the execute stage until the

;; instruction has been passed through the multiplier array enough

;; times.

;; The result of the "smul" and "smulw" instructions is not available

;; until after the memory stage.

(define_insn_reservation "1020mult1" 2

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "insn" "smulxy,smulwy"))

 "1020a_e,1020a_m,1020a_w")

;; The "smlaxy" and "smlawx" instructions require two iterations through

;; the execute stage; the result is available immediately following

;; the execute stage.

(define_insn_reservation "1020mult2" 2

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "insn" "smlaxy,smlalxy,smlawx"))

 "1020a_e*2,1020a_m,1020a_w")

;; The "smlalxy", "mul", and "mla" instructions require two iterations

;; through the execute stage; the result is not available until after

;; the memory stage.

(define_insn_reservation "1020mult3" 3

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "insn" "smlalxy,mul,mla"))

 "1020a_e*2,1020a_m,1020a_w")

;; The "muls" and "mlas" instructions loop in the execute stage for

;; four iterations in order to set the flags.  The value result is

;; available after three iterations.

(define_insn_reservation "1020mult4" 3

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "insn" "muls,mlas"))

 "1020a_e*4,1020a_m,1020a_w")

;; Long multiply instructions that produce two registers of

;; output (such as umull) make their results available in two cycles;

;; the least significant word is available before the most significant

;; word.  That fact is not modeled; instead, the instructions are

;; described.as if the entire result was available at the end of the

;; cycle in which both words are available.

;; The "umull", "umlal", "smull", and "smlal" instructions all take

;; three iterations through the execute cycle, and make their results

;; available after the memory cycle.

(define_insn_reservation "1020mult5" 4

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "insn" "umull,umlal,smull,smlal"))

 "1020a_e*3,1020a_m,1020a_w")

;; The "umulls", "umlals", "smulls", and "smlals" instructions loop in

;; the execute stage for five iterations in order to set the flags.

;; The value result is available after four iterations.

(define_insn_reservation "1020mult6" 4

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "insn" "umulls,umlals,smulls,smlals"))

 "1020a_e*5,1020a_m,1020a_w")

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; Load/Store Instructions

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; The models for load/store instructions do not accurately describe

;; the difference between operations with a base register writeback

;; (such as "ldm!").  These models assume that all memory references

;; hit in dcache.

;; LSU instructions require six cycles to execute.  They use the ALU

;; pipeline in all but the 5th cycle, and the LSU pipeline in cycles

;; three through six.

;; Loads and stores which use a scaled register offset or scaled

;; register pre-indexed addressing mode take three cycles EXCEPT for

;; those that are base + offset with LSL of 0 or 2, or base - offset

;; with LSL of zero.  The remainder take 1 cycle to execute.

;; For 4byte loads there is a bypass from the load stage

(define_insn_reservation "1020load1_op" 2

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "type" "load_byte,load1"))

 "1020a_e+1020l_e,1020l_m,1020l_w")

(define_insn_reservation "1020store1_op" 0

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "type" "store1"))

 "1020a_e+1020l_e,1020l_m,1020l_w")

;; A load's result can be stored by an immediately following store

(define_bypass 1 "1020load1_op" "1020store1_op" "arm_no_early_store_addr_dep")

;; On a LDM/STM operation, the LSU pipeline iterates until all of the

;; registers have been processed.

;;

;; The time it takes to load the data depends on whether or not the

;; base address is 64-bit aligned; if it is not, an additional cycle

;; is required.  This model assumes that the address is always 64-bit

;; aligned.  Because the processor can load two registers per cycle,

;; that assumption means that we use the same instruction reservations

;; for loading 2k and 2k - 1 registers.

;;

;; The ALU pipeline is decoupled after the first cycle unless there is

;; a register dependency; the dependency is cleared as soon as the LDM/STM

;; has dealt with the corresponding register.  So for example,

;;  stmia sp, {r0-r3}

;;  add r0, r0, #4

;; will have one fewer stalls than

;;  stmia sp, {r0-r3}

;;  add r3, r3, #4

;;

;; As with ALU operations, if one of the destination registers is the

;; PC, there are additional stalls; that is not modeled.

(define_insn_reservation "1020load2_op" 2

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "type" "load2"))

 "1020a_e+1020l_e,1020l_m,1020l_w")

(define_insn_reservation "1020store2_op" 0

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "type" "store2"))

 "1020a_e+1020l_e,1020l_m,1020l_w")

(define_insn_reservation "1020load34_op" 3

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "type" "load3,load4"))

 "1020a_e+1020l_e,1020l_e+1020l_m,1020l_m,1020l_w")

(define_insn_reservation "1020store34_op" 0

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "type" "store3,store4"))

 "1020a_e+1020l_e,1020l_e+1020l_m,1020l_m,1020l_w")

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; Branch and Call Instructions

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; Branch instructions are difficult to model accurately.  The ARM

;; core can predict most branches.  If the branch is predicted

;; correctly, and predicted early enough, the branch can be completely

;; eliminated from the instruction stream.  Some branches can

;; therefore appear to require zero cycles to execute.  We assume that

;; all branches are predicted correctly, and that the latency is

;; therefore the minimum value.

(define_insn_reservation "1020branch_op" 0

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "type" "branch"))

 "1020a_e")

;; The latency for a call is not predictable.  Therefore, we use 32 as

;; roughly equivalent to positive infinity.

(define_insn_reservation "1020call_op" 32

 (and (eq_attr "tune" "arm1020e,arm1022e")

      (eq_attr "type" "call"))

 "1020a_e*32")

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; VFP

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

(define_cpu_unit "v10_fmac" "arm1020e")

(define_cpu_unit "v10_ds" "arm1020e")

(define_cpu_unit "v10_fmstat" "arm1020e")

(define_cpu_unit "v10_ls1,v10_ls2,v10_ls3" "arm1020e")

;; fmstat is a serializing instruction.  It will stall the core until

;; the mac and ds units have completed.

(exclusion_set "v10_fmac,v10_ds" "v10_fmstat")

(define_attr "vfp10" "yes,no"

  (const (if_then_else (and (eq_attr "tune" "arm1020e,arm1022e")

                            (eq_attr "fpu" "vfp"))

                       (const_string "yes") (const_string "no"))))

;; Note, no instruction can issue to the VFP if the core is stalled in the

;; first execute state.  We model this by using 1020a_e in the first cycle.

(define_insn_reservation "v10_ffarith" 5

 (and (eq_attr "vfp10" "yes")

      (eq_attr "type" "fcpys,ffariths,ffarithd,fcmps,fcmpd"))

 "1020a_e+v10_fmac")

(define_insn_reservation "v10_farith" 5

 (and (eq_attr "vfp10" "yes")

      (eq_attr "type" "faddd,fadds"))

 "1020a_e+v10_fmac")

(define_insn_reservation "v10_cvt" 5

 (and (eq_attr "vfp10" "yes")

      (eq_attr "type" "f_cvt"))

 "1020a_e+v10_fmac")

(define_insn_reservation "v10_fmul" 6

 (and (eq_attr "vfp10" "yes")

      (eq_attr "type" "fmuls,fmacs,fmuld,fmacd"))

 "1020a_e+v10_fmac*2")

(define_insn_reservation "v10_fdivs" 18

 (and (eq_attr "vfp10" "yes")

      (eq_attr "type" "fdivs"))

 "1020a_e+v10_ds*14")

(define_insn_reservation "v10_fdivd" 32

 (and (eq_attr "vfp10" "yes")

      (eq_attr "type" "fdivd"))

 "1020a_e+v10_fmac+v10_ds*28")

(define_insn_reservation "v10_floads" 4

 (and (eq_attr "vfp10" "yes")

      (eq_attr "type" "f_loads"))

 "1020a_e+1020l_e+v10_ls1,v10_ls2")

;; We model a load of a double as needing all the vfp ls* stage in cycle 1.

;; This gives the correct mix between single-and double loads where a flds

;; followed by and fldd will stall for one cycle, but two back-to-back fldd

;; insns stall for two cycles.

(define_insn_reservation "v10_floadd" 5

 (and (eq_attr "vfp10" "yes")

      (eq_attr "type" "f_loadd"))

 "1020a_e+1020l_e+v10_ls1+v10_ls2+v10_ls3,v10_ls2+v10_ls3,v10_ls3")

;; Moves to/from arm regs also use the load/store pipeline.

(define_insn_reservation "v10_c2v" 4

 (and (eq_attr "vfp10" "yes")

      (eq_attr "type" "r_2_f"))

 "1020a_e+1020l_e+v10_ls1,v10_ls2")

(define_insn_reservation "v10_fstores" 1

 (and (eq_attr "vfp10" "yes")

      (eq_attr "type" "f_stores"))

 "1020a_e+1020l_e+v10_ls1,v10_ls2")

(define_insn_reservation "v10_fstored" 1

 (and (eq_attr "vfp10" "yes")

      (eq_attr "type" "f_stored"))

 "1020a_e+1020l_e+v10_ls1+v10_ls2+v10_ls3,v10_ls2+v10_ls3,v10_ls3")

(define_insn_reservation "v10_v2c" 1

 (and (eq_attr "vfp10" "yes")

      (eq_attr "type" "f_2_r"))

 "1020a_e+1020l_e,1020l_m,1020l_w")

(define_insn_reservation "v10_to_cpsr" 2

 (and (eq_attr "vfp10" "yes")

      (eq_attr "type" "f_flag"))

 "1020a_e+v10_fmstat,1020a_e+1020l_e,1020l_m,1020l_w")

;; VFP bypasses

;; There are bypasses for most operations other than store

(define_bypass 3

 "v10_c2v,v10_floads"

 "v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd,v10_cvt")

(define_bypass 4

 "v10_floadd"

 "v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd")

;; Arithmetic to other arithmetic saves a cycle due to forwarding

(define_bypass 4

 "v10_ffarith,v10_farith"

 "v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd")

(define_bypass 5

 "v10_fmul"

 "v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd")

(define_bypass 17

 "v10_fdivs"

 "v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd")

(define_bypass 31

 "v10_fdivd"

 "v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd")

;; VFP anti-dependencies.

;; There is one anti-dependence in the following case (not yet modelled):

;; - After a store: one extra cycle for both fsts and fstd

;; Note, back-to-back fstd instructions will overload the load/store datapath

;; causing a two-cycle stall.