OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.5.1/] [gcc/] [config/] [avr/] [avr.h] - Blame information for rev 282

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 282 jeremybenn
/* Definitions of target machine for GNU compiler,
2
   for ATMEL AVR at90s8515, ATmega103/103L, ATmega603/603L microcontrollers.
3
   Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
4
   2008, 2009, 2010
5
   Free Software Foundation, Inc.
6
   Contributed by Denis Chertykov (chertykov@gmail.com)
7
 
8
This file is part of GCC.
9
 
10
GCC is free software; you can redistribute it and/or modify
11
it under the terms of the GNU General Public License as published by
12
the Free Software Foundation; either version 3, or (at your option)
13
any later version.
14
 
15
GCC is distributed in the hope that it will be useful,
16
but WITHOUT ANY WARRANTY; without even the implied warranty of
17
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18
GNU General Public License for more details.
19
 
20
You should have received a copy of the GNU General Public License
21
along with GCC; see the file COPYING3.  If not see
22
<http://www.gnu.org/licenses/>.  */
23
 
24
/* Names to predefine in the preprocessor for this target machine.  */
25
 
26
struct base_arch_s {
27
  /* Assembler only.  */
28
  int asm_only;
29
 
30
  /* Core have 'MUL*' instructions.  */
31
  int have_mul;
32
 
33
  /* Core have 'CALL' and 'JMP' instructions.  */
34
  int have_jmp_call;
35
 
36
  /* Core have 'MOVW' and 'LPM Rx,Z' instructions.  */
37
  int have_movw_lpmx;
38
 
39
  /* Core have 'ELPM' instructions.  */
40
  int have_elpm;
41
 
42
  /* Core have 'ELPM Rx,Z' instructions.  */
43
  int have_elpmx;
44
 
45
  /* Core have 'EICALL' and 'EIJMP' instructions.  */
46
  int have_eijmp_eicall;
47
 
48
  /* Reserved for xmega architecture.  */
49
  int reserved;
50
 
51
  /* Reserved for xmega architecture.  */
52
  int reserved2;
53
 
54
  /* Default start of data section address for architecture.  */
55
  int default_data_section_start;
56
 
57
  const char *const macro;
58
 
59
  /* Architecture name.  */
60
  const char *const arch_name;
61
};
62
 
63
/* These names are used as the index into the avr_arch_types[] table
64
   above.  */
65
 
66
enum avr_arch
67
{
68
  ARCH_UNKNOWN,
69
  ARCH_AVR1,
70
  ARCH_AVR2,
71
  ARCH_AVR25,
72
  ARCH_AVR3,
73
  ARCH_AVR31,
74
  ARCH_AVR35,
75
  ARCH_AVR4,
76
  ARCH_AVR5,
77
  ARCH_AVR51,
78
  ARCH_AVR6
79
};
80
 
81
struct mcu_type_s {
82
  /* Device name.  */
83
  const char *const name;
84
 
85
  /* Index in avr_arch_types[].  */
86
  int arch;
87
 
88
  /* Must lie outside user's namespace.  NULL == no macro.  */
89
  const char *const macro;
90
 
91
  /* Stack pointer have 8 bits width.  */
92
  int short_sp;
93
 
94
  /* Start of data section.  */
95
  int data_section_start;
96
 
97
  /* Name of device library.  */
98
  const char *const library_name;
99
};
100
 
101
/* Preprocessor macros to define depending on MCU type.  */
102
extern const char *avr_extra_arch_macro;
103
extern const struct base_arch_s *avr_current_arch;
104
extern const struct mcu_type_s *avr_current_device;
105
extern const struct mcu_type_s avr_mcu_types[];
106
extern const struct base_arch_s avr_arch_types[];
107
 
108
#define TARGET_CPU_CPP_BUILTINS()       avr_cpu_cpp_builtins (pfile)
109
 
110
#if !defined(IN_LIBGCC2) && !defined(IN_TARGET_LIBS)
111
extern GTY(()) section *progmem_section;
112
#endif
113
 
114
#define AVR_HAVE_JMP_CALL (avr_current_arch->have_jmp_call && !TARGET_SHORT_CALLS)
115
#define AVR_HAVE_MUL (avr_current_arch->have_mul)
116
#define AVR_HAVE_MOVW (avr_current_arch->have_movw_lpmx)
117
#define AVR_HAVE_LPMX (avr_current_arch->have_movw_lpmx)
118
#define AVR_HAVE_RAMPZ (avr_current_arch->have_elpm)
119
#define AVR_HAVE_EIJMP_EICALL (avr_current_arch->have_eijmp_eicall)
120
#define AVR_HAVE_8BIT_SP (avr_current_device->short_sp || TARGET_TINY_STACK)
121
 
122
#define AVR_2_BYTE_PC (!AVR_HAVE_EIJMP_EICALL)
123
#define AVR_3_BYTE_PC (AVR_HAVE_EIJMP_EICALL)
124
 
125
#define TARGET_VERSION fprintf (stderr, " (GNU assembler syntax)");
126
 
127
#define OVERRIDE_OPTIONS avr_override_options ()
128
 
129
#define CAN_DEBUG_WITHOUT_FP
130
 
131
#define BITS_BIG_ENDIAN 0
132
#define BYTES_BIG_ENDIAN 0
133
#define WORDS_BIG_ENDIAN 0
134
 
135
#ifdef IN_LIBGCC2
136
/* This is to get correct SI and DI modes in libgcc2.c (32 and 64 bits).  */
137
#define UNITS_PER_WORD 4
138
#else
139
/* Width of a word, in units (bytes).  */
140
#define UNITS_PER_WORD 1
141
#endif
142
 
143
#define POINTER_SIZE 16
144
 
145
 
146
/* Maximum sized of reasonable data type
147
   DImode or Dfmode ...  */
148
#define MAX_FIXED_MODE_SIZE 32
149
 
150
#define PARM_BOUNDARY 8
151
 
152
#define FUNCTION_BOUNDARY 8
153
 
154
#define EMPTY_FIELD_BOUNDARY 8
155
 
156
/* No data type wants to be aligned rounder than this.  */
157
#define BIGGEST_ALIGNMENT 8
158
 
159
#define MAX_OFILE_ALIGNMENT (32768 * 8)
160
 
161
#define TARGET_VTABLE_ENTRY_ALIGN 8
162
 
163
#define STRICT_ALIGNMENT 0
164
 
165
#define INT_TYPE_SIZE (TARGET_INT8 ? 8 : 16)
166
#define SHORT_TYPE_SIZE (INT_TYPE_SIZE == 8 ? INT_TYPE_SIZE : 16)
167
#define LONG_TYPE_SIZE (INT_TYPE_SIZE == 8 ? 16 : 32)
168
#define LONG_LONG_TYPE_SIZE (INT_TYPE_SIZE == 8 ? 32 : 64)
169
#define FLOAT_TYPE_SIZE 32
170
#define DOUBLE_TYPE_SIZE 32
171
#define LONG_DOUBLE_TYPE_SIZE 32
172
 
173
#define DEFAULT_SIGNED_CHAR 1
174
 
175
#define SIZE_TYPE (INT_TYPE_SIZE == 8 ? "long unsigned int" : "unsigned int")
176
#define PTRDIFF_TYPE (INT_TYPE_SIZE == 8 ? "long int" :"int")
177
 
178
#define WCHAR_TYPE_SIZE 16
179
 
180
#define FIRST_PSEUDO_REGISTER 36
181
 
182
#define FIXED_REGISTERS {\
183
  1,1,/* r0 r1 */\
184
  0,0,/* r2 r3 */\
185
  0,0,/* r4 r5 */\
186
  0,0,/* r6 r7 */\
187
  0,0,/* r8 r9 */\
188
  0,0,/* r10 r11 */\
189
  0,0,/* r12 r13 */\
190
  0,0,/* r14 r15 */\
191
  0,0,/* r16 r17 */\
192
  0,0,/* r18 r19 */\
193
  0,0,/* r20 r21 */\
194
  0,0,/* r22 r23 */\
195
  0,0,/* r24 r25 */\
196
  0,0,/* r26 r27 */\
197
  0,0,/* r28 r29 */\
198
  0,0,/* r30 r31 */\
199
  1,1,/*  STACK */\
200
  1,1 /* arg pointer */  }
201
 
202
#define CALL_USED_REGISTERS {                   \
203
  1,1,/* r0 r1 */                               \
204
    0,0,/* r2 r3 */                               \
205
    0,0,/* r4 r5 */                               \
206
    0,0,/* r6 r7 */                               \
207
    0,0,/* r8 r9 */                               \
208
    0,0,/* r10 r11 */                             \
209
    0,0,/* r12 r13 */                             \
210
    0,0,/* r14 r15 */                             \
211
    0,0,/* r16 r17 */                             \
212
    1,1,/* r18 r19 */                           \
213
    1,1,/* r20 r21 */                           \
214
    1,1,/* r22 r23 */                           \
215
    1,1,/* r24 r25 */                           \
216
    1,1,/* r26 r27 */                           \
217
    0,0,/* r28 r29 */                             \
218
    1,1,/* r30 r31 */                           \
219
    1,1,/*  STACK */                            \
220
    1,1 /* arg pointer */  }
221
 
222
#define REG_ALLOC_ORDER {                       \
223
    24,25,                                      \
224
    18,19,                                      \
225
    20,21,                                      \
226
    22,23,                                      \
227
    30,31,                                      \
228
    26,27,                                      \
229
    28,29,                                      \
230
    17,16,15,14,13,12,11,10,9,8,7,6,5,4,3,2,    \
231
    0,1,                                 \
232
    32,33,34,35                                 \
233
    }
234
 
235
#define ORDER_REGS_FOR_LOCAL_ALLOC order_regs_for_local_alloc ()
236
 
237
 
238
#define HARD_REGNO_NREGS(REGNO, MODE) ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
239
 
240
#define HARD_REGNO_MODE_OK(REGNO, MODE) avr_hard_regno_mode_ok(REGNO, MODE)
241
 
242
#define MODES_TIEABLE_P(MODE1, MODE2) 1
243
 
244
enum reg_class {
245
  NO_REGS,
246
  R0_REG,                       /* r0 */
247
  POINTER_X_REGS,               /* r26 - r27 */
248
  POINTER_Y_REGS,               /* r28 - r29 */
249
  POINTER_Z_REGS,               /* r30 - r31 */
250
  STACK_REG,                    /* STACK */
251
  BASE_POINTER_REGS,            /* r28 - r31 */
252
  POINTER_REGS,                 /* r26 - r31 */
253
  ADDW_REGS,                    /* r24 - r31 */
254
  SIMPLE_LD_REGS,               /* r16 - r23 */
255
  LD_REGS,                      /* r16 - r31 */
256
  NO_LD_REGS,                   /* r0 - r15 */
257
  GENERAL_REGS,                 /* r0 - r31 */
258
  ALL_REGS, LIM_REG_CLASSES
259
};
260
 
261
 
262
#define N_REG_CLASSES (int)LIM_REG_CLASSES
263
 
264
#define REG_CLASS_NAMES {                                       \
265
                 "NO_REGS",                                     \
266
                   "R0_REG",    /* r0 */                        \
267
                   "POINTER_X_REGS", /* r26 - r27 */            \
268
                   "POINTER_Y_REGS", /* r28 - r29 */            \
269
                   "POINTER_Z_REGS", /* r30 - r31 */            \
270
                   "STACK_REG", /* STACK */                     \
271
                   "BASE_POINTER_REGS", /* r28 - r31 */         \
272
                   "POINTER_REGS", /* r26 - r31 */              \
273
                   "ADDW_REGS", /* r24 - r31 */                 \
274
                   "SIMPLE_LD_REGS", /* r16 - r23 */            \
275
                   "LD_REGS",   /* r16 - r31 */                 \
276
                   "NO_LD_REGS", /* r0 - r15 */                 \
277
                   "GENERAL_REGS", /* r0 - r31 */               \
278
                   "ALL_REGS" }
279
 
280
#define REG_CLASS_CONTENTS {                                            \
281
  {0x00000000,0x00000000},      /* NO_REGS */                           \
282
  {0x00000001,0x00000000},      /* R0_REG */                            \
283
  {3 << REG_X,0x00000000},      /* POINTER_X_REGS, r26 - r27 */         \
284
  {3 << REG_Y,0x00000000},      /* POINTER_Y_REGS, r28 - r29 */         \
285
  {3 << REG_Z,0x00000000},      /* POINTER_Z_REGS, r30 - r31 */         \
286
  {0x00000000,0x00000003},      /* STACK_REG, STACK */                  \
287
  {(3 << REG_Y) | (3 << REG_Z),                                         \
288
     0x00000000},               /* BASE_POINTER_REGS, r28 - r31 */      \
289
  {(3 << REG_X) | (3 << REG_Y) | (3 << REG_Z),                          \
290
     0x00000000},               /* POINTER_REGS, r26 - r31 */           \
291
  {(3 << REG_X) | (3 << REG_Y) | (3 << REG_Z) | (3 << REG_W),           \
292
     0x00000000},               /* ADDW_REGS, r24 - r31 */              \
293
  {0x00ff0000,0x00000000},      /* SIMPLE_LD_REGS r16 - r23 */          \
294
  {(3 << REG_X)|(3 << REG_Y)|(3 << REG_Z)|(3 << REG_W)|(0xff << 16),    \
295
     0x00000000},       /* LD_REGS, r16 - r31 */                        \
296
  {0x0000ffff,0x00000000},      /* NO_LD_REGS  r0 - r15 */              \
297
  {0xffffffff,0x00000000},      /* GENERAL_REGS, r0 - r31 */            \
298
  {0xffffffff,0x00000003}       /* ALL_REGS */                          \
299
}
300
 
301
#define REGNO_REG_CLASS(R) avr_regno_reg_class(R)
302
 
303
/* The following macro defines cover classes for Integrated Register
304
   Allocator.  Cover classes is a set of non-intersected register
305
   classes covering all hard registers used for register allocation
306
   purpose.  Any move between two registers of a cover class should be
307
   cheaper than load or store of the registers.  The macro value is
308
   array of register classes with LIM_REG_CLASSES used as the end
309
   marker.  */
310
 
311
#define IRA_COVER_CLASSES               \
312
{                                       \
313
  GENERAL_REGS, LIM_REG_CLASSES         \
314
}
315
 
316
#define BASE_REG_CLASS (reload_completed ? BASE_POINTER_REGS : POINTER_REGS)
317
 
318
#define INDEX_REG_CLASS NO_REGS
319
 
320
#define REGNO_OK_FOR_BASE_P(r) (((r) < FIRST_PSEUDO_REGISTER            \
321
                                 && ((r) == REG_X                       \
322
                                     || (r) == REG_Y                    \
323
                                     || (r) == REG_Z                    \
324
                                     || (r) == ARG_POINTER_REGNUM))     \
325
                                || (reg_renumber                        \
326
                                    && (reg_renumber[r] == REG_X        \
327
                                        || reg_renumber[r] == REG_Y     \
328
                                        || reg_renumber[r] == REG_Z     \
329
                                        || (reg_renumber[r]             \
330
                                            == ARG_POINTER_REGNUM))))
331
 
332
#define REGNO_OK_FOR_INDEX_P(NUM) 0
333
 
334
#define PREFERRED_RELOAD_CLASS(X, CLASS) preferred_reload_class(X,CLASS)
335
 
336
#define SMALL_REGISTER_CLASSES 1
337
 
338
#define CLASS_LIKELY_SPILLED_P(c) class_likely_spilled_p(c)
339
 
340
#define CLASS_MAX_NREGS(CLASS, MODE)   class_max_nregs (CLASS, MODE)
341
 
342
#define STACK_PUSH_CODE POST_DEC
343
 
344
#define STACK_GROWS_DOWNWARD
345
 
346
#define STARTING_FRAME_OFFSET 1
347
 
348
#define STACK_POINTER_OFFSET 1
349
 
350
#define FIRST_PARM_OFFSET(FUNDECL) 0
351
 
352
#define STACK_BOUNDARY 8
353
 
354
#define STACK_POINTER_REGNUM 32
355
 
356
#define FRAME_POINTER_REGNUM REG_Y
357
 
358
#define ARG_POINTER_REGNUM 34
359
 
360
#define STATIC_CHAIN_REGNUM 2
361
 
362
/* Offset from the frame pointer register value to the top of the stack.  */
363
#define FRAME_POINTER_CFA_OFFSET(FNDECL) 0
364
 
365
#define ELIMINABLE_REGS {                                       \
366
      {ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM},               \
367
        {FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}            \
368
       ,{FRAME_POINTER_REGNUM+1,STACK_POINTER_REGNUM+1}}
369
 
370
#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET)                    \
371
  OFFSET = avr_initial_elimination_offset (FROM, TO)
372
 
373
#define RETURN_ADDR_RTX(count, tem) avr_return_addr_rtx (count, tem)
374
 
375
/* Don't use Push rounding. expr.c: emit_single_push_insn is broken
376
   for POST_DEC targets (PR27386).  */
377
/*#define PUSH_ROUNDING(NPUSHED) (NPUSHED)*/
378
 
379
#define RETURN_POPS_ARGS(FUNDECL, FUNTYPE, STACK_SIZE) 0
380
 
381
#define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) (function_arg (&(CUM), MODE, TYPE, NAMED))
382
 
383
typedef struct avr_args {
384
  int nregs;                    /* # registers available for passing */
385
  int regno;                    /* next available register number */
386
} CUMULATIVE_ARGS;
387
 
388
#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, FNDECL, N_NAMED_ARGS) \
389
  init_cumulative_args (&(CUM), FNTYPE, LIBNAME, FNDECL)
390
 
391
#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED)    \
392
  (function_arg_advance (&CUM, MODE, TYPE, NAMED))
393
 
394
#define FUNCTION_ARG_REGNO_P(r) function_arg_regno_p(r)
395
 
396
extern int avr_reg_order[];
397
 
398
#define RET_REGISTER avr_ret_register ()
399
 
400
#define LIBCALL_VALUE(MODE)  avr_libcall_value (MODE)
401
 
402
#define FUNCTION_VALUE_REGNO_P(N) ((int) (N) == RET_REGISTER)
403
 
404
#define DEFAULT_PCC_STRUCT_RETURN 0
405
 
406
#define EPILOGUE_USES(REGNO) avr_epilogue_uses(REGNO)
407
 
408
#define HAVE_POST_INCREMENT 1
409
#define HAVE_PRE_DECREMENT 1
410
 
411
#define MAX_REGS_PER_ADDRESS 1
412
 
413
#define REG_OK_FOR_BASE_NOSTRICT_P(X) \
414
  (REGNO (X) >= FIRST_PSEUDO_REGISTER || REG_OK_FOR_BASE_STRICT_P(X))
415
 
416
#define REG_OK_FOR_BASE_STRICT_P(X) REGNO_OK_FOR_BASE_P (REGNO (X))
417
 
418
/* LEGITIMIZE_RELOAD_ADDRESS will allow register R26/27 to be used, where it
419
   is no worse than normal base pointers R28/29 and R30/31. For example:
420
   If base offset is greater than 63 bytes or for R++ or --R addressing.  */
421
 
422
#define LEGITIMIZE_RELOAD_ADDRESS(X, MODE, OPNUM, TYPE, IND_LEVELS, WIN)    \
423
do {                                                                        \
424
  if (1&&(GET_CODE (X) == POST_INC || GET_CODE (X) == PRE_DEC))     \
425
    {                                                                       \
426
      push_reload (XEXP (X,0), XEXP (X,0), &XEXP (X,0), &XEXP (X,0),            \
427
                   POINTER_REGS, GET_MODE (X),GET_MODE (X) , 0, 0,            \
428
                   OPNUM, RELOAD_OTHER);                                    \
429
      goto WIN;                                                             \
430
    }                                                                       \
431
  if (GET_CODE (X) == PLUS                                                  \
432
      && REG_P (XEXP (X, 0))                                                 \
433
      && reg_equiv_constant[REGNO (XEXP (X, 0))] == 0                         \
434
      && GET_CODE (XEXP (X, 1)) == CONST_INT                                \
435
      && INTVAL (XEXP (X, 1)) >= 1)                                         \
436
    {                                                                       \
437
      int fit = INTVAL (XEXP (X, 1)) <= (64 - GET_MODE_SIZE (MODE));        \
438
      if (fit)                                                              \
439
        {                                                                   \
440
          if (reg_equiv_address[REGNO (XEXP (X, 0))] != 0)                    \
441
            {                                                               \
442
              int regno = REGNO (XEXP (X, 0));                               \
443
              rtx mem = make_memloc (X, regno);                             \
444
              push_reload (XEXP (mem,0), NULL, &XEXP (mem,0), NULL,         \
445
                           POINTER_REGS, Pmode, VOIDmode, 0, 0,               \
446
                           1, ADDR_TYPE (TYPE));                            \
447
              push_reload (mem, NULL_RTX, &XEXP (X, 0), NULL,                \
448
                           BASE_POINTER_REGS, GET_MODE (X), VOIDmode, 0, 0, \
449
                           OPNUM, TYPE);                                    \
450
              goto WIN;                                                     \
451
            }                                                               \
452
        }                                                                   \
453
      else if (! (frame_pointer_needed && XEXP (X,0) == frame_pointer_rtx)) \
454
        {                                                                   \
455
          push_reload (X, NULL_RTX, &X, NULL,                               \
456
                       POINTER_REGS, GET_MODE (X), VOIDmode, 0, 0,            \
457
                       OPNUM, TYPE);                                        \
458
          goto WIN;                                                         \
459
        }                                                                   \
460
    }                                                                       \
461
} while(0)
462
 
463
#define LEGITIMATE_CONSTANT_P(X) 1
464
 
465
#define REGISTER_MOVE_COST(MODE, FROM, TO) ((FROM) == STACK_REG ? 6 \
466
                                            : (TO) == STACK_REG ? 12 \
467
                                            : 2)
468
 
469
#define MEMORY_MOVE_COST(MODE,CLASS,IN) ((MODE)==QImode ? 2 :   \
470
                                         (MODE)==HImode ? 4 :   \
471
                                         (MODE)==SImode ? 8 :   \
472
                                         (MODE)==SFmode ? 8 : 16)
473
 
474
#define BRANCH_COST(speed_p, predictable_p) 0
475
 
476
#define SLOW_BYTE_ACCESS 0
477
 
478
#define NO_FUNCTION_CSE
479
 
480
#define TEXT_SECTION_ASM_OP "\t.text"
481
 
482
#define DATA_SECTION_ASM_OP "\t.data"
483
 
484
#define BSS_SECTION_ASM_OP "\t.section .bss"
485
 
486
/* Define the pseudo-ops used to switch to the .ctors and .dtors sections.
487
   There are no shared libraries on this target, and these sections are
488
   placed in the read-only program memory, so they are not writable.  */
489
 
490
#undef CTORS_SECTION_ASM_OP
491
#define CTORS_SECTION_ASM_OP "\t.section .ctors,\"a\",@progbits"
492
 
493
#undef DTORS_SECTION_ASM_OP
494
#define DTORS_SECTION_ASM_OP "\t.section .dtors,\"a\",@progbits"
495
 
496
#define TARGET_ASM_CONSTRUCTOR avr_asm_out_ctor
497
 
498
#define TARGET_ASM_DESTRUCTOR avr_asm_out_dtor
499
 
500
#define SUPPORTS_INIT_PRIORITY 0
501
 
502
#define JUMP_TABLES_IN_TEXT_SECTION 0
503
 
504
#define ASM_COMMENT_START " ; "
505
 
506
#define ASM_APP_ON "/* #APP */\n"
507
 
508
#define ASM_APP_OFF "/* #NOAPP */\n"
509
 
510
/* Switch into a generic section.  */
511
#define TARGET_ASM_NAMED_SECTION default_elf_asm_named_section
512
#define TARGET_ASM_INIT_SECTIONS avr_asm_init_sections
513
 
514
#define ASM_OUTPUT_ASCII(FILE, P, SIZE)  gas_output_ascii (FILE,P,SIZE)
515
 
516
#define IS_ASM_LOGICAL_LINE_SEPARATOR(C, STR) ((C) == '\n' || ((C) == '$'))
517
 
518
#define ASM_OUTPUT_COMMON(STREAM, NAME, SIZE, ROUNDED)                     \
519
do {                                                                       \
520
     fputs ("\t.comm ", (STREAM));                                         \
521
     assemble_name ((STREAM), (NAME));                                     \
522
     fprintf ((STREAM), ",%lu,1\n", (unsigned long)(SIZE));                \
523
} while (0)
524
 
525
#define ASM_OUTPUT_BSS(FILE, DECL, NAME, SIZE, ROUNDED)                 \
526
  asm_output_bss ((FILE), (DECL), (NAME), (SIZE), (ROUNDED))
527
 
528
#define ASM_OUTPUT_LOCAL(STREAM, NAME, SIZE, ROUNDED)                   \
529
do {                                                                    \
530
     fputs ("\t.lcomm ", (STREAM));                                     \
531
     assemble_name ((STREAM), (NAME));                                  \
532
     fprintf ((STREAM), ",%d\n", (int)(SIZE));                          \
533
} while (0)
534
 
535
#undef TYPE_ASM_OP
536
#undef SIZE_ASM_OP
537
#undef WEAK_ASM_OP
538
#define TYPE_ASM_OP     "\t.type\t"
539
#define SIZE_ASM_OP     "\t.size\t"
540
#define WEAK_ASM_OP     "\t.weak\t"
541
/* Define the strings used for the special svr4 .type and .size directives.
542
   These strings generally do not vary from one system running svr4 to
543
   another, but if a given system (e.g. m88k running svr) needs to use
544
   different pseudo-op names for these, they may be overridden in the
545
   file which includes this one.  */
546
 
547
 
548
#undef TYPE_OPERAND_FMT
549
#define TYPE_OPERAND_FMT        "@%s"
550
/* The following macro defines the format used to output the second
551
   operand of the .type assembler directive.  Different svr4 assemblers
552
   expect various different forms for this operand.  The one given here
553
   is just a default.  You may need to override it in your machine-
554
   specific tm.h file (depending upon the particulars of your assembler).  */
555
 
556
#define ASM_DECLARE_FUNCTION_NAME(FILE, NAME, DECL)             \
557
avr_asm_declare_function_name ((FILE), (NAME), (DECL))
558
 
559
#define ASM_DECLARE_FUNCTION_SIZE(FILE, FNAME, DECL)                    \
560
  do {                                                                  \
561
    if (!flag_inhibit_size_directive)                                   \
562
      ASM_OUTPUT_MEASURED_SIZE (FILE, FNAME);                           \
563
  } while (0)
564
 
565
#define ASM_DECLARE_OBJECT_NAME(FILE, NAME, DECL)                       \
566
do {                                                                    \
567
  ASM_OUTPUT_TYPE_DIRECTIVE (FILE, NAME, "object");                     \
568
  size_directive_output = 0;                                             \
569
  if (!flag_inhibit_size_directive && DECL_SIZE (DECL))                 \
570
    {                                                                   \
571
      size_directive_output = 1;                                        \
572
      ASM_OUTPUT_SIZE_DIRECTIVE (FILE, NAME,                            \
573
                                 int_size_in_bytes (TREE_TYPE (DECL))); \
574
    }                                                                   \
575
  ASM_OUTPUT_LABEL(FILE, NAME);                                         \
576
} while (0)
577
 
578
#undef ASM_FINISH_DECLARE_OBJECT
579
#define ASM_FINISH_DECLARE_OBJECT(FILE, DECL, TOP_LEVEL, AT_END)         \
580
do {                                                                     \
581
     const char *name = XSTR (XEXP (DECL_RTL (DECL), 0), 0);               \
582
     HOST_WIDE_INT size;                                                 \
583
     if (!flag_inhibit_size_directive && DECL_SIZE (DECL)                \
584
         && ! AT_END && TOP_LEVEL                                        \
585
         && DECL_INITIAL (DECL) == error_mark_node                       \
586
         && !size_directive_output)                                      \
587
       {                                                                 \
588
         size_directive_output = 1;                                      \
589
         size = int_size_in_bytes (TREE_TYPE (DECL));                    \
590
         ASM_OUTPUT_SIZE_DIRECTIVE (FILE, name, size);                   \
591
       }                                                                 \
592
   } while (0)
593
 
594
 
595
#define ESCAPES \
596
"\1\1\1\1\1\1\1\1btn\1fr\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
597
\0\0\"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
598
\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\\0\0\0\
599
\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\
600
\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
601
\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
602
\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
603
\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1"
604
/* A table of bytes codes used by the ASM_OUTPUT_ASCII and
605
   ASM_OUTPUT_LIMITED_STRING macros.  Each byte in the table
606
   corresponds to a particular byte value [0..255].  For any
607
   given byte value, if the value in the corresponding table
608
   position is zero, the given character can be output directly.
609
   If the table value is 1, the byte must be output as a \ooo
610
   octal escape.  If the tables value is anything else, then the
611
   byte value should be output as a \ followed by the value
612
   in the table.  Note that we can use standard UN*X escape
613
   sequences for many control characters, but we don't use
614
   \a to represent BEL because some svr4 assemblers (e.g. on
615
   the i386) don't know about that.  Also, we don't use \v
616
   since some versions of gas, such as 2.2 did not accept it.  */
617
 
618
#define STRING_LIMIT    ((unsigned) 64)
619
#define STRING_ASM_OP   "\t.string\t"
620
/* Some svr4 assemblers have a limit on the number of characters which
621
   can appear in the operand of a .string directive.  If your assembler
622
   has such a limitation, you should define STRING_LIMIT to reflect that
623
   limit.  Note that at least some svr4 assemblers have a limit on the
624
   actual number of bytes in the double-quoted string, and that they
625
   count each character in an escape sequence as one byte.  Thus, an
626
   escape sequence like \377 would count as four bytes.
627
 
628
   If your target assembler doesn't support the .string directive, you
629
   should define this to zero.  */
630
 
631
/* Globalizing directive for a label.  */
632
#define GLOBAL_ASM_OP ".global\t"
633
 
634
#define SET_ASM_OP      "\t.set\t"
635
 
636
#define ASM_WEAKEN_LABEL(FILE, NAME)    \
637
  do                                    \
638
    {                                   \
639
      fputs ("\t.weak\t", (FILE));      \
640
      assemble_name ((FILE), (NAME));   \
641
      fputc ('\n', (FILE));             \
642
    }                                   \
643
  while (0)
644
 
645
#define SUPPORTS_WEAK 1
646
 
647
#define ASM_GENERATE_INTERNAL_LABEL(STRING, PREFIX, NUM)        \
648
sprintf (STRING, "*.%s%lu", PREFIX, (unsigned long)(NUM))
649
 
650
#define HAS_INIT_SECTION 1
651
 
652
#define REGISTER_NAMES {                                \
653
  "r0","r1","r2","r3","r4","r5","r6","r7",              \
654
    "r8","r9","r10","r11","r12","r13","r14","r15",      \
655
    "r16","r17","r18","r19","r20","r21","r22","r23",    \
656
    "r24","r25","r26","r27","r28","r29","r30","r31",    \
657
    "__SP_L__","__SP_H__","argL","argH"}
658
 
659
#define FINAL_PRESCAN_INSN(insn, operand, nop) final_prescan_insn (insn, operand,nop)
660
 
661
#define PRINT_OPERAND(STREAM, X, CODE) print_operand (STREAM, X, CODE)
662
 
663
#define PRINT_OPERAND_PUNCT_VALID_P(CODE) ((CODE) == '~' || (CODE) == '!')
664
 
665
#define PRINT_OPERAND_ADDRESS(STREAM, X) print_operand_address(STREAM, X)
666
 
667
#define USER_LABEL_PREFIX ""
668
 
669
#define ASSEMBLER_DIALECT AVR_HAVE_MOVW
670
 
671
#define ASM_OUTPUT_REG_PUSH(STREAM, REGNO)      \
672
{                                               \
673
  gcc_assert (REGNO < 32);                      \
674
  fprintf (STREAM, "\tpush\tr%d", REGNO);       \
675
}
676
 
677
#define ASM_OUTPUT_REG_POP(STREAM, REGNO)       \
678
{                                               \
679
  gcc_assert (REGNO < 32);                      \
680
  fprintf (STREAM, "\tpop\tr%d", REGNO);        \
681
}
682
 
683
#define ASM_OUTPUT_ADDR_VEC_ELT(STREAM, VALUE)          \
684
  avr_output_addr_vec_elt(STREAM, VALUE)
685
 
686
#define ASM_OUTPUT_CASE_LABEL(STREAM, PREFIX, NUM, TABLE) \
687
  (switch_to_section (progmem_section), \
688
   (*targetm.asm_out.internal_label) (STREAM, PREFIX, NUM))
689
 
690
#define ASM_OUTPUT_SKIP(STREAM, N)              \
691
fprintf (STREAM, "\t.skip %lu,0\n", (unsigned long)(N))
692
 
693
#define ASM_OUTPUT_ALIGN(STREAM, POWER)                 \
694
  do {                                                  \
695
      if ((POWER) > 1)                                  \
696
          fprintf (STREAM, "\t.p2align\t%d\n", POWER);  \
697
  } while (0)
698
 
699
#define ASM_OUTPUT_EXTERNAL(FILE, DECL, NAME) \
700
  default_elf_asm_output_external (FILE, DECL, NAME)
701
 
702
#define CASE_VECTOR_MODE HImode
703
 
704
#undef WORD_REGISTER_OPERATIONS
705
 
706
#define MOVE_MAX 4
707
 
708
#define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
709
 
710
#define Pmode HImode
711
 
712
#define FUNCTION_MODE HImode
713
 
714
#define DOLLARS_IN_IDENTIFIERS 0
715
 
716
#define NO_DOLLAR_IN_LABEL 1
717
 
718
#define TRAMPOLINE_SIZE 4
719
 
720
/* Store in cc_status the expressions
721
   that the condition codes will describe
722
   after execution of an instruction whose pattern is EXP.
723
   Do not alter them if the instruction would not alter the cc's.  */
724
 
725
#define NOTICE_UPDATE_CC(EXP, INSN) notice_update_cc(EXP, INSN)
726
 
727
/* The add insns don't set overflow in a usable way.  */
728
#define CC_OVERFLOW_UNUSABLE 01000
729
/* The mov,and,or,xor insns don't set carry.  That's ok though as the
730
   Z bit is all we need when doing unsigned comparisons on the result of
731
   these insns (since they're always with 0).  However, conditions.h has
732
   CC_NO_OVERFLOW defined for this purpose.  Rename it to something more
733
   understandable.  */
734
#define CC_NO_CARRY CC_NO_OVERFLOW
735
 
736
 
737
/* Output assembler code to FILE to increment profiler label # LABELNO
738
   for profiling a function entry.  */
739
 
740
#define FUNCTION_PROFILER(FILE, LABELNO)  \
741
  fprintf (FILE, "/* profiler %d */", (LABELNO))
742
 
743
#define ADJUST_INSN_LENGTH(INSN, LENGTH) (LENGTH =\
744
                                          adjust_insn_length (INSN, LENGTH))
745
 
746
extern const char *avr_device_to_arch (int argc, const char **argv);
747
extern const char *avr_device_to_data_start (int argc, const char **argv);
748
extern const char *avr_device_to_startfiles (int argc, const char **argv);
749
extern const char *avr_device_to_devicelib (int argc, const char **argv);
750
 
751
#define EXTRA_SPEC_FUNCTIONS \
752
  { "device_to_arch", avr_device_to_arch }, \
753
  { "device_to_data_start", avr_device_to_data_start }, \
754
  { "device_to_startfile", avr_device_to_startfiles }, \
755
  { "device_to_devicelib", avr_device_to_devicelib },
756
 
757
#define CPP_SPEC "%{posix:-D_POSIX_SOURCE}"
758
 
759
#define CC1_SPEC "%{profile:-p}"
760
 
761
#define CC1PLUS_SPEC "%{!frtti:-fno-rtti} \
762
    %{!fenforce-eh-specs:-fno-enforce-eh-specs} \
763
    %{!fexceptions:-fno-exceptions}"
764
/* A C string constant that tells the GCC driver program options to
765
   pass to `cc1plus'.  */
766
 
767
#define ASM_SPEC "%{mmcu=avr25:-mmcu=avr2;mmcu=avr35:-mmcu=avr3;mmcu=avr31:-mmcu=avr3;mmcu=avr51:-mmcu=avr5;\
768
mmcu=*:-mmcu=%*}"
769
 
770
#define LINK_SPEC "\
771
%{mrelax:--relax\
772
         %{mpmem-wrap-around:%{mmcu=at90usb8*:--pmem-wrap-around=8k}\
773
                             %{mmcu=atmega16*:--pmem-wrap-around=16k}\
774
                             %{mmcu=atmega32*|\
775
                               mmcu=at90can32*:--pmem-wrap-around=32k}\
776
                             %{mmcu=atmega64*|\
777
                               mmcu=at90can64*|\
778
                               mmcu=at90usb64*:--pmem-wrap-around=64k}}}\
779
%:device_to_arch(%{mmcu=*:%*})\
780
%:device_to_data_start(%{mmcu=*:%*})"
781
 
782
#define LIB_SPEC \
783
  "%{!mmcu=at90s1*:%{!mmcu=attiny11:%{!mmcu=attiny12:%{!mmcu=attiny15:%{!mmcu=attiny28: -lc }}}}}"
784
 
785
#define LIBSTDCXX "-lgcc"
786
/* No libstdc++ for now.  Empty string doesn't work.  */
787
 
788
#define LIBGCC_SPEC \
789
  "%{!mmcu=at90s1*:%{!mmcu=attiny11:%{!mmcu=attiny12:%{!mmcu=attiny15:%{!mmcu=attiny28: -lgcc }}}}}"
790
 
791
#define STARTFILE_SPEC "%:device_to_startfile(%{mmcu=*:%*})"
792
 
793
#define ENDFILE_SPEC ""
794
 
795
/* This is the default without any -mmcu=* option (AT90S*).  */
796
#define MULTILIB_DEFAULTS { "mmcu=avr2" }
797
 
798
#define TEST_HARD_REG_CLASS(CLASS, REGNO) \
799
  TEST_HARD_REG_BIT (reg_class_contents[ (int) (CLASS)], REGNO)
800
 
801
/* Note that the other files fail to use these
802
   in some of the places where they should.  */
803
 
804
#if defined(__STDC__) || defined(ALMOST_STDC)
805
#define AS2(a,b,c) #a " " #b "," #c
806
#define AS2C(b,c) " " #b "," #c
807
#define AS3(a,b,c,d) #a " " #b "," #c "," #d
808
#define AS1(a,b) #a " " #b
809
#else
810
#define AS1(a,b) "a     b"
811
#define AS2(a,b,c) "a   b,c"
812
#define AS2C(b,c) " b,c"
813
#define AS3(a,b,c,d) "a b,c,d"
814
#endif
815
#define OUT_AS1(a,b) output_asm_insn (AS1(a,b), operands)
816
#define OUT_AS2(a,b,c) output_asm_insn (AS2(a,b,c), operands)
817
#define CR_TAB "\n\t"
818
 
819
#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
820
 
821
#define DWARF2_DEBUGGING_INFO 1
822
 
823
#define DWARF2_ADDR_SIZE 4
824
 
825
#define OBJECT_FORMAT_ELF
826
 
827
#define HARD_REGNO_RENAME_OK(OLD_REG, NEW_REG) \
828
  avr_hard_regno_rename_ok (OLD_REG, NEW_REG)
829
 
830
/* A C structure for machine-specific, per-function data.
831
   This is added to the cfun structure.  */
832
struct GTY(()) machine_function
833
{
834
  /* 'true' - if current function is a naked function.  */
835
  int is_naked;
836
 
837
  /* 'true' - if current function is an interrupt function
838
     as specified by the "interrupt" attribute.  */
839
  int is_interrupt;
840
 
841
  /* 'true' - if current function is a signal function
842
     as specified by the "signal" attribute.  */
843
  int is_signal;
844
 
845
  /* 'true' - if current function is a 'task' function
846
     as specified by the "OS_task" attribute.  */
847
  int is_OS_task;
848
 
849
  /* 'true' - if current function is a 'main' function
850
     as specified by the "OS_main" attribute.  */
851
  int is_OS_main;
852
 
853
  /* Current function stack size.  */
854
  int stack_usage;
855
};

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.