Subversion Repositories openrisc_me

/* Copyright (C) 2000, 2001, 2003, 2004, 2005, 2006, 2009

   Free Software Foundation, Inc.

   This file was pretty much copied from newlib.

This file is part of GCC.

GCC is free software; you can redistribute it and/or modify it

under the terms of the GNU General Public License as published by the

Free Software Foundation; either version 3, or (at your option) any

later version.

GCC is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

General Public License for more details.

Under Section 7 of GPL version 3, you are granted additional

permissions described in the GCC Runtime Library Exception, version

3.1, as published by the Free Software Foundation.

You should have received a copy of the GNU General Public License and

a copy of the GCC Runtime Library Exception along with this program;

see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see

.  */

#ifdef MMU_SUPPORT

        /* Section used for exception/timer interrupt stack area */

        .section .data.vbr.stack,"aw"

        .align 4

        .global __ST_VBR

__ST_VBR:

        .zero 1024 * 2          /* ; 2k for VBR handlers */

/* Label at the highest stack address where the stack grows from */

__timer_stack:

#endif /* MMU_SUPPORT */

        /* ;----------------------------------------

        Normal newlib crt1.asm */

#ifdef __SH5__

        .section .data,"aw"

        .global ___data

___data:

        .section .rodata,"a"

        .global ___rodata

___rodata:

#define ICCR_BASE  0x01600000

#define OCCR_BASE  0x01e00000

#define MMUIR_BASE 0x00000000

#define MMUDR_BASE 0x00800000

#define PTE_ENABLED     1

#define PTE_DISABLED    0

#define PTE_SHARED (1 << 1)

#define PTE_NOT_SHARED  0

#define PTE_CB_UNCACHEABLE  0

#define PTE_CB_DEVICE       1

#define PTE_CB_CACHEABLE_WB 2

#define PTE_CB_CACHEABLE_WT 3

#define PTE_SZ_4KB   (0 << 3)

#define PTE_SZ_64KB  (1 << 3)

#define PTE_SZ_1MB   (2 << 3)

#define PTE_SZ_512MB (3 << 3)

#define PTE_PRR      (1 << 6)

#define PTE_PRX      (1 << 7)

#define PTE_PRW      (1 << 8)

#define PTE_PRU      (1 << 9)

#define SR_MMU_BIT          31

#define SR_BL_BIT           28

#define ALIGN_4KB  (0xfff)

#define ALIGN_1MB  (0xfffff)

#define ALIGN_512MB (0x1fffffff)

#define DYNACON_BASE               0x0f000000

#define DM_CB_DLINK_BASE           0x0c000000

#define DM_DB_DLINK_BASE           0x0b000000

#define FEMI_AREA_0                0x00000000

#define FEMI_AREA_1                0x04000000

#define FEMI_AREA_2                0x05000000

#define FEMI_AREA_3                0x06000000

#define FEMI_AREA_4                0x07000000

#define FEMI_CB                    0x08000000

#define EMI_BASE                   0X80000000

#define DMA_BASE                   0X0e000000

#define CPU_BASE                   0X0d000000

#define PERIPH_BASE                0X09000000

#define DMAC_BASE                  0x0e000000

#define INTC_BASE                  0x0a000000

#define CPRC_BASE                  0x0a010000

#define TMU_BASE                   0x0a020000

#define SCIF_BASE                  0x0a030000

#define RTC_BASE                   0x0a040000

#define LOAD_CONST32(val, reg) \

        movi    ((val) >> 16) & 65535, reg; \

        shori   (val) & 65535, reg

#define LOAD_PTEH_VAL(sym, align, bits, scratch_reg, reg) \

        LOAD_ADDR (sym, reg); \

        LOAD_CONST32 ((align), scratch_reg); \

        andc    reg, scratch_reg, reg; \

        LOAD_CONST32 ((bits), scratch_reg); \

        or      reg, scratch_reg, reg

#define LOAD_PTEL_VAL(sym, align, bits, scratch_reg, reg) \

        LOAD_ADDR (sym, reg); \

        LOAD_CONST32 ((align), scratch_reg); \

        andc    reg, scratch_reg, reg; \

        LOAD_CONST32 ((bits), scratch_reg); \

        or      reg, scratch_reg, reg

#define SET_PTE(pte_addr_reg, pteh_val_reg, ptel_val_reg) \

        putcfg  pte_addr_reg, 0, r63; \

        putcfg  pte_addr_reg, 1, ptel_val_reg; \

        putcfg  pte_addr_reg, 0, pteh_val_reg

#if __SH5__ == 64

        .section .text,"ax"

#define LOAD_ADDR(sym, reg) \

        movi    (sym >> 48) & 65535, reg; \

        shori   (sym >> 32) & 65535, reg; \

        shori   (sym >> 16) & 65535, reg; \

        shori   sym & 65535, reg

#else

        .mode   SHmedia

        .section .text..SHmedia32,"ax"

#define LOAD_ADDR(sym, reg) \

        movi    (sym >> 16) & 65535, reg; \

        shori   sym & 65535, reg

#endif

        .global start

start:

        LOAD_ADDR (_stack, r15)

#ifdef MMU_SUPPORT

        ! Set up the VM using the MMU and caches

        ! .vm_ep is first instruction to execute

        ! after VM initialization

        pt/l    .vm_ep, tr1

        ! Configure instruction cache (ICCR)

        movi    3, r2

        movi    0, r3

        LOAD_ADDR (ICCR_BASE, r1)

        putcfg  r1, 0, r2

        putcfg  r1, 1, r3

        ! movi  7, r2 ! write through

        ! Configure operand cache (OCCR)

        LOAD_ADDR (OCCR_BASE, r1)

        putcfg  r1, 0, r2

        putcfg  r1, 1, r3

        ! Disable all PTE translations

        LOAD_ADDR (MMUIR_BASE, r1)

        LOAD_ADDR (MMUDR_BASE, r2)

        movi    64, r3

        pt/l    .disable_ptes_loop, tr0

.disable_ptes_loop:

        putcfg  r1, 0, r63

        putcfg  r2, 0, r63

        addi    r1, 16, r1

        addi    r2, 16, r2

        addi    r3, -1, r3

        bgt     r3, r63, tr0

        LOAD_ADDR (MMUIR_BASE, r1)

        ! FEMI instruction mappings

        !   Area 0 - 1Mb cacheable at 0x00000000

        !   Area 1 - None

        !   Area 2 - 1Mb cacheable at 0x05000000

        !          - 1Mb cacheable at 0x05100000

        !   Area 3 - None

        !   Area 4 - None

        ! Map a 1Mb page for instructions at 0x00000000

        LOAD_PTEH_VAL (FEMI_AREA_0, ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (FEMI_AREA_0, ALIGN_1MB, PTE_CB_CACHEABLE_WB | PTE_SZ_1MB | PTE_PRX | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 1Mb page for instructions at 0x05000000

        addi    r1, 16, r1

        LOAD_PTEH_VAL (FEMI_AREA_2, ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (FEMI_AREA_2, ALIGN_1MB, PTE_CB_CACHEABLE_WB | PTE_SZ_1MB | PTE_PRX | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 1Mb page for instructions at 0x05100000

        addi    r1, 16, r1

        LOAD_PTEH_VAL ((FEMI_AREA_2+0x100000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL ((FEMI_AREA_2+0x100000), ALIGN_1MB, PTE_CB_CACHEABLE_WB | PTE_SZ_1MB | PTE_PRX | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 512M page for instructions at EMI base

        addi    r1, 16, r1

        LOAD_PTEH_VAL (EMI_BASE, ALIGN_512MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (EMI_BASE, ALIGN_512MB, PTE_CB_CACHEABLE_WB | PTE_SZ_512MB | PTE_PRX | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 4K page for instructions at DM_DB_DLINK_BASE

        addi    r1, 16, r1

        LOAD_PTEH_VAL (DM_DB_DLINK_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (DM_DB_DLINK_BASE, ALIGN_4KB, PTE_CB_CACHEABLE_WB | PTE_SZ_4KB | PTE_PRX | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        LOAD_ADDR (MMUDR_BASE, r1)

        ! FEMI data mappings

        !   Area 0 - 1Mb cacheable at 0x00000000

        !   Area 1 - 1Mb device at 0x04000000

        !   Area 2 - 1Mb cacheable at 0x05000000

        !          - 1Mb cacheable at 0x05100000

        !   Area 3 - None

        !   Area 4 - None

        !   CB     - 1Mb device at 0x08000000

        ! Map a 1Mb page for data at 0x00000000

        LOAD_PTEH_VAL (FEMI_AREA_0, ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (FEMI_AREA_0, ALIGN_1MB, PTE_CB_CACHEABLE_WB | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 1Mb page for data at 0x04000000

        addi    r1, 16, r1

        LOAD_PTEH_VAL (FEMI_AREA_1, ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (FEMI_AREA_1, ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 1Mb page for data at 0x05000000

        addi    r1, 16, r1

        LOAD_PTEH_VAL (FEMI_AREA_2, ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (FEMI_AREA_2, ALIGN_1MB, PTE_CB_CACHEABLE_WB | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 1Mb page for data at 0x05100000

        addi    r1, 16, r1

        LOAD_PTEH_VAL ((FEMI_AREA_2+0x100000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL ((FEMI_AREA_2+0x100000), ALIGN_1MB, PTE_CB_CACHEABLE_WB | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 4K page for registers at 0x08000000

        addi    r1, 16, r1

        LOAD_PTEH_VAL (FEMI_CB, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (FEMI_CB, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 512M page for data at EMI

        addi    r1, 16, r1

        LOAD_PTEH_VAL (EMI_BASE, ALIGN_512MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (EMI_BASE, ALIGN_512MB, PTE_CB_CACHEABLE_WB | PTE_SZ_512MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 4K page for DYNACON at DYNACON_BASE

        addi    r1, 16, r1

        LOAD_PTEH_VAL (DYNACON_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (DYNACON_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 4K page for instructions at DM_DB_DLINK_BASE

        addi    r1, 16, r1

        LOAD_PTEH_VAL (DM_DB_DLINK_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (DM_DB_DLINK_BASE, ALIGN_4KB, PTE_CB_CACHEABLE_WB | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 4K page for data at DM_DB_DLINK_BASE+0x1000

        addi    r1, 16, r1

        LOAD_PTEH_VAL ((DM_DB_DLINK_BASE+0x1000), ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL ((DM_DB_DLINK_BASE+0x1000), ALIGN_4KB, PTE_CB_UNCACHEABLE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 4K page for stack DM_DB_DLINK_BASE+0x2000

        addi    r1, 16, r1

        LOAD_PTEH_VAL ((DM_DB_DLINK_BASE+0x2000), ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL ((DM_DB_DLINK_BASE+0x2000), ALIGN_4KB, PTE_CB_CACHEABLE_WB | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 1M page for DM_CB_BASE2 at DM_CB_DLINK

        ! 0x0c000000 - 0x0c0fffff

        addi    r1, 16, r1

        LOAD_PTEH_VAL (DM_CB_DLINK_BASE, ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (DM_CB_DLINK_BASE, ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 1M page for DM_CB_BASE2 at DM_CB_DLINK

        ! 0x0c100000 - 0x0c1fffff

        addi    r1, 16, r1

        LOAD_PTEH_VAL ((DM_CB_DLINK_BASE+0x100000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL ((DM_CB_DLINK_BASE+0x100000), ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 1M page for DM_CB_BASE2 at DM_CB_DLINK

        ! 0x0c200000 - 0x0c2fffff

        addi    r1, 16, r1

        LOAD_PTEH_VAL ((DM_CB_DLINK_BASE+0x200000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL ((DM_CB_DLINK_BASE+0x200000), ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 1M page for DM_CB_BASE2 at DM_CB_DLINK

        ! 0x0c400000 - 0x0c4fffff

        addi    r1, 16, r1

        LOAD_PTEH_VAL ((DM_CB_DLINK_BASE+0x400000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL ((DM_CB_DLINK_BASE+0x400000), ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 1M page for DM_CB_BASE2 at DM_CB_DLINK

        ! 0x0c800000 - 0x0c8fffff

        addi    r1, 16, r1

        LOAD_PTEH_VAL ((DM_CB_DLINK_BASE+0x800000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL ((DM_CB_DLINK_BASE+0x800000), ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map a 4K page for DMA control registers

        addi    r1, 16, r1

        LOAD_PTEH_VAL (DMA_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (DMA_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map lots of 4K pages for peripherals

        ! /* peripheral */

        addi    r1, 16, r1

        LOAD_PTEH_VAL (PERIPH_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (PERIPH_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! /* dmac */

        addi    r1, 16, r1

        LOAD_PTEH_VAL (DMAC_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (DMAC_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! /* intc */

        addi    r1, 16, r1

        LOAD_PTEH_VAL (INTC_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (INTC_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! /* rtc */

        addi    r1, 16, r1

        LOAD_PTEH_VAL (RTC_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (RTC_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! /* dmac */

        addi    r1, 16, r1

        LOAD_PTEH_VAL (TMU_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (TMU_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! /* scif */

        addi    r1, 16, r1

        LOAD_PTEH_VAL (SCIF_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (SCIF_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! /* cprc */

        addi    r1, 16, r1

        LOAD_PTEH_VAL (CPRC_BASE, ALIGN_4KB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (CPRC_BASE, ALIGN_4KB, PTE_CB_DEVICE | PTE_SZ_4KB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Map CPU WPC registers

        addi    r1, 16, r1

        LOAD_PTEH_VAL (CPU_BASE, ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL (CPU_BASE, ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        addi    r1, 16, r1

        LOAD_PTEH_VAL ((CPU_BASE+0x100000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL ((CPU_BASE+0x100000), ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        addi    r1, 16, r1

        LOAD_PTEH_VAL ((CPU_BASE+0x200000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL ((CPU_BASE+0x200000), ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        addi    r1, 16, r1

        LOAD_PTEH_VAL ((CPU_BASE+0x400000), ALIGN_1MB, PTE_ENABLED | PTE_NOT_SHARED, r25, r2)

        LOAD_PTEL_VAL ((CPU_BASE+0x400000), ALIGN_1MB, PTE_CB_DEVICE | PTE_SZ_1MB | PTE_PRR | PTE_PRW | PTE_PRU, r25, r3)

        SET_PTE (r1, r2, r3)

        ! Switch over to virtual addressing and enabled cache

        getcon  sr, r1

        movi    1, r2

        shlli   r2, SR_BL_BIT, r2

        or      r1, r2, r1

        putcon  r1, ssr

        getcon  sr, r1

        movi    1, r2

        shlli   r2, SR_MMU_BIT, r2

        or      r1, r2, r1

        putcon  r1, ssr

        gettr   tr1, r1

        putcon  r1, spc

        synco

        rte

        ! VM entry point.  From now on, we are in VM mode.

.vm_ep:

        ! Install the trap handler, by seeding vbr with the

        ! correct value, and by assigning sr.bl = 0.

        LOAD_ADDR (vbr_start, r1)

        putcon  r1, vbr

        movi    ~(1<<28), r1

        getcon  sr, r2

        and     r1, r2, r2

        putcon  r2, sr

#endif /* MMU_SUPPORT */

        pt/l    .Lzero_bss_loop, tr0

        pt/l    _init, tr5

        pt/l    ___setup_argv_and_call_main, tr6

        pt/l    _exit, tr7

        ! zero out bss

        LOAD_ADDR (_edata, r0)

        LOAD_ADDR (_end, r1)

.Lzero_bss_loop:

        stx.q   r0, r63, r63

        addi    r0, 8, r0

        bgt/l   r1, r0, tr0

        LOAD_ADDR (___data, r26)

        LOAD_ADDR (___rodata, r27)

#ifdef __SH_FPU_ANY__

        getcon  sr, r0

        ! enable the FP unit, by resetting SR.FD

        ! also zero out SR.FR, SR.SZ and SR.PR, as mandated by the ABI

        movi    0, r1

        shori   0xf000, r1

        andc    r0, r1, r0

        putcon  r0, sr

#if __SH5__ == 32

        pt/l ___set_fpscr, tr0

        movi    0, r4

        blink   tr0, r18

#endif

#endif

        ! arrange for exit to call fini

        pt/l    _atexit, tr1

        LOAD_ADDR (_fini, r2)

        blink   tr1, r18

        ! call init

        blink   tr5, r18

        ! call the mainline

        blink   tr6, r18

        ! call exit

        blink   tr7, r18

        ! We should never return from _exit but in case we do we would enter the

        ! the following tight loop. This avoids executing any data that might follow.

limbo:

        pt/l limbo, tr0

        blink tr0, r63

#ifdef MMU_SUPPORT

        ! All these traps are handled in the same place.

        .balign 256

vbr_start:

        pt/l handler, tr0       ! tr0 trashed.

        blink tr0, r63

        .balign 256

vbr_100:

        pt/l handler, tr0       ! tr0 trashed.

        blink tr0, r63

vbr_100_end:

        .balign 256

vbr_200:

        pt/l handler, tr0       ! tr0 trashed.

        blink tr0, r63

        .balign 256

vbr_300:

        pt/l handler, tr0       ! tr0 trashed.

        blink tr0, r63

        .balign 256

vbr_400:        ! Should be at vbr+0x400

handler:

        /* If the trap handler is there call it */

        LOAD_ADDR (__superh_trap_handler, r2)

        pta chandler,tr2

        beq r2, r63, tr2 /* If zero, ie not present branch around to chandler */

        /* Now call the trap handler with as much of the context unchanged as possible.

           Move trapping address into R18 to make it look like the trap point */

        getcon spc, r18

        pt/l __superh_trap_handler, tr0

        blink tr0, r7

chandler:

        getcon  spc, r62

        getcon expevt, r2

        pt/l    _exit, tr0

        blink   tr0, r63

        /* Simulated trap handler */

        .section        .text..SHmedia32,"ax"

gcc2_compiled.:

        .section        .debug_abbrev

.Ldebug_abbrev0:

        .section        .text..SHmedia32

.Ltext0:

        .section        .debug_info

.Ldebug_info0:

        .section        .debug_line

.Ldebug_line0:

        .section        .text..SHmedia32,"ax"

        .align 5

        .global __superh_trap_handler

        .type   __superh_trap_handler,@function

__superh_trap_handler:

.LFB1:

        ptabs   r18, tr0

        addi.l  r15, -8, r15

        st.l    r15, 4, r14

        addi.l  r15, -8, r15

        add.l   r15, r63, r14

        st.l    r14, 0, r2

         ptabs r7, tr0

        addi.l  r14, 8, r14

        add.l   r14, r63, r15

        ld.l    r15, 4, r14

        addi.l  r15, 8, r15

        blink   tr0, r63

.LFE1:

.Lfe1:

        .size   __superh_trap_handler,.Lfe1-__superh_trap_handler

        .section        .text..SHmedia32

.Letext0:

        .section        .debug_info

        .ualong 0xa7

        .uaword 0x2

        .ualong .Ldebug_abbrev0

        .byte   0x4

        .byte   0x1

        .ualong .Ldebug_line0

        .ualong .Letext0

        .ualong .Ltext0

        .string "trap_handler.c"

        .string "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"

        .string "GNU C 2.97-sh5-010522"

        .byte   0x1

        .byte   0x2

        .ualong 0x9a

        .byte   0x1

        .string "_superh_trap_handler"

        .byte   0x1

        .byte   0x2

        .byte   0x1

        .ualong .LFB1

        .ualong .LFE1

        .byte   0x1

        .byte   0x5e

        .byte   0x3

        .string "trap_reason"

        .byte   0x1

        .byte   0x1

        .ualong 0x9a

        .byte   0x2

        .byte   0x91

        .byte   0x0

        .byte   0x0

        .byte   0x4

        .string "unsigned int"

        .byte   0x4

        .byte   0x7

        .byte   0x0

        .section        .debug_abbrev

        .byte   0x1

        .byte   0x11

        .byte   0x1

        .byte   0x10

        .byte   0x6

        .byte   0x12

        .byte   0x1

        .byte   0x11

        .byte   0x1

        .byte   0x3

        .byte   0x8

        .byte   0x1b

        .byte   0x8

        .byte   0x25

        .byte   0x8

        .byte   0x13

        .byte   0xb

        .byte   0,0

        .byte   0x2

        .byte   0x2e

        .byte   0x1

        .byte   0x1

        .byte   0x13

        .byte   0x3f

        .byte   0xc

        .byte   0x3

        .byte   0x8

        .byte   0x3a

        .byte   0xb

        .byte   0x3b

        .byte   0xb

        .byte   0x27

        .byte   0xc

        .byte   0x11

        .byte   0x1

        .byte   0x12

        .byte   0x1

        .byte   0x40

        .byte   0xa

        .byte   0,0

        .byte   0x3

        .byte   0x5

        .byte   0x0

        .byte   0x3

        .byte   0x8

        .byte   0x3a

        .byte   0xb

        .byte   0x3b

        .byte   0xb

        .byte   0x49

        .byte   0x13

        .byte   0x2

        .byte   0xa

        .byte   0,0

        .byte   0x4

        .byte   0x24

        .byte   0x0

        .byte   0x3

        .byte   0x8

        .byte   0xb

        .byte   0xb

        .byte   0x3e

        .byte   0xb

        .byte   0,0

        .byte   0

        .section        .debug_pubnames

        .ualong 0x27

        .uaword 0x2

        .ualong .Ldebug_info0

        .ualong 0xab

        .ualong 0x5b

        .string "_superh_trap_handler"

        .ualong 0x0

        .section        .debug_aranges

        .ualong 0x1c

        .uaword 0x2

        .ualong .Ldebug_info0

        .byte   0x4

        .byte   0x0

        .uaword 0x0,0

        .ualong .Ltext0

        .ualong .Letext0-.Ltext0

        .ualong 0x0

        .ualong 0x0

        .ident  "GCC: (GNU) 2.97-sh5-010522"

#endif /* MMU_SUPPORT */

#else /* ! __SH5__ */

        ! make a place to keep any previous value of the vbr register

        ! this will only have a value if it has been set by redboot (for example)

        .section .bss

old_vbr:

        .long 0

#ifdef PROFILE

profiling_enabled:

        .long 0

#endif

        .section .text

        .global start

        .import ___rtos_profiler_start_timer

        .weak   ___rtos_profiler_start_timer

start:

        mov.l   stack_k,r15

#if defined (__SH3__) || (defined (__SH_FPU_ANY__) && ! defined (__SH2A__)) || defined (__SH4_NOFPU__)

#define VBR_SETUP

        ! before zeroing the bss ...

        ! if the vbr is already set to vbr_start then the program has been restarted

        ! (i.e. it is not the first time the program has been run since reset)

        ! reset the vbr to its old value before old_vbr (in bss) is wiped

        ! this ensures that the later code does not create a circular vbr chain

        stc     vbr, r1

        mov.l   vbr_start_k, r2

        cmp/eq  r1, r2

        bf      0f

        ! reset the old vbr value

        mov.l   old_vbr_k, r1

        mov.l   @r1, r2

        ldc     r2, vbr

0:

#endif /* VBR_SETUP */

        ! zero out bss

        mov.l   edata_k,r0

        mov.l   end_k,r1

        mov     #0,r2

start_l:

        mov.l   r2,@r0

        add     #4,r0

        cmp/ge  r0,r1

        bt      start_l

#if defined (__SH_FPU_ANY__)

        mov.l set_fpscr_k, r1

        mov #4,r4

        jsr @r1

        shll16 r4       ! Set DN bit (flush denormal inputs to zero)

        lds r3,fpscr    ! Switch to default precision

#endif /* defined (__SH_FPU_ANY__) */

#ifdef VBR_SETUP

        ! save the existing contents of the vbr

        ! there will only be a prior value when using something like redboot

        ! otherwise it will be zero

        stc     vbr, r1

        mov.l   old_vbr_k, r2

        mov.l   r1, @r2

        ! setup vbr

        mov.l   vbr_start_k, r1

        ldc     r1,vbr

#endif /* VBR_SETUP */

        ! if an rtos is exporting a timer start fn,

        ! then pick up an SR which does not enable ints

        ! (the rtos will take care of this)

        mov.l rtos_start_fn, r0

        mov.l sr_initial_bare, r1

        tst     r0, r0

        bt      set_sr

        mov.l sr_initial_rtos, r1

set_sr:

        ! Set status register (sr)

        ldc     r1, sr

        ! arrange for exit to call fini

        mov.l   atexit_k,r0

        mov.l   fini_k,r4

        jsr     @r0

        nop

#ifdef PROFILE

        ! arrange for exit to call _mcleanup (via stop_profiling)

        mova    stop_profiling,r0

        mov.l   atexit_k,r1

        jsr     @r1

        mov     r0, r4

        ! Call profiler startup code

        mov.l monstartup_k, r0

        mov.l start_k, r4

        mov.l etext_k, r5

        jsr @r0

        nop

        ! enable profiling trap

        ! until now any trap 33s will have been ignored

        ! This means that all library functions called before this point

        ! (directly or indirectly) may have the profiling trap at the start.

        ! Therefore, only mcount itself may not have the extra header.

        mov.l   profiling_enabled_k2, r0

        mov     #1, r1

        mov.l   r1, @r0

#endif /* PROFILE */

        ! call init

        mov.l   init_k,r0

        jsr     @r0

        nop

        ! call the mainline

        mov.l   main_k,r0

        jsr     @r0

        nop

        ! call exit

        mov     r0,r4

        mov.l   exit_k,r0

        jsr     @r0

        nop

                .balign 4

#ifdef PROFILE

stop_profiling:

        # stop mcount counting

        mov.l   profiling_enabled_k2, r0

        mov     #0, r1

        mov.l   r1, @r0

        # call mcleanup

        mov.l   mcleanup_k, r0

        jmp     @r0

        nop

                .balign 4

mcleanup_k:

        .long __mcleanup

monstartup_k:

        .long ___monstartup

profiling_enabled_k2:

        .long profiling_enabled

start_k:

        .long _start

etext_k:

        .long __etext

#endif /* PROFILE */

        .align 2

#if defined (__SH_FPU_ANY__)

set_fpscr_k:

        .long   ___set_fpscr

#endif /*  defined (__SH_FPU_ANY__) */

stack_k:

        .long   _stack

edata_k:

        .long   _edata

end_k:

        .long   _end

main_k:

        .long   ___setup_argv_and_call_main

exit_k:

        .long   _exit

atexit_k:

        .long   _atexit

init_k:

        .long   _init

fini_k:

        .long   _fini

#ifdef VBR_SETUP

old_vbr_k:

        .long   old_vbr

vbr_start_k:

        .long   vbr_start

#endif /* VBR_SETUP */

sr_initial_rtos:

        ! Privileged mode RB 1 BL 0. Keep BL 0 to allow default trap handlers to work.

        ! Whether profiling or not, keep interrupts masked,

        ! the RTOS will enable these if required.

        .long 0x600000f1

rtos_start_fn:

        .long ___rtos_profiler_start_timer

#ifdef PROFILE

sr_initial_bare:

        ! Privileged mode RB 1 BL 0. Keep BL 0 to allow default trap handlers to work.

        ! For bare machine, we need to enable interrupts to get profiling working

        .long 0x60000001

#else

sr_initial_bare:

        ! Privileged mode RB 1 BL 0. Keep BL 0 to allow default trap handlers to work.

        ! Keep interrupts disabled - the application will enable as required.

        .long 0x600000f1

#endif

        ! supplied for backward compatibility only, in case of linking

        ! code whose main() was compiled with an older version of GCC.

        .global ___main

___main:

        rts

        nop

#ifdef VBR_SETUP

! Exception handlers

        .section .text.vbr, "ax"

vbr_start:

        .org 0x100

vbr_100:

#ifdef PROFILE

        ! Note on register usage.

        ! we use r0..r3 as scratch in this code. If we are here due to a trapa for profiling

        ! then this is OK as we are just before executing any function code.

        ! The other r4..r7 we save explicityl on the stack

        ! Remaining registers are saved by normal ABI conventions and we assert we do not

        ! use floating point registers.

        mov.l expevt_k1, r1

        mov.l @r1, r1

        mov.l event_mask, r0

        and r0,r1

        mov.l trapcode_k, r2

        cmp/eq r1,r2

        bt 1f

        bra handler_100   ! if not a trapa, go to default handler

        nop

1:

        mov.l trapa_k, r0

        mov.l @r0, r0

        shlr2 r0      ! trapa code is shifted by 2.

        cmp/eq #33, r0

        bt 2f

        bra handler_100

        nop

2:

        ! If here then it looks like we have trap #33

        ! Now we need to call mcount with the following convention

        ! Save and restore r4..r7

        mov.l   r4,@-r15

        mov.l   r5,@-r15

        mov.l   r6,@-r15

        mov.l   r7,@-r15

        sts.l   pr,@-r15

        ! r4 is frompc.

        ! r5 is selfpc

        ! r0 is the branch back address.

        ! The code sequence emitted by gcc for the profiling trap is

        ! .align 2