Subversion Repositories openrisc_me

-- C954013.A

--

--                             Grant of Unlimited Rights

--

--     Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687,

--     F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained

--     unlimited rights in the software and documentation contained herein.

--     Unlimited rights are defined in DFAR 252.227-7013(a)(19).  By making

--     this public release, the Government intends to confer upon all

--     recipients unlimited rights  equal to those held by the Government.

--     These rights include rights to use, duplicate, release or disclose the

--     released technical data and computer software in whole or in part, in

--     any manner and for any purpose whatsoever, and to have or permit others

--     to do so.

--

--                                    DISCLAIMER

--

--     ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR

--     DISCLOSED ARE AS IS.  THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED

--     WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE

--     SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE

--     OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A

--     PARTICULAR PURPOSE OF SAID MATERIAL.

--*

--

-- OBJECTIVE:

--      Check that a requeue is cancelled and that the requeuing task is

--      unaffected when the calling task is aborted.

--      Specifically, check requeue to an entry in a different task,

--      requeue where the entry has parameters, and requeue with abort.

--

-- TEST DESCRIPTION:

--      Abort a task that has a call requeued to the entry queue of another

--      task.  We do this by sending two messages to the Distributor which

--      requeues them to the Credit task.  In the accept body of the Credit

--      task we wait for the second message to arrive then check that an

--      abort of the second message task does result in the requeue being

--      removed.  The Line Driver task which generates the messages and the

--      Credit task communicate artificially in this test to arrange for the

--      proper timing of the messages and the abort.  One extra message is

--      sent to the Debit task to ensure that the Distributor is still viable

--      and has been unaffected by the abort.

--

--      This series of tests uses a simulation of a transaction driven

--      processing system.  Line Drivers accept input from an external source

--      and build them into transaction records.  These records are then

--      encapsulated in message tasks which remain extant for the life of the

--      transaction in the system.  The message tasks put themselves on the

--      input queue of a Distributor which, from information in the

--      transaction and/or system load conditions forwards them to other

--      operating tasks. These in turn might forward the transactions to yet

--      other tasks for further action.  The routing is, in real life, dynamic

--      and unpredictable at the time of message generation.  All rerouting in

--      this  model is done by means of requeues.

--

--

-- CHANGE HISTORY:

--      06 Dec 94   SAIC    ACVC 2.0

--      25 Nov 95   SAIC    Fixed shared global variable problems for

--                          ACVC 2.0.1

--

--!

with Report;

with ImpDef;

procedure C954013 is

   -- Arbitrary test values

   Credit_Return : constant := 1;

   Debit_Return  : constant := 2;

   protected type Shared_Boolean (Initial_Value : Boolean := False) is

      procedure Set_True;

      procedure Set_False;

      function  Value return Boolean;

   private

      Current_Value : Boolean := Initial_Value;

   end Shared_Boolean;

   protected body Shared_Boolean is

      procedure Set_True is

      begin

         Current_Value := True;

      end Set_True;

      procedure Set_False is

      begin

         Current_Value := False;

      end Set_False;

      function Value return Boolean is

      begin

         return Current_Value;

      end Value;

   end Shared_Boolean;

   TC_Debit_Message_Complete  : Shared_Boolean (False);

   TC_Credit_Message_Complete : Shared_Boolean (False);

   type Transaction_Code is (Credit, Debit);

   type Transaction_Record;

   type acc_Transaction_Record is access Transaction_Record;

   type Transaction_Record is

      record

         ID               : integer := 0;

         Code             : Transaction_Code := Debit;

         Account_Number   : integer := 0;

         Stock_Number     : integer := 0;

         Quantity         : integer := 0;

         Return_Value     : integer := 0;

         TC_Message_Count : integer := 0;

         TC_Thru_Dist     : Boolean := false;

      end record;

   task type Message_Task is

      entry Accept_Transaction (In_Transaction : acc_Transaction_Record);

   end Message_Task;

   type acc_Message_Task is access Message_Task;

   task Line_Driver is

      entry Start;

   end Line_Driver;

   task Distributor is

      entry Input(Transaction : acc_Transaction_Record);

   end Distributor;

   task Credit_Computation is

      entry Input(Transaction : acc_Transaction_Record);

   end Credit_Computation;

   task Debit_Computation is

      entry Input(Transaction : acc_Transaction_Record);

   end Debit_Computation;

   -- This protected object is here for Test Control purposes only

   protected TC_Prt is

      procedure Set_First_Has_Arrived;

      procedure Set_Second_Has_Arrived;

      procedure Set_Abort_Has_Completed;

      function  First_Has_Arrived   return Boolean;

      function  Second_Has_Arrived  return Boolean;

      function  Abort_Has_Completed return Boolean;

   private

      First_Flag, Second_Flag, Abort_Flag : Boolean := false;

   end TC_Prt;

   protected body TC_Prt is

      Procedure Set_First_Has_Arrived is

      begin

         First_Flag := true;

      end Set_First_Has_Arrived;

      Procedure Set_Second_Has_Arrived is

      begin

         Second_Flag := true;

      end Set_Second_Has_Arrived;

      Procedure Set_Abort_Has_Completed is

      begin

         Abort_Flag := true;

      end Set_Abort_Has_Completed;

      Function First_Has_Arrived return boolean is

      begin

         return First_Flag;

      end First_Has_Arrived;

      Function Second_Has_Arrived return boolean is

      begin

         return Second_Flag;

      end Second_has_Arrived;

      Function Abort_Has_Completed return boolean is

      begin

         return Abort_Flag;

      end Abort_Has_Completed;

   end TC_PRT;

   -- Assemble messages received from an external source

   --   Creates a message task for each. The message tasks remain extant

   --   for the life of the messages in the system.

   --      TC: The Line Driver task would normally be designed to loop

   --      continuously creating the messages as input is received.  Simulate

   --      this  but limit it to three dummy messages for this test and use

   --      special artificial checks to pace the messages out under controlled

   --      conditions for the test; allow it to terminate at the end

   --

   task body Line_Driver is

      Current_ID : integer := 1;

      TC_First_message_sent: Boolean := false;

      procedure Build_Credit_Record

                              ( Next_Transaction : acc_Transaction_Record ) is

         Dummy_Account : constant integer := 100;

      begin

            Next_Transaction.ID := Current_ID;

            Next_Transaction.Code := Credit;

            Next_Transaction.Account_Number := Dummy_Account;

            Current_ID := Current_ID + 1;

      end Build_Credit_Record;

      procedure Build_Debit_Record

                              ( Next_Transaction : acc_Transaction_Record ) is

         Dummy_Account : constant integer := 200;

      begin

            Next_Transaction.ID := Current_ID;

            Next_Transaction.Code := Debit;

            Next_Transaction.Account_Number := Dummy_Account;

            Current_ID := Current_ID + 1;

      end Build_Debit_Record;

   begin

      accept Start;       -- Wait for trigger from main

      for i in 1..3 loop  -- TC: arbitrarily limit to two credit messages

                          --     and one debit, then complete

         declare

            -- Create a task for the next message

            Next_Message_Task : acc_Message_Task := new Message_Task;

            -- Create a record for it

            Next_Transaction : acc_Transaction_Record :=

                                                       new Transaction_Record;

         begin

            if not TC_First_Message_Sent then

               -- send out the first message to start up the Credit task

               Build_Credit_Record ( Next_Transaction );

               Next_Message_Task.Accept_Transaction ( Next_Transaction );

               TC_First_Message_Sent := true;

            elsif not TC_Prt.Abort_Has_Completed then

               -- We have not yet processed the second message

               -- Wait to send the second message until we know the first

               -- has arrived at the Credit task and that task is in the

               -- accept body

               while not TC_Prt.First_Has_Arrived loop

                  delay ImpDef.Minimum_Task_Switch;

               end loop;

               -- We can now send the second message

               Build_Credit_Record( Next_Transaction );

               Next_Message_Task.Accept_Transaction ( Next_Transaction );

               -- Now wait for the second to arrive on the Credit input queue

               while not TC_Prt.Second_Has_Arrived loop

                  delay ImpDef.Minimum_Task_Switch;

               end loop;

               -- At this point: The Credit task is in the accept block

               -- dealing with the first message and the second message is

               -- is on the input queue

               abort Next_Message_Task.all;  -- Note: we are still in the

                                             -- declare block for the

                                             -- second message task

               -- Make absolutely certain that all the actions

               -- associated with the abort have been completed, that the

               -- task has gone from Abnormal right through to

               -- Termination.  All requeues that are to going to be

               -- cancelled will have been by the point of Termination.

               while not Next_Message_Task.all'terminated loop

                  delay ImpDef.Minimum_Task_Switch;

               end loop;

               -- We now signal the Credit task that the abort has taken place

               -- so that it can check that the entry queue is empty as the

               -- requeue should have been cancelled

               TC_Prt.Set_Abort_Has_Completed;

            else

               -- The main part of the test is complete. Send one Debit message

               -- as further exercise of the Distributor to ensure it has not

               -- been affected by the cancellation of the requeue.

               Build_Debit_Record ( Next_Transaction );

               Next_Message_Task.Accept_Transaction ( Next_Transaction );

            end if;

         end;   -- declare

      end loop;

   exception

      when others =>

         Report.Failed ("Unexpected exception in Line_Driver");

   end Line_Driver;

   task body Message_Task is

      TC_Original_Transaction_Code : Transaction_Code;

      This_Transaction : acc_Transaction_Record := new Transaction_Record;

   begin

      accept Accept_Transaction (In_Transaction : acc_Transaction_Record) do

         This_Transaction.all := In_Transaction.all;

      end Accept_Transaction;

      -- Note the original code to ensure correct return

      TC_Original_Transaction_Code := This_Transaction.Code;

      -- Queue up on Distributor's Input queue

      Distributor.Input ( This_Transaction );

      -- This task will now wait for the requeued rendezvous

      -- to complete before proceeding

      -- After the required computations have been performed

      -- return the Transaction_Record appropriately (probably to an output

      -- line driver)

      null;            -- stub

      -- For the test check that the return values are as expected

      if TC_Original_Transaction_Code /= This_Transaction.Code then

         -- Incorrect rendezvous

         Report.Failed ("Message Task: Incorrect code returned");

      end if;

      if This_Transaction.Code = Credit then

         if This_Transaction.Return_Value     /= Credit_Return or

            This_Transaction.TC_Message_Count /= 1             or not

            This_Transaction.TC_Thru_Dist                      then

               Report.Failed ("Expected path not traversed");

         end if;

         TC_Credit_Message_Complete.Set_True;

      else

         if This_Transaction.Return_Value     /= Debit_Return  or

            This_Transaction.TC_Message_Count /= 1             or not

            This_Transaction.TC_Thru_Dist                      then

               Report.Failed ("Expected path not traversed");

         end if;

         TC_Debit_Message_Complete.Set_True;

      end if;

   exception

      when others =>

         Report.Failed ("Unexpected exception in Message_Task");

   end Message_Task;

   -- Dispose each input Transaction_Record to the appropriate

   -- computation tasks

   --

   task body Distributor is

   begin

      loop

         select

            accept Input (Transaction : acc_Transaction_Record) do

               -- Show that this message did pass through the Distributor Task

               Transaction.TC_Thru_Dist := true;

               -- Pass this transaction on the the appropriate computation

               -- task

               case Transaction.Code is

                  when Credit =>

                     requeue Credit_Computation.Input with abort;

                  when Debit =>

                     requeue Debit_Computation.Input with abort;

               end case;

            end Input;

         or

            terminate;

         end select;

      end loop;

   exception

      when others =>

         Report.Failed ("Unexpected exception in Distributor");

   end Distributor;

   -- Computation task.

   --   Note:  After the computation is performed in this task and the

   --          accept body is completed the rendezvous in the original

   --          message task is completed.

   task body Credit_Computation is

      Message_Count   : integer := 0;

   begin

      loop

         select

            accept Input ( Transaction : acc_Transaction_Record) do

               -- Perform the computations required for this transaction

               --

               null;     -- stub

               -- The rest of this code is for Test Control

               --

               if not Transaction.TC_Thru_Dist then

                  Report.Failed

                         ("Credit Task: Wrong queue, Distributor bypassed");

               end if;

               if Transaction.code /= Credit then

                  Report.Failed

                         ("Credit Task: Requeue delivered to the wrong queue");

               end if;

               -- for the test plug a known value and count

               Transaction.Return_Value := Credit_Return;

               -- one, and only one message should pass through

               if Message_Count /= 0 then

                  Report.Failed ("Aborted Requeue was not cancelled -1");

               end if;

               Message_Count := Message_Count + 1;

               Transaction.TC_Message_Count := Message_Count;

               -- Having done the basic housekeeping we now need to signal

               -- that we are in the accept body of the credit task.  The

               -- first message has arrived and the Line Driver may now send

               -- the second one

               TC_Prt.Set_First_Has_Arrived;

               -- Now wait for the second to arrive

               while Input'Count = 0 loop

                  delay ImpDef.Minimum_Task_Switch;

               end loop;

               -- Second message has been requeued - the Line driver may

               -- now abort the calling task

               TC_Prt.Set_Second_Has_Arrived;

               -- Now wait for the Line Driver to signal that the abort of

               -- the first task is complete - the requeue should be cancelled

               -- at this time

               while not TC_Prt.Abort_Has_Completed loop

                  delay ImpDef.Minimum_Task_Switch;

               end loop;

               if Input'Count /=0 then

                  Report.Failed ("Aborted Requeue was not cancelled -2");

               end if;

               -- We can now complete the rendezvous with the first caller

            end Input;

         or

            terminate;

         end select;

      end loop;

   exception

      when others =>

         Report.Failed ("Unexpected exception in Credit_Computation");

   end Credit_Computation;

   -- Computation task.

   --   Note:  After the computation is performed in this task and the

   --          accept body is completed the rendezvous in the original

   --          message task is completed.

   task body Debit_Computation is

      Message_Count   : integer := 0;

   begin

      loop

         select

            accept Input (Transaction : acc_Transaction_Record) do

               -- Perform the computations required for this message

               --

               null;      -- stub

               -- The rest of this code is for Test Control

               --

               if not Transaction.TC_Thru_Dist then

                  Report.Failed

                         ("Debit Task: Wrong queue, Distributor bypassed");

               end if;

               if Transaction.code /= Debit then

                  Report.Failed

                         ("Debit Task: Requeue delivered to the wrong queue");

               end if;

               -- for the test plug a known value and count

               Transaction.Return_Value := Debit_Return;

               -- one, and only one, message should pass through

               Message_Count := Message_Count + 1;

               Transaction.TC_Message_Count := Message_Count;

            end Input;

         or

            terminate;

         end select;

      end loop;

   exception

      when others =>

         Report.Failed ("Unexpected exception in Debit_Computation");

   end Debit_Computation;

begin -- c954013

   Report.Test ("C954013", "Abort a task that has a call requeued");

   Line_Driver.Start;   -- start the test

   -- Wait for the message tasks to complete before calling Report.Result.

   -- Although two Credit tasks are generated one is aborted so only

   -- one completes, thus a single flag is sufficient

   -- Note: the test will hang here if there is a problem with the

   -- completion of the tasks

   while not (TC_Credit_Message_Complete.Value and

              TC_Debit_Message_Complete.Value) loop

      delay ImpDef.Minimum_Task_Switch;

   end loop;

   Report.Result;

end C954013;