OpenCores
URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.5.1/] [gcc/] [value-prof.c] - Blame information for rev 645

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 280 jeremybenn
/* Transformations based on profile information for values.
2
   Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software
3
   Foundation, Inc.
4
 
5
This file is part of GCC.
6
 
7
GCC is free software; you can redistribute it and/or modify it under
8
the terms of the GNU General Public License as published by the Free
9
Software Foundation; either version 3, or (at your option) any later
10
version.
11
 
12
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
13
WARRANTY; without even the implied warranty of MERCHANTABILITY or
14
FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
15
for more details.
16
 
17
You should have received a copy of the GNU General Public License
18
along with GCC; see the file COPYING3.  If not see
19
<http://www.gnu.org/licenses/>.  */
20
 
21
#include "config.h"
22
#include "system.h"
23
#include "coretypes.h"
24
#include "tm.h"
25
#include "rtl.h"
26
#include "expr.h"
27
#include "hard-reg-set.h"
28
#include "basic-block.h"
29
#include "value-prof.h"
30
#include "output.h"
31
#include "flags.h"
32
#include "insn-config.h"
33
#include "recog.h"
34
#include "optabs.h"
35
#include "regs.h"
36
#include "ggc.h"
37
#include "tree-flow.h"
38
#include "tree-flow-inline.h"
39
#include "diagnostic.h"
40
#include "coverage.h"
41
#include "tree.h"
42
#include "gcov-io.h"
43
#include "cgraph.h"
44
#include "timevar.h"
45
#include "tree-pass.h"
46
#include "toplev.h"
47
#include "pointer-set.h"
48
 
49
static struct value_prof_hooks *value_prof_hooks;
50
 
51
/* In this file value profile based optimizations are placed.  Currently the
52
   following optimizations are implemented (for more detailed descriptions
53
   see comments at value_profile_transformations):
54
 
55
   1) Division/modulo specialization.  Provided that we can determine that the
56
      operands of the division have some special properties, we may use it to
57
      produce more effective code.
58
   2) Speculative prefetching.  If we are able to determine that the difference
59
      between addresses accessed by a memory reference is usually constant, we
60
      may add the prefetch instructions.
61
      FIXME: This transformation was removed together with RTL based value
62
      profiling.
63
 
64
   3) Indirect/virtual call specialization. If we can determine most
65
      common function callee in indirect/virtual call. We can use this
66
      information to improve code effectiveness (especially info for
67
      inliner).
68
 
69
   Every such optimization should add its requirements for profiled values to
70
   insn_values_to_profile function.  This function is called from branch_prob
71
   in profile.c and the requested values are instrumented by it in the first
72
   compilation with -fprofile-arcs.  The optimization may then read the
73
   gathered data in the second compilation with -fbranch-probabilities.
74
 
75
   The measured data is pointed to from the histograms
76
   field of the statement annotation of the instrumented insns.  It is
77
   kept as a linked list of struct histogram_value_t's, which contain the
78
   same information as above.  */
79
 
80
 
81
static tree gimple_divmod_fixed_value (gimple, tree, int, gcov_type, gcov_type);
82
static tree gimple_mod_pow2 (gimple, int, gcov_type, gcov_type);
83
static tree gimple_mod_subtract (gimple, int, int, int, gcov_type, gcov_type,
84
                                 gcov_type);
85
static bool gimple_divmod_fixed_value_transform (gimple_stmt_iterator *);
86
static bool gimple_mod_pow2_value_transform (gimple_stmt_iterator *);
87
static bool gimple_mod_subtract_transform (gimple_stmt_iterator *);
88
static bool gimple_stringops_transform (gimple_stmt_iterator *);
89
static bool gimple_ic_transform (gimple);
90
 
91
/* Allocate histogram value.  */
92
 
93
static histogram_value
94
gimple_alloc_histogram_value (struct function *fun ATTRIBUTE_UNUSED,
95
                              enum hist_type type, gimple stmt, tree value)
96
{
97
   histogram_value hist = (histogram_value) xcalloc (1, sizeof (*hist));
98
   hist->hvalue.value = value;
99
   hist->hvalue.stmt = stmt;
100
   hist->type = type;
101
   return hist;
102
}
103
 
104
/* Hash value for histogram.  */
105
 
106
static hashval_t
107
histogram_hash (const void *x)
108
{
109
  return htab_hash_pointer (((const_histogram_value)x)->hvalue.stmt);
110
}
111
 
112
/* Return nonzero if decl_id of die_struct X is the same as UID of decl *Y.  */
113
 
114
static int
115
histogram_eq (const void *x, const void *y)
116
{
117
  return ((const_histogram_value) x)->hvalue.stmt == (const_gimple) y;
118
}
119
 
120
/* Set histogram for STMT.  */
121
 
122
static void
123
set_histogram_value (struct function *fun, gimple stmt, histogram_value hist)
124
{
125
  void **loc;
126
  if (!hist && !VALUE_HISTOGRAMS (fun))
127
    return;
128
  if (!VALUE_HISTOGRAMS (fun))
129
    VALUE_HISTOGRAMS (fun) = htab_create (1, histogram_hash,
130
                                           histogram_eq, NULL);
131
  loc = htab_find_slot_with_hash (VALUE_HISTOGRAMS (fun), stmt,
132
                                  htab_hash_pointer (stmt),
133
                                  hist ? INSERT : NO_INSERT);
134
  if (!hist)
135
    {
136
      if (loc)
137
        htab_clear_slot (VALUE_HISTOGRAMS (fun), loc);
138
      return;
139
    }
140
  *loc = hist;
141
}
142
 
143
/* Get histogram list for STMT.  */
144
 
145
histogram_value
146
gimple_histogram_value (struct function *fun, gimple stmt)
147
{
148
  if (!VALUE_HISTOGRAMS (fun))
149
    return NULL;
150
  return (histogram_value) htab_find_with_hash (VALUE_HISTOGRAMS (fun), stmt,
151
                                                htab_hash_pointer (stmt));
152
}
153
 
154
/* Add histogram for STMT.  */
155
 
156
void
157
gimple_add_histogram_value (struct function *fun, gimple stmt,
158
                            histogram_value hist)
159
{
160
  hist->hvalue.next = gimple_histogram_value (fun, stmt);
161
  set_histogram_value (fun, stmt, hist);
162
}
163
 
164
 
165
/* Remove histogram HIST from STMT's histogram list.  */
166
 
167
void
168
gimple_remove_histogram_value (struct function *fun, gimple stmt,
169
                               histogram_value hist)
170
{
171
  histogram_value hist2 = gimple_histogram_value (fun, stmt);
172
  if (hist == hist2)
173
    {
174
      set_histogram_value (fun, stmt, hist->hvalue.next);
175
    }
176
  else
177
    {
178
      while (hist2->hvalue.next != hist)
179
        hist2 = hist2->hvalue.next;
180
      hist2->hvalue.next = hist->hvalue.next;
181
    }
182
  free (hist->hvalue.counters);
183
#ifdef ENABLE_CHECKING
184
  memset (hist, 0xab, sizeof (*hist));
185
#endif
186
  free (hist);
187
}
188
 
189
 
190
/* Lookup histogram of type TYPE in the STMT.  */
191
 
192
histogram_value
193
gimple_histogram_value_of_type (struct function *fun, gimple stmt,
194
                                enum hist_type type)
195
{
196
  histogram_value hist;
197
  for (hist = gimple_histogram_value (fun, stmt); hist;
198
       hist = hist->hvalue.next)
199
    if (hist->type == type)
200
      return hist;
201
  return NULL;
202
}
203
 
204
/* Dump information about HIST to DUMP_FILE.  */
205
 
206
static void
207
dump_histogram_value (FILE *dump_file, histogram_value hist)
208
{
209
  switch (hist->type)
210
    {
211
    case HIST_TYPE_INTERVAL:
212
      fprintf (dump_file, "Interval counter range %d -- %d",
213
               hist->hdata.intvl.int_start,
214
               (hist->hdata.intvl.int_start
215
                + hist->hdata.intvl.steps - 1));
216
      if (hist->hvalue.counters)
217
        {
218
           unsigned int i;
219
           fprintf(dump_file, " [");
220
           for (i = 0; i < hist->hdata.intvl.steps; i++)
221
             fprintf (dump_file, " %d:"HOST_WIDEST_INT_PRINT_DEC,
222
                      hist->hdata.intvl.int_start + i,
223
                      (HOST_WIDEST_INT) hist->hvalue.counters[i]);
224
           fprintf (dump_file, " ] outside range:"HOST_WIDEST_INT_PRINT_DEC,
225
                    (HOST_WIDEST_INT) hist->hvalue.counters[i]);
226
        }
227
      fprintf (dump_file, ".\n");
228
      break;
229
 
230
    case HIST_TYPE_POW2:
231
      fprintf (dump_file, "Pow2 counter ");
232
      if (hist->hvalue.counters)
233
        {
234
           fprintf (dump_file, "pow2:"HOST_WIDEST_INT_PRINT_DEC
235
                    " nonpow2:"HOST_WIDEST_INT_PRINT_DEC,
236
                    (HOST_WIDEST_INT) hist->hvalue.counters[0],
237
                    (HOST_WIDEST_INT) hist->hvalue.counters[1]);
238
        }
239
      fprintf (dump_file, ".\n");
240
      break;
241
 
242
    case HIST_TYPE_SINGLE_VALUE:
243
      fprintf (dump_file, "Single value ");
244
      if (hist->hvalue.counters)
245
        {
246
           fprintf (dump_file, "value:"HOST_WIDEST_INT_PRINT_DEC
247
                    " match:"HOST_WIDEST_INT_PRINT_DEC
248
                    " wrong:"HOST_WIDEST_INT_PRINT_DEC,
249
                    (HOST_WIDEST_INT) hist->hvalue.counters[0],
250
                    (HOST_WIDEST_INT) hist->hvalue.counters[1],
251
                    (HOST_WIDEST_INT) hist->hvalue.counters[2]);
252
        }
253
      fprintf (dump_file, ".\n");
254
      break;
255
 
256
    case HIST_TYPE_AVERAGE:
257
      fprintf (dump_file, "Average value ");
258
      if (hist->hvalue.counters)
259
        {
260
           fprintf (dump_file, "sum:"HOST_WIDEST_INT_PRINT_DEC
261
                    " times:"HOST_WIDEST_INT_PRINT_DEC,
262
                    (HOST_WIDEST_INT) hist->hvalue.counters[0],
263
                    (HOST_WIDEST_INT) hist->hvalue.counters[1]);
264
        }
265
      fprintf (dump_file, ".\n");
266
      break;
267
 
268
    case HIST_TYPE_IOR:
269
      fprintf (dump_file, "IOR value ");
270
      if (hist->hvalue.counters)
271
        {
272
           fprintf (dump_file, "ior:"HOST_WIDEST_INT_PRINT_DEC,
273
                    (HOST_WIDEST_INT) hist->hvalue.counters[0]);
274
        }
275
      fprintf (dump_file, ".\n");
276
      break;
277
 
278
    case HIST_TYPE_CONST_DELTA:
279
      fprintf (dump_file, "Constant delta ");
280
      if (hist->hvalue.counters)
281
        {
282
           fprintf (dump_file, "value:"HOST_WIDEST_INT_PRINT_DEC
283
                    " match:"HOST_WIDEST_INT_PRINT_DEC
284
                    " wrong:"HOST_WIDEST_INT_PRINT_DEC,
285
                    (HOST_WIDEST_INT) hist->hvalue.counters[0],
286
                    (HOST_WIDEST_INT) hist->hvalue.counters[1],
287
                    (HOST_WIDEST_INT) hist->hvalue.counters[2]);
288
        }
289
      fprintf (dump_file, ".\n");
290
      break;
291
    case HIST_TYPE_INDIR_CALL:
292
      fprintf (dump_file, "Indirect call ");
293
      if (hist->hvalue.counters)
294
        {
295
           fprintf (dump_file, "value:"HOST_WIDEST_INT_PRINT_DEC
296
                    " match:"HOST_WIDEST_INT_PRINT_DEC
297
                    " all:"HOST_WIDEST_INT_PRINT_DEC,
298
                    (HOST_WIDEST_INT) hist->hvalue.counters[0],
299
                    (HOST_WIDEST_INT) hist->hvalue.counters[1],
300
                    (HOST_WIDEST_INT) hist->hvalue.counters[2]);
301
        }
302
      fprintf (dump_file, ".\n");
303
      break;
304
   }
305
}
306
 
307
/* Dump all histograms attached to STMT to DUMP_FILE.  */
308
 
309
void
310
dump_histograms_for_stmt (struct function *fun, FILE *dump_file, gimple stmt)
311
{
312
  histogram_value hist;
313
  for (hist = gimple_histogram_value (fun, stmt); hist; hist = hist->hvalue.next)
314
   dump_histogram_value (dump_file, hist);
315
}
316
 
317
/* Remove all histograms associated with STMT.  */
318
 
319
void
320
gimple_remove_stmt_histograms (struct function *fun, gimple stmt)
321
{
322
  histogram_value val;
323
  while ((val = gimple_histogram_value (fun, stmt)) != NULL)
324
    gimple_remove_histogram_value (fun, stmt, val);
325
}
326
 
327
/* Duplicate all histograms associates with OSTMT to STMT.  */
328
 
329
void
330
gimple_duplicate_stmt_histograms (struct function *fun, gimple stmt,
331
                                  struct function *ofun, gimple ostmt)
332
{
333
  histogram_value val;
334
  for (val = gimple_histogram_value (ofun, ostmt); val != NULL; val = val->hvalue.next)
335
    {
336
      histogram_value new_val = gimple_alloc_histogram_value (fun, val->type, NULL, NULL);
337
      memcpy (new_val, val, sizeof (*val));
338
      new_val->hvalue.stmt = stmt;
339
      new_val->hvalue.counters = XNEWVAR (gcov_type, sizeof (*new_val->hvalue.counters) * new_val->n_counters);
340
      memcpy (new_val->hvalue.counters, val->hvalue.counters, sizeof (*new_val->hvalue.counters) * new_val->n_counters);
341
      gimple_add_histogram_value (fun, stmt, new_val);
342
    }
343
}
344
 
345
 
346
/* Move all histograms associated with OSTMT to STMT.  */
347
 
348
void
349
gimple_move_stmt_histograms (struct function *fun, gimple stmt, gimple ostmt)
350
{
351
  histogram_value val = gimple_histogram_value (fun, ostmt);
352
  if (val)
353
    {
354
      /* The following three statements can't be reordered,
355
         because histogram hashtab relies on stmt field value
356
         for finding the exact slot. */
357
      set_histogram_value (fun, ostmt, NULL);
358
      for (; val != NULL; val = val->hvalue.next)
359
        val->hvalue.stmt = stmt;
360
      set_histogram_value (fun, stmt, val);
361
    }
362
}
363
 
364
static bool error_found = false;
365
 
366
/* Helper function for verify_histograms.  For each histogram reachable via htab
367
   walk verify that it was reached via statement walk.  */
368
 
369
static int
370
visit_hist (void **slot, void *data)
371
{
372
  struct pointer_set_t *visited = (struct pointer_set_t *) data;
373
  histogram_value hist = *(histogram_value *) slot;
374
  if (!pointer_set_contains (visited, hist))
375
    {
376
      error ("Dead histogram");
377
      dump_histogram_value (stderr, hist);
378
      debug_gimple_stmt (hist->hvalue.stmt);
379
      error_found = true;
380
    }
381
  return 1;
382
}
383
 
384
 
385
/* Verify sanity of the histograms.  */
386
 
387
void
388
verify_histograms (void)
389
{
390
  basic_block bb;
391
  gimple_stmt_iterator gsi;
392
  histogram_value hist;
393
  struct pointer_set_t *visited_hists;
394
 
395
  error_found = false;
396
  visited_hists = pointer_set_create ();
397
  FOR_EACH_BB (bb)
398
    for (gsi = gsi_start_bb (bb); !gsi_end_p (gsi); gsi_next (&gsi))
399
      {
400
        gimple stmt = gsi_stmt (gsi);
401
 
402
        for (hist = gimple_histogram_value (cfun, stmt); hist;
403
             hist = hist->hvalue.next)
404
          {
405
            if (hist->hvalue.stmt != stmt)
406
              {
407
                error ("Histogram value statement does not correspond to "
408
                       "the statement it is associated with");
409
                debug_gimple_stmt (stmt);
410
                dump_histogram_value (stderr, hist);
411
                error_found = true;
412
              }
413
            pointer_set_insert (visited_hists, hist);
414
          }
415
      }
416
  if (VALUE_HISTOGRAMS (cfun))
417
    htab_traverse (VALUE_HISTOGRAMS (cfun), visit_hist, visited_hists);
418
  pointer_set_destroy (visited_hists);
419
  if (error_found)
420
    internal_error ("verify_histograms failed");
421
}
422
 
423
/* Helper function for verify_histograms.  For each histogram reachable via htab
424
   walk verify that it was reached via statement walk.  */
425
 
426
static int
427
free_hist (void **slot, void *data ATTRIBUTE_UNUSED)
428
{
429
  histogram_value hist = *(histogram_value *) slot;
430
  free (hist->hvalue.counters);
431
#ifdef ENABLE_CHECKING
432
  memset (hist, 0xab, sizeof (*hist));
433
#endif
434
  free (hist);
435
  return 1;
436
}
437
 
438
void
439
free_histograms (void)
440
{
441
  if (VALUE_HISTOGRAMS (cfun))
442
    {
443
      htab_traverse (VALUE_HISTOGRAMS (cfun), free_hist, NULL);
444
      htab_delete (VALUE_HISTOGRAMS (cfun));
445
      VALUE_HISTOGRAMS (cfun) = NULL;
446
    }
447
}
448
 
449
 
450
/* The overall number of invocations of the counter should match
451
   execution count of basic block.  Report it as error rather than
452
   internal error as it might mean that user has misused the profile
453
   somehow.  */
454
 
455
static bool
456
check_counter (gimple stmt, const char * name,
457
               gcov_type *count, gcov_type *all, gcov_type bb_count)
458
{
459
  if (*all != bb_count || *count > *all)
460
    {
461
      location_t locus;
462
      locus = (stmt != NULL)
463
              ? gimple_location (stmt)
464
              : DECL_SOURCE_LOCATION (current_function_decl);
465
      if (flag_profile_correction)
466
        {
467
          inform (locus, "Correcting inconsistent value profile: "
468
                  "%s profiler overall count (%d) does not match BB count "
469
                  "(%d)", name, (int)*all, (int)bb_count);
470
          *all = bb_count;
471
          if (*count > *all)
472
            *count = *all;
473
          return false;
474
        }
475
      else
476
        {
477
          error_at (locus, "Corrupted value profile: %s "
478
                    "profiler overall count (%d) does not match BB count (%d)",
479
                    name, (int)*all, (int)bb_count);
480
          return true;
481
        }
482
    }
483
 
484
  return false;
485
}
486
 
487
 
488
/* GIMPLE based transformations. */
489
 
490
static bool
491
gimple_value_profile_transformations (void)
492
{
493
  basic_block bb;
494
  gimple_stmt_iterator gsi;
495
  bool changed = false;
496
 
497
  FOR_EACH_BB (bb)
498
    {
499
      for (gsi = gsi_start_bb (bb); !gsi_end_p (gsi); gsi_next (&gsi))
500
        {
501
          gimple stmt = gsi_stmt (gsi);
502
          histogram_value th = gimple_histogram_value (cfun, stmt);
503
          if (!th)
504
            continue;
505
 
506
          if (dump_file)
507
            {
508
              fprintf (dump_file, "Trying transformations on stmt ");
509
              print_gimple_stmt (dump_file, stmt, 0, TDF_SLIM);
510
              dump_histograms_for_stmt (cfun, dump_file, stmt);
511
            }
512
 
513
          /* Transformations:  */
514
          /* The order of things in this conditional controls which
515
             transformation is used when more than one is applicable.  */
516
          /* It is expected that any code added by the transformations
517
             will be added before the current statement, and that the
518
             current statement remain valid (although possibly
519
             modified) upon return.  */
520
          if (flag_value_profile_transformations
521
              && (gimple_mod_subtract_transform (&gsi)
522
                  || gimple_divmod_fixed_value_transform (&gsi)
523
                  || gimple_mod_pow2_value_transform (&gsi)
524
                  || gimple_stringops_transform (&gsi)
525
                  || gimple_ic_transform (stmt)))
526
            {
527
              stmt = gsi_stmt (gsi);
528
              changed = true;
529
              /* Original statement may no longer be in the same block. */
530
              if (bb != gimple_bb (stmt))
531
                {
532
                  bb = gimple_bb (stmt);
533
                  gsi = gsi_for_stmt (stmt);
534
                }
535
            }
536
        }
537
    }
538
 
539
  if (changed)
540
    {
541
      counts_to_freqs ();
542
    }
543
 
544
  return changed;
545
}
546
 
547
 
548
/* Generate code for transformation 1 (with parent gimple assignment
549
   STMT and probability of taking the optimal path PROB, which is
550
   equivalent to COUNT/ALL within roundoff error).  This generates the
551
   result into a temp and returns the temp; it does not replace or
552
   alter the original STMT.  */
553
 
554
static tree
555
gimple_divmod_fixed_value (gimple stmt, tree value, int prob, gcov_type count,
556
                           gcov_type all)
557
{
558
  gimple stmt1, stmt2, stmt3;
559
  tree tmp1, tmp2, tmpv;
560
  gimple bb1end, bb2end, bb3end;
561
  basic_block bb, bb2, bb3, bb4;
562
  tree optype, op1, op2;
563
  edge e12, e13, e23, e24, e34;
564
  gimple_stmt_iterator gsi;
565
 
566
  gcc_assert (is_gimple_assign (stmt)
567
              && (gimple_assign_rhs_code (stmt) == TRUNC_DIV_EXPR
568
                  || gimple_assign_rhs_code (stmt) == TRUNC_MOD_EXPR));
569
 
570
  optype = TREE_TYPE (gimple_assign_lhs (stmt));
571
  op1 = gimple_assign_rhs1 (stmt);
572
  op2 = gimple_assign_rhs2 (stmt);
573
 
574
  bb = gimple_bb (stmt);
575
  gsi = gsi_for_stmt (stmt);
576
 
577
  tmpv = create_tmp_var (optype, "PROF");
578
  tmp1 = create_tmp_var (optype, "PROF");
579
  stmt1 = gimple_build_assign (tmpv, fold_convert (optype, value));
580
  stmt2 = gimple_build_assign (tmp1, op2);
581
  stmt3 = gimple_build_cond (NE_EXPR, tmp1, tmpv, NULL_TREE, NULL_TREE);
582
  gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT);
583
  gsi_insert_before (&gsi, stmt2, GSI_SAME_STMT);
584
  gsi_insert_before (&gsi, stmt3, GSI_SAME_STMT);
585
  bb1end = stmt3;
586
 
587
  tmp2 = create_tmp_var (optype, "PROF");
588
  stmt1 = gimple_build_assign_with_ops (gimple_assign_rhs_code (stmt), tmp2,
589
                                        op1, tmpv);
590
  gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT);
591
  bb2end = stmt1;
592
 
593
  stmt1 = gimple_build_assign_with_ops (gimple_assign_rhs_code (stmt), tmp2,
594
                                        op1, op2);
595
  gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT);
596
  bb3end = stmt1;
597
 
598
  /* Fix CFG. */
599
  /* Edge e23 connects bb2 to bb3, etc. */
600
  e12 = split_block (bb, bb1end);
601
  bb2 = e12->dest;
602
  bb2->count = count;
603
  e23 = split_block (bb2, bb2end);
604
  bb3 = e23->dest;
605
  bb3->count = all - count;
606
  e34 = split_block (bb3, bb3end);
607
  bb4 = e34->dest;
608
  bb4->count = all;
609
 
610
  e12->flags &= ~EDGE_FALLTHRU;
611
  e12->flags |= EDGE_FALSE_VALUE;
612
  e12->probability = prob;
613
  e12->count = count;
614
 
615
  e13 = make_edge (bb, bb3, EDGE_TRUE_VALUE);
616
  e13->probability = REG_BR_PROB_BASE - prob;
617
  e13->count = all - count;
618
 
619
  remove_edge (e23);
620
 
621
  e24 = make_edge (bb2, bb4, EDGE_FALLTHRU);
622
  e24->probability = REG_BR_PROB_BASE;
623
  e24->count = count;
624
 
625
  e34->probability = REG_BR_PROB_BASE;
626
  e34->count = all - count;
627
 
628
  return tmp2;
629
}
630
 
631
 
632
/* Do transform 1) on INSN if applicable.  */
633
 
634
static bool
635
gimple_divmod_fixed_value_transform (gimple_stmt_iterator *si)
636
{
637
  histogram_value histogram;
638
  enum tree_code code;
639
  gcov_type val, count, all;
640
  tree result, value, tree_val;
641
  gcov_type prob;
642
  gimple stmt;
643
 
644
  stmt = gsi_stmt (*si);
645
  if (gimple_code (stmt) != GIMPLE_ASSIGN)
646
    return false;
647
 
648
  if (!INTEGRAL_TYPE_P (TREE_TYPE (gimple_assign_lhs (stmt))))
649
    return false;
650
 
651
  code = gimple_assign_rhs_code (stmt);
652
 
653
  if (code != TRUNC_DIV_EXPR && code != TRUNC_MOD_EXPR)
654
    return false;
655
 
656
  histogram = gimple_histogram_value_of_type (cfun, stmt,
657
                                              HIST_TYPE_SINGLE_VALUE);
658
  if (!histogram)
659
    return false;
660
 
661
  value = histogram->hvalue.value;
662
  val = histogram->hvalue.counters[0];
663
  count = histogram->hvalue.counters[1];
664
  all = histogram->hvalue.counters[2];
665
  gimple_remove_histogram_value (cfun, stmt, histogram);
666
 
667
  /* We require that count is at least half of all; this means
668
     that for the transformation to fire the value must be constant
669
     at least 50% of time (and 75% gives the guarantee of usage).  */
670
  if (simple_cst_equal (gimple_assign_rhs2 (stmt), value) != 1
671
      || 2 * count < all
672
      || optimize_bb_for_size_p (gimple_bb (stmt)))
673
    return false;
674
 
675
  if (check_counter (stmt, "value", &count, &all, gimple_bb (stmt)->count))
676
    return false;
677
 
678
  /* Compute probability of taking the optimal path.  */
679
  if (all > 0)
680
    prob = (count * REG_BR_PROB_BASE + all / 2) / all;
681
  else
682
    prob = 0;
683
 
684
  tree_val = build_int_cst_wide (get_gcov_type (),
685
                                 (unsigned HOST_WIDE_INT) val,
686
                                 val >> (HOST_BITS_PER_WIDE_INT - 1) >> 1);
687
  result = gimple_divmod_fixed_value (stmt, tree_val, prob, count, all);
688
 
689
  if (dump_file)
690
    {
691
      fprintf (dump_file, "Div/mod by constant ");
692
      print_generic_expr (dump_file, value, TDF_SLIM);
693
      fprintf (dump_file, "=");
694
      print_generic_expr (dump_file, tree_val, TDF_SLIM);
695
      fprintf (dump_file, " transformation on insn ");
696
      print_gimple_stmt (dump_file, stmt, 0, TDF_SLIM);
697
    }
698
 
699
  gimple_assign_set_rhs_from_tree (si, result);
700
 
701
  return true;
702
}
703
 
704
/* Generate code for transformation 2 (with parent gimple assign STMT and
705
   probability of taking the optimal path PROB, which is equivalent to COUNT/ALL
706
   within roundoff error).  This generates the result into a temp and returns
707
   the temp; it does not replace or alter the original STMT.  */
708
static tree
709
gimple_mod_pow2 (gimple stmt, int prob, gcov_type count, gcov_type all)
710
{
711
  gimple stmt1, stmt2, stmt3, stmt4;
712
  tree tmp2, tmp3;
713
  gimple bb1end, bb2end, bb3end;
714
  basic_block bb, bb2, bb3, bb4;
715
  tree optype, op1, op2;
716
  edge e12, e13, e23, e24, e34;
717
  gimple_stmt_iterator gsi;
718
  tree result;
719
 
720
  gcc_assert (is_gimple_assign (stmt)
721
              && gimple_assign_rhs_code (stmt) == TRUNC_MOD_EXPR);
722
 
723
  optype = TREE_TYPE (gimple_assign_lhs (stmt));
724
  op1 = gimple_assign_rhs1 (stmt);
725
  op2 = gimple_assign_rhs2 (stmt);
726
 
727
  bb = gimple_bb (stmt);
728
  gsi = gsi_for_stmt (stmt);
729
 
730
  result = create_tmp_var (optype, "PROF");
731
  tmp2 = create_tmp_var (optype, "PROF");
732
  tmp3 = create_tmp_var (optype, "PROF");
733
  stmt2 = gimple_build_assign_with_ops (PLUS_EXPR, tmp2, op2,
734
                                        build_int_cst (optype, -1));
735
  stmt3 = gimple_build_assign_with_ops (BIT_AND_EXPR, tmp3, tmp2, op2);
736
  stmt4 = gimple_build_cond (NE_EXPR, tmp3, build_int_cst (optype, 0),
737
                             NULL_TREE, NULL_TREE);
738
  gsi_insert_before (&gsi, stmt2, GSI_SAME_STMT);
739
  gsi_insert_before (&gsi, stmt3, GSI_SAME_STMT);
740
  gsi_insert_before (&gsi, stmt4, GSI_SAME_STMT);
741
  bb1end = stmt4;
742
 
743
  /* tmp2 == op2-1 inherited from previous block.  */
744
  stmt1 = gimple_build_assign_with_ops (BIT_AND_EXPR, result, op1, tmp2);
745
  gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT);
746
  bb2end = stmt1;
747
 
748
  stmt1 = gimple_build_assign_with_ops (gimple_assign_rhs_code (stmt), result,
749
                                        op1, op2);
750
  gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT);
751
  bb3end = stmt1;
752
 
753
  /* Fix CFG. */
754
  /* Edge e23 connects bb2 to bb3, etc. */
755
  e12 = split_block (bb, bb1end);
756
  bb2 = e12->dest;
757
  bb2->count = count;
758
  e23 = split_block (bb2, bb2end);
759
  bb3 = e23->dest;
760
  bb3->count = all - count;
761
  e34 = split_block (bb3, bb3end);
762
  bb4 = e34->dest;
763
  bb4->count = all;
764
 
765
  e12->flags &= ~EDGE_FALLTHRU;
766
  e12->flags |= EDGE_FALSE_VALUE;
767
  e12->probability = prob;
768
  e12->count = count;
769
 
770
  e13 = make_edge (bb, bb3, EDGE_TRUE_VALUE);
771
  e13->probability = REG_BR_PROB_BASE - prob;
772
  e13->count = all - count;
773
 
774
  remove_edge (e23);
775
 
776
  e24 = make_edge (bb2, bb4, EDGE_FALLTHRU);
777
  e24->probability = REG_BR_PROB_BASE;
778
  e24->count = count;
779
 
780
  e34->probability = REG_BR_PROB_BASE;
781
  e34->count = all - count;
782
 
783
  return result;
784
}
785
 
786
/* Do transform 2) on INSN if applicable.  */
787
static bool
788
gimple_mod_pow2_value_transform (gimple_stmt_iterator *si)
789
{
790
  histogram_value histogram;
791
  enum tree_code code;
792
  gcov_type count, wrong_values, all;
793
  tree lhs_type, result, value;
794
  gcov_type prob;
795
  gimple stmt;
796
 
797
  stmt = gsi_stmt (*si);
798
  if (gimple_code (stmt) != GIMPLE_ASSIGN)
799
    return false;
800
 
801
  lhs_type = TREE_TYPE (gimple_assign_lhs (stmt));
802
  if (!INTEGRAL_TYPE_P (lhs_type))
803
    return false;
804
 
805
  code = gimple_assign_rhs_code (stmt);
806
 
807
  if (code != TRUNC_MOD_EXPR || !TYPE_UNSIGNED (lhs_type))
808
    return false;
809
 
810
  histogram = gimple_histogram_value_of_type (cfun, stmt, HIST_TYPE_POW2);
811
  if (!histogram)
812
    return false;
813
 
814
  value = histogram->hvalue.value;
815
  wrong_values = histogram->hvalue.counters[0];
816
  count = histogram->hvalue.counters[1];
817
 
818
  gimple_remove_histogram_value (cfun, stmt, histogram);
819
 
820
  /* We require that we hit a power of 2 at least half of all evaluations.  */
821
  if (simple_cst_equal (gimple_assign_rhs2 (stmt), value) != 1
822
      || count < wrong_values
823
      || optimize_bb_for_size_p (gimple_bb (stmt)))
824
    return false;
825
 
826
  if (dump_file)
827
    {
828
      fprintf (dump_file, "Mod power of 2 transformation on insn ");
829
      print_gimple_stmt (dump_file, stmt, 0, TDF_SLIM);
830
    }
831
 
832
  /* Compute probability of taking the optimal path.  */
833
  all = count + wrong_values;
834
 
835
  if (check_counter (stmt, "pow2", &count, &all, gimple_bb (stmt)->count))
836
    return false;
837
 
838
  if (all > 0)
839
    prob = (count * REG_BR_PROB_BASE + all / 2) / all;
840
  else
841
    prob = 0;
842
 
843
  result = gimple_mod_pow2 (stmt, prob, count, all);
844
 
845
  gimple_assign_set_rhs_from_tree (si, result);
846
 
847
  return true;
848
}
849
 
850
/* Generate code for transformations 3 and 4 (with parent gimple assign STMT, and
851
   NCOUNTS the number of cases to support.  Currently only NCOUNTS==0 or 1 is
852
   supported and this is built into this interface.  The probabilities of taking
853
   the optimal paths are PROB1 and PROB2, which are equivalent to COUNT1/ALL and
854
   COUNT2/ALL respectively within roundoff error).  This generates the
855
   result into a temp and returns the temp; it does not replace or alter
856
   the original STMT.  */
857
/* FIXME: Generalize the interface to handle NCOUNTS > 1.  */
858
 
859
static tree
860
gimple_mod_subtract (gimple stmt, int prob1, int prob2, int ncounts,
861
                     gcov_type count1, gcov_type count2, gcov_type all)
862
{
863
  gimple stmt1, stmt2, stmt3;
864
  tree tmp1;
865
  gimple bb1end, bb2end = NULL, bb3end;
866
  basic_block bb, bb2, bb3, bb4;
867
  tree optype, op1, op2;
868
  edge e12, e23 = 0, e24, e34, e14;
869
  gimple_stmt_iterator gsi;
870
  tree result;
871
 
872
  gcc_assert (is_gimple_assign (stmt)
873
              && gimple_assign_rhs_code (stmt) == TRUNC_MOD_EXPR);
874
 
875
  optype = TREE_TYPE (gimple_assign_lhs (stmt));
876
  op1 = gimple_assign_rhs1 (stmt);
877
  op2 = gimple_assign_rhs2 (stmt);
878
 
879
  bb = gimple_bb (stmt);
880
  gsi = gsi_for_stmt (stmt);
881
 
882
  result = create_tmp_var (optype, "PROF");
883
  tmp1 = create_tmp_var (optype, "PROF");
884
  stmt1 = gimple_build_assign (result, op1);
885
  stmt2 = gimple_build_assign (tmp1, op2);
886
  stmt3 = gimple_build_cond (LT_EXPR, result, tmp1, NULL_TREE, NULL_TREE);
887
  gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT);
888
  gsi_insert_before (&gsi, stmt2, GSI_SAME_STMT);
889
  gsi_insert_before (&gsi, stmt3, GSI_SAME_STMT);
890
  bb1end = stmt3;
891
 
892
  if (ncounts)  /* Assumed to be 0 or 1 */
893
    {
894
      stmt1 = gimple_build_assign_with_ops (MINUS_EXPR, result, result, tmp1);
895
      stmt2 = gimple_build_cond (LT_EXPR, result, tmp1, NULL_TREE, NULL_TREE);
896
      gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT);
897
      gsi_insert_before (&gsi, stmt2, GSI_SAME_STMT);
898
      bb2end = stmt2;
899
    }
900
 
901
  /* Fallback case. */
902
  stmt1 = gimple_build_assign_with_ops (gimple_assign_rhs_code (stmt), result,
903
                                        result, tmp1);
904
  gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT);
905
  bb3end = stmt1;
906
 
907
  /* Fix CFG. */
908
  /* Edge e23 connects bb2 to bb3, etc. */
909
  /* However block 3 is optional; if it is not there, references
910
     to 3 really refer to block 2. */
911
  e12 = split_block (bb, bb1end);
912
  bb2 = e12->dest;
913
  bb2->count = all - count1;
914
 
915
  if (ncounts)  /* Assumed to be 0 or 1.  */
916
    {
917
      e23 = split_block (bb2, bb2end);
918
      bb3 = e23->dest;
919
      bb3->count = all - count1 - count2;
920
    }
921
 
922
  e34 = split_block (ncounts ? bb3 : bb2, bb3end);
923
  bb4 = e34->dest;
924
  bb4->count = all;
925
 
926
  e12->flags &= ~EDGE_FALLTHRU;
927
  e12->flags |= EDGE_FALSE_VALUE;
928
  e12->probability = REG_BR_PROB_BASE - prob1;
929
  e12->count = all - count1;
930
 
931
  e14 = make_edge (bb, bb4, EDGE_TRUE_VALUE);
932
  e14->probability = prob1;
933
  e14->count = count1;
934
 
935
  if (ncounts)  /* Assumed to be 0 or 1.  */
936
    {
937
      e23->flags &= ~EDGE_FALLTHRU;
938
      e23->flags |= EDGE_FALSE_VALUE;
939
      e23->count = all - count1 - count2;
940
      e23->probability = REG_BR_PROB_BASE - prob2;
941
 
942
      e24 = make_edge (bb2, bb4, EDGE_TRUE_VALUE);
943
      e24->probability = prob2;
944
      e24->count = count2;
945
    }
946
 
947
  e34->probability = REG_BR_PROB_BASE;
948
  e34->count = all - count1 - count2;
949
 
950
  return result;
951
}
952
 
953
 
954
/* Do transforms 3) and 4) on the statement pointed-to by SI if applicable.  */
955
 
956
static bool
957
gimple_mod_subtract_transform (gimple_stmt_iterator *si)
958
{
959
  histogram_value histogram;
960
  enum tree_code code;
961
  gcov_type count, wrong_values, all;
962
  tree lhs_type, result;
963
  gcov_type prob1, prob2;
964
  unsigned int i, steps;
965
  gcov_type count1, count2;
966
  gimple stmt;
967
 
968
  stmt = gsi_stmt (*si);
969
  if (gimple_code (stmt) != GIMPLE_ASSIGN)
970
    return false;
971
 
972
  lhs_type = TREE_TYPE (gimple_assign_lhs (stmt));
973
  if (!INTEGRAL_TYPE_P (lhs_type))
974
    return false;
975
 
976
  code = gimple_assign_rhs_code (stmt);
977
 
978
  if (code != TRUNC_MOD_EXPR || !TYPE_UNSIGNED (lhs_type))
979
    return false;
980
 
981
  histogram = gimple_histogram_value_of_type (cfun, stmt, HIST_TYPE_INTERVAL);
982
  if (!histogram)
983
    return false;
984
 
985
  all = 0;
986
  wrong_values = 0;
987
  for (i = 0; i < histogram->hdata.intvl.steps; i++)
988
    all += histogram->hvalue.counters[i];
989
 
990
  wrong_values += histogram->hvalue.counters[i];
991
  wrong_values += histogram->hvalue.counters[i+1];
992
  steps = histogram->hdata.intvl.steps;
993
  all += wrong_values;
994
  count1 = histogram->hvalue.counters[0];
995
  count2 = histogram->hvalue.counters[1];
996
 
997
  /* Compute probability of taking the optimal path.  */
998
  if (check_counter (stmt, "interval", &count1, &all, gimple_bb (stmt)->count))
999
    {
1000
      gimple_remove_histogram_value (cfun, stmt, histogram);
1001
      return false;
1002
    }
1003
 
1004
  if (flag_profile_correction && count1 + count2 > all)
1005
      all = count1 + count2;
1006
 
1007
  gcc_assert (count1 + count2 <= all);
1008
 
1009
  /* We require that we use just subtractions in at least 50% of all
1010
     evaluations.  */
1011
  count = 0;
1012
  for (i = 0; i < histogram->hdata.intvl.steps; i++)
1013
    {
1014
      count += histogram->hvalue.counters[i];
1015
      if (count * 2 >= all)
1016
        break;
1017
    }
1018
  if (i == steps
1019
      || optimize_bb_for_size_p (gimple_bb (stmt)))
1020
    return false;
1021
 
1022
  gimple_remove_histogram_value (cfun, stmt, histogram);
1023
  if (dump_file)
1024
    {
1025
      fprintf (dump_file, "Mod subtract transformation on insn ");
1026
      print_gimple_stmt (dump_file, stmt, 0, TDF_SLIM);
1027
    }
1028
 
1029
  /* Compute probability of taking the optimal path(s).  */
1030
  if (all > 0)
1031
    {
1032
      prob1 = (count1 * REG_BR_PROB_BASE + all / 2) / all;
1033
      prob2 = (count2 * REG_BR_PROB_BASE + all / 2) / all;
1034
    }
1035
  else
1036
    {
1037
      prob1 = prob2 = 0;
1038
    }
1039
 
1040
  /* In practice, "steps" is always 2.  This interface reflects this,
1041
     and will need to be changed if "steps" can change.  */
1042
  result = gimple_mod_subtract (stmt, prob1, prob2, i, count1, count2, all);
1043
 
1044
  gimple_assign_set_rhs_from_tree (si, result);
1045
 
1046
  return true;
1047
}
1048
 
1049
static struct cgraph_node** pid_map = NULL;
1050
 
1051
/* Initialize map of pids (pid -> cgraph node) */
1052
 
1053
static void
1054
init_pid_map (void)
1055
{
1056
  struct cgraph_node *n;
1057
 
1058
  if (pid_map != NULL)
1059
    return;
1060
 
1061
  pid_map = XCNEWVEC (struct cgraph_node*, cgraph_max_pid);
1062
 
1063
  for (n = cgraph_nodes; n; n = n->next)
1064
    {
1065
      if (n->pid != -1)
1066
        pid_map [n->pid] = n;
1067
    }
1068
}
1069
 
1070
/* Return cgraph node for function with pid */
1071
 
1072
static inline struct cgraph_node*
1073
find_func_by_pid (int   pid)
1074
{
1075
  init_pid_map ();
1076
 
1077
  return pid_map [pid];
1078
}
1079
 
1080
/* Do transformation
1081
 
1082
  if (actual_callee_address == address_of_most_common_function/method)
1083
    do direct call
1084
  else
1085
    old call
1086
 */
1087
 
1088
static gimple
1089
gimple_ic (gimple icall_stmt, struct cgraph_node *direct_call,
1090
           int prob, gcov_type count, gcov_type all)
1091
{
1092
  gimple dcall_stmt, load_stmt, cond_stmt;
1093
  tree tmp1, tmpv, tmp;
1094
  basic_block cond_bb, dcall_bb, icall_bb, join_bb;
1095
  tree optype = build_pointer_type (void_type_node);
1096
  edge e_cd, e_ci, e_di, e_dj, e_ij;
1097
  gimple_stmt_iterator gsi;
1098
  int lp_nr;
1099
 
1100
  cond_bb = gimple_bb (icall_stmt);
1101
  gsi = gsi_for_stmt (icall_stmt);
1102
 
1103
  tmpv = create_tmp_var (optype, "PROF");
1104
  tmp1 = create_tmp_var (optype, "PROF");
1105
  tmp = unshare_expr (gimple_call_fn (icall_stmt));
1106
  load_stmt = gimple_build_assign (tmpv, tmp);
1107
  gsi_insert_before (&gsi, load_stmt, GSI_SAME_STMT);
1108
 
1109
  tmp = fold_convert (optype, build_addr (direct_call->decl,
1110
                                          current_function_decl));
1111
  load_stmt = gimple_build_assign (tmp1, tmp);
1112
  gsi_insert_before (&gsi, load_stmt, GSI_SAME_STMT);
1113
 
1114
  cond_stmt = gimple_build_cond (EQ_EXPR, tmp1, tmpv, NULL_TREE, NULL_TREE);
1115
  gsi_insert_before (&gsi, cond_stmt, GSI_SAME_STMT);
1116
 
1117
  dcall_stmt = gimple_copy (icall_stmt);
1118
  gimple_call_set_fndecl (dcall_stmt, direct_call->decl);
1119
  gsi_insert_before (&gsi, dcall_stmt, GSI_SAME_STMT);
1120
 
1121
  /* Fix CFG. */
1122
  /* Edge e_cd connects cond_bb to dcall_bb, etc; note the first letters. */
1123
  e_cd = split_block (cond_bb, cond_stmt);
1124
  dcall_bb = e_cd->dest;
1125
  dcall_bb->count = count;
1126
 
1127
  e_di = split_block (dcall_bb, dcall_stmt);
1128
  icall_bb = e_di->dest;
1129
  icall_bb->count = all - count;
1130
 
1131
  e_ij = split_block (icall_bb, icall_stmt);
1132
  join_bb = e_ij->dest;
1133
  join_bb->count = all;
1134
 
1135
  e_cd->flags = (e_cd->flags & ~EDGE_FALLTHRU) | EDGE_TRUE_VALUE;
1136
  e_cd->probability = prob;
1137
  e_cd->count = count;
1138
 
1139
  e_ci = make_edge (cond_bb, icall_bb, EDGE_FALSE_VALUE);
1140
  e_ci->probability = REG_BR_PROB_BASE - prob;
1141
  e_ci->count = all - count;
1142
 
1143
  remove_edge (e_di);
1144
 
1145
  e_dj = make_edge (dcall_bb, join_bb, EDGE_FALLTHRU);
1146
  e_dj->probability = REG_BR_PROB_BASE;
1147
  e_dj->count = count;
1148
 
1149
  e_ij->probability = REG_BR_PROB_BASE;
1150
  e_ij->count = all - count;
1151
 
1152
  /* Fix eh edges */
1153
  lp_nr = lookup_stmt_eh_lp (icall_stmt);
1154
  if (lp_nr != 0)
1155
    {
1156
      if (stmt_could_throw_p (dcall_stmt))
1157
        {
1158
          add_stmt_to_eh_lp (dcall_stmt, lp_nr);
1159
          make_eh_edges (dcall_stmt);
1160
        }
1161
 
1162
      gcc_assert (stmt_could_throw_p (icall_stmt));
1163
      make_eh_edges (icall_stmt);
1164
 
1165
      /* The old EH edges are sill on the join BB, purge them.  */
1166
      gimple_purge_dead_eh_edges (join_bb);
1167
    }
1168
 
1169
  return dcall_stmt;
1170
}
1171
 
1172
/*
1173
  For every checked indirect/virtual call determine if most common pid of
1174
  function/class method has probability more than 50%. If yes modify code of
1175
  this call to:
1176
 */
1177
 
1178
static bool
1179
gimple_ic_transform (gimple stmt)
1180
{
1181
  histogram_value histogram;
1182
  gcov_type val, count, all, bb_all;
1183
  gcov_type prob;
1184
  tree callee;
1185
  gimple modify;
1186
  struct cgraph_node *direct_call;
1187
 
1188
  if (gimple_code (stmt) != GIMPLE_CALL)
1189
    return false;
1190
 
1191
  callee = gimple_call_fn (stmt);
1192
 
1193
  if (TREE_CODE (callee) == FUNCTION_DECL)
1194
    return false;
1195
 
1196
  histogram = gimple_histogram_value_of_type (cfun, stmt, HIST_TYPE_INDIR_CALL);
1197
  if (!histogram)
1198
    return false;
1199
 
1200
  val = histogram->hvalue.counters [0];
1201
  count = histogram->hvalue.counters [1];
1202
  all = histogram->hvalue.counters [2];
1203
  gimple_remove_histogram_value (cfun, stmt, histogram);
1204
 
1205
  if (4 * count <= 3 * all)
1206
    return false;
1207
 
1208
  bb_all = gimple_bb (stmt)->count;
1209
  /* The order of CHECK_COUNTER calls is important -
1210
     since check_counter can correct the third parameter
1211
     and we want to make count <= all <= bb_all. */
1212
  if ( check_counter (stmt, "ic", &all, &bb_all, bb_all)
1213
      || check_counter (stmt, "ic", &count, &all, all))
1214
    return false;
1215
 
1216
  if (all > 0)
1217
    prob = (count * REG_BR_PROB_BASE + all / 2) / all;
1218
  else
1219
    prob = 0;
1220
  direct_call = find_func_by_pid ((int)val);
1221
 
1222
  if (direct_call == NULL)
1223
    return false;
1224
 
1225
  modify = gimple_ic (stmt, direct_call, prob, count, all);
1226
 
1227
  if (dump_file)
1228
    {
1229
      fprintf (dump_file, "Indirect call -> direct call ");
1230
      print_generic_expr (dump_file, gimple_call_fn (stmt), TDF_SLIM);
1231
      fprintf (dump_file, "=> ");
1232
      print_generic_expr (dump_file, direct_call->decl, TDF_SLIM);
1233
      fprintf (dump_file, " transformation on insn ");
1234
      print_gimple_stmt (dump_file, stmt, 0, TDF_SLIM);
1235
      fprintf (dump_file, " to ");
1236
      print_gimple_stmt (dump_file, modify, 0, TDF_SLIM);
1237
      fprintf (dump_file, "hist->count "HOST_WIDEST_INT_PRINT_DEC
1238
               " hist->all "HOST_WIDEST_INT_PRINT_DEC"\n", count, all);
1239
    }
1240
 
1241
  return true;
1242
}
1243
 
1244
/* Return true if the stringop CALL with FNDECL shall be profiled.
1245
   SIZE_ARG be set to the argument index for the size of the string
1246
   operation.
1247
*/
1248
static bool
1249
interesting_stringop_to_profile_p (tree fndecl, gimple call, int *size_arg)
1250
{
1251
  enum built_in_function fcode = DECL_FUNCTION_CODE (fndecl);
1252
 
1253
  if (fcode != BUILT_IN_MEMCPY && fcode != BUILT_IN_MEMPCPY
1254
      && fcode != BUILT_IN_MEMSET && fcode != BUILT_IN_BZERO)
1255
    return false;
1256
 
1257
  switch (fcode)
1258
    {
1259
     case BUILT_IN_MEMCPY:
1260
     case BUILT_IN_MEMPCPY:
1261
       *size_arg = 2;
1262
       return validate_gimple_arglist (call, POINTER_TYPE, POINTER_TYPE,
1263
                                       INTEGER_TYPE, VOID_TYPE);
1264
     case BUILT_IN_MEMSET:
1265
       *size_arg = 2;
1266
       return validate_gimple_arglist (call, POINTER_TYPE, INTEGER_TYPE,
1267
                                      INTEGER_TYPE, VOID_TYPE);
1268
     case BUILT_IN_BZERO:
1269
       *size_arg = 1;
1270
       return validate_gimple_arglist (call, POINTER_TYPE, INTEGER_TYPE,
1271
                                       VOID_TYPE);
1272
     default:
1273
       gcc_unreachable ();
1274
    }
1275
}
1276
 
1277
/* Convert   stringop (..., vcall_size)
1278
   into
1279
   if (vcall_size == icall_size)
1280
     stringop (..., icall_size);
1281
   else
1282
     stringop (..., vcall_size);
1283
   assuming we'll propagate a true constant into ICALL_SIZE later.  */
1284
 
1285
static void
1286
gimple_stringop_fixed_value (gimple vcall_stmt, tree icall_size, int prob,
1287
                             gcov_type count, gcov_type all)
1288
{
1289
  gimple tmp_stmt, cond_stmt, icall_stmt;
1290
  tree tmp1, tmpv, vcall_size, optype;
1291
  basic_block cond_bb, icall_bb, vcall_bb, join_bb;
1292
  edge e_ci, e_cv, e_iv, e_ij, e_vj;
1293
  gimple_stmt_iterator gsi;
1294
  tree fndecl;
1295
  int size_arg;
1296
 
1297
  fndecl = gimple_call_fndecl (vcall_stmt);
1298
  if (!interesting_stringop_to_profile_p (fndecl, vcall_stmt, &size_arg))
1299
    gcc_unreachable();
1300
 
1301
  cond_bb = gimple_bb (vcall_stmt);
1302
  gsi = gsi_for_stmt (vcall_stmt);
1303
 
1304
  vcall_size = gimple_call_arg (vcall_stmt, size_arg);
1305
  optype = TREE_TYPE (vcall_size);
1306
 
1307
  tmpv = create_tmp_var (optype, "PROF");
1308
  tmp1 = create_tmp_var (optype, "PROF");
1309
  tmp_stmt = gimple_build_assign (tmpv, fold_convert (optype, icall_size));
1310
  gsi_insert_before (&gsi, tmp_stmt, GSI_SAME_STMT);
1311
 
1312
  tmp_stmt = gimple_build_assign (tmp1, vcall_size);
1313
  gsi_insert_before (&gsi, tmp_stmt, GSI_SAME_STMT);
1314
 
1315
  cond_stmt = gimple_build_cond (EQ_EXPR, tmp1, tmpv, NULL_TREE, NULL_TREE);
1316
  gsi_insert_before (&gsi, cond_stmt, GSI_SAME_STMT);
1317
 
1318
  icall_stmt = gimple_copy (vcall_stmt);
1319
  gimple_call_set_arg (icall_stmt, size_arg, icall_size);
1320
  gsi_insert_before (&gsi, icall_stmt, GSI_SAME_STMT);
1321
 
1322
  /* Fix CFG. */
1323
  /* Edge e_ci connects cond_bb to icall_bb, etc. */
1324
  e_ci = split_block (cond_bb, cond_stmt);
1325
  icall_bb = e_ci->dest;
1326
  icall_bb->count = count;
1327
 
1328
  e_iv = split_block (icall_bb, icall_stmt);
1329
  vcall_bb = e_iv->dest;
1330
  vcall_bb->count = all - count;
1331
 
1332
  e_vj = split_block (vcall_bb, vcall_stmt);
1333
  join_bb = e_vj->dest;
1334
  join_bb->count = all;
1335
 
1336
  e_ci->flags = (e_ci->flags & ~EDGE_FALLTHRU) | EDGE_TRUE_VALUE;
1337
  e_ci->probability = prob;
1338
  e_ci->count = count;
1339
 
1340
  e_cv = make_edge (cond_bb, vcall_bb, EDGE_FALSE_VALUE);
1341
  e_cv->probability = REG_BR_PROB_BASE - prob;
1342
  e_cv->count = all - count;
1343
 
1344
  remove_edge (e_iv);
1345
 
1346
  e_ij = make_edge (icall_bb, join_bb, EDGE_FALLTHRU);
1347
  e_ij->probability = REG_BR_PROB_BASE;
1348
  e_ij->count = count;
1349
 
1350
  e_vj->probability = REG_BR_PROB_BASE;
1351
  e_vj->count = all - count;
1352
 
1353
  /* Because these are all string op builtins, they're all nothrow.  */
1354
  gcc_assert (!stmt_could_throw_p (vcall_stmt));
1355
  gcc_assert (!stmt_could_throw_p (icall_stmt));
1356
}
1357
 
1358
/* Find values inside STMT for that we want to measure histograms for
1359
   division/modulo optimization.  */
1360
static bool
1361
gimple_stringops_transform (gimple_stmt_iterator *gsi)
1362
{
1363
  gimple stmt = gsi_stmt (*gsi);
1364
  tree fndecl;
1365
  tree blck_size;
1366
  enum built_in_function fcode;
1367
  histogram_value histogram;
1368
  gcov_type count, all, val;
1369
  tree dest, src;
1370
  unsigned int dest_align, src_align;
1371
  gcov_type prob;
1372
  tree tree_val;
1373
  int size_arg;
1374
 
1375
  if (gimple_code (stmt) != GIMPLE_CALL)
1376
    return false;
1377
  fndecl = gimple_call_fndecl (stmt);
1378
  if (!fndecl)
1379
    return false;
1380
  fcode = DECL_FUNCTION_CODE (fndecl);
1381
  if (!interesting_stringop_to_profile_p (fndecl, stmt, &size_arg))
1382
    return false;
1383
 
1384
  blck_size = gimple_call_arg (stmt, size_arg);
1385
  if (TREE_CODE (blck_size) == INTEGER_CST)
1386
    return false;
1387
 
1388
  histogram = gimple_histogram_value_of_type (cfun, stmt, HIST_TYPE_SINGLE_VALUE);
1389
  if (!histogram)
1390
    return false;
1391
  val = histogram->hvalue.counters[0];
1392
  count = histogram->hvalue.counters[1];
1393
  all = histogram->hvalue.counters[2];
1394
  gimple_remove_histogram_value (cfun, stmt, histogram);
1395
  /* We require that count is at least half of all; this means
1396
     that for the transformation to fire the value must be constant
1397
     at least 80% of time.  */
1398
  if ((6 * count / 5) < all || optimize_bb_for_size_p (gimple_bb (stmt)))
1399
    return false;
1400
  if (check_counter (stmt, "value", &count, &all, gimple_bb (stmt)->count))
1401
    return false;
1402
  if (all > 0)
1403
    prob = (count * REG_BR_PROB_BASE + all / 2) / all;
1404
  else
1405
    prob = 0;
1406
  dest = gimple_call_arg (stmt, 0);
1407
  dest_align = get_pointer_alignment (dest, BIGGEST_ALIGNMENT);
1408
  switch (fcode)
1409
    {
1410
    case BUILT_IN_MEMCPY:
1411
    case BUILT_IN_MEMPCPY:
1412
      src = gimple_call_arg (stmt, 1);
1413
      src_align = get_pointer_alignment (src, BIGGEST_ALIGNMENT);
1414
      if (!can_move_by_pieces (val, MIN (dest_align, src_align)))
1415
        return false;
1416
      break;
1417
    case BUILT_IN_MEMSET:
1418
      if (!can_store_by_pieces (val, builtin_memset_read_str,
1419
                                gimple_call_arg (stmt, 1),
1420
                                dest_align, true))
1421
        return false;
1422
      break;
1423
    case BUILT_IN_BZERO:
1424
      if (!can_store_by_pieces (val, builtin_memset_read_str,
1425
                                integer_zero_node,
1426
                                dest_align, true))
1427
        return false;
1428
      break;
1429
    default:
1430
      gcc_unreachable ();
1431
    }
1432
  tree_val = build_int_cst_wide (get_gcov_type (),
1433
                                 (unsigned HOST_WIDE_INT) val,
1434
                                 val >> (HOST_BITS_PER_WIDE_INT - 1) >> 1);
1435
  if (dump_file)
1436
    {
1437
      fprintf (dump_file, "Single value %i stringop transformation on ",
1438
               (int)val);
1439
      print_gimple_stmt (dump_file, stmt, 0, TDF_SLIM);
1440
    }
1441
  gimple_stringop_fixed_value (stmt, tree_val, prob, count, all);
1442
 
1443
  return true;
1444
}
1445
 
1446
void
1447
stringop_block_profile (gimple stmt, unsigned int *expected_align,
1448
                        HOST_WIDE_INT *expected_size)
1449
{
1450
  histogram_value histogram;
1451
  histogram = gimple_histogram_value_of_type (cfun, stmt, HIST_TYPE_AVERAGE);
1452
  if (!histogram)
1453
    *expected_size = -1;
1454
  else if (!histogram->hvalue.counters[1])
1455
    {
1456
      *expected_size = -1;
1457
      gimple_remove_histogram_value (cfun, stmt, histogram);
1458
    }
1459
  else
1460
    {
1461
      gcov_type size;
1462
      size = ((histogram->hvalue.counters[0]
1463
              + histogram->hvalue.counters[1] / 2)
1464
               / histogram->hvalue.counters[1]);
1465
      /* Even if we can hold bigger value in SIZE, INT_MAX
1466
         is safe "infinity" for code generation strategies.  */
1467
      if (size > INT_MAX)
1468
        size = INT_MAX;
1469
      *expected_size = size;
1470
      gimple_remove_histogram_value (cfun, stmt, histogram);
1471
    }
1472
  histogram = gimple_histogram_value_of_type (cfun, stmt, HIST_TYPE_IOR);
1473
  if (!histogram)
1474
    *expected_align = 0;
1475
  else if (!histogram->hvalue.counters[0])
1476
    {
1477
      gimple_remove_histogram_value (cfun, stmt, histogram);
1478
      *expected_align = 0;
1479
    }
1480
  else
1481
    {
1482
      gcov_type count;
1483
      int alignment;
1484
 
1485
      count = histogram->hvalue.counters[0];
1486
      alignment = 1;
1487
      while (!(count & alignment)
1488
             && (alignment * 2 * BITS_PER_UNIT))
1489
        alignment <<= 1;
1490
      *expected_align = alignment * BITS_PER_UNIT;
1491
      gimple_remove_histogram_value (cfun, stmt, histogram);
1492
    }
1493
}
1494
 
1495
struct value_prof_hooks {
1496
  /* Find list of values for which we want to measure histograms.  */
1497
  void (*find_values_to_profile) (histogram_values *);
1498
 
1499
  /* Identify and exploit properties of values that are hard to analyze
1500
     statically.  See value-prof.c for more detail.  */
1501
  bool (*value_profile_transformations) (void);
1502
};
1503
 
1504
/* Find values inside STMT for that we want to measure histograms for
1505
   division/modulo optimization.  */
1506
static void
1507
gimple_divmod_values_to_profile (gimple stmt, histogram_values *values)
1508
{
1509
  tree lhs, divisor, op0, type;
1510
  histogram_value hist;
1511
 
1512
  if (gimple_code (stmt) != GIMPLE_ASSIGN)
1513
    return;
1514
 
1515
  lhs = gimple_assign_lhs (stmt);
1516
  type = TREE_TYPE (lhs);
1517
  if (!INTEGRAL_TYPE_P (type))
1518
    return;
1519
 
1520
  switch (gimple_assign_rhs_code (stmt))
1521
    {
1522
    case TRUNC_DIV_EXPR:
1523
    case TRUNC_MOD_EXPR:
1524
      divisor = gimple_assign_rhs2 (stmt);
1525
      op0 = gimple_assign_rhs1 (stmt);
1526
 
1527
      VEC_reserve (histogram_value, heap, *values, 3);
1528
 
1529
      if (is_gimple_reg (divisor))
1530
        /* Check for the case where the divisor is the same value most
1531
           of the time.  */
1532
        VEC_quick_push (histogram_value, *values,
1533
                        gimple_alloc_histogram_value (cfun,
1534
                                                      HIST_TYPE_SINGLE_VALUE,
1535
                                                      stmt, divisor));
1536
 
1537
      /* For mod, check whether it is not often a noop (or replaceable by
1538
         a few subtractions).  */
1539
      if (gimple_assign_rhs_code (stmt) == TRUNC_MOD_EXPR
1540
          && TYPE_UNSIGNED (type))
1541
        {
1542
          tree val;
1543
          /* Check for a special case where the divisor is power of 2.  */
1544
          VEC_quick_push (histogram_value, *values,
1545
                          gimple_alloc_histogram_value (cfun, HIST_TYPE_POW2,
1546
                                                        stmt, divisor));
1547
 
1548
          val = build2 (TRUNC_DIV_EXPR, type, op0, divisor);
1549
          hist = gimple_alloc_histogram_value (cfun, HIST_TYPE_INTERVAL,
1550
                                               stmt, val);
1551
          hist->hdata.intvl.int_start = 0;
1552
          hist->hdata.intvl.steps = 2;
1553
          VEC_quick_push (histogram_value, *values, hist);
1554
        }
1555
      return;
1556
 
1557
    default:
1558
      return;
1559
    }
1560
}
1561
 
1562
/* Find calls inside STMT for that we want to measure histograms for
1563
   indirect/virtual call optimization. */
1564
 
1565
static void
1566
gimple_indirect_call_to_profile (gimple stmt, histogram_values *values)
1567
{
1568
  tree callee;
1569
 
1570
  if (gimple_code (stmt) != GIMPLE_CALL
1571
      || gimple_call_fndecl (stmt) != NULL_TREE)
1572
    return;
1573
 
1574
  callee = gimple_call_fn (stmt);
1575
 
1576
  VEC_reserve (histogram_value, heap, *values, 3);
1577
 
1578
  VEC_quick_push (histogram_value, *values,
1579
                  gimple_alloc_histogram_value (cfun, HIST_TYPE_INDIR_CALL,
1580
                                                stmt, callee));
1581
 
1582
  return;
1583
}
1584
 
1585
/* Find values inside STMT for that we want to measure histograms for
1586
   string operations.  */
1587
static void
1588
gimple_stringops_values_to_profile (gimple stmt, histogram_values *values)
1589
{
1590
  tree fndecl;
1591
  tree blck_size;
1592
  tree dest;
1593
  int size_arg;
1594
 
1595
  if (gimple_code (stmt) != GIMPLE_CALL)
1596
    return;
1597
  fndecl = gimple_call_fndecl (stmt);
1598
  if (!fndecl)
1599
    return;
1600
 
1601
  if (!interesting_stringop_to_profile_p (fndecl, stmt, &size_arg))
1602
    return;
1603
 
1604
  dest = gimple_call_arg (stmt, 0);
1605
  blck_size = gimple_call_arg (stmt, size_arg);
1606
 
1607
  if (TREE_CODE (blck_size) != INTEGER_CST)
1608
    {
1609
      VEC_safe_push (histogram_value, heap, *values,
1610
                     gimple_alloc_histogram_value (cfun, HIST_TYPE_SINGLE_VALUE,
1611
                                                   stmt, blck_size));
1612
      VEC_safe_push (histogram_value, heap, *values,
1613
                     gimple_alloc_histogram_value (cfun, HIST_TYPE_AVERAGE,
1614
                                                   stmt, blck_size));
1615
    }
1616
  if (TREE_CODE (blck_size) != INTEGER_CST)
1617
    VEC_safe_push (histogram_value, heap, *values,
1618
                   gimple_alloc_histogram_value (cfun, HIST_TYPE_IOR,
1619
                                                 stmt, dest));
1620
}
1621
 
1622
/* Find values inside STMT for that we want to measure histograms and adds
1623
   them to list VALUES.  */
1624
 
1625
static void
1626
gimple_values_to_profile (gimple stmt, histogram_values *values)
1627
{
1628
  if (flag_value_profile_transformations)
1629
    {
1630
      gimple_divmod_values_to_profile (stmt, values);
1631
      gimple_stringops_values_to_profile (stmt, values);
1632
      gimple_indirect_call_to_profile (stmt, values);
1633
    }
1634
}
1635
 
1636
static void
1637
gimple_find_values_to_profile (histogram_values *values)
1638
{
1639
  basic_block bb;
1640
  gimple_stmt_iterator gsi;
1641
  unsigned i;
1642
  histogram_value hist = NULL;
1643
 
1644
  *values = NULL;
1645
  FOR_EACH_BB (bb)
1646
    for (gsi = gsi_start_bb (bb); !gsi_end_p (gsi); gsi_next (&gsi))
1647
      gimple_values_to_profile (gsi_stmt (gsi), values);
1648
 
1649
  for (i = 0; VEC_iterate (histogram_value, *values, i, hist); i++)
1650
    {
1651
      switch (hist->type)
1652
        {
1653
        case HIST_TYPE_INTERVAL:
1654
          hist->n_counters = hist->hdata.intvl.steps + 2;
1655
          break;
1656
 
1657
        case HIST_TYPE_POW2:
1658
          hist->n_counters = 2;
1659
          break;
1660
 
1661
        case HIST_TYPE_SINGLE_VALUE:
1662
          hist->n_counters = 3;
1663
          break;
1664
 
1665
        case HIST_TYPE_CONST_DELTA:
1666
          hist->n_counters = 4;
1667
          break;
1668
 
1669
        case HIST_TYPE_INDIR_CALL:
1670
          hist->n_counters = 3;
1671
          break;
1672
 
1673
        case HIST_TYPE_AVERAGE:
1674
          hist->n_counters = 2;
1675
          break;
1676
 
1677
        case HIST_TYPE_IOR:
1678
          hist->n_counters = 1;
1679
          break;
1680
 
1681
        default:
1682
          gcc_unreachable ();
1683
        }
1684
      if (dump_file)
1685
        {
1686
          fprintf (dump_file, "Stmt ");
1687
          print_gimple_stmt (dump_file, hist->hvalue.stmt, 0, TDF_SLIM);
1688
          dump_histogram_value (dump_file, hist);
1689
        }
1690
    }
1691
}
1692
 
1693
static struct value_prof_hooks gimple_value_prof_hooks = {
1694
  gimple_find_values_to_profile,
1695
  gimple_value_profile_transformations
1696
};
1697
 
1698
void
1699
gimple_register_value_prof_hooks (void)
1700
{
1701
  gcc_assert (current_ir_type () == IR_GIMPLE);
1702
  value_prof_hooks = &gimple_value_prof_hooks;
1703
}
1704
 
1705
/* IR-independent entry points.  */
1706
void
1707
find_values_to_profile (histogram_values *values)
1708
{
1709
  (value_prof_hooks->find_values_to_profile) (values);
1710
}
1711
 
1712
bool
1713
value_profile_transformations (void)
1714
{
1715
  return (value_prof_hooks->value_profile_transformations) ();
1716
}
1717
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.