Subversion Repositories openrisc_me

# Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,

# 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008

# Free Software Foundation, Inc.

# This file is part of GDB.

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 2 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program; if not, write to the Free Software

# Foundation, Inc., 51 Franklin Street, Fifth Floor,

# Boston, MA 02110-1301, USA.

prefix = @prefix@

exec_prefix = @exec_prefix@

host_alias = @host_alias@

target_alias = @target_alias@

program_transform_name = @program_transform_name@

bindir = @bindir@

libdir = @libdir@

tooldir = $(libdir)/$(target_alias)

datadir = @datadir@

localedir = @localedir@

mandir = @mandir@

man1dir = $(mandir)/man1

man2dir = $(mandir)/man2

man3dir = $(mandir)/man3

man4dir = $(mandir)/man4

man5dir = $(mandir)/man5

man6dir = $(mandir)/man6

man7dir = $(mandir)/man7

man8dir = $(mandir)/man8

man9dir = $(mandir)/man9

infodir = @infodir@

pdfdir = $(prefix)/share/doc/gdb

htmldir = $(prefix)/html

includedir = @includedir@

# This can be referenced by `LIBINTL' as computed by

# ZW_GNU_GETTEXT_SISTER_DIR.

top_builddir = .

SHELL = @SHELL@

EXEEXT = @EXEEXT@

AWK = @AWK@

LN_S = @LN_S@

INSTALL = @INSTALL@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_DATA = @INSTALL_DATA@

DESTDIR =

AR = @AR@

AR_FLAGS = qv

RANLIB = @RANLIB@

DLLTOOL = @DLLTOOL@

WINDRES = @WINDRES@

MIG = @MIG@

XGETTEXT = @XGETTEXT@

GMSGFMT = @GMSGFMT@

MSGMERGE = msgmerge

PACKAGE = @PACKAGE@

CATALOGS = @CATALOGS@

# If you are compiling with GCC, make sure that either 1) You have the

# fixed include files where GCC can reach them, or 2) You use the

# -traditional flag.  Otherwise the ioctl calls in inflow.c

# will be incorrectly compiled.  The "fixincludes" script in the gcc

# distribution will fix your include files up.

CC=@CC@

# Directory containing source files.

srcdir = @srcdir@

VPATH = @srcdir@

YACC=@YACC@

# This is used to rebuild ada-lex.c from ada-lex.l.  If the program is

# not defined, but ada-lex.c is present, compilation will continue,

# possibly with a warning.

FLEX = flex

YLWRAP = $(srcdir)/../ylwrap

# where to find makeinfo, preferably one designed for texinfo-2

MAKEINFO=makeinfo

# Contrary to documentation, the current directory is not

# searched by texi2html, so specify it explicitly.

# -macro 2007-07-26

MAKEHTML = texi2html

MAKEHTMLFLAGS = -menu -split_chapter -I .

# Set this up with gcc if you have gnu ld and the loader will print out

# line numbers for undefined references.

#CC_LD=gcc -static

CC_LD=$(CC)

# Where is our "include" directory?  Typically $(srcdir)/../include.

# This is essentially the header file directory for the library

# routines in libiberty.

INCLUDE_DIR =  $(srcdir)/../include

INCLUDE_CFLAGS = -I$(INCLUDE_DIR)

# Where is the "-liberty" library?  Typically in ../libiberty.

LIBIBERTY = ../libiberty/libiberty.a

# Where is the BFD library?  Typically in ../bfd.

BFD_DIR = ../bfd

BFD = $(BFD_DIR)/libbfd.a

BFD_SRC = $(srcdir)/$(BFD_DIR)

BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)

# Where is the decnumber library?  Typically in ../libdecnumber.

LIBDECNUMBER_DIR = ../libdecnumber

LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a

LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)

LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)

# Where is the READLINE library?  Typically in ../readline.

READLINE_DIR = ../readline

READLINE_SRC = $(srcdir)/$(READLINE_DIR)

READLINE = @READLINE@

READLINE_DEPS = @READLINE_DEPS@

READLINE_CFLAGS = @READLINE_CFLAGS@

# Where is expat?  This will be empty if expat was not available.

LIBEXPAT = @LIBEXPAT@

WARN_CFLAGS = @WARN_CFLAGS@

WERROR_CFLAGS = @WERROR_CFLAGS@

GDB_WARN_CFLAGS = $(WARN_CFLAGS)

GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)

GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " | sed "s/ -Wformat-nonliteral / /g"`

# Where is the INTL library?  Typically in ../intl.

INTL = @LIBINTL@

INTL_DEPS = @LIBINTL_DEP@

INTL_CFLAGS = @INCINTL@

# Where is the ICONV library?  This can be empty if libc has iconv.

LIBICONV = @LIBICONV@

# Did the user give us a --with-sysroot option?

TARGET_SYSTEM_ROOT = @TARGET_SYSTEM_ROOT@

TARGET_SYSTEM_ROOT_DEFINE = @TARGET_SYSTEM_ROOT_DEFINE@

#

# CLI sub directory definitons

#

SUBDIR_CLI_OBS = \

        cli-dump.o \

        cli-decode.o cli-script.o cli-cmds.o cli-setshow.o cli-utils.o \

        cli-logging.o \

        cli-interp.o

SUBDIR_CLI_SRCS = \

        cli/cli-dump.c \

        cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \

        cli/cli-logging.c \

        cli/cli-interp.c \

        cli/cli-utils.c

SUBDIR_CLI_DEPS =

SUBDIR_CLI_LDFLAGS=

SUBDIR_CLI_CFLAGS=

#

# MI sub directory definitons

#

SUBDIR_MI_OBS = \

        mi-out.o mi-console.o \

        mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \

        mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \

        mi-interp.o \

        mi-main.o mi-parse.o mi-getopt.o mi-common.o

SUBDIR_MI_SRCS = \

        mi/mi-out.c mi/mi-console.c \

        mi/mi-cmds.c mi/mi-cmd-env.c \

        mi/mi-cmd-var.c mi/mi-cmd-break.c mi/mi-cmd-stack.c \

        mi/mi-cmd-file.c mi/mi-cmd-disas.c mi/mi-symbol-cmds.c \

        mi/mi-cmd-target.c mi/mi-interp.c \

        mi/mi-main.c mi/mi-parse.c mi/mi-getopt.c mi/mi-common.c

SUBDIR_MI_DEPS =

SUBDIR_MI_LDFLAGS=

SUBDIR_MI_CFLAGS= \

        -DMI_OUT=1

#

# TUI sub directory definitions

#

# Name of the TUI program

TUI=gdbtui

SUBDIR_TUI_OBS = \

        tui-command.o \

        tui-data.o \

        tui-disasm.o \

        tui-file.o tui.o \

        tui-hooks.o \

        tui-interp.o \

        tui-io.o \

        tui-layout.o \

        tui-out.o \

        tui-regs.o \

        tui-source.o \

        tui-stack.o \

        tui-win.o \

        tui-windata.o \

        tui-wingeneral.o \

        tui-winsource.o

SUBDIR_TUI_SRCS = \

        tui/tui-command.c \

        tui/tui-data.c \

        tui/tui-disasm.c \

        tui/tui-file.c \

        tui/tui-hooks.c \

        tui/tui-interp.c \

        tui/tui-io.c \

        tui/tui-layout.c \

        tui/tui-out.c \

        tui/tui-regs.c \

        tui/tui-source.c \

        tui/tui-stack.c \

        tui/tui-win.c \

        tui/tui-windata.c \

        tui/tui-wingeneral.c \

        tui/tui-winsource.c \

        tui/tui.c

SUBDIR_TUI_DEPS =

SUBDIR_TUI_LDFLAGS=

SUBDIR_TUI_CFLAGS= \

        -DTUI=1

# Opcodes currently live in one of two places.  Either they are in the

# opcode library, typically ../opcodes, or they are in a header file

# in INCLUDE_DIR.

# Where is the "-lopcodes" library, with (some of) the opcode tables and

# disassemblers?

OPCODES_DIR = ../opcodes

OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)

OPCODES = $(OPCODES_DIR)/libopcodes.a

# Where are the other opcode tables which only have header file

# versions?

OP_INCLUDE = $(INCLUDE_DIR)/opcode

OPCODES_CFLAGS = -I$(OP_INCLUDE)

# The simulator is usually nonexistent; targets that include one

# should set this to list all the .o or .a files to be linked in.

SIM = @SIM@

WIN32LIBS = @WIN32LIBS@

# Where is the TCL library?  Typically in ../tcl.

LIB_INSTALL_DIR = $(libdir)

# This variable is needed when doing dynamic linking.

LIB_RUNTIME_DIR = $(libdir)

TCL = @TCL_CC_SEARCH_FLAGS@ @TCL_BUILD_LIB_SPEC@

TCL_CFLAGS = @TCLHDIR@

GDBTKLIBS = @GDBTKLIBS@

# Extra flags that the GDBTK files need:

GDBTK_CFLAGS = @GDBTK_CFLAGS@

# Where is the TK library?  Typically in ../tk.

TK = @TK_BUILD_LIB_SPEC@

TK_CFLAGS = @TKHDIR@ @TK_BUILD_INCLUDES@

# Where is Itcl?  Typically in ../itcl/itcl.

ITCL_CFLAGS = @ITCLHDIR@

ITCL = @ITCLLIB@

# Where is Itk?  Typically in ../itcl/itk.

ITK_CFLAGS = @ITKHDIR@

ITK = @ITKLIB@

X11_CFLAGS = @TK_XINCLUDES@

X11_LDFLAGS =

X11_LIBS =

WIN32LDAPP = @WIN32LDAPP@

LIBGUI = @LIBGUI@

GUI_CFLAGS_X = @GUI_CFLAGS_X@

IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)

# The version of gdbtk we're building. This should be kept

# in sync with GDBTK_VERSION and friends in gdbtk.h.

GDBTK_VERSION = 1.0

GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)

# Gdbtk requires an absolute path to the source directory or

# the testsuite won't run properly.

GDBTK_SRC_DIR = @GDBTK_SRC_DIR@

SUBDIR_GDBTK_OBS = \

        gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \

        gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o

SUBDIR_GDBTK_SRCS = \

        gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-bp.c \

        gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c \

        gdbtk/generic/gdbtk-interp.c \

        gdbtk/generic/gdbtk-register.c gdbtk/generic/gdbtk-stack.c \

        gdbtk/generic/gdbtk-varobj.c gdbtk/generic/gdbtk-wrapper.c \

        gdbtk/generic/gdbtk-main.c

SUBDIR_GDBTK_DEPS = \

        $(LIBGUI) $(ITCL_DEPS) $(ITK_DEPS) $(TK_DEPS) $(TCL_DEPS)

SUBDIR_GDBTK_LDFLAGS=

SUBDIR_GDBTK_CFLAGS= -DGDBTK

CONFIG_OBS= @CONFIG_OBS@

CONFIG_SRCS= @CONFIG_SRCS@

CONFIG_DEPS= @CONFIG_DEPS@

CONFIG_LDFLAGS = @CONFIG_LDFLAGS@

ENABLE_CFLAGS= @ENABLE_CFLAGS@

CONFIG_ALL= @CONFIG_ALL@

CONFIG_CLEAN= @CONFIG_CLEAN@

CONFIG_INSTALL = @CONFIG_INSTALL@

CONFIG_UNINSTALL = @CONFIG_UNINSTALL@

# -I. for config files.

# -I$(srcdir) for gdb internal headers.

# -I$(srcdir)/config for more generic config files.

# It is also possible that you will need to add -I/usr/include/sys if

# your system doesn't have fcntl.h in /usr/include (which is where it

# should be according to Posix).

DEFS = @DEFS@

GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/config -DLOCALEDIR="\"$(localedir)\"" $(DEFS)

# MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.

GLOBAL_CFLAGS = $(MH_CFLAGS)

PROFILE_CFLAGS = @PROFILE_CFLAGS@

# CFLAGS is specifically reserved for setting from the command line

# when running make.  I.E.  "make CFLAGS=-Wmissing-prototypes".

CFLAGS = @CFLAGS@

# Set by configure, for e.g. expat.

INTERNAL_CPPFLAGS = @CPPFLAGS@

# Need to pass this to testsuite for "make check".  Probably should be

# consistent with top-level Makefile.in and gdb/testsuite/Makefile.in

# so "make check" has the same result no matter where it is run.

CXXFLAGS = -g -O

# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.

INTERNAL_CFLAGS_BASE = \

        $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \

        $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \

        $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \

        $(INTL_CFLAGS) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)

INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)

INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)

# LDFLAGS is specifically reserved for setting from the command line

# when running make.

LDFLAGS = @LDFLAGS@

# Profiling options need to go here to work.

# I think it's perfectly reasonable for a user to set -pg in CFLAGS

# and have it work; that's why CFLAGS is here.

# PROFILE_CFLAGS is _not_ included, however, because we use monstartup.

INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_LDFLAGS)

# If your system is missing alloca(), or, more likely, it's there but

# it doesn't work, then refer to libiberty.

# Libraries and corresponding dependencies for compiling gdb.

# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.

# LIBIBERTY appears twice on purpose.

# If you have the Cygnus libraries installed,

# you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='

INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty -ldecnumber \

        $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \

        -lintl -liberty

CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \

        $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \

        $(LIBICONV) $(LIBEXPAT) \

        $(LIBIBERTY) $(WIN32LIBS)

CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \

        $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS)

ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)

ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)

DIST=gdb

LINT=/usr/5bin/lint

LINTFLAGS= $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \

        $(BFD_CFLAGS) $(INCLUDE_CFLAGS) \

        $(INTL_CFLAGS)

RUNTEST = runtest

RUNTESTFLAGS=

# XML files to build in to GDB.

XMLFILES = $(srcdir)/features/gdb-target.dtd $(srcdir)/features/xinclude.dtd \

        $(srcdir)/features/library-list.dtd

# This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX

# interface to the serial port.  Hopefully if get ported to OS/2, VMS,

# etc., then there will be (as part of the C library or perhaps as

# part of libiberty) a POSIX interface.  But at least for now the

# host-dependent makefile fragment might need to use something else

# besides ser-unix.o

SER_HARDWIRE = @SER_HARDWIRE@

# The `remote' debugging target is supported for most architectures,

# but not all (e.g. 960)

REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o

# This is remote-sim.o if a simulator is to be linked in.

SIM_OBS = @SIM_OBS@

# Target-dependent object files.

TARGET_OBS = @TARGET_OBS@

# All target-dependent objects files that require 64-bit CORE_ADDR

# (used with --enable-targets=all --enable-64-bit-bfd).

ALL_64_TARGET_OBS = \

        alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \

        alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \

        amd64fbsd-tdep.o amd64-linux-tdep.o amd64nbsd-tdep.o amd64obsd-tdep.o \

        amd64-sol2-tdep.o amd64-tdep.o \

        ia64-linux-tdep.o ia64-tdep.o \

        mips64obsd-tdep.o \

        sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \

        sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o

# All other target-dependent objects files (used with --enable-targets=all).

ALL_TARGET_OBS = \

        armbsd-tdep.o arm-linux-tdep.o armnbsd-tdep.o armobsd-tdep.o \

        arm-tdep.o arm-wince-tdep.o \

        avr-tdep.o \

        cris-tdep.o \

        frv-linux-tdep.o frv-tdep.o \

        h8300-tdep.o \

        hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \

        hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \

        i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \

        i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \

        i386-sol2-tdep.o i386-tdep.o i387-tdep.o \

        iq2000-tdep.o \

        m32c-tdep.o \

        m32r-linux-tdep.o m32r-tdep.o \

        m68hc11-tdep.o \

        m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \

        m88k-tdep.o \

        mep-tdep.o \

        mips-irix-tdep.o mips-linux-tdep.o \

        mipsnbsd-tdep.o mips-tdep.o \

        mn10300-linux-tdep.o mn10300-tdep.o \

        mt-tdep.o \

        nto-tdep.o \

        ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \

        rs6000-aix-tdep.o rs6000-tdep.o \

        s390-tdep.o \

        score-tdep.o \

        sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \

        sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \

        sparc-sol2-tdep.o sparc-tdep.o \

        spu-tdep.o \

        v850-tdep.o \

        vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \

        xstormy16-tdep.o \

        xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \

        glibc-tdep.o \

        bsd-uthread.o \

        nbsd-tdep.o obsd-tdep.o \

        sol2-tdep.o \

        solib.o solib-frv.o solib-irix.o solib-svr4.o solib-target.o \

        solib-som.o solib-pa64.o \

        dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \

        remote-m32r-sdi.o \

        xcoffread.o \

        prologue-value.o \

        symfile-mem.o \

        corelow.o

# Host-dependent makefile fragment comes in here.

@host_makefile_frag@

# End of host-dependent makefile fragment

FLAGS_TO_PASS = \

        "prefix=$(prefix)" \

        "exec_prefix=$(exec_prefix)" \

        "infodir=$(infodir)" \

        "pdfdir=$(pdfdir)" \

        "libdir=$(libdir)" \

        "mandir=$(mandir)" \

        "datadir=$(datadir)" \

        "includedir=$(includedir)" \

        "against=$(against)" \

        "DESTDIR=$(DESTDIR)" \

        "AR=$(AR)" \

        "AR_FLAGS=$(AR_FLAGS)" \

        "CC=$(CC)" \

        "CFLAGS=$(CFLAGS)" \

        "CXX=$(CXX)" \

        "CXXFLAGS=$(CXXFLAGS)" \

        "DLLTOOL=$(DLLTOOL)" \

        "LDFLAGS=$(LDFLAGS)" \

        "RANLIB=$(RANLIB)" \

        "MAKEINFO=$(MAKEINFO)" \

        "MAKEHTML=$(MAKEHTML)" \

        "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \

        "INSTALL=$(INSTALL)" \

        "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \

        "INSTALL_DATA=$(INSTALL_DATA)" \

        "RUNTEST=$(RUNTEST)" \

        "RUNTESTFLAGS=$(RUNTESTFLAGS)"

# Flags that we pass when building the testsuite.

# empty for native, $(target_alias)/ for cross

target_subdir = @target_subdir@

CC_FOR_TARGET = ` \

  if [ -f $${rootme}/../gcc/xgcc ] ; then \

    if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \

      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \

    else \

      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \

    fi; \

  else \

    if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \

      echo $(CC); \

    else \

      t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \

    fi; \

  fi`

CXX = gcc

CXX_FOR_TARGET = ` \

  if [ -f $${rootme}/../gcc/xgcc ] ; then \

    if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \

      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \

    else \

      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \

    fi; \

  else \

    if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \

      echo $(CXX); \

    else \

      t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \

    fi; \

  fi`

# The use of $$(x_FOR_TARGET) reduces the command line length by not

# duplicating the lengthy definition.

TARGET_FLAGS_TO_PASS = \

        "prefix=$(prefix)" \

        "exec_prefix=$(exec_prefix)" \

        "against=$(against)" \

        'CC=$$(CC_FOR_TARGET)' \

        "CC_FOR_TARGET=$(CC_FOR_TARGET)" \

        "CFLAGS=$(CFLAGS)" \

        'CXX=$$(CXX_FOR_TARGET)' \

        "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \

        "CXXFLAGS=$(CXXFLAGS)" \

        "INSTALL=$(INSTALL)" \

        "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \

        "INSTALL_DATA=$(INSTALL_DATA)" \

        "MAKEINFO=$(MAKEINFO)" \

        "MAKEHTML=$(MAKEHTML)" \

        "RUNTEST=$(RUNTEST)" \

        "RUNTESTFLAGS=$(RUNTESTFLAGS)"

# All source files that go into linking GDB.

# Links made at configuration time should not be specified here, since

# SFILES is used in building the distribution archive.

SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c  \

        addrmap.c \

        auxv.c ax-general.c ax-gdb.c \

        bcache.c \

        bfd-target.c \

        block.c blockframe.c breakpoint.c buildsym.c \

        c-exp.y c-lang.c c-typeprint.c c-valprint.c \

        charset.c cli-out.c coffread.c coff-pe-read.c \

        complaints.c completer.c corefile.c \

        cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \

        cp-name-parser.y \

        dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \

        dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \

        elfread.c environ.c eval.c event-loop.c event-top.c expprint.c \

        f-exp.y f-lang.c f-typeprint.c f-valprint.c findvar.c frame.c \

        frame-base.c \

        frame-unwind.c \

        gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \

        inf-loop.c \

        infcall.c \

        infcmd.c inflow.c infrun.c \

        interps.c \

        jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \

        language.c linespec.c \

        m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \

        macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \

        mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \

        objc-exp.y objc-lang.c \

        objfiles.c osabi.c observer.c \

        p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \

        prologue-value.c \

        regcache.c reggroups.c remote.c remote-fileio.c \

        scm-exp.c scm-lang.c scm-valprint.c \

        sentinel-frame.c \

        serial.c ser-base.c ser-unix.c \

        solib.c solib-null.c source.c \

        stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \

        symtab.c \

        target.c target-descriptions.c target-memory.c \

        thread.c top.c tracepoint.c \

        trad-frame.c \

        tramp-frame.c \

        typeprint.c \

        ui-out.c utils.c ui-file.h ui-file.c \

        user-regs.c \

        valarith.c valops.c valprint.c value.c varobj.c vec.c \

        wrapper.c \

        xml-tdesc.c xml-support.c

LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c

# "system" headers.  Using these in dependencies is a rather personal

# choice. (-rich, summer 1993)

# (Why would we not want to depend on them?  If one of these changes in a

# non-binary-compatible way, it is a real pain to remake the right stuff

# without these dependencies -kingdon, 13 Mar 1994)

aout_aout64_h = $(INCLUDE_DIR)/aout/aout64.h

aout_stabs_gnu_h =      $(INCLUDE_DIR)/aout/stabs_gnu.h

getopt_h =      $(INCLUDE_DIR)/getopt.h

floatformat_h = $(INCLUDE_DIR)/floatformat.h

bfd_h =         $(BFD_DIR)/bfd.h

coff_sym_h =    $(INCLUDE_DIR)/coff/sym.h

coff_symconst_h =       $(INCLUDE_DIR)/coff/symconst.h

coff_ecoff_h =  $(INCLUDE_DIR)/coff/ecoff.h

coff_internal_h =       $(INCLUDE_DIR)/coff/internal.h

dis_asm_h =     $(INCLUDE_DIR)/dis-asm.h $(bfd_h)

elf_common_h =  $(INCLUDE_DIR)/elf/common.h

elf_internal_h =        $(INCLUDE_DIR)/elf/internal.h

elf_reloc_macros_h =    $(INCLUDE_DIR)/elf/reloc-macros.h

elf_sh_h =      $(INCLUDE_DIR)/elf/sh.h

elf_arm_h =     $(INCLUDE_DIR)/elf/arm.h $(elf_reloc_macros_h)

elf_bfd_h =     $(BFD_SRC)/elf-bfd.h

elf_frv_h =     $(INCLUDE_DIR)/elf/frv.h $(elf_reloc_macros_h)

elf_m32c_h =    $(INCLUDE_DIR)/elf/m32c.h $(elf_reloc_macros_h)

elf_mep_h =     $(INCLUDE_DIR)/elf/mep.h $(elf_reloc_macros_h)

elf_ppc_h =     $(INCLUDE_DIR)/elf/ppc.h $(elf_reloc_macros_h)

libaout_h =     $(BFD_SRC)/libaout.h

libiberty_h =   $(INCLUDE_DIR)/libiberty.h

libbfd_h =      $(BFD_SRC)/libbfd.h

remote_sim_h =  $(INCLUDE_DIR)/gdb/remote-sim.h

demangle_h =    $(INCLUDE_DIR)/demangle.h

obstack_h =     $(INCLUDE_DIR)/obstack.h

opcode_m68hc11_h = $(INCLUDE_DIR)/opcode/m68hc11.h

readline_h =    $(READLINE_SRC)/readline.h

readline_tilde_h =      $(READLINE_SRC)/tilde.h

readline_history_h =    $(READLINE_SRC)/history.h

frv_desc_h =    $(OPCODES_SRC)/frv-desc.h

mep_desc_h =    $(OPCODES_SRC)/mep-desc.h

mep_opc_h =     $(OPCODES_SRC)/mep-opc.h

sh_opc_h =      $(OPCODES_SRC)/sh-opc.h

gdb_callback_h = $(INCLUDE_DIR)/gdb/callback.h

gdb_fileio_h = $(INCLUDE_DIR)/gdb/fileio.h

gdb_sim_arm_h = $(INCLUDE_DIR)/gdb/sim-arm.h

gdb_sim_frv_h = $(INCLUDE_DIR)/gdb/sim-frv.h

gdb_sim_m32c_h = $(INCLUDE_DIR)/gdb/sim-m32c.h

gdb_sim_ppc_h = $(INCLUDE_DIR)/gdb/sim-ppc.h

gdb_sim_sh_h =  $(INCLUDE_DIR)/gdb/sim-sh.h

splay_tree_h =  $(INCLUDE_DIR)/splay-tree.h

safe_ctype_h =  $(INCLUDE_DIR)/safe-ctype.h

hashtab_h =     $(INCLUDE_DIR)/hashtab.h

filenames_h =   $(INCLUDE_DIR)/filenames.h

decimal128_h = $(LIBDECNUMBER_DIR)/dpd/decimal128.h

decimal64_h = $(LIBDECNUMBER_DIR)/dpd/decimal64.h

decimal32_h = $(LIBDECNUMBER_DIR)/dpd/decimal32.h

#

# $BUILD/ headers

#

config_h = config.h

exc_request_U_h = exc_request_U.h

exc_request_S_h = exc_request_S.h

gdb_stdint_h = gdb_stdint.h

msg_reply_S_h = msg_reply_S.h

msg_U_h = msg_U.h

notify_S_h = notify_S.h

observer_h = observer.h

observer_inc = observer.inc

process_reply_S_h = process_reply_S.h

#

# config/ headers

#

nm_h =          @nm_h@

#

# gdb/ headers

#

ada_lang_h = ada-lang.h $(value_h) $(gdbtypes_h) $(breakpoint_h)

ada_lex_c = ada-lex.c $(gdb_string_h)

addrmap_h = addrmap.h

alphabsd_tdep_h = alphabsd-tdep.h

alpha_tdep_h = alpha-tdep.h

amd64_linux_tdep_h = amd64-linux-tdep.h

amd64_nat_h = amd64-nat.h

amd64_tdep_h = amd64-tdep.h $(i386_tdep_h)

annotate_h = annotate.h $(symtab_h) $(gdbtypes_h)

arch_utils_h = arch-utils.h

arm_linux_tdep_h = arm-linux-tdep.h

arm_tdep_h = arm-tdep.h

auxv_h = auxv.h

ax_gdb_h = ax-gdb.h

ax_h = ax.h $(doublest_h)

bcache_h = bcache.h

bfd_target_h = bfd-target.h

block_h = block.h

breakpoint_h = breakpoint.h $(frame_h) $(value_h) $(gdb_events_h) $(vec_h)

bsd_kvm_h = bsd-kvm.h

bsd_uthread_h = bsd-uthread.h

buildsym_h = buildsym.h

call_cmds_h = call-cmds.h

charset_h = charset.h

c_lang_h = c-lang.h $(value_h) $(macroexp_h)

cli_out_h = cli-out.h

coff_pe_read_h = coff-pe-read.h

command_h = command.h

complaints_h = complaints.h

completer_h = completer.h

cp_abi_h = cp-abi.h

cp_support_h = cp-support.h $(symtab_h)

dcache_h = dcache.h

defs_h = defs.h $(config_h) $(ansidecl_h) $(gdb_locale_h) $(gdb_signals_h) \

        $(libiberty_h) $(bfd_h) $(ui_file_h) $(nm_h) \

        $(fopen_bin_h) $(gdbarch_h)

dictionary_h = dictionary.h

disasm_h = disasm.h

doublest_h = doublest.h $(floatformat_h)

dummy_frame_h = dummy-frame.h

dfp_h = dfp.h

dwarf2expr_h = dwarf2expr.h

dwarf2_frame_h = dwarf2-frame.h

dwarf2loc_h = dwarf2loc.h

environ_h = environ.h

event_loop_h = event-loop.h

event_top_h = event-top.h

exceptions_h = exceptions.h $(ui_out_h)

exec_h = exec.h $(target_h)

expression_h = expression.h $(symtab_h) $(doublest_h)

fbsd_nat_h = fbsd-nat.h

f_lang_h = f-lang.h

frame_base_h = frame-base.h

frame_h = frame.h

frame_unwind_h = frame-unwind.h $(frame_h)

frv_tdep_h = frv-tdep.h

gdbarch_h = gdbarch.h

gdb_assert_h = gdb_assert.h

gdbcmd_h = gdbcmd.h $(command_h) $(ui_out_h)

gdbcore_h = gdbcore.h $(bfd_h)

gdb_curses_h = gdb_curses.h

gdb_dirent_h = gdb_dirent.h

gdb_events_h = gdb-events.h

gdb_h = gdb.h

gdb_expat_h = gdb_expat.h

gdb_locale_h = gdb_locale.h

gdb_obstack_h = gdb_obstack.h $(obstack_h)

gdb_proc_service_h = gdb_proc_service.h $(gregset_h)

gdb_ptrace_h = gdb_ptrace.h

gdb_regex_h = gdb_regex.h $(xregex_h)

gdb_select_h = gdb_select.h

gdb_stabs_h = gdb-stabs.h

gdb_stat_h = gdb_stat.h

gdb_string_h = gdb_string.h

gdb_thread_db_h = gdb_thread_db.h

gdbthread_h = gdbthread.h $(breakpoint_h) $(frame_h)

gdbtypes_h = gdbtypes.h $(hashtab_h)

gdb_vfork_h = gdb_vfork.h

gdb_wait_h = gdb_wait.h

glibc_tdep_h = glibc-tdep.h

gnu_nat_h = gnu-nat.h

gnu_v2_abi_h = gnu-v2-abi.h

gregset_h = gregset.h

hppa_tdep_h = hppa-tdep.h

i386bsd_nat_h = i386bsd-nat.h

i386_cygwin_tdep_h = i386-cygwin-tdep.h

i386_linux_tdep_h = i386-linux-tdep.h

i386_tdep_h = i386-tdep.h

i387_tdep_h = i387-tdep.h

ia64_tdep_h = ia64-tdep.h

infcall_h = infcall.h

inf_child_h = inf-child.h

inferior_h = inferior.h $(breakpoint_h) $(target_h) $(frame_h)

inf_loop_h = inf-loop.h

inflow_h = inflow.h $(terminal_h)

inf_ptrace_h = inf-ptrace.h

inf_ttrace_h = inf-ttrace.h

interps_h = interps.h $(exceptions_h)

jv_lang_h = jv-lang.h

language_h = language.h

libunwind_frame_h = libunwind-frame.h $(libunwind_h)

linespec_h = linespec.h

linux_fork_h = linux-fork.h

linux_nat_h = linux-nat.h $(target_h)

m2_lang_h = m2-lang.h

m32r_tdep_h = m32r-tdep.h

m68k_tdep_h = m68k-tdep.h

m88k_tdep_h = m88k-tdep.h

macroexp_h = macroexp.h

macroscope_h = macroscope.h $(macrotab_h) $(symtab_h)

macrotab_h = macrotab.h

main_h = main.h

mdebugread_h = mdebugread.h $(coff_sym_h) $(coff_symconst_h)

memattr_h = memattr.h $(vec_h)

mips_linux_tdep_h = mips-linux-tdep.h

mipsnbsd_tdep_h = mipsnbsd-tdep.h

mips_tdep_h = mips-tdep.h

memory_map_h = memory-map.h $(memattr_h)

mn10300_tdep_h = mn10300-tdep.h

monitor_h = monitor.h

nbsd_nat_h = nbsd-nat.h

nbsd_tdep_h = nbsd-tdep.h

nto_tdep_h = nto-tdep.h $(solist_h) $(osabi_h) $(regset_h)

objc_lang_h = objc-lang.h

objfiles_h = objfiles.h $(gdb_obstack_h) $(symfile_h)

obsd_tdep_h = obsd-tdep.h

osabi_h = osabi.h

parser_defs_h = parser-defs.h $(doublest_h)

p_lang_h = p-lang.h

ppcnbsd_tdep_h = ppcnbsd-tdep.h

ppcobsd_tdep_h = ppcobsd-tdep.h

ppc_tdep_h = ppc-tdep.h

proc_utils_h = proc-utils.h

prologue_value_h = prologue-value.h

regcache_h = regcache.h

reggroups_h = reggroups.h

regset_h = regset.h

remote_fileio_h = remote-fileio.h

remote_h = remote.h

rs6000_tdep_h = rs6000-tdep.h

s390_tdep_h = s390-tdep.h

scm_lang_h = scm-lang.h $(scm_tags_h)

scm_tags_h = scm-tags.h

score_tdep_h = score-tdep.h

sentinel_frame_h = sentinel-frame.h

serial_h = serial.h

ser_base_h = ser-base.h

ser_tcp_h = ser-tcp.h

ser_unix_h = ser-unix.h

shnbsd_tdep_h = shnbsd-tdep.h

sh_tdep_h = sh-tdep.h

sim_regno_h = sim-regno.h

sol2_tdep_h = sol2-tdep.h

solib_h = solib.h

solib_irix_h = solib-irix.h

solib_pa64_h = solib-pa64.h

solib_som_h = solib-som.h

solib_svr4_h = solib-svr4.h

solib_target_h = solib-target.h

solist_h = solist.h $(symtab_h)

source_h = source.h

sparc64_tdep_h = sparc64-tdep.h $(sparc_tdep_h)

sparc_nat_h = sparc-nat.h

sparc_tdep_h = sparc-tdep.h

spu_tdep_h = spu-tdep.h

srec_h = srec.h

stabsread_h = stabsread.h

stack_h = stack.h

symfile_h = symfile.h $(symtab_h)

symtab_h = symtab.h

target_h = target.h $(bfd_h) $(symtab_h) $(dcache_h) $(memattr_h) $(vec_h)

target_descriptions_h = target-descriptions.h

terminal_h = terminal.h

top_h = top.h

tracepoint_h = tracepoint.h

trad_frame_h = trad-frame.h $(frame_h)

tramp_frame_h = tramp-frame.h $(frame_h)

typeprint_h = typeprint.h

ui_file_h = ui-file.h

ui_out_h = ui-out.h

user_regs_h = user-regs.h

valprint_h = valprint.h

value_h = value.h $(doublest_h) $(frame_h) $(symtab_h) $(gdbtypes_h) \

        $(expression_h)

varobj_h = varobj.h $(symtab_h) $(gdbtypes_h) $(vec_h)

vax_tdep_h = vax-tdep.h

vec_h = vec.h $(gdb_assert_h) $(gdb_string_h)

version_h = version.h

wrapper_h = wrapper.h $(gdb_h)

xcoffsolib_h = xcoffsolib.h

xml_support_h = xml-support.h $(gdb_obstack_h) $(vec_h)

xml_tdesc_h = xml-tdesc.h

xtensa_tdep_h = xtensa-tdep.h

#

# gdb/cli/ headers

#

cli_cmds_h = $(srcdir)/cli/cli-cmds.h

cli_decode_h = $(srcdir)/cli/cli-decode.h $(command_h)

cli_dump_h = $(srcdir)/cli/cli-dump.h

cli_script_h = $(srcdir)/cli/cli-script.h

cli_setshow_h = $(srcdir)/cli/cli-setshow.h

cli_utils_h = $(srcdir)/cli/cli-utils.h

#

# gdb/mi/ headers

#

mi_cmds_h = $(srcdir)/mi/mi-cmds.h

mi_console_h = $(srcdir)/mi/mi-console.h

mi_getopt_h = $(srcdir)/mi/mi-getopt.h

mi_main_h = $(srcdir)/mi/mi-main.h

mi_out_h = $(srcdir)/mi/mi-out.h

mi_parse_h = $(srcdir)/mi/mi-parse.h

mi_common_h = $(srcdir)/mi/mi-common.h

#

# gdb/tui/ headers