Subversion Repositories openrisc_me

/* Caching code for GDB, the GNU debugger.

   Copyright (C) 1992, 1993, 1995, 1996, 1998, 1999, 2000, 2001, 2003, 2007,

   2008 Free Software Foundation, Inc.

   This file is part of GDB.

   This program is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 3 of the License, or

   (at your option) any later version.

   This program is distributed in the hope that it will be useful,

   but WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License

   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */

#include "defs.h"

#include "dcache.h"

#include "gdbcmd.h"

#include "gdb_string.h"

#include "gdbcore.h"

#include "target.h"

/* The data cache could lead to incorrect results because it doesn't

   know about volatile variables, thus making it impossible to debug

   functions which use memory mapped I/O devices.  Set the nocache

   memory region attribute in those cases.

   In general the dcache speeds up performance, some speed improvement

   comes from the actual caching mechanism, but the major gain is in

   the reduction of the remote protocol overhead; instead of reading

   or writing a large area of memory in 4 byte requests, the cache

   bundles up the requests into 32 byte (actually LINE_SIZE) chunks.

   Reducing the overhead to an eighth of what it was.  This is very

   obvious when displaying a large amount of data,

   eg, x/200x 0

   caching     |   no    yes

   ----------------------------

   first time  |   4 sec  2 sec improvement due to chunking

   second time |   4 sec  0 sec improvement due to caching

   The cache structure is unusual, we keep a number of cache blocks

   (DCACHE_SIZE) and each one caches a LINE_SIZEed area of memory.

   Within each line we remember the address of the line (always a

   multiple of the LINE_SIZE) and a vector of bytes over the range.

   There's another vector which contains the state of the bytes.

   ENTRY_BAD means that the byte is just plain wrong, and has no

   correspondence with anything else (as it would when the cache is

   turned on, but nothing has been done to it.

   ENTRY_DIRTY means that the byte has some data in it which should be

   written out to the remote target one day, but contains correct

   data.

   ENTRY_OK means that the data is the same in the cache as it is in

   remote memory.

   The ENTRY_DIRTY state is necessary because GDB likes to write large

   lumps of memory in small bits.  If the caching mechanism didn't

   maintain the DIRTY information, then something like a two byte

   write would mean that the entire cache line would have to be read,

   the two bytes modified and then written out again.  The alternative

   would be to not read in the cache line in the first place, and just

   write the two bytes directly into target memory.  The trouble with

   that is that it really nails performance, because of the remote

   protocol overhead.  This way, all those little writes are bundled

   up into an entire cache line write in one go, without having to

   read the cache line in the first place.

 */

/* NOTE: Interaction of dcache and memory region attributes

   As there is no requirement that memory region attributes be aligned

   to or be a multiple of the dcache page size, dcache_read_line() and

   dcache_write_line() must break up the page by memory region.  If a

   chunk does not have the cache attribute set, an invalid memory type

   is set, etc., then the chunk is skipped.  Those chunks are handled

   in target_xfer_memory() (or target_xfer_memory_partial()).

   This doesn't occur very often.  The most common occurance is when

   the last bit of the .text segment and the first bit of the .data

   segment fall within the same dcache page with a ro/cacheable memory

   region defined for the .text segment and a rw/non-cacheable memory

   region defined for the .data segment. */

/* This value regulates the number of cache blocks stored.

   Smaller values reduce the time spent searching for a cache

   line, and reduce memory requirements, but increase the risk

   of a line not being in memory */

#define DCACHE_SIZE 64

/* This value regulates the size of a cache line.  Smaller values

   reduce the time taken to read a single byte, but reduce overall

   throughput.  */

#define LINE_SIZE_POWER (5)

#define LINE_SIZE (1 << LINE_SIZE_POWER)

/* Each cache block holds LINE_SIZE bytes of data

   starting at a multiple-of-LINE_SIZE address.  */

#define LINE_SIZE_MASK  ((LINE_SIZE - 1))

#define XFORM(x)        ((x) & LINE_SIZE_MASK)

#define MASK(x)         ((x) & ~LINE_SIZE_MASK)

#define ENTRY_BAD   0           /* data at this byte is wrong */

#define ENTRY_DIRTY 1           /* data at this byte needs to be written back */

#define ENTRY_OK    2           /* data at this byte is same as in memory */

struct dcache_block

  {

    struct dcache_block *p;     /* next in list */

    CORE_ADDR addr;             /* Address for which data is recorded.  */

    gdb_byte data[LINE_SIZE];   /* bytes at given address */

    unsigned char state[LINE_SIZE];     /* what state the data is in */

    /* whether anything in state is dirty - used to speed up the

       dirty scan. */

    int anydirty;

    int refs;

  };

/* FIXME: dcache_struct used to have a cache_has_stuff field that was

   used to record whether the cache had been accessed.  This was used

   to invalidate the cache whenever caching was (re-)enabled (if the

   cache was disabled and later re-enabled, it could contain stale

   data).  This was not needed because the cache is write through and

   the code that enables, disables, and deletes memory region all

   invalidate the cache.

   This is overkill, since it also invalidates cache lines from

   unrelated regions.  One way this could be addressed by adding a

   new function that takes an address and a length and invalidates

   only those cache lines that match. */

struct dcache_struct

  {

    /* free list */

    struct dcache_block *free_head;

    struct dcache_block *free_tail;

    /* in use list */

    struct dcache_block *valid_head;

    struct dcache_block *valid_tail;

    /* The cache itself. */

    struct dcache_block *the_cache;

  };

static struct dcache_block *dcache_hit (DCACHE *dcache, CORE_ADDR addr);

static int dcache_write_line (DCACHE *dcache, struct dcache_block *db);

static int dcache_read_line (DCACHE *dcache, struct dcache_block *db);

static struct dcache_block *dcache_alloc (DCACHE *dcache, CORE_ADDR addr);

static int dcache_writeback (DCACHE *dcache);

static void dcache_info (char *exp, int tty);

void _initialize_dcache (void);

static int dcache_enabled_p = 0;

static void

show_dcache_enabled_p (struct ui_file *file, int from_tty,

                       struct cmd_list_element *c, const char *value)

{

  fprintf_filtered (file, _("Cache use for remote targets is %s.\n"), value);

}

DCACHE *last_cache;             /* Used by info dcache */

/* Free all the data cache blocks, thus discarding all cached data.  */

void

dcache_invalidate (DCACHE *dcache)

{

  int i;

  dcache->valid_head = 0;

  dcache->valid_tail = 0;

  dcache->free_head = 0;

  dcache->free_tail = 0;

  for (i = 0; i < DCACHE_SIZE; i++)

    {

      struct dcache_block *db = dcache->the_cache + i;

      if (!dcache->free_head)

        dcache->free_head = db;

      else

        dcache->free_tail->p = db;

      dcache->free_tail = db;

      db->p = 0;

    }

  return;

}

/* If addr is present in the dcache, return the address of the block

   containing it. */

static struct dcache_block *

dcache_hit (DCACHE *dcache, CORE_ADDR addr)

{

  struct dcache_block *db;

  /* Search all cache blocks for one that is at this address.  */

  db = dcache->valid_head;

  while (db)

    {

      if (MASK (addr) == db->addr)

        {

          db->refs++;

          return db;

        }

      db = db->p;

    }

  return NULL;

}

/* Make sure that anything in this line which needs to

   be written is. */

static int

dcache_write_line (DCACHE *dcache, struct dcache_block *db)

{

  CORE_ADDR memaddr;

  gdb_byte *myaddr;

  int len;

  int res;

  int reg_len;

  struct mem_region *region;

  if (!db->anydirty)

    return 1;

  len = LINE_SIZE;

  memaddr = db->addr;

  myaddr  = db->data;

  while (len > 0)

    {

      int s;

      int e;

      int dirty_len;

      region = lookup_mem_region(memaddr);

      if (memaddr + len < region->hi)

        reg_len = len;

      else

        reg_len = region->hi - memaddr;

      if (!region->attrib.cache || region->attrib.mode == MEM_RO)

        {

          memaddr += reg_len;

          myaddr  += reg_len;

          len     -= reg_len;

          continue;

        }

      while (reg_len > 0)

        {

          s = XFORM(memaddr);

          while (reg_len > 0) {

            if (db->state[s] == ENTRY_DIRTY)

              break;

            s++;

            reg_len--;

            memaddr++;

            myaddr++;

            len--;

          }

          e = s;

          while (reg_len > 0) {

            if (db->state[e] != ENTRY_DIRTY)

              break;

            e++;

            reg_len--;

          }

          dirty_len = e - s;

          res = target_write (&current_target, TARGET_OBJECT_RAW_MEMORY,

                              NULL, myaddr, memaddr, dirty_len);

          if (res < dirty_len)

            return 0;

          memset (&db->state[XFORM(memaddr)], ENTRY_OK, res);

          memaddr += res;

          myaddr += res;

          len -= res;

        }

    }

  db->anydirty = 0;

  return 1;

}

/* Read cache line */

static int

dcache_read_line (DCACHE *dcache, struct dcache_block *db)

{

  CORE_ADDR memaddr;

  gdb_byte *myaddr;

  int len;

  int res;

  int reg_len;

  struct mem_region *region;

  /* If there are any dirty bytes in the line, it must be written

     before a new line can be read */

  if (db->anydirty)

    {

      if (!dcache_write_line (dcache, db))

        return 0;

    }

  len = LINE_SIZE;

  memaddr = db->addr;

  myaddr  = db->data;

  while (len > 0)

    {

      region = lookup_mem_region(memaddr);

      if (memaddr + len < region->hi)

        reg_len = len;

      else

        reg_len = region->hi - memaddr;

      if (!region->attrib.cache || region->attrib.mode == MEM_WO)

        {

          memaddr += reg_len;

          myaddr  += reg_len;

          len     -= reg_len;

          continue;

        }

      res = target_read (&current_target, TARGET_OBJECT_RAW_MEMORY,

                         NULL, myaddr, memaddr, reg_len);

      if (res < reg_len)

        return 0;

      memaddr += res;

      myaddr += res;

      len -= res;

    }

  memset (db->state, ENTRY_OK, sizeof (db->data));

  db->anydirty = 0;

  return 1;

}

/* Get a free cache block, put or keep it on the valid list,

   and return its address.  */

static struct dcache_block *

dcache_alloc (DCACHE *dcache, CORE_ADDR addr)

{

  struct dcache_block *db;

  /* Take something from the free list */

  db = dcache->free_head;

  if (db)

    {

      dcache->free_head = db->p;

    }

  else

    {

      /* Nothing left on free list, so grab one from the valid list */

      db = dcache->valid_head;

      if (!dcache_write_line (dcache, db))

        return NULL;

      dcache->valid_head = db->p;

    }

  db->addr = MASK(addr);

  db->refs = 0;

  db->anydirty = 0;

  memset (db->state, ENTRY_BAD, sizeof (db->data));

  /* append this line to end of valid list */

  if (!dcache->valid_head)

    dcache->valid_head = db;

  else

    dcache->valid_tail->p = db;

  dcache->valid_tail = db;

  db->p = 0;

  return db;

}

/* Writeback any dirty lines. */

static int

dcache_writeback (DCACHE *dcache)

{

  struct dcache_block *db;

  db = dcache->valid_head;

  while (db)

    {

      if (!dcache_write_line (dcache, db))

        return 0;

      db = db->p;

    }

  return 1;

}

/* Using the data cache DCACHE return the contents of the byte at

   address ADDR in the remote machine.

   Returns 0 on error. */

static int

dcache_peek_byte (DCACHE *dcache, CORE_ADDR addr, gdb_byte *ptr)

{

  struct dcache_block *db = dcache_hit (dcache, addr);

  if (!db)

    {

      db = dcache_alloc (dcache, addr);

      if (!db)

        return 0;

    }

  if (db->state[XFORM (addr)] == ENTRY_BAD)

    {

      if (!dcache_read_line(dcache, db))

         return 0;

    }

  *ptr = db->data[XFORM (addr)];

  return 1;

}

/* Write the byte at PTR into ADDR in the data cache.

   Return zero on write error.

 */

static int

dcache_poke_byte (DCACHE *dcache, CORE_ADDR addr, gdb_byte *ptr)

{

  struct dcache_block *db = dcache_hit (dcache, addr);

  if (!db)

    {

      db = dcache_alloc (dcache, addr);

      if (!db)

        return 0;

    }

  db->data[XFORM (addr)] = *ptr;

  db->state[XFORM (addr)] = ENTRY_DIRTY;

  db->anydirty = 1;

  return 1;

}

/* Initialize the data cache.  */

DCACHE *

dcache_init (void)

{

  int csize = sizeof (struct dcache_block) * DCACHE_SIZE;

  DCACHE *dcache;

  dcache = (DCACHE *) xmalloc (sizeof (*dcache));

  dcache->the_cache = (struct dcache_block *) xmalloc (csize);

  memset (dcache->the_cache, 0, csize);

  dcache_invalidate (dcache);

  last_cache = dcache;

  return dcache;

}

/* Free a data cache */

void

dcache_free (DCACHE *dcache)

{

  if (last_cache == dcache)

    last_cache = NULL;

  xfree (dcache->the_cache);

  xfree (dcache);

}

/* Read or write LEN bytes from inferior memory at MEMADDR, transferring

   to or from debugger address MYADDR.  Write to inferior if SHOULD_WRITE is

   nonzero.

   Returns length of data written or read; 0 for error.

   This routine is indended to be called by remote_xfer_ functions. */

int

dcache_xfer_memory (DCACHE *dcache, CORE_ADDR memaddr, gdb_byte *myaddr,

                    int len, int should_write)

{

  int i;

  int (*xfunc) (DCACHE *dcache, CORE_ADDR addr, gdb_byte *ptr);

  xfunc = should_write ? dcache_poke_byte : dcache_peek_byte;

  for (i = 0; i < len; i++)

    {

      if (!xfunc (dcache, memaddr + i, myaddr + i))

        return 0;

    }

  /* FIXME: There may be some benefit from moving the cache writeback

     to a higher layer, as it could occur after a sequence of smaller

     writes have been completed (as when a stack frame is constructed

     for an inferior function call).  Note that only moving it up one

     level to target_xfer_memory() (also target_xfer_memory_partial())

     is not sufficent, since we want to coalesce memory transfers that

     are "logically" connected but not actually a single call to one

     of the memory transfer functions. */

  if (should_write)

    dcache_writeback (dcache);

  return len;

}

static void

dcache_info (char *exp, int tty)

{

  struct dcache_block *p;

  printf_filtered (_("Dcache line width %d, depth %d\n"),

                   LINE_SIZE, DCACHE_SIZE);

  if (last_cache)

    {

      printf_filtered (_("Cache state:\n"));

      for (p = last_cache->valid_head; p; p = p->p)

        {

          int j;

          printf_filtered (_("Line at %s, referenced %d times\n"),

                           paddr (p->addr), p->refs);

          for (j = 0; j < LINE_SIZE; j++)

            printf_filtered ("%02x", p->data[j] & 0xFF);

          printf_filtered (("\n"));

          for (j = 0; j < LINE_SIZE; j++)

            printf_filtered ("%2x", p->state[j]);

          printf_filtered ("\n");

        }

    }

}

void

_initialize_dcache (void)

{

  add_setshow_boolean_cmd ("remotecache", class_support,

                           &dcache_enabled_p, _("\

Set cache use for remote targets."), _("\

Show cache use for remote targets."), _("\

When on, use data caching for remote targets.  For many remote targets\n\

this option can offer better throughput for reading target memory.\n\

Unfortunately, gdb does not currently know anything about volatile\n\

registers and thus data caching will produce incorrect results with\n\

volatile registers are in use.  By default, this option is off."),

                           NULL,

                           show_dcache_enabled_p,

                           &setlist, &showlist);

  add_info ("dcache", dcache_info,

            _("Print information on the dcache performance."));

}