Subversion Repositories openrisc_2011-10-31

This is gdb.info, produced by makeinfo version 4.8 from

../.././gdb/doc/gdb.texinfo.

INFO-DIR-SECTION Software development

START-INFO-DIR-ENTRY

* Gdb: (gdb).                     The GNU debugger.

END-INFO-DIR-ENTRY

   This file documents the GNU debugger GDB.

   This is the Ninth Edition, of `Debugging with GDB: the GNU

Source-Level Debugger' for GDB Version 6.8.

   Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,

1998,

1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006

Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document

under the terms of the GNU Free Documentation License, Version 1.1 or

any later version published by the Free Software Foundation; with the

Invariant Sections being "Free Software" and "Free Software Needs Free

Documentation", with the Front-Cover Texts being "A GNU Manual," and

with the Back-Cover Texts as in (a) below.

   (a) The FSF's Back-Cover Text is: "You are free to copy and modify

this GNU Manual.  Buying copies from GNU Press supports the FSF in

developing GNU and promoting software freedom."

File: gdb.info,  Node: Bytecode Descriptions,  Next: Using Agent Expressions,  Prev: General Bytecode Design,  Up: Agent Expressions

E.2 Bytecode Descriptions

=========================

Each bytecode description has the following form:

`add' (0x02): A B => A+B

     Pop the top two stack items, A and B, as integers; push their sum,

     as an integer.

   In this example, `add' is the name of the bytecode, and `(0x02)' is

the one-byte value used to encode the bytecode, in hexadecimal.  The

phrase "A B => A+B" shows the stack before and after the bytecode

executes.  Beforehand, the stack must contain at least two values, A

and B; since the top of the stack is to the right, B is on the top of

the stack, and A is underneath it.  After execution, the bytecode will

have popped A and B from the stack, and replaced them with a single

value, A+B.  There may be other values on the stack below those shown,

but the bytecode affects only those shown.

   Here is another example:

`const8' (0x22) N: => N

     Push the 8-bit integer constant N on the stack, without sign

     extension.

   In this example, the bytecode `const8' takes an operand N directly

from the bytecode stream; the operand follows the `const8' bytecode

itself.  We write any such operands immediately after the name of the

bytecode, before the colon, and describe the exact encoding of the

operand in the bytecode stream in the body of the bytecode description.

   For the `const8' bytecode, there are no stack items given before the

=>; this simply means that the bytecode consumes no values from the

stack.  If a bytecode consumes no values, or produces no values, the

list on either side of the => may be empty.

   If a value is written as A, B, or N, then the bytecode treats it as

an integer.  If a value is written is ADDR, then the bytecode treats it

as an address.

   We do not fully describe the floating point operations here; although

this design can be extended in a clean way to handle floating point

values, they are not of immediate interest to the customer, so we avoid

describing them, to save time.

`float' (0x01): =>

     Prefix for floating-point bytecodes.  Not implemented yet.

`add' (0x02): A B => A+B

     Pop two integers from the stack, and push their sum, as an integer.

`sub' (0x03): A B => A-B

     Pop two integers from the stack, subtract the top value from the

     next-to-top value, and push the difference.

`mul' (0x04): A B => A*B

     Pop two integers from the stack, multiply them, and push the

     product on the stack.  Note that, when one multiplies two N-bit

     numbers yielding another N-bit number, it is irrelevant whether the

     numbers are signed or not; the results are the same.

`div_signed' (0x05): A B => A/B

     Pop two signed integers from the stack; divide the next-to-top

     value by the top value, and push the quotient.  If the divisor is

     zero, terminate with an error.

`div_unsigned' (0x06): A B => A/B

     Pop two unsigned integers from the stack; divide the next-to-top

     value by the top value, and push the quotient.  If the divisor is

     zero, terminate with an error.

`rem_signed' (0x07): A B => A MODULO B

     Pop two signed integers from the stack; divide the next-to-top

     value by the top value, and push the remainder.  If the divisor is

     zero, terminate with an error.

`rem_unsigned' (0x08): A B => A MODULO B

     Pop two unsigned integers from the stack; divide the next-to-top

     value by the top value, and push the remainder.  If the divisor is

     zero, terminate with an error.

`lsh' (0x09): A B => A<

     Pop two integers from the stack; let A be the next-to-top value,

     and B be the top value.  Shift A left by B bits, and push the

     result.

`rsh_signed' (0x0a): A B => `(signed)'A>>B

     Pop two integers from the stack; let A be the next-to-top value,

     and B be the top value.  Shift A right by B bits, inserting copies

     of the top bit at the high end, and push the result.

`rsh_unsigned' (0x0b): A B => A>>B

     Pop two integers from the stack; let A be the next-to-top value,

     and B be the top value.  Shift A right by B bits, inserting zero

     bits at the high end, and push the result.

`log_not' (0x0e): A => !A

     Pop an integer from the stack; if it is zero, push the value one;

     otherwise, push the value zero.

`bit_and' (0x0f): A B => A&B

     Pop two integers from the stack, and push their bitwise `and'.

`bit_or' (0x10): A B => A|B

     Pop two integers from the stack, and push their bitwise `or'.

`bit_xor' (0x11): A B => A^B

     Pop two integers from the stack, and push their bitwise

     exclusive-`or'.

`bit_not' (0x12): A => ~A

     Pop an integer from the stack, and push its bitwise complement.

`equal' (0x13): A B => A=B

     Pop two integers from the stack; if they are equal, push the value

     one; otherwise, push the value zero.

`less_signed' (0x14): A B => A

     Pop two signed integers from the stack; if the next-to-top value

     is less than the top value, push the value one; otherwise, push

     the value zero.

`less_unsigned' (0x15): A B => A

     Pop two unsigned integers from the stack; if the next-to-top value

     is less than the top value, push the value one; otherwise, push

     the value zero.

`ext' (0x16) N: A => A, sign-extended from N bits

     Pop an unsigned value from the stack; treating it as an N-bit

     twos-complement value, extend it to full length.  This means that

     all bits to the left of bit N-1 (where the least significant bit

     is bit 0) are set to the value of bit N-1.  Note that N may be

     larger than or equal to the width of the stack elements of the

     bytecode engine; in this case, the bytecode should have no effect.

     The number of source bits to preserve, N, is encoded as a single

     byte unsigned integer following the `ext' bytecode.

`zero_ext' (0x2a) N: A => A, zero-extended from N bits

     Pop an unsigned value from the stack; zero all but the bottom N

     bits.  This means that all bits to the left of bit N-1 (where the

     least significant bit is bit 0) are set to the value of bit N-1.

     The number of source bits to preserve, N, is encoded as a single

     byte unsigned integer following the `zero_ext' bytecode.

`ref8' (0x17): ADDR => A

`ref16' (0x18): ADDR => A

`ref32' (0x19): ADDR => A

`ref64' (0x1a): ADDR => A

     Pop an address ADDR from the stack.  For bytecode `ref'N, fetch an

     N-bit value from ADDR, using the natural target endianness.  Push

     the fetched value as an unsigned integer.

     Note that ADDR may not be aligned in any particular way; the

     `refN' bytecodes should operate correctly for any address.

     If attempting to access memory at ADDR would cause a processor

     exception of some sort, terminate with an error.

`ref_float' (0x1b): ADDR => D

`ref_double' (0x1c): ADDR => D

`ref_long_double' (0x1d): ADDR => D

`l_to_d' (0x1e): A => D

`d_to_l' (0x1f): D => A

     Not implemented yet.

`dup' (0x28): A => A A

     Push another copy of the stack's top element.

`swap' (0x2b): A B => B A

     Exchange the top two items on the stack.

`pop' (0x29): A =>

     Discard the top value on the stack.

`if_goto' (0x20) OFFSET: A =>

     Pop an integer off the stack; if it is non-zero, branch to the

     given offset in the bytecode string.  Otherwise, continue to the

     next instruction in the bytecode stream.  In other words, if A is

     non-zero, set the `pc' register to `start' + OFFSET.  Thus, an

     offset of zero denotes the beginning of the expression.

     The OFFSET is stored as a sixteen-bit unsigned value, stored

     immediately following the `if_goto' bytecode.  It is always stored

     most significant byte first, regardless of the target's normal

     endianness.  The offset is not guaranteed to fall at any particular

     alignment within the bytecode stream; thus, on machines where

     fetching a 16-bit on an unaligned address raises an exception, you

     should fetch the offset one byte at a time.

`goto' (0x21) OFFSET: =>

     Branch unconditionally to OFFSET; in other words, set the `pc'

     register to `start' + OFFSET.

     The offset is stored in the same way as for the `if_goto' bytecode.

`const8' (0x22) N: => N

`const16' (0x23) N: => N

`const32' (0x24) N: => N

`const64' (0x25) N: => N

     Push the integer constant N on the stack, without sign extension.

     To produce a small negative value, push a small twos-complement

     value, and then sign-extend it using the `ext' bytecode.

     The constant N is stored in the appropriate number of bytes

     following the `const'B bytecode.  The constant N is always stored

     most significant byte first, regardless of the target's normal

     endianness.  The constant is not guaranteed to fall at any

     particular alignment within the bytecode stream; thus, on machines

     where fetching a 16-bit on an unaligned address raises an

     exception, you should fetch N one byte at a time.

`reg' (0x26) N: => A

     Push the value of register number N, without sign extension.  The

     registers are numbered following GDB's conventions.

     The register number N is encoded as a 16-bit unsigned integer

     immediately following the `reg' bytecode.  It is always stored most

     significant byte first, regardless of the target's normal

     endianness.  The register number is not guaranteed to fall at any

     particular alignment within the bytecode stream; thus, on machines

     where fetching a 16-bit on an unaligned address raises an

     exception, you should fetch the register number one byte at a time.

`trace' (0x0c): ADDR SIZE =>

     Record the contents of the SIZE bytes at ADDR in a trace buffer,

     for later retrieval by GDB.

`trace_quick' (0x0d) SIZE: ADDR => ADDR

     Record the contents of the SIZE bytes at ADDR in a trace buffer,

     for later retrieval by GDB.  SIZE is a single byte unsigned

     integer following the `trace' opcode.

     This bytecode is equivalent to the sequence `dup const8 SIZE

     trace', but we provide it anyway to save space in bytecode strings.

`trace16' (0x30) SIZE: ADDR => ADDR

     Identical to trace_quick, except that SIZE is a 16-bit big-endian

     unsigned integer, not a single byte.  This should probably have

     been named `trace_quick16', for consistency.

`end' (0x27): =>

     Stop executing bytecode; the result should be the top element of

     the stack.  If the purpose of the expression was to compute an

     lvalue or a range of memory, then the next-to-top of the stack is

     the lvalue's address, and the top of the stack is the lvalue's

     size, in bytes.

File: gdb.info,  Node: Using Agent Expressions,  Next: Varying Target Capabilities,  Prev: Bytecode Descriptions,  Up: Agent Expressions

E.3 Using Agent Expressions

===========================

Here is a sketch of a full non-stop debugging cycle, showing how agent

expressions fit into the process.

   * The user selects trace points in the program's code at which GDB

     should collect data.

   * The user specifies expressions to evaluate at each trace point.

     These expressions may denote objects in memory, in which case

     those objects' contents are recorded as the program runs, or

     computed values, in which case the values themselves are recorded.

   * GDB transmits the tracepoints and their associated expressions to

     the GDB agent, running on the debugging target.

   * The agent arranges to be notified when a trace point is hit.  Note

     that, on some systems, the target operating system is completely

     responsible for collecting the data; see *Note Tracing on

     Symmetrix::.

   * When execution on the target reaches a trace point, the agent

     evaluates the expressions associated with that trace point, and

     records the resulting values and memory ranges.

   * Later, when the user selects a given trace event and inspects the

     objects and expression values recorded, GDB talks to the agent to

     retrieve recorded data as necessary to meet the user's requests.

     If the user asks to see an object whose contents have not been

     recorded, GDB reports an error.

File: gdb.info,  Node: Varying Target Capabilities,  Next: Tracing on Symmetrix,  Prev: Using Agent Expressions,  Up: Agent Expressions

E.4 Varying Target Capabilities

===============================

Some targets don't support floating-point, and some would rather not

have to deal with `long long' operations.  Also, different targets will

have different stack sizes, and different bytecode buffer lengths.

   Thus, GDB needs a way to ask the target about itself.  We haven't

worked out the details yet, but in general, GDB should be able to send

the target a packet asking it to describe itself.  The reply should be a

packet whose length is explicit, so we can add new information to the

packet in future revisions of the agent, without confusing old versions

of GDB, and it should contain a version number.  It should contain at

least the following information:

   * whether floating point is supported

   * whether `long long' is supported

   * maximum acceptable size of bytecode stack

   * maximum acceptable length of bytecode expressions

   * which registers are actually available for collection

   * whether the target supports disabled tracepoints

File: gdb.info,  Node: Tracing on Symmetrix,  Next: Rationale,  Prev: Varying Target Capabilities,  Up: Agent Expressions

E.5 Tracing on Symmetrix

========================

This section documents the API used by the GDB agent to collect data on

Symmetrix systems.

   Cygnus originally implemented these tracing features to help EMC

Corporation debug their Symmetrix high-availability disk drives.  The

Symmetrix application code already includes substantial tracing

facilities; the GDB agent for the Symmetrix system uses those facilities

for its own data collection, via the API described here.

 -- Function: DTC_RESPONSE adbg_find_memory_in_frame (FRAME_DEF *FRAME,

          char *ADDRESS, char **BUFFER, unsigned int *SIZE)

     Search the trace frame FRAME for memory saved from ADDRESS.  If

     the memory is available, provide the address of the buffer holding

     it; otherwise, provide the address of the next saved area.

        * If the memory at ADDRESS was saved in FRAME, set `*BUFFER' to

          point to the buffer in which that memory was saved, set

          `*SIZE' to the number of bytes from ADDRESS that are saved at

          `*BUFFER', and return `OK_TARGET_RESPONSE'.  (Clearly, in

          this case, the function will always set `*SIZE' to a value

          greater than zero.)

        * If FRAME does not record any memory at ADDRESS, set `*SIZE'

          to the distance from ADDRESS to the start of the saved region

          with the lowest address higher than ADDRESS.  If there is no

          memory saved from any higher address, set `*SIZE' to zero.

          Return `NOT_FOUND_TARGET_RESPONSE'.

     These two possibilities allow the caller to either retrieve the

     data, or walk the address space to the next saved area.

   This function allows the GDB agent to map the regions of memory

saved in a particular frame, and retrieve their contents efficiently.

   This function also provides a clean interface between the GDB agent

and the Symmetrix tracing structures, making it easier to adapt the GDB

agent to future versions of the Symmetrix system, and vice versa.  This

function searches all data saved in FRAME, whether the data is there at

the request of a bytecode expression, or because it falls in one of the

format's memory ranges, or because it was saved from the top of the

stack.  EMC can arbitrarily change and enhance the tracing mechanism,

but as long as this function works properly, all collected memory is

visible to GDB.

   The function itself is straightforward to implement.  A single pass

over the trace frame's stack area, memory ranges, and expression blocks

can yield the address of the buffer (if the requested address was

saved), and also note the address of the next higher range of memory,

to be returned when the search fails.

   As an example, suppose the trace frame `f' has saved sixteen bytes

from address `0x8000' in a buffer at `0x1000', and thirty-two bytes

from address `0xc000' in a buffer at `0x1010'.  Here are some sample

calls, and the effect each would have:

`adbg_find_memory_in_frame (f, (char*) 0x8000, &buffer, &size)'

     This would set `buffer' to `0x1000', set `size' to sixteen, and

     return `OK_TARGET_RESPONSE', since `f' saves sixteen bytes from

     `0x8000' at `0x1000'.

`adbg_find_memory_in_frame (f, (char *) 0x8004, &buffer, &size)'

     This would set `buffer' to `0x1004', set `size' to twelve, and

     return `OK_TARGET_RESPONSE', since `f' saves the twelve bytes from

     `0x8004' starting four bytes into the buffer at `0x1000'.  This

     shows that request addresses may fall in the middle of saved

     areas; the function should return the address and size of the

     remainder of the buffer.

`adbg_find_memory_in_frame (f, (char *) 0x8100, &buffer, &size)'

     This would set `size' to `0x3f00' and return

     `NOT_FOUND_TARGET_RESPONSE', since there is no memory saved in `f'

     from the address `0x8100', and the next memory available is at

     `0x8100 + 0x3f00', or `0xc000'.  This shows that request addresses

     may fall outside of all saved memory ranges; the function should

     indicate the next saved area, if any.

`adbg_find_memory_in_frame (f, (char *) 0x7000, &buffer, &size)'

     This would set `size' to `0x1000' and return

     `NOT_FOUND_TARGET_RESPONSE', since the next saved memory is at

     `0x7000 + 0x1000', or `0x8000'.

`adbg_find_memory_in_frame (f, (char *) 0xf000, &buffer, &size)'

     This would set `size' to zero, and return

     `NOT_FOUND_TARGET_RESPONSE'.  This shows how the function tells the

     caller that no further memory ranges have been saved.

   As another example, here is a function which will print out the

addresses of all memory saved in the trace frame `frame' on the

Symmetrix INLINES console:

     void

     print_frame_addresses (FRAME_DEF *frame)

     {

       char *addr;

       char *buffer;

       unsigned long size;

       addr = 0;

       for (;;)

         {

           /* Either find out how much memory we have here, or discover

              where the next saved region is.  */

           if (adbg_find_memory_in_frame (frame, addr, &buffer, &size)

               == OK_TARGET_RESPONSE)

             printp ("saved %x to %x\n", addr, addr + size);

           if (size == 0)

             break;

           addr += size;

         }

     }

   Note that there is not necessarily any connection between the order

in which the data is saved in the trace frame, and the order in which

`adbg_find_memory_in_frame' will return those memory ranges.  The code

above will always print the saved memory regions in order of increasing

address, while the underlying frame structure might store the data in a

random order.

   [[This section should cover the rest of the Symmetrix functions the

stub relies upon, too.]]

File: gdb.info,  Node: Rationale,  Prev: Tracing on Symmetrix,  Up: Agent Expressions

E.6 Rationale

=============

Some of the design decisions apparent above are arguable.

What about stack overflow/underflow?

     GDB should be able to query the target to discover its stack size.

     Given that information, GDB can determine at translation time

     whether a given expression will overflow the stack.  But this spec

     isn't about what kinds of error-checking GDB ought to do.

Why are you doing everything in LONGEST?

     Speed isn't important, but agent code size is; using LONGEST

     brings in a bunch of support code to do things like division, etc.

     So this is a serious concern.

     First, note that you don't need different bytecodes for different

     operand sizes.  You can generate code without _knowing_ how big the

     stack elements actually are on the target.  If the target only

     supports 32-bit ints, and you don't send any 64-bit bytecodes,

     everything just works.  The observation here is that the MIPS and

     the Alpha have only fixed-size registers, and you can still get

     C's semantics even though most instructions only operate on

     full-sized words.  You just need to make sure everything is

     properly sign-extended at the right times.  So there is no need

     for 32- and 64-bit variants of the bytecodes.  Just implement

     everything using the largest size you support.

     GDB should certainly check to see what sizes the target supports,

     so the user can get an error earlier, rather than later.  But this

     information is not necessary for correctness.

Why don't you have `>' or `<=' operators?

     I want to keep the interpreter small, and we don't need them.  We

     can combine the `less_' opcodes with `log_not', and swap the order

     of the operands, yielding all four asymmetrical comparison

     operators.  For example, `(x <= y)' is `! (x > y)', which is `! (y

     < x)'.

Why do you have `log_not'?

Why do you have `ext'?

Why do you have `zero_ext'?

     These are all easily synthesized from other instructions, but I

     expect them to be used frequently, and they're simple, so I

     include them to keep bytecode strings short.

     `log_not' is equivalent to `const8 0 equal'; it's used in half the

     relational operators.

     `ext N' is equivalent to `const8 S-N lsh const8 S-N rsh_signed',

     where S is the size of the stack elements; it follows `refM' and

     REG bytecodes when the value should be signed.  See the next

     bulleted item.

     `zero_ext N' is equivalent to `constM MASK log_and'; it's used

     whenever we push the value of a register, because we can't assume

     the upper bits of the register aren't garbage.

Why not have sign-extending variants of the `ref' operators?

     Because that would double the number of `ref' operators, and we

     need the `ext' bytecode anyway for accessing bitfields.

Why not have constant-address variants of the `ref' operators?

     Because that would double the number of `ref' operators again, and

     `const32 ADDRESS ref32' is only one byte longer.

Why do the `refN' operators have to support unaligned fetches?

     GDB will generate bytecode that fetches multi-byte values at

     unaligned addresses whenever the executable's debugging

     information tells it to.  Furthermore, GDB does not know the value

     the pointer will have when GDB generates the bytecode, so it

     cannot determine whether a particular fetch will be aligned or not.

     In particular, structure bitfields may be several bytes long, but

     follow no alignment rules; members of packed structures are not

     necessarily aligned either.

     In general, there are many cases where unaligned references occur

     in correct C code, either at the programmer's explicit request, or

     at the compiler's discretion.  Thus, it is simpler to make the GDB

     agent bytecodes work correctly in all circumstances than to make

     GDB guess in each case whether the compiler did the usual thing.

Why are there no side-effecting operators?

     Because our current client doesn't want them?  That's a cheap

     answer.  I think the real answer is that I'm afraid of

     implementing function calls.  We should re-visit this issue after

     the present contract is delivered.

Why aren't the `goto' ops PC-relative?

     The interpreter has the base address around anyway for PC bounds

     checking, and it seemed simpler.

Why is there only one offset size for the `goto' ops?

     Offsets are currently sixteen bits.  I'm not happy with this

     situation either:

     Suppose we have multiple branch ops with different offset sizes.

     As I generate code left-to-right, all my jumps are forward jumps

     (there are no loops in expressions), so I never know the target

     when I emit the jump opcode.  Thus, I have to either always assume

     the largest offset size, or do jump relaxation on the code after I

     generate it, which seems like a big waste of time.

     I can imagine a reasonable expression being longer than 256 bytes.

     I can't imagine one being longer than 64k.  Thus, we need 16-bit

     offsets.  This kind of reasoning is so bogus, but relaxation is

     pathetic.

     The other approach would be to generate code right-to-left.  Then

     I'd always know my offset size.  That might be fun.

Where is the function call bytecode?

     When we add side-effects, we should add this.

Why does the `reg' bytecode take a 16-bit register number?

     Intel's IA-64 architecture has 128 general-purpose registers, and

     128 floating-point registers, and I'm sure it has some random

     control registers.

Why do we need `trace' and `trace_quick'?

     Because GDB needs to record all the memory contents and registers

     an expression touches.  If the user wants to evaluate an expression

     `x->y->z', the agent must record the values of `x' and `x->y' as

     well as the value of `x->y->z'.

Don't the `trace' bytecodes make the interpreter less general?

     They do mean that the interpreter contains special-purpose code,

     but that doesn't mean the interpreter can only be used for that

     purpose.  If an expression doesn't use the `trace' bytecodes, they

     don't get in its way.

Why doesn't `trace_quick' consume its arguments the way everything else does?

     In general, you do want your operators to consume their arguments;

     it's consistent, and generally reduces the amount of stack

     rearrangement necessary.  However, `trace_quick' is a kludge to

     save space; it only exists so we needn't write `dup const8 SIZE

     trace' before every memory reference.  Therefore, it's okay for it

     not to consume its arguments; it's meant for a specific context in

     which we know exactly what it should do with the stack.  If we're

     going to have a kludge, it should be an effective kludge.

Why does `trace16' exist?

     That opcode was added by the customer that contracted Cygnus for

     the data tracing work.  I personally think it is unnecessary;

     objects that large will be quite rare, so it is okay to use `dup

     const16 SIZE trace' in those cases.

     Whatever we decide to do with `trace16', we should at least leave

     opcode 0x30 reserved, to remain compatible with the customer who

     added it.

File: gdb.info,  Node: Target Descriptions,  Next: Copying,  Prev: Agent Expressions,  Up: Top

Appendix F Target Descriptions

******************************

*Warning:* target descriptions are still under active development, and

the contents and format may change between GDB releases.  The format is

expected to stabilize in the future.

   One of the challenges of using GDB to debug embedded systems is that

there are so many minor variants of each processor architecture in use.

It is common practice for vendors to start with a standard processor

core -- ARM, PowerPC, or MIPS, for example -- and then make changes to

adapt it to a particular market niche.  Some architectures have

hundreds of variants, available from dozens of vendors.  This leads to

a number of problems:

   * With so many different customized processors, it is difficult for

     the GDB maintainers to keep up with the changes.

   * Since individual variants may have short lifetimes or limited

     audiences, it may not be worthwhile to carry information about

     every variant in the GDB source tree.

   * When GDB does support the architecture of the embedded system at

     hand, the task of finding the correct architecture name to give the

     `set architecture' command can be error-prone.

   To address these problems, the GDB remote protocol allows a target

system to not only identify itself to GDB, but to actually describe its

own features.  This lets GDB support processor variants it has never

seen before -- to the extent that the descriptions are accurate, and

that GDB understands them.

   GDB must be linked with the Expat library to support XML target

descriptions.  *Note Expat::.

* Menu:

* Retrieving Descriptions::         How descriptions are fetched from a target.

* Target Description Format::       The contents of a target description.

* Predefined Target Types::         Standard types available for target

                                    descriptions.

* Standard Target Features::        Features GDB knows about.

File: gdb.info,  Node: Retrieving Descriptions,  Next: Target Description Format,  Up: Target Descriptions

F.1 Retrieving Descriptions

===========================

Target descriptions can be read from the target automatically, or

specified by the user manually.  The default behavior is to read the

description from the target.  GDB retrieves it via the remote protocol

using `qXfer' requests (*note qXfer: General Query Packets.).  The

ANNEX in the `qXfer' packet will be `target.xml'.  The contents of the

`target.xml' annex are an XML document, of the form described in *Note

Target Description Format::.

   Alternatively, you can specify a file to read for the target

description.  If a file is set, the target will not be queried.  The

commands to specify a file are:

`set tdesc filename PATH'

     Read the target description from PATH.

`unset tdesc filename'

     Do not read the XML target description from a file.  GDB will use

     the description supplied by the current target.

`show tdesc filename'

     Show the filename to read for a target description, if any.

File: gdb.info,  Node: Target Description Format,  Next: Predefined Target Types,  Prev: Retrieving Descriptions,  Up: Target Descriptions

F.2 Target Description Format

=============================

A target description annex is an XML (http://www.w3.org/XML/) document

which complies with the Document Type Definition provided in the GDB

sources in `gdb/features/gdb-target.dtd'.  This means you can use

generally available tools like `xmllint' to check that your feature

descriptions are well-formed and valid.  However, to help people

unfamiliar with XML write descriptions for their targets, we also

describe the grammar here.

   Target descriptions can identify the architecture of the remote

target and (for some architectures) provide information about custom

register sets.  GDB can use this information to autoconfigure for your

target, or to warn you if you connect to an unsupported target.

   Here is a simple target description:

       i386:x86-64

This minimal description only says that the target uses the x86-64

architecture.

   A target description has the following overall form, with [ ] marking

optional elements and ... marking repeatable elements.  The elements

are explained further below.

       [ARCHITECTURE]

       [FEATURE...]

The description is generally insensitive to whitespace and line breaks,

under the usual common-sense rules.  The XML version declaration and

document type declaration can generally be omitted (GDB does not

require them), but specifying them may be useful for XML validation

tools.  The `version' attribute for `' may also be omitted, but

we recommend including it; if future versions of GDB use an incompatible

revision of `gdb-target.dtd', they will detect and report the version

mismatch.

F.2.1 Inclusion

---------------

It can sometimes be valuable to split a target description up into

several different annexes, either for organizational purposes, or to

share files between different possible target descriptions.  You can

divide a description into multiple files by replacing any element of

the target description with an inclusion directive of the form:

When GDB encounters an element of this form, it will retrieve the named

XML DOCUMENT, and replace the inclusion directive with the contents of

that document.  If the current description was read using `qXfer', then

so will be the included document; DOCUMENT will be interpreted as the

name of an annex.  If the current description was read from a file, GDB

will look for DOCUMENT as a file in the same directory where it found

the original description.

F.2.2 Architecture

------------------

An `' element has this form:

       ARCH

   ARCH is an architecture name from the same selection accepted by

`set architecture' (*note Specifying a Debugging Target: Targets.).

F.2.3 Features

--------------

Each `' describes some logical portion of the target system.

Features are currently used to describe available CPU registers and the

types of their contents.  A `' element has this form:

       [TYPE...]

       REG...

Each feature's name should be unique within the description.  The name

of a feature does not matter unless GDB has some special knowledge of

the contents of that feature; if it does, the feature should have its

standard name.  *Note Standard Target Features::.

F.2.4 Types

-----------

Any register's value is a collection of bits which GDB must interpret.

The default interpretation is a two's complement integer, but other

types can be requested by name in the register description.  Some

predefined types are provided by GDB (*note Predefined Target Types::),

and the description can define additional composite types.

   Each type element must have an `id' attribute, which gives a unique

(within the containing `') name to the type.  Types must be

defined before they are used.

   Some targets offer vector registers, which can be treated as arrays

of scalar elements.  These types are written as `' elements,

specifying the array element type, TYPE, and the number of elements,

COUNT:

   If a register's value is usefully viewed in multiple ways, define it

with a union type containing the useful representations.  The `'

element contains one or more `' elements, each of which has a

NAME and a TYPE:

       ...

F.2.5 Registers

---------------

Each register is represented as an element with this form:

          bitsize="SIZE"

          [regnum="NUM"]

          [save-restore="SAVE-RESTORE"]

          [type="TYPE"]

          [group="GROUP"]/>

The components are as follows:

NAME

     The register's name; it must be unique within the target

     description.

BITSIZE

     The register's size, in bits.

REGNUM

     The register's number.  If omitted, a register's number is one

     greater than that of the previous register (either in the current

     feature or in a preceeding feature); the first register in the

     target description defaults to zero.  This register number is used

     to read or write the register; e.g. it is used in the remote `p'

     and `P' packets, and registers appear in the `g' and `G' packets

     in order of increasing register number.

SAVE-RESTORE

     Whether the register should be preserved across inferior function

     calls; this must be either `yes' or `no'.  The default is `yes',

     which is appropriate for most registers except for some system

     control registers; this is not related to the target's ABI.

TYPE

     The type of the register.  TYPE may be a predefined type, a type

     defined in the current feature, or one of the special types `int'

     and `float'.  `int' is an integer type of the correct size for

     BITSIZE, and `float' is a floating point type (in the

     architecture's normal floating point format) of the correct size

     for BITSIZE.  The default is `int'.

GROUP

     The register group to which this register belongs.  GROUP must be

     either `general', `float', or `vector'.  If no GROUP is specified,

     GDB will not display the register in `info registers'.

File: gdb.info,  Node: Predefined Target Types,  Next: Standard Target Features,  Prev: Target Description Format,  Up: Target Descriptions

F.3 Predefined Target Types

===========================

Type definitions in the self-description can build up composite types

from basic building blocks, but can not define fundamental types.

Instead, standard identifiers are provided by GDB for the fundamental

types.  The currently supported types are:

`int8'

`int16'

`int32'

`int64'

`int128'

     Signed integer types holding the specified number of bits.

`uint8'

`uint16'

`uint32'

`uint64'

`uint128'

     Unsigned integer types holding the specified number of bits.

`code_ptr'

`data_ptr'

     Pointers to unspecified code and data.  The program counter and

     any dedicated return address register may be marked as code

     pointers; printing a code pointer converts it into a symbolic

     address.  The stack pointer and any dedicated address registers

     may be marked as data pointers.

`ieee_single'

     Single precision IEEE floating point.

`ieee_double'

     Double precision IEEE floating point.

`arm_fpa_ext'

     The 12-byte extended precision format used by ARM FPA registers.

File: gdb.info,  Node: Standard Target Features,  Prev: Predefined Target Types,  Up: Target Descriptions

F.4 Standard Target Features

============================

A target description must contain either no registers or all the

target's registers.  If the description contains no registers, then GDB

will assume a default register layout, selected based on the

architecture.  If the description contains any registers, the default

layout will not be used; the standard registers must be described in