URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [gnu-src/] [gdb-6.8/] [gdb/] [ser-go32.c] - Blame information for rev 205

Go to most recent revision | Details | Compare with Previous | View Log

/* Remote serial interface for local (hardwired) serial ports for GO32.
   Copyright (C) 1992, 1993, 2000, 2001, 2007, 2008
   Free Software Foundation, Inc.
 
   Contributed by Nigel Stephens, Algorithmics Ltd. (nigel@algor.co.uk).
 
   This version uses DPMI interrupts to handle buffered i/o
   without the separate "asynctsr" program.
 
   This file is part of GDB.
 
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3 of the License, or
   (at your option) any later version.
 
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
 
   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
#include "defs.h"
#include "gdbcmd.h"
#include "serial.h"
#include "gdb_string.h"
 
 
/*
 * NS16550 UART registers
 */
 
#define COM1ADDR        0x3f8
#define COM2ADDR        0x2f8
#define COM3ADDR        0x3e8
#define COM4ADDR        0x3e0
 
#define com_data        0        /* data register (R/W) */
#define com_dlbl        0        /* divisor latch low (W) */
#define com_ier         1       /* interrupt enable (W) */
#define com_dlbh        1       /* divisor latch high (W) */
#define com_iir         2       /* interrupt identification (R) */
#define com_fifo        2       /* FIFO control (W) */
#define com_lctl        3       /* line control register (R/W) */
#define com_cfcr        3       /* line control register (R/W) */
#define com_mcr         4       /* modem control register (R/W) */
#define com_lsr         5       /* line status register (R/W) */
#define com_msr         6       /* modem status register (R/W) */
 
/*
 * Constants for computing 16 bit baud rate divisor (lower byte
 * in com_dlbl, upper in com_dlbh) from 1.8432MHz crystal.  Divisor is
 * 1.8432 MHz / (16 * X) for X bps.  If the baud rate can't be set
 * to within +- (desired_rate*SPEED_TOLERANCE/1000) bps, we fail.
 */
#define COMTICK         (1843200/16)
#define SPEED_TOLERANCE 30      /* thousandths; real == desired +- 3.0% */
 
/* interrupt enable register */
#define IER_ERXRDY      0x1     /* int on rx ready */
#define IER_ETXRDY      0x2     /* int on tx ready */
#define IER_ERLS        0x4     /* int on line status change */
#define IER_EMSC        0x8     /* int on modem status change */
 
/* interrupt identification register */
#define IIR_FIFO_MASK   0xc0    /* set if FIFOs are enabled */
#define IIR_IMASK       0xf     /* interrupt cause mask */
#define IIR_NOPEND      0x1     /* nothing pending */
#define IIR_RLS         0x6     /* receive line status */
#define IIR_RXRDY       0x4     /* receive ready */
#define IIR_RXTOUT      0xc     /* receive timeout */
#define IIR_TXRDY       0x2     /* transmit ready */
#define IIR_MLSC        0x0     /* modem status */
 
 
/* fifo control register */
#define FIFO_ENABLE     0x01    /* enable fifo */
#define FIFO_RCV_RST    0x02    /* reset receive fifo */
#define FIFO_XMT_RST    0x04    /* reset transmit fifo */
#define FIFO_DMA_MODE   0x08    /* enable dma mode */
#define FIFO_TRIGGER_1  0x00    /* trigger at 1 char */
#define FIFO_TRIGGER_4  0x40    /* trigger at 4 chars */
#define FIFO_TRIGGER_8  0x80    /* trigger at 8 chars */
#define FIFO_TRIGGER_14 0xc0    /* trigger at 14 chars */
 
/* character format control register */
#define CFCR_DLAB       0x80    /* divisor latch */
#define CFCR_SBREAK     0x40    /* send break */
#define CFCR_PZERO      0x30    /* zero parity */
#define CFCR_PONE       0x20    /* one parity */
#define CFCR_PEVEN      0x10    /* even parity */
#define CFCR_PODD       0x00    /* odd parity */
#define CFCR_PENAB      0x08    /* parity enable */
#define CFCR_STOPB      0x04    /* 2 stop bits */
#define CFCR_8BITS      0x03    /* 8 data bits */
#define CFCR_7BITS      0x02    /* 7 data bits */
#define CFCR_6BITS      0x01    /* 6 data bits */
#define CFCR_5BITS      0x00    /* 5 data bits */
 
/* modem control register */
#define MCR_LOOPBACK    0x10    /* loopback */
#define MCR_IENABLE     0x08    /* output 2 = int enable */
#define MCR_DRS         0x04    /* output 1 = xxx */
#define MCR_RTS         0x02    /* enable RTS */
#define MCR_DTR         0x01    /* enable DTR */
 
/* line status register */
#define LSR_RCV_FIFO    0x80    /* error in receive fifo */
#define LSR_TSRE        0x40    /* transmitter empty */
#define LSR_TXRDY       0x20    /* transmitter ready */
#define LSR_BI          0x10    /* break detected */
#define LSR_FE          0x08    /* framing error */
#define LSR_PE          0x04    /* parity error */
#define LSR_OE          0x02    /* overrun error */
#define LSR_RXRDY       0x01    /* receiver ready */
#define LSR_RCV_MASK    0x1f
 
/* modem status register */
#define MSR_DCD         0x80
#define MSR_RI          0x40
#define MSR_DSR         0x20
#define MSR_CTS         0x10
#define MSR_DDCD        0x08
#define MSR_TERI        0x04
#define MSR_DDSR        0x02
#define MSR_DCTS        0x01
 
#include <time.h>
#include <dos.h>
#include <go32.h>
#include <dpmi.h>
typedef unsigned long u_long;
 
/* 16550 rx fifo trigger point */
#define FIFO_TRIGGER    FIFO_TRIGGER_4
 
/* input buffer size */
#define CBSIZE  4096
 
#define RAWHZ   18
 
#ifdef DOS_STATS
#define CNT_RX          16
#define CNT_TX          17
#define CNT_STRAY       18
#define CNT_ORUN        19
#define NCNT            20
 
static int intrcnt;
static int cnts[NCNT];
static char *cntnames[NCNT] =
{
  /* h/w interrupt counts. */
  "mlsc", "nopend", "txrdy", "?3",
  "rxrdy", "?5", "rls", "?7",
  "?8", "?9", "?a", "?b",
  "rxtout", "?d", "?e", "?f",
  /* s/w counts. */
  "rxcnt", "txcnt", "stray", "swoflo"
};
 
#define COUNT(x) cnts[x]++
#else
#define COUNT(x)
#endif
 
/* Main interrupt controller port addresses. */
#define ICU_BASE        0x20
#define ICU_OCW2        (ICU_BASE + 0)
#define ICU_MASK        (ICU_BASE + 1)
 
/* Original interrupt controller mask register. */
unsigned char icu_oldmask;
 
/* Maximum of 8 interrupts (we don't handle the slave icu yet). */
#define NINTR   8
 
static struct intrupt
  {
    char inuse;
    struct dos_ttystate *port;
    _go32_dpmi_seginfo old_rmhandler;
    _go32_dpmi_seginfo old_pmhandler;
    _go32_dpmi_seginfo new_rmhandler;
    _go32_dpmi_seginfo new_pmhandler;
    _go32_dpmi_registers regs;
  }
intrupts[NINTR];
 
 
static struct dos_ttystate
  {
    int base;
    int irq;
    int refcnt;
    struct intrupt *intrupt;
    int fifo;
    int baudrate;
    unsigned char cbuf[CBSIZE];
    unsigned int first;
    unsigned int count;
    int txbusy;
    unsigned char old_mcr;
    int ferr;
    int perr;
    int oflo;
    int msr;
  }
ports[4] =
{
  {
    COM1ADDR, 4, 0, NULL, 0, 0, "", 0, 0, 0, 0, 0, 0, 0, 0
  }
  ,
  {
    COM2ADDR, 3, 0, NULL, 0, 0, "", 0, 0, 0, 0, 0, 0, 0, 0
  }
  ,
  {
    COM3ADDR, 4, 0, NULL, 0, 0, "", 0, 0, 0, 0, 0, 0, 0, 0
  }
  ,
  {
    COM4ADDR, 3, 0, NULL, 0, 0, "", 0, 0, 0, 0, 0, 0, 0, 0
  }
};
 
static int dos_open (struct serial *scb, const char *name);
static void dos_raw (struct serial *scb);
static int dos_readchar (struct serial *scb, int timeout);
static int dos_setbaudrate (struct serial *scb, int rate);
static int dos_write (struct serial *scb, const char *str, int len);
static void dos_close (struct serial *scb);
static serial_ttystate dos_get_tty_state (struct serial *scb);
static int dos_set_tty_state (struct serial *scb, serial_ttystate state);
static int dos_baudconv (int rate);
 
#define inb(p,a)        inportb((p)->base + (a))
#define outb(p,a,v)     outportb((p)->base + (a), (v))
#define disable()       asm volatile ("cli");
#define enable()        asm volatile ("sti");
 
 
static int
dos_getc (volatile struct dos_ttystate *port)
{
  int c;
 
  if (port->count == 0)
    return -1;
 
  c = port->cbuf[port->first];
  disable ();
  port->first = (port->first + 1) & (CBSIZE - 1);
  port->count--;
  enable ();
  return c;
}
 
 
static int
dos_putc (int c, struct dos_ttystate *port)
{
  if (port->count >= CBSIZE - 1)
    return -1;
  port->cbuf[(port->first + port->count) & (CBSIZE - 1)] = c;
  port->count++;
  return 0;
}
 
 
 
static void
dos_comisr (int irq)
{
  struct dos_ttystate *port;
  unsigned char iir, lsr, c;
 
  disable ();                   /* Paranoia */
  outportb (ICU_OCW2, 0x20);    /* End-Of-Interrupt */
#ifdef DOS_STATS
  ++intrcnt;
#endif
 
  port = intrupts[irq].port;
  if (!port)
    {
      COUNT (CNT_STRAY);
      return;                   /* not open */
    }
 
  while (1)
    {
      iir = inb (port, com_iir) & IIR_IMASK;
      switch (iir)
        {
 
        case IIR_RLS:
          lsr = inb (port, com_lsr);
          goto rx;
 
        case IIR_RXTOUT:
        case IIR_RXRDY:
          lsr = 0;
 
        rx:
          do
            {
              c = inb (port, com_data);
              if (lsr & (LSR_BI | LSR_FE | LSR_PE | LSR_OE))
                {
                  if (lsr & (LSR_BI | LSR_FE))
                    port->ferr++;
                  else if (lsr & LSR_PE)
                    port->perr++;
                  if (lsr & LSR_OE)
                    port->oflo++;
                }
 
              if (dos_putc (c, port) < 0)
                {
                  COUNT (CNT_ORUN);
                }
              else
                {
                  COUNT (CNT_RX);
                }
            }
          while ((lsr = inb (port, com_lsr)) & LSR_RXRDY);
          break;
 
        case IIR_MLSC:
          /* could be used to flowcontrol Tx */
          port->msr = inb (port, com_msr);
          break;
 
        case IIR_TXRDY:
          port->txbusy = 0;
          break;
 
        case IIR_NOPEND:
          /* no more pending interrupts, all done */
          return;
 
        default:
          /* unexpected interrupt, ignore */
          break;
        }
      COUNT (iir);
    }
}
 
#define ISRNAME(x) dos_comisr##x
#define ISR(x) static void ISRNAME(x)(void) {dos_comisr(x);}
 
ISR (0) ISR (1) ISR (2) ISR (3) /* OK */
ISR (4) ISR (5) ISR (6) ISR (7) /* OK */
 
typedef void (*isr_t) (void);
 
static isr_t isrs[NINTR] =
  {
       ISRNAME (0), ISRNAME (1), ISRNAME (2), ISRNAME (3),
       ISRNAME (4), ISRNAME (5), ISRNAME (6), ISRNAME (7)
  };
 
 
 
static struct intrupt *
dos_hookirq (unsigned int irq)
{
  struct intrupt *intr;
  unsigned int vec;
  isr_t isr;
 
  if (irq >= NINTR)
    return 0;
 
  intr = &intrupts[irq];
  if (intr->inuse)
    return 0;
 
  vec = 0x08 + irq;
  isr = isrs[irq];
 
  /* setup real mode handler */
  _go32_dpmi_get_real_mode_interrupt_vector (vec, &intr->old_rmhandler);
 
  intr->new_rmhandler.pm_selector = _go32_my_cs ();
  intr->new_rmhandler.pm_offset = (u_long) isr;
  if (_go32_dpmi_allocate_real_mode_callback_iret (&intr->new_rmhandler,
                                                   &intr->regs))
    {
      return 0;
    }
 
  if (_go32_dpmi_set_real_mode_interrupt_vector (vec, &intr->new_rmhandler))
    {
      return 0;
    }
 
  /* setup protected mode handler */
  _go32_dpmi_get_protected_mode_interrupt_vector (vec, &intr->old_pmhandler);
 
  intr->new_pmhandler.pm_selector = _go32_my_cs ();
  intr->new_pmhandler.pm_offset = (u_long) isr;
  _go32_dpmi_allocate_iret_wrapper (&intr->new_pmhandler);
 
  if (_go32_dpmi_set_protected_mode_interrupt_vector (vec,
                                                      &intr->new_pmhandler))
    {
      return 0;
    }
 
  /* setup interrupt controller mask */
  disable ();
  outportb (ICU_MASK, inportb (ICU_MASK) & ~(1 << irq));
  enable ();
 
  intr->inuse = 1;
  return intr;
}
 
 
static void
dos_unhookirq (struct intrupt *intr)
{
  unsigned int irq, vec;
  unsigned char mask;
 
  irq = intr - intrupts;
  vec = 0x08 + irq;
 
  /* restore old interrupt mask bit */
  mask = 1 << irq;
  disable ();
  outportb (ICU_MASK, inportb (ICU_MASK) | (mask & icu_oldmask));
  enable ();
 
  /* remove real mode handler */
  _go32_dpmi_set_real_mode_interrupt_vector (vec, &intr->old_rmhandler);
  _go32_dpmi_free_real_mode_callback (&intr->new_rmhandler);
 
  /* remove protected mode handler */
  _go32_dpmi_set_protected_mode_interrupt_vector (vec, &intr->old_pmhandler);
  _go32_dpmi_free_iret_wrapper (&intr->new_pmhandler);
  intr->inuse = 0;
}
 
 
 
static int
dos_open (struct serial *scb, const char *name)
{
  struct dos_ttystate *port;
  int fd, i;
 
  if (strncasecmp (name, "/dev/", 5) == 0)
    name += 5;
  else if (strncasecmp (name, "\\dev\\", 5) == 0)
    name += 5;
 
  if (strlen (name) != 4 || strncasecmp (name, "com", 3) != 0)
    {
      errno = ENOENT;
      return -1;
    }
 
  if (name[3] < '1' || name[3] > '4')
    {
      errno = ENOENT;
      return -1;
    }
 
  /* FIXME: this is a Bad Idea (tm)!  One should *never* invent file
     handles, since they might be already used by other files/devices.
     The Right Way to do this is to create a real handle by dup()'ing
     some existing one.  */
  fd = name[3] - '1';
  port = &ports[fd];
  if (port->refcnt++ > 0)
    {
      /* Device already opened another user.  Just point at it. */
      scb->fd = fd;
      return 0;
    }
 
  /* force access to ID reg */
  outb (port, com_cfcr, 0);
  outb (port, com_iir, 0);
  for (i = 0; i < 17; i++)
    {
      if ((inb (port, com_iir) & 0x38) == 0)
        goto ok;
      (void) inb (port, com_data);      /* clear recv */
    }
  errno = ENODEV;
  return -1;
 
ok:
  /* disable all interrupts in chip */
  outb (port, com_ier, 0);
 
  /* tentatively enable 16550 fifo, and see if it responds */
  outb (port, com_fifo,
        FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER);
  sleep (1);
  port->fifo = ((inb (port, com_iir) & IIR_FIFO_MASK) == IIR_FIFO_MASK);
 
  /* clear pending status reports. */
  (void) inb (port, com_lsr);
  (void) inb (port, com_msr);
 
  /* enable external interrupt gate (to avoid floating IRQ) */
  outb (port, com_mcr, MCR_IENABLE);
 
  /* hook up interrupt handler and initialise icu */
  port->intrupt = dos_hookirq (port->irq);
  if (!port->intrupt)
    {
      outb (port, com_mcr, 0);
      outb (port, com_fifo, 0);
      errno = ENODEV;
      return -1;
    }
 
  disable ();
 
  /* record port */
  port->intrupt->port = port;
  scb->fd = fd;
 
  /* clear rx buffer, tx busy flag and overflow count */
  port->first = port->count = 0;
  port->txbusy = 0;
  port->oflo = 0;
 
  /* set default baud rate and mode: 9600,8,n,1 */
  i = dos_baudconv (port->baudrate = 9600);
  outb (port, com_cfcr, CFCR_DLAB);
  outb (port, com_dlbl, i & 0xff);
  outb (port, com_dlbh, i >> 8);
  outb (port, com_cfcr, CFCR_8BITS);
 
  /* enable all interrupts */
  outb (port, com_ier, IER_ETXRDY | IER_ERXRDY | IER_ERLS | IER_EMSC);
 
  /* enable DTR & RTS */
  outb (port, com_mcr, MCR_DTR | MCR_RTS | MCR_IENABLE);
 
  enable ();
 
  return 0;
}
 
 
static void
dos_close (struct serial *scb)
{
  struct dos_ttystate *port;
  struct intrupt *intrupt;
 
  if (!scb)
    return;
 
  port = &ports[scb->fd];
 
  if (port->refcnt-- > 1)
    return;
 
  if (!(intrupt = port->intrupt))
    return;
 
  /* disable interrupts, fifo, flow control */
  disable ();
  port->intrupt = 0;
  intrupt->port = 0;
  outb (port, com_fifo, 0);
  outb (port, com_ier, 0);
  enable ();
 
  /* unhook handler, and disable interrupt gate */
  dos_unhookirq (intrupt);
  outb (port, com_mcr, 0);
 
  /* Check for overflow errors */
  if (port->oflo)
    {
      fprintf_unfiltered (gdb_stderr,
                          "Serial input overruns occurred.\n");
      fprintf_unfiltered (gdb_stderr, "This system %s handle %d baud.\n",
                          port->fifo ? "cannot" : "needs a 16550 to",
                          port->baudrate);
    }
}
 
 
 
static int
dos_noop (struct serial *scb)
{
  return 0;
}
 
static void
dos_raw (struct serial *scb)
{
  /* Always in raw mode */
}
 
static int
dos_readchar (struct serial *scb, int timeout)
{
  struct dos_ttystate *port = &ports[scb->fd];
  long then;
  int c;
 
  then = rawclock () + (timeout * RAWHZ);
  while ((c = dos_getc (port)) < 0)
    {
      if (timeout >= 0 && (rawclock () - then) >= 0)
        return SERIAL_TIMEOUT;
    }
 
  return c;
}
 
 
static serial_ttystate
dos_get_tty_state (struct serial *scb)
{
  struct dos_ttystate *port = &ports[scb->fd];
  struct dos_ttystate *state;
 
  /* Are they asking about a port we opened?  */
  if (port->refcnt <= 0)
    {
      /* We've never heard about this port.  We should fail this call,
         unless they are asking about one of the 3 standard handles,
         in which case we pretend the handle was open by us if it is
         connected to a terminal device.  This is beacuse Unix
         terminals use the serial interface, so GDB expects the
         standard handles to go through here.  */
      if (scb->fd >= 3 || !isatty (scb->fd))
        return NULL;
    }
 
  state = (struct dos_ttystate *) xmalloc (sizeof *state);
  *state = *port;
  return (serial_ttystate) state;
}
 
static int
dos_set_tty_state (struct serial *scb, serial_ttystate ttystate)
{
  struct dos_ttystate *state;
 
  state = (struct dos_ttystate *) ttystate;
  dos_setbaudrate (scb, state->baudrate);
  return 0;
}
 
static int
dos_noflush_set_tty_state (struct serial *scb, serial_ttystate new_ttystate,
                           serial_ttystate old_ttystate)
{
  struct dos_ttystate *state;
 
  state = (struct dos_ttystate *) new_ttystate;
  dos_setbaudrate (scb, state->baudrate);
  return 0;
}
 
static int
dos_flush_input (struct serial *scb)
{
  struct dos_ttystate *port = &ports[scb->fd];
  disable ();
  port->first = port->count = 0;
  if (port->fifo)
    outb (port, com_fifo, FIFO_ENABLE | FIFO_RCV_RST | FIFO_TRIGGER);
  enable ();
  return 0;
}
 
static void
dos_print_tty_state (struct serial *scb, serial_ttystate ttystate,
                     struct ui_file *stream)
{
  /* Nothing to print */
  return;
}
 
static int
dos_baudconv (int rate)
{
  long x, err;
 
  if (rate <= 0)
    return -1;
 
#define divrnd(n, q)    (((n) * 2 / (q) + 1) / 2) /* divide and round off */
  x = divrnd (COMTICK, rate);
  if (x <= 0)
    return -1;
 
  err = divrnd (1000 * COMTICK, x * rate) - 1000;
  if (err < 0)
    err = -err;
  if (err > SPEED_TOLERANCE)
    return -1;
#undef divrnd
  return x;
}
 
 
static int
dos_setbaudrate (struct serial *scb, int rate)
{
  struct dos_ttystate *port = &ports[scb->fd];
 
  if (port->baudrate != rate)
    {
      int x;
      unsigned char cfcr;
 
      x = dos_baudconv (rate);
      if (x <= 0)
        {
          fprintf_unfiltered (gdb_stderr, "%d: impossible baudrate\n", rate);
          errno = EINVAL;
          return -1;
        }
 
      disable ();
      cfcr = inb (port, com_cfcr);
 
      outb (port, com_cfcr, CFCR_DLAB);
      outb (port, com_dlbl, x & 0xff);
      outb (port, com_dlbh, x >> 8);
      outb (port, com_cfcr, cfcr);
      port->baudrate = rate;
      enable ();
    }
 
  return 0;
}
 
static int
dos_setstopbits (struct serial *scb, int num)
{
  struct dos_ttystate *port = &ports[scb->fd];
  unsigned char cfcr;
 
  disable ();
  cfcr = inb (port, com_cfcr);
 
  switch (num)
    {
    case SERIAL_1_STOPBITS:
      outb (port, com_cfcr, cfcr & ~CFCR_STOPB);
      break;
    case SERIAL_1_AND_A_HALF_STOPBITS:
    case SERIAL_2_STOPBITS:
      outb (port, com_cfcr, cfcr | CFCR_STOPB);
      break;
    default:
      enable ();
      return 1;
    }
  enable ();
 
  return 0;
}
 
static int
dos_write (struct serial *scb, const char *str, int len)
{
  volatile struct dos_ttystate *port = &ports[scb->fd];
  int fifosize = port->fifo ? 16 : 1;
  long then;
  int cnt;
 
  while (len > 0)
    {
      /* send the data, fifosize bytes at a time */
      cnt = fifosize > len ? len : fifosize;
      port->txbusy = 1;
      /* Francisco Pastor <fpastor.etra-id@etra.es> says OUTSB messes
         up the communications with UARTs with FIFOs.  */
#ifdef UART_FIFO_WORKS
      outportsb (port->base + com_data, str, cnt);
      str += cnt;
      len -= cnt;
#else
      for ( ; cnt > 0; cnt--, len--)
        outportb (port->base + com_data, *str++);
#endif
#ifdef DOS_STATS
      cnts[CNT_TX] += cnt;
#endif
      /* wait for transmission to complete (max 1 sec) */
      then = rawclock () + RAWHZ;
      while (port->txbusy)
        {
          if ((rawclock () - then) >= 0)
            {
              errno = EIO;
              return SERIAL_ERROR;
            }
        }
    }
  return 0;
}
 
 
static int
dos_sendbreak (struct serial *scb)
{
  volatile struct dos_ttystate *port = &ports[scb->fd];
  unsigned char cfcr;
  long then;
 
  cfcr = inb (port, com_cfcr);
  outb (port, com_cfcr, cfcr | CFCR_SBREAK);
 
  /* 0.25 sec delay */
  then = rawclock () + RAWHZ / 4;
  while ((rawclock () - then) < 0)
    continue;
 
  outb (port, com_cfcr, cfcr);
  return 0;
}
 
 
static struct serial_ops dos_ops =
{
  "hardwire",
  0,
  dos_open,
  dos_close,
  dos_readchar,
  dos_write,
  dos_noop,                     /* flush output */
  dos_flush_input,
  dos_sendbreak,
  dos_raw,
  dos_get_tty_state,
  dos_set_tty_state,
  dos_print_tty_state,
  dos_noflush_set_tty_state,
  dos_setbaudrate,
  dos_setstopbits,
  dos_noop,                     /* wait for output to drain */
  (void (*)(struct serial *, int))NULL  /* change into async mode */
};
 
 
static void
dos_info (char *arg, int from_tty)
{
  struct dos_ttystate *port;
#ifdef DOS_STATS
  int i;
#endif
 
  for (port = ports; port < &ports[4]; port++)
    {
      if (port->baudrate == 0)
        continue;
      printf_filtered ("Port:\tCOM%ld (%sactive)\n", (long)(port - ports) + 1,
                       port->intrupt ? "" : "not ");
      printf_filtered ("Addr:\t0x%03x (irq %d)\n", port->base, port->irq);
      printf_filtered ("16550:\t%s\n", port->fifo ? "yes" : "no");
      printf_filtered ("Speed:\t%d baud\n", port->baudrate);
      printf_filtered ("Errs:\tframing %d parity %d overflow %d\n\n",
                       port->ferr, port->perr, port->oflo);
    }
 
#ifdef DOS_STATS
  printf_filtered ("\nTotal interrupts: %d\n", intrcnt);
  for (i = 0; i < NCNT; i++)
    if (cnts[i])
      printf_filtered ("%s:\t%d\n", cntnames[i], cnts[i]);
#endif
}
 
 
void
_initialize_ser_dos (void)
{
  serial_add_interface (&dos_ops);
 
  /* Save original interrupt mask register. */
  icu_oldmask = inportb (ICU_MASK);
 
  /* Mark fixed motherboard irqs as inuse. */
  intrupts[0].inuse =            /* timer tick */
    intrupts[1].inuse =         /* keyboard */
    intrupts[2].inuse = 1;      /* slave icu */
 
  add_setshow_zinteger_cmd ("com1base", class_obscure, &ports[0].base, _("\
Set COM1 base i/o port address."), _("\
Show COM1 base i/o port address."), NULL,
                            NULL,
                            NULL, /* FIXME: i18n: */
                            &setlist, &showlist);
 
  add_setshow_zinteger_cmd ("com1irq", class_obscure, &ports[0].irq, _("\
Set COM1 interrupt request."), _("\
Show COM1 interrupt request."), NULL,
                            NULL,
                            NULL, /* FIXME: i18n: */
                            &setlist, &showlist);
 
  add_setshow_zinteger_cmd ("com2base", class_obscure, &ports[1].base, _("\
Set COM2 base i/o port address."), _("\
Show COM2 base i/o port address."), NULL,
                            NULL,
                            NULL, /* FIXME: i18n: */
                            &setlist, &showlist);
 
  add_setshow_zinteger_cmd ("com2irq", class_obscure, &ports[1].irq, _("\
Set COM2 interrupt request."), _("\
Show COM2 interrupt request."), NULL,
                            NULL,
                            NULL, /* FIXME: i18n: */
                            &setlist, &showlist);
 
  add_setshow_zinteger_cmd ("com3base", class_obscure, &ports[2].base, _("\
Set COM3 base i/o port address."), _("\
Show COM3 base i/o port address."), NULL,
                            NULL,
                            NULL, /* FIXME: i18n: */
                            &setlist, &showlist);
 
  add_setshow_zinteger_cmd ("com3irq", class_obscure, &ports[2].irq, _("\
Set COM3 interrupt request."), _("\
Show COM3 interrupt request."), NULL,
                            NULL,
                            NULL, /* FIXME: i18n: */
                            &setlist, &showlist);
 
  add_setshow_zinteger_cmd ("com4base", class_obscure, &ports[3].base, _("\
Set COM4 base i/o port address."), _("\
Show COM4 base i/o port address."), NULL,
                            NULL,
                            NULL, /* FIXME: i18n: */
                            &setlist, &showlist);
 
  add_setshow_zinteger_cmd ("com4irq", class_obscure, &ports[3].irq, _("\
Set COM4 interrupt request."), _("\
Show COM4 interrupt request."), NULL,
                            NULL,
                            NULL, /* FIXME: i18n: */
                            &setlist, &showlist);
 
  add_info ("serial", dos_info,
            _("Print DOS serial port status."));
}
Browse

Tools

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [gnu-src/] [gdb-6.8/] [gdb/] [ser-go32.c] - Blame information for rev 205

Line No.	Rev	Author	Line
1	24	jeremybenn	`/* Remote serial interface for local (hardwired) serial ports for GO32.`
2			`Copyright (C) 1992, 1993, 2000, 2001, 2007, 2008`
3			`Free Software Foundation, Inc.`
4
5			`Contributed by Nigel Stephens, Algorithmics Ltd. (nigel@algor.co.uk).`
6
7			`This version uses DPMI interrupts to handle buffered i/o`
8			`without the separate "asynctsr" program.`
9
10			`This file is part of GDB.`
11
12			`This program is free software; you can redistribute it and/or modify`
13			`it under the terms of the GNU General Public License as published by`
14			`the Free Software Foundation; either version 3 of the License, or`
15			`(at your option) any later version.`
16
17			`This program is distributed in the hope that it will be useful,`
18			`but WITHOUT ANY WARRANTY; without even the implied warranty of`
19			`MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
20			`GNU General Public License for more details.`
21
22			`You should have received a copy of the GNU General Public License`
23			`along with this program. If not, see <http://www.gnu.org/licenses/>. */`
24
25			`#include "defs.h"`
26			`#include "gdbcmd.h"`
27			`#include "serial.h"`
28			`#include "gdb_string.h"`
29
30
31			`/*`
32			`* NS16550 UART registers`
33			`*/`
34
35			`#define COM1ADDR 0x3f8`
36			`#define COM2ADDR 0x2f8`
37			`#define COM3ADDR 0x3e8`
38			`#define COM4ADDR 0x3e0`
39
40			`#define com_data 0 /* data register (R/W) */`