OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [gdb-6.8/] [gdb/] [testsuite/] [gdb.base/] [setshow.exp] - Blame information for rev 157

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 24 jeremybenn
# Copyright 1992, 1994, 1996, 1997, 1998, 2001, 2003, 2007, 2008
2
# Free Software Foundation, Inc.
3
 
4
# This program is free software; you can redistribute it and/or modify
5
# it under the terms of the GNU General Public License as published by
6
# the Free Software Foundation; either version 3 of the License, or
7
# (at your option) any later version.
8
#
9
# This program is distributed in the hope that it will be useful,
10
# but WITHOUT ANY WARRANTY; without even the implied warranty of
11
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12
# GNU General Public License for more details.
13
#
14
# You should have received a copy of the GNU General Public License
15
# along with this program.  If not, see .
16
 
17
# Please email any bugs, comments, and/or additions to this file to:
18
# bug-gdb@prep.ai.mit.edu
19
 
20
# This file was written by Michael Snyder (msnyder@cygnus.com)
21
 
22
if $tracelevel then {
23
        strace $tracelevel
24
}
25
 
26
set prms_id 0
27
set bug_id 0
28
 
29
set testfile "setshow"
30
set srcfile ${testfile}.c
31
set binfile ${objdir}/${subdir}/${testfile}
32
if { [gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile} executable {debug}] != "" } {
33
     untested setshow.exp
34
     return -1
35
}
36
 
37
# Start with a fresh gdb
38
 
39
gdb_exit
40
gdb_start
41
gdb_reinitialize_dir $srcdir/$subdir
42
gdb_load ${binfile}
43
 
44
# make sure $pc is sane, in case we're talking to a board.
45
if { ![runto_main] } {
46
    gdb_suppress_tests;
47
}
48
 
49
#
50
# Test gdb set and show commands.
51
# Add tests here for show and set that don't fit neatly elsewhere.
52
# FIXME: many rudimentary tests for set and show commands have been
53
#        added below, but most do nothing more than check that a
54
#        variable has been set successfully, ie. they do not test
55
#        whether setting the variable has had the desired effect.
56
#
57
 
58
#test default annotation_level is 0
59
gdb_test "show annotate" "Annotation_level is 0..*"  "default annotation_level is zero"
60
 
61
#test set annotate 2
62
send_gdb "set annotate 2\n"
63
gdb_expect {
64
        -re ".*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \
65
                                { pass "set annotate 2" }
66
        -re ".*$gdb_prompt $"   { fail "set annotate 2" }
67
        timeout                 { fail "(timeout) set annotate 2" }
68
    }
69
 
70
send_gdb "show annotate\n"
71
gdb_expect {
72
        -re ".*\032\032post-prompt.*Annotation_level is 2..*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \
73
                                { pass "show annotate (2)" }
74
        -re ".*$gdb_prompt $"   { fail "show annotate (2)" }
75
        timeout                 { fail "(timeout) show annotate (2)" }
76
    }
77
 
78
#test annotation_level 2
79
send_gdb "info line 1\n"
80
gdb_expect {
81
        -re ".*\032\032post-prompt.*Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \
82
                                { pass "annotation_level 2" }
83
        -re ".*$gdb_prompt $"   { fail "annotation_level 2" }
84
        timeout                 { fail "(timeout) annotation_level 2" }
85
    }
86
 
87
#test set annotate 1
88
gdb_test "set annotate 1" ".*post-prompt.*"  "set annotate 1"
89
gdb_test "show annotate" "Annotation_level is 1..*"  "show annotate (1)"
90
#test annotation_level 1
91
gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*"  "annotation_level 1"
92
#test set annotate 0
93
gdb_test "set annotate 0" "" "set annotate 0"
94
gdb_test "show annotate" "Annotation_level is 0..*"  "show annotate (0)"
95
#test annotation_level 0
96
gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*"  "annotation_level 0"
97
#test set args
98
gdb_test "set args foo bar blup baz bubble" "" "set args"
99
#test show args
100
gdb_test "show args" "Argument list to give program being debugged when it is started is \"foo bar blup baz bubble\"..*" "show args"
101
 
102
# Don't test if we can't pass args or if we're using a stub.
103
if { ![target_info exists use_gdb_stub] && ![target_info exists noargs] } {
104
    #test passing args
105
    gdb_test "cont" "Continuing.*" "continuing"
106
    delete_breakpoints
107
    gdb_test "run" "Starting program:.*foo bar blup baz bubble.*" "passing args"
108
}
109
#test set check range on
110
gdb_test "set check range on" "" "set check range on"
111
#test show check range on
112
gdb_test "show check range" "Range checking is \"on\"\..*" "show check range (on)"
113
#test set check range auto
114
gdb_test "set check range auto" "" "set check range auto"
115
#test show check range auto
116
gdb_test "show check range" "Range checking is \"auto; currently .*" "show check range (auto)"
117
#test set check type on
118
gdb_test "set check type on" "" "set check type on"
119
#test show check type on
120
gdb_test "show check type" "Type checking is \"on\"..*" "show check type (on)"
121
#test set check type auto
122
gdb_test "set check type auto" "" "set check type auto"
123
#test show check type
124
gdb_test "show check type" "Type checking is \"auto; currently .*" "show check type (auto)"
125
#test set complaints 100
126
gdb_test "set complaints 100" "" "set complaints 100"
127
#test show complaints 100
128
gdb_test "show complaints" "Max number of complaints about incorrect symbols is 100..*" "show complaints (100)"
129
#test set complaints 0
130
gdb_test "set complaints 0" "" "set complaints 0"
131
#test show complaints 0
132
gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0..*" "show complaints (0)"
133
#test set confirm off
134
gdb_test "set confirm off" "" "set confirm off"
135
#test show confirm off
136
gdb_test "show confirm" "Whether to confirm potentially dangerous operations is off..*" "show confirm (off)"
137
#test set confirm on
138
gdb_test "set confirm on" "" "set confirm on"
139
#test show confirm on
140
gdb_test "show confirm" "Whether to confirm potentially dangerous operations is on..*" "show confirm (on)"
141
#test set editing off
142
gdb_test "set editing off" "" "set editing off"
143
#test show editing off
144
gdb_test "show editing" "Editing of command lines as they are typed is off..*" "show editing (off)"
145
#test set editing on
146
#gdb_test "set editing on" "" "set editing on"
147
#test show editing on
148
#gdb_test "show editing" "Editing of command lines as they are typed is on..*" "show editing (on)"
149
#test set environment FOOBARBAZ
150
gdb_test "set environment FOOBARBAZ = grbxgrbxgrbx" ""    "set environment FOOBARBAZ"
151
#test show environment FOOBARBAZ
152
gdb_test "show environment FOOBARBAZ" "FOOBARBAZ = grbxgrbxgrbx.*"  "show environment FOOBARBAZ"
153
#test set height 100
154
gdb_test "set height 100" "" "set height 100"
155
#test show height 100
156
gdb_test "show height" "Number of lines gdb thinks are in a page is 100..*" "show height"
157
# back to infinite height to avoid pagers
158
gdb_test "set height 0" "" ""
159
#test set history expansion on
160
gdb_test "set history expansion on" "" "set history expansion on"
161
#test show history expansion on
162
gdb_test "show history expansion on" "History expansion on command input is on.*" "show history expansion"
163
#test set history filename foobar.baz
164
gdb_test "set history filename foobar.baz" ""    "set history filename foobar.baz"
165
#test show history filename foobar.baz
166
gdb_test "show history filename" "The filename in which to record the command history is \"foobar.baz\"..*"  "show history filename (foobar.baz)"
167
#test set history save on
168
gdb_test "set history save on" "" "set history save on"
169
#test show history save on
170
gdb_test "show history save" "Saving of the history record on exit is on..*"  "show history save (on)"
171
#test set history size 100
172
gdb_test "set history size 100" "" "set history size 100"
173
#test show history size 100
174
gdb_test "show history size" "The size of the command history is 100..*" "show history size (100)"
175
#test set language asm
176
gdb_test "set language asm" "" "set language asm"
177
#test show language asm
178
gdb_test "show language" "The current source language is \"asm\"..*" "show language (asm)"
179
#test set language auto
180
gdb_test "set language auto" "" "set language auto"
181
#test show language
182
gdb_test "show language" "The current source language is \"auto.*\"..*" "show language (auto)"
183
#test set listsize 100
184
gdb_test "set listsize 100" "" "set listsize 100"
185
#test show listsize 100
186
gdb_test "show listsize" "Number of source lines gdb will list by default is 100..*" "show listsize (100)"
187
 
188
if ![board_info target exists gdb_prompt] {
189
    #test set prompt (FooBarBaz)
190
    set newprompt "\\(FooBarBaz\\)"
191
    send_gdb "set prompt (FooBarBaz) \n"
192
    gdb_expect {
193
        -re "$newprompt $"      { pass "set prompt (FooBarBaz) " }
194
        timeout                 { fail "(timeout) set prompt (FooBarBaz) " }
195
    }
196
 
197
    #test show prompt (FooBarBaz)
198
    send_gdb "show prompt\n"
199
    gdb_expect {
200
        -re "Gdb's prompt is \"$newprompt \"..* $" \
201
                { pass "show prompt (FooBarBaz) " }
202
        timeout                 { fail "(timeout) show prompt (FooBarBaz) " }
203
    }
204
 
205
    #test set prompt (gdb)
206
    send_gdb "set prompt (gdb) \n"
207
    gdb_expect {
208
        -re "$gdb_prompt $"             { pass "set prompt (gdb) " }
209
        timeout                 { fail "(timeout) set prompt (gdb) " }
210
    }
211
}
212
 
213
#test set radix 11
214
gdb_test "set radix 11" "Unsupported output radix ``decimal 11''; output radix unchanged..*"  "set radix 11"
215
#test set radix 16
216
gdb_test "set radix 16" "Input and output radices now set to decimal 16, hex 10, octal 20..*"  "set radix 16"
217
#test show radix 16
218
gdb_test "show radix" "Input and output radices set to decimal 16, hex 10, octal 20..*"  "show radix (16)"
219
#test set radix 10
220
gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12..*"  "set radix 10"
221
#test show radix 10
222
gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12..*" "show radix (10)"
223
#test set width 90
224
gdb_test "set width 90" "" "set width 90"
225
#test show width 90
226
gdb_test "show width" "Number of characters gdb thinks are in a line is 90..*" "show width (90)"
227
#test set write on
228
# This is only supported on targets which use exec.o.
229
gdb_test "set write on" ""  "set write on"
230
#test show write on
231
# This is only supported on targets which use exec.o.
232
gdb_test "show write" "Writing into executable and core files is on..*" "show write (on)"
233
#test set symbol-reloading on
234
gdb_test "set symbol-reloading on" "" "set symbol-reloading on"
235
#test show symbol-reloading on
236
gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on..*" "show symbol-reloading (on)"
237
#test show user
238
gdb_test "show user" "" "show user"
239
#test set verbose on
240
gdb_test "set verbose on" "" "set verbose on"
241
#test show verbose on
242
gdb_test "show verbose" "Verbose printing of informational messages is on..*" "show verbose (on)"
243
#test set verbose off
244
gdb_test "set verbose off" "" "set verbose off"
245
#test show verbose off
246
gdb_test "show verbose" "Verbosity is off..*" "show verbose (off)"

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.