OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [gdb-6.8/] [gdb/] [testsuite/] [gdb.base/] [sigbpt.exp] - Blame information for rev 157

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 24 jeremybenn
# This testcase is part of GDB, the GNU debugger.
2
 
3
# Copyright 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
4
 
5
# This program is free software; you can redistribute it and/or modify
6
# it under the terms of the GNU General Public License as published by
7
# the Free Software Foundation; either version 3 of the License, or
8
# (at your option) any later version.
9
#
10
# This program is distributed in the hope that it will be useful,
11
# but WITHOUT ANY WARRANTY; without even the implied warranty of
12
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13
# GNU General Public License for more details.
14
#
15
# You should have received a copy of the GNU General Public License
16
# along with this program.  If not, see .
17
 
18
# Check that GDB can and only executes single instructions when
19
# stepping through a sequence of breakpoints interleaved by a signal
20
# handler.
21
 
22
# This test is known to tickle the following problems: kernel letting
23
# the inferior execute both the system call, and the instruction
24
# following, when single-stepping a system call; kernel failing to
25
# propogate the single-step state when single-stepping the sigreturn
26
# system call, instead resuming the inferior at full speed; GDB
27
# doesn't know how to software single-step across a sigreturn
28
# instruction.  Since the kernel problems can be "fixed" using
29
# software single-step this is KFAILed rather than XFAILed.
30
 
31
if [target_info exists gdb,nosignals] {
32
    verbose "Skipping sigbpt.exp because of nosignals."
33
    continue
34
}
35
 
36
if $tracelevel {
37
    strace $tracelevel
38
}
39
 
40
set prms_id 0
41
set bug_id 0
42
 
43
set testfile "sigbpt"
44
set srcfile ${testfile}.c
45
set binfile ${objdir}/${subdir}/${testfile}
46
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
47
    untested sigbpt.exp
48
    return -1
49
}
50
 
51
gdb_exit
52
gdb_start
53
gdb_reinitialize_dir $srcdir/$subdir
54
gdb_load ${binfile}
55
 
56
#
57
# Run to `main' where we begin our tests.
58
#
59
 
60
if ![runto_main] then {
61
    gdb_suppress_tests
62
}
63
 
64
# If we can examine what's at memory address 0, it is possible that we
65
# could also execute it.  This could probably make us run away,
66
# executing random code, which could have all sorts of ill effects,
67
# especially on targets without an MMU.  Don't run the tests in that
68
# case.
69
 
70
send_gdb "x 0\n"
71
gdb_expect {
72
    -re "0x0:.*Cannot access memory at address 0x0.*$gdb_prompt $" { }
73
    -re "0x0:.*Error accessing memory address 0x0.*$gdb_prompt $" { }
74
    -re ".*$gdb_prompt $" {
75
        untested "Memory at address 0 is possibly executable"
76
        return
77
    }
78
}
79
 
80
gdb_test "break keeper"
81
 
82
# Run to bowler, and then single step until there's a SIGSEGV.  Record
83
# the address of each single-step instruction (up to and including the
84
# instruction that causes the SIGSEGV) in bowler_addrs, and the address
85
# of the actual SIGSEGV in segv_addr.
86
 
87
set bowler_addrs bowler
88
set segv_addr none
89
gdb_test {display/i $pc}
90
gdb_test "advance *bowler" "bowler.*" "advance to the bowler"
91
set test "stepping to SIGSEGV"
92
gdb_test_multiple "stepi" "$test" {
93
    -re "Program received signal SIGSEGV.*pc(\r\n| *) *(0x\[0-9a-f\]*).*$gdb_prompt $" {
94
        set segv_addr $expect_out(2,string)
95
        pass "$test"
96
    }
97
    -re " .*pc(\r\n| *)(0x\[0-9a-f\]*).*bowler.*$gdb_prompt $" {
98
        set bowler_addrs [concat $expect_out(2,string) $bowler_addrs]
99
        send_gdb "stepi\n"
100
        exp_continue
101
    }
102
}
103
 
104
# Now record the address of the instruction following the faulting
105
# instruction in bowler_addrs.
106
 
107
set test "get insn after fault"
108
gdb_test_multiple {x/2i $pc} "$test" {
109
    -re "(0x\[0-9a-f\]*).*bowler.*(0x\[0-9a-f\]*).*bowler.*$gdb_prompt $" {
110
        set bowler_addrs [concat $expect_out(2,string) $bowler_addrs]
111
        pass "$test"
112
    }
113
}
114
 
115
# Procedures for returning the address of the instruction before, at
116
# and after, the faulting instruction.
117
 
118
proc before_segv { } {
119
    global bowler_addrs
120
    return [lindex $bowler_addrs 2]
121
}
122
 
123
proc at_segv { } {
124
    global bowler_addrs
125
    return [lindex $bowler_addrs 1]
126
}
127
 
128
proc after_segv { } {
129
    global bowler_addrs
130
    return [lindex $bowler_addrs 0]
131
}
132
 
133
# Check that the address table and SIGSEGV correspond.
134
 
135
set test "Verify that SIGSEGV occurs at the last STEPI insn"
136
if {[string compare $segv_addr [at_segv]] == 0} {
137
    pass "$test"
138
} else {
139
    fail "$test ($segv_addr [at_segv])"
140
}
141
 
142
# Check that the inferior is correctly single stepped all the way back
143
# to a faulting instruction.
144
 
145
proc stepi_out { name args } {
146
    global gdb_prompt
147
 
148
    # Set SIGSEGV to pass+nostop and then run the inferior all the way
149
    # through to the signal handler.  With the handler is reached,
150
    # disable SIGSEGV, ensuring that further signals stop the
151
    # inferior.  Stops a SIGSEGV infinite loop when a broke system
152
    # keeps re-executing the faulting instruction.
153
    rerun_to_main
154
    gdb_test "handle SIGSEGV nostop print pass" "" "${name}; pass SIGSEGV"
155
    gdb_test "continue" "keeper.*" "${name}; continue to keeper"
156
    gdb_test "handle SIGSEGV stop print nopass" "" "${name}; nopass SIGSEGV"
157
 
158
    # Insert all the breakpoints.  To avoid the need to step over
159
    # these instructions, this is delayed until after the keeper has
160
    # been reached.
161
    for {set i 0} {$i < [llength $args]} {incr i} {
162
        gdb_test "break [lindex $args $i]" "Breakpoint.*" \
163
            "${name}; set breakpoint $i of [llength $args]"
164
    }
165
 
166
    # Single step our way out of the keeper, through the signal
167
    # trampoline, and back to the instruction that faulted.
168
    set test "${name}; stepi out of handler"
169
    gdb_test_multiple "stepi" "$test" {
170
        -re "Could not insert single-step breakpoint.*$gdb_prompt $" {
171
            setup_kfail "sparc*-*-openbsd*" gdb/1736
172
            fail "$test (could not insert single-step breakpoint)"
173
        }
174
        -re "keeper.*$gdb_prompt $" {
175
            send_gdb "stepi\n"
176
            exp_continue
177
        }
178
        -re "signal handler.*$gdb_prompt $" {
179
            send_gdb "stepi\n"
180
            exp_continue
181
        }
182
        -re "Program received signal SIGSEGV.*$gdb_prompt $" {
183
            kfail gdb/1702 "$test (executed fault insn)"
184
        }
185
        -re "Breakpoint.*pc(\r\n| *)[at_segv] .*bowler.*$gdb_prompt $" {
186
            pass "$test (at breakpoint)"
187
        }
188
        -re "Breakpoint.*pc(\r\n| *)[after_segv] .*bowler.*$gdb_prompt $" {
189
            kfail gdb/1702 "$test (executed breakpoint)"
190
        }
191
        -re "pc(\r\n| *)[at_segv] .*bowler.*$gdb_prompt $" {
192
            pass "$test"
193
        }
194
        -re "pc(\r\n| *)[after_segv] .*bowler.*$gdb_prompt $" {
195
            kfail gdb/1702 "$test (skipped fault insn)"
196
        }
197
        -re "pc(\r\n| *)0x\[a-z0-9\]* .*bowler.*$gdb_prompt $" {
198
            kfail gdb/1702 "$test (corrupt pc)"
199
        }
200
    }
201
 
202
    # Clear any breakpoints
203
    for {set i 0} {$i < [llength $args]} {incr i} {
204
        gdb_test "clear [lindex $args $i]" "Deleted .*" \
205
            "${name}; clear breakpoint $i of [llength $args]"
206
    }
207
}
208
 
209
# Let a signal handler exit, returning to a breakpoint instruction
210
# inserted at the original fault instruction.  Check that the
211
# breakpoint is hit, and that single stepping off that breakpoint
212
# executes the underlying fault instruction causing a SIGSEGV.
213
 
214
proc cont_out { name args } {
215
    global gdb_prompt
216
 
217
    # Set SIGSEGV to pass+nostop and then run the inferior all the way
218
    # through to the signal handler.  With the handler is reached,
219
    # disable SIGSEGV, ensuring that further signals stop the
220
    # inferior.  Stops a SIGSEGV infinite loop when a broke system
221
    # keeps re-executing the faulting instruction.
222
    rerun_to_main
223
    gdb_test "handle SIGSEGV nostop print pass" "" "${name}; pass SIGSEGV"
224
    gdb_test "continue" "keeper.*" "${name}; continue to keeper"
225
    gdb_test "handle SIGSEGV stop print nopass" "" "${name}; nopass SIGSEGV"
226
 
227
    # Insert all the breakpoints.  To avoid the need to step over
228
    # these instructions, this is delayed until after the keeper has
229
    # been reached.  Always set a breakpoint at the signal trampoline
230
    # instruction.
231
    set args [concat $args "*[at_segv]"]
232
    for {set i 0} {$i < [llength $args]} {incr i} {
233
        gdb_test "break [lindex $args $i]" "Breakpoint.*" \
234
            "${name}; set breakpoint $i  of [llength $args]"
235
    }
236
 
237
    # Let the handler return, it should "appear to hit" the breakpoint
238
    # inserted at the faulting instruction.  Note that the breakpoint
239
    # instruction wasn't executed, rather the inferior was SIGTRAPed
240
    # with the PC at the breakpoint.
241
    gdb_test "continue" "Breakpoint.*pc(\r\n| *)[at_segv] .*" \
242
        "${name}; continue to breakpoint at fault"
243
 
244
    # Now single step the faulted instrction at that breakpoint.
245
    gdb_test "stepi" \
246
        "Program received signal SIGSEGV.*pc(\r\n| *)[at_segv] .*" \
247
        "${name}; stepi fault"
248
 
249
    # Clear any breakpoints
250
    for {set i 0} {$i < [llength $args]} {incr i} {
251
        gdb_test "clear [lindex $args $i]" "Deleted .*" \
252
            "${name}; clear breakpoint $i of [llength $args]"
253
    }
254
 
255
}
256
 
257
 
258
 
259
# Try to confuse DECR_PC_AFTER_BREAK architectures by scattering
260
# breakpoints around the faulting address.  In all cases the inferior
261
# should single-step out of the signal trampoline halting (but not
262
# executing) the fault instruction.
263
 
264
stepi_out "stepi"
265
stepi_out "stepi bp before segv" "*[before_segv]"
266
stepi_out "stepi bp at segv" "*[at_segv]"
267
stepi_out "stepi bp before and at segv" "*[at_segv]" "*[before_segv]"
268
 
269
 
270
# Try to confuse DECR_PC_AFTER_BREAK architectures by scattering
271
# breakpoints around the faulting address.  In all cases the inferior
272
# should exit the signal trampoline halting at the breakpoint that
273
# replaced the fault instruction.
274
cont_out "cont"
275
cont_out "cont bp after segv" "*[before_segv]"
276
cont_out "cont bp before and after segv" "*[before_segv]" "*[after_segv]"

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.