Subversion Repositories openrisc_me

# Copyright 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 3 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program.  If not, see .

# The program sigstep.c creates a very simple backtrace containing one

# signal handler and signal trampoline.  A flag is set and then the

# handler returns.  This is repeated at infinitum.

# This test runs the program up to the signal handler, and then

# attempts to step/next out of the handler and back into main.

if [target_info exists gdb,nosignals] {

    verbose "Skipping sigstep.exp because of nosignals."

    continue

}

if $tracelevel then {

    strace $tracelevel

}

set prms_id 0

set bug_id 0

set testfile sigstep

set srcfile ${testfile}.c

set binfile ${objdir}/${subdir}/${testfile}

if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {

    untested "Couldn't compile ${srcfile}.c"

    return -1

}

# get things started

gdb_exit

gdb_start

gdb_reinitialize_dir $srcdir/$subdir

gdb_load ${binfile}

gdb_test "display/i \$pc"

# Advance to main

if { ![runto_main] } then {

    gdb_suppress_tests;

}

# Pass all the alarms straight through (but verbosely)

# gdb_test "handle SIGALRM print pass nostop"

# gdb_test "handle SIGVTALRM print pass nostop"

# gdb_test "handle SIGPROF print pass nostop"

# Run to the signal handler, validate the backtrace.

gdb_test "break handler"

gdb_test "continue" ".* handler .*" "continue to stepi handler"

send_gdb "bt\n"

gdb_expect_list "backtrace for nexti" ".*$gdb_prompt $" {

    "\[\r\n\]+.0 \[^\r\n\]* handler "

    "\[\r\n\]+.1  .signal handler called."

    "\[\r\n\]+.2 \[^\r\n\]* main .*"

}

proc advance { i } {

    global gdb_prompt

    set prefix "$i from handler"

    # Get us back into the handler

    gdb_test "continue" ".* handler .*" "$prefix; continue to handler"

    set test "$prefix; leave handler"

    gdb_test_multiple "$i" "${test}" {

        -re "Could not insert single-step breakpoint.*$gdb_prompt $" {

            setup_kfail "sparc*-*-openbsd*" gdb/1736

            fail "$test (could not insert single-step breakpoint)"

        }

        -re "done = 1;.*${gdb_prompt} $" {

            send_gdb "$i\n"

            exp_continue -continue_timer

        }

        -re "\} .. handler .*${gdb_prompt} $" {

            send_gdb "$i\n"

            exp_continue -continue_timer

        }

        -re "Program exited normally.*${gdb_prompt} $" {

            setup_kfail powerpc-*-*bsd* gdb/1639

            fail "$test (program exited)"

        }

        -re "(while ..done|done = 0).*${gdb_prompt} $" {

            # After stepping out of a function /r signal-handler, GDB will

            # advance the inferior until it is at the first instruction of

            # a code-line.  While typically things return to the middle of

            # the "while..." (and hence GDB advances the inferior to the

            # "return..." line) it is also possible for the return to land

            # on the first instruction of "while...".  Accept both cases.

            pass "$test"

        }

    }

}

proc advancei { i } {

    global gdb_prompt

    set prefix "$i from handleri"

    set program_exited 0

    # Get us back into the handler

    gdb_test "continue" ".* handler .*" "$prefix; continue to handler"

    set test "$prefix; leave handler"

    gdb_test_multiple "$i" "${test}" {

        -re "Cannot insert breakpoint 0.*${gdb_prompt} $" {

            # Some platforms use a special read-only page for signal

            # trampolines.  We can't set a breakpoint there, and we

            # don't gracefully fall back to single-stepping.

            setup_kfail "i?86-*-linux*" gdb/1736

            setup_kfail "*-*-openbsd*" gdb/1736

            fail "$test (could not set breakpoint)"

            return

        }

        -re "Could not insert single-step breakpoint.*$gdb_prompt $" {

            setup_kfail "sparc*-*-openbsd*" gdb/1736

            fail "$test (could not insert single-step breakpoint)"

        }

        -re "Breakpoint \[0-9\]*, handler .*${gdb_prompt} $" {

            fail "$test (hit breakpoint again)"

        }

        -re "done = 1;.*${gdb_prompt} $" {

            send_gdb "$i\n"

            exp_continue -continue_timer

        }

        -re "\} .. handler .*${gdb_prompt} $" {

            send_gdb "$i\n"

            exp_continue -continue_timer

        }

        -re "signal handler called.*${gdb_prompt} $" {

            pass "$test"

        }

        -re "main .*${gdb_prompt} $" {

            fail "$test (in main)"

        }

        -re "Program exited normally.*${gdb_prompt} $" {

            fail "$test (program exited)"

            set program_exited 1

        }

        -re "Make handler return now.*y or n. $" {

            send_gdb "y\n"

            exp_continue -continue_timer

        }

    }

    set test "$prefix; leave signal trampoline"

    gdb_test_multiple "$i" "${test}" {

        -re "while .*${gdb_prompt} $" {

            pass "$test (in main)"

        }

        -re "signal handler called.*${gdb_prompt} $" {

            send_gdb "$i\n"

            exp_continue -continue_timer

        }

        -re "return .*${gdb_prompt} $" {

            fail "$test (stepped)"

        }

        -re "Make .*frame return now.*y or n. $" {

            send_gdb "y\n"

            exp_continue -continue_timer

        }

        -re "Program exited normally.*${gdb_prompt} $" {

            kfail gdb/1639 "$test (program exited)"

            set program_exited 1

        }

        -re "The program is not being run.*${gdb_prompt} $" {

            if { $program_exited } {

                # Previously kfailed with an exit

                pass "$test (the program is not being run)"

            } else {

                fail "$test (the program is not being run)"

            }

        }

    }

}

# Check that we can step/next our way out of a signal handler.

advance step

advancei stepi

advance next

advancei nexti

advancei finish

advancei return

gdb_test "set done = 1" "" "Set done as return will have skipped it"

# Check that we can step/next our way into / over a signal handler.

# There are at least the following cases: breakpoint @pc VS breakpoint

# in handler VS step / next / continue.

# Use the real-time itimer, as otherwize the process never gets enough

# time to expire the timer.

delete_breakpoints

set infinite_loop [gdb_get_line_number {while (!done)}]

gdb_test "set itimer = itimer_real"

gdb_test "break [gdb_get_line_number {done = 0}]"

# Try stepping when there's a signal pending, and a breakpoint at the

# handler.  Should step into the signal handler.

proc skip_to_handler { i } {

    global gdb_prompt

    global infinite_loop

    set prefix "$i to handler"

    # Run around to the done

    # You can add more patterns to this if you need them.

    set test "$prefix; resync"

    gdb_test_multiple "continue" "$test" {

        -re "done = 0.*$gdb_prompt " {

            pass "$test"

        }

    }

    # Advance to the infinite loop

    gdb_test "advance $infinite_loop" "" "$prefix; advance to infinite loop"

    # Make the signal pending

    sleep 1

    # Insert / remove the handler breakpoint.

    gdb_test "break handler" "" "$prefix; break handler"

    gdb_test "$i" " handler .*" "$prefix; performing $i"

    gdb_test "clear handler" "" "$prefix; clear handler"

}

skip_to_handler step

skip_to_handler next

skip_to_handler continue

# Try stepping when there's a signal pending, and a breakpoint at the

# handler's entry-point.  Should step into the signal handler stopping

# at the entry-point.

# Some systems (e.x., GNU/Linux as of 2004-08-30), when delivering a

# signal, resume the process at the first instruction of the signal

# handler and not the first instruction of the signal trampoline.  The

# stack is constructed such that the signal handler still appears to

# have been called by the trampoline code.  This test checks that it

# is possible to stop the inferior, even at that first instruction.

proc skip_to_handler_entry { i } {

    global gdb_prompt

    global infinite_loop

    set prefix "$i to handler entry"

    # Run around to the done

    # You can add more patterns to this if you need them.

    set test "$prefix; resync"

    gdb_test_multiple "continue" "$test" {

        -re "done = 0.*$gdb_prompt " {

            pass "$test"

        }

    }

    # Advance to the infinite loop

    gdb_test "advance $infinite_loop" "" "$prefix; advance to infinite loop"

    # Make the signal pending

    sleep 1

    # Insert / remove the handler breakpoint.

    gdb_test "break *handler" "" "$prefix; break handler"

    gdb_test "$i" " handler .*" "$prefix; performing $i"

    gdb_test "clear *handler" "" "$prefix; clear handler"

}

skip_to_handler_entry step

skip_to_handler_entry next

skip_to_handler_entry continue

# Try stepping when there's a signal pending but no breakpoints.

# Should skip the handler advancing to the next line.

proc skip_over_handler { i } {

    global gdb_prompt

    global infinite_loop

    set prefix "$i over handler"

    # Run around to the done

    # You can add more patterns to this if you need them.

    set test "$prefix; resync"

    gdb_test_multiple "continue" "$test" {

        -re "done = 0.*$gdb_prompt " {

            pass "$test"

        }

    }

    # Advance to the infinite loop

    gdb_test "advance $infinite_loop" "" "$prefix; advance to infinite loop"

    # Make the signal pending

    sleep 1

    gdb_test "$i" "done = 0.*" "$prefix; performing $i"

}

skip_over_handler step

skip_over_handler next

skip_over_handler continue

# Try stepping when there's a signal pending, a pre-existing

# breakpoint at the current instruction, and a breakpoint in the

# handler.  Should advance to the signal handler.

proc breakpoint_to_handler { i } {

    global gdb_prompt

    global infinite_loop

    set prefix "$i on breakpoint, to handler"

    # Run around to the done

    # You can add more patterns to this if you need them.

    set test "$prefix; resync"

    gdb_test_multiple "continue" "$test" {

        -re "done = 0.*$gdb_prompt " {

            pass "$test"

        }

    }

    gdb_test "break $infinite_loop" "" "$prefix; break infinite loop"

    gdb_test "break handler" "" "$prefix; break handler"

    # Continue to the infinite loop

    gdb_test "continue" "while ..done.*" "$prefix; continue to infinite loop"

    # Make the signal pending

    sleep 1

    setup_kfail "i*86-*-*" gdb/1738

    gdb_test "$i" " handler .*" "$prefix; performing $i"

    gdb_test "clear $infinite_loop" "" "$prefix; clear infinite loop"

    gdb_test "clear handler" "" "$prefix; clear handler"

}

breakpoint_to_handler step

breakpoint_to_handler next

breakpoint_to_handler continue

# Try stepping when there's a signal pending, and a breakpoint at the

# handler's entry instruction and a breakpoint at the current

# instruction.  Should step into the signal handler and breakpoint at

# that entry instruction.

# Some systems (e.x., GNU/Linux as of 2004-08-30), when delivering a

# signal, resume the process at the first instruction of the signal

# handler and not the first instruction of the signal trampoline.  The

# stack is constructed such that the signal handler still appears to

# have been called by the trampoline code.  This test checks that it

# is possible to stop the inferior, even at that first instruction.

proc breakpoint_to_handler_entry { i } {

    global gdb_prompt

    global infinite_loop

    set prefix "$i on breakpoint, to handler entry"

    # Run around to the done

    # You can add more patterns to this if you need them.

    set test "$prefix; resync"

    gdb_test_multiple "continue" "$test" {

        -re "done = 0.*$gdb_prompt " {

            pass "$test"

        }

    }

    gdb_test "break $infinite_loop" "" "$prefix; break infinite loop"

    gdb_test "break *handler" "" "$prefix; break handler"

    # Continue to the infinite loop

    gdb_test "continue" "while ..done.*" "$prefix; continue to infinite loop"

    # Make the signal pending

    sleep 1

    setup_kfail "i*86-*-*" gdb/1738

    gdb_test "$i" " handler .*" "$prefix; performing $i"

    gdb_test "clear $infinite_loop" "" "$prefix; clear infinite loop"

    gdb_test "clear *handler" "" "$prefix; clear handler"

}

breakpoint_to_handler_entry step

breakpoint_to_handler_entry next

breakpoint_to_handler_entry continue

# Try stepping when there's a signal pending, and a pre-existing

# breakpoint at the current instruction, and no breakpoint in the

# handler.  Should advance to the next line.

proc breakpoint_over_handler { i } {

    global gdb_prompt

    global infinite_loop

    set prefix "$i on breakpoint, skip handler"

    # Run around to the done

    # You can add more patterns to this if you need them.

    set test "$prefix; resync"

    gdb_test_multiple "continue" "$test" {

        -re "done = 0.*$gdb_prompt " {

            pass "$test"

        }

    }

    gdb_test "break $infinite_loop" "" "$prefix; break infinite loop"

    # Continue to the infinite loop

    gdb_test "continue" "while ..done.*" "$prefix; continue to infinite loop"

    # Make the signal pending

    sleep 1

    gdb_test "$i" "done = 0.*" "$prefix; performing $i"

    gdb_test "clear $infinite_loop" "" "$prefix; clear infinite loop"

}

breakpoint_over_handler step

breakpoint_over_handler next

breakpoint_over_handler continue