Subversion Repositories openrisc_me

/* GNU/Linux on ARM target support.

   Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,

   2009, 2010 Free Software Foundation, Inc.

   This file is part of GDB.

   This program is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 3 of the License, or

   (at your option) any later version.

   This program is distributed in the hope that it will be useful,

   but WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License

   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */

#include "defs.h"

#include "target.h"

#include "value.h"

#include "gdbtypes.h"

#include "floatformat.h"

#include "gdbcore.h"

#include "frame.h"

#include "regcache.h"

#include "doublest.h"

#include "solib-svr4.h"

#include "osabi.h"

#include "regset.h"

#include "trad-frame.h"

#include "tramp-frame.h"

#include "breakpoint.h"

#include "arm-tdep.h"

#include "arm-linux-tdep.h"

#include "linux-tdep.h"

#include "glibc-tdep.h"

#include "arch-utils.h"

#include "inferior.h"

#include "gdbthread.h"

#include "symfile.h"

#include "gdb_string.h"

extern int arm_apcs_32;

/* Under ARM GNU/Linux the traditional way of performing a breakpoint

   is to execute a particular software interrupt, rather than use a

   particular undefined instruction to provoke a trap.  Upon exection

   of the software interrupt the kernel stops the inferior with a

   SIGTRAP, and wakes the debugger.  */

static const char arm_linux_arm_le_breakpoint[] = { 0x01, 0x00, 0x9f, 0xef };

static const char arm_linux_arm_be_breakpoint[] = { 0xef, 0x9f, 0x00, 0x01 };

/* However, the EABI syscall interface (new in Nov. 2005) does not look at

   the operand of the swi if old-ABI compatibility is disabled.  Therefore,

   use an undefined instruction instead.  This is supported as of kernel

   version 2.5.70 (May 2003), so should be a safe assumption for EABI

   binaries.  */

static const char eabi_linux_arm_le_breakpoint[] = { 0xf0, 0x01, 0xf0, 0xe7 };

static const char eabi_linux_arm_be_breakpoint[] = { 0xe7, 0xf0, 0x01, 0xf0 };

/* All the kernels which support Thumb support using a specific undefined

   instruction for the Thumb breakpoint.  */

static const char arm_linux_thumb_be_breakpoint[] = {0xde, 0x01};

static const char arm_linux_thumb_le_breakpoint[] = {0x01, 0xde};

/* Because the 16-bit Thumb breakpoint is affected by Thumb-2 IT blocks,

   we must use a length-appropriate breakpoint for 32-bit Thumb

   instructions.  See also thumb_get_next_pc.  */

static const char arm_linux_thumb2_be_breakpoint[] = { 0xf7, 0xf0, 0xa0, 0x00 };

static const char arm_linux_thumb2_le_breakpoint[] = { 0xf0, 0xf7, 0x00, 0xa0 };

/* Description of the longjmp buffer.  */

#define ARM_LINUX_JB_ELEMENT_SIZE       INT_REGISTER_SIZE

#define ARM_LINUX_JB_PC                 21

/*

   Dynamic Linking on ARM GNU/Linux

   --------------------------------

   Note: PLT = procedure linkage table

   GOT = global offset table

   As much as possible, ELF dynamic linking defers the resolution of

   jump/call addresses until the last minute. The technique used is

   inspired by the i386 ELF design, and is based on the following

   constraints.

   1) The calling technique should not force a change in the assembly

   code produced for apps; it MAY cause changes in the way assembly

   code is produced for position independent code (i.e. shared

   libraries).

   2) The technique must be such that all executable areas must not be

   modified; and any modified areas must not be executed.

   To do this, there are three steps involved in a typical jump:

   1) in the code

   2) through the PLT

   3) using a pointer from the GOT

   When the executable or library is first loaded, each GOT entry is

   initialized to point to the code which implements dynamic name

   resolution and code finding.  This is normally a function in the

   program interpreter (on ARM GNU/Linux this is usually

   ld-linux.so.2, but it does not have to be).  On the first

   invocation, the function is located and the GOT entry is replaced

   with the real function address.  Subsequent calls go through steps

   1, 2 and 3 and end up calling the real code.

   1) In the code:

   b    function_call

   bl   function_call

   This is typical ARM code using the 26 bit relative branch or branch

   and link instructions.  The target of the instruction

   (function_call is usually the address of the function to be called.

   In position independent code, the target of the instruction is

   actually an entry in the PLT when calling functions in a shared

   library.  Note that this call is identical to a normal function

   call, only the target differs.

   2) In the PLT:

   The PLT is a synthetic area, created by the linker. It exists in

   both executables and libraries. It is an array of stubs, one per

   imported function call. It looks like this:

   PLT[0]:

   str     lr, [sp, #-4]!       @push the return address (lr)

   ldr     lr, [pc, #16]   @load from 6 words ahead

   add     lr, pc, lr      @form an address for GOT[0]

   ldr     pc, [lr, #8]!   @jump to the contents of that addr

   The return address (lr) is pushed on the stack and used for

   calculations.  The load on the second line loads the lr with

   &GOT[3] - . - 20.  The addition on the third leaves:

   lr = (&GOT[3] - . - 20) + (. + 8)

   lr = (&GOT[3] - 12)

   lr = &GOT[0]

   On the fourth line, the pc and lr are both updated, so that:

   pc = GOT[2]

   lr = &GOT[0] + 8

   = &GOT[2]

   NOTE: PLT[0] borrows an offset .word from PLT[1]. This is a little

   "tight", but allows us to keep all the PLT entries the same size.

   PLT[n+1]:

   ldr     ip, [pc, #4]    @load offset from gotoff

   add     ip, pc, ip      @add the offset to the pc

   ldr     pc, [ip]        @jump to that address

   gotoff: .word   GOT[n+3] - .

   The load on the first line, gets an offset from the fourth word of

   the PLT entry.  The add on the second line makes ip = &GOT[n+3],

   which contains either a pointer to PLT[0] (the fixup trampoline) or

   a pointer to the actual code.

   3) In the GOT:

   The GOT contains helper pointers for both code (PLT) fixups and

   data fixups.  The first 3 entries of the GOT are special. The next

   M entries (where M is the number of entries in the PLT) belong to

   the PLT fixups. The next D (all remaining) entries belong to

   various data fixups. The actual size of the GOT is 3 + M + D.

   The GOT is also a synthetic area, created by the linker. It exists

   in both executables and libraries.  When the GOT is first

   initialized , all the GOT entries relating to PLT fixups are

   pointing to code back at PLT[0].

   The special entries in the GOT are:

   GOT[0] = linked list pointer used by the dynamic loader

   GOT[1] = pointer to the reloc table for this module

   GOT[2] = pointer to the fixup/resolver code

   The first invocation of function call comes through and uses the

   fixup/resolver code.  On the entry to the fixup/resolver code:

   ip = &GOT[n+3]

   lr = &GOT[2]

   stack[0] = return address (lr) of the function call

   [r0, r1, r2, r3] are still the arguments to the function call

   This is enough information for the fixup/resolver code to work

   with.  Before the fixup/resolver code returns, it actually calls

   the requested function and repairs &GOT[n+3].  */

/* The constants below were determined by examining the following files

   in the linux kernel sources:

      arch/arm/kernel/signal.c

          - see SWI_SYS_SIGRETURN and SWI_SYS_RT_SIGRETURN

      include/asm-arm/unistd.h

          - see __NR_sigreturn, __NR_rt_sigreturn, and __NR_SYSCALL_BASE */

#define ARM_LINUX_SIGRETURN_INSTR       0xef900077

#define ARM_LINUX_RT_SIGRETURN_INSTR    0xef9000ad

/* For ARM EABI, the syscall number is not in the SWI instruction

   (instead it is loaded into r7).  We recognize the pattern that

   glibc uses...  alternatively, we could arrange to do this by

   function name, but they are not always exported.  */

#define ARM_SET_R7_SIGRETURN            0xe3a07077

#define ARM_SET_R7_RT_SIGRETURN         0xe3a070ad

#define ARM_EABI_SYSCALL                0xef000000

/* OABI syscall restart trampoline, used for EABI executables too

   whenever OABI support has been enabled in the kernel.  */

#define ARM_OABI_SYSCALL_RESTART_SYSCALL 0xef900000

#define ARM_LDR_PC_SP_12                0xe49df00c

static void

arm_linux_sigtramp_cache (struct frame_info *this_frame,

                          struct trad_frame_cache *this_cache,

                          CORE_ADDR func, int regs_offset)

{

  CORE_ADDR sp = get_frame_register_unsigned (this_frame, ARM_SP_REGNUM);

  CORE_ADDR base = sp + regs_offset;

  int i;

  for (i = 0; i < 16; i++)

    trad_frame_set_reg_addr (this_cache, i, base + i * 4);

  trad_frame_set_reg_addr (this_cache, ARM_PS_REGNUM, base + 16 * 4);

  /* The VFP or iWMMXt registers may be saved on the stack, but there's

     no reliable way to restore them (yet).  */

  /* Save a frame ID.  */

  trad_frame_set_id (this_cache, frame_id_build (sp, func));

}

/* There are a couple of different possible stack layouts that

   we need to support.

   Before version 2.6.18, the kernel used completely independent

   layouts for non-RT and RT signals.  For non-RT signals the stack

   began directly with a struct sigcontext.  For RT signals the stack

   began with two redundant pointers (to the siginfo and ucontext),

   and then the siginfo and ucontext.

   As of version 2.6.18, the non-RT signal frame layout starts with

   a ucontext and the RT signal frame starts with a siginfo and then

   a ucontext.  Also, the ucontext now has a designated save area

   for coprocessor registers.

   For RT signals, it's easy to tell the difference: we look for

   pinfo, the pointer to the siginfo.  If it has the expected

   value, we have an old layout.  If it doesn't, we have the new

   layout.

   For non-RT signals, it's a bit harder.  We need something in one

   layout or the other with a recognizable offset and value.  We can't

   use the return trampoline, because ARM usually uses SA_RESTORER,

   in which case the stack return trampoline is not filled in.

   We can't use the saved stack pointer, because sigaltstack might

   be in use.  So for now we guess the new layout...  */

/* There are three words (trap_no, error_code, oldmask) in

   struct sigcontext before r0.  */

#define ARM_SIGCONTEXT_R0 0xc

/* There are five words (uc_flags, uc_link, and three for uc_stack)

   in the ucontext_t before the sigcontext.  */

#define ARM_UCONTEXT_SIGCONTEXT 0x14

/* There are three elements in an rt_sigframe before the ucontext:

   pinfo, puc, and info.  The first two are pointers and the third

   is a struct siginfo, with size 128 bytes.  We could follow puc

   to the ucontext, but it's simpler to skip the whole thing.  */

#define ARM_OLD_RT_SIGFRAME_SIGINFO 0x8

#define ARM_OLD_RT_SIGFRAME_UCONTEXT 0x88

#define ARM_NEW_RT_SIGFRAME_UCONTEXT 0x80

#define ARM_NEW_SIGFRAME_MAGIC 0x5ac3c35a

static void

arm_linux_sigreturn_init (const struct tramp_frame *self,

                          struct frame_info *this_frame,

                          struct trad_frame_cache *this_cache,

                          CORE_ADDR func)

{

  struct gdbarch *gdbarch = get_frame_arch (this_frame);

  enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);

  CORE_ADDR sp = get_frame_register_unsigned (this_frame, ARM_SP_REGNUM);

  ULONGEST uc_flags = read_memory_unsigned_integer (sp, 4, byte_order);

  if (uc_flags == ARM_NEW_SIGFRAME_MAGIC)

    arm_linux_sigtramp_cache (this_frame, this_cache, func,

                              ARM_UCONTEXT_SIGCONTEXT

                              + ARM_SIGCONTEXT_R0);

  else

    arm_linux_sigtramp_cache (this_frame, this_cache, func,

                              ARM_SIGCONTEXT_R0);

}

static void

arm_linux_rt_sigreturn_init (const struct tramp_frame *self,

                          struct frame_info *this_frame,

                          struct trad_frame_cache *this_cache,

                          CORE_ADDR func)

{

  struct gdbarch *gdbarch = get_frame_arch (this_frame);

  enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);

  CORE_ADDR sp = get_frame_register_unsigned (this_frame, ARM_SP_REGNUM);

  ULONGEST pinfo = read_memory_unsigned_integer (sp, 4, byte_order);

  if (pinfo == sp + ARM_OLD_RT_SIGFRAME_SIGINFO)

    arm_linux_sigtramp_cache (this_frame, this_cache, func,

                              ARM_OLD_RT_SIGFRAME_UCONTEXT

                              + ARM_UCONTEXT_SIGCONTEXT

                              + ARM_SIGCONTEXT_R0);

  else

    arm_linux_sigtramp_cache (this_frame, this_cache, func,

                              ARM_NEW_RT_SIGFRAME_UCONTEXT

                              + ARM_UCONTEXT_SIGCONTEXT

                              + ARM_SIGCONTEXT_R0);

}

static void

arm_linux_restart_syscall_init (const struct tramp_frame *self,

                                struct frame_info *this_frame,

                                struct trad_frame_cache *this_cache,

                                CORE_ADDR func)

{

  CORE_ADDR sp = get_frame_register_unsigned (this_frame, ARM_SP_REGNUM);

  trad_frame_set_reg_addr (this_cache, ARM_PC_REGNUM, sp);

  trad_frame_set_reg_value (this_cache, ARM_SP_REGNUM, sp + 12);

  /* Save a frame ID.  */

  trad_frame_set_id (this_cache, frame_id_build (sp, func));

}

static struct tramp_frame arm_linux_sigreturn_tramp_frame = {

  SIGTRAMP_FRAME,

  4,

  {

    { ARM_LINUX_SIGRETURN_INSTR, -1 },

    { TRAMP_SENTINEL_INSN }

  },

  arm_linux_sigreturn_init

};

static struct tramp_frame arm_linux_rt_sigreturn_tramp_frame = {

  SIGTRAMP_FRAME,

  4,

  {

    { ARM_LINUX_RT_SIGRETURN_INSTR, -1 },

    { TRAMP_SENTINEL_INSN }

  },

  arm_linux_rt_sigreturn_init

};

static struct tramp_frame arm_eabi_linux_sigreturn_tramp_frame = {

  SIGTRAMP_FRAME,

  4,

  {

    { ARM_SET_R7_SIGRETURN, -1 },

    { ARM_EABI_SYSCALL, -1 },

    { TRAMP_SENTINEL_INSN }

  },

  arm_linux_sigreturn_init

};

static struct tramp_frame arm_eabi_linux_rt_sigreturn_tramp_frame = {

  SIGTRAMP_FRAME,

  4,

  {

    { ARM_SET_R7_RT_SIGRETURN, -1 },

    { ARM_EABI_SYSCALL, -1 },

    { TRAMP_SENTINEL_INSN }

  },

  arm_linux_rt_sigreturn_init

};

static struct tramp_frame arm_linux_restart_syscall_tramp_frame = {

  NORMAL_FRAME,

  4,

  {

    { ARM_OABI_SYSCALL_RESTART_SYSCALL, -1 },

    { ARM_LDR_PC_SP_12, -1 },

    { TRAMP_SENTINEL_INSN }

  },

  arm_linux_restart_syscall_init

};

/* Core file and register set support.  */

#define ARM_LINUX_SIZEOF_GREGSET (18 * INT_REGISTER_SIZE)

void

arm_linux_supply_gregset (const struct regset *regset,

                          struct regcache *regcache,

                          int regnum, const void *gregs_buf, size_t len)

{

  struct gdbarch *gdbarch = get_regcache_arch (regcache);

  enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);

  const gdb_byte *gregs = gregs_buf;

  int regno;

  CORE_ADDR reg_pc;

  gdb_byte pc_buf[INT_REGISTER_SIZE];

  for (regno = ARM_A1_REGNUM; regno < ARM_PC_REGNUM; regno++)

    if (regnum == -1 || regnum == regno)

      regcache_raw_supply (regcache, regno,

                           gregs + INT_REGISTER_SIZE * regno);

  if (regnum == ARM_PS_REGNUM || regnum == -1)

    {

      if (arm_apcs_32)

        regcache_raw_supply (regcache, ARM_PS_REGNUM,

                             gregs + INT_REGISTER_SIZE * ARM_CPSR_GREGNUM);

      else

        regcache_raw_supply (regcache, ARM_PS_REGNUM,

                             gregs + INT_REGISTER_SIZE * ARM_PC_REGNUM);

    }

  if (regnum == ARM_PC_REGNUM || regnum == -1)

    {

      reg_pc = extract_unsigned_integer (gregs

                                         + INT_REGISTER_SIZE * ARM_PC_REGNUM,

                                         INT_REGISTER_SIZE, byte_order);

      reg_pc = gdbarch_addr_bits_remove (gdbarch, reg_pc);

      store_unsigned_integer (pc_buf, INT_REGISTER_SIZE, byte_order, reg_pc);

      regcache_raw_supply (regcache, ARM_PC_REGNUM, pc_buf);

    }

}

void

arm_linux_collect_gregset (const struct regset *regset,

                           const struct regcache *regcache,

                           int regnum, void *gregs_buf, size_t len)

{

  gdb_byte *gregs = gregs_buf;

  int regno;

  for (regno = ARM_A1_REGNUM; regno < ARM_PC_REGNUM; regno++)

    if (regnum == -1 || regnum == regno)

      regcache_raw_collect (regcache, regno,

                            gregs + INT_REGISTER_SIZE * regno);

  if (regnum == ARM_PS_REGNUM || regnum == -1)

    {

      if (arm_apcs_32)

        regcache_raw_collect (regcache, ARM_PS_REGNUM,

                              gregs + INT_REGISTER_SIZE * ARM_CPSR_GREGNUM);

      else

        regcache_raw_collect (regcache, ARM_PS_REGNUM,

                              gregs + INT_REGISTER_SIZE * ARM_PC_REGNUM);

    }

  if (regnum == ARM_PC_REGNUM || regnum == -1)

    regcache_raw_collect (regcache, ARM_PC_REGNUM,

                          gregs + INT_REGISTER_SIZE * ARM_PC_REGNUM);

}

/* Support for register format used by the NWFPE FPA emulator.  */

#define typeNone                0x00

#define typeSingle              0x01

#define typeDouble              0x02

#define typeExtended            0x03

void

supply_nwfpe_register (struct regcache *regcache, int regno,

                       const gdb_byte *regs)

{

  const gdb_byte *reg_data;

  gdb_byte reg_tag;

  gdb_byte buf[FP_REGISTER_SIZE];

  reg_data = regs + (regno - ARM_F0_REGNUM) * FP_REGISTER_SIZE;

  reg_tag = regs[(regno - ARM_F0_REGNUM) + NWFPE_TAGS_OFFSET];

  memset (buf, 0, FP_REGISTER_SIZE);

  switch (reg_tag)

    {

    case typeSingle:

      memcpy (buf, reg_data, 4);

      break;

    case typeDouble:

      memcpy (buf, reg_data + 4, 4);

      memcpy (buf + 4, reg_data, 4);

      break;

    case typeExtended:

      /* We want sign and exponent, then least significant bits,

         then most significant.  NWFPE does sign, most, least.  */

      memcpy (buf, reg_data, 4);

      memcpy (buf + 4, reg_data + 8, 4);

      memcpy (buf + 8, reg_data + 4, 4);

      break;

    default:

      break;

    }

  regcache_raw_supply (regcache, regno, buf);

}

void

collect_nwfpe_register (const struct regcache *regcache, int regno,

                        gdb_byte *regs)

{

  gdb_byte *reg_data;

  gdb_byte reg_tag;

  gdb_byte buf[FP_REGISTER_SIZE];

  regcache_raw_collect (regcache, regno, buf);

  /* NOTE drow/2006-06-07: This code uses the tag already in the

     register buffer.  I've preserved that when moving the code

     from the native file to the target file.  But this doesn't

     always make sense.  */

  reg_data = regs + (regno - ARM_F0_REGNUM) * FP_REGISTER_SIZE;

  reg_tag = regs[(regno - ARM_F0_REGNUM) + NWFPE_TAGS_OFFSET];

  switch (reg_tag)

    {

    case typeSingle:

      memcpy (reg_data, buf, 4);

      break;

    case typeDouble:

      memcpy (reg_data, buf + 4, 4);

      memcpy (reg_data + 4, buf, 4);

      break;

    case typeExtended:

      memcpy (reg_data, buf, 4);

      memcpy (reg_data + 4, buf + 8, 4);

      memcpy (reg_data + 8, buf + 4, 4);

      break;

    default:

      break;

    }

}

void

arm_linux_supply_nwfpe (const struct regset *regset,

                        struct regcache *regcache,

                        int regnum, const void *regs_buf, size_t len)

{

  const gdb_byte *regs = regs_buf;

  int regno;

  if (regnum == ARM_FPS_REGNUM || regnum == -1)

    regcache_raw_supply (regcache, ARM_FPS_REGNUM,

                         regs + NWFPE_FPSR_OFFSET);

  for (regno = ARM_F0_REGNUM; regno <= ARM_F7_REGNUM; regno++)

    if (regnum == -1 || regnum == regno)

      supply_nwfpe_register (regcache, regno, regs);

}

void

arm_linux_collect_nwfpe (const struct regset *regset,

                         const struct regcache *regcache,

                         int regnum, void *regs_buf, size_t len)

{

  gdb_byte *regs = regs_buf;

  int regno;

  for (regno = ARM_F0_REGNUM; regno <= ARM_F7_REGNUM; regno++)

    if (regnum == -1 || regnum == regno)

      collect_nwfpe_register (regcache, regno, regs);

  if (regnum == ARM_FPS_REGNUM || regnum == -1)

    regcache_raw_collect (regcache, ARM_FPS_REGNUM,

                          regs + INT_REGISTER_SIZE * ARM_FPS_REGNUM);

}

/* Return the appropriate register set for the core section identified

   by SECT_NAME and SECT_SIZE.  */

static const struct regset *

arm_linux_regset_from_core_section (struct gdbarch *gdbarch,

                                    const char *sect_name, size_t sect_size)

{

  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  if (strcmp (sect_name, ".reg") == 0

      && sect_size == ARM_LINUX_SIZEOF_GREGSET)

    {

      if (tdep->gregset == NULL)

        tdep->gregset = regset_alloc (gdbarch, arm_linux_supply_gregset,

                                      arm_linux_collect_gregset);

      return tdep->gregset;

    }

  if (strcmp (sect_name, ".reg2") == 0

      && sect_size == ARM_LINUX_SIZEOF_NWFPE)

    {

      if (tdep->fpregset == NULL)

        tdep->fpregset = regset_alloc (gdbarch, arm_linux_supply_nwfpe,

                                       arm_linux_collect_nwfpe);

      return tdep->fpregset;

    }

  return NULL;

}

/* Insert a single step breakpoint at the next executed instruction.  */

static int

arm_linux_software_single_step (struct frame_info *frame)

{

  struct gdbarch *gdbarch = get_frame_arch (frame);

  struct address_space *aspace = get_frame_address_space (frame);

  CORE_ADDR next_pc = arm_get_next_pc (frame, get_frame_pc (frame));

  /* The Linux kernel offers some user-mode helpers in a high page.  We can

     not read this page (as of 2.6.23), and even if we could then we couldn't

     set breakpoints in it, and even if we could then the atomic operations

     would fail when interrupted.  They are all called as functions and return

     to the address in LR, so step to there instead.  */

  if (next_pc > 0xffff0000)

    next_pc = get_frame_register_unsigned (frame, ARM_LR_REGNUM);

  insert_single_step_breakpoint (gdbarch, aspace, next_pc);

  return 1;

}

/* Support for displaced stepping of Linux SVC instructions.  */

static void

arm_linux_cleanup_svc (struct gdbarch *gdbarch ATTRIBUTE_UNUSED,

                       struct regcache *regs,

                       struct displaced_step_closure *dsc)

{

  CORE_ADDR from = dsc->insn_addr;

  ULONGEST apparent_pc;

  int within_scratch;

  regcache_cooked_read_unsigned (regs, ARM_PC_REGNUM, &apparent_pc);

  within_scratch = (apparent_pc >= dsc->scratch_base

                    && apparent_pc < (dsc->scratch_base

                                      + DISPLACED_MODIFIED_INSNS * 4 + 4));

  if (debug_displaced)

    {

      fprintf_unfiltered (gdb_stdlog, "displaced: PC is apparently %.8lx after "

                          "SVC step ", (unsigned long) apparent_pc);

      if (within_scratch)

        fprintf_unfiltered (gdb_stdlog, "(within scratch space)\n");

      else

        fprintf_unfiltered (gdb_stdlog, "(outside scratch space)\n");

    }

  if (within_scratch)

    displaced_write_reg (regs, dsc, ARM_PC_REGNUM, from + 4, BRANCH_WRITE_PC);

}

static int

arm_linux_copy_svc (struct gdbarch *gdbarch, uint32_t insn, CORE_ADDR to,

                    struct regcache *regs, struct displaced_step_closure *dsc)

{

  CORE_ADDR from = dsc->insn_addr;

  struct frame_info *frame;

  unsigned int svc_number = displaced_read_reg (regs, from, 7);

  if (debug_displaced)

    fprintf_unfiltered (gdb_stdlog, "displaced: copying Linux svc insn %.8lx\n",

                        (unsigned long) insn);

  frame = get_current_frame ();

  /* Is this a sigreturn or rt_sigreturn syscall?  Note: these are only useful

     for EABI.  */

  if (svc_number == 119 || svc_number == 173)

    {

      if (get_frame_type (frame) == SIGTRAMP_FRAME)

        {

          CORE_ADDR return_to;

          struct symtab_and_line sal;

          if (debug_displaced)

            fprintf_unfiltered (gdb_stdlog, "displaced: found "

              "sigreturn/rt_sigreturn SVC call. PC in frame = %lx\n",

              (unsigned long) get_frame_pc (frame));

          return_to = frame_unwind_caller_pc (frame);

          if (debug_displaced)

            fprintf_unfiltered (gdb_stdlog, "displaced: unwind pc = %lx. "

              "Setting momentary breakpoint.\n", (unsigned long) return_to);

          gdb_assert (inferior_thread ()->step_resume_breakpoint == NULL);

          sal = find_pc_line (return_to, 0);

          sal.pc = return_to;

          sal.section = find_pc_overlay (return_to);

          sal.explicit_pc = 1;

          frame = get_prev_frame (frame);

          if (frame)

            {

              inferior_thread ()->step_resume_breakpoint

                = set_momentary_breakpoint (gdbarch, sal, get_frame_id (frame),

                                            bp_step_resume);

              /* We need to make sure we actually insert the momentary

                 breakpoint set above.  */

              insert_breakpoints ();

            }

          else if (debug_displaced)

            fprintf_unfiltered (gdb_stderr, "displaced: couldn't find previous "

                                "frame to set momentary breakpoint for "

                                "sigreturn/rt_sigreturn\n");