Subversion Repositories openrisc_2011-10-31

/* s390-dis.c -- Disassemble S390 instructions

   Copyright 2000, 2001, 2002, 2003, 2005, 2007, 2008

   Free Software Foundation, Inc.

   Contributed by Martin Schwidefsky (schwidefsky@de.ibm.com).

   This file is part of the GNU opcodes library.

   This library is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 3, or (at your option)

   any later version.

   It is distributed in the hope that it will be useful, but WITHOUT

   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY

   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public

   License for more details.

   You should have received a copy of the GNU General Public License

   along with this file; see the file COPYING.  If not, write to the

   Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston,

   MA 02110-1301, USA.  */

#include <stdio.h>

#include "ansidecl.h"

#include "sysdep.h"

#include "dis-asm.h"

#include "opintl.h"

#include "opcode/s390.h"

static int init_flag = 0;

static int opc_index[256];

static int current_arch_mask = 0;

/* Set up index table for first opcode byte.  */

static void

init_disasm (struct disassemble_info *info)

{

  const struct s390_opcode *opcode;

  const struct s390_opcode *opcode_end;

  const char *p;

  memset (opc_index, 0, sizeof (opc_index));

  opcode_end = s390_opcodes + s390_num_opcodes;

  for (opcode = s390_opcodes; opcode < opcode_end; opcode++)

    {

      opc_index[(int) opcode->opcode[0]] = opcode - s390_opcodes;

      while ((opcode < opcode_end) &&

             (opcode[1].opcode[0] == opcode->opcode[0]))

        opcode++;

    }

  for (p = info->disassembler_options; p != NULL; )

    {

      if (CONST_STRNEQ (p, "esa"))

        current_arch_mask = 1 << S390_OPCODE_ESA;

      else if (CONST_STRNEQ (p, "zarch"))

        current_arch_mask = 1 << S390_OPCODE_ZARCH;

      else

        fprintf (stderr, "Unknown S/390 disassembler option: %s\n", p);

      p = strchr (p, ',');

      if (p != NULL)

        p++;

    }

  if (!current_arch_mask)

    switch (info->mach)

      {

      case bfd_mach_s390_31:

        current_arch_mask = 1 << S390_OPCODE_ESA;

        break;

      case bfd_mach_s390_64:

        current_arch_mask = 1 << S390_OPCODE_ZARCH;

        break;

      default:

        abort ();

      }

  init_flag = 1;

}

/* Extracts an operand value from an instruction.  */

/* We do not perform the shift operation for larl-type address

   operands here since that would lead to an overflow of the 32 bit

   integer value.  Instead the shift operation is done when printing

   the operand in print_insn_s390.  */

static inline unsigned int

s390_extract_operand (unsigned char *insn, const struct s390_operand *operand)

{

  unsigned int val;

  int bits;

  /* Extract fragments of the operand byte for byte.  */

  insn += operand->shift / 8;

  bits = (operand->shift & 7) + operand->bits;

  val = 0;

  do

    {

      val <<= 8;

      val |= (unsigned int) *insn++;

      bits -= 8;

    }

  while (bits > 0);

  val >>= -bits;

  val &= ((1U << (operand->bits - 1)) << 1) - 1;

  /* Check for special long displacement case.  */

  if (operand->bits == 20 && operand->shift == 20)

    val = (val & 0xff) << 12 | (val & 0xfff00) >> 8;

  /* Sign extend value if the operand is signed or pc relative.  */

  if ((operand->flags & (S390_OPERAND_SIGNED | S390_OPERAND_PCREL))

      && (val & (1U << (operand->bits - 1))))

    val |= (-1U << (operand->bits - 1)) << 1;

  /* Length x in an instructions has real length x + 1.  */

  if (operand->flags & S390_OPERAND_LENGTH)

    val++;

  return val;

}

/* Print a S390 instruction.  */

int

print_insn_s390 (bfd_vma memaddr, struct disassemble_info *info)

{

  bfd_byte buffer[6];

  const struct s390_opcode *opcode;

  const struct s390_opcode *opcode_end;

  unsigned int value;

  int status, opsize, bufsize;

  char separator;

  if (init_flag == 0)

    init_disasm (info);

  /* The output looks better if we put 6 bytes on a line.  */

  info->bytes_per_line = 6;

  /* Every S390 instruction is max 6 bytes long.  */

  memset (buffer, 0, 6);

  status = (*info->read_memory_func) (memaddr, buffer, 6, info);

  if (status != 0)

    {

      for (bufsize = 0; bufsize < 6; bufsize++)

        if ((*info->read_memory_func) (memaddr, buffer, bufsize + 1, info) != 0)

          break;

      if (bufsize <= 0)

        {

          (*info->memory_error_func) (status, memaddr, info);

          return -1;

        }

      /* Opsize calculation looks strange but it works

         00xxxxxx -> 2 bytes, 01xxxxxx/10xxxxxx -> 4 bytes,

         11xxxxxx -> 6 bytes.  */

      opsize = ((((buffer[0] >> 6) + 1) >> 1) + 1) << 1;

      status = opsize > bufsize;

    }

  else

    {

      bufsize = 6;

      opsize = ((((buffer[0] >> 6) + 1) >> 1) + 1) << 1;

    }

  if (status == 0)

    {

      /* Find the first match in the opcode table.  */

      opcode_end = s390_opcodes + s390_num_opcodes;

      for (opcode = s390_opcodes + opc_index[(int) buffer[0]];

           (opcode < opcode_end) && (buffer[0] == opcode->opcode[0]);

           opcode++)

        {

          const struct s390_operand *operand;

          const unsigned char *opindex;

          /* Check architecture.  */

          if (!(opcode->modes & current_arch_mask))

            continue;

          /* Check signature of the opcode.  */

          if ((buffer[1] & opcode->mask[1]) != opcode->opcode[1]

              || (buffer[2] & opcode->mask[2]) != opcode->opcode[2]

              || (buffer[3] & opcode->mask[3]) != opcode->opcode[3]

              || (buffer[4] & opcode->mask[4]) != opcode->opcode[4]

              || (buffer[5] & opcode->mask[5]) != opcode->opcode[5])

            continue;

          /* The instruction is valid.  */

          if (opcode->operands[0] != 0)

            (*info->fprintf_func) (info->stream, "%s\t", opcode->name);

          else

            (*info->fprintf_func) (info->stream, "%s", opcode->name);

          /* Extract the operands.  */

          separator = 0;

          for (opindex = opcode->operands; *opindex != 0; opindex++)

            {

              operand = s390_operands + *opindex;

              value = s390_extract_operand (buffer, operand);

              if ((operand->flags & S390_OPERAND_INDEX) && value == 0)

                continue;

              if ((operand->flags & S390_OPERAND_BASE) &&

                  value == 0 && separator == '(')

                {

                  separator = ',';

                  continue;

                }

              if (separator)

                (*info->fprintf_func) (info->stream, "%c", separator);

              if (operand->flags & S390_OPERAND_GPR)

                (*info->fprintf_func) (info->stream, "%%r%i", value);

              else if (operand->flags & S390_OPERAND_FPR)

                (*info->fprintf_func) (info->stream, "%%f%i", value);

              else if (operand->flags & S390_OPERAND_AR)

                (*info->fprintf_func) (info->stream, "%%a%i", value);

              else if (operand->flags & S390_OPERAND_CR)

                (*info->fprintf_func) (info->stream, "%%c%i", value);

              else if (operand->flags & S390_OPERAND_PCREL)

                (*info->print_address_func) (memaddr + (int)value + (int)value,

                                             info);

              else if (operand->flags & S390_OPERAND_SIGNED)

                (*info->fprintf_func) (info->stream, "%i", (int) value);

              else

                (*info->fprintf_func) (info->stream, "%u", value);

              if (operand->flags & S390_OPERAND_DISP)

                {

                  separator = '(';

                }

              else if (operand->flags & S390_OPERAND_BASE)

                {

                  (*info->fprintf_func) (info->stream, ")");

                  separator = ',';

                }

              else

                separator = ',';

            }

          /* Found instruction, printed it, return its size.  */

          return opsize;

        }

      /* No matching instruction found, fall through to hex print.  */

    }

  if (bufsize >= 4)

    {

      value = (unsigned int) buffer[0];

      value = (value << 8) + (unsigned int) buffer[1];

      value = (value << 8) + (unsigned int) buffer[2];

      value = (value << 8) + (unsigned int) buffer[3];

      (*info->fprintf_func) (info->stream, ".long\t0x%08x", value);

      return 4;

    }

  else if (bufsize >= 2)

    {

      value = (unsigned int) buffer[0];

      value = (value << 8) + (unsigned int) buffer[1];

      (*info->fprintf_func) (info->stream, ".short\t0x%04x", value);

      return 2;

    }

  else

    {

      value = (unsigned int) buffer[0];

      (*info->fprintf_func) (info->stream, ".byte\t0x%02x", value);

      return 1;

    }

}

void

print_s390_disassembler_options (FILE *stream)

{

  fprintf (stream, _("\n\

The following S/390 specific disassembler options are supported for use\n\

with the -M switch (multiple options should be separated by commas):\n"));

  fprintf (stream, _("  esa         Disassemble in ESA architecture mode\n"));

  fprintf (stream, _("  zarch       Disassemble in z/Architecture mode\n"));

}