Subversion Repositories openrisc_me

2010-02-11  Doug Evans  

        * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,

        * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,

        * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,

        * cris/semcrisv32f-switch.c: Regenerate.

2010-01-09  Ralf Wildenhues  

        * avr/configure: Regenerate.

        * cris/configure: Regenerate.

        * microblaze/configure: Regenerate.

2010-01-02  Doug Evans  

        * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,

        * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,

        * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,

        * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,

        * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,

        * cris/semcrisv32f-switch.c: Regenerate, update copyright year.

2010-01-01  Doug Evans  

        * cris/mloop.in: Fix copyright year update snafu.

2009-11-24  Joel Brobecker  

        * common/aclocal.m4: Add include of ../../config/zlib.m4.

        * common/common.m4: Use AM_ZLIB to check for zlib support.

        * ppc/configure.ac: Likewise.

        * arm/configure, avr/configure, common/configure, cr16/configure,

        cris/configure, d10v/configure, erc32/configure, frv/configure,

        h8300/configure, iq2000/configure, lm32/configure, m32c/configure,

        m32r/configure, m68hc11/configure, mcore/configure,

        microblaze/configure, mips/configure, mn10300/configure,

        moxie/configure, ppc/configure, sh/configure, sh64/configure,

        v850/configure: Regenerate.

2009-11-24  DJ Delorie  

        * rx: New directory.

        * configure.ac: Add entry for Renesas RX.

        * configure: Regenerate.

2009-11-22  Doug Evans  

        * cris/cpuall.h: Regenerate.

        * cris/cpuv10.h: Regenerate.

        * cris/cpuv32.h: Regenerate.

        * cris/decodev10.c: Regenerate.

        * cris/decodev10.h: Regenerate.

        * cris/decodev32.c: Regenerate.

        * cris/decodev32.h: Regenerate.

2009-11-12  Tristan Gingold  

        * avr/interp.c (sim_write): Allow byte access.

        (sim_read): Ditto.

2009-11-12  Tristan Gingold  

        * avr/interp.c (sim_load): Clear memory before loading.

2009-11-09  Tristan Gingold  

        * avr/interp.c (sim_resume): Fix typo for OP_ret.

2009-10-23  Doug Evans  

        * cris/arch.c: Regenerate.

        * cris/arch.h: Regenerate.

        * cris/cpuall.h: Regenerate.

        * cris/cpuv10.c: Regenerate.

        * cris/cpuv10.h: Regenerate.

        * cris/cpuv32.c: Regenerate.

        * cris/cpuv32.h: Regenerate.

        * cris/cris-desc.c: Regenerate.

        * cris/cris-desc.h: Regenerate.

        * cris/cris-opc.h: Regenerate.

        * cris/decodev10.c: Regenerate.

        * cris/decodev10.h: Regenerate.

        * cris/decodev32.c: Regenerate.

        * cris/decodev32.h: Regenerate.

        * cris/modelv10.c: Regenerate.

        * cris/modelv32.c: Regenerate.

        * cris/semcrisv10f-switch.c: Regenerate.

        * cris/semcrisv32f-switch.c: Regenerate.

2009-10-22  Tristan Gingold  

        * avr/interp.c (sim_stop): Return 1.

2009-10-16  Doug Evans  

        * MAINTAINERS: Add myself as m32r maintainer.

2009-10-15  Michael Egaer  

        * MAINTAINERS: Add self as MicroBlaze maintainer.

2009-10-14  Ben Elliston  

        * MAINTAINERS (common): Move myself to "past maintainers" section.

2009-10-06  Michael Eager  

        * microblaze/interp.c: Add include microblaze-dis.h.

2009-09-23  Michael Eager  

        * configure: Add microblaze-*.* (not regenerated).

        * configure.ac: Likewise.

        * microblaze/config.in: New.

        * microblaze/configure: Generate.

        * microblaze/configure.ac: New.

        * microblaze/interp.c: New.

        * microblaze/Makefile.in: New.

        * microblaze/microblaze.h: New.

        * microblaze/microblaze.isa: New.

        * microblaze/sim-main.h: New.

        * microblaze/sysdep.h: New.

2009-08-22  Ralf Wildenhues  

        * avr/config.in: Regenerate.

        * avr/configure: Likewise.

        * configure: Likewise.

        * cris/config.in: Likewise.

        * cris/configure: Likewise.

        * configure.ac: m4_include toplevel config/override.m4.

        * configure: Regenerate.

        * avr/configure: Regenerate.

        * cris/configure: Regenerate.

2009-07-30  Ralf Wildenhues  

        * Makefile.in (datarootdir): New variable.

2009-05-18  Jon Beniston 

        * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.

        * configure.ac: Add lm32 target.

        * lm32: New directory.

2009-05-11  Andrew Cagney  

        * MAINTAINERS: Orphan ppc.

2009-05-08  Kevin Buettner  

        * m32c/gdb-if.c (m32c_signal_to_host): Rename to

        m32c_signal_to_target.  Change signal return values from SIGILL,

        SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,

        TARGET_SIGNAL_SEGV, etc.  Fix all callers.

2009-04-30  Anthony Green  

        * MAINTAINERS: Add myself for the moxie port.

        * moxie: New directory.

        * configure.ac: Add entry for moxie.

        * configure: Regenerate.

2009-04-27  Tristan Gingold  

        * avr: New directory.

        * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.

        * avr/config.in: New file, generated by autoheader.

        * avr/configure: New file generated by autoconf.

        * configure.ac: Add avr.

        * configure: Regenerated.

2009-04-17  Carlos O'Donell  

        * Makefile.in: Add dummy install-pdf, html, and

        install-html targets.

2009-01-18  Hans-Peter Nilsson  

        * cris/sim-if.c: Include errno.h.

        (cris_start_address, cris_program_offset): New variables.

        (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option

        enums.

        (cris_options): New options --cris-program-offset and

        --cris-start-address.

        (cris_option_handler): Handle new options.

        (cris_program_offset_write, cris_set_section_offset_iterator)

        (cris_offset_sections, cris_offset_sections): New functions.

        (sim_load): Use cris_program_offset_write as function argument to

        cris_load_elf_file, not sim_write.

        (struct offsetinfo): New struct.

        (cris_handle_interpreter): Fix typo in comment.

        (sim_open): Call cris_offset_sections as soon as the bfd of the

        infile is available.  Gate bfd validity checks on abfd non-NULL.

        (sim_create_inferior): Let cris_start_address when != -1 override

        other start-address choices.

2009-01-06  Hans-Peter Nilsson  

        * cris/traps.c (abort): Define to call sim_io_error.

        (create_map): Make -1 imply a non-fixed address, not 0.  All

        callers changed.  Only prefer the next higher unmapped address if

        the last mapped address is no less than 0x40000000.  Check that

        the address to be mapped is not already mapped.  Update head

        comment.

        (unmap_pages): Don't call abort when recursive call fails, just

        note and return an error if a page in the range couldn't be unmapped.

        (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)

        (schedule, make_first_thread, cris_pipe_empty): New local variable sd.

        (cris_break_13_handler) : Handle

        non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,

        don't abort on page not being mapped.  Handle non-anon filemap

        with length padded to pagesize.

2009-01-03  Hans-Peter Nilsson  

        * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)

        (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)

        (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)

        (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)

        (TARGET_AT_CLKTCK): Remove redundant macros.

        (AUX_ENT): Adjust to use standard ELF AT_* macros.

        (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all

        callers.

        (sim_open): Also pass AT_SECURE.

        * cris/sim-main.h (struct _sim_cpu): New member

        set_target_thread_data.

        * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.

        * cris/crisv10f.c: Ditto.

        * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.

        (MY (f_specific_init)): Set new _sim_cpu member to new function.

        * cris/traps.c (TARGET_SYS_set_thread_area): Define.

        (cris_break_13_handler) : New

        case.

        * cris/traps.c (TARGET_SYS_exit_group): Define.

        (cris_break_13_handler): Handle it like the exit for the last

        thread.

        * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.

        (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.

        (cris_break_13_handler) : Update to

        2.6.27.  Set machine field to the BFD printable name of the

        machine.

        * cris/traps.c (TARGET_MAP_DENYWRITE): Define.

        (cris_break_13_handler) : Handle

        TARGET_MAP_DENYWRITE.

        * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)

        (TARGET_X_OK, TARGET_F_OK): Define.

        (cris_break_13_handler) : New case.

        * cris/semcrisv32f-switch.c: Regenerate.

2008-12-30  Hans-Peter Nilsson  

        * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit

        just a short CRIS-specific notice.  Tweak the wording for a

        failing architecture test.

        * cris/traps.c (TARGET_SYS_writev): New macro.

        (is_mapped_only, cris_dump_map): New functions.

        (cris_break_13_handler) : Handle more flags

        and prot combinations and a non-zero page-offset.  If

        TARGET_MAP_FIXED, unmap pages before mapping them.

        : When checking, allow any length

        argument.  Don't actually do anything.

        : New case.

        * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.

        * cris/sim-if.c: Include elf-bfd.h.

        (struct progbounds): New members end_loadmem, start_nonloadmem.

        (xprintf, eprintf): New functions, copied from common/sim-load.c.

        (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.

        (get_progbounds_iterator): Renamed from get_progbounds.  Make

        static.  Update head comment.  Set new struct progbounds members.

        (exec_load_addr, interp_load_addr, interp_start_addr): New static

        variables.

        (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)

        (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New

        functions.

        (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT

        handling to use auxv_entries.  Improve error message and checking

        for invalid programs.  Use new variable abfd for the program

        instead of for each access reaching into sd to get it.

        (sim_create_inferior): If non-zero, use interp_start_addr instead

        of the program start address.

        (cris_disassemble_insn): Remove incorrect and unclear, supposedly

        stale comment.  Always specify little-endian.

2008-07-29  Nick Clifton  

        * common/genmloop.sh: Add new parameter: -shell to specify the

        command interpreter to use to run the input file.  This is

        necessary because otherwise SHELL is taken from the user's

        environment, and not from the makefile that invoked this script

        and the user might not be running an sh-like shell.

        * cris/Makefile.in: Pass -shell parameter to genmloop.sh.

        * fr30/Makefile.in: Likewise.

        * frv/Makefile.in: Likewise.

        * i960/Makefile.in: Likewise.

        * iq2000/Makefile.in: Likewise.

        * m32r/Makefile.in: Likewise.

        * frv/mloop.in: Add missing start of line comment marker.

2008-07-11  Hans-Peter Nilsson  

        * cris/configure: Regenerate to track ../common/common.m4 changes.

        * cris/config.in: Ditto.

2008-06-06  Vladimir Prus  

            Daniel Jacobowitz  

            Joseph Myers  

        * cris/configure: Regenerate.

2008-05-09  Olivier Hainque  

        * ppc/altivec.igen (vperm): Latch inputs into temporaries.

2008-03-25  M R Swami Reddy 

        * MAINTAINERS: Add myself as maintainer of cr16 port.

2008-02-12  M Ranga Swami Reddy 

        Add simulator for National cr16 processor.

        * cr16: New directory.

        * configure.ac: Add entry for National cr16.

        * configure: Regenerate.

2008-02-05  DJ Delorie  

        * configure.ac (v850): V850 now has a testsuite.

        * configure (v850): Likewise.

2008-01-01  Daniel Jacobowitz  

        Updated copyright notices for most files.

2007-12-19  DJ Delorie  

        * frv/frv.c (frvbf_cut): Only look at the six LSBs of

        cut_point.

2007-10-22  Hans-Peter Nilsson  

        * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,

        cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,

        cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,

        cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,

        cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,

        cris/semcrisv32f-switch.c: Regenerate.

2007-08-24  Joel Brobecker  

        Switch the license of all files explicitly copyright the FSF

        to GPLv3.

2007-03-27  Brooks Moses  

        * Makefile.in: Add dummy "pdf" target.

2007-02-20  Hans-Peter Nilsson  

        * cris/traps.c (dump_statistics): Change format for cycle numbers

        to %llu and cast parameters to unsigned long long.

2007-02-16  Thiemo Seufer  

        * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.

2007-01-28  Manuel Lauss  

        * configure.ac (sh64-*-*): Change to sh64*-*-*.

        (sh-*-*): Change to sh*-*-*.

        * configure: Regenerated.

2007-01-09  Daniel Jacobowitz  

        Updated copyright notices for most files.

2006-12-20  Hans-Peter Nilsson  

        * Makefile.in (autoconf-common autoheader-common): Only run

        autoheader on subdirs with a file config.in.

        * configure.ac (common): Make the default "yes" for all targets

        with sim subdirs.

        * configure: Regenerate.

        * Makefile.in (autoconf-common autoheader-common): In documented

        usage, say SHELL=/bin/sh.

        (.PHONY): Add autoheader-common.

        * MAINTAINERS: Add self as authorized committer for *.

2006-10-02  Edgar E. Iglesias  

            Hans-Peter Nilsson  

        * cris/cris-sim.h (enum cris_unknown_syscall_action_type)

        (cris_unknown_syscall_action): Declare.

        * cris/sim-if.c (cris_unknown_syscall_action): Define.

        (cris_options): Add cris-unknown-syscall option.

        (cris_option_handler): Correct comment about and error message for

        invalid --cris-cycles argument.  Handle --cris-unknown-syscall.

        * cris/traps.c: Include stdarg.h

        (cris_unknown_syscall): New function.

        (cris_break_13_handler): Instead of sim_io_eprintf and

        sim_engine_halt, call cris_unknown_syscall to handle more or less

        unknown syscalls.  Adjust code as necessary to handle return

        value.

2006-09-30  Daniel Jacobowitz  

        * MAINTAINERS: Add Dave Brolley for sh64.

2006-09-30  Hans-Peter Nilsson  

        * cris/traps.c (TARGET_PIPE_BUF): New macro.

        (cris_pipe_empty): Correct initialization of "remaining".  Only

        adjust the "write" return value if more than TARGET_PIPE_BUF bytes

        are written.

2006-09-29  Hans-Peter Nilsson  

        * cris/configure.ac: Check for limits.h and sys/param.h.

        * cris/configure, cris/config.in: Rebuild.

        * cris/traps.c (SIM_PATHMAX): New macro.

        (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.

2006-08-08  Joel Sherrill 

        * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.

        * Makefile.in (FLAGS_TO_PASS): Include libdir.

        * configure: Regenerated.

2006-06-05  Daniel Jacobowitz  

        * cris/configure: Regenerated.

2006-05-31  Daniel Jacobowitz  

        * cris/configure: Regenerated.

2006-05-05  Andreas Schwab  

        * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.

        * configure: Regenerate.

        * Makefile.in (CFLAGS_FOR_BUILD): Define.

        (CC_FOR_BUILD): Don't override.

        (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.

2006-05-04  Daniel Jacobowitz  

        * MAINTAINERS: Add an "Authorized committers" section, and list

        DJ Delorie for v850.

2006-04-08  Hans-Peter Nilsson  

        * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.

2006-04-03  Hans-Peter Nilsson  

        * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.

        * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.

        (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.

        (all): Depend on rvdummy$(EXEEXT).

        * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for

        sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,

        default off.

        * cris/configure: Regenerate.

        * cris/cris-sim.h (cris_have_900000xxif): Declare here.

        (enum cris_interrupt_type, crisv10deliver_interrupt)

        (crisv32deliver_interrupt: New declarations.

        * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call

        sim_events_tickn and set state-events member work_pending when it's

        time for the next event.

        [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific

        interrupt-delivery function.

        * cris/crisv10f.c (MY (deliver_interrupt)): New function.

        * cris/crisv32f.c (MY (deliver_interrupt)): New function.

        * cris/devices.c: Include hw-device.h.

        (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.

        (device_io_write_buffer): Only perform 0x900000xx-functions if

        cris_have_900000xxif is nonzero.  Else if WITH_HW defined,

        call hw_io_write_buffer.  Add return 0 last in function.

        * cris/sim-if.c (cris_have_900000xxif): Now global.

        (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.

        Force "-model" option, effectively.

        * cris/sim-main.h (cris_interrupt_delivery_fn): New type.

        (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.

2006-04-02  Hans-Peter Nilsson  

        * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.

        (CRISV32F_OBJS): Remove semcrisv32f-switch.o.

        (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.

2006-03-13  DJ Delorie  

        * MAINTAINERS: Add self as m32c sim maintainer.

2006-02-23  Hans-Peter Nilsson  

        * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time

        mapping.

        (cris_break_13_handler) : New case.

2006-01-23  Jim Blandy  

        Add simulator for Renesas M32C and M16C.

        * m32c: New directory.

        * configure.ac: Add entry for Renesas M32C.

        * configure: Regenerate.

2006-01-10  Hans-Peter Nilsson  

        * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic

        cycle count for the current insn.

2005-12-06  Hans-Peter Nilsson  

        * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,

        cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,

        cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,

        cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.

2005-12-05  Hans-Peter Nilsson  

        * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,

        cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,

        cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,

        cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,

        cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,

        cris/semcrisv32f-switch.c: Regenerate.

2005-11-20  Hans-Peter Nilsson  

        * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.

        (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and

        TARGET_O_WRONLY.

        (cris_break_13_handler) : Add support for

        F_GETFL on fd 0, 1 and 2.

2005-11-17  Hans-Peter Nilsson  

        * cris/sim-main.h (struct _sim_cpu): New members last_syscall,

        last_open_fd, last_open_flags.

        * cris/traps.c: Don't include targ-vals.h.

        (TARGET_O_ACCMODE): Define.

        (cris_break_13_handler): Set new _sim_cpu members.

        : Support special case of F_GETFL.

        Rearrange code as switch.  Emit "unimplemented" abort for

        unimplemented fcntl calls.

        * cris/traps.c (TARGET_SYS_stat): Define.

        (syscall_stat32_map): Add entry for TARGET_SYS_stat.

        (cris_break_13_handler) : New case.

2005-11-16  Hans-Peter Nilsson  

        * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the

        low 32 bits are used after an unsigned long cast.

2005-05-28  Hans-Peter Nilsson  

        * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.

2005-05-26  Chris Demetriou  

        * MAINTAINERS: Update my mail address, move myself to the

        "Past maintainers" section.

2005-05-17  Corinna Vinschen  

        * configure.ac: Add igen to v850 build.

        * configure: Regenerate.

2005-04-29  Paul Brook  

        * common/callback.c (PIPE_BUF): Provide default definition.

        (os_lstat): Use stat if lstat is not available on the host.

        (os_ftruncate): Return EINVAL if not available on the host.

        (os_truncate): Ditto.

        * common/configure.ac: Check for lstat, truncate and ftruncate.

        * common/configure: Regenerate.

        * common/config.in: Regenerate.

2005-04-27  Paul Brook  

        * common/Make-common.in: Add $(EXEEXT) to "run".

2005-04-18  Hans-Peter Nilsson  

        * cris/traps.c (cris_break_13_handler) :

        For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't

        implemented.  In call to create_map, pad length argument to 8k.

2005-04-15  Corinna Vinschen  

        * configure.ac: Add explicit sh64 case.

        * configure: Regenerate.

2005-03-30  Paul Brook  

        * arm/wrapper.c: Provide SIGTRAP and SIGBUS.

2005-03-24  Hans-Peter Nilsson  

        * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to

        include cgen-ops.h in decodev10.c and decodev32.c.

        * cris/sim-main.h: Don't include cgen-ops.h here.

        * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,

        cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,

        cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,

        cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,

        cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,

        cris/semcrisv32f-switch.c: Regenerate.

        * cris/traps.c (cris_break_13_handler) 

        TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,

        sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.

2005-03-23  Mark Kettenis  

        * cris/configure: Regenerate.

2005-02-28  Jim Blandy  

        * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,

        mips/configure.ac, mn10300/configure.ac, v850/configure.ac:

        Regenerated, after change to common/aclocal.m4.

2005-02-18  Corinna Vinschen  

        * iq2000: New target subdirectory.

        * configure.ac: Add iq2000 target.

        * configure: Regenerate.

2005-01-29  Hans-Peter Nilsson  

        * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)

        (realclean, install): Fail if subdir make failed.

2005-01-28  Hans-Peter Nilsson  

        * cris: New directory, simulator for Axis Communications CRIS

        including CRIS v32, CGEN-based.

        * configure.ac: Add corresponding configury.

        * configure: Regenerate.

2005-01-17  Andrew Cagney  

        * configure.ac: For mips*-*-* and mn10300*-*-* configure the

        common directory.  Remove sparc*-*-* from list.

2005-01-11  Andrew Cagney  

        * Makefile.in (autoconf-common autoheader-common): Add --force to

        autoconf and autoheader.

        (autoconf-common autoheader-common)

        (autoconf-install autoheader-install): Check for configure.ac, not

        configure.in.

        * configure.ac: Delete AC_CONFIG_AUX_DIR.

        * configure: Re-generate.

2005-01-07  Andrew Cagney  

        * configure.ac: Replace configure.in.  Requires autoconf 2.59 and

        correctly calls AC_CONFIG_SUBDIRS.

        * configure: Re-generate.

2004-12-01  Andrew Cagney  

        * i960, h8500: Delete directory.

2004-11-12  Andrew Cagney  

        * d30v, fr30, mn10200, z8k: Delete directory.

2004-03-10  Ben Elliston  

        * MAINTAINERS: Update my mail address.

2004-01-26  Chris Demetriou  

        * configure.in (mips*-*-*): Configure in testsuite.

        * configure: Regenerate.

2003-10-08  Dave Brolley  

        * configure.in: Move frv handling to alphabetically correct placement.

2003-09-03  Andreas Schwab  

        * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).

2003-08-29  Dave Brolley  

        * MAINTAINERS: Add myself as maintainer of the FRV port.

2003-08-20  Michael Snyder  

            Dave Brolley  

        * frv/: New directory, simulator for the Fujitsu FRV.

        * configure.in: Add frv configury.

        * configure: Regenerate.

2003-08-10  Ben Elliston  

        * MAINTAINERS: Update my mail address.

2003-08-09  Andrew Cagney  

        * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop

        maintenance.  List igen and sh maintainers.  Mention that target

        and global maintainers pick up the slack.

2003-07-09  Michael Snyder  

        * configure.in: Add testsuite to extra_subdirs for sh.

        * configure: Regenerate.

2003-01-23  Nick Clifton  

        * Add sh2e support:

2002-04-02  Alexandre Oliva  

        * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.

2002-08-24  Geoffrey Keating  

        * MAINTAINERS: Update my email address.

2002-07-17  Andrew Cagney  

        * w65/: Delete directory.

2002-07-16  Andrew Cagney  

        * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.

        * configure: Re-generate.

2002-07-13  Andrew Cagney  

        * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.

        * configure: Re-generate.

2002-06-16  Andrew Cagney  

        * Makefile.in (autoconf-changelog autoheader-changelog): Let name,

        id, date and host to be overriden by NAME, ID, DATE and HOST

        respectfully.  Use ISO dates.

Thu Jun  6 12:34:13 2002  Andrew Cagney  

        * Makefile.in (ChangeLog): New makefile variable.

        * README-HACKING: Mention the ChangeLog makefile variable.

2002-06-01  Andrew Cagney  

        * tic80/: Delete directory.

2002-05-16  Stephane Carrez  

        * MAINTAINERS: Update my email address.

2002-03-06  Stephane Carrez  

        * MAINTAINERS: Record self as maintainer of m68hc11 simulator.

2002-03-01  Frank Ch. Eigler  

        * MAINTAINERS: Record self as a co-maintainer of just common/.

2002-02-07  Nick Clifton  

        * MAINTAINERS: Point to GDB files describing overall maintaince

        and check-in procedures.

2002-01-10  Nick Clifton  

        * MAINTAINERS: Add myself for ARM portions.

2001-10-19  Andrew Cagney  

        * configure.in: When Linux or NetBSD, enable PowerPC simulator.

        * configure: Re-generate.

2001-02-16  Ben Elliston  

        * MAINTAINERS: Add myself for common portions.

2001-01-15  Chris Demetriou  

        * MAINTAINERS: Added self and Andrew for the mips sim.

2000-10-25  Geoff Keating  

        * MAINTAINERS: Added self and Andrew for the ppc sim.

Thu Jul 27 21:26:26 2000  Andrew Cagney  

        From Stephane Carrez :

        * m68hc11: New directory.

        * configure.in: Add.

        * configure: Regenerate.

Tue Jul  4 13:43:54 2000  Andrew Cagney  

        * tic80: New directory.

        * configure.in: Add configury.

        * configure: Regenerate.

2000-04-20  Nick Clifton  

        * configure.in (extra_subdirs): Add testsuite to strongarm

        directories.

        * configure: Regenerate.

Sat Mar  4 16:48:54 2000  Andrew Cagney  

        * MAINTAINERS: New file.  Blank.

1999-11-18  Ben Elliston  

        * configure.in: Require autoconf 2.13 and remove obsolete

        invocation of AC_C_CROSS.

        * configure: Regenerate.

1999-09-29  Doug Evans  

        * configure.in: Configure the testsuite directory for thumb.

        * configure: Regenerate.

1999-07-16  Ben Elliston  

        * configure.in: Configure the testsuite directory for arm.

        * configure: Regenerate.

1999-04-08  Nick Clifton  

        * configure.in: Add support for MCore target.

        * configure: Regenerate.

1999-03-14  Stan Shebs  

        * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove

        RUNTEST instead of commenting out, fixes portability problem.

1999-02-08  Nick Clifton  

        * configure.in: Add support for StrongARM target.

        * configure: Regenerate.

1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)

        * configure.in: Require autoconf 2.12.1 or higher.

1998-12-08  James E Wilson  

        * configure.in (i960-*-*): Add.

        * configure: Rebuild.

Wed Nov  4 19:11:43 1998  Dave Brolley  

        * configure.in: Added case for fr30-*-*.

        * configure: Regenerated.

Fri Sep 25 10:12:19 1998  Christopher Faylor 

        * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program

        to allow successful operation on Windows.

Thu May 28 14:59:46 1998 Jillian Ye 

        * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make

        check can be invoked recursively.

Wed Apr 29 12:38:53 1998  Mark Alexander  

        * configure.in: Build simulator on sparclite and sparc86x targets.

        * configure: Regenerate.

Sun Apr 26 15:21:01 1998  Tom Tromey  

        * Makefile.in (autoconf-common autoheader-common): Don't pass -l

        to autoconf and autoheader.

Fri Apr 24 11:14:13 1998  Tom Tromey  

        * Makefile.in (autoconf-common autoheader-common): Pass `-l

        ../common' to autoconf and autoheader.  Unconditionally run

        autoconf in every subdir.

        (autoconf-changelog autoheader-changelog): Unconditionally run

        commands in every subdir.

        (autoconf-install autoheader-install): Likewise.

Tue Mar 24 17:12:43 1998  Stu Grossman  

        * Makefile.in:  Get SHELL from configure.

        * (FLAGS_TO_PASS):  Pass down SHELL.

        * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for

        NT native builds.

Tue Mar 24 11::18:00 1998  Joyce Janczyn  

        * configure.in (extra_subdirs): Enable igen for mn10300.

        * configure: Re-generate.