Subversion Repositories openrisc_me

# This file contains common code used by all simulators.

#

# SIM_AC_COMMON invokes AC macros used by all simulators and by the common

# directory.  It is intended to be invoked before any target specific stuff.

# SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate the Makefile.

# It is intended to be invoked last.

#

# The simulator's configure.in should look like:

#

# dnl Process this file with autoconf to produce a configure script.

# sinclude(../common/aclocal.m4)

# AC_PREREQ(2.5)dnl

# AC_INIT(Makefile.in)

#

# SIM_AC_COMMON

#

# ... target specific stuff ...

#

# SIM_AC_OUTPUT

# Include global overrides and fixes for Autoconf.

m4_include(../../config/override.m4)

sinclude([../../config/zlib.m4])

AC_DEFUN([SIM_AC_COMMON],

[

# autoconf.info says this should be called right after AC_INIT.

AC_CONFIG_HEADER(ifelse([$1],,config.h,[$1]):config.in)

AC_CANONICAL_SYSTEM

AC_ARG_PROGRAM

AC_PROG_CC

AC_PROG_INSTALL

# Put a plausible default for CC_FOR_BUILD in Makefile.

if test "x$cross_compiling" = "xno"; then

  CC_FOR_BUILD='$(CC)'

else

  CC_FOR_BUILD=gcc

fi

AC_SUBST(CC_FOR_BUILD)

AC_SUBST(CFLAGS)

AC_SUBST(HDEFINES)

AR=${AR-ar}

AC_SUBST(AR)

AC_PROG_RANLIB

dnl We don't use gettext, but bfd does.  So we do the appropriate checks

dnl to see if there are intl libraries we should link against.

ALL_LINGUAS=

ZW_GNU_GETTEXT_SISTER_DIR(../../intl)

# Check for common headers.

# FIXME: Seems to me this can cause problems for i386-windows hosts.

# At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*.

AC_CHECK_HEADERS(stdlib.h string.h strings.h unistd.h time.h)

AC_CHECK_HEADERS(sys/time.h sys/resource.h)

AC_CHECK_HEADERS(fcntl.h fpu_control.h)

AC_CHECK_HEADERS(dlfcn.h errno.h sys/stat.h)

AC_CHECK_FUNCS(getrusage time sigaction __setfpucw)

# Check for socket libraries

AC_CHECK_LIB(socket, bind)

AC_CHECK_LIB(nsl, gethostbyname)

. ${srcdir}/../../bfd/configure.host

dnl Standard (and optional) simulator options.

dnl Eventually all simulators will support these.

dnl Do not add any here that cannot be supported by all simulators.

dnl Do not add similar but different options to a particular simulator,

dnl all shall eventually behave the same way.

dnl We don't use automake, but we still want to support

dnl --enable-maintainer-mode.

USE_MAINTAINER_MODE=no

AC_ARG_ENABLE(maintainer-mode,

[  --enable-maintainer-mode             Enable developer functionality.],

[case "${enableval}" in

  yes)  MAINT="" USE_MAINTAINER_MODE=yes ;;

  no)   MAINT="#" ;;

  *)    AC_MSG_ERROR("--enable-maintainer-mode does not take a value"); MAINT="#" ;;

esac

if test x"$silent" != x"yes" && test x"$MAINT" = x""; then

  echo "Setting maintainer mode" 6>&1

fi],[MAINT="#"])dnl

AC_SUBST(MAINT)

dnl This is a generic option to enable special byte swapping

dnl insns on *any* cpu.

AC_ARG_ENABLE(sim-bswap,

[  --enable-sim-bswap                   Use Host specific BSWAP instruction.],

[case "${enableval}" in

  yes)  sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;

  no)   sim_bswap="-DWITH_BSWAP=0";;

  *)    AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";;

esac

if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then

  echo "Setting bswap flags = $sim_bswap" 6>&1

fi],[sim_bswap=""])dnl

AC_SUBST(sim_bswap)

AC_ARG_ENABLE(sim-cflags,

[  --enable-sim-cflags=opts             Extra CFLAGS for use in building simulator],

[case "${enableval}" in

  yes)   sim_cflags="-O2 -fomit-frame-pointer";;

  trace) AC_MSG_ERROR("Please use --enable-sim-debug instead."); sim_cflags="";;

  no)    sim_cflags="";;

  *)     sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;

esac

if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then

  echo "Setting sim cflags = $sim_cflags" 6>&1

fi],[sim_cflags=""])dnl

AC_SUBST(sim_cflags)

dnl --enable-sim-debug is for developers of the simulator

dnl the allowable values are work-in-progress

AC_ARG_ENABLE(sim-debug,

[  --enable-sim-debug=opts              Enable debugging flags],

[case "${enableval}" in

  yes) sim_debug="-DDEBUG=7 -DWITH_DEBUG=7";;

  no)  sim_debug="-DDEBUG=0 -DWITH_DEBUG=0";;

  *)   sim_debug="-DDEBUG='(${enableval})' -DWITH_DEBUG='(${enableval})'";;

esac

if test x"$silent" != x"yes" && test x"$sim_debug" != x""; then

  echo "Setting sim debug = $sim_debug" 6>&1

fi],[sim_debug=""])dnl

AC_SUBST(sim_debug)

dnl --enable-sim-stdio is for users of the simulator

dnl It determines if IO from the program is routed through STDIO (buffered)

AC_ARG_ENABLE(sim-stdio,

[  --enable-sim-stdio                   Specify whether to use stdio for console input/output.],

[case "${enableval}" in

  yes)  sim_stdio="-DWITH_STDIO=DO_USE_STDIO";;

  no)   sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";;

  *)    AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-stdio"); sim_stdio="";;

esac

if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then

  echo "Setting stdio flags = $sim_stdio" 6>&1

fi],[sim_stdio=""])dnl

AC_SUBST(sim_stdio)

dnl --enable-sim-trace is for users of the simulator

dnl The argument is either a bitmask of things to enable [exactly what is

dnl up to the simulator], or is a comma separated list of names of tracing

dnl elements to enable.  The latter is only supported on simulators that

dnl use WITH_TRACE.

AC_ARG_ENABLE(sim-trace,

[  --enable-sim-trace=opts              Enable tracing flags],

[case "${enableval}" in

  yes)  sim_trace="-DTRACE=1 -DWITH_TRACE=-1";;

  no)   sim_trace="-DTRACE=0 -DWITH_TRACE=0";;

  [[-0-9]]*)

        sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;

  [[a-z]]*)

        sim_trace=""

        for x in `echo "$enableval" | sed -e "s/,/ /g"`; do

          if test x"$sim_trace" = x; then

            sim_trace="-DWITH_TRACE='(TRACE_$x"

          else

            sim_trace="${sim_trace}|TRACE_$x"

          fi

        done

        sim_trace="$sim_trace)'" ;;

esac

if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then

  echo "Setting sim trace = $sim_trace" 6>&1

fi],[sim_trace=""])dnl

AC_SUBST(sim_trace)

dnl --enable-sim-profile

dnl The argument is either a bitmask of things to enable [exactly what is

dnl up to the simulator], or is a comma separated list of names of profiling

dnl elements to enable.  The latter is only supported on simulators that

dnl use WITH_PROFILE.

AC_ARG_ENABLE(sim-profile,

[  --enable-sim-profile=opts            Enable profiling flags],

[case "${enableval}" in

  yes)  sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1";;

  no)   sim_profile="-DPROFILE=0 -DWITH_PROFILE=0";;

  [[-0-9]]*)

        sim_profile="-DPROFILE='(${enableval})' -DWITH_PROFILE='(${enableval})'";;

  [[a-z]]*)

        sim_profile=""

        for x in `echo "$enableval" | sed -e "s/,/ /g"`; do

          if test x"$sim_profile" = x; then

            sim_profile="-DWITH_PROFILE='(PROFILE_$x"

          else

            sim_profile="${sim_profile}|PROFILE_$x"

          fi

        done

        sim_profile="$sim_profile)'" ;;

esac

if test x"$silent" != x"yes" && test x"$sim_profile" != x""; then

  echo "Setting sim profile = $sim_profile" 6>&1

fi],[sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1"])dnl

AC_SUBST(sim_profile)

dnl Types used by common code

AC_TYPE_SIGNAL

dnl Detect exe extension

AC_EXEEXT

dnl These are available to append to as desired.

sim_link_files=

sim_link_links=

dnl Create tconfig.h either from simulator's tconfig.in or default one

dnl in common.

sim_link_links=tconfig.h

if test -f ${srcdir}/tconfig.in

then

  sim_link_files=tconfig.in

else

  sim_link_files=../common/tconfig.in

fi

# targ-vals.def points to the libc macro description file.

case "${target}" in

*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;

esac

sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"

sim_link_links="${sim_link_links} targ-vals.def"

]) dnl End of SIM_AC_COMMON

dnl Additional SIM options that can (optionally) be configured

dnl For optional simulator options, a macro SIM_AC_OPTION_* is defined.

dnl Simulators that wish to use the relevant option specify the macro

dnl in the simulator specific configure.in file between the SIM_AC_COMMON

dnl and SIM_AC_OUTPUT lines.

dnl Specify the running environment.

dnl If the simulator invokes this in its configure.in then without this option

dnl the default is the user environment and all are runtime selectable.

dnl If the simulator doesn't invoke this, only the user environment is

dnl supported.

dnl ??? Until there is demonstrable value in doing something more complicated,

dnl let's not.

AC_DEFUN([SIM_AC_OPTION_ENVIRONMENT],

[

AC_ARG_ENABLE(sim-environment,

[  --enable-sim-environment=environment Specify mixed, user, virtual or operating environment.],

[case "${enableval}" in

  all | ALL)             sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;

  user | USER)           sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;

  virtual | VIRTUAL)     sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;

  operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;

  *)   AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-environment");

       sim_environment="";;

esac

if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then

  echo "Setting sim environment = $sim_environment" 6>&1

fi],

[sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"])dnl

])

AC_SUBST(sim_environment)

dnl Specify the alignment restrictions of the target architecture.

dnl Without this option all possible alignment restrictions are accommodated.

dnl arg[1] is hardwired target alignment

dnl arg[2] is default target alignment

AC_DEFUN([SIM_AC_OPTION_ALIGNMENT],

wire_alignment="[$1]"

default_alignment="[$2]"

[

AC_ARG_ENABLE(sim-alignment,

[  --enable-sim-alignment=align         Specify strict,  nonstrict or forced alignment of memory accesses.],

[case "${enableval}" in

  strict | STRICT)       sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;

  nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;

  forced | FORCED)       sim_alignment="-DWITH_ALIGNMENT=FORCED_ALIGNMENT";;

  yes) if test x"$wire_alignment" != x; then

         sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"

       else

         if test x"$default_alignment" != x; then

           sim_alignment="-DWITH_ALIGNMENT=${default_alignment}"

         else

           echo "No hard-wired alignment for target $target" 1>&6

           sim_alignment="-DWITH_ALIGNMENT=0"

         fi

       fi;;

  no)  if test x"$default_alignment" != x; then

         sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"

       else

         if test x"$wire_alignment" != x; then

           sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${wire_alignment}"

         else

           echo "No default alignment for target $target" 1>&6

           sim_alignment="-DWITH_DEFAULT_ALIGNMENT=0"

         fi

       fi;;

  *)   AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";;

esac

if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then

  echo "Setting alignment flags = $sim_alignment" 6>&1

fi],

[if test x"$default_alignment" != x; then

  sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"

else

  if test x"$wire_alignment" != x; then

    sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"

  else

    sim_alignment=

  fi

fi])dnl

])dnl

AC_SUBST(sim_alignment)

dnl Conditionally compile in assertion statements.

AC_DEFUN([SIM_AC_OPTION_ASSERT],

[

AC_ARG_ENABLE(sim-assert,

[  --enable-sim-assert                  Specify whether to perform random assertions.],

[case "${enableval}" in

  yes)  sim_assert="-DWITH_ASSERT=1";;

  no)   sim_assert="-DWITH_ASSERT=0";;

  *)    AC_MSG_ERROR("--enable-sim-assert does not take a value"); sim_assert="";;

esac

if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then

  echo "Setting assert flags = $sim_assert" 6>&1

fi],[sim_assert=""])dnl

])

AC_SUBST(sim_assert)

dnl --enable-sim-bitsize is for developers of the simulator

dnl It specifies the number of BITS in the target.

dnl arg[1] is the number of bits in a word

dnl arg[2] is the number assigned to the most significant bit

dnl arg[3] is the number of bits in an address

dnl arg[4] is the number of bits in an OpenFirmware cell.

dnl FIXME: this information should be obtained from bfd/archure

AC_DEFUN([SIM_AC_OPTION_BITSIZE],

wire_word_bitsize="[$1]"

wire_word_msb="[$2]"

wire_address_bitsize="[$3]"

wire_cell_bitsize="[$4]"

[AC_ARG_ENABLE(sim-bitsize,

[  --enable-sim-bitsize=N               Specify target bitsize (32 or 64).],

[sim_bitsize=

case "${enableval}" in

  64,63 | 64,63,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63";;

  32,31 | 32,31,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31";;

  64,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;

  32,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;

  32) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then

        sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31"

      else

        sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0"

      fi ;;

  64) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then

        sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63"

      else

        sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=0"

      fi ;;

  *)  AC_MSG_ERROR("--enable-sim-bitsize was given $enableval.  Expected 32 or 64") ;;

esac

# address bitsize

tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9]]*,*//"`

case x"${tmp}" in

  x ) ;;

  x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=32" ;;

  x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=64" ;;

  * ) AC_MSG_ERROR("--enable-sim-bitsize was given address size $enableval.  Expected 32 or 64") ;;

esac

# cell bitsize

tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9*]]*,*[[0-9]]*,*//"`

case x"${tmp}" in

  x ) ;;

  x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=32" ;;

  x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=64" ;;

  * ) AC_MSG_ERROR("--enable-sim-bitsize was given cell size $enableval.  Expected 32 or 64") ;;

esac

if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then

  echo "Setting bitsize flags = $sim_bitsize" 6>&1

fi],

[sim_bitsize=""

if test x"$wire_word_bitsize" != x; then

  sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_BITSIZE=$wire_word_bitsize"

fi

if test x"$wire_word_msb" != x; then

  sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_MSB=$wire_word_msb"

fi

if test x"$wire_address_bitsize" != x; then

  sim_bitsize="$sim_bitsize -DWITH_TARGET_ADDRESS_BITSIZE=$wire_address_bitsize"

fi

if test x"$wire_cell_bitsize" != x; then

  sim_bitsize="$sim_bitsize -DWITH_TARGET_CELL_BITSIZE=$wire_cell_bitsize"

fi])dnl

])

AC_SUBST(sim_bitsize)

dnl --enable-sim-endian={yes,no,big,little} is for simulators

dnl that support both big and little endian targets.

dnl arg[1] is hardwired target endianness.

dnl arg[2] is default target endianness.

AC_DEFUN([SIM_AC_OPTION_ENDIAN],

[

wire_endian="[$1]"

default_endian="[$2]"

AC_ARG_ENABLE(sim-endian,

[  --enable-sim-endian=endian           Specify target byte endian orientation.],

[case "${enableval}" in

  b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;

  l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;

  yes)   if test x"$wire_endian" != x; then

           sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"

         else

           if test x"$default_endian" != x; then

             sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"

           else

             echo "No hard-wired endian for target $target" 1>&6

             sim_endian="-DWITH_TARGET_BYTE_ORDER=0"

           fi

         fi;;

  no)    if test x"$default_endian" != x; then

           sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"

         else

           if test x"$wire_endian" != x; then

             sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"

           else

             echo "No default endian for target $target" 1>&6

             sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"

           fi

         fi;;

  *)     AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";;

esac

if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then

  echo "Setting endian flags = $sim_endian" 6>&1

fi],

[if test x"$default_endian" != x; then

  sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"

else

  if test x"$wire_endian" != x; then

    sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"

  else

    sim_endian=

  fi

fi])dnl

])

AC_SUBST(sim_endian)

dnl --enable-sim-hostendian is for users of the simulator when

dnl they find that AC_C_BIGENDIAN does not function correctly

dnl (for instance in a canadian cross)

AC_DEFUN([SIM_AC_OPTION_HOSTENDIAN],

[

AC_ARG_ENABLE(sim-hostendian,

[  --enable-sim-hostendian=end          Specify host byte endian orientation.],

[case "${enableval}" in

  no)    sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;

  b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;

  l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;

  *)     AC_MSG_ERROR("Unknown value $enableval for --enable-sim-hostendian"); sim_hostendian="";;

esac

if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then

  echo "Setting hostendian flags = $sim_hostendian" 6>&1

fi],[

if test "x$cross_compiling" = "xno"; then

  AC_C_BIGENDIAN

  if test $ac_cv_c_bigendian = yes; then

    sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"

  else

    sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"

  fi

else

  sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"

fi])dnl

])

AC_SUBST(sim_hostendian)

dnl --enable-sim-float is for developers of the simulator

dnl It specifies the presence of hardware floating point

dnl And optionally the bitsize of the floating point register.

dnl arg[1] specifies the presence (or absence) of floating point hardware

dnl arg[2] specifies the number of bits in a floating point register

AC_DEFUN([SIM_AC_OPTION_FLOAT],

[

default_sim_float="[$1]"

default_sim_float_bitsize="[$2]"

AC_ARG_ENABLE(sim-float,

[  --enable-sim-float                   Specify that the target processor has floating point hardware.],

[case "${enableval}" in

  yes | hard)   sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;

  no | soft)    sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;

  32)           sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=32";;

  64)           sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=64";;

  *)            AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-float"); sim_float="";;

esac

if test x"$silent" != x"yes" && test x"$sim_float" != x""; then

  echo "Setting float flags = $sim_float" 6>&1

fi],[

sim_float=

if test x"${default_sim_float}" != x""; then

  sim_float="-DWITH_FLOATING_POINT=${default_sim_float}"

fi

if test x"${default_sim_float_bitsize}" != x""; then

  sim_float="$sim_float -DWITH_TARGET_FLOATING_POINT_BITSIZE=${default_sim_float_bitsize}"

fi

])dnl

])

AC_SUBST(sim_float)

dnl The argument is the default cache size if none is specified.

AC_DEFUN([SIM_AC_OPTION_SCACHE],

[

default_sim_scache="ifelse([$1],,0,[$1])"

AC_ARG_ENABLE(sim-scache,

[  --enable-sim-scache=size             Specify simulator execution cache size.],

[case "${enableval}" in

  yes)  sim_scache="-DWITH_SCACHE=${default_sim_scache}";;

  no)   sim_scache="-DWITH_SCACHE=0" ;;

  [[0-9]]*) sim_scache="-DWITH_SCACHE=${enableval}";;

  *)    AC_MSG_ERROR("Bad value $enableval passed to --enable-sim-scache");

        sim_scache="";;

esac

if test x"$silent" != x"yes" && test x"$sim_scache" != x""; then

  echo "Setting scache size = $sim_scache" 6>&1

fi],[sim_scache="-DWITH_SCACHE=${default_sim_scache}"])

])

AC_SUBST(sim_scache)

dnl The argument is the default model if none is specified.

AC_DEFUN([SIM_AC_OPTION_DEFAULT_MODEL],

[

default_sim_default_model="ifelse([$1],,0,[$1])"

AC_ARG_ENABLE(sim-default-model,

[  --enable-sim-default-model=model     Specify default model to simulate.],

[case "${enableval}" in

  yes|no) AC_MSG_ERROR("Missing argument to --enable-sim-default-model");;

  *)    sim_default_model="-DWITH_DEFAULT_MODEL='\"${enableval}\"'";;

esac

if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then

  echo "Setting default model = $sim_default_model" 6>&1

fi],[sim_default_model="-DWITH_DEFAULT_MODEL='\"${default_sim_default_model}\"'"])

])

AC_SUBST(sim_default_model)

dnl --enable-sim-hardware is for users of the simulator

dnl arg[1] Enable sim-hw by default? ("yes" or "no")

dnl arg[2] is a space separated list of devices that override the defaults

dnl arg[3] is a space separated list of extra target specific devices.

AC_DEFUN([SIM_AC_OPTION_HARDWARE],

[

if test x"[$1]" = x"yes"; then

  sim_hw_p=yes

else

  sim_hw_p=no

fi

if test "[$2]"; then

  hardware="core pal glue"

else

  hardware="core pal glue [$3]"

fi

sim_hw_cflags="-DWITH_HW=1"

sim_hw="$hardware"

sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([[^ ]][[^ ]]*\)/dv-\1.o/g'`"

AC_ARG_ENABLE(sim-hardware,

[  --enable-sim-hardware=LIST           Specify the hardware to be included in the build.],

[

case "${enableval}" in

  yes)  sim_hw_p=yes;;

  no)   sim_hw_p=no;;

  ,*)   sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;

  *,)   sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;

  *)    sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;

esac

if test "$sim_hw_p" != yes; then

  sim_hw_objs=

  sim_hw_cflags="-DWITH_HW=0"

  sim_hw=

else

  sim_hw_cflags="-DWITH_HW=1"

  # remove duplicates

  sim_hw=""

  sim_hw_objs="\$(SIM_COMMON_HW_OBJS)"

  for i in $hardware ; do

    case " $sim_hw " in

      *" $i "*) ;;

      *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;

    esac

  done

fi

if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then

  echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"

fi],[

if test "$sim_hw_p" != yes; then

  sim_hw_objs=

  sim_hw_cflags="-DWITH_HW=0"

  sim_hw=

fi

if test x"$silent" != x"yes"; then

  echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"

fi])dnl

])

AC_SUBST(sim_hw_cflags)

AC_SUBST(sim_hw_objs)

AC_SUBST(sim_hw)

dnl --enable-sim-inline is for users that wish to ramp up the simulator's

dnl performance by inlining functions.

dnl Guarantee that unconfigured simulators do not do any inlining

sim_inline="-DDEFAULT_INLINE=0"

AC_DEFUN([SIM_AC_OPTION_INLINE],

[

default_sim_inline="ifelse([$1],,,-DDEFAULT_INLINE=[$1])"

AC_ARG_ENABLE(sim-inline,

[  --enable-sim-inline=inlines          Specify which functions should be inlined.],

[sim_inline=""

case "$enableval" in

  no)           sim_inline="-DDEFAULT_INLINE=0";;

  0)            sim_inline="-DDEFAULT_INLINE=0";;

  yes | 2)      sim_inline="-DDEFAULT_INLINE=ALL_C_INLINE";;

  1)            sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";;

  *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do

       new_flag=""

       case "$x" in

         *_INLINE=*)    new_flag="-D$x";;

         *=*)           new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;

         *_INLINE)      new_flag="-D$x=ALL_C_INLINE";;

         *)             new_flag="-D$x""_INLINE=ALL_C_INLINE";;

       esac

       if test x"$sim_inline" = x""; then

         sim_inline="$new_flag"

       else

         sim_inline="$sim_inline $new_flag"

       fi

     done;;

esac

if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then

  echo "Setting inline flags = $sim_inline" 6>&1

fi],[

if test "x$cross_compiling" = "xno"; then

  if test x"$GCC" != "x" -a x"${default_sim_inline}" != "x" ; then

    sim_inline="${default_sim_inline}"

    if test x"$silent" != x"yes"; then

      echo "Setting inline flags = $sim_inline" 6>&1

    fi

  else

    sim_inline=""

  fi

else

  sim_inline="-DDEFAULT_INLINE=0"

fi])dnl

])

AC_SUBST(sim_inline)

AC_DEFUN([SIM_AC_OPTION_PACKAGES],

[

AC_ARG_ENABLE(sim-packages,

[  --enable-sim-packages=list           Specify the packages to be included in the build.],

[packages=disklabel

case "${enableval}" in

  yes)  ;;

  no)   AC_MSG_ERROR("List of packages must be specified for --enable-sim-packages"); packages="";;

  ,*)   packages="${packages}${enableval}";;

  *,)   packages="${enableval}${packages}";;

  *)    packages="${enableval}"'';;

esac

sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`

sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`

if test x"$silent" != x"yes" && test x"$packages" != x""; then

  echo "Setting packages to $sim_pk_src, $sim_pk_obj"

fi],[packages=disklabel

sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`

sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`

if test x"$silent" != x"yes"; then

  echo "Setting packages to $sim_pk_src, $sim_pk_obj"

fi])dnl

])

AC_SUBST(sim_packages)

AC_DEFUN([SIM_AC_OPTION_REGPARM],

[

AC_ARG_ENABLE(sim-regparm,

[  --enable-sim-regparm=nr-parm         Pass parameters in registers instead of on the stack - x86/GCC specific.],

[case "${enableval}" in

  0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) sim_regparm="-DWITH_REGPARM=${enableval}";;

  no)                            sim_regparm="" ;;

  yes)                           sim_regparm="-DWITH_REGPARM=3";;

  *)   AC_MSG_ERROR("Unknown value $enableval for --enable-sim-regparm"); sim_regparm="";;

esac

if test x"$silent" != x"yes" && test x"$sim_regparm" != x""; then

  echo "Setting regparm flags = $sim_regparm" 6>&1

fi],[sim_regparm=""])dnl

])

AC_SUBST(sim_regparm)

AC_DEFUN([SIM_AC_OPTION_RESERVED_BITS],

[

default_sim_reserved_bits="ifelse([$1],,1,[$1])"

AC_ARG_ENABLE(sim-reserved-bits,

[  --enable-sim-reserved-bits           Specify whether to check reserved bits in instruction.],

[case "${enableval}" in

  yes)  sim_reserved_bits="-DWITH_RESERVED_BITS=1";;

  no)   sim_reserved_bits="-DWITH_RESERVED_BITS=0";;

  *)    AC_MSG_ERROR("--enable-sim-reserved-bits does not take a value"); sim_reserved_bits="";;

esac

if test x"$silent" != x"yes" && test x"$sim_reserved_bits" != x""; then

  echo "Setting reserved flags = $sim_reserved_bits" 6>&1

fi],[sim_reserved_bits="-DWITH_RESERVED_BITS=${default_sim_reserved_bits}"])dnl

])

AC_SUBST(sim_reserved_bits)

AC_DEFUN([SIM_AC_OPTION_SMP],

[

default_sim_smp="ifelse([$1],,5,[$1])"

AC_ARG_ENABLE(sim-smp,

[  --enable-sim-smp=n                   Specify number of processors to configure for (default ${default_sim_smp}).],

[case "${enableval}" in

  yes)  sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5";;

  no)   sim_smp="-DWITH_SMP=0" ; sim_igen_smp="-N 0";;

  *)    sim_smp="-DWITH_SMP=$enableval" ; sim_igen_smp="-N $enableval";;

esac

if test x"$silent" != x"yes" && test x"$sim_smp" != x""; then

  echo "Setting smp flags = $sim_smp" 6>&1

fi],[sim_smp="-DWITH_SMP=${default_sim_smp}" ; sim_igen_smp="-N ${default_sim_smp}"

if test x"$silent" != x"yes"; then

  echo "Setting smp flags = $sim_smp" 6>&1

fi])dnl

])

AC_SUBST(sim_smp)

AC_DEFUN([SIM_AC_OPTION_STDCALL],

[

AC_ARG_ENABLE(sim-stdcall,

[  --enable-sim-stdcall=type            Use an alternative function call/return mechanism - x86/GCC specific.],

[case "${enableval}" in

  no)           sim_stdcall="" ;;

  std*)         sim_stdcall="-DWITH_STDCALL=1";;

  yes)          sim_stdcall="-DWITH_STDCALL=1";;

  *)   AC_MSG_ERROR("Unknown value $enableval for --enable-sim-stdcall"); sim_stdcall="";;

esac

if test x"$silent" != x"yes" && test x"$sim_stdcall" != x""; then

  echo "Setting function call flags = $sim_stdcall" 6>&1

fi],[sim_stdcall=""])dnl

])

AC_SUBST(sim_stdcall)

AC_DEFUN([SIM_AC_OPTION_XOR_ENDIAN],

[

default_sim_xor_endian="ifelse([$1],,8,[$1])"

AC_ARG_ENABLE(sim-xor-endian,

[  --enable-sim-xor-endian=n            Specify number bytes involved in XOR bi-endian mode (default ${default_sim_xor_endian}).],

[case "${enableval}" in

  yes)  sim_xor_endian="-DWITH_XOR_ENDIAN=8";;

  no)   sim_xor_endian="-DWITH_XOR_ENDIAN=0";;

  *)    sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";;

esac

if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then

  echo "Setting xor-endian flag = $sim_xor_endian" 6>&1

fi],[sim_xor_endian="-DWITH_XOR_ENDIAN=${default_sim_xor_endian}"])dnl

])

AC_SUBST(sim_xor_endian)

dnl --enable-build-warnings is for developers of the simulator.

dnl it enables extra GCC specific warnings.

AC_DEFUN([SIM_AC_OPTION_WARNINGS],

[

# NOTE: Don't add -Wall or -Wunused, they both include

# -Wunused-parameter which reports bogus warnings.

# NOTE: If you add to this list, remember to update

# gdb/doc/gdbint.texinfo.

build_warnings="-Wimplicit -Wreturn-type -Wcomment -Wtrigraphs \

-Wformat -Wparentheses -Wpointer-arith"

# GCC supports -Wuninitialized only with -O or -On, n != 0.

if test x${CFLAGS+set} = xset; then

  case "${CFLAGS}" in

    *"-O0"* ) ;;

    *"-O"* )

      build_warnings="${build_warnings} -Wuninitialized"

    ;;

  esac

else

  build_warnings="${build_warnings} -Wuninitialized"

fi

# Up for debate: -Wswitch -Wcomment -trigraphs -Wtrigraphs

# -Wunused-function -Wunused-label -Wunused-variable -Wunused-value

# -Wchar-subscripts -Wtraditional -Wshadow -Wcast-qual

# -Wcast-align -Wwrite-strings -Wconversion -Wstrict-prototypes

# -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls

# -Woverloaded-virtual -Winline -Werror"

AC_ARG_ENABLE(build-warnings,

[  --enable-build-warnings Enable build-time compiler warnings if gcc is used],

[case "${enableval}" in

  yes)  ;;

  no)   build_warnings="-w";;

  ,*)   t=`echo "${enableval}" | sed -e "s/,/ /g"`

        build_warnings="${build_warnings} ${t}";;

  *,)   t=`echo "${enableval}" | sed -e "s/,/ /g"`

        build_warnings="${t} ${build_warnings}";;

  *)    build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;

esac

if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then

  echo "Setting compiler warning flags = $build_warnings" 6>&1

fi])dnl

AC_ARG_ENABLE(sim-build-warnings,

[  --enable-gdb-build-warnings Enable SIM specific build-time compiler warnings if gcc is used],

[case "${enableval}" in

  yes)  ;;

  no)   build_warnings="-w";;

  ,*)   t=`echo "${enableval}" | sed -e "s/,/ /g"`

        build_warnings="${build_warnings} ${t}";;

  *,)   t=`echo "${enableval}" | sed -e "s/,/ /g"`

        build_warnings="${t} ${build_warnings}";;

  *)    build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;

esac

if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then

  echo "Setting GDB specific compiler warning flags = $build_warnings" 6>&1

fi])dnl

WARN_CFLAGS=""

WERROR_CFLAGS=""

if test "x${build_warnings}" != x -a "x$GCC" = xyes

then

    AC_MSG_CHECKING(compiler warning flags)

    # Separate out the -Werror flag as some files just cannot be

    # compiled with it enabled.

    for w in ${build_warnings}; do

        case $w in

        -Werr*) WERROR_CFLAGS=-Werror ;;

        *) # Check that GCC accepts it

            saved_CFLAGS="$CFLAGS"

            CFLAGS="$CFLAGS $w"

            AC_TRY_COMPILE([],[],WARN_CFLAGS="${WARN_CFLAGS} $w",)

            CFLAGS="$saved_CFLAGS"

        esac

    done

    AC_MSG_RESULT(${WARN_CFLAGS}${WERROR_CFLAGS})

fi

])

AC_SUBST(WARN_CFLAGS)

AC_SUBST(WERROR_CFLAGS)

dnl Generate the Makefile in a target specific directory.

dnl Substitutions aren't performed on the file in AC_SUBST_FILE,

dnl so this is a cover macro to tuck the details away of how we cope.

dnl We cope by having autoconf generate two files and then merge them into

dnl one afterwards.  The two pieces of the common fragment are inserted into

dnl the target's fragment at the appropriate points.

AC_DEFUN([SIM_AC_OUTPUT],

[

AC_LINK_FILES($sim_link_files, $sim_link_links)

dnl Make @cgen_breaks@ non-null only if the sim uses CGEN.

cgen_breaks=""

if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then

cgen_breaks="break cgen_rtx_error";

fi

AC_SUBST(cgen_breaks)

AC_CONFIG_FILES(Makefile.sim:Makefile.in)

AC_CONFIG_FILES(Make-common.sim:../common/Make-common.in)

AC_CONFIG_FILES(.gdbinit:../common/gdbinit.in)

AC_CONFIG_COMMANDS([Makefile],

[echo "Merging Makefile.sim+Make-common.sim into Makefile ..."

 rm -f Makesim1.tmp Makesim2.tmp Makefile

 sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp

 sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp

 sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \

        -e '/^## COMMON_POST_/ r Makesim2.tmp' \

        <Makefile.sim >Makefile

 rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp

])

AC_CONFIG_COMMANDS([stamp-h], [echo > stamp-h])

AC_OUTPUT

])

sinclude(../../config/gettext-sister.m4)

sinclude(../../config/acx.m4)

dnl --enable-cgen-maint support

AC_DEFUN([SIM_AC_OPTION_CGEN_MAINT],

[

cgen_maint=no

dnl Default is to use one in build tree.

cgen=guile

cgendir='$(srcdir)/../../cgen'

dnl Having --enable-maintainer-mode take arguments is another way to go.

dnl ??? One can argue --with is more appropriate if one wants to specify

dnl a directory name, but what we're doing here is an enable/disable kind

dnl of thing and specifying both --enable and --with is klunky.

dnl If you reeely want this to be --with, go ahead and change it.

AC_ARG_ENABLE(cgen-maint,

[  --enable-cgen-maint[=DIR]    build cgen generated files],

[case "${enableval}" in

  yes)  cgen_maint=yes ;;

  no)   cgen_maint=no ;;

  *)

        # argument is cgen install directory (not implemented yet).

        # Having a `share' directory might be more appropriate for the .scm,

        # .cpu, etc. files.

        cgendir=${cgen_maint}/lib/cgen

        cgen=guile

        ;;

esac])dnl

dnl AM_CONDITIONAL(CGEN_MAINT, test x${cgen_maint} != xno)

if test x${cgen_maint} != xno ; then

  CGEN_MAINT=''

else

  CGEN_MAINT='#'

fi

AC_SUBST(CGEN_MAINT)

AC_SUBST(cgendir)

AC_SUBST(cgen)

])