Subversion Repositories openrisc_me

# Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,

# 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010

# Free Software Foundation, Inc.

# This file is part of GDB.

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 3 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program.  If not, see .

prefix = @prefix@

exec_prefix = @exec_prefix@

host_alias = @host_alias@

target_alias = @target_alias@

program_transform_name = @program_transform_name@

bindir = @bindir@

libdir = @libdir@

tooldir = $(libdir)/$(target_alias)

datadir = @datadir@

localedir = @localedir@

mandir = @mandir@

man1dir = $(mandir)/man1

man2dir = $(mandir)/man2

man3dir = $(mandir)/man3

man4dir = $(mandir)/man4

man5dir = $(mandir)/man5

man6dir = $(mandir)/man6

man7dir = $(mandir)/man7

man8dir = $(mandir)/man8

man9dir = $(mandir)/man9

infodir = @infodir@

datarootdir = @datarootdir@

docdir = @docdir@

htmldir = @htmldir@

pdfdir = @pdfdir@

includedir = @includedir@

# This can be referenced by `LIBINTL' as computed by

# ZW_GNU_GETTEXT_SISTER_DIR.

top_builddir = .

SHELL = @SHELL@

EXEEXT = @EXEEXT@

AWK = @AWK@

LN_S = @LN_S@

INSTALL = @INSTALL@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_DATA = @INSTALL_DATA@

DESTDIR =

AR = @AR@

AR_FLAGS = qv

RANLIB = @RANLIB@

DLLTOOL = @DLLTOOL@

WINDRES = @WINDRES@

MIG = @MIG@

XGETTEXT = @XGETTEXT@

GMSGFMT = @GMSGFMT@

MSGMERGE = msgmerge

PACKAGE = @PACKAGE@

CATALOGS = @CATALOGS@

# If you are compiling with GCC, make sure that either 1) You have the

# fixed include files where GCC can reach them, or 2) You use the

# -traditional flag.  Otherwise the ioctl calls in inflow.c

# will be incorrectly compiled.  The "fixincludes" script in the gcc

# distribution will fix your include files up.

CC=@CC@

# Dependency tracking information.

DEPMODE = @CCDEPMODE@

DEPDIR = @DEPDIR@

depcomp = $(SHELL) $(srcdir)/../depcomp

# Note that these are overridden by GNU make-specific code below if

# GNU make is used.  The overrides implement dependency tracking.

COMPILE.pre = $(CC)

COMPILE.post = -c -o $@

COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)

POSTCOMPILE = @true

# Directory containing source files.

srcdir = @srcdir@

VPATH = @srcdir@

YACC=@YACC@

# This is used to rebuild ada-lex.c from ada-lex.l.  If the program is

# not defined, but ada-lex.c is present, compilation will continue,

# possibly with a warning.

FLEX = flex

YLWRAP = $(srcdir)/../ylwrap

# where to find makeinfo, preferably one designed for texinfo-2

MAKEINFO=makeinfo

MAKEHTML = $(MAKEINFO) --html

MAKEHTMLFLAGS =

# Set this up with gcc if you have gnu ld and the loader will print out

# line numbers for undefined references.

#CC_LD=gcc -static

CC_LD=$(CC)

# Where is our "include" directory?  Typically $(srcdir)/../include.

# This is essentially the header file directory for the library

# routines in libiberty.

INCLUDE_DIR =  $(srcdir)/../include

INCLUDE_CFLAGS = -I$(INCLUDE_DIR)

# Where is the "-liberty" library?  Typically in ../libiberty.

LIBIBERTY = ../libiberty/libiberty.a

# Where is the BFD library?  Typically in ../bfd.

BFD_DIR = ../bfd

BFD = $(BFD_DIR)/libbfd.a

BFD_SRC = $(srcdir)/$(BFD_DIR)

BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)

# Where is the decnumber library?  Typically in ../libdecnumber.

LIBDECNUMBER_DIR = ../libdecnumber

LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a

LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)

LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)

# Where is the READLINE library?  Typically in ../readline.

READLINE_DIR = ../readline

READLINE_SRC = $(srcdir)/$(READLINE_DIR)

READLINE = @READLINE@

READLINE_DEPS = @READLINE_DEPS@

READLINE_CFLAGS = @READLINE_CFLAGS@

# Where is expat?  This will be empty if expat was not available.

LIBEXPAT = @LIBEXPAT@

WARN_CFLAGS = @WARN_CFLAGS@

WERROR_CFLAGS = @WERROR_CFLAGS@

GDB_WARN_CFLAGS = $(WARN_CFLAGS)

GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)

GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " | sed "s/ -Wformat-nonliteral / /g"`

RDYNAMIC = @RDYNAMIC@

# Where is the INTL library?  Typically in ../intl.

INTL = @LIBINTL@

INTL_DEPS = @LIBINTL_DEP@

INTL_CFLAGS = @INCINTL@

# Did the user give us a --with-sysroot option?

TARGET_SYSTEM_ROOT = @TARGET_SYSTEM_ROOT@

TARGET_SYSTEM_ROOT_DEFINE = @TARGET_SYSTEM_ROOT_DEFINE@

# Did the user give us a --with-gdb-datadir option?

GDB_DATADIR = @GDB_DATADIR@

# Helper code from gnulib.

LIBGNU = gnulib/libgnu.a

INCGNU = -I$(srcdir)/gnulib -Ignulib

# Generated headers in the gnulib directory.  These must be listed

# so that they are generated before other files are compiled.

GNULIB_H = gnulib/string.h @GNULIB_STDINT_H@

#

# CLI sub directory definitons

#

SUBDIR_CLI_OBS = \

        cli-dump.o \

        cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \

        cli-logging.o \

        cli-interp.o

SUBDIR_CLI_SRCS = \

        cli/cli-dump.c \

        cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \

        cli/cli-logging.c \

        cli/cli-interp.c

SUBDIR_CLI_DEPS =

SUBDIR_CLI_LDFLAGS=

SUBDIR_CLI_CFLAGS=

#

# MI sub directory definitons

#

SUBDIR_MI_OBS = \

        mi-out.o mi-console.o \

        mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \

        mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \

        mi-interp.o \

        mi-main.o mi-parse.o mi-getopt.o

SUBDIR_MI_SRCS = \

        mi/mi-out.c mi/mi-console.c \

        mi/mi-cmds.c mi/mi-cmd-env.c \

        mi/mi-cmd-var.c mi/mi-cmd-break.c mi/mi-cmd-stack.c \

        mi/mi-cmd-file.c mi/mi-cmd-disas.c mi/mi-symbol-cmds.c \

        mi/mi-cmd-target.c mi/mi-interp.c \

        mi/mi-main.c mi/mi-parse.c mi/mi-getopt.c

SUBDIR_MI_DEPS =

SUBDIR_MI_LDFLAGS=

SUBDIR_MI_CFLAGS= \

        -DMI_OUT=1

#

# TUI sub directory definitions

#

# Name of the TUI program

TUI=gdbtui

SUBDIR_TUI_OBS = \

        tui-command.o \

        tui-data.o \

        tui-disasm.o \

        tui-file.o tui.o \

        tui-hooks.o \

        tui-interp.o \

        tui-io.o \

        tui-layout.o \

        tui-out.o \

        tui-regs.o \

        tui-source.o \

        tui-stack.o \

        tui-win.o \

        tui-windata.o \

        tui-wingeneral.o \

        tui-winsource.o

SUBDIR_TUI_SRCS = \

        tui/tui-command.c \

        tui/tui-data.c \

        tui/tui-disasm.c \

        tui/tui-file.c \

        tui/tui-hooks.c \

        tui/tui-interp.c \

        tui/tui-io.c \

        tui/tui-layout.c \

        tui/tui-out.c \

        tui/tui-regs.c \

        tui/tui-source.c \

        tui/tui-stack.c \

        tui/tui-win.c \

        tui/tui-windata.c \

        tui/tui-wingeneral.c \

        tui/tui-winsource.c \

        tui/tui.c

SUBDIR_TUI_DEPS =

SUBDIR_TUI_LDFLAGS=

SUBDIR_TUI_CFLAGS= \

        -DTUI=1

#

# python sub directory definitons

#

SUBDIR_PYTHON_OBS = \

        python.o \

        py-auto-load.o \

        py-block.o \

        py-breakpoint.o \

        py-cmd.o \

        py-frame.o \

        py-function.o \

        py-inferior.o \

        py-infthread.o \

        py-lazy-string.o \

        py-objfile.o \

        py-param.o \

        py-prettyprint.o \

        py-progspace.o \

        py-symbol.o \

        py-symtab.o \

        py-type.o \

        py-utils.o \

        py-value.o

SUBDIR_PYTHON_SRCS = \

        python/python.c \

        python/py-auto-load.c \

        python/py-block.c \

        python/py-breakpoint.c \

        python/py-cmd.c \

        python/py-frame.c \

        python/py-function.c \

        python/py-inferior.c \

        python/py-infthread.c \

        python/py-lazy-string.c \

        python/py-objfile.c \

        python/py-param.c \

        python/py-prettyprint.c \

        python/py-progspace.c \

        python/py-symbol.c \

        python/py-symtab.c \

        python/py-type.c \

        python/py-utils.c \

        python/py-value.c

SUBDIR_PYTHON_DEPS =

SUBDIR_PYTHON_LDFLAGS=

SUBDIR_PYTHON_CFLAGS=

# Opcodes currently live in one of two places.  Either they are in the

# opcode library, typically ../opcodes, or they are in a header file

# in INCLUDE_DIR.

# Where is the "-lopcodes" library, with (some of) the opcode tables and

# disassemblers?

OPCODES_DIR = ../opcodes

OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)

OPCODES = $(OPCODES_DIR)/libopcodes.a

# Where are the other opcode tables which only have header file

# versions?

OP_INCLUDE = $(INCLUDE_DIR)/opcode

# Some source files like to use #include "opcodes/file.h"

OPCODES_CFLAGS = -I$(OP_INCLUDE) -I$(OPCODES_SRC)/..

# The simulator is usually nonexistent; targets that include one

# should set this to list all the .o or .a files to be linked in.

SIM = @SIM@

WIN32LIBS = @WIN32LIBS@

# Tcl et al cflags and libraries

TCL = @TCL_LIBRARY@

TCL_CFLAGS = @TCL_INCLUDE@

GDBTKLIBS = @GDBTKLIBS@

# Extra flags that the GDBTK files need:

GDBTK_CFLAGS = @GDBTK_CFLAGS@

TK = @TK_LIBRARY@

TK_CFLAGS = @TK_INCLUDE@

X11_CFLAGS = @TK_XINCLUDES@

X11_LDFLAGS =

X11_LIBS =

WIN32LDAPP = @WIN32LDAPP@

LIBGUI = @LIBGUI@

GUI_CFLAGS_X = @GUI_CFLAGS_X@

IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)

ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)

# The version of gdbtk we're building. This should be kept

# in sync with GDBTK_VERSION and friends in gdbtk.h.

GDBTK_VERSION = 1.0

GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)

# Gdbtk requires an absolute path to the source directory or

# the testsuite won't run properly.

GDBTK_SRC_DIR = @GDBTK_SRC_DIR@

SUBDIR_GDBTK_OBS = \

        gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \

        gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o

SUBDIR_GDBTK_SRCS = \

        gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-bp.c \

        gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c \

        gdbtk/generic/gdbtk-interp.c \

        gdbtk/generic/gdbtk-register.c gdbtk/generic/gdbtk-stack.c \

        gdbtk/generic/gdbtk-varobj.c gdbtk/generic/gdbtk-wrapper.c \

        gdbtk/generic/gdbtk-main.c

SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)

SUBDIR_GDBTK_LDFLAGS=

SUBDIR_GDBTK_CFLAGS= -DGDBTK

CONFIG_OBS= @CONFIG_OBS@

CONFIG_SRCS= @CONFIG_SRCS@

CONFIG_DEPS= @CONFIG_DEPS@

CONFIG_LDFLAGS= @CONFIG_LDFLAGS@

ENABLE_CFLAGS= @ENABLE_CFLAGS@

CONFIG_ALL= @CONFIG_ALL@

CONFIG_CLEAN= @CONFIG_CLEAN@

CONFIG_INSTALL = @CONFIG_INSTALL@

CONFIG_UNINSTALL = @CONFIG_UNINSTALL@

# -I. for config files.

# -I$(srcdir) for gdb internal headers.

# -I$(srcdir)/config for more generic config files.

# It is also possible that you will need to add -I/usr/include/sys if

# your system doesn't have fcntl.h in /usr/include (which is where it

# should be according to Posix).

DEFS = @DEFS@

GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \

        -DLOCALEDIR="\"$(localedir)\"" $(DEFS)

# MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.

GLOBAL_CFLAGS = $(MH_CFLAGS)

PROFILE_CFLAGS = @PROFILE_CFLAGS@

# CFLAGS is specifically reserved for setting from the command line

# when running make.  I.E.  "make CFLAGS=-Wmissing-prototypes".

CFLAGS = @CFLAGS@

# Set by configure, for e.g. expat.

INTERNAL_CPPFLAGS = @CPPFLAGS@

# Need to pass this to testsuite for "make check".  Probably should be

# consistent with top-level Makefile.in and gdb/testsuite/Makefile.in

# so "make check" has the same result no matter where it is run.

CXXFLAGS = -g -O

# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.

INTERNAL_CFLAGS_BASE = \

        $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \

        $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \

        $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \

        $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)

INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)

INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)

# LDFLAGS is specifically reserved for setting from the command line

# when running make.

LDFLAGS = @LDFLAGS@

# Profiling options need to go here to work.

# I think it's perfectly reasonable for a user to set -pg in CFLAGS

# and have it work; that's why CFLAGS is here.

# PROFILE_CFLAGS is _not_ included, however, because we use monstartup.

INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_LDFLAGS)

# If your system is missing alloca(), or, more likely, it's there but

# it doesn't work, then refer to libiberty.

# Libraries and corresponding dependencies for compiling gdb.

# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.

# LIBIBERTY appears twice on purpose.

# If you have the Cygnus libraries installed,

# you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='

INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty -ldecnumber \

        $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \

        -lintl -liberty $(LIBGNU)

CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \

        $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \

        $(LIBEXPAT) \

        $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)

CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \

        $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)

ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)

ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)

DIST=gdb

LINT=/usr/5bin/lint

LINTFLAGS= $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \

        $(BFD_CFLAGS) $(INCLUDE_CFLAGS) \

        $(INTL_CFLAGS)

RUNTEST = runtest

RUNTESTFLAGS=

# XML files to build in to GDB.

XMLFILES = $(srcdir)/features/gdb-target.dtd $(srcdir)/features/xinclude.dtd \

        $(srcdir)/features/library-list.dtd $(srcdir)/features/osdata.dtd \

        $(srcdir)/features/threads.dtd

# This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX

# interface to the serial port.  Hopefully if get ported to OS/2, VMS,

# etc., then there will be (as part of the C library or perhaps as

# part of libiberty) a POSIX interface.  But at least for now the

# host-dependent makefile fragment might need to use something else

# besides ser-unix.o

SER_HARDWIRE = @SER_HARDWIRE@

# The `remote' debugging target is supported for most architectures,

# but not all (e.g. 960)

REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o

# This is remote-sim.o if a simulator is to be linked in.

SIM_OBS = @SIM_OBS@

# Target-dependent object files.

TARGET_OBS = @TARGET_OBS@

# All target-dependent objects files that require 64-bit CORE_ADDR

# (used with --enable-targets=all --enable-64-bit-bfd).

ALL_64_TARGET_OBS = \

        alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \

        alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \

        amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \

        amd64-linux-tdep.o amd64nbsd-tdep.o \

        amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \

        ia64-linux-tdep.o ia64-tdep.o \

        mips64obsd-tdep.o \

        sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \

        sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o

# All other target-dependent objects files (used with --enable-targets=all).

ALL_TARGET_OBS = \

        armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \

        armnbsd-tdep.o armobsd-tdep.o \

        arm-tdep.o arm-wince-tdep.o \

        avr-tdep.o \

        cris-tdep.o \

        dicos-tdep.o \

        frv-linux-tdep.o frv-tdep.o \

        h8300-tdep.o \

        hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \

        hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \

        i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \

        i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \

        i386-sol2-tdep.o i386-tdep.o i387-tdep.o \

        i386-dicos-tdep.o i386-darwin-tdep.o \

        iq2000-tdep.o \

        linux-tdep.o \

        lm32-tdep.o \

        m32c-tdep.o \

        m32r-linux-tdep.o m32r-tdep.o \

        m68hc11-tdep.o \

        m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \

        m88k-tdep.o \

        mep-tdep.o \

        microblaze-tdep.o microblaze-linux-tdep.o \

        mips-irix-tdep.o mips-linux-tdep.o \

        mipsnbsd-tdep.o mips-tdep.o \

        mn10300-linux-tdep.o mn10300-tdep.o \

        moxie-tdep.o \

        mt-tdep.o \

        nto-tdep.o \

        ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \

        rs6000-aix-tdep.o rs6000-tdep.o \

        s390-tdep.o \

        score-tdep.o \

        sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \

        sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \

        sparc-sol2-tdep.o sparc-tdep.o \

        spu-tdep.o spu-multiarch.o solib-spu.o \

        v850-tdep.o \

        vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \

        xstormy16-tdep.o \

        xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \

        glibc-tdep.o \

        bsd-uthread.o \

        nbsd-tdep.o obsd-tdep.o \

        sol2-tdep.o \

        solib-frv.o solib-irix.o solib-svr4.o solib-target.o \

        solib-som.o solib-pa64.o solib-darwin.o \

        dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \

        remote-m32r-sdi.o \

        xcoffread.o \

        symfile-mem.o \

        corelow.o \

        windows-tdep.o \

        linux-record.o

# Host-dependent makefile fragment comes in here.

@host_makefile_frag@

# End of host-dependent makefile fragment

FLAGS_TO_PASS = \

        "prefix=$(prefix)" \

        "exec_prefix=$(exec_prefix)" \

        "infodir=$(infodir)" \

        "datarootdir=$(datarootdir)" \

        "docdir=$(docdir)" \

        "htmldir=$(htmldir)" \

        "pdfdir=$(pdfdir)" \

        "libdir=$(libdir)" \

        "mandir=$(mandir)" \

        "datadir=$(datadir)" \

        "includedir=$(includedir)" \

        "against=$(against)" \

        "DESTDIR=$(DESTDIR)" \

        "AR=$(AR)" \

        "AR_FLAGS=$(AR_FLAGS)" \

        "CC=$(CC)" \

        "CFLAGS=$(CFLAGS)" \

        "CXX=$(CXX)" \

        "CXXFLAGS=$(CXXFLAGS)" \

        "DLLTOOL=$(DLLTOOL)" \

        "LDFLAGS=$(LDFLAGS)" \

        "RANLIB=$(RANLIB)" \

        "MAKEINFO=$(MAKEINFO)" \

        "MAKEHTML=$(MAKEHTML)" \

        "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \

        "INSTALL=$(INSTALL)" \

        "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \

        "INSTALL_DATA=$(INSTALL_DATA)" \

        "RUNTEST=$(RUNTEST)" \

        "RUNTESTFLAGS=$(RUNTESTFLAGS)"

# Flags that we pass when building the testsuite.

# empty for native, $(target_alias)/ for cross

target_subdir = @target_subdir@

CC_FOR_TARGET = ` \

  if [ -f $${rootme}/../gcc/xgcc ] ; then \

    if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \

      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \

    else \

      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \

    fi; \

  else \

    if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \

      echo $(CC); \

    else \

      t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \

    fi; \

  fi`

CXX = gcc

CXX_FOR_TARGET = ` \

  if [ -f $${rootme}/../gcc/xgcc ] ; then \

    if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \

      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \

    else \

      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \

    fi; \

  else \

    if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \

      echo $(CXX); \

    else \

      t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \

    fi; \

  fi`

# The use of $$(x_FOR_TARGET) reduces the command line length by not

# duplicating the lengthy definition.

TARGET_FLAGS_TO_PASS = \

        "prefix=$(prefix)" \

        "exec_prefix=$(exec_prefix)" \

        "against=$(against)" \

        'CC=$$(CC_FOR_TARGET)' \

        "CC_FOR_TARGET=$(CC_FOR_TARGET)" \

        "CFLAGS=$(CFLAGS)" \

        'CXX=$$(CXX_FOR_TARGET)' \

        "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \

        "CXXFLAGS=$(CXXFLAGS)" \

        "INSTALL=$(INSTALL)" \

        "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \

        "INSTALL_DATA=$(INSTALL_DATA)" \

        "MAKEINFO=$(MAKEINFO)" \

        "MAKEHTML=$(MAKEHTML)" \

        "RUNTEST=$(RUNTEST)" \

        "RUNTESTFLAGS=$(RUNTESTFLAGS)" \

        "FORCE_PARALLEL=$(FORCE_PARALLEL)"

# All source files that go into linking GDB.

# Links made at configuration time should not be specified here, since

# SFILES is used in building the distribution archive.

SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \

        addrmap.c \

        auxv.c ax-general.c ax-gdb.c \

        bcache.c \

        bfd-target.c \

        block.c blockframe.c breakpoint.c buildsym.c \

        c-exp.y c-lang.c c-typeprint.c c-valprint.c \

        charset.c cli-out.c coffread.c coff-pe-read.c \

        complaints.c completer.c corefile.c \

        cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \

        d-lang.c d-valprint.c \

        cp-name-parser.y \

        dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \

        dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \

        elfread.c environ.c eval.c event-loop.c event-top.c \

        exceptions.c expprint.c \

        f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \

        findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \

        gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \

        inf-loop.c \

        infcall.c \

        infcmd.c inflow.c infrun.c \

        inline-frame.c \

        interps.c \

        jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \

        language.c linespec.c \

        m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \

        macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \

        mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \

        mi/mi-common.c \

        objc-exp.y objc-lang.c \

        objfiles.c osabi.c observer.c osdata.c \

        p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \

        proc-service.list progspace.c \

        prologue-value.c psymtab.c \

        regcache.c reggroups.c remote.c remote-fileio.c reverse.c \

        scm-exp.c scm-lang.c scm-valprint.c \

        sentinel-frame.c \

        serial.c ser-base.c ser-unix.c \

        solib.c solib-target.c source.c \

        stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \

        symtab.c \

        target.c target-descriptions.c target-memory.c \

        thread.c top.c tracepoint.c \

        trad-frame.c \

        tramp-frame.c \

        typeprint.c \

        ui-out.c utils.c ui-file.h ui-file.c \

        user-regs.c \

        valarith.c valops.c valprint.c value.c varobj.c vec.c \

        wrapper.c \

        xml-tdesc.c xml-support.c \

        inferior.c gdb_usleep.c \

        record.c gcore.c \

        jit.c \

        xml-syscall.c \

LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c

# Header files that need to have srcdir added.  Note that in the cases

# where we use a macro like $(gdbcmd_h), things are carefully arranged

# so that each .h file is listed exactly once (M-x tags-search works

# wrong if TAGS has files twice).  Because this is tricky to get

# right, it is probably easiest just to list .h files here directly.

HFILES_NO_SRCDIR = osf-share/cma_debug_client.h \

osf-share/HP800/cma_thread_io.h osf-share/cma_sequence.h \

osf-share/cma_mutex.h osf-share/cma_semaphore_defs.h \

osf-share/cma_list.h osf-share/cma_handle.h osf-share/cma_stack.h \

osf-share/cma_util.h osf-share/RIOS/cma_thread_io.h \

osf-share/cma_errors.h osf-share/cma_tcb_defs.h osf-share/cma_attr.h \

osf-share/cma_stack_int.h osf-share/cma_init.h \

osf-share/cma_deb_core.h osf-share/AT386/cma_thread_io.h \

osf-share/cma_sched.h proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \

cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \

exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h \

i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \

ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \

c-lang.h d-lang.h frame.h event-loop.h block.h cli/cli-setshow.h        \

cli/cli-decode.h cli/cli-cmds.h cli/cli-dump.h \

cli/cli-script.h macrotab.h symtab.h version.h gnulib/wchar.in.h \

gnulib/string.in.h gnulib/str-two-way.h \

gnulib/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver/win32-low.h \

gdbserver/i387-fp.h gdbserver/server.h gdbserver/terminal.h \

gdbserver/mem-break.h gdbserver/wincecompat.h gdbserver/target.h \

gdbserver/linux-low.h gdbserver/gdb_proc_service.h \

gdbserver/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \

amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \

gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h \

mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \

ser-unix.h scm-lang.h inf-ptrace.h terminal.h ui-out.h frame-base.h \

f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \

objfiles.h vec.h disasm.h mips-tdep.h ser-base.h \

gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \

inflow.h fbsd-nat.h libunwind-frame.h completer.h inf-ttrace.h \

solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \

m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \

target.h prologue-value.h cp-abi.h tui/tui-hooks.h tui/tui.h \

tui/tui-file.h tui/tui-command.h tui/tui-disasm.h tui/tui-wingeneral.h \

tui/tui-windata.h tui/tui-data.h tui/tui-win.h tui/tui-stack.h \

tui/tui-winsource.h tui/tui-regs.h tui/tui-io.h tui/tui-layout.h \

tui/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h \

expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \

call-cmds.h typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \

mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \

complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \

gdb_wait.h gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \

interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \

amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \

sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \

coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \

m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \

doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \

gdb_locale.h gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \

language.h nbsd-tdep.h wrapper.h solib-svr4.h \

macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \

inf-child.h p-lang.h event-top.h gdbtypes.h scm-tags.h user-regs.h \

regformats/regdef.h config/alpha/nm-osf3.h  config/i386/nm-i386gnu.h \

config/i386/nm-fbsd.h \

config/nm-nto.h config/sparc/nm-sol2.h config/nm-linux.h \

config/rs6000/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \

annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \

remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \

sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \

gdb_usleep.h jit.h xml-syscall.h ada-operator.inc microblaze-tdep.h \

psymtab.h psympriv.h

# Header files that already have srcdir in them, or which are in objdir.

HFILES_WITH_SRCDIR = ../bfd/bfd.h

# GDB "info" files, which should be included in their entirety

INFOFILES = gdb.info*

REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar

# {X,T,NAT}DEPFILES are something of a pain in that it's hard to

# default their values the way we do for SER_HARDWIRE; in the future

# maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other

# variables analogous to SER_HARDWIRE which get defaulted in this

# Makefile.in

DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) \

           $(REMOTE_OBS) $(SIM_OBS)

SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)

# Don't include YYFILES (*.c) because we already include *.y in SFILES,

# and it's more useful to see it in the .y file.

TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \

        $(CONFIG_SRCS)

TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)

COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \

        version.o \

        annotate.o \

        addrmap.o \

        auxv.o \

        bfd-target.o \

        blockframe.o breakpoint.o findvar.o regcache.o \

        charset.o disasm.o dummy-frame.o dfp.o \

        source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \

        block.o symtab.o psymtab.o symfile.o symmisc.o linespec.o dictionary.o \

        infcall.o \

        infcmd.o infrun.o \

        expprint.o environ.o stack.o thread.o \

        exceptions.o \

        filesystem.o \

        inf-child.o \

        interps.o \

        main.o \

        macrotab.o macrocmd.o macroexp.o macroscope.o \

        mi-common.o \

        event-loop.o event-top.o inf-loop.o completer.o \

        gdbarch.o arch-utils.o gdbtypes.o osabi.o copying.o \

        memattr.o mem-break.o target.o parse.o language.o buildsym.o \

        findcmd.o \

        std-regs.o \

        signals.o \

        exec.o reverse.o \

        bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \

        dbxread.o coffread.o coff-pe-read.o \

        dwarf2read.o mipsread.o stabsread.o corefile.o \

        dwarf2expr.o dwarf2loc.o dwarf2-frame.o \

        ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \

        ada-tasks.o \

        ui-out.o cli-out.o \

        varobj.o vec.o wrapper.o \

        jv-lang.o jv-valprint.o jv-typeprint.o \

        m2-lang.o p-lang.o p-typeprint.o p-valprint.o \

        scm-exp.o scm-lang.o scm-valprint.o \

        sentinel-frame.o \

        complaints.o typeprint.o \

        ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \

        ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \

        m2-valprint.o \

        serial.o mdebugread.o top.o utils.o \

        ui-file.o \

        user-regs.o \

        frame.o frame-unwind.o doublest.o \

        frame-base.o \

        inline-frame.o \

        gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \

        cp-namespace.o \

        reggroups.o regset.o \

        trad-frame.o \

        tramp-frame.o \

        solib.o solib-target.o \

        prologue-value.o memory-map.o xml-support.o xml-syscall.o \

        target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \

        inferior.o osdata.o gdb_usleep.o record.o gcore.o \

        jit.o progspace.o

# Definitions for the syscall's XML files and dir

XML_SYSCALLS_DIR = syscalls/

XML_SYSCALLS_FILES = gdb-syscalls.dtd \

                     ppc-linux.xml ppc64-linux.xml \

                     i386-linux.xml amd64-linux.xml \

                     sparc-linux.xml sparc64-linux.xml

TSOBS = inflow.o

SUBDIRS = @subdirs@

CLEANDIRS = $(SUBDIRS) gnulib

# For now, shortcut the "configure GDB for fewer languages" stuff.

YYFILES = c-exp.c \

        cp-name-parser.c \

        objc-exp.c \

        ada-lex.c \

        ada-exp.c \

        jv-exp.c \

        f-exp.c m2-exp.c p-exp.c

YYOBJ = c-exp.o \

        cp-name-parser.o \

        objc-exp.o \

        ada-exp.o \

        jv-exp.o \

        f-exp.o m2-exp.o p-exp.o

# Things which need to be built when making a distribution.

DISTSTUFF = $(YYFILES)

# All generated files which can be included by another file.

generated_files = config.h observer.h observer.inc ada-lex.c \

        $(GNULIB_H) $(NAT_GENERATED_FILES)

.c.o:

        $(COMPILE) $<

        $(POSTCOMPILE)

all: gdb$(EXEEXT) $(CONFIG_ALL) xml-syscall-copy

        @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do

.PHONY: all-tui

all-tui: $(TUI)$(EXEEXT)

# This is needed for running GDB from the build directory

.PHONY: xml-syscall-copy

xml-syscall-copy:

        if [ "`cd $(srcdir) && pwd`" != "`pwd`" ] ; then \

          mkdir -p ./$(XML_SYSCALLS_DIR) ; \

          list='$(XML_SYSCALLS_FILES)' ; \

          for file in $$list ; do \

            f=$(srcdir)/$(XML_SYSCALLS_DIR)/$$file ; \

            if test -f $$f ; then \

              $(INSTALL_DATA) $$f \

                  ./$(XML_SYSCALLS_DIR) ; \

            fi ; \

          done ; \

        fi ;

# This target is responsible for properly installing the syscalls'

# XML files in the system.

.PHONY: xml-syscall-install

xml-syscall-install:

        $(SHELL) $(srcdir)/../mkinstalldirs \

                $(DESTDIR)$(GDB_DATADIR)/$(XML_SYSCALLS_DIR) ; \

        list='$(XML_SYSCALLS_FILES)' ; \

        for file in $$list ; do \