URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [gdb-7.2/] [sim/] [testsuite/] [sim/] [frv/] [testutils.inc] - Blame information for rev 373

Go to most recent revision | Details | Compare with Previous | View Log


# gr28-gr31, fr31, icc3, fcc3 are used as tmps.
# consider them call clobbered by these macros.
 
        .macro start
        .data
failmsg:
        .ascii "fail\n"
passmsg:
        .ascii "pass\n"
        .text
        .global _start
_start:
        ; enable data and insn caches in copy-back mode
        ; Also enable all registers
        or_spr_immed    0xc80003c0,hsr0
        and_spr_immed   0xfffff3ff,hsr0
 
        ; turn on psr.nem, psr.cm, psr.ef, psr.em, psr.esr,
        ; disable external interrupts
        or_spr_immed    0x69f8,psr
 
        ; If fsr exists, enable all fp_exceptions except inexact
        movsg           psr,gr28
        srli            gr28,28,gr28
        subicc          gr28,0x2,gr0,icc3 ; is fr400?
        beq             icc3,0,nofsr0
        or_spr_immed    0x3d000000,fsr0
nofsr0:
 
        ; Set the stack pointer
        sethi.p         0x7,sp
        setlo           0xfffc,sp       ; TODO -- what's a good value for this?
 
        ; Set the TBR address
        sethi.p         0xf,gr28
        setlo           0xf000,gr28
        movgs           gr28,tbr        ; TODO -- what's a good value for this?
 
        ; Go to user mode -- causes too many problems
        ;and_spr_immed  0xfffffffb,psr
        .endm
 
; Set GR with another GR
        .macro set_gr_gr src targ
        addi    \src,0,\targ
        .endm
 
; Set GR with immediate value
        .macro set_gr_immed val reg
        .if (\val >= -32768) && (\val <= 23767)
        setlos  \val,\reg
        .else
        setlo.p %lo(\val),\reg
        sethi   %hi(\val),\reg
        .endif
        .endm
 
        .macro set_gr_limmed valh vall reg
        sethi.p \valh,\reg
        setlo   \vall,\reg
        .endm
 
; Set GR with address value
        .macro set_gr_addr addr reg
        sethi.p %hi(\addr),\reg
        setlo   %lo(\addr),\reg
        .endm
 
; Set GR with SPR
        .macro set_gr_spr src targ
        movsg   \src,\targ
        .endm
 
; Set GR with a value from memory
        .macro set_gr_mem addr reg
        set_gr_addr     \addr,gr28
        ldi             @(gr28,0),\reg
        .endm
 
; Increment GR with immediate value
        .macro inc_gr_immed val reg
        .if (\val >= -2048) && (\val <= 2047)
        addi \reg,\val,\reg
        .else
        set_gr_immed \val,gr28
        add \reg,gr28,\reg
        .endif
        .endm
 
; AND GR with immediate value
        .macro and_gr_immed val reg
        .if (\val >= -2048) && (\val <= 2047)
        andi \reg,\val,\reg
        .else
        set_gr_immed \val,gr28
        and \reg,gr28,\reg
        .endif
        .endm
 
; OR GR with immediate value
        .macro or_gr_immed val reg
        .if (\val >= -2048) && (\val <= 2047)
        ori \reg,\val,\reg
        .else
        set_gr_immed \val,gr28
        or \reg,gr28,\reg
        .endif
        .endm
 
; Set FR with another FR
        .macro set_fr_fr src targ
        fmovs   \src,\targ
        .endm
 
; Set FR with integer immediate value
        .macro set_fr_iimmed valh vall reg
        set_gr_limmed   \valh,\vall,gr28
        movgf           gr28,\reg
        .endm
 
; Set FR with integer immediate value
        .macro set_fr_immed val reg
        set_gr_immed    \val,gr28
        movgf           gr28,\reg
        .endm
 
; Set FR with a value from memory
        .macro set_fr_mem addr reg
        set_gr_addr     \addr,gr28
        ldfi            @(gr28,0),\reg
        .endm
 
; Set double FR with another double FR
        .macro set_dfr_dfr src targ
        fmovd   \src,\targ
        .endm
 
; Set double FR with a value from memory
        .macro set_dfr_mem addr reg
        set_gr_addr     \addr,gr28
        lddfi           @(gr28,0),\reg
        .endm
 
; Set CPR with immediate value
        .macro set_cpr_immed val reg
        addi            sp,-4,gr28
        set_gr_immed    \val,gr29
        st              gr29,@(gr28,gr0)
        ldc             @(gr28,gr0),\reg
        .endm
 
        .macro set_cpr_limmed valh vall reg
        addi            sp,-4,gr28
        set_gr_limmed   \valh,\vall,gr29
        st              gr29,@(gr28,gr0)
        ldc             @(gr28,gr0),\reg
        .endm
 
; Set SPR with immediate value
        .macro set_spr_immed val reg
        set_gr_immed    \val,gr28
        movgs           gr28,\reg
        .endm
 
        .macro set_spr_limmed valh vall reg
        set_gr_limmed   \valh,\vall,gr28
        movgs           gr28,\reg
        .endm
 
        .macro set_spr_addr addr reg
        set_gr_addr     \addr,gr28
        movgs           gr28,\reg
        .endm
 
; increment SPR with immediate value
        .macro inc_spr_immed val reg
        movsg           \reg,gr28
        inc_gr_immed    \val,gr28
        movgs           gr28,\reg
        .endm
 
; OR spr with immediate value
        .macro or_spr_immed val reg
        movsg           \reg,gr28
        set_gr_immed    \val,gr29
        or              gr28,gr29,gr28
        movgs           gr28,\reg
        .endm
 
; AND spr with immediate value
        .macro and_spr_immed val reg
        movsg           \reg,gr28
        set_gr_immed    \val,gr29
        and             gr28,gr29,gr28
        movgs           gr28,\reg
        .endm
 
; Set accumulator with immediate value
        .macro set_acc_immed val reg
        set_fr_immed    \val,fr31
        mwtacc          fr31,\reg
        .endm
 
; Set accumulator guard with immediate value
        .macro set_accg_immed val reg
        set_fr_immed    \val,fr31
        mwtaccg         fr31,\reg
        .endm
 
; Set memory with immediate value
        .macro set_mem_immed val base
        set_gr_immed    \val,gr28
        sti             gr28,@(\base,0)
        .endm
 
        .macro set_mem_limmed valh vall base
        set_gr_limmed   \valh,\vall,gr28
        sti             gr28,@(\base,0)
        .endm
 
; Set memory with GR value
        .macro set_mem_gr reg addr
        set_gr_addr     \addr,gr28
        sti             \reg,@(gr28,0)
        .endm
 
; Test the value of a general register against another general register
        .macro test_gr_gr reg1 reg2
        subcc \reg1,\reg2,gr0,icc3
        beq icc3,0,test_gr\@
        fail
test_gr\@:
        .endm
 
; Test the value of an immediate against a general register
        .macro test_gr_immed val reg
        .if (\val >= -512) && (\val <= 511)
        subicc \reg,\val,gr0,icc3
        .else
        set_gr_immed \val,gr28
        subcc \reg,gr28,gr0,icc3
        .endif
        beq icc3,0,test_gr\@
        fail
test_gr\@:
        .endm
 
        .macro test_gr_limmed valh vall reg
        set_gr_limmed \valh,\vall,gr28
        subcc \reg,gr28,gr0,icc3
        beq icc3,0,test_gr\@
        fail
test_gr\@:
        .endm
 
; Test the value of an floating register against an integer immediate
        .macro test_fr_limmed valh vall reg
        movfg           \reg,gr29
        set_gr_limmed   \valh,\vall,gr28
        subcc           gr29,gr28,gr0,icc3
        beq icc3,0,test_gr\@
        fail
test_gr\@:
        .endm
 
        .macro test_fr_iimmed val reg
        movfg           \reg,gr29
        set_gr_immed    \val,gr28
        subcc           gr29,gr28,gr0,icc3
        beq icc3,0,test_gr\@
        fail
test_gr\@:
        .endm
 
; Test the value of a floating register against another floating point register
        .macro test_fr_fr reg1 reg2
        fcmps   \reg1,\reg2,fcc3
        fbeq    fcc3,0,test_gr\@
        fail
test_gr\@:
        .endm
 
; Test the value of a double floating register against another
; double floating point register
        .macro test_dfr_dfr reg1 reg2
        fcmpd   \reg1,\reg2,fcc3
        fbeq    fcc3,0,test_gr\@
        fail
test_gr\@:
        .endm
 
; Test the value of a special purpose register against an integer immediate
        .macro test_spr_immed val reg
        movsg           \reg,gr29
        set_gr_immed    \val,gr28
        subcc           gr29,gr28,gr0,icc3
        beq icc3,0,test_gr\@
        fail
test_gr\@:
        .endm
 
        .macro test_spr_limmed valh vall reg
        movsg           \reg,gr29
        set_gr_limmed   \valh,\vall,gr28
        subcc           gr29,gr28,gr0,icc3
        beq icc3,0,test_gr\@
        fail
test_gr\@:
        .endm
 
        .macro test_spr_gr spr gr
        movsg           \spr,gr28
        test_gr_gr      \gr,gr28
        .endm
 
        .macro test_spr_addr addr reg
        movsg           \reg,gr29
        set_gr_addr     \addr,gr28
        test_gr_gr      gr28,gr29
        .endm
 
; Test spr bits masked and shifted against the given value
        .macro test_spr_bits    mask,shift,val,reg
        movsg           \reg,gr28
        set_gr_immed    \mask,gr29
        and             gr28,gr29,gr28
        srli            gr28,\shift,gr29
        test_gr_immed   \val,gr29
        .endm
 
 
; Test the value of an accumulator against an integer immediate
        .macro test_acc_immed val reg
        mrdacc          \reg,fr31
        test_fr_iimmed  \val,fr31
        .endm
 
; Test the value of an accumulator against an integer immediate
        .macro test_acc_limmed valh vall reg
        mrdacc          \reg,fr31
        test_fr_limmed  \valh,\vall,fr31
        .endm
 
; Test the value of an accumulator guard against an integer immediate
        .macro test_accg_immed val reg
        mrdaccg         \reg,fr31
        test_fr_iimmed  \val,fr31
        .endm
 
; Test CPR agains an immediate value
        .macro test_cpr_limmed valh vall reg
        addi            sp,-4,gr31
        stc             \reg,@(gr31,gr0)
        test_mem_limmed \valh,\vall,gr31
        .endm
 
; Test the value of an immediate against memory
        .macro test_mem_immed val base
        ldi             @(\base,0),gr29
        .if (\val >= -512) && (\val <= 511)
        subicc gr29,\val,gr0,icc3
        .else
        set_gr_immed \val,gr28
        subcc gr29,gr28,gr0,icc3
        .endif
        beq icc3,0,test_gr\@
        fail
test_gr\@:
        .endm
 
        .macro test_mem_limmed valh vall base
        ldi             @(\base,0),gr29
        set_gr_limmed \valh,\vall,gr28
        subcc gr29,gr28,gr0,icc3
        beq icc3,0,test_gr\@
        fail
test_gr\@:
        .endm
 
; Set an integer condition code
        .macro set_icc mask iccno
        set_gr_immed    4,gr29
        smuli           gr29,\iccno,gr30
        addi            gr31,16,gr31
        set_gr_immed    0xf,gr28
        sll             gr28,gr31,gr28
        not             gr28,gr28
        movsg           ccr,gr29
        and             gr28,gr29,gr29
        set_gr_immed    \mask,gr28
        sll             gr28,gr31,gr28
        or              gr28,gr29,gr29
        movgs           gr29,ccr
        .endm
; started here
; Test the condition codes
        .macro test_icc N Z V C iccno
        .if (\N == 1)
        bp   \iccno,0,fail\@
        .else
        bn   \iccno,0,fail\@
        .endif
        .if (\Z == 1)
        bne  \iccno,0,fail\@
        .else
        beq   \iccno,0,fail\@
        .endif
        .if (\V == 1)
        bnv \iccno,0,fail\@
        .else
        bv   \iccno,0,fail\@
        .endif
        .if (\C == 1)
        bnc   \iccno,0,fail\@
        .else
        bc   \iccno,0,fail\@
        .endif
        bra test_cc\@
fail\@:
        fail
test_cc\@:
        .endm
 
; Set an floating point condition code
        .macro set_fcc mask fccno
        set_gr_immed    4,gr29
        smuli           gr29,\fccno,gr30
        set_gr_immed    0xf,gr28
        sll             gr28,gr31,gr28
        not             gr28,gr28
        movsg           ccr,gr29
        and             gr28,gr29,gr29
        set_gr_immed    \mask,gr28
        sll             gr28,gr31,gr28
        or              gr28,gr29,gr29
        movgs           gr29,ccr
        .endm
 
; Test the condition codes
        .macro test_fcc val fccno
        set_gr_immed    4,gr29
        smuli           gr29,\fccno,gr30
        movsg           ccr,gr29
        srl             gr29,gr31,gr29
        andi            gr29,0xf,gr29
        test_gr_immed   \val,gr29
        .endm
 
; Set PSR.ET
        .macro set_psr_et val
        movsg           psr,gr28
        .if (\val == 1)
        ori             gr28,1,gr28             ; Turn on SPR.ET
        .else
        andi            gr28,0xfffffffe,gr28    ; Turn off SPR.ET
        .endif
        movgs           gr28,psr
        .endm
 
; Floating point constants
        .macro float_constants
f0:             .float  0.0
f1:             .float  1.0
f2:             .float  2.0
f3:             .float  3.0
f6:             .float  6.0
f9:             .float  9.0
fn0:            .float  -0.0
fn1:            .float  -1.0
finf:           .long   0x7f800000
fninf:          .long   0xff800000
fmax:           .long   0x7f7fffff
fmin:           .long   0xff7fffff
feps:           .long   0x00400000
fneps:          .long   0x80400000
fnan1:          .long   0x7fc00000
fnan2:          .long   0x7f800001
        .endm
 
        .macro double_constants
d0:             .double 0.0
d1:             .double 1.0
d2:             .double 2.0
d3:             .double 3.0
d6:             .double 6.0
d9:             .double 9.0
dn0:            .double -0.0
dn1:            .double -1.0
dinf:           .long   0x7ff00000
                .long   0x00000000
dninf:          .long   0xfff00000
                .long   0x00000000
dmax:           .long   0x7fefffff
                .long   0xffffffff
dmin:           .long   0xffefffff
                .long   0xffffffff
deps:           .long   0x00080000
                .long   0x00000000
dneps:          .long   0x80080000
                .long   0x00000000
dnan1:          .long   0x7ff80000
                .long   0x00000000
dnan2:          .long   0x7ff00000
                .long   0x00000001
        .endm
 
; Load floating point constants
        .macro load_float_constants
        set_fr_mem      fninf,fr0
        set_fr_mem      fmin,fr4
        set_fr_mem      fn1,fr8
        set_fr_mem      fneps,fr12
        set_fr_mem      fn0,fr16
        set_fr_mem      f0,fr20
        set_fr_mem      feps,fr24
        set_fr_mem      f1,fr28
        set_fr_mem      f2,fr32
        set_fr_mem      f3,fr36
        set_fr_mem      f6,fr40
        set_fr_mem      f9,fr44
        set_fr_mem      fmax,fr48
        set_fr_mem      finf,fr52
        set_fr_mem      fnan1,fr56
        set_fr_mem      fnan2,fr60
        .endm
 
        .macro load_float_constants1
        set_fr_mem      fninf,fr1
        set_fr_mem      fmin,fr5
        set_fr_mem      fn1,fr9
        set_fr_mem      fneps,fr13
        set_fr_mem      fn0,fr17
        set_fr_mem      f0,fr21
        set_fr_mem      feps,fr25
        set_fr_mem      f1,fr29
        set_fr_mem      f2,fr33
        set_fr_mem      f3,fr37
        set_fr_mem      f6,fr41
        set_fr_mem      f9,fr45
        set_fr_mem      fmax,fr49
        set_fr_mem      finf,fr53
        set_fr_mem      fnan1,fr57
        set_fr_mem      fnan2,fr61
        .endm
 
        .macro load_float_constants2
        set_fr_mem      fninf,fr2
        set_fr_mem      fmin,fr6
        set_fr_mem      fn1,fr10
        set_fr_mem      fneps,fr14
        set_fr_mem      fn0,fr18
        set_fr_mem      f0,fr22
        set_fr_mem      feps,fr26
        set_fr_mem      f1,fr30
        set_fr_mem      f2,fr34
        set_fr_mem      f3,fr38
        set_fr_mem      f6,fr42
        set_fr_mem      f9,fr46
        set_fr_mem      fmax,fr50
        set_fr_mem      finf,fr54
        set_fr_mem      fnan1,fr58
        set_fr_mem      fnan2,fr62
        .endm
 
        .macro load_float_constants3
        set_fr_mem      fninf,fr3
        set_fr_mem      fmin,fr7
        set_fr_mem      fn1,fr11
        set_fr_mem      fneps,fr15
        set_fr_mem      fn0,fr19
        set_fr_mem      f0,fr23
        set_fr_mem      feps,fr27
        set_fr_mem      f1,fr31
        set_fr_mem      f2,fr35
        set_fr_mem      f3,fr39
        set_fr_mem      f6,fr43
        set_fr_mem      f9,fr47
        set_fr_mem      fmax,fr51
        set_fr_mem      finf,fr55
        set_fr_mem      fnan1,fr59
        set_fr_mem      fnan2,fr63
        .endm
 
        .macro load_double_constants
        set_dfr_mem     dninf,fr0
        set_dfr_mem     dmin,fr4
        set_dfr_mem     dn1,fr8
        set_dfr_mem     dneps,fr12
        set_dfr_mem     dn0,fr16
        set_dfr_mem     d0,fr20
        set_dfr_mem     deps,fr24
        set_dfr_mem     d1,fr28
        set_dfr_mem     d2,fr32
        set_dfr_mem     d3,fr36
        set_dfr_mem     d6,fr40
        set_dfr_mem     d9,fr44
        set_dfr_mem     dmax,fr48
        set_dfr_mem     dinf,fr52
        set_dfr_mem     dnan1,fr56
        set_dfr_mem     dnan2,fr60
        .endm
 
; Lock the insn cache at the given address
        .macro lock_insn_cache address
        icpl            \address,gr0,1
        .endm
 
; Lock the data cache at the given address
        .macro lock_data_cache address
        dcpl            \address,gr0,1
        .endm
 
; Invalidate the data cache at the given address
        .macro invalidate_data_cache address
        dci             @(\address,gr0)
        .endm
 
; Flush the data cache at the given address
        .macro flush_data_cache address
        dcf             @(\address,gr0)
        .endm
 
; Write a bctrlr 0,0 insn at the address contained in the given register
        .macro set_bctrlr_0_0 address
        set_mem_immed   0x80382000,\address     ; bctrlr 0,0
        flush_data_cache \address
        .endm
 
; Exit with return code
        .macro exit rc
        setlos          #1,gr7
        set_gr_immed    \rc,gr8
        tira            gr0,#0
        .endm
 
; Pass the test case
        .macro pass
pass\@:
        setlos.p        #5,gr10
        setlos          #1,gr8
        setlos          #5,gr7
        set_gr_addr     passmsg,gr9
        tira            gr0,#0
        exit            #0
        .endm
 
; Fail the testcase
        .macro fail
fail\@:
        setlos.p        #5,gr10
        setlos          #1,gr8
        setlos          #5,gr7
        set_gr_addr     failmsg,gr9
        tira            gr0,#0
        exit            #1
        .endm

Browse

Tools

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [gdb-7.2/] [sim/] [testsuite/] [sim/] [frv/] [testutils.inc] - Blame information for rev 373

Line No.	Rev	Author	Line
1	330	jeremybenn	`# gr28-gr31, fr31, icc3, fcc3 are used as tmps.`
2			`# consider them call clobbered by these macros.`
3
4			`.macro start`
5			`.data`
6			`failmsg:`
7			`.ascii "fail\n"`
8			`passmsg:`
9			`.ascii "pass\n"`
10			`.text`
11			`.global _start`
12			`_start:`
13			`; enable data and insn caches in copy-back mode`
14			`; Also enable all registers`
15			`or_spr_immed 0xc80003c0,hsr0`
16			`and_spr_immed 0xfffff3ff,hsr0`
17
18			`; turn on psr.nem, psr.cm, psr.ef, psr.em, psr.esr,`
19			`; disable external interrupts`
20			`or_spr_immed 0x69f8,psr`
21
22			`; If fsr exists, enable all fp_exceptions except inexact`
23			`movsg psr,gr28`
24			`srli gr28,28,gr28`
25			`subicc gr28,0x2,gr0,icc3 ; is fr400?`
26			`beq icc3,0,nofsr0`
27			`or_spr_immed 0x3d000000,fsr0`
28			`nofsr0:`
29
30			`; Set the stack pointer`
31			`sethi.p 0x7,sp`
32			`setlo 0xfffc,sp ; TODO -- what's a good value for this?`
33
34			`; Set the TBR address`
35			`sethi.p 0xf,gr28`
36			`setlo 0xf000,gr28`
37			`movgs gr28,tbr ; TODO -- what's a good value for this?`
38
39			`; Go to user mode -- causes too many problems`
40			`;and_spr_immed 0xfffffffb,psr`
41			`.endm`
42
43			`; Set GR with another GR`
44			`.macro set_gr_gr src targ`
45			`addi \src,0,\targ`
46			`.endm`
47
48			`; Set GR with immediate value`
49			`.macro set_gr_immed val reg`
50			`.if (\val >= -32768) && (\val <= 23767)`
51			`setlos \val,\reg`
52			`.else`
53			`setlo.p %lo(\val),\reg`
54			`sethi %hi(\val),\reg`
55			`.endif`
56			`.endm`
57
58			`.macro set_gr_limmed valh vall reg`
59			`sethi.p \valh,\reg`
60			`setlo \vall,\reg`
61			`.endm`
62
63			`; Set GR with address value`
64			`.macro set_gr_addr addr reg`
65			`sethi.p %hi(\addr),\reg`
66			`setlo %lo(\addr),\reg`
67			`.endm`
68
69			`; Set GR with SPR`
70			`.macro set_gr_spr src targ`
71			`movsg \src,\targ`
72			`.endm`
73
74			`; Set GR with a value from memory`
75			`.macro set_gr_mem addr reg`
76			`set_gr_addr \addr,gr28`
77			`ldi @(gr28,0),\reg`
78			`.endm`
79
80			`; Increment GR with immediate value`
81			`.macro inc_gr_immed val reg`
82			`.if (\val >= -2048) && (\val <= 2047)`
83			`addi \reg,\val,\reg`
84			`.else`
85			`set_gr_immed \val,gr28`
86			`add \reg,gr28,\reg`
87			`.endif`
88			`.endm`
89
90			`; AND GR with immediate value`
91			`.macro and_gr_immed val reg`
92			`.if (\val >= -2048) && (\val <= 2047)`
93			`andi \reg,\val,\reg`
94			`.else`
95			`set_gr_immed \val,gr28`
96			`and \reg,gr28,\reg`
97			`.endif`
98			`.endm`
99
100			`; OR GR with immediate value`
101			`.macro or_gr_immed val reg`
102			`.if (\val >= -2048) && (\val <= 2047)`
103			`ori \reg,\val,\reg`
104			`.else`
105			`set_gr_immed \val,gr28`
106			`or \reg,gr28,\reg`
107			`.endif`
108			`.endm`
109
110			`; Set FR with another FR`
111			`.macro set_fr_fr src targ`
112			`fmovs \src,\targ`
113			`.endm`
114
115			`; Set FR with integer immediate value`
116			`.macro set_fr_iimmed valh vall reg`
117			`set_gr_limmed \valh,\vall,gr28`
118			`movgf gr28,\reg`
119			`.endm`
120
121			`; Set FR with integer immediate value`
122			`.macro set_fr_immed val reg`
123			`set_gr_immed \val,gr28`
124			`movgf gr28,\reg`
125			`.endm`
126
127			`; Set FR with a value from memory`
128			`.macro set_fr_mem addr reg`
129			`set_gr_addr \addr,gr28`
130			`ldfi @(gr28,0),\reg`
131			`.endm`
132
133			`; Set double FR with another double FR`
134			`.macro set_dfr_dfr src targ`
135			`fmovd \src,\targ`
136			`.endm`
137
138			`; Set double FR with a value from memory`
139			`.macro set_dfr_mem addr reg`
140			`set_gr_addr \addr,gr28`
141			`lddfi @(gr28,0),\reg`
142			`.endm`
143
144			`; Set CPR with immediate value`
145			`.macro set_cpr_immed val reg`
146			`addi sp,-4,gr28`
147			`set_gr_immed \val,gr29`
148			`st gr29,@(gr28,gr0)`
149			`ldc @(gr28,gr0),\reg`
150			`.endm`
151
152			`.macro set_cpr_limmed valh vall reg`
153			`addi sp,-4,gr28`
154			`set_gr_limmed \valh,\vall,gr29`
155			`st gr29,@(gr28,gr0)`
156			`ldc @(gr28,gr0),\reg`
157			`.endm`
158
159			`; Set SPR with immediate value`
160			`.macro set_spr_immed val reg`
161			`set_gr_immed \val,gr28`
162			`movgs gr28,\reg`
163			`.endm`
164
165			`.macro set_spr_limmed valh vall reg`
166			`set_gr_limmed \valh,\vall,gr28`
167			`movgs gr28,\reg`
168			`.endm`
169
170			`.macro set_spr_addr addr reg`
171			`set_gr_addr \addr,gr28`
172			`movgs gr28,\reg`
173			`.endm`
174
175			`; increment SPR with immediate value`
176			`.macro inc_spr_immed val reg`
177			`movsg \reg,gr28`
178			`inc_gr_immed \val,gr28`
179			`movgs gr28,\reg`
180			`.endm`
181
182			`; OR spr with immediate value`
183			`.macro or_spr_immed val reg`
184			`movsg \reg,gr28`
185			`set_gr_immed \val,gr29`
186			`or gr28,gr29,gr28`
187			`movgs gr28,\reg`
188			`.endm`
189
190			`; AND spr with immediate value`
191			`.macro and_spr_immed val reg`
192			`movsg \reg,gr28`
193			`set_gr_immed \val,gr29`
194			`and gr28,gr29,gr28`
195			`movgs gr28,\reg`
196			`.endm`
197
198			`; Set accumulator with immediate value`
199			`.macro set_acc_immed val reg`
200			`set_fr_immed \val,fr31`
201			`mwtacc fr31,\reg`
202			`.endm`
203
204			`; Set accumulator guard with immediate value`
205			`.macro set_accg_immed val reg`
206			`set_fr_immed \val,fr31`
207			`mwtaccg fr31,\reg`
208			`.endm`
209
210			`; Set memory with immediate value`
211			`.macro set_mem_immed val base`
212			`set_gr_immed \val,gr28`
213			`sti gr28,@(\base,0)`
214			`.endm`
215
216			`.macro set_mem_limmed valh vall base`
217			`set_gr_limmed \valh,\vall,gr28`
218			`sti gr28,@(\base,0)`
219			`.endm`
220
221			`; Set memory with GR value`
222			`.macro set_mem_gr reg addr`
223			`set_gr_addr \addr,gr28`
224			`sti \reg,@(gr28,0)`
225			`.endm`
226
227			`; Test the value of a general register against another general register`
228			`.macro test_gr_gr reg1 reg2`
229			`subcc \reg1,\reg2,gr0,icc3`
230			`beq icc3,0,test_gr\@`
231			`fail`
232			`test_gr\@:`
233			`.endm`
234
235			`; Test the value of an immediate against a general register`
236			`.macro test_gr_immed val reg`
237			`.if (\val >= -512) && (\val <= 511)`
238			`subicc \reg,\val,gr0,icc3`
239			`.else`
240			`set_gr_immed \val,gr28`
241			`subcc \reg,gr28,gr0,icc3`
242			`.endif`
243			`beq icc3,0,test_gr\@`
244			`fail`
245			`test_gr\@:`
246			`.endm`
247
248			`.macro test_gr_limmed valh vall reg`
249			`set_gr_limmed \valh,\vall,gr28`
250			`subcc \reg,gr28,gr0,icc3`
251			`beq icc3,0,test_gr\@`
252			`fail`
253			`test_gr\@:`
254			`.endm`
255
256			`; Test the value of an floating register against an integer immediate`
257			`.macro test_fr_limmed valh vall reg`
258			`movfg \reg,gr29`
259			`set_gr_limmed \valh,\vall,gr28`
260			`subcc gr29,gr28,gr0,icc3`
261			`beq icc3,0,test_gr\@`
262			`fail`
263			`test_gr\@:`
264			`.endm`
265
266			`.macro test_fr_iimmed val reg`
267			`movfg \reg,gr29`
268			`set_gr_immed \val,gr28`
269			`subcc gr29,gr28,gr0,icc3`
270			`beq icc3,0,test_gr\@`
271			`fail`
272			`test_gr\@:`
273			`.endm`
274
275			`; Test the value of a floating register against another floating point register`
276			`.macro test_fr_fr reg1 reg2`
277			`fcmps \reg1,\reg2,fcc3`
278			`fbeq fcc3,0,test_gr\@`
279			`fail`
280			`test_gr\@:`
281			`.endm`
282
283			`; Test the value of a double floating register against another`
284			`; double floating point register`
285			`.macro test_dfr_dfr reg1 reg2`
286			`fcmpd \reg1,\reg2,fcc3`
287			`fbeq fcc3,0,test_gr\@`
288			`fail`
289			`test_gr\@:`
290			`.endm`
291
292			`; Test the value of a special purpose register against an integer immediate`
293			`.macro test_spr_immed val reg`
294			`movsg \reg,gr29`
295			`set_gr_immed \val,gr28`
296			`subcc gr29,gr28,gr0,icc3`
297			`beq icc3,0,test_gr\@`
298			`fail`
299			`test_gr\@:`
300			`.endm`
301
302			`.macro test_spr_limmed valh vall reg`
303			`movsg \reg,gr29`
304			`set_gr_limmed \valh,\vall,gr28`
305			`subcc gr29,gr28,gr0,icc3`
306			`beq icc3,0,test_gr\@`
307			`fail`
308			`test_gr\@:`
309			`.endm`
310
311			`.macro test_spr_gr spr gr`
312			`movsg \spr,gr28`
313			`test_gr_gr \gr,gr28`
314			`.endm`
315
316			`.macro test_spr_addr addr reg`
317			`movsg \reg,gr29`
318			`set_gr_addr \addr,gr28`
319			`test_gr_gr gr28,gr29`
320			`.endm`
321
322			`; Test spr bits masked and shifted against the given value`
323			`.macro test_spr_bits mask,shift,val,reg`
324			`movsg \reg,gr28`
325			`set_gr_immed \mask,gr29`
326			`and gr28,gr29,gr28`
327			`srli gr28,\shift,gr29`
328			`test_gr_immed \val,gr29`
329			`.endm`
330
331
332			`; Test the value of an accumulator against an integer immediate`
333			`.macro test_acc_immed val reg`
334			`mrdacc \reg,fr31`
335			`test_fr_iimmed \val,fr31`
336			`.endm`
337
338			`; Test the value of an accumulator against an integer immediate`
339			`.macro test_acc_limmed valh vall reg`
340			`mrdacc \reg,fr31`
341			`test_fr_limmed \valh,\vall,fr31`
342			`.endm`
343
344			`; Test the value of an accumulator guard against an integer immediate`
345			`.macro test_accg_immed val reg`
346			`mrdaccg \reg,fr31`
347			`test_fr_iimmed \val,fr31`
348			`.endm`
349
350			`; Test CPR agains an immediate value`
351			`.macro test_cpr_limmed valh vall reg`
352			`addi sp,-4,gr31`
353			`stc \reg,@(gr31,gr0)`
354			`test_mem_limmed \valh,\vall,gr31`
355			`.endm`
356
357			`; Test the value of an immediate against memory`
358			`.macro test_mem_immed val base`
359			`ldi @(\base,0),gr29`
360			`.if (\val >= -512) && (\val <= 511)`
361			`subicc gr29,\val,gr0,icc3`
362			`.else`
363			`set_gr_immed \val,gr28`
364			`subcc gr29,gr28,gr0,icc3`
365			`.endif`
366			`beq icc3,0,test_gr\@`
367			`fail`
368			`test_gr\@:`
369			`.endm`
370
371			`.macro test_mem_limmed valh vall base`
372			`ldi @(\base,0),gr29`
373			`set_gr_limmed \valh,\vall,gr28`
374			`subcc gr29,gr28,gr0,icc3`
375			`beq icc3,0,test_gr\@`
376			`fail`
377			`test_gr\@:`
378			`.endm`
379
380			`; Set an integer condition code`
381			`.macro set_icc mask iccno`
382			`set_gr_immed 4,gr29`
383			`smuli gr29,\iccno,gr30`
384			`addi gr31,16,gr31`
385			`set_gr_immed 0xf,gr28`
386			`sll gr28,gr31,gr28`
387			`not gr28,gr28`
388			`movsg ccr,gr29`
389			`and gr28,gr29,gr29`
390			`set_gr_immed \mask,gr28`
391			`sll gr28,gr31,gr28`
392			`or gr28,gr29,gr29`
393			`movgs gr29,ccr`
394			`.endm`
395			`; started here`
396			`; Test the condition codes`
397			`.macro test_icc N Z V C iccno`
398			`.if (\N == 1)`
399			`bp \iccno,0,fail\@`
400			`.else`
401			`bn \iccno,0,fail\@`
402			`.endif`
403			`.if (\Z == 1)`
404			`bne \iccno,0,fail\@`
405			`.else`
406			`beq \iccno,0,fail\@`
407			`.endif`
408			`.if (\V == 1)`
409			`bnv \iccno,0,fail\@`
410			`.else`
411			`bv \iccno,0,fail\@`
412			`.endif`
413			`.if (\C == 1)`
414			`bnc \iccno,0,fail\@`
415			`.else`
416			`bc \iccno,0,fail\@`
417			`.endif`
418			`bra test_cc\@`
419			`fail\@:`
420			`fail`
421			`test_cc\@:`
422			`.endm`
423
424			`; Set an floating point condition code`
425			`.macro set_fcc mask fccno`
426			`set_gr_immed 4,gr29`
427			`smuli gr29,\fccno,gr30`
428			`set_gr_immed 0xf,gr28`
429			`sll gr28,gr31,gr28`
430			`not gr28,gr28`
431			`movsg ccr,gr29`
432			`and gr28,gr29,gr29`
433			`set_gr_immed \mask,gr28`
434			`sll gr28,gr31,gr28`
435			`or gr28,gr29,gr29`
436			`movgs gr29,ccr`
437			`.endm`
438
439			`; Test the condition codes`
440			`.macro test_fcc val fccno`
441			`set_gr_immed 4,gr29`
442			`smuli gr29,\fccno,gr30`
443			`movsg ccr,gr29`
444			`srl gr29,gr31,gr29`
445			`andi gr29,0xf,gr29`
446			`test_gr_immed \val,gr29`
447			`.endm`
448
449			`; Set PSR.ET`
450			`.macro set_psr_et val`
451			`movsg psr,gr28`
452			`.if (\val == 1)`
453			`ori gr28,1,gr28 ; Turn on SPR.ET`
454			`.else`
455			`andi gr28,0xfffffffe,gr28 ; Turn off SPR.ET`
456			`.endif`
457			`movgs gr28,psr`
458			`.endm`
459
460			`; Floating point constants`
461			`.macro float_constants`
462			`f0: .float 0.0`
463			`f1: .float 1.0`
464			`f2: .float 2.0`
465			`f3: .float 3.0`
466			`f6: .float 6.0`
467			`f9: .float 9.0`
468			`fn0: .float -0.0`
469			`fn1: .float -1.0`
470			`finf: .long 0x7f800000`
471			`fninf: .long 0xff800000`
472			`fmax: .long 0x7f7fffff`
473			`fmin: .long 0xff7fffff`
474			`feps: .long 0x00400000`
475			`fneps: .long 0x80400000`
476			`fnan1: .long 0x7fc00000`
477			`fnan2: .long 0x7f800001`
478			`.endm`
479
480			`.macro double_constants`
481			`d0: .double 0.0`
482			`d1: .double 1.0`
483			`d2: .double 2.0`
484			`d3: .double 3.0`
485			`d6: .double 6.0`
486			`d9: .double 9.0`
487			`dn0: .double -0.0`
488			`dn1: .double -1.0`
489			`dinf: .long 0x7ff00000`
490			`.long 0x00000000`
491			`dninf: .long 0xfff00000`
492			`.long 0x00000000`
493			`dmax: .long 0x7fefffff`
494			`.long 0xffffffff`
495			`dmin: .long 0xffefffff`
496			`.long 0xffffffff`
497			`deps: .long 0x00080000`
498			`.long 0x00000000`
499			`dneps: .long 0x80080000`
500			`.long 0x00000000`
501			`dnan1: .long 0x7ff80000`
502			`.long 0x00000000`
503			`dnan2: .long 0x7ff00000`
504			`.long 0x00000001`
505			`.endm`
506
507			`; Load floating point constants`
508			`.macro load_float_constants`
509			`set_fr_mem fninf,fr0`
510			`set_fr_mem fmin,fr4`
511			`set_fr_mem fn1,fr8`
512			`set_fr_mem fneps,fr12`
513			`set_fr_mem fn0,fr16`
514			`set_fr_mem f0,fr20`
515			`set_fr_mem feps,fr24`
516			`set_fr_mem f1,fr28`
517			`set_fr_mem f2,fr32`
518			`set_fr_mem f3,fr36`
519			`set_fr_mem f6,fr40`
520			`set_fr_mem f9,fr44`
521			`set_fr_mem fmax,fr48`
522			`set_fr_mem finf,fr52`
523			`set_fr_mem fnan1,fr56`
524			`set_fr_mem fnan2,fr60`
525			`.endm`
526
527			`.macro load_float_constants1`
528			`set_fr_mem fninf,fr1`
529			`set_fr_mem fmin,fr5`
530			`set_fr_mem fn1,fr9`
531			`set_fr_mem fneps,fr13`
532			`set_fr_mem fn0,fr17`
533			`set_fr_mem f0,fr21`
534			`set_fr_mem feps,fr25`
535			`set_fr_mem f1,fr29`
536			`set_fr_mem f2,fr33`
537			`set_fr_mem f3,fr37`
538			`set_fr_mem f6,fr41`
539			`set_fr_mem f9,fr45`
540			`set_fr_mem fmax,fr49`
541			`set_fr_mem finf,fr53`
542			`set_fr_mem fnan1,fr57`
543			`set_fr_mem fnan2,fr61`
544			`.endm`
545
546			`.macro load_float_constants2`
547			`set_fr_mem fninf,fr2`
548			`set_fr_mem fmin,fr6`
549			`set_fr_mem fn1,fr10`
550			`set_fr_mem fneps,fr14`
551			`set_fr_mem fn0,fr18`
552			`set_fr_mem f0,fr22`
553			`set_fr_mem feps,fr26`
554			`set_fr_mem f1,fr30`
555			`set_fr_mem f2,fr34`
556			`set_fr_mem f3,fr38`
557			`set_fr_mem f6,fr42`
558			`set_fr_mem f9,fr46`
559			`set_fr_mem fmax,fr50`
560			`set_fr_mem finf,fr54`
561			`set_fr_mem fnan1,fr58`
562			`set_fr_mem fnan2,fr62`
563			`.endm`
564
565			`.macro load_float_constants3`
566			`set_fr_mem fninf,fr3`
567			`set_fr_mem fmin,fr7`
568			`set_fr_mem fn1,fr11`
569			`set_fr_mem fneps,fr15`
570			`set_fr_mem fn0,fr19`
571			`set_fr_mem f0,fr23`
572			`set_fr_mem feps,fr27`
573			`set_fr_mem f1,fr31`
574			`set_fr_mem f2,fr35`
575			`set_fr_mem f3,fr39`
576			`set_fr_mem f6,fr43`
577			`set_fr_mem f9,fr47`
578			`set_fr_mem fmax,fr51`
579			`set_fr_mem finf,fr55`
580			`set_fr_mem fnan1,fr59`
581			`set_fr_mem fnan2,fr63`
582			`.endm`
583
584			`.macro load_double_constants`
585			`set_dfr_mem dninf,fr0`
586			`set_dfr_mem dmin,fr4`
587			`set_dfr_mem dn1,fr8`
588			`set_dfr_mem dneps,fr12`
589			`set_dfr_mem dn0,fr16`
590			`set_dfr_mem d0,fr20`
591			`set_dfr_mem deps,fr24`
592			`set_dfr_mem d1,fr28`
593			`set_dfr_mem d2,fr32`
594			`set_dfr_mem d3,fr36`
595			`set_dfr_mem d6,fr40`
596			`set_dfr_mem d9,fr44`
597			`set_dfr_mem dmax,fr48`
598			`set_dfr_mem dinf,fr52`
599			`set_dfr_mem dnan1,fr56`
600			`set_dfr_mem dnan2,fr60`
601			`.endm`
602
603			`; Lock the insn cache at the given address`
604			`.macro lock_insn_cache address`
605			`icpl \address,gr0,1`
606			`.endm`
607
608			`; Lock the data cache at the given address`
609			`.macro lock_data_cache address`
610			`dcpl \address,gr0,1`
611			`.endm`
612
613			`; Invalidate the data cache at the given address`
614			`.macro invalidate_data_cache address`
615			`dci @(\address,gr0)`
616			`.endm`
617
618			`; Flush the data cache at the given address`
619			`.macro flush_data_cache address`
620			`dcf @(\address,gr0)`
621			`.endm`
622
623			`; Write a bctrlr 0,0 insn at the address contained in the given register`
624			`.macro set_bctrlr_0_0 address`
625			`set_mem_immed 0x80382000,\address ; bctrlr 0,0`
626			`flush_data_cache \address`
627			`.endm`
628
629			`; Exit with return code`
630			`.macro exit rc`
631			`setlos #1,gr7`
632			`set_gr_immed \rc,gr8`
633			`tira gr0,#0`
634			`.endm`
635
636			`; Pass the test case`
637			`.macro pass`
638			`pass\@:`
639			`setlos.p #5,gr10`
640			`setlos #1,gr8`
641			`setlos #5,gr7`
642			`set_gr_addr passmsg,gr9`
643			`tira gr0,#0`
644			`exit #0`
645			`.endm`
646
647			`; Fail the testcase`
648			`.macro fail`
649			`fail\@:`
650			`setlos.p #5,gr10`
651			`setlos #1,gr8`
652			`setlos #5,gr7`
653			`set_gr_addr failmsg,gr9`
654			`tira gr0,#0`
655			`exit #1`
656			`.endm`