Subversion Repositories openrisc_me

/*

 * vr5xxx.S -- CPU specific support routines

 *

 * Copyright (c) 1999 Cygnus Solutions

 *

 * The authors hereby grant permission to use, copy, modify, distribute,

 * and license this software and its documentation for any purpose, provided

 * that existing copyright notices are retained in all copies and that this

 * notice is included verbatim in any distributions. No written agreement,

 * license, or royalty fee is required for any of the authorized uses.

 * Modifications to this software may be copyrighted by their authors

 * and need not follow the licensing terms described here, provided that

 * the new terms are clearly indicated on the first page of each file where

 * they apply.

 */

/* This file cloned from vr4300.S by dlindsay@cygnus.com

 * and recoded to suit Vr5432 and Vr5000.

 * Should be no worse for Vr43{00,05,10}.

 * Specifically, __cpu_flush() has been changed (a) to allow for the hardware

 * difference (in set associativity) between the Vr5432 and Vr5000,

 * and (b) to flush the optional secondary cache of the Vr5000.

 */

/* Processor Revision Identifier (PRID) Register: Implementation Numbers */

#define IMPL_VR5432     0x54

/* Cache Constants not determinable dynamically */

#define VR5000_2NDLINE 32       /* secondary cache line size */

#define VR5432_LINE 32          /* I,Dcache line sizes */

#define VR5432_SIZE (16*1024)   /* I,Dcache half-size */

#ifndef __mips64

        .set mips3

#endif

#ifdef __mips16

/* This file contains 32 bit assembly code.  */

        .set nomips16

#endif

#include "regs.S"

        .text

        .align  2

        # Taken from "R4300 Preliminary RISC Processor Specification

        # Revision 2.0 January 1995" page 39: "The Count

        # register... increments at a constant rate... at one-half the

        # PClock speed."

        # We can use this fact to provide small polled delays.

        .globl  __cpu_timer_poll

        .ent    __cpu_timer_poll

__cpu_timer_poll:

        .set    noreorder

        # in:   a0 = (unsigned int) number of PClock ticks to wait for

        # out:  void

        # The Vr4300 counter updates at half PClock, so divide by 2 to

        # get counter delta:

        bnezl   a0, 1f          # continue if delta non-zero

        srl     a0, a0, 1       # divide ticks by 2             {DELAY SLOT}

        # perform a quick return to the caller:

        j       ra

        nop                     #                               {DELAY SLOT}

1:

        mfc0    v0, C0_COUNT    # get current counter value

        nop

        nop

        # We cannot just do the simple test, of adding our delta onto

        # the current value (ignoring overflow) and then checking for

        # equality. The counter is incrementing every two PClocks,

        # which means the counter value can change between

        # instructions, making it hard to sample at the exact value

        # desired.

        # However, we do know that our entry delta value is less than

        # half the number space (since we divide by 2 on entry). This

        # means we can use a difference in signs to indicate timer

        # overflow.

        addu    a0, v0, a0      # unsigned add (ignore overflow)

        # We know have our end value (which will have been

        # sign-extended to fill the 64bit register value).

2:

        # get current counter value:

        mfc0    v0, C0_COUNT

        nop

        nop

        # This is an unsigned 32bit subtraction:

        subu    v0, a0, v0      # delta = (end - now)           {DELAY SLOT}

        bgtzl   v0, 2b          # looping back is most likely

        nop

        # We have now been delayed (in the foreground) for AT LEAST

        # the required number of counter ticks.

        j       ra              # return to caller

        nop                     #                               {DELAY SLOT}

        .set    reorder

        .end    __cpu_timer_poll

        # Flush the processor caches to memory:

        .globl  __cpu_flush

        .ent    __cpu_flush

__cpu_flush:

        .set    noreorder

        # NOTE: The Vr4300 and Vr5432 *CANNOT* have any secondary cache.

        # On those, SC (bit 17 of CONFIG register) is hard-wired to 1,

        # except that email from Dennis_Han@el.nec.com says that old

        # versions of the Vr5432 incorrectly hard-wired this bit to 0.

        # The Vr5000 has an optional direct-mapped secondary cache,

        # and the SC bit correctly indicates this.

        # So, for the 4300 and 5432 we want to just

        # flush the primary Data and Instruction caches.

        # For the 5000 it is desired to flush the secondary cache too.

        # There is an operation difference worth noting.

        # The 4300 and 5000 primary caches use VA bit 14 to choose cache set,

        # whereas 5432 primary caches use VA bit 0.

        # This code interprets the relevant Config register bits as

        # much as possible, except for the 5432.

        # The code therefore has some portability.

        # However, the associativity issues mean you should not just assume

        # that this code works anywhere. Also, the secondary cache set

        # size is hardwired, since the 5000 series does not define codes

        # for variant sizes.

        # Note: this version of the code flushes D$ before I$.

        #   It is difficult to construct a case where that matters,

        #   but it cant hurt.

        mfc0    a0, C0_PRID     # a0 = Processor Revision register

        nop                     # dlindsay: unclear why the nops, but

        nop                     # vr4300.S had such so I do too.

        srl     a2, a0, PR_IMP  # want bits 8..15

        andi    a2, a2, 0x255   # mask: now a2 = Implementation # field

        li      a1, IMPL_VR5432

        beq     a1, a2, 8f      # use Vr5432-specific flush algorithm

        nop

        # Non-Vr5432 version of the code.

        # (The distinctions being: CONFIG is truthful about secondary cache,

        # and we act as if the primary Icache and Dcache are direct mapped.)

        mfc0    t0, C0_CONFIG   # t0 = CONFIG register

        nop

        nop

        li      a1, 1           # a1=1, a useful constant

        srl     a2, t0, CR_IC   # want IC field of CONFIG

        andi    a2, a2, 0x7     # mask: now a2= code for Icache size

        add     a2, a2, 12      # +12

        sllv    a2, a1, a2      # a2=primary instruction cache size in bytes

        srl     a3, t0, CR_DC   # DC field of CONFIG

        andi    a3, a3, 0x7     # mask: now a3= code for Dcache size

        add     a3, a3, 12      # +12

        sllv    a3, a1, a3      # a3=primary data cache size in bytes

        li      t2, (1 << CR_IB) # t2=mask over IB boolean

        and     t2, t2, t0      # test IB field of CONFIG register value

        beqz    t2, 1f          #

        li      a1, 16          # 16 bytes (branch shadow: always loaded.)

        li      a1, 32          # non-zero, then 32bytes

1:

        li      t2, (1 << CR_DB) # t2=mask over DB boolean

        and     t2, t2, t0      # test BD field of CONFIG register value

        beqz    t2, 2f          #

        li      a0, 16          # 16bytes (branch shadow: always loaded.)

        li      a0, 32          # non-zero, then 32bytes

2:

        lui     t1, ((K0BASE >> 16) & 0xFFFF)

        ori     t1, t1, (K0BASE & 0xFFFF)

        # At this point,

        # a0 = primary Dcache line size in bytes

        # a1 = primary Icache line size in bytes

        # a2 = primary Icache size in bytes

        # a3 = primary Dcache size in bytes

        # t0 = CONFIG value

        # t1 = a round unmapped cached base address (we are in kernel mode)

        # t2,t3 scratch

        addi    t3, t1, 0       # t3=t1=start address for any cache

        add     t2, t3, a3      # t2=end adress+1 of Dcache

        sub     t2, t2, a0      # t2=address of last line in Dcache

3:

        cache   INDEX_WRITEBACK_INVALIDATE_D,0(t3)

        bne     t3, t2, 3b      #

        addu    t3, a0          # (delay slot) increment by Dcache line size

        # Now check CONFIG to see if there is a secondary cache

        lui     t2, (1 << (CR_SC-16)) # t2=mask over SC boolean

        and     t2, t2, t0      # test SC in CONFIG

        bnez    t2, 6f

        # There is a secondary cache. Find out its sizes.

        srl     t3, t0, CR_SS   # want SS field of CONFIG

        andi    t3, t3, 0x3     # mask: now t3= code for cache size.

        beqz    t3, 4f

        lui     a3, ((512*1024)>>16)    # a3= 512K, code was 0

        addu    t3, -1                  # decrement code

        beqz    t3, 4f

        lui     a3, ((1024*1024)>>16)   # a3= 1 M, code  1

        addu    t3, -1                  # decrement code

        beqz    t3, 4f

        lui     a3, ((2*1024*1024)>>16) # a3= 2 M, code 2

        j       6f                      # no secondary cache, code 3

4:      # a3 = secondary cache size in bytes

        li      a0, VR5000_2NDLINE      # no codes assigned for other than 32

        # At this point,

        # a0 = secondary cache line size in bytes

        # a1 = primary Icache line size in bytes

        # a2 = primary Icache size in bytes

        # a3 = secondary cache size in bytes

        # t1 = a round unmapped cached base address (we are in kernel mode)

        # t2,t3 scratch

        addi    t3, t1, 0       # t3=t1=start address for any cache

        add     t2, t3, a3      # t2=end address+1 of secondary cache

        sub     t2, t2, a0      # t2=address of last line in secondary cache

5:

        cache   INDEX_WRITEBACK_INVALIDATE_SD,0(t3)

        bne     t3, t2, 5b

        addu    t3, a0          # (delay slot) increment by line size

6:      # Any optional secondary cache done.  Now do I-cache and return.

        # At this point,

        # a1 = primary Icache line size in bytes

        # a2 = primary Icache size in bytes

        # t1 = a round unmapped cached base address (we are in kernel mode)

        # t2,t3 scratch

        add     t2, t1, a2      # t2=end adress+1 of Icache

        sub     t2, t2, a1      # t2=address of last line in Icache

7:

        cache   INDEX_INVALIDATE_I,0(t1)

        bne     t1, t2, 7b

        addu    t1, a1          # (delay slot) increment by Icache line size

        j       ra      # return to the caller

        nop

8:

# Vr5432 version of the cpu_flush code.

# (The distinctions being: CONFIG can not be trusted about secondary

# cache (which does not exist). The primary caches use Virtual Address Bit 0

# to control set selection.

# Code does not consult CONFIG about cache sizes: knows the hardwired sizes.

# Since both I and D have the same size and line size, uses a merged loop.

        li      a0, VR5432_LINE

        li      a1, VR5432_SIZE

        lui     t1, ((K0BASE >> 16) & 0xFFFF)

        ori     t1, t1, (K0BASE & 0xFFFF)

        # a0 = cache line size in bytes

        # a1 = 1/2 cache size in bytes

        # t1 = a round unmapped cached base address (we are in kernel mode)

        add     t2, t1, a1      # t2=end address+1

        sub     t2, t2, a0      # t2=address of last line in Icache

9:

        cache   INDEX_WRITEBACK_INVALIDATE_D,0(t1)      # set 0

        cache   INDEX_WRITEBACK_INVALIDATE_D,1(t1)      # set 1

        cache   INDEX_INVALIDATE_I,0(t1)        # set 0

        cache   INDEX_INVALIDATE_I,1(t1)        # set 1

        bne     t1, t2, 9b

        addu    t1, a0

        j       ra      # return to the caller

        nop

        .set    reorder

        .end    __cpu_flush

        # NOTE: This variable should *NOT* be addressed relative to

        # the $gp register since this code is executed before $gp is

        # initialised... hence we leave it in the text area. This will

        # cause problems if this routine is ever ROMmed:

        .globl  __buserr_cnt

__buserr_cnt:

        .word   0

        .align  3

__k1_save:

        .word   0

        .word   0

        .align  2

        .ent __buserr

        .globl __buserr

__buserr:

        .set noat

        .set noreorder

        # k0 and k1 available for use:

        mfc0    k0,C0_CAUSE

        nop

        nop

        andi    k0,k0,0x7c

        sub     k0,k0,7 << 2

        beq     k0,$0,__buserr_do

        nop

        # call the previous handler

        la      k0,__previous

        jr      k0

        nop

        #

__buserr_do:

        # TODO: check that the cause is indeed a bus error

        # - if not then just jump to the previous handler

        la      k0,__k1_save

        sd      k1,0(k0)

        #

        la      k1,__buserr_cnt

        lw      k0,0(k1)        # increment counter

        addu    k0,1

        sw      k0,0(k1)

        #

        la      k0,__k1_save

        ld      k1,0(k0)

        #

        mfc0    k0,C0_EPC

        nop

        nop

        addu    k0,k0,4         # skip offending instruction

        mtc0    k0,C0_EPC       # update EPC

        nop

        nop

        eret

#        j       k0

#        rfe

        .set reorder

        .set at

        .end __buserr

__exception_code:

        .set noreorder

        lui     k0,%hi(__buserr)

        daddiu  k0,k0,%lo(__buserr)

        jr      k0

        nop

        .set reorder

__exception_code_end:

        .data

__previous:

        .space  (__exception_code_end - __exception_code)

        # This subtracting two addresses is working

        # but is not garenteed to continue working.

        # The assemble reserves the right to put these

        # two labels into different frags, and then

        # cant take their difference.

        .text

        .ent    __default_buserr_handler

        .globl  __default_buserr_handler

__default_buserr_handler:

        .set noreorder

        # attach our simple bus error handler:

        # in:  void

        # out: void

        mfc0    a0,C0_SR

        nop

        li      a1,SR_BEV

        and     a1,a1,a0

        beq     a1,$0,baseaddr

        lui     a0,0x8000       # delay slot

        lui     a0,0xbfc0

        daddiu  a0,a0,0x0200

baseaddr:

        daddiu  a0,a0,0x0180

        # a0 = base vector table address

        la      a1,__exception_code_end

        la      a2,__exception_code

        subu    a1,a1,a2

        la      a3,__previous

        # there must be a better way of doing this????

copyloop:

        lw      v0,0(a0)

        sw      v0,0(a3)

        lw      v0,0(a2)

        sw      v0,0(a0)

        daddiu  a0,a0,4

        daddiu  a2,a2,4

        daddiu  a3,a3,4

        subu    a1,a1,4

        bne     a1,$0,copyloop

        nop

        la      a0,__buserr_cnt

        sw      $0,0(a0)

        j       ra

        nop

        .set reorder

        .end    __default_buserr_handler

        .ent    __restore_buserr_handler

        .globl  __restore_buserr_handler

__restore_buserr_handler:

        .set noreorder

        # restore original (monitor) bus error handler

        # in:  void

        # out: void

        mfc0    a0,C0_SR

        nop

        li      a1,SR_BEV

        and     a1,a1,a0

        beq     a1,$0,res_baseaddr

        lui     a0,0x8000       # delay slot

        lui     a0,0xbfc0

        daddiu  a0,a0,0x0200

res_baseaddr:

        daddiu  a0,a0,0x0180

        # a0 = base vector table address

        la      a1,__exception_code_end

        la      a3,__exception_code

        subu    a1,a1,a3

        la      a3,__previous

        # there must be a better way of doing this????

res_copyloop:

        lw      v0,0(a3)

        sw      v0,0(a0)

        daddiu  a0,a0,4

        daddiu  a3,a3,4

        subu    a1,a1,4

        bne     a1,$0,res_copyloop

        nop

        j       ra

        nop

        .set reorder

        .end    __restore_buserr_handler

        .ent    __buserr_count

        .globl  __buserr_count

__buserr_count:

        .set noreorder

        # restore original (monitor) bus error handler

        # in:  void

        # out: unsigned int __buserr_cnt

        la      v0,__buserr_cnt

        lw      v0,0(v0)

        j       ra

        nop

        .set reorder

        .end    __buserr_count

/* EOF vr5xxx.S */